mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
Code Issues Releases Activity
b316c8b2a7
freebsd/sys/pc98/cbus/fdc.c
Satoshi Asami b316c8b2a7 s/pc98/isa/g in struct *_device and *_driver. Resync along the way. 
Submitted by:	The FreeBSD(98) Development Team
1996-08-31 15:07:42 +00:00

2450 lines
58 KiB
C
Raw Blame History

/*
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* Don Ahn.
*
* Copyright (c) 1993, 1994 by
* jc@irbs.UUCP (John Capo)
* vak@zebub.msk.su (Serge Vakulenko)
* ache@astral.msk.su (Andrew A. Chernov)
*
* Copyright (c) 1993, 1994, 1995 by
* joerg_wunsch@uriah.sax.de (Joerg Wunsch)
* dufault@hda.com (Peter Dufault)
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)fd.c 7.4 (Berkeley) 5/25/91
* $Id: fd.c,v 1.3 1996/07/30 18:55:58 asami Exp $
*
*/
#include "ft.h"
#if NFT < 1
#undef NFDC
#endif
#include "fd.h"
#if NFDC > 0
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/conf.h>
#include <sys/file.h>
#include <sys/ioctl.h>
#include <machine/clock.h>
#include <machine/ioctl_fd.h>
#include <sys/disklabel.h>
#include <sys/buf.h>
#include <sys/uio.h>
#include <sys/malloc.h>
#include <sys/proc.h>
#include <sys/syslog.h>
#include <sys/devconf.h>
#include <sys/dkstat.h>
#ifdef PC98
#include <pc98/pc98/pc98.h>
#include <pc98/pc98/pc98_device.h>
#include <pc98/pc98/fdreg.h>
#include <pc98/pc98/fdc.h>
#else
#include <i386/isa/isa.h>
#include <i386/isa/isa_device.h>
#include <i386/isa/fdreg.h>
#include <i386/isa/fdc.h>
#include <i386/isa/rtc.h>
#endif
#include <machine/stdarg.h>
#if NFT > 0
#include <sys/ftape.h>
#ifdef PC98
#include <pc98/pc98/ftreg.h>
#else
#include <i386/isa/ftreg.h>
#endif
#endif
#ifdef DEVFS
#include <sys/devfsext.h>
#endif
static int fd_goaway(struct kern_devconf *, int);
static int fdc_goaway(struct kern_devconf *, int);
static int fd_externalize(struct kern_devconf *, struct sysctl_req *);
/*
* Templates for the kern_devconf structures used when we attach.
*/
static struct kern_devconf kdc_fd[NFD] = { {
0, 0, 0, /* filled in by kern_devconf.c */
"fd", 0, { MDDT_DISK, 0 },
fd_externalize, 0, fd_goaway, DISK_EXTERNALLEN,
0, /* parent */
0, /* parentdata */
DC_UNCONFIGURED, /* state */
"floppy disk",
DC_CLS_DISK /* class */
} };
struct kern_devconf kdc_fdc[NFDC] = { {
0, 0, 0, /* filled in by kern_devconf.c */
#ifdef PC98
"fdc", 0, { MDDT_PC98, 0, "bio" },
pc98_generic_externalize, 0, fdc_goaway, PC98_EXTERNALLEN,
#else
"fdc", 0, { MDDT_ISA, 0, "bio" },
isa_generic_externalize, 0, fdc_goaway, ISA_EXTERNALLEN,
#endif
0, /* parent */
0, /* parentdata */
DC_UNCONFIGURED, /* state */
"floppy disk/tape controller",
DC_CLS_MISC /* class */
} };
static inline void
fd_registerdev(int ctlr, int unit)
{
if(unit != 0)
kdc_fd[unit] = kdc_fd[0];
kdc_fd[unit].kdc_unit = unit;
kdc_fd[unit].kdc_parent = &kdc_fdc[ctlr];
kdc_fd[unit].kdc_parentdata = 0;
dev_attach(&kdc_fd[unit]);
}
static inline void
fdc_registerdev(struct isa_device *dvp)
{
int unit = dvp->id_unit;
if(unit != 0)
kdc_fdc[unit] = kdc_fdc[0];
kdc_fdc[unit].kdc_unit = unit;
#ifdef PC98
kdc_fdc[unit].kdc_parent = &kdc_nec0;
#else
kdc_fdc[unit].kdc_parent = &kdc_isa0;
#endif
kdc_fdc[unit].kdc_parentdata = dvp;
dev_attach(&kdc_fdc[unit]);
}
static int
fdc_goaway(struct kern_devconf *kdc, int force)
{
if(force) {
dev_detach(kdc);
return 0;
} else {
return EBUSY; /* XXX fix */
}
}
static int
fd_goaway(struct kern_devconf *kdc, int force)
{
dev_detach(kdc);
return 0;
}
#define b_cylin b_resid /* XXX now spelled b_cylinder elsewhere */
/* misuse a flag to identify format operation */
#define B_FORMAT B_XXX
/*
* this biotab field doubles as a field for the physical unit number
* on the controller
*/
#define id_physid id_scsiid
/* error returns for fd_cmd() */
#define FD_FAILED -1
#define FD_NOT_VALID -2
#define FDC_ERRMAX 100 /* do not log more */
#ifdef PC98
#define NUMTYPES 5
#define NUMDENS NUMTYPES
#else
#define NUMTYPES 14
#define NUMDENS (NUMTYPES - 6)
#endif
/* These defines (-1) must match index for fd_types */
#define F_TAPE_TYPE 0x020 /* bit for fd_types to indicate tape */
#define NO_TYPE 0 /* must match NO_TYPE in ft.c */
#ifdef PC98
#define FDT_NONE 0 /* none present */
#define FDT_12M 1 /* 1M/640K FDD */
#define FDT_144M 2 /* 1.44M/1M/640K FDD */
#define FD_1200 1
#define FD_1232 2
#define FD_720 3
#define FD_640 4
#define FD_1440 5
#else
#define FD_1720 1
#define FD_1480 2
#define FD_1440 3
#define FD_1200 4
#define FD_820 5
#define FD_800 6
#define FD_720 7
#define FD_360 8
#define FD_1480in5_25 9
#define FD_1440in5_25 10
#define FD_820in5_25 11
#define FD_800in5_25 12
#define FD_720in5_25 13
#define FD_360in5_25 14
#endif
static struct fd_type fd_types[NUMTYPES] =
{
#ifdef PC98
{ 15,2,0xFF,0x1B,80,2400,1,0,2,0x54,1 }, /* 1.2 meg HD floppy */
{ 8,3,0xFF,0x35,77,1232,1,0,2,0x74,1 }, /* 1.2 meg HD floppy 1024/sec */
{ 9,2,0xFF,0x20,80,1440,1,1,2,0x50,1 }, /* 720k floppy in 1.2meg drive */
{ 8,2,0xFF,0x2A,80,1280,1,1,2,0x50,1 }, /* 640k floppy in 1.2meg drive */
{ 18,2,0xFF,0x1B,80,2880,1,2,2,0x54,1 }, /* 1.44 meg HD 3.5in floppy */
#else
{ 21,2,0xFF,0x04,82,3444,1,FDC_500KBPS,2,0x0C,2 }, /* 1.72M in HD 3.5in */
{ 18,2,0xFF,0x1B,82,2952,1,FDC_500KBPS,2,0x6C,1 }, /* 1.48M in HD 3.5in */
{ 18,2,0xFF,0x1B,80,2880,1,FDC_500KBPS,2,0x6C,1 }, /* 1.44M in HD 3.5in */
{ 15,2,0xFF,0x1B,80,2400,1,FDC_500KBPS,2,0x54,1 }, /* 1.2M in HD 5.25/3.5 */
{ 10,2,0xFF,0x10,82,1640,1,FDC_250KBPS,2,0x2E,1 }, /* 820K in HD 3.5in */
{ 10,2,0xFF,0x10,80,1600,1,FDC_250KBPS,2,0x2E,1 }, /* 800K in HD 3.5in */
{ 9,2,0xFF,0x20,80,1440,1,FDC_250KBPS,2,0x50,1 }, /* 720K in HD 3.5in */
{ 9,2,0xFF,0x2A,40, 720,1,FDC_250KBPS,2,0x50,1 }, /* 360K in DD 5.25in */
{ 18,2,0xFF,0x02,82,2952,1,FDC_500KBPS,2,0x02,2 }, /* 1.48M in HD 5.25in */
{ 18,2,0xFF,0x02,80,2880,1,FDC_500KBPS,2,0x02,2 }, /* 1.44M in HD 5.25in */
{ 10,2,0xFF,0x10,82,1640,1,FDC_300KBPS,2,0x2E,1 }, /* 820K in HD 5.25in */
{ 10,2,0xFF,0x10,80,1600,1,FDC_300KBPS,2,0x2E,1 }, /* 800K in HD 5.25in */
{ 9,2,0xFF,0x20,80,1440,1,FDC_300KBPS,2,0x50,1 }, /* 720K in HD 5.25in */
{ 9,2,0xFF,0x23,40, 720,2,FDC_300KBPS,2,0x50,1 }, /* 360K in HD 5.25in */
#endif
};
#ifdef PC98
#define DRVS_PER_CTLR 4 /* 4 floppies */
#else
#define DRVS_PER_CTLR 2 /* 2 floppies */
#endif
/***********************************************************************\
* Per controller structure. *
\***********************************************************************/
struct fdc_data fdc_data[NFDC];
/***********************************************************************\
* Per drive structure. *
* N per controller (DRVS_PER_CTLR) *
\***********************************************************************/
static struct fd_data {
struct fdc_data *fdc; /* pointer to controller structure */
int fdsu; /* this units number on this controller */
int type; /* Drive type (FD_1440...) */
struct fd_type *ft; /* pointer to the type descriptor */
int flags;
#define FD_OPEN 0x01 /* it's open */
#define FD_ACTIVE 0x02 /* it's active */
#define FD_MOTOR 0x04 /* motor should be on */
#define FD_MOTOR_WAIT 0x08 /* motor coming up */
int skip;
int hddrv;
#define FD_NO_TRACK -2
int track; /* where we think the head is */
int options; /* user configurable options, see ioctl_fd.h */
int dkunit; /* disk stats unit number */
#ifdef DEVFS
void *bdevs[1 + NUMDENS + MAXPARTITIONS];
void *cdevs[1 + NUMDENS + MAXPARTITIONS];
#endif
#ifdef PC98
int pc98_trans;
#endif
} fd_data[NFD];
#ifdef EPSON_NRDISK
typedef unsigned int nrd_t;
#define P_NRD_ADDRH 0xc24
#define P_NRD_ADDRM 0xc22
#define P_NRD_ADDRL 0xc20
#define P_NRD_CHECK 0xc20
#define P_NRD_DATA 0xc26
#define P_NRD_LED 0xc36
#define B_NRD_CHK 0x80
#define B_NRD_LED 0x40
#define A_NRD_INFO 0x2
#define A_NRD_BASE 0x400
#define NRD_STATUS 0x0
#define NRD_ST0_HD 0x04
static fdu_t nrdu=-1;
static int nrdsec=0;
static nrd_t nrdblkn=0;
static nrd_t nrdaddr=0x0;
#define nrd_check_ready() ({ \
(epson_inb(P_NRD_CHECK) & B_NRD_CHK) ? 0 : 1; \
})
#define nrd_LED_on() epson_outb(P_NRD_LED, B_NRD_LED)
#define nrd_LED_off() epson_outb(P_NRD_LED, ~B_NRD_LED)
#define nrd_trac() ((int)(nrd_info(nrdaddr) & 0xff))
#define nrd_head() ((int)((nrd_info(nrdaddr) >> 8) & 0xff))
#define nrd_sec() ((int)(nrd_info(nrdaddr + 2) & 0xff))
#define nrd_secsize() ((int)((nrd_info(A_NRD_INFO) >> 8) & 0xff))
#define nrd_addrset(p) nrd_addr((nrd_t)((nrd_t)p+A_NRD_BASE))
static inline void
nrd_addr(addr)
nrd_t addr;
{
epson_outb(P_NRD_ADDRH, (u_char)((addr >> 16) & 0x1f));
epson_outb(P_NRD_ADDRM, (u_char)((addr >> 8) & 0xff));
epson_outb(P_NRD_ADDRL, (u_char)(addr & 0xff));
}
static inline u_short
nrd_info(addr)
nrd_t addr;
{
u_short tmp;
nrd_addr(addr);
outb(0x43f, 0x42);
tmp = (short)inw(P_NRD_DATA);
outb(0x43f, 0x40);
return ((u_short)tmp);
}
#endif /* EPSON_NRDISK */
/***********************************************************************\
* Throughout this file the following conventions will be used: *
* fd is a pointer to the fd_data struct for the drive in question *
* fdc is a pointer to the fdc_data struct for the controller *
* fdu is the floppy drive unit number *
* fdcu is the floppy controller unit number *
* fdsu is the floppy drive unit number on that controller. (sub-unit) *
\***********************************************************************/
#if NFT > 0
int ftopen(dev_t, int);
int ftintr(ftu_t ftu);
int ftclose(dev_t, int);
void ftstrategy(struct buf *);
int ftioctl(dev_t, int, caddr_t, int, struct proc *);
int ftdump(dev_t);
int ftsize(dev_t);
int ftattach(struct isa_device *, struct isa_device *, int);
#endif
/* autoconfig functions */
static int fdprobe(struct isa_device *);
static int fdattach(struct isa_device *);
/* needed for ft driver, thus exported */
int in_fdc(fdcu_t);
int out_fdc(fdcu_t, int);
/* internal functions */
static void set_motor(fdcu_t, int, int);
# define TURNON 1
# define TURNOFF 0
static timeout_t fd_turnoff;
static timeout_t fd_motor_on;
static void fd_turnon(fdu_t);
static void fdc_reset(fdc_p);
static int fd_in(fdcu_t, int *);
static void fdstart(fdcu_t);
static timeout_t fd_timeout;
static timeout_t fd_pseudointr;
static int fdstate(fdcu_t, fdc_p);
static int retrier(fdcu_t);
static int fdformat(dev_t, struct fd_formb *, struct proc *);
#define DEVIDLE 0
#define FINDWORK 1
#define DOSEEK 2
#define SEEKCOMPLETE 3
#define IOCOMPLETE 4
#define RECALCOMPLETE 5
#define STARTRECAL 6
#define RESETCTLR 7
#define SEEKWAIT 8
#define RECALWAIT 9
#define MOTORWAIT 10
#define IOTIMEDOUT 11
#ifdef DEBUG
static char const * const fdstates[] =
{
"DEVIDLE",
"FINDWORK",
"DOSEEK",
"SEEKCOMPLETE",
"IOCOMPLETE",
"RECALCOMPLETE",
"STARTRECAL",
"RESETCTLR",
"SEEKWAIT",
"RECALWAIT",
"MOTORWAIT",
"IOTIMEDOUT"
};
/* CAUTION: fd_debug causes huge amounts of logging output */
static int volatile fd_debug = 0;
#define TRACE0(arg) if(fd_debug) printf(arg)
#define TRACE1(arg1, arg2) if(fd_debug) printf(arg1, arg2)
#else /* DEBUG */
#define TRACE0(arg)
#define TRACE1(arg1, arg2)
#endif /* DEBUG */
/* autoconfig structure */
struct isa_driver fdcdriver = {
fdprobe, fdattach, "fdc",
};
static d_open_t Fdopen; /* NOTE, not fdopen */
static d_close_t fdclose;
static d_ioctl_t fdioctl;
static d_strategy_t fdstrategy;
#define CDEV_MAJOR 9
#define BDEV_MAJOR 2
static struct cdevsw fd_cdevsw;
static struct bdevsw fd_bdevsw =
{ Fdopen, fdclose, fdstrategy, fdioctl, /*2*/
nodump, nopsize, 0, "fd", &fd_cdevsw, -1 };
static struct isa_device *fdcdevs[NFDC];
/*
* Provide hw.devconf information.
*/
static int
fd_externalize(struct kern_devconf *kdc, struct sysctl_req *req)
{
return disk_externalize(fd_data[kdc->kdc_unit].fdsu, req);
}
static int
fdc_err(fdcu_t fdcu, const char *s)
{
fdc_data[fdcu].fdc_errs++;
if(s) {
if(fdc_data[fdcu].fdc_errs < FDC_ERRMAX)
printf("fdc%d: %s", fdcu, s);
else if(fdc_data[fdcu].fdc_errs == FDC_ERRMAX)
printf("fdc%d: too many errors, not logging any more\n",
fdcu);
}
return FD_FAILED;
}
/*
* fd_cmd: Send a command to the chip. Takes a varargs with this structure:
* Unit number,
* # of output bytes, output bytes as ints ...,
* # of input bytes, input bytes as ints ...
*/
static int
fd_cmd(fdcu_t fdcu, int n_out, ...)
{
u_char cmd;
int n_in;
int n;
va_list ap;
va_start(ap, n_out);
cmd = (u_char)(va_arg(ap, int));
va_end(ap);
va_start(ap, n_out);
for (n = 0; n < n_out; n++)
{
if (out_fdc(fdcu, va_arg(ap, int)) < 0)
{
char msg[50];
sprintf(msg,
"cmd %x failed at out byte %d of %d\n",
cmd, n + 1, n_out);
return fdc_err(fdcu, msg);
}
}
n_in = va_arg(ap, int);
for (n = 0; n < n_in; n++)
{
int *ptr = va_arg(ap, int *);
if (fd_in(fdcu, ptr) < 0)
{
char msg[50];
sprintf(msg,
"cmd %02x failed at in byte %d of %d\n",
cmd, n + 1, n_in);
return fdc_err(fdcu, msg);
}
}
return 0;
}
static int
fd_sense_drive_status(fdc_p fdc, int *st3p)
{
int st3;
if (fd_cmd(fdc->fdcu, 2, NE7CMD_SENSED, fdc->fdu, 1, &st3))
{
return fdc_err(fdc->fdcu, "Sense Drive Status failed\n");
}
if (st3p)
*st3p = st3;
return 0;
}
static int
fd_sense_int(fdc_p fdc, int *st0p, int *cylp)
{
int st0, cyl;
#ifdef EPSON_NRDISK
if (fdc->fdu == nrdu) {
if (fdc->fd->track >= 0) nrdaddr = (fdc->fd->track + 1) * 8;
else nrdaddr = 0x0;
*st0p = nrd_head() ? NRD_ST0_HD : NRD_STATUS;
*cylp = nrd_trac();
}
else {
#endif /* EPSON_NRDISK */
int ret = fd_cmd(fdc->fdcu, 1, NE7CMD_SENSEI, 1, &st0);
if (ret)
{
(void)fdc_err(fdc->fdcu,
"sense intr err reading stat reg 0\n");
return ret;
}
if (st0p)
*st0p = st0;
if ((st0 & NE7_ST0_IC) == NE7_ST0_IC_IV)
{
/*
* There doesn't seem to have been an interrupt.
*/
return FD_NOT_VALID;
}
if (fd_in(fdc->fdcu, &cyl) < 0)
{
return fdc_err(fdc->fdcu, "can't get cyl num\n");
}
if (cylp)
*cylp = cyl;
#ifdef EPSON_NRDISK
}
#endif /* EPSON_NRDISK */
return 0;
}
static int
fd_read_status(fdc_p fdc, int fdsu)
{
int i, ret;
for (i = 0; i < 7; i++)
{
/*
* XXX types are poorly chosen. Only bytes can by read
* from the hardware, but fdc_status wants u_longs and
* fd_in() gives ints.
*/
int status;
#ifdef EPSON_NRDISK
if (fdc->fdu == nrdu) {
switch (i) {
case 0: fdc->status[i] = nrd_head()
? NRD_ST0_HD : NRD_STATUS; break;
case 1: fdc->status[i] = NRD_STATUS; break;
case 2: fdc->status[i] = NRD_STATUS; break;
case 3: fdc->status[i] = nrd_trac(); break;
case 4: fdc->status[i] = nrd_head(); break;
case 5: fdc->status[i] = nrdsec; break;
case 6: fdc->status[i] = nrd_secsize(); break;
}
ret = 0;
}
else {
#endif /* EPSON_NRDISK */
ret = fd_in(fdc->fdcu, &status);
fdc->status[i] = status;
if (ret != 0)
break;
#ifdef EPSON_NRDISK
}
#endif /* EPSON_NRDISK */
}
if (ret == 0)
fdc->flags |= FDC_STAT_VALID;
else
fdc->flags &= ~FDC_STAT_VALID;
return ret;
}
/****************************************************************************/
/* autoconfiguration stuff */
/****************************************************************************/
#ifdef PC98
static int pc98_trans = 0; /* 0 : HD , 1 : DD , 2 : 1.44 */
static int pc98_trans_prev = 0;
static void set_density(fdcu_t, fdu_t);
static int pc98_fd_check_ready(fdu_t);
static void set_density(fdcu, fdu)
fdcu_t fdcu;
fdu_t fdu;
{
/* always motor on */
outb(IO_FDPORT,
(pc98_trans != 1 ? FDP_FDDEXC : 0) | FDP_PORTEXC);
DELAY(100);
outb(fdc_data[fdcu].baseport + FDOUT, FDO_RST | FDO_DMAE);
/* in the case of note W, always inhibit 100ms timer */
}
static int pc98_fd_check_ready(fdu)
fdu_t fdu;
{
fd_p fd = fd_data + fdu;
fdcu_t fdcu = fd->fdc->fdcu;
int retry = 0;
#ifdef EPSON_NRDISK
if (fdu == nrdu) {
if (nrd_check_ready()) return 0;
else return -1;
}
#endif
while (retry++ < 30000) {
set_motor(fdcu, fd->fdsu, TURNON);
out_fdc(fdcu, NE7CMD_SENSED); /* Sense Drive Status */
DELAY(100);
out_fdc(fdcu, fdu); /* Drive number */
DELAY(100);
if ((in_fdc(fdcu) & NE7_ST3_RD)){
outb(fdc_data[fdcu].baseport + FDOUT,
FDO_DMAE | FDO_MTON);
DELAY(10);
return 0;
}
}
return -1;
}
#endif
/*
* probe for existance of controller
*/
static int
fdprobe(struct isa_device *dev)
{
fdcu_t fdcu = dev->id_unit;
if(fdc_data[fdcu].flags & FDC_ATTACHED)
{
printf("fdc%d: unit used multiple times\n", fdcu);
return 0;
}
fdcdevs[fdcu] = dev;
fdc_data[fdcu].baseport = dev->id_iobase;
#ifndef DEV_LKM
fdc_registerdev(dev);
#endif
#ifndef PC98
/* First - lets reset the floppy controller */
outb(dev->id_iobase+FDOUT, 0);
DELAY(100);
outb(dev->id_iobase+FDOUT, FDO_FRST);
#endif
/* see if it can handle a command */
#ifdef PC98
if (fd_cmd(fdcu,
3, NE7CMD_SPECIFY, NE7_SPEC_1(4, 240), NE7_SPEC_2(2, 0),
0))
#else
if (fd_cmd(fdcu,
3, NE7CMD_SPECIFY, NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
0))
#endif
{
return(0);
}
kdc_fdc[fdcu].kdc_state = DC_IDLE;
return (IO_FDCSIZE);
}
/*
* wire controller into system, look for floppy units
*/
static int
fdattach(struct isa_device *dev)
{
unsigned fdt;
fdu_t fdu;
fdcu_t fdcu = dev->id_unit;
fdc_p fdc = fdc_data + fdcu;
fd_p fd;
int fdsu, st0, st3, i;
#if NFT > 0
int unithasfd;
#endif
struct isa_device *fdup;
int ic_type = 0;
#ifdef DEVFS
int mynor;
int typemynor;
int typesize;
#endif
fdc->fdcu = fdcu;
fdc->flags |= FDC_ATTACHED;
#ifdef PC98
fdc->dmachan = 2;
if (fdc->dmachan != dev->id_drq) {
dev->id_drq = fdc->dmachan;
printf(" [dma is changed to #%d]", fdc->dmachan);
}
/* Acquire the DMA channel forever, The driver will do the rest */
pc98_dma_acquire(fdc->dmachan);
pc98_dmainit(fdc->dmachan, 128 << 3 /* XXX max secsize */);
fdc->state = DEVIDLE;
fdc_reset(fdc);
#else
fdc->dmachan = dev->id_drq;
/* Acquire the DMA channel forever, The driver will do the rest */
isa_dma_acquire(fdc->dmachan);
isa_dmainit(fdc->dmachan, 128 << 3 /* XXX max secsize */);
fdc->state = DEVIDLE;
/* reset controller, turn motor off, clear fdout mirror reg */
outb(fdc->baseport + FDOUT, ((fdc->fdout = 0)));
#endif
TAILQ_INIT(&fdc->head);
/* check for each floppy drive */
#ifdef PC98
for (fdup = pc98_biotab_fdc; fdup->id_driver != 0; fdup++) {
#else
for (fdup = isa_biotab_fdc; fdup->id_driver != 0; fdup++) {
#endif
if (fdup->id_iobase != dev->id_iobase)
continue;
fdu = fdup->id_unit;
fd = &fd_data[fdu];
if (fdu >= (NFD+NFT))
continue;
fdsu = fdup->id_physid;
/* look up what bios thinks we have */
switch (fdu) {
#ifdef PC98
case 0: case 1: case 2: case 3:
if ((PC98_SYSTEM_PARAMETER(0x5ae) >> fdu) & 0x01)
fdt = FDT_144M;
#ifdef EPSON_NRDISK
else if ((PC98_SYSTEM_PARAMETER(0x55c) >> fdu) & 0x01) {
fdt = FDT_12M;
switch (epson_machine_id) {
case 0x20: case 0x27:
if ((PC98_SYSTEM_PARAMETER(0x488) >> fdu) & 0x01) {
if (nrd_check_ready()) {
nrd_LED_on();
nrdu = fdu;
}
else fdt = FDT_NONE;
}
}
}
#else /* !EPSON_NRDISK */
else if ((PC98_SYSTEM_PARAMETER(0x55c) >> fdu) & 0x01) {
fdt = FDT_12M;
switch (epson_machine_id) {
case 0x20: case 0x27:
if ((PC98_SYSTEM_PARAMETER(0x488) >> fdu) & 0x01)
fdt = FDT_NONE;
}
}
#endif /* EPSON_NRDISK */
else fdt = FDT_NONE;
break;
default:
fdt = FDT_NONE;
break;
#else
case 0: fdt = (rtcin(RTC_FDISKETTE) & 0xf0);
break;
case 1: fdt = ((rtcin(RTC_FDISKETTE) << 4) & 0xf0);
break;
default: fdt = RTCFDT_NONE;
break;
#endif
}
/* is there a unit? */
#ifdef PC98
if ((fdt == FDT_NONE)
#else
if ((fdt == RTCFDT_NONE)
#endif
#if NFT > 0
|| (fdsu >= DRVS_PER_CTLR)) {
#else
) {
#ifdef PC98
fd->fdc = fdc;
#endif
fd->type = NO_TYPE;
#endif
#if NFT > 0
/* If BIOS says no floppy, or > 2nd device */
/* Probe for and attach a floppy tape. */
/* Tell FT if there was already a disk */
/* with this unit number found. */
unithasfd = 0;
if (fdu < NFD && fd->type != NO_TYPE)
unithasfd = 1;
if (ftattach(dev, fdup, unithasfd))
continue;
if (fdsu < DRVS_PER_CTLR)
fd->type = NO_TYPE;
#endif
continue;
}
#ifdef PC98
kdc_fdc[fdcu].kdc_description =
"NEC 765 floppy disk/tape controller";
#else
/* select it */
set_motor(fdcu, fdsu, TURNON);
DELAY(1000000); /* 1 sec */
if (ic_type == 0 &&
fd_cmd(fdcu, 1, NE7CMD_VERSION, 1, &ic_type) == 0)
{
printf("fdc%d: ", fdcu);
ic_type = (u_char)ic_type;
switch( ic_type ) {
case 0x80:
printf("NEC 765\n");
fdc->fdct = FDC_NE765;
kdc_fdc[fdcu].kdc_description =
"NEC 765 floppy disk/tape controller";
break;
case 0x81:
printf("Intel 82077\n");
fdc->fdct = FDC_I82077;
kdc_fdc[fdcu].kdc_description =
"Intel 82077 floppy disk/tape controller";
break;
case 0x90:
printf("NEC 72065B\n");
fdc->fdct = FDC_NE72065;
kdc_fdc[fdcu].kdc_description =
"NEC 72065B floppy disk/tape controller";
break;
default:
printf("unknown IC type %02x\n", ic_type);
fdc->fdct = FDC_UNKNOWN;
break;
}
}
if ((fd_cmd(fdcu, 2, NE7CMD_SENSED, fdsu, 1, &st3) == 0) &&
(st3 & NE7_ST3_T0)) {
/* if at track 0, first seek inwards */
/* seek some steps: */
(void)fd_cmd(fdcu, 3, NE7CMD_SEEK, fdsu, 10, 0);
DELAY(300000); /* ...wait a moment... */
(void)fd_sense_int(fdc, 0, 0); /* make ctrlr happy */
}
/* If we're at track 0 first seek inwards. */
if ((fd_sense_drive_status(fdc, &st3) == 0) &&
(st3 & NE7_ST3_T0)) {
/* Seek some steps... */
if (fd_cmd(fdcu, 3, NE7CMD_SEEK, fdsu, 10, 0) == 0) {
/* ...wait a moment... */
DELAY(300000);
/* make ctrlr happy: */
(void)fd_sense_int(fdc, 0, 0);
}
}
for(i = 0; i < 2; i++) {
/*
* we must recalibrate twice, just in case the
* heads have been beyond cylinder 76, since most
* FDCs still barf when attempting to recalibrate
* more than 77 steps
*/
/* go back to 0: */
if (fd_cmd(fdcu, 2, NE7CMD_RECAL, fdsu, 0) == 0) {
/* a second being enough for full stroke seek*/
DELAY(i == 0? 1000000: 300000);
/* anything responding? */
if (fd_sense_int(fdc, &st0, 0) == 0 &&
(st0 & NE7_ST0_EC) == 0)
break; /* already probed succesfully */
}
}
set_motor(fdcu, fdsu, TURNOFF);
if (st0 & NE7_ST0_EC) /* no track 0 -> no drive present */
continue;
#endif
fd->track = FD_NO_TRACK;
fd->fdc = fdc;
fd->fdsu = fdsu;
fd->options = 0;
printf("fd%d: ", fdu);
fd_registerdev(fdcu, fdu);
switch (fdt) {
#ifdef PC98
case FDT_12M:
#ifdef EPSON_NRDISK
if (fdu == nrdu) {
printf("EPSON RAM DRIVE\n");
nrd_LED_off();
}
else printf("1M/640M FDD\n");
#else /* !EPSON_NRDISK */
printf("1M/640K FDD\n");
#endif /* EPSON_NRDISK */
fd->type = FD_1200;
fd->pc98_trans = 0;
kdc_fd[fdu].kdc_description =
"1M/640K floppy disk drive";
#ifdef DEVFS
sprintf(name,"rfd%d.1200",fdu);
#endif /* DEVFS */
break;
case FDT_144M:
printf("1.44M FDD\n");
fd->type = FD_1200;
fd->pc98_trans = 0;
outb(0x4be, (fdu << 5) | 0x10);
kdc_fd[fdu].kdc_description =
"1.44MB (1440K) 3.5in floppy disk drive";
#ifdef DEVFS
sprintf(name,"rfd%d.1440",fdu);
#endif /* DEVFS */
break;
#else
case RTCFDT_12M:
printf("1.2MB 5.25in\n");
fd->type = FD_1200;
kdc_fd[fdu].kdc_description =
"1.2MB (1200K) 5.25in floppy disk drive";
break;
case RTCFDT_144M:
printf("1.44MB 3.5in\n");
fd->type = FD_1440;
kdc_fd[fdu].kdc_description =
"1.44MB (1440K) 3.5in floppy disk drive";
break;
case RTCFDT_288M:
case RTCFDT_288M_1:
printf("2.88MB 3.5in - 1.44MB mode\n");
fd->type = FD_1440;
kdc_fd[fdu].kdc_description =
"2.88MB (2880K) 3.5in floppy disk drive in 1.44 mode";
break;
case RTCFDT_360K:
printf("360KB 5.25in\n");
fd->type = FD_360;
kdc_fd[fdu].kdc_description =
"360KB 5.25in floppy disk drive";
break;
case RTCFDT_720K:
printf("720KB 3.5in\n");
fd->type = FD_720;
kdc_fd[fdu].kdc_description =
"720KB 3.5in floppy disk drive";
break;
#endif
default:
printf("unknown\n");
fd->type = NO_TYPE;
dev_detach(&kdc_fd[fdu]);
continue;
}
kdc_fd[fdu].kdc_state = DC_IDLE;
#ifdef DEVFS
mynor = fdu << 6;
fd->bdevs[0] = devfs_add_devswf(&fd_bdevsw, mynor, DV_BLK,
UID_ROOT, GID_OPERATOR, 0640,
"fd%d", fdu);
fd->cdevs[0] = devfs_add_devswf(&fd_cdevsw, mynor, DV_CHR,
UID_ROOT, GID_OPERATOR, 0640,
"rfd%d", fdu);
for (i = 1; i < 1 + NUMDENS; i++) {
/*
* XXX this and the lookup in Fdopen() should be
* data driven.
*/
switch (fd->type) {
case FD_360:
if (i != FD_360)
continue;
break;
case FD_720:
if (i != FD_720 && i != FD_800 && i != FD_820)
continue;
break;
case FD_1200:
if (i != FD_360 && i != FD_720 && i != FD_800
&& i != FD_820 && i != FD_1200
&& i != FD_1440 && i != FD_1480)
continue;
break;
case FD_1440:
if (i != FD_720 && i != FD_800 && i != FD_820
&& i != FD_1200 && i != FD_1440
&& i != FD_1480 && i != FD_1720)
continue;
break;
}
typemynor = mynor | i;
typesize = fd_types[i - 1].size / 2;
/*
* XXX all these conversions give bloated code and
* confusing names.
*/
if (typesize == 1476)
typesize = 1480;
if (typesize == 1722)
typesize = 1720;
fd->bdevs[i] =
devfs_add_devswf(&fd_bdevsw, typemynor, DV_BLK,
UID_ROOT, GID_OPERATOR, 0640,
"fd%d.%d", fdu, typesize);
fd->cdevs[i] =
devfs_add_devswf(&fd_cdevsw, typemynor, DV_CHR,
UID_ROOT, GID_OPERATOR, 0640,
"rfd%d.%d", fdu, typesize);
}
for (i = 0; i < MAXPARTITIONS; i++) {
fd->bdevs[1 + NUMDENS + i] =
devfs_link(fd->bdevs[0],
"fd%d%c", fdu, 'a' + i);
fd->cdevs[1 + NUMDENS + i] =
devfs_link(fd->cdevs[0],
"rfd%d%c", fdu, 'a' + i);
}
#endif /* DEVFS */
if (dk_ndrive < DK_NDRIVE) {
sprintf(dk_names[dk_ndrive], "fd%d", fdu);
fd->dkunit = dk_ndrive++;
/*
* XXX assume rate is FDC_500KBPS.
*/
dk_wpms[dk_ndrive] = 500000 / 8 / 2;
} else {
fd->dkunit = -1;
}
}
return (1);
}
/****************************************************************************/
/* motor control stuff */
/* remember to not deselect the drive we're working on */
/****************************************************************************/
static void
set_motor(fdcu_t fdcu, int fdsu, int turnon)
{
int fdout = fdc_data[fdcu].fdout;
int needspecify = 0;
#ifdef PC98
outb(IO_FDPORT, (pc98_trans != 1 ? FDP_FDDEXC : 0)|FDP_PORTEXC);
DELAY(10);
fdout = FDO_DMAE|FDO_MTON;
#else
if(turnon) {
fdout &= ~FDO_FDSEL;
fdout |= (FDO_MOEN0 << fdsu) + fdsu;
} else
fdout &= ~(FDO_MOEN0 << fdsu);
if(!turnon
&& (fdout & (FDO_MOEN0+FDO_MOEN1+FDO_MOEN2+FDO_MOEN3)) == 0)
/* gonna turn off the last drive, put FDC to bed */
fdout &= ~ (FDO_FRST|FDO_FDMAEN);
else {
/* make sure controller is selected and specified */
if((fdout & (FDO_FRST|FDO_FDMAEN)) == 0)
needspecify = 1;
fdout |= (FDO_FRST|FDO_FDMAEN);
}
#endif
outb(fdc_data[fdcu].baseport+FDOUT, fdout);
DELAY(10);
fdc_data[fdcu].fdout = fdout;
#ifndef PC98
kdc_fdc[fdcu].kdc_state = (fdout & FDO_FRST)? DC_BUSY: DC_IDLE;
#endif
TRACE1("[0x%x->FDOUT]", fdout);
if(needspecify) {
/*
* XXX
* special case: since we have just woken up the FDC
* from its sleep, we silently assume the command will
* be accepted, and do not test for a timeout
*/
#ifdef PC98
(void)fd_cmd(fdcu, 3, NE7CMD_SPECIFY,
NE7_SPEC_1(4, 240), NE7_SPEC_2(2, 0),
0);
#else
(void)fd_cmd(fdcu, 3, NE7CMD_SPECIFY,
NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
0);
#endif
}
}
static void
fd_turnoff(void *arg1)
{
fdu_t fdu = (fdu_t)arg1;
int s;
fd_p fd = fd_data + fdu;
TRACE1("[fd%d: turnoff]", fdu);
/*
* Don't turn off the motor yet if the drive is active.
* XXX shouldn't even schedule turnoff until drive is inactive
* and nothing is queued on it.
*/
if (fd->fdc->state != DEVIDLE && fd->fdc->fdu == fdu) {
timeout(fd_turnoff, arg1, 4 * hz);
return;
}
s = splbio();
fd->flags &= ~FD_MOTOR;
set_motor(fd->fdc->fdcu, fd->fdsu, TURNOFF);
splx(s);
}
static void
fd_motor_on(void *arg1)
{
fdu_t fdu = (fdu_t)arg1;
int s;
fd_p fd = fd_data + fdu;
s = splbio();
fd->flags &= ~FD_MOTOR_WAIT;
if((fd->fdc->fd == fd) && (fd->fdc->state == MOTORWAIT))
{
fdintr(fd->fdc->fdcu);
}
splx(s);
}
static void
fd_turnon(fdu_t fdu)
{
fd_p fd = fd_data + fdu;
if(!(fd->flags & FD_MOTOR))
{
fd->flags |= (FD_MOTOR + FD_MOTOR_WAIT);
set_motor(fd->fdc->fdcu, fd->fdsu, TURNON);
timeout(fd_motor_on, (caddr_t)fdu, hz); /* in 1 sec its ok */
}
}
static void
fdc_reset(fdc_p fdc)
{
fdcu_t fdcu = fdc->fdcu;
/* Try a reset, keep motor on */
#ifdef PC98
set_density(fdcu, 0);
if (pc98_machine_type & M_EPSON_PC98)
outb(fdc->baseport + FDOUT, 0xe8);
else
outb(fdc->baseport + FDOUT, 0xd8);
DELAY(200);
outb(fdc->baseport + FDOUT, 0x18);
DELAY(10);
#else
outb(fdc->baseport + FDOUT, fdc->fdout & ~(FDO_FRST|FDO_FDMAEN));
TRACE1("[0x%x->FDOUT]", fdc->fdout & ~(FDO_FRST|FDO_FDMAEN));
DELAY(100);
/* enable FDC, but defer interrupts a moment */
outb(fdc->baseport + FDOUT, fdc->fdout & ~FDO_FDMAEN);
TRACE1("[0x%x->FDOUT]", fdc->fdout & ~FDO_FDMAEN);
DELAY(100);
outb(fdc->baseport + FDOUT, fdc->fdout);
TRACE1("[0x%x->FDOUT]", fdc->fdout);
#endif
/* XXX after a reset, silently believe the FDC will accept commands */
#ifdef PC98
(void)fd_cmd(fdcu, 3, NE7CMD_SPECIFY,
NE7_SPEC_1(4, 240), NE7_SPEC_2(2, 0),
0);
#else
(void)fd_cmd(fdcu, 3, NE7CMD_SPECIFY,
NE7_SPEC_1(3, 240), NE7_SPEC_2(2, 0),
0);
#endif
}
/****************************************************************************/
/* fdc in/out */
/****************************************************************************/
int
in_fdc(fdcu_t fdcu)
{
int baseport = fdc_data[fdcu].baseport;
int i, j = 1000000;
while ((i = inb(baseport+FDSTS) & (NE7_DIO|NE7_RQM))
!= (NE7_DIO|NE7_RQM) && j-- > 0) {
if (i == NE7_RQM)
return fdc_err(fdcu, "ready for output in input\n");
}
if (j <= 0)
return fdc_err(fdcu, bootverbose? "input ready timeout\n": 0);
#ifdef DEBUG
i = inb(baseport+FDDATA);
TRACE1("[FDDATA->0x%x]", (unsigned char)i);
return(i);
#else
return inb(baseport+FDDATA);
#endif
}
/*
* fd_in: Like in_fdc, but allows you to see if it worked.
*/
static int
fd_in(fdcu_t fdcu, int *ptr)
{
int baseport = fdc_data[fdcu].baseport;
int i, j = 1000000;
while ((i = inb(baseport+FDSTS) & (NE7_DIO|NE7_RQM))
!= (NE7_DIO|NE7_RQM) && j-- > 0) {
DELAY(10);
if (i == NE7_RQM)
return fdc_err(fdcu, "ready for output in input\n");
}
if (j <= 0)
return fdc_err(fdcu, bootverbose? "input ready timeout\n": 0);
#ifdef DEBUG
i = inb(baseport+FDDATA);
TRACE1("[FDDATA->0x%x]", (unsigned char)i);
*ptr = i;
return 0;
#else
i = inb(baseport+FDDATA);
if (ptr)
*ptr = i;
return 0;
#endif
}
int
out_fdc(fdcu_t fdcu, int x)
{
int baseport = fdc_data[fdcu].baseport;
int i;
/* Check that the direction bit is set */
i = 1000000;
while ((inb(baseport+FDSTS) & NE7_DIO) && i-- > 0)
DELAY(10);
if (i <= 0) return fdc_err(fdcu, "direction bit not set\n");
/* Check that the floppy controller is ready for a command */
i = 1000000;
while ((inb(baseport+FDSTS) & NE7_RQM) == 0 && i-- > 0)
DELAY(10);
if (i <= 0)
return fdc_err(fdcu, bootverbose? "output ready timeout\n": 0);
/* Send the command and return */
outb(baseport+FDDATA, x);
DELAY(10);
TRACE1("[0x%x->FDDATA]", x);
return (0);
}
/****************************************************************************/
/* fdopen/fdclose */
/****************************************************************************/
int
Fdopen(dev_t dev, int flags, int mode, struct proc *p)
{
fdu_t fdu = FDUNIT(minor(dev));
int type = FDTYPE(minor(dev));
fdc_p fdc;
#if NFT > 0
/* check for a tape open */
if (type & F_TAPE_TYPE)
return(ftopen(dev, flags));
#endif
/* check bounds */
if (fdu >= NFD)
return(ENXIO);
fdc = fd_data[fdu].fdc;
if ((fdc == NULL) || (fd_data[fdu].type == NO_TYPE))
return(ENXIO);
if (type > NUMDENS)
return(ENXIO);
#ifdef PC98
if (pc98_fd_check_ready(fdu) == -1)
return(EIO);
#endif
if (type == 0)
type = fd_data[fdu].type;
#ifndef PC98
else {
if (type != fd_data[fdu].type) {
switch (fd_data[fdu].type) {
case FD_360:
return(ENXIO);
case FD_720:
if ( type != FD_820
&& type != FD_800
)
return(ENXIO);
break;
case FD_1200:
switch (type) {
case FD_1480:
type = FD_1480in5_25;
break;
case FD_1440:
type = FD_1440in5_25;
break;
case FD_820:
type = FD_820in5_25;
break;
case FD_800:
type = FD_800in5_25;
break;
case FD_720:
type = FD_720in5_25;
break;
case FD_360:
type = FD_360in5_25;
break;
default:
return(ENXIO);
}
break;
case FD_1440:
if ( type != FD_1720
&& type != FD_1480
&& type != FD_1200
&& type != FD_820
&& type != FD_800
&& type != FD_720
)
return(ENXIO);
break;
}
}
}
#endif
fd_data[fdu].ft = fd_types + type - 1;
fd_data[fdu].flags |= FD_OPEN;
kdc_fd[fdu].kdc_state = DC_BUSY;
return 0;
}
int
fdclose(dev_t dev, int flags, int mode, struct proc *p)
{
fdu_t fdu = FDUNIT(minor(dev));
#if NFT > 0
int type = FDTYPE(minor(dev));
if (type & F_TAPE_TYPE)
return ftclose(dev, flags);
#endif
fd_data[fdu].flags &= ~FD_OPEN;
fd_data[fdu].options &= ~FDOPT_NORETRY;
kdc_fd[fdu].kdc_state = DC_IDLE;
return(0);
}
/****************************************************************************/
/* fdstrategy */
/****************************************************************************/
void
fdstrategy(struct buf *bp)
{
long nblocks, blknum;
int s;
fdcu_t fdcu;
fdu_t fdu;
fdc_p fdc;
fd_p fd;
size_t fdblk;
fdu = FDUNIT(minor(bp->b_dev));
fd = &fd_data[fdu];
fdc = fd->fdc;
fdcu = fdc->fdcu;
#if NFT > 0
if (FDTYPE(minor(bp->b_dev)) & F_TAPE_TYPE) {
/* ft tapes do not (yet) support strategy i/o */
bp->b_error = ENODEV;
bp->b_flags |= B_ERROR;
goto bad;
}
/* check for controller already busy with tape */
if (fdc->flags & FDC_TAPE_BUSY) {
bp->b_error = EBUSY;
bp->b_flags |= B_ERROR;
goto bad;
}
#endif
fdblk = 128 << (fd->ft->secsize);
if (!(bp->b_flags & B_FORMAT)) {
if ((fdu >= NFD) || (bp->b_blkno < 0)) {
printf(
"fd%d: fdstrat: bad request blkno = %lu, bcount = %ld\n",
fdu, (u_long)bp->b_blkno, bp->b_bcount);
bp->b_error = EINVAL;
bp->b_flags |= B_ERROR;
goto bad;
}
if ((bp->b_bcount % fdblk) != 0) {
bp->b_error = EINVAL;
bp->b_flags |= B_ERROR;
goto bad;
}
}
/*
* Set up block calculations.
*/
blknum = (unsigned long) bp->b_blkno * DEV_BSIZE/fdblk;
nblocks = fd->ft->size;
#ifdef PC98
#define B_XXX2 0x8000000
if (bp->b_flags & B_XXX2) {
blknum *= 2;
bp->b_blkno *= 2;
bp->b_flags &= ~B_XXX2;
}
#endif
if (blknum + (bp->b_bcount / fdblk) > nblocks) {
if (blknum == nblocks) {
bp->b_resid = bp->b_bcount;
} else {
bp->b_error = ENOSPC;
bp->b_flags |= B_ERROR;
}
goto bad;
}
bp->b_cylin = blknum / (fd->ft->sectrac * fd->ft->heads);
bp->b_pblkno = bp->b_blkno;
s = splbio();
tqdisksort(&fdc->head, bp);
untimeout(fd_turnoff, (caddr_t)fdu); /* a good idea */
fdstart(fdcu);
splx(s);
return;
bad:
biodone(bp);
}
/***************************************************************\
* fdstart *
* We have just queued something.. if the controller is not busy *
* then simulate the case where it has just finished a command *
* So that it (the interrupt routine) looks on the queue for more*
* work to do and picks up what we just added. *
* If the controller is already busy, we need do nothing, as it *
* will pick up our work when the present work completes *
\***************************************************************/
static void
fdstart(fdcu_t fdcu)
{
int s;
s = splbio();
if(fdc_data[fdcu].state == DEVIDLE)
{
fdintr(fdcu);
}
splx(s);
}
static void
fd_timeout(void *arg1)
{
fdcu_t fdcu = (fdcu_t)arg1;
fdu_t fdu = fdc_data[fdcu].fdu;
int baseport = fdc_data[fdcu].baseport;
struct buf *bp;
int s;
bp = TAILQ_FIRST(&fdc_data[fdcu].head);
/*
* Due to IBM's brain-dead design, the FDC has a faked ready
* signal, hardwired to ready == true. Thus, any command
* issued if there's no diskette in the drive will _never_
* complete, and must be aborted by resetting the FDC.
* Many thanks, Big Blue!
*/
s = splbio();
TRACE1("fd%d[fd_timeout()]", fdu);
/* See if the controller is still busy (patiently awaiting data) */
if(((inb(baseport + FDSTS)) & (NE7_CB|NE7_RQM)) == NE7_CB)
{
DELAY(5);
TRACE1("[FDSTS->0x%x]", inb(baseport + FDSTS));
/* yup, it is; kill it now */
fdc_reset(&fdc_data[fdcu]);
printf("fd%d: Operation timeout\n", fdu);
}
if (bp)
{
retrier(fdcu);
fdc_data[fdcu].status[0] = NE7_ST0_IC_RC;
fdc_data[fdcu].state = IOTIMEDOUT;
if( fdc_data[fdcu].retry < 6)
fdc_data[fdcu].retry = 6;
}
else
{
fdc_data[fdcu].fd = (fd_p) 0;
fdc_data[fdcu].fdu = -1;
fdc_data[fdcu].state = DEVIDLE;
}
fdintr(fdcu);
splx(s);
}
/* just ensure it has the right spl */
static void
fd_pseudointr(void *arg1)
{
fdcu_t fdcu = (fdcu_t)arg1;
int s;
s = splbio();
fdintr(fdcu);
splx(s);
}
/***********************************************************************\
* fdintr *
* keep calling the state machine until it returns a 0 *
* ALWAYS called at SPLBIO *
\***********************************************************************/
void
fdintr(fdcu_t fdcu)
{
fdc_p fdc = fdc_data + fdcu;
#if NFT > 0
fdu_t fdu = fdc->fdu;
if (fdc->flags & FDC_TAPE_BUSY)
(ftintr(fdu));
else
#endif
while(fdstate(fdcu, fdc))
;
}
/***********************************************************************\
* The controller state machine. *
* if it returns a non zero value, it should be called again immediatly *
\***********************************************************************/
static int
fdstate(fdcu_t fdcu, fdc_p fdc)
{
int read, format, head, sec = 0, sectrac, st0, cyl, st3;
unsigned long blknum;
fdu_t fdu = fdc->fdu;
fd_p fd;
register struct buf *bp;
struct fd_formb *finfo = NULL;
size_t fdblk;
bp = TAILQ_FIRST(&fdc->head);
if(!bp) {
/***********************************************\
* nothing left for this controller to do *
* Force into the IDLE state, *
\***********************************************/
fdc->state = DEVIDLE;
if(fdc->fd)
{
printf("fd%d: unexpected valid fd pointer\n",
fdc->fdu);
fdc->fd = (fd_p) 0;
fdc->fdu = -1;
}
TRACE1("[fdc%d IDLE]", fdcu);
return(0);
}
fdu = FDUNIT(minor(bp->b_dev));
fd = fd_data + fdu;
fdblk = 128 << fd->ft->secsize;
if (fdc->fd && (fd != fdc->fd))
{
printf("fd%d: confused fd pointers\n", fdu);
}
read = bp->b_flags & B_READ;
format = bp->b_flags & B_FORMAT;
if(format)
finfo = (struct fd_formb *)bp->b_un.b_addr;
TRACE1("fd%d", fdu);
TRACE1("[%s]", fdstates[fdc->state]);
TRACE1("(0x%x)", fd->flags);
untimeout(fd_turnoff, (caddr_t)fdu);
timeout(fd_turnoff, (caddr_t)fdu, 4 * hz);
switch (fdc->state)
{
case DEVIDLE:
case FINDWORK: /* we have found new work */
fdc->retry = 0;
fd->skip = 0;
fdc->fd = fd;
fdc->fdu = fdu;
#ifdef PC98
pc98_trans = fd->ft->trans;
if (pc98_trans_prev != pc98_trans) {
int i;
set_density(fdcu, fdu);
for (i = 0; i < 10; i++) {
outb(0x5f, 0);
outb(0x5f, 0);
}
pc98_trans_prev = pc98_trans;
}
if (pc98_trans != fd->pc98_trans) {
if (pc98_trans != 1 &&
(PC98_SYSTEM_PARAMETER(0x5ae) >> fdu) & 0x01) {
outb(0x4be, (fdu << 5) | 0x10 | (pc98_trans >> 1));
outb(0x5f, 0);
outb(0x5f, 0);
}
fd->pc98_trans = pc98_trans;
}
#else
outb(fdc->baseport+FDCTL, fd->ft->trans);
#endif
TRACE1("[0x%x->FDCTL]", fd->ft->trans);
/*******************************************************\
* If the next drive has a motor startup pending, then *
* it will start up in it's own good time *
\*******************************************************/
if(fd->flags & FD_MOTOR_WAIT)
{
fdc->state = MOTORWAIT;
return(0); /* come back later */
}
/*******************************************************\
* Maybe if it's not starting, it SHOULD be starting *
\*******************************************************/
#ifdef EPSON_NRDISK
if (fdu != nrdu) {
if (!(fd->flags & FD_MOTOR))
{
fdc->state = MOTORWAIT;
fd_turnon(fdu);
return(0);
}
else /* at least make sure we are selected */
{
set_motor(fdcu, fd->fdsu, TURNON);
}
}
#else /* !EPSON_NRDISK */
if (!(fd->flags & FD_MOTOR))
{
fdc->state = MOTORWAIT;
fd_turnon(fdu);
return(0);
}
else /* at least make sure we are selected */
{
set_motor(fdcu, fd->fdsu, TURNON);
}
#endif
fdc->state = DOSEEK;
break;
case DOSEEK:
if (bp->b_cylin == fd->track)
{
fdc->state = SEEKCOMPLETE;
break;
}
#ifdef PC98
pc98_fd_check_ready(fdu);
#endif
if (fd_cmd(fdcu, 3, NE7CMD_SEEK,
fd->fdsu, bp->b_cylin * fd->ft->steptrac,
0))
{
/*
* seek command not accepted, looks like
* the FDC went off to the Saints...
*/
fdc->retry = 6; /* try a reset */
return(retrier(fdcu));
}
fd->track = FD_NO_TRACK;
fdc->state = SEEKWAIT;
return(0); /* will return later */
case SEEKWAIT:
/* allow heads to settle */
timeout(fd_pseudointr, (caddr_t)fdcu, hz / 16);
fdc->state = SEEKCOMPLETE;
return(0); /* will return later */
case SEEKCOMPLETE : /* SEEK DONE, START DMA */
/* Make sure seek really happened*/
if(fd->track == FD_NO_TRACK)
{
int descyl = bp->b_cylin * fd->ft->steptrac;
do {
/*
* This might be a "ready changed" interrupt,
* which cannot really happen since the
* RDY pin is hardwired to + 5 volts. This
* generally indicates a "bouncing" intr
* line, so do one of the following:
*
* When running on an enhanced FDC that is
* known to not go stuck after responding
* with INVALID, fetch all interrupt states
* until seeing either an INVALID or a
* real interrupt condition.
*
* When running on a dumb old NE765, give
* up immediately. The controller will
* provide up to four dummy RC interrupt
* conditions right after reset (for the
* corresponding four drives), so this is
* our only chance to get notice that it
* was not the FDC that caused the interrupt.
*/
if (fd_sense_int(fdc, &st0, &cyl)
== FD_NOT_VALID)
return 0;
if(fdc->fdct == FDC_NE765
&& (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC)
return 0; /* hope for a real intr */
} while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC);
if (0 == descyl)
{
int failed = 0;
/*
* seek to cyl 0 requested; make sure we are
* really there
*/
if (fd_sense_drive_status(fdc, &st3))
failed = 1;
#ifdef EPSON_NRDISK
if (fdu == nrdu) st3 = NE7_ST3_T0;
#endif /* EPSON_NRDISK */
if ((st3 & NE7_ST3_T0) == 0) {
printf(
"fd%d: Seek to cyl 0, but not really there (ST3 = %b)\n",
fdu, st3, NE7_ST3BITS);
failed = 1;
}
if (failed)
{
if(fdc->retry < 3)
fdc->retry = 3;
return(retrier(fdcu));
}
}
#ifdef EPSON_NRDISK
if (fdu == nrdu) cyl = descyl;
#endif
if (cyl != descyl)
{
printf(
"fd%d: Seek to cyl %d failed; am at cyl %d (ST0 = 0x%x)\n",
fdu, descyl, cyl, st0);
return(retrier(fdcu));
}
}
fd->track = bp->b_cylin;
if(format)
fd->skip = (char *)&(finfo->fd_formb_cylno(0))
- (char *)finfo;
#ifdef EPSON_NRDISK
if (fdu != nrdu) {
#endif /* EPSON_NRDISK */
#ifdef PC98
pc98_dmastart(bp->b_flags, bp->b_un.b_addr+fd->skip,
#else
isa_dmastart(bp->b_flags, bp->b_un.b_addr+fd->skip,
#endif
format ? bp->b_bcount : fdblk, fdc->dmachan);
blknum = (unsigned long)bp->b_blkno*DEV_BSIZE/fdblk
+ fd->skip/fdblk;
sectrac = fd->ft->sectrac;
sec = blknum % (sectrac * fd->ft->heads);
head = sec / sectrac;
sec = sec % sectrac + 1;
fd->hddrv = ((head&1)<<2)+fdu;
if(format || !read)
{
/* make sure the drive is writable */
if(fd_sense_drive_status(fdc, &st3) != 0)
{
/* stuck controller? */
fdc->retry = 6; /* reset the beast */
return(retrier(fdcu));
}
if(st3 & NE7_ST3_WP)
{
/*
* XXX YES! this is ugly.
* in order to force the current operation
* to fail, we will have to fake an FDC
* error - all error handling is done
* by the retrier()
*/
fdc->status[0] = NE7_ST0_IC_AT;
fdc->status[1] = NE7_ST1_NW;
fdc->status[2] = 0;
fdc->status[3] = fd->track;
fdc->status[4] = head;
fdc->status[5] = sec;
fdc->retry = 8; /* break out immediately */
fdc->state = IOTIMEDOUT; /* not really... */
return (1);
}
}
if(format)
{
/* formatting */
if(fd_cmd(fdcu, 6,
NE7CMD_FORMAT,
head << 2 | fdu,
finfo->fd_formb_secshift,
finfo->fd_formb_nsecs,
finfo->fd_formb_gaplen,
finfo->fd_formb_fillbyte,
0))
{
/* controller fell over */
fdc->retry = 6;
return(retrier(fdcu));
}
}
else
{
if (fd_cmd(fdcu, 9,
(read ? NE7CMD_READ : NE7CMD_WRITE),
head << 2 | fdu, /* head & unit */
fd->track, /* track */
head,
sec, /* sector + 1 */
fd->ft->secsize, /* sector size */
sectrac, /* sectors/track */
fd->ft->gap, /* gap size */
fd->ft->datalen, /* data length */
0))
{
/* the beast is sleeping again */
fdc->retry = 6;
return(retrier(fdcu));
}
}
fdc->state = IOCOMPLETE;
timeout(fd_timeout, (caddr_t)fdcu, hz);
return(0); /* will return later */
#ifdef EPSON_NRDISK
}
else {
nrdblkn = (nrd_t)((unsigned long)bp->b_blkno*DEV_BSIZE/fdblk
+ fd->skip/fdblk);
nrd_LED_on();
nrd_addrset(fdblk * nrdblkn);
while (!nrd_check_ready()) DELAY(1);
if (read) epson_insw(P_NRD_DATA,
bp->b_un.b_addr + fd->skip,
fdblk / sizeof(short));
else epson_outsw(P_NRD_DATA,
bp->b_un.b_addr + fd->skip,
(format ? bp->b_bcount : fdblk)
/ sizeof(short));
blknum = (unsigned long)bp->b_blkno*DEV_BSIZE/fdblk
+ fd->skip/fdblk;
sectrac = fd->ft->sectrac;
sec = blknum % (sectrac * fd->ft->heads);
head = sec / sectrac;
sec = sec % sectrac + 1;
fd->hddrv = ((head&1)<<2)+fdu;
if (nrdsec++ >= nrd_sec())
nrdaddr = (nrd_t)(fd->track * 8 + head * 4);
nrdsec = sec;
fdc->state = IOCOMPLETE;
}
#endif
case IOCOMPLETE: /* IO DONE, post-analyze */
#ifdef EPSON_NRDISK
if (fdu != nrdu) untimeout(fd_timeout, (caddr_t)fdcu);
#else
untimeout(fd_timeout, (caddr_t)fdcu);
#endif
if (fd_read_status(fdc, fd->fdsu))
{
if (fdc->retry < 6)
fdc->retry = 6; /* force a reset */
return retrier(fdcu);
}
fdc->state = IOTIMEDOUT;
/* FALLTHROUGH */
case IOTIMEDOUT:
#ifdef EPSON_NRDISK
if (fdu != nrdu) {
#endif /* EPSON_NRDISK */
#ifdef PC98
pc98_dmadone(bp->b_flags, bp->b_un.b_addr+fd->skip,
#else
isa_dmadone(bp->b_flags, bp->b_un.b_addr+fd->skip,
#endif
format ? bp->b_bcount : fdblk, fdc->dmachan);
#ifdef EPSON_NRDISK
}
else nrd_LED_off();
#endif /* EPSON_NRDISK */
if (fdc->status[0] & NE7_ST0_IC)
{
if ((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT
&& fdc->status[1] & NE7_ST1_OR) {
/*
* DMA overrun. Someone hogged the bus
* and didn't release it in time for the
* next FDC transfer.
* Just restart it, don't increment retry
* count. (vak)
*/
fdc->state = SEEKCOMPLETE;
return (1);
}
else if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_IV
&& fdc->retry < 6)
fdc->retry = 6; /* force a reset */
else if((fdc->status[0] & NE7_ST0_IC) == NE7_ST0_IC_AT
&& fdc->status[2] & NE7_ST2_WC
&& fdc->retry < 3)
fdc->retry = 3; /* force recalibrate */
return(retrier(fdcu));
}
/* All OK */
fd->skip += fdblk;
if (!format && fd->skip < bp->b_bcount)
{
/* set up next transfer */
blknum = (unsigned long)bp->b_blkno*DEV_BSIZE/fdblk
+ fd->skip/fdblk;
#ifdef EPSON_NRDISK
nrdblkn = (unsigned long)bp->b_blkno*DEV_BSIZE/fdblk
+ fd->skip/fdblk;
#endif
bp->b_cylin =
(blknum / (fd->ft->sectrac * fd->ft->heads));
fdc->state = DOSEEK;
}
else
{
/* ALL DONE */
fd->skip = 0;
bp->b_resid = 0;
TAILQ_REMOVE(&fdc->head, bp, b_act);
biodone(bp);
fdc->fd = (fd_p) 0;
fdc->fdu = -1;
fdc->state = FINDWORK;
}
return(1);
case RESETCTLR:
fdc_reset(fdc);
fdc->retry++;
fdc->state = STARTRECAL;
break;
case STARTRECAL:
/* XXX clear the fdc results from the last reset, if any. */
{
int i;
for (i = 0; i < 4; i++)
(void)fd_sense_int(fdc, &st0, &cyl);
}
#ifdef PC98
pc98_fd_check_ready(fdu);
#endif
if(fd_cmd(fdcu,
2, NE7CMD_RECAL, fdu,
0)) /* Recalibrate Function */
{
/* arrgl */
fdc->retry = 6;
return(retrier(fdcu));
}
fdc->state = RECALWAIT;
return(0); /* will return later */
case RECALWAIT:
/* allow heads to settle */
timeout(fd_pseudointr, (caddr_t)fdcu, hz / 8);
fdc->state = RECALCOMPLETE;
return(0); /* will return later */
case RECALCOMPLETE:
do {
/*
* See SEEKCOMPLETE for a comment on this:
*/
if (fd_sense_int(fdc, &st0, &cyl) == FD_NOT_VALID)
return 0;
if(fdc->fdct == FDC_NE765
&& (st0 & NE7_ST0_IC) == NE7_ST0_IC_RC)
return 0; /* hope for a real intr */
} while ((st0 & NE7_ST0_IC) == NE7_ST0_IC_RC);
#ifdef EPSON_NRDISK
if (fdu == nrdu) {
st0 = NE7_ST0_IC_NT;
cyl = 0;
}
#endif
if ((st0 & NE7_ST0_IC) != NE7_ST0_IC_NT || cyl != 0)
{
if(fdc->retry > 3)
/*
* a recalibrate from beyond cylinder 77
* will "fail" due to the FDC limitations;
* since people used to complain much about
* the failure message, try not logging
* this one if it seems to be the first
* time in a line
*/
printf("fd%d: recal failed ST0 %b cyl %d\n",
fdu, st0, NE7_ST0BITS, cyl);
if(fdc->retry < 3) fdc->retry = 3;
return(retrier(fdcu));
}
fd->track = 0;
/* Seek (probably) necessary */
fdc->state = DOSEEK;
return(1); /* will return immediatly */
case MOTORWAIT:
if(fd->flags & FD_MOTOR_WAIT)
{
return(0); /* time's not up yet */
}
/*
* since the controller was off, it has lost its
* idea about the current track it were; thus,
* recalibrate the bastard
*/
fdc->state = STARTRECAL;
return(1); /* will return immediatly */
default:
printf("fdc%d: Unexpected FD int->", fdcu);
if (fd_read_status(fdc, fd->fdsu) == 0)
printf("FDC status :%lx %lx %lx %lx %lx %lx %lx ",
fdc->status[0],
fdc->status[1],
fdc->status[2],
fdc->status[3],
fdc->status[4],
fdc->status[5],
fdc->status[6] );
else
printf("No status available ");
if (fd_sense_int(fdc, &st0, &cyl) != 0)
{
printf("[controller is dead now]\n");
return(0);
}
printf("ST0 = %x, PCN = %x\n", st0, cyl);
return(0);
}
/*XXX confusing: some branches return immediately, others end up here*/
return(1); /* Come back immediatly to new state */
}
static int
retrier(fdcu)
fdcu_t fdcu;
{
fdc_p fdc = fdc_data + fdcu;
register struct buf *bp;
bp = TAILQ_FIRST(&fdc->head);
if(fd_data[FDUNIT(minor(bp->b_dev))].options & FDOPT_NORETRY)
goto fail;
switch(fdc->retry)
{
case 0: case 1: case 2:
fdc->state = SEEKCOMPLETE;
break;
case 3: case 4: case 5:
fdc->state = STARTRECAL;
break;
case 6:
fdc->state = RESETCTLR;
break;
case 7:
break;
default:
fail:
{
dev_t sav_b_dev = bp->b_dev;
/* Trick diskerr */
bp->b_dev = makedev(major(bp->b_dev),
(FDUNIT(minor(bp->b_dev))<<3)|RAW_PART);
diskerr(bp, "fd", "hard error", LOG_PRINTF,
fdc->fd->skip / DEV_BSIZE,
(struct disklabel *)NULL);
bp->b_dev = sav_b_dev;
if (fdc->flags & FDC_STAT_VALID)
{
printf(
" (ST0 %b ST1 %b ST2 %b cyl %ld hd %ld sec %ld)\n",
fdc->status[0], NE7_ST0BITS,
fdc->status[1], NE7_ST1BITS,
fdc->status[2], NE7_ST2BITS,
fdc->status[3], fdc->status[4],
fdc->status[5]);
}
else
printf(" (No status)\n");
}
bp->b_flags |= B_ERROR;
bp->b_error = EIO;
bp->b_resid = bp->b_bcount - fdc->fd->skip;
TAILQ_REMOVE(&fdc->head, bp, b_act);
fdc->fd->skip = 0;
biodone(bp);
fdc->state = FINDWORK;
fdc->fd = (fd_p) 0;
fdc->fdu = -1;
/* XXX abort current command, if any. */
return(1);
}
fdc->retry++;
return(1);
}
static int
fdformat(dev, finfo, p)
dev_t dev;
struct fd_formb *finfo;
struct proc *p;
{
fdu_t fdu;
fd_p fd;
struct buf *bp;
int rv = 0, s;
size_t fdblk;
fdu = FDUNIT(minor(dev));
fd = &fd_data[fdu];
fdblk = 128 << fd->ft->secsize;
/* set up a buffer header for fdstrategy() */
bp = (struct buf *)malloc(sizeof(struct buf), M_TEMP, M_NOWAIT);
if(bp == 0)
return ENOBUFS;
/*
* keep the process from being swapped
*/
p->p_flag |= P_PHYSIO;
bzero((void *)bp, sizeof(struct buf));
bp->b_flags = B_BUSY | B_PHYS | B_FORMAT;
bp->b_proc = p;
bp->b_dev = dev;
/*
* calculate a fake blkno, so fdstrategy() would initiate a
* seek to the requested cylinder
*/
bp->b_blkno = (finfo->cyl * (fd->ft->sectrac * fd->ft->heads)
+ finfo->head * fd->ft->sectrac) * fdblk / DEV_BSIZE;
bp->b_bcount = sizeof(struct fd_idfield_data) * finfo->fd_formb_nsecs;
bp->b_un.b_addr = (caddr_t)finfo;
/* now do the format */
fdstrategy(bp);
/* ...and wait for it to complete */
s = splbio();
while(!(bp->b_flags & B_DONE))
{
rv = tsleep((caddr_t)bp, PRIBIO, "fdform", 20 * hz);
if(rv == EWOULDBLOCK)
break;
}
splx(s);
if(rv == EWOULDBLOCK) {
/* timed out */
rv = EIO;
biodone(bp);
}
if(bp->b_flags & B_ERROR)
rv = bp->b_error;
/*
* allow the process to be swapped
*/
p->p_flag &= ~P_PHYSIO;
free(bp, M_TEMP);
return rv;
}
/*
* TODO: don't allocate buffer on stack.
*/
int
fdioctl(dev, cmd, addr, flag, p)
dev_t dev;
int cmd;
caddr_t addr;
int flag;
struct proc *p;
{
fdu_t fdu = FDUNIT(minor(dev));
fd_p fd = &fd_data[fdu];
size_t fdblk;
struct fd_type *fdt;
struct disklabel *dl;
char buffer[DEV_BSIZE];
int error = 0;
#if NFT > 0
int type = FDTYPE(minor(dev));
/* check for a tape ioctl */
if (type & F_TAPE_TYPE)
return ftioctl(dev, cmd, addr, flag, p);
#endif
fdblk = 128 << fd->ft->secsize;
#ifdef PC98
pc98_fd_check_ready(fdu);
#endif
switch (cmd)
{
case DIOCGDINFO:
bzero(buffer, sizeof (buffer));
dl = (struct disklabel *)buffer;
dl->d_secsize = fdblk;
fdt = fd_data[FDUNIT(minor(dev))].ft;
dl->d_secpercyl = fdt->size / fdt->tracks;
dl->d_type = DTYPE_FLOPPY;
if (readdisklabel(dkmodpart(dev, RAW_PART), fdstrategy, dl)
== NULL)
error = 0;
else
error = EINVAL;
*(struct disklabel *)addr = *dl;
break;
case DIOCSDINFO:
if ((flag & FWRITE) == 0)
error = EBADF;
break;
case DIOCWLABEL:
if ((flag & FWRITE) == 0)
error = EBADF;
break;
case DIOCWDINFO:
if ((flag & FWRITE) == 0)
{
error = EBADF;
break;
}
dl = (struct disklabel *)addr;
if ((error = setdisklabel((struct disklabel *)buffer, dl,
(u_long)0)) != 0)
break;
error = writedisklabel(dev, fdstrategy,
(struct disklabel *)buffer);
break;
case FD_FORM:
if((flag & FWRITE) == 0)
error = EBADF; /* must be opened for writing */
else if(((struct fd_formb *)addr)->format_version !=
FD_FORMAT_VERSION)
error = EINVAL; /* wrong version of formatting prog */
else
error = fdformat(dev, (struct fd_formb *)addr, p);
break;
case FD_GTYPE: /* get drive type */
*(struct fd_type *)addr = *fd_data[FDUNIT(minor(dev))].ft;
break;
case FD_STYPE: /* set drive type */
/* this is considered harmful; only allow for superuser */
if(suser(p->p_ucred, &p->p_acflag) != 0)
return EPERM;
*fd_data[FDUNIT(minor(dev))].ft = *(struct fd_type *)addr;
break;
case FD_GOPTS: /* get drive options */
*(int *)addr = fd_data[FDUNIT(minor(dev))].options;
break;
case FD_SOPTS: /* set drive options */
fd_data[FDUNIT(minor(dev))].options = *(int *)addr;
break;
default:
error = ENOTTY;
break;
}
return (error);
}
static fd_devsw_installed = 0;
static void fd_drvinit(void *notused )
{
if( ! fd_devsw_installed ) {
bdevsw_add_generic(BDEV_MAJOR,CDEV_MAJOR, &fd_bdevsw);
fd_devsw_installed = 1;
}
}
SYSINIT(fddev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,fd_drvinit,NULL)
#endif
/*
* Hello emacs, these are the
* Local Variables:
* c-indent-level: 8
* c-continued-statement-offset: 8
* c-continued-brace-offset: 0
* c-brace-offset: -8
* c-brace-imaginary-offset: 0
* c-argdecl-indent: 8
* c-label-offset: -8
* c++-hanging-braces: 1
* c++-access-specifier-offset: -8
* c++-empty-arglist-indent: 8
* c++-friend-offset: 0
* End:
*/
Reference in New Issue View Git Blame Copy Permalink