1
0
mirror of https://git.FreeBSD.org/src.git synced 2025-01-17 15:27:36 +00:00
freebsd/usr.sbin/bhyve/pci_lpc.c
John Baldwin b3e9732a76 Implement a PCI interrupt router to route PCI legacy INTx interrupts to
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
  8 steerable pins configured via config space access to byte-wide
  registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
  pin and a PCI interrupt router pin.  When a PCI INTx interrupt is
  asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
  8259A pins (ISA IRQs) and initialize the interrupt line config register
  for the corresponding PCI function with the ISA IRQ as this matches
  existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
  configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
  PRT tables and return the appropriate table based on the configured
  routing configuration.  Note that if the lpc device is not configured, no
  routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
  to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
  pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
  the DSDT.  iasl(8) will fill in the actual number of elements, and
  this makes it simpler to generate a Package with a variable number of
  elements.

Reviewed by:	tycho
2014-05-15 14:16:55 +00:00

431 lines
9.6 KiB
C

/*-
* Copyright (c) 2013 Neel Natu <neel@freebsd.org>
* Copyright (c) 2013 Tycho Nightingale <tycho.nightingale@pluribusnetworks.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY NETAPP, INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL NETAPP, INC OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/types.h>
#include <machine/vmm.h>
#include <machine/vmm_dev.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <vmmapi.h>
#include "acpi.h"
#include "inout.h"
#include "pci_emul.h"
#include "pci_irq.h"
#include "pci_lpc.h"
#include "uart_emul.h"
#define IO_ICU1 0x20
#define IO_ICU2 0xA0
SET_DECLARE(lpc_dsdt_set, struct lpc_dsdt);
SET_DECLARE(lpc_sysres_set, struct lpc_sysres);
#define ELCR_PORT 0x4d0
SYSRES_IO(ELCR_PORT, 2);
#define IO_TIMER1_PORT 0x40
#define NMISC_PORT 0x61
SYSRES_IO(NMISC_PORT, 1);
static struct pci_devinst *lpc_bridge;
#define LPC_UART_NUM 2
static struct lpc_uart_softc {
struct uart_softc *uart_softc;
const char *opts;
int iobase;
int irq;
int enabled;
} lpc_uart_softc[LPC_UART_NUM];
static const char *lpc_uart_names[LPC_UART_NUM] = { "COM1", "COM2" };
/*
* LPC device configuration is in the following form:
* <lpc_device_name>[,<options>]
* For e.g. "com1,stdio"
*/
int
lpc_device_parse(const char *opts)
{
int unit, error;
char *str, *cpy, *lpcdev;
error = -1;
str = cpy = strdup(opts);
lpcdev = strsep(&str, ",");
if (lpcdev != NULL) {
for (unit = 0; unit < LPC_UART_NUM; unit++) {
if (strcasecmp(lpcdev, lpc_uart_names[unit]) == 0) {
lpc_uart_softc[unit].opts = str;
error = 0;
goto done;
}
}
}
done:
if (error)
free(cpy);
return (error);
}
static void
lpc_uart_intr_assert(void *arg)
{
struct lpc_uart_softc *sc = arg;
assert(sc->irq >= 0);
vm_isa_pulse_irq(lpc_bridge->pi_vmctx, sc->irq, sc->irq);
}
static void
lpc_uart_intr_deassert(void *arg)
{
/*
* The COM devices on the LPC bus generate edge triggered interrupts,
* so nothing more to do here.
*/
}
static int
lpc_uart_io_handler(struct vmctx *ctx, int vcpu, int in, int port, int bytes,
uint32_t *eax, void *arg)
{
int offset;
struct lpc_uart_softc *sc = arg;
offset = port - sc->iobase;
switch (bytes) {
case 1:
if (in)
*eax = uart_read(sc->uart_softc, offset);
else
uart_write(sc->uart_softc, offset, *eax);
break;
case 2:
if (in) {
*eax = uart_read(sc->uart_softc, offset);
*eax |= uart_read(sc->uart_softc, offset + 1) << 8;
} else {
uart_write(sc->uart_softc, offset, *eax);
uart_write(sc->uart_softc, offset + 1, *eax >> 8);
}
break;
default:
return (-1);
}
return (0);
}
static int
lpc_init(void)
{
struct lpc_uart_softc *sc;
struct inout_port iop;
const char *name;
int unit, error;
/* COM1 and COM2 */
for (unit = 0; unit < LPC_UART_NUM; unit++) {
sc = &lpc_uart_softc[unit];
name = lpc_uart_names[unit];
if (uart_legacy_alloc(unit, &sc->iobase, &sc->irq) != 0) {
fprintf(stderr, "Unable to allocate resources for "
"LPC device %s\n", name);
return (-1);
}
pci_irq_reserve(sc->irq);
sc->uart_softc = uart_init(lpc_uart_intr_assert,
lpc_uart_intr_deassert, sc);
if (uart_set_backend(sc->uart_softc, sc->opts) != 0) {
fprintf(stderr, "Unable to initialize backend '%s' "
"for LPC device %s\n", sc->opts, name);
return (-1);
}
bzero(&iop, sizeof(struct inout_port));
iop.name = name;
iop.port = sc->iobase;
iop.size = UART_IO_BAR_SIZE;
iop.flags = IOPORT_F_INOUT;
iop.handler = lpc_uart_io_handler;
iop.arg = sc;
error = register_inout(&iop);
assert(error == 0);
sc->enabled = 1;
}
return (0);
}
static void
pci_lpc_write_dsdt(struct pci_devinst *pi)
{
struct lpc_dsdt **ldpp, *ldp;
dsdt_line("");
dsdt_line("Device (ISA)");
dsdt_line("{");
dsdt_line(" Name (_ADR, 0x%04X%04X)", pi->pi_slot, pi->pi_func);
dsdt_line(" OperationRegion (LPCR, PCI_Config, 0x00, 0x100)");
dsdt_line(" Field (LPCR, AnyAcc, NoLock, Preserve)");
dsdt_line(" {");
dsdt_line(" Offset (0x60),");
dsdt_line(" PIRA, 8,");
dsdt_line(" PIRB, 8,");
dsdt_line(" PIRC, 8,");
dsdt_line(" PIRD, 8,");
dsdt_line(" Offset (0x68),");
dsdt_line(" PIRE, 8,");
dsdt_line(" PIRF, 8,");
dsdt_line(" PIRG, 8,");
dsdt_line(" PIRH, 8");
dsdt_line(" }");
dsdt_line("");
dsdt_indent(1);
SET_FOREACH(ldpp, lpc_dsdt_set) {
ldp = *ldpp;
ldp->handler();
}
dsdt_line("");
dsdt_line("Device (PIC)");
dsdt_line("{");
dsdt_line(" Name (_HID, EisaId (\"PNP0000\"))");
dsdt_line(" Name (_CRS, ResourceTemplate ()");
dsdt_line(" {");
dsdt_indent(2);
dsdt_fixed_ioport(IO_ICU1, 2);
dsdt_fixed_ioport(IO_ICU2, 2);
dsdt_fixed_irq(2);
dsdt_unindent(2);
dsdt_line(" })");
dsdt_line("}");
dsdt_line("");
dsdt_line("Device (TIMR)");
dsdt_line("{");
dsdt_line(" Name (_HID, EisaId (\"PNP0100\"))");
dsdt_line(" Name (_CRS, ResourceTemplate ()");
dsdt_line(" {");
dsdt_indent(2);
dsdt_fixed_ioport(IO_TIMER1_PORT, 4);
dsdt_fixed_irq(0);
dsdt_unindent(2);
dsdt_line(" })");
dsdt_line("}");
dsdt_unindent(1);
dsdt_line("}");
}
static void
pci_lpc_sysres_dsdt(void)
{
struct lpc_sysres **lspp, *lsp;
dsdt_line("");
dsdt_line("Device (SIO)");
dsdt_line("{");
dsdt_line(" Name (_HID, EisaId (\"PNP0C02\"))");
dsdt_line(" Name (_CRS, ResourceTemplate ()");
dsdt_line(" {");
dsdt_indent(2);
SET_FOREACH(lspp, lpc_sysres_set) {
lsp = *lspp;
switch (lsp->type) {
case LPC_SYSRES_IO:
dsdt_fixed_ioport(lsp->base, lsp->length);
break;
case LPC_SYSRES_MEM:
dsdt_fixed_mem32(lsp->base, lsp->length);
break;
}
}
dsdt_unindent(2);
dsdt_line(" })");
dsdt_line("}");
}
LPC_DSDT(pci_lpc_sysres_dsdt);
static void
pci_lpc_uart_dsdt(void)
{
struct lpc_uart_softc *sc;
int unit;
for (unit = 0; unit < LPC_UART_NUM; unit++) {
sc = &lpc_uart_softc[unit];
if (!sc->enabled)
continue;
dsdt_line("");
dsdt_line("Device (%s)", lpc_uart_names[unit]);
dsdt_line("{");
dsdt_line(" Name (_HID, EisaId (\"PNP0501\"))");
dsdt_line(" Name (_UID, %d)", unit + 1);
dsdt_line(" Name (_CRS, ResourceTemplate ()");
dsdt_line(" {");
dsdt_indent(2);
dsdt_fixed_ioport(sc->iobase, UART_IO_BAR_SIZE);
dsdt_fixed_irq(sc->irq);
dsdt_unindent(2);
dsdt_line(" })");
dsdt_line("}");
}
}
LPC_DSDT(pci_lpc_uart_dsdt);
static int
pci_lpc_cfgwrite(struct vmctx *ctx, int vcpu, struct pci_devinst *pi,
int coff, int bytes, uint32_t val)
{
int pirq_pin;
if (bytes == 1) {
pirq_pin = 0;
if (coff >= 0x60 && coff <= 0x63)
pirq_pin = coff - 0x60 + 1;
if (coff >= 0x68 && coff <= 0x6b)
pirq_pin = coff - 0x68 + 5;
if (pirq_pin != 0) {
pirq_write(ctx, pirq_pin, val);
pci_set_cfgdata8(pi, coff, pirq_read(pirq_pin));
return (0);
}
}
return (-1);
}
static void
pci_lpc_write(struct vmctx *ctx, int vcpu, struct pci_devinst *pi,
int baridx, uint64_t offset, int size, uint64_t value)
{
}
static uint64_t
pci_lpc_read(struct vmctx *ctx, int vcpu, struct pci_devinst *pi,
int baridx, uint64_t offset, int size)
{
return (0);
}
#define LPC_DEV 0x7000
#define LPC_VENDOR 0x8086
static int
pci_lpc_init(struct vmctx *ctx, struct pci_devinst *pi, char *opts)
{
/*
* Do not allow more than one LPC bridge to be configured.
*/
if (lpc_bridge != NULL) {
fprintf(stderr, "Only one LPC bridge is allowed.\n");
return (-1);
}
/*
* Enforce that the LPC can only be configured on bus 0. This
* simplifies the ACPI DSDT because it can provide a decode for
* all legacy i/o ports behind bus 0.
*/
if (pi->pi_bus != 0) {
fprintf(stderr, "LPC bridge can be present only on bus 0.\n");
return (-1);
}
if (lpc_init() != 0)
return (-1);
/* initialize config space */
pci_set_cfgdata16(pi, PCIR_DEVICE, LPC_DEV);
pci_set_cfgdata16(pi, PCIR_VENDOR, LPC_VENDOR);
pci_set_cfgdata8(pi, PCIR_CLASS, PCIC_BRIDGE);
pci_set_cfgdata8(pi, PCIR_SUBCLASS, PCIS_BRIDGE_ISA);
lpc_bridge = pi;
return (0);
}
char *
lpc_pirq_name(int pin)
{
char *name;
if (lpc_bridge == NULL)
return (NULL);
asprintf(&name, "\\_SB.PC00.ISA.LNK%c,", 'A' + pin - 1);
return (name);
}
void
lpc_pirq_routed(void)
{
int pin;
if (lpc_bridge == NULL)
return;
for (pin = 0; pin < 4; pin++)
pci_set_cfgdata8(lpc_bridge, 0x60 + pin, pirq_read(pin + 1));
for (pin = 0; pin < 4; pin++)
pci_set_cfgdata8(lpc_bridge, 0x68 + pin, pirq_read(pin + 5));
}
struct pci_devemu pci_de_lpc = {
.pe_emu = "lpc",
.pe_init = pci_lpc_init,
.pe_write_dsdt = pci_lpc_write_dsdt,
.pe_cfgwrite = pci_lpc_cfgwrite,
.pe_barwrite = pci_lpc_write,
.pe_barread = pci_lpc_read
};
PCI_EMUL_SET(pci_de_lpc);