Kenneth D. Merry ce625ec719 Change the way that unmapped I/O capability is advertised. ... The previous method was to set the D_UNMAPPED_IO flag in the cdevsw for the driver. The problem with this is that in many cases (e.g. sa(4)) there may be some instances of the driver that can handle unmapped I/O and some that can't. The isp(4) driver can handle unmapped I/O, but the esp(4) driver currently cannot. The cdevsw is shared among all driver instances. So instead of setting a flag on the cdevsw, set a flag on the cdev. This allows drivers to indicate support for unmapped I/O on a per-instance basis. sys/conf.h: Remove the D_UNMAPPED_IO cdevsw flag and replace it with an SI_UNMAPPED cdev flag. kern_physio.c: Look at the cdev SI_UNMAPPED flag to determine whether or not a particular driver can handle unmapped I/O. geom_dev.c: Set the SI_UNMAPPED flag for all GEOM cdevs. Since GEOM will create a temporary mapping when needed, setting SI_UNMAPPED unconditionally will work. Remove the D_UNMAPPED_IO flag. nvme_ns.c: Set the SI_UNMAPPED flag on cdevs created here if NVME_UNMAPPED_BIO_SUPPORT is enabled. vfs_aio.c: In aio_qphysio(), check the SI_UNMAPPED flag on a cdev instead of the D_UNMAPPED_IO flag on the cdevsw. sys/param.h: Bump __FreeBSD_version to 1000045 for the switch from setting the D_UNMAPPED_IO flag in the cdevsw to setting SI_UNMAPPED in the cdev. Reviewed by: kib, jimharris MFC after: 1 week Sponsored by: Spectra Logic		2013-08-15 22:52:39 +00:00
..
bde
cache
concat
eli
gate	Remove extra bio_data and bio_length copying to child request after calling	2013-03-26 05:42:12 +00:00
journal	When panicing due to the gjournal overflow, print the geom metadata	2013-07-10 10:11:43 +00:00
label	- Use int8_t type for the mftrecsz field in g_label_ntfs. char type	2013-05-05 08:00:16 +00:00
linux_lvm
mirror	Fix the formatting of the error message.	2013-08-12 18:17:45 +00:00
mountver
multipath	Make GEOM MULTIPATH to report unmapped bio support if underling path report	2013-03-25 07:24:58 +00:00
nop	move the error report to a lower log level... Now you can see when it	2013-04-13 19:02:58 +00:00
part	gpt_entries is used as limit for the number of partition entries in	2013-08-08 16:09:20 +00:00
raid	Return error when opening read-only volumes (like RAID4/5/...) for writing.	2013-08-13 07:56:40 +00:00
raid3
sched
shsec
stripe
uncompress
uzip
vinum
virstor
zero
geom_aes.c
geom_bsd_enc.c
geom_bsd.c
geom_ccd.c
geom_ctl.c
geom_ctl.h
geom_dev.c	Change the way that unmapped I/O capability is advertised.	2013-08-15 22:52:39 +00:00
geom_disk.c	Bump disk(9) ABI version to signify the addition of d_delmaxsize by r249940.	2013-07-03 23:46:30 +00:00
geom_disk.h	Bump disk(9) ABI version to signify the addition of d_delmaxsize by r249940.	2013-07-03 23:46:30 +00:00
geom_dump.c	Remove an extra semicolon from the DOT language output.	2013-05-21 18:40:54 +00:00
geom_event.c	Make g_wither_washer() to not loop by itself, but only when there was some	2013-03-24 03:15:20 +00:00
geom_flashmap.c	MFP4 @222836	2013-05-30 01:19:02 +00:00
geom_fox.c
geom_int.h	Make g_wither_washer() to not loop by itself, but only when there was some	2013-03-24 03:15:20 +00:00
geom_io.c	- Add a general purpose resource allocator, vmem, from NetBSD. It was	2013-06-28 03:51:20 +00:00
geom_kern.c
geom_map.c
geom_mbr_enc.c
geom_mbr.c
geom_pc98_enc.c
geom_pc98.c	Change <sys/diskpc98.h> to not redefine the same symbols that are	2013-08-07 00:00:48 +00:00
geom_redboot.c
geom_slice.c	geom_slice.c and its consumers like GEOM_LABEL are not touching the data	2013-03-26 07:55:24 +00:00
geom_slice.h
geom_subr.c	Make g_wither_washer() to not loop by itself, but only when there was some	2013-03-24 03:15:20 +00:00
geom_sunlabel_enc.c
geom_sunlabel.c
geom_vfs.c
geom_vfs.h
geom_vol_ffs.c
geom.h
notes