freebsd/sys/scsi/sctarg.c

/*
 * sctarg: Target mode user interface
 *
 * Copyright (C) 1995, HD Associates, Inc.
 * PO Box 276
 * Pepperell, MA 01463
 * 508 433 5266
 * dufault@hda.com
 *
 * This code is contributed to the University of California at Berkeley:
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by the University of
 *	California, Berkeley and its contributors.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *      $Id: sctarg.c,v 1.21 1997/09/02 20:06:36 bde Exp $
 */

#include "opt_bounce.h"
#include "opt_scsi.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/buf.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#ifdef DEVFS
#include <sys/devfsext.h>
#endif /*DEVFS*/
#include <scsi/scsiconf.h>
#include <scsi/scsi_debug.h>
#include <scsi/scsi_driver.h>

#define OPEN 0x01

struct scsi_data {
	struct buf_queue_head buf_queue;
	int flags;					/* Already open */
};

static	d_open_t	sctargopen;
static	d_close_t	sctargclose;
static	d_ioctl_t	sctargioctl;
static	d_strategy_t	sctargstrategy;

#define CDEV_MAJOR 65
static struct cdevsw sctarg_cdevsw = 
	{ sctargopen,	sctargclose,	rawread,	rawwrite,	/*65*/
	  sctargioctl,	nostop,		nullreset,	nodevtotty,/* sctarg */
	  seltrue,	nommap,		sctargstrategy,	"sctarg", NULL,	-1 };

SCSI_DEVICE_ENTRIES(sctarg)

static errval sctarg_open(dev_t dev, int flags, int fmt, struct proc *p,
			  struct scsi_link *sc_link);
static void sctargstart(u_int32_t unit, u_int32_t unused_flags);
static void sctarg_strategy(struct buf *bp, struct scsi_link *sc_link);

static struct scsi_device sctarg_switch =
{
    NULL,
    sctargstart,			/* we have a queue, and this is how we service it */
    NULL,
    NULL,
    "sctarg",
    0,
	{0, 0},
	SDEV_ONCE_ONLY,
	0,
	"Processor Target",
	sctargopen,
    sizeof(struct scsi_data),
	T_TARGET,
	0,
	0,
	sctarg_open,
	0,
	0,
	sctarg_strategy,
};

static errval
sctarg_open(dev_t dev, int flags, int fmt, struct proc *p,
	    struct scsi_link *sc_link)
{
	int ret = 0;

	/* Does this host adapter support target mode operation?
	 */
	if ((sc_link->flags & SDEV_TARGET_OPS) == 0)
		return ENODEV;	/* Operation not supported */

	if (SCSI_FIXED(dev)) {
		sc_link->scsibus = SCSI_BUS(dev);
		scsi_set_bus(sc_link->scsibus, sc_link);

		sc_link->target = SCSI_ID(dev);
		sc_link->lun = SCSI_LUN(dev);
	}

	if (sc_link->scsibus == SCCONF_UNSPEC ||
		sc_link->target == SCCONF_UNSPEC ||
		sc_link->lun == SCCONF_UNSPEC)
			return ENXIO;

	/* XXX: You can have more than one target device on a single
	 * host adapter.  We need a reference count.
	 */
	if ((sc_link->sd->flags & OPEN) == 0)	/* Enable target mode */
	{
		ret = scsi_target_mode(sc_link, 1);
		sc_link->sd->flags |= OPEN;
	}

	return ret;
}

/*
 * sctargstart looks to see if there is a buf waiting for the device
 * and that the device is not already busy. If both are true,
 * It dequeues the buf and creates a scsi command to perform the
 * transfer required. The transfer request will call scsi_done
 * on completion, which will in turn call this routine again
 * so that the next queued transfer is performed.
 * The bufs are queued by the strategy routine (sctargstrategy)
 *
 * This routine is also called after other non-queued requests
 * have been made of the scsi driver, to ensure that the queue
 * continues to be drained.
 * sctargstart() is called at splbio
 */
static void
sctargstart(unit, unused_flags)
	u_int32_t	unit;
	u_int32_t	unused_flags;
{
	struct scsi_link *sc_link = SCSI_LINK(&sctarg_switch, unit);
	struct scsi_data *sctarg = sc_link->sd;
	register struct buf *bp = 0;
	struct
	{
#define PROCESSOR_SEND 0x0A
#define PROCESSOR_RECEIVE 0x08
		u_char	op_code;
		u_char	byte2;
		u_char	len[3];
		u_char	control;
	} cmd;

	u_int32_t flags;

	SC_DEBUG(sc_link, SDEV_DB2, ("sctargstart "));
	/*
	 * See if there is a buf to do and we are not already
	 * doing one
	 */
	while (sc_link->opennings != 0) {

		/* if a special awaits, let it proceed first */
		if (sc_link->flags & SDEV_WAITING) {
			sc_link->flags &= ~SDEV_WAITING;
			wakeup((caddr_t)sc_link);
			return;
		}

		bp = bufq_first(&sctarg->buf_queue);
		if (bp == NULL)
			return;
		bufq_remove(&sctarg->buf_queue, bp);

		/*
		 *  Fill out the scsi command
		 */
		bzero(&cmd, sizeof(cmd));
		flags = SCSI_TARGET;
		if ((bp->b_flags & B_READ) == B_WRITE) {
			cmd.op_code = PROCESSOR_SEND;
			flags |= SCSI_DATA_OUT;
		} else {
			cmd.op_code = PROCESSOR_RECEIVE;
			flags |= SCSI_DATA_IN;
		}

		scsi_uto3b(bp->b_bcount, cmd.len);
		/*
		 * go ask the adapter to do all this for us
		 */
		if (scsi_scsi_cmd(sc_link,
			(struct scsi_generic *) &cmd,
			sizeof(cmd),
			(u_char *) bp->b_un.b_addr,
			bp->b_bcount,
			0,
			100000,
			bp,
			flags | SCSI_NOSLEEP) == SUCCESSFULLY_QUEUED) {
		} else {
			printf("sctarg%ld: oops not queued\n", unit);
			bp->b_flags |= B_ERROR;
			bp->b_error = EIO;
			biodone(bp);
		}
	} /* go back and see if we can cram more work in.. */
}

static void
sctarg_strategy(struct buf *bp, struct scsi_link *sc_link)
{
	unsigned char unit;
	u_int32_t opri;
	struct scsi_data *sctarg;

	unit = minor((bp->b_dev));
	sctarg = sc_link->sd;

	opri = splbio();

	/*
	 * Use a bounce buffer if necessary
	 */
#ifdef BOUNCE_BUFFERS
	if (sc_link->flags & SDEV_BOUNCE)
		vm_bounce_alloc(bp);
#endif

	/*
	 * Place it at the end of the queue of activities for this device.
	 */
	bufq_insert_tail(&sctarg->buf_queue, bp);

	/*
	 * Tell the device to get going on the transfer if it's
	 * not doing anything, otherwise just wait for completion
	 * (All a bit silly if we're only allowing 1 open but..)
	 */
	sctargstart(unit, 0);

	splx(opri);
	return;
}

static sctarg_devsw_installed = 0;
#ifdef DEVFS
static void *sctarg_devfs_token;
#endif

static void 	sctarg_drvinit(void *unused)
{
	dev_t dev;

	if( ! sctarg_devsw_installed ) {
		dev = makedev(CDEV_MAJOR, 0);
		cdevsw_add(&dev,&sctarg_cdevsw, NULL);
		sctarg_devsw_installed = 1;
#ifdef DEVFS
		/* XXX should be in ADAPTER code */
		sctarg_devfs_token =
			devfs_add_devswf(&sctarg_cdevsw, 0, DV_CHR, 0,  0, 
					0600, "sctarg");
#endif
    	}
}

SYSINIT(sctargdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,sctarg_drvinit,NULL)