mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-26 11:47:31 +00:00
Code Issues Releases Activity
b489b4075c
freebsd/sys/dev/usb/ohci.c
Julian Elischer b40ce4165d KSE Milestone 2 
Note ALL MODULES MUST BE RECOMPILED
make the kernel aware that there are smaller units of scheduling than the
process. (but only allow one thread per process at this time).
This is functionally equivalent to teh previousl -current except
that there is a thread associated with each process.

Sorry john! (your next MFC will be a doosie!)

Reviewed by: peter@freebsd.org, dillon@freebsd.org

X-MFC after:    ha ha ha ha
2001-09-12 08:38:13 +00:00

2980 lines
72 KiB
C
Raw Blame History

/* $NetBSD: ohci.c,v 1.64 2000/01/19 00:23:58 augustss Exp $ */
/* $FreeBSD$ */
/*
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Lennart Augustsson (lennart@augustsson.net) at
* Carlstedt Research & Technology.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* USB Open Host Controller driver.
*
* OHCI spec: ftp://ftp.compaq.com/pub/supportinformation/papers/hcir1_0a.exe
* USB spec: http://www.usb.org/developers/data/usb11.pdf
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#if defined(__NetBSD__) || defined(__OpenBSD__)
#include <sys/kernel.h>
#include <sys/device.h>
#include <sys/select.h>
#elif defined(__FreeBSD__)
#include <sys/module.h>
#include <sys/bus.h>
#include <machine/bus_pio.h>
#include <machine/bus_memio.h>
#if defined(DIAGNOSTIC) && defined(__i386__) && defined(__FreeBSD__)
#include <machine/cpu.h>
#endif
#endif
#include <sys/queue.h>
#include <machine/bus.h>
#include <machine/endian.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>
#include <dev/usb/usb_quirks.h>
#include <dev/usb/ohcireg.h>
#include <dev/usb/ohcivar.h>
#if defined(__FreeBSD__)
#include <machine/clock.h>
#define delay(d) DELAY(d)
#endif
#if defined(__OpenBSD__)
struct cfdriver ohci_cd = {
NULL, "ohci", DV_DULL
};
#endif
#ifdef OHCI_DEBUG
#define DPRINTF(x) if (ohcidebug) logprintf x
#define DPRINTFN(n,x) if (ohcidebug>(n)) logprintf x
int ohcidebug = 1;
#else
#define DPRINTF(x)
#define DPRINTFN(n,x)
#endif
/*
* The OHCI controller is little endian, so on big endian machines
* the data strored in memory needs to be swapped.
*/
#if BYTE_ORDER == BIG_ENDIAN
#define LE(x) (bswap32(x))
#else
#define LE(x) (x)
#endif
struct ohci_pipe;
Static ohci_soft_ed_t *ohci_alloc_sed(ohci_softc_t *);
Static void ohci_free_sed(ohci_softc_t *, ohci_soft_ed_t *);
Static ohci_soft_td_t *ohci_alloc_std(ohci_softc_t *);
Static void ohci_free_std(ohci_softc_t *, ohci_soft_td_t *);
Static ohci_soft_itd_t *ohci_alloc_sitd(ohci_softc_t *);
Static void ohci_free_sitd(ohci_softc_t *,ohci_soft_itd_t *);
#if 0
Static void ohci_free_std_chain(ohci_softc_t *,
ohci_soft_td_t *, ohci_soft_td_t *);
#endif
Static usbd_status ohci_alloc_std_chain(struct ohci_pipe *,
ohci_softc_t *, int, int, u_int16_t, usb_dma_t *,
ohci_soft_td_t *, ohci_soft_td_t **);
#if defined(__NetBSD__) || defined(__OpenBSD__)
Static void ohci_shutdown(void *v);
Static void ohci_power(int, void *);
#endif
Static usbd_status ohci_open(usbd_pipe_handle);
Static void ohci_poll(struct usbd_bus *);
Static void ohci_waitintr(ohci_softc_t *,
usbd_xfer_handle);
Static void ohci_rhsc(ohci_softc_t *, usbd_xfer_handle);
Static void ohci_process_done(ohci_softc_t *,
ohci_physaddr_t);
Static usbd_status ohci_device_request(usbd_xfer_handle xfer);
Static void ohci_add_ed(ohci_soft_ed_t *, ohci_soft_ed_t *);
Static void ohci_rem_ed(ohci_soft_ed_t *, ohci_soft_ed_t *);
Static void ohci_hash_add_td(ohci_softc_t *,
ohci_soft_td_t *);
Static void ohci_hash_rem_td(ohci_softc_t *,
ohci_soft_td_t *);
Static ohci_soft_td_t *ohci_hash_find_td(ohci_softc_t *,
ohci_physaddr_t);
Static usbd_status ohci_setup_isoc(usbd_pipe_handle pipe);
Static void ohci_device_isoc_enter(usbd_xfer_handle);
Static usbd_status ohci_allocm(struct usbd_bus *, usb_dma_t *,
u_int32_t);
Static void ohci_freem(struct usbd_bus *, usb_dma_t *);
Static usbd_xfer_handle ohci_allocx(struct usbd_bus *);
Static void ohci_freex(struct usbd_bus *, usbd_xfer_handle);
Static usbd_status ohci_root_ctrl_transfer(usbd_xfer_handle);
Static usbd_status ohci_root_ctrl_start(usbd_xfer_handle);
Static void ohci_root_ctrl_abort(usbd_xfer_handle);
Static void ohci_root_ctrl_close(usbd_pipe_handle);
Static usbd_status ohci_root_intr_transfer(usbd_xfer_handle);
Static usbd_status ohci_root_intr_start(usbd_xfer_handle);
Static void ohci_root_intr_abort(usbd_xfer_handle);
Static void ohci_root_intr_close(usbd_pipe_handle);
Static void ohci_root_intr_done (usbd_xfer_handle);
Static usbd_status ohci_device_ctrl_transfer(usbd_xfer_handle);
Static usbd_status ohci_device_ctrl_start(usbd_xfer_handle);
Static void ohci_device_ctrl_abort(usbd_xfer_handle);
Static void ohci_device_ctrl_close(usbd_pipe_handle);
Static void ohci_device_ctrl_done (usbd_xfer_handle);
Static usbd_status ohci_device_bulk_transfer(usbd_xfer_handle);
Static usbd_status ohci_device_bulk_start(usbd_xfer_handle);
Static void ohci_device_bulk_abort(usbd_xfer_handle);
Static void ohci_device_bulk_close(usbd_pipe_handle);
Static void ohci_device_bulk_done (usbd_xfer_handle);
Static usbd_status ohci_device_intr_transfer(usbd_xfer_handle);
Static usbd_status ohci_device_intr_start(usbd_xfer_handle);
Static void ohci_device_intr_abort(usbd_xfer_handle);
Static void ohci_device_intr_close(usbd_pipe_handle);
Static void ohci_device_intr_done (usbd_xfer_handle);
Static usbd_status ohci_device_isoc_transfer(usbd_xfer_handle);
Static usbd_status ohci_device_isoc_start(usbd_xfer_handle);
Static void ohci_device_isoc_abort(usbd_xfer_handle);
Static void ohci_device_isoc_close(usbd_pipe_handle);
Static void ohci_device_isoc_done (usbd_xfer_handle);
Static usbd_status ohci_device_setintr(ohci_softc_t *sc,
struct ohci_pipe *pipe, int ival);
Static int ohci_str(usb_string_descriptor_t *, int, const char *);
Static void ohci_timeout(void *);
Static void ohci_rhsc_able(ohci_softc_t *, int);
Static void ohci_close_pipe(usbd_pipe_handle pipe,
ohci_soft_ed_t *head);
Static void ohci_abort_xfer(usbd_xfer_handle xfer,
usbd_status status);
Static void ohci_abort_xfer_end(void *);
Static void ohci_device_clear_toggle(usbd_pipe_handle pipe);
Static void ohci_noop(usbd_pipe_handle pipe);
#ifdef OHCI_DEBUG
Static void ohci_dumpregs(ohci_softc_t *);
Static void ohci_dump_tds(ohci_soft_td_t *);
Static void ohci_dump_td(ohci_soft_td_t *);
Static void ohci_dump_ed(ohci_soft_ed_t *);
#endif
#define OWRITE4(sc, r, x) bus_space_write_4((sc)->iot, (sc)->ioh, (r), (x))
#define OREAD4(sc, r) bus_space_read_4((sc)->iot, (sc)->ioh, (r))
#define OREAD2(sc, r) bus_space_read_2((sc)->iot, (sc)->ioh, (r))
/* Reverse the bits in a value 0 .. 31 */
Static u_int8_t revbits[OHCI_NO_INTRS] =
{ 0x00, 0x10, 0x08, 0x18, 0x04, 0x14, 0x0c, 0x1c,
0x02, 0x12, 0x0a, 0x1a, 0x06, 0x16, 0x0e, 0x1e,
0x01, 0x11, 0x09, 0x19, 0x05, 0x15, 0x0d, 0x1d,
0x03, 0x13, 0x0b, 0x1b, 0x07, 0x17, 0x0f, 0x1f };
struct ohci_pipe {
struct usbd_pipe pipe;
ohci_soft_ed_t *sed;
union {
ohci_soft_td_t *td;
ohci_soft_itd_t *itd;
} tail;
/* Info needed for different pipe kinds. */
union {
/* Control pipe */
struct {
usb_dma_t reqdma;
u_int length;
ohci_soft_td_t *setup, *data, *stat;
} ctl;
/* Interrupt pipe */
struct {
int nslots;
int pos;
} intr;
/* Bulk pipe */
struct {
u_int length;
int isread;
} bulk;
/* Iso pipe */
struct iso {
int next, inuse;
} iso;
} u;
};
#define OHCI_INTR_ENDPT 1
Static struct usbd_bus_methods ohci_bus_methods = {
ohci_open,
ohci_poll,
ohci_allocm,
ohci_freem,
ohci_allocx,
ohci_freex,
};
Static struct usbd_pipe_methods ohci_root_ctrl_methods = {
ohci_root_ctrl_transfer,
ohci_root_ctrl_start,
ohci_root_ctrl_abort,
ohci_root_ctrl_close,
ohci_noop,
0,
};
Static struct usbd_pipe_methods ohci_root_intr_methods = {
ohci_root_intr_transfer,
ohci_root_intr_start,
ohci_root_intr_abort,
ohci_root_intr_close,
ohci_noop,
ohci_root_intr_done,
};
Static struct usbd_pipe_methods ohci_device_ctrl_methods = {
ohci_device_ctrl_transfer,
ohci_device_ctrl_start,
ohci_device_ctrl_abort,
ohci_device_ctrl_close,
ohci_noop,
ohci_device_ctrl_done,
};
Static struct usbd_pipe_methods ohci_device_intr_methods = {
ohci_device_intr_transfer,
ohci_device_intr_start,
ohci_device_intr_abort,
ohci_device_intr_close,
ohci_device_clear_toggle,
ohci_device_intr_done,
};
Static struct usbd_pipe_methods ohci_device_bulk_methods = {
ohci_device_bulk_transfer,
ohci_device_bulk_start,
ohci_device_bulk_abort,
ohci_device_bulk_close,
ohci_device_clear_toggle,
ohci_device_bulk_done,
};
Static struct usbd_pipe_methods ohci_device_isoc_methods = {
ohci_device_isoc_transfer,
ohci_device_isoc_start,
ohci_device_isoc_abort,
ohci_device_isoc_close,
ohci_noop,
ohci_device_isoc_done,
};
#if defined(__NetBSD__) || defined(__OpenBSD__)
int
ohci_activate(self, act)
device_ptr_t self;
enum devact act;
{
struct ohci_softc *sc = (struct ohci_softc *)self;
int rv = 0;
switch (act) {
case DVACT_ACTIVATE:
return (EOPNOTSUPP);
break;
case DVACT_DEACTIVATE:
if (sc->sc_child != NULL)
rv = config_deactivate(sc->sc_child);
break;
}
return (rv);
}
int
ohci_detach(sc, flags)
struct ohci_softc *sc;
int flags;
{
int rv = 0;
if (sc->sc_child != NULL)
rv = config_detach(sc->sc_child, flags);
if (rv != 0)
return (rv);
#if defined(__NetBSD__)
powerhook_disestablish(sc->sc_powerhook);
shutdownhook_disestablish(sc->sc_shutdownhook);
#endif
/* free data structures XXX */
return (rv);
}
#endif
ohci_soft_ed_t *
ohci_alloc_sed(sc)
ohci_softc_t *sc;
{
ohci_soft_ed_t *sed;
usbd_status err;
int i, offs;
usb_dma_t dma;
if (sc->sc_freeeds == NULL) {
DPRINTFN(2, ("ohci_alloc_sed: allocating chunk\n"));
err = usb_allocmem(&sc->sc_bus, OHCI_SED_SIZE * OHCI_SED_CHUNK,
OHCI_ED_ALIGN, &dma);
if (err)
return (0);
for(i = 0; i < OHCI_SED_CHUNK; i++) {
offs = i * OHCI_SED_SIZE;
sed = (ohci_soft_ed_t *)((char *)KERNADDR(&dma, offs));
sed->physaddr = DMAADDR(&dma, offs);
sed->next = sc->sc_freeeds;
sc->sc_freeeds = sed;
}
}
sed = sc->sc_freeeds;
sc->sc_freeeds = sed->next;
memset(&sed->ed, 0, sizeof(ohci_ed_t));
sed->next = 0;
return (sed);
}
void
ohci_free_sed(sc, sed)
ohci_softc_t *sc;
ohci_soft_ed_t *sed;
{
sed->next = sc->sc_freeeds;
sc->sc_freeeds = sed;
}
ohci_soft_td_t *
ohci_alloc_std(sc)
ohci_softc_t *sc;
{
ohci_soft_td_t *std;
usbd_status err;
int i, offs;
usb_dma_t dma;
int s;
if (sc->sc_freetds == NULL) {
DPRINTFN(2, ("ohci_alloc_std: allocating chunk\n"));
err = usb_allocmem(&sc->sc_bus, OHCI_STD_SIZE * OHCI_STD_CHUNK,
OHCI_TD_ALIGN, &dma);
if (err)
return (0);
for(i = 0; i < OHCI_STD_CHUNK; i++) {
offs = i * OHCI_STD_SIZE;
std = (ohci_soft_td_t *)((char *)KERNADDR(&dma, offs));
std->physaddr = DMAADDR(&dma, offs);
std->nexttd = sc->sc_freetds;
sc->sc_freetds = std;
}
}
std = sc->sc_freetds;
sc->sc_freetds = std->nexttd;
memset(&std->td, 0, sizeof(ohci_td_t));
std->nexttd = NULL;
s = splusb();
ohci_hash_add_td(sc, std);
splx(s);
return (std);
}
void
ohci_free_std(sc, std)
ohci_softc_t *sc;
ohci_soft_td_t *std;
{
int s;
s = splusb();
ohci_hash_rem_td(sc, std);
splx(s);
std->nexttd = sc->sc_freetds;
sc->sc_freetds = std;
}
usbd_status
ohci_alloc_std_chain(opipe, sc, len, rd, flags, dma, std, rstd)
struct ohci_pipe *opipe;
ohci_softc_t *sc;
int len, rd;
u_int16_t flags;
usb_dma_t *dma;
ohci_soft_td_t *std, **rstd;
{
ohci_soft_td_t *next, *cur;
ohci_physaddr_t dataphys, dataphysend;
u_int32_t intr, tdflags;
int offset = 0;
int curlen;
DPRINTFN(len < 4096,("ohci_alloc_std_chain: start len=%d\n", len));
cur = std;
dataphysend = DMAADDR(dma, len - 1);
tdflags =
(rd ? OHCI_TD_IN : OHCI_TD_OUT) |
OHCI_TD_NOCC | OHCI_TD_TOGGLE_CARRY |
(flags & USBD_SHORT_XFER_OK ? OHCI_TD_R : 0);
for (;;) {
next = ohci_alloc_std(sc);
if (next == 0)
goto nomem;
dataphys = DMAADDR(dma, offset);
/* The OHCI hardware can handle at most one page crossing. */
#if defined(__NetBSD__) || defined(__OpenBSD__)
if (OHCI_PAGE(dataphys) == OHCI_PAGE(dataphysend) ||
OHCI_PAGE(dataphys) + OHCI_PAGE_SIZE == OHCI_PAGE(dataphysend))
#elif defined(__FreeBSD__)
/* XXX This is pretty broken: Because we do not allocate
* a contiguous buffer (contiguous in physical pages) we
* can only transfer one page in one go.
* So check whether the start and end of the buffer are on
* the same page.
*/
if (OHCI_PAGE(dataphys) == OHCI_PAGE(dataphysend))
#endif
{
/* we can handle it in this TD */
curlen = len;
} else {
/* XXX The calculation below is wrong and could
* result in a packet that is not a multiple of the
* MaxPacketSize in the case where the buffer does not
* start on an appropriate address (like for example in
* the case of an mbuf cluster). You'll get an early
* short packet.
*/
#if defined(__NetBSD__) || defined(__OpenBSD__)
/* must use multiple TDs, fill as much as possible. */
curlen = 2 * OHCI_PAGE_SIZE -
OHCI_PAGE_MASK(dataphys);
#elif defined(__FreeBSD__)
/* See comment above (XXX) */
curlen = OHCI_PAGE_SIZE -
OHCI_PAGE_MASK(dataphys);
#endif
}
DPRINTFN(4,("ohci_alloc_std_chain: dataphys=0x%08x "
"dataphysend=0x%08x len=%d curlen=%d\n",
dataphys, dataphysend,
len, curlen));
len -= curlen;
intr = len == 0 ? OHCI_TD_SET_DI(1) : OHCI_TD_NOINTR;
cur->td.td_flags = LE(tdflags | intr);
cur->td.td_cbp = LE(dataphys);
cur->nexttd = next;
cur->td.td_nexttd = LE(next->physaddr);
cur->td.td_be = LE(dataphys + curlen - 1);
cur->len = curlen;
cur->flags = OHCI_ADD_LEN;
DPRINTFN(10,("ohci_alloc_std_chain: cbp=0x%08x be=0x%08x\n",
dataphys, dataphys + curlen - 1));
if (len == 0)
break;
DPRINTFN(10,("ohci_alloc_std_chain: extend chain\n"));
offset += curlen;
cur = next;
}
if ((flags & USBD_FORCE_SHORT_XFER) &&
len % UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize) == 0) {
/* Force a 0 length transfer at the end. */
next = ohci_alloc_std(sc);
if (next == 0)
goto nomem;
cur->td.td_flags = LE(tdflags | OHCI_TD_SET_DI(1));
cur->td.td_cbp = 0; /* indicate 0 length packet */
cur->nexttd = next;
cur->td.td_nexttd = LE(next->physaddr);
cur->td.td_be = LE(dataphys - 1);
cur->len = 0;
cur->flags = 0;
cur = next;
DPRINTFN(2,("ohci_alloc_std_chain: add 0 xfer\n"));
}
cur->flags = OHCI_CALL_DONE | OHCI_ADD_LEN;
*rstd = next;
return (USBD_NORMAL_COMPLETION);
nomem:
/* XXX free chain */
return (USBD_NOMEM);
}
#if 0
Static void
ohci_free_std_chain(sc, std, stdend)
ohci_softc_t *sc;
ohci_soft_td_t *std;
ohci_soft_td_t *stdend;
{
ohci_soft_td_t *p;
for (; std != stdend; std = p) {
p = std->nexttd;
ohci_free_std(sc, std);
}
}
#endif
ohci_soft_itd_t *
ohci_alloc_sitd(sc)
ohci_softc_t *sc;
{
ohci_soft_itd_t *sitd;
usbd_status err;
int i, offs;
usb_dma_t dma;
if (sc->sc_freeitds == NULL) {
DPRINTFN(2, ("ohci_alloc_sitd: allocating chunk\n"));
err = usb_allocmem(&sc->sc_bus, OHCI_STD_SIZE * OHCI_STD_CHUNK,
OHCI_TD_ALIGN, &dma);
if (err)
return (0);
for(i = 0; i < OHCI_STD_CHUNK; i++) {
offs = i * OHCI_STD_SIZE;
sitd = (ohci_soft_itd_t *)((char*)KERNADDR(&dma, offs));
sitd->physaddr = DMAADDR(&dma, offs);
sitd->nextitd = sc->sc_freeitds;
sc->sc_freeitds = sitd;
}
}
sitd = sc->sc_freeitds;
sc->sc_freeitds = sitd->nextitd;
memset(&sitd->itd, 0, sizeof(ohci_itd_t));
sitd->nextitd = 0;
return (sitd);
}
void
ohci_free_sitd(sc, sitd)
ohci_softc_t *sc;
ohci_soft_itd_t *sitd;
{
sitd->nextitd = sc->sc_freeitds;
sc->sc_freeitds = sitd;
}
usbd_status
ohci_init(sc)
ohci_softc_t *sc;
{
ohci_soft_ed_t *sed, *psed;
usbd_status err;
int i;
u_int32_t s, ctl, ival, hcr, fm, per, rev;
DPRINTF(("ohci_init: start\n"));
#if defined(__OpenBSD__)
printf(",");
#else
printf("%s:", USBDEVNAME(sc->sc_bus.bdev));
#endif
rev = OREAD4(sc, OHCI_REVISION);
printf(" OHCI version %d.%d%s\n", OHCI_REV_HI(rev), OHCI_REV_LO(rev),
OHCI_REV_LEGACY(rev) ? ", legacy support" : "");
if (OHCI_REV_HI(rev) != 1 || OHCI_REV_LO(rev) != 0) {
printf("%s: unsupported OHCI revision\n",
USBDEVNAME(sc->sc_bus.bdev));
sc->sc_bus.usbrev = USBREV_UNKNOWN;
return (USBD_INVAL);
}
sc->sc_bus.usbrev = USBREV_1_0;
for (i = 0; i < OHCI_HASH_SIZE; i++)
LIST_INIT(&sc->sc_hash_tds[i]);
SIMPLEQ_INIT(&sc->sc_free_xfers);
/* Allocate the HCCA area. */
err = usb_allocmem(&sc->sc_bus, OHCI_HCCA_SIZE,
OHCI_HCCA_ALIGN, &sc->sc_hccadma);
if (err)
return (err);
sc->sc_hcca = (struct ohci_hcca *)KERNADDR(&sc->sc_hccadma, 0);
memset(sc->sc_hcca, 0, OHCI_HCCA_SIZE);
sc->sc_eintrs = OHCI_NORMAL_INTRS;
/* Allocate dummy ED that starts the control list. */
sc->sc_ctrl_head = ohci_alloc_sed(sc);
if (sc->sc_ctrl_head == NULL) {
err = USBD_NOMEM;
goto bad1;
}
sc->sc_ctrl_head->ed.ed_flags |= LE(OHCI_ED_SKIP);
/* Allocate dummy ED that starts the bulk list. */
sc->sc_bulk_head = ohci_alloc_sed(sc);
if (sc->sc_bulk_head == NULL) {
err = USBD_NOMEM;
goto bad2;
}
sc->sc_bulk_head->ed.ed_flags |= LE(OHCI_ED_SKIP);
/* Allocate dummy ED that starts the isochronous list. */
sc->sc_isoc_head = ohci_alloc_sed(sc);
if (sc->sc_isoc_head == NULL) {
err = USBD_NOMEM;
goto bad3;
}
sc->sc_isoc_head->ed.ed_flags |= LE(OHCI_ED_SKIP);
/* Allocate all the dummy EDs that make up the interrupt tree. */
for (i = 0; i < OHCI_NO_EDS; i++) {
sed = ohci_alloc_sed(sc);
if (sed == NULL) {
while (--i >= 0)
ohci_free_sed(sc, sc->sc_eds[i]);
err = USBD_NOMEM;
goto bad4;
}
/* All ED fields are set to 0. */
sc->sc_eds[i] = sed;
sed->ed.ed_flags |= LE(OHCI_ED_SKIP);
if (i != 0)
psed = sc->sc_eds[(i-1) / 2];
else
psed= sc->sc_isoc_head;
sed->next = psed;
sed->ed.ed_nexted = LE(psed->physaddr);
}
/*
* Fill HCCA interrupt table. The bit reversal is to get
* the tree set up properly to spread the interrupts.
*/
for (i = 0; i < OHCI_NO_INTRS; i++)
sc->sc_hcca->hcca_interrupt_table[revbits[i]] =
LE(sc->sc_eds[OHCI_NO_EDS-OHCI_NO_INTRS+i]->physaddr);
/* Determine in what context we are running. */
ctl = OREAD4(sc, OHCI_CONTROL);
if (ctl & OHCI_IR) {
/* SMM active, request change */
DPRINTF(("ohci_init: SMM active, request owner change\n"));
s = OREAD4(sc, OHCI_COMMAND_STATUS);
OWRITE4(sc, OHCI_COMMAND_STATUS, s | OHCI_OCR);
for (i = 0; i < 100 && (ctl & OHCI_IR); i++) {
usb_delay_ms(&sc->sc_bus, 1);
ctl = OREAD4(sc, OHCI_CONTROL);
}
if ((ctl & OHCI_IR) == 0) {
printf("%s: SMM does not respond, resetting\n",
USBDEVNAME(sc->sc_bus.bdev));
OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET);
goto reset;
}
} else if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_RESET) {
/* BIOS started controller. */
DPRINTF(("ohci_init: BIOS active\n"));
if ((ctl & OHCI_HCFS_MASK) != OHCI_HCFS_OPERATIONAL) {
OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_OPERATIONAL);
usb_delay_ms(&sc->sc_bus, USB_RESUME_DELAY);
}
} else {
DPRINTF(("ohci_init: cold started\n"));
reset:
/* Controller was cold started. */
usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY);
}
/*
* This reset should not be necessary according to the OHCI spec, but
* without it some controllers do not start.
*/
DPRINTF(("%s: resetting\n", USBDEVNAME(sc->sc_bus.bdev)));
OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET);
usb_delay_ms(&sc->sc_bus, USB_BUS_RESET_DELAY);
/* We now own the host controller and the bus has been reset. */
ival = OHCI_GET_IVAL(OREAD4(sc, OHCI_FM_INTERVAL));
OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_HCR); /* Reset HC */
/* Nominal time for a reset is 10 us. */
for (i = 0; i < 10; i++) {
delay(10);
hcr = OREAD4(sc, OHCI_COMMAND_STATUS) & OHCI_HCR;
if (!hcr)
break;
}
if (hcr) {
printf("%s: reset timeout\n", USBDEVNAME(sc->sc_bus.bdev));
err = USBD_IOERROR;
goto bad5;
}
#ifdef OHCI_DEBUG
if (ohcidebug > 15)
ohci_dumpregs(sc);
#endif
/* The controller is now in SUSPEND state, we have 2ms to finish. */
/* Set up HC registers. */
OWRITE4(sc, OHCI_HCCA, DMAADDR(&sc->sc_hccadma, 0));
OWRITE4(sc, OHCI_CONTROL_HEAD_ED, sc->sc_ctrl_head->physaddr);
OWRITE4(sc, OHCI_BULK_HEAD_ED, sc->sc_bulk_head->physaddr);
/* disable all interrupts and then switch on all desired interrupts */
OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS);
OWRITE4(sc, OHCI_INTERRUPT_ENABLE, sc->sc_eintrs | OHCI_MIE);
/* switch on desired functional features */
ctl = OREAD4(sc, OHCI_CONTROL);
ctl &= ~(OHCI_CBSR_MASK | OHCI_LES | OHCI_HCFS_MASK | OHCI_IR);
ctl |= OHCI_PLE | OHCI_IE | OHCI_CLE | OHCI_BLE |
OHCI_RATIO_1_4 | OHCI_HCFS_OPERATIONAL;
/* And finally start it! */
OWRITE4(sc, OHCI_CONTROL, ctl);
/*
* The controller is now OPERATIONAL. Set a some final
* registers that should be set earlier, but that the
* controller ignores when in the SUSPEND state.
*/
fm = (OREAD4(sc, OHCI_FM_INTERVAL) & OHCI_FIT) ^ OHCI_FIT;
fm |= OHCI_FSMPS(ival) | ival;
OWRITE4(sc, OHCI_FM_INTERVAL, fm);
per = OHCI_PERIODIC(ival); /* 90% periodic */
OWRITE4(sc, OHCI_PERIODIC_START, per);
OWRITE4(sc, OHCI_RH_STATUS, OHCI_LPSC); /* Enable port power */
sc->sc_noport = OHCI_GET_NDP(OREAD4(sc, OHCI_RH_DESCRIPTOR_A));
#ifdef OHCI_DEBUG
if (ohcidebug > 5)
ohci_dumpregs(sc);
#endif
/* Set up the bus struct. */
sc->sc_bus.methods = &ohci_bus_methods;
sc->sc_bus.pipe_size = sizeof(struct ohci_pipe);
#if defined(__NetBSD__)
sc->sc_powerhook = powerhook_establish(ohci_power, sc);
sc->sc_shutdownhook = shutdownhook_establish(ohci_shutdown, sc);
#endif
return (USBD_NORMAL_COMPLETION);
bad5:
for (i = 0; i < OHCI_NO_EDS; i++)
ohci_free_sed(sc, sc->sc_eds[i]);
bad4:
ohci_free_sed(sc, sc->sc_isoc_head);
bad3:
ohci_free_sed(sc, sc->sc_ctrl_head);
bad2:
ohci_free_sed(sc, sc->sc_bulk_head);
bad1:
usb_freemem(&sc->sc_bus, &sc->sc_hccadma);
return (err);
}
usbd_status
ohci_allocm(bus, dma, size)
struct usbd_bus *bus;
usb_dma_t *dma;
u_int32_t size;
{
#if defined(__NetBSD__) || defined(__OpenBSD__)
struct ohci_softc *sc = (struct ohci_softc *)bus;
#endif
return (usb_allocmem(&sc->sc_bus, size, 0, dma));
}
void
ohci_freem(bus, dma)
struct usbd_bus *bus;
usb_dma_t *dma;
{
#if defined(__NetBSD__) || defined(__OpenBSD__)
struct ohci_softc *sc = (struct ohci_softc *)bus;
#endif
usb_freemem(&sc->sc_bus, dma);
}
usbd_xfer_handle
ohci_allocx(bus)
struct usbd_bus *bus;
{
struct ohci_softc *sc = (struct ohci_softc *)bus;
usbd_xfer_handle xfer;
xfer = SIMPLEQ_FIRST(&sc->sc_free_xfers);
if (xfer != NULL)
SIMPLEQ_REMOVE_HEAD(&sc->sc_free_xfers, xfer, next);
else
xfer = malloc(sizeof(*xfer), M_USB, M_NOWAIT);
if (xfer != NULL)
memset(xfer, 0, sizeof *xfer);
return (xfer);
}
void
ohci_freex(bus, xfer)
struct usbd_bus *bus;
usbd_xfer_handle xfer;
{
struct ohci_softc *sc = (struct ohci_softc *)bus;
SIMPLEQ_INSERT_HEAD(&sc->sc_free_xfers, xfer, next);
}
/*
* Shut down the controller when the system is going down.
*/
#if defined(__NetBSD__) || defined(__OpenBSD__)
void
ohci_shutdown(v)
void *v;
{
ohci_softc_t *sc = v;
DPRINTF(("ohci_shutdown: stopping the HC\n"));
OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET);
}
/*
* Handle suspend/resume.
*
* We need to switch to polling mode here, because this routine is
* called from an intterupt context. This is all right since we
* are almost suspended anyway.
*/
void
ohci_power(why, v)
int why;
void *v;
{
#ifdef OHCI_DEBUG
ohci_softc_t *sc = v;
DPRINTF(("ohci_power: sc=%p, why=%d\n", sc, why));
/* XXX should suspend/resume */
ohci_dumpregs(sc);
#endif
}
#endif
#ifdef OHCI_DEBUG
void
ohci_dumpregs(sc)
ohci_softc_t *sc;
{
DPRINTF(("ohci_dumpregs: rev=0x%08x control=0x%08x command=0x%08x\n",
OREAD4(sc, OHCI_REVISION),
OREAD4(sc, OHCI_CONTROL),
OREAD4(sc, OHCI_COMMAND_STATUS)));
DPRINTF((" intrstat=0x%08x intre=0x%08x intrd=0x%08x\n",
OREAD4(sc, OHCI_INTERRUPT_STATUS),
OREAD4(sc, OHCI_INTERRUPT_ENABLE),
OREAD4(sc, OHCI_INTERRUPT_DISABLE)));
DPRINTF((" hcca=0x%08x percur=0x%08x ctrlhd=0x%08x\n",
OREAD4(sc, OHCI_HCCA),
OREAD4(sc, OHCI_PERIOD_CURRENT_ED),
OREAD4(sc, OHCI_CONTROL_HEAD_ED)));
DPRINTF((" ctrlcur=0x%08x bulkhd=0x%08x bulkcur=0x%08x\n",
OREAD4(sc, OHCI_CONTROL_CURRENT_ED),
OREAD4(sc, OHCI_BULK_HEAD_ED),
OREAD4(sc, OHCI_BULK_CURRENT_ED)));
DPRINTF((" done=0x%08x fmival=0x%08x fmrem=0x%08x\n",
OREAD4(sc, OHCI_DONE_HEAD),
OREAD4(sc, OHCI_FM_INTERVAL),
OREAD4(sc, OHCI_FM_REMAINING)));
DPRINTF((" fmnum=0x%08x perst=0x%08x lsthrs=0x%08x\n",
OREAD4(sc, OHCI_FM_NUMBER),
OREAD4(sc, OHCI_PERIODIC_START),
OREAD4(sc, OHCI_LS_THRESHOLD)));
DPRINTF((" desca=0x%08x descb=0x%08x stat=0x%08x\n",
OREAD4(sc, OHCI_RH_DESCRIPTOR_A),
OREAD4(sc, OHCI_RH_DESCRIPTOR_B),
OREAD4(sc, OHCI_RH_STATUS)));
DPRINTF((" port1=0x%08x port2=0x%08x\n",
OREAD4(sc, OHCI_RH_PORT_STATUS(1)),
OREAD4(sc, OHCI_RH_PORT_STATUS(2))));
DPRINTF((" HCCA: frame_number=0x%04x done_head=0x%08x\n",
LE(sc->sc_hcca->hcca_frame_number),
LE(sc->sc_hcca->hcca_done_head)));
}
#endif
Static int ohci_intr1(ohci_softc_t *);
int
ohci_intr(p)
void *p;
{
ohci_softc_t *sc = p;
/* If we get an interrupt while polling, then just ignore it. */
if (sc->sc_bus.use_polling) {
#ifdef DIAGNOSTIC
printf("ohci_intr: ignored interrupt while polling\n");
#endif
return (0);
}
return (ohci_intr1(sc));
}
Static int
ohci_intr1(sc)
ohci_softc_t *sc;
{
u_int32_t intrs, eintrs;
ohci_physaddr_t done;
/* In case the interrupt occurs before initialization has completed. */
if (sc == NULL || sc->sc_hcca == NULL) {
#ifdef DIAGNOSTIC
printf("ohci_intr: sc->sc_hcca == NULL\n");
#endif
return (0);
}
intrs = 0;
done = LE(sc->sc_hcca->hcca_done_head);
/* The LSb of done is used to inform the HC Driver that an interrupt
* condition exists for both the Done list and for another event
* recorded in HcInterruptStatus. On an interrupt from the HC, the HC
* Driver checks the HccaDoneHead Value. If this value is 0, then the
* interrupt was caused by other than the HccaDoneHead update and the
* HcInterruptStatus register needs to be accessed to determine that
* exact interrupt cause. If HccaDoneHead is nonzero, then a Done list
* update interrupt is indicated and if the LSb of done is nonzero,
* then an additional interrupt event is indicated and
* HcInterruptStatus should be checked to determine its cause.
*/
if (done != 0) {
sc->sc_hcca->hcca_done_head = 0;
if (done & ~OHCI_DONE_INTRS)
intrs = OHCI_WDH;
if (done & OHCI_DONE_INTRS) {
intrs |= OREAD4(sc, OHCI_INTERRUPT_STATUS);
done &= ~OHCI_DONE_INTRS;
}
} else {
intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS);
}
if (intrs == 0) /* nothing to be done (PCI shared interrupt) */
return (0);
intrs &= ~OHCI_MIE; /* mask out Master Interrupt Enable */
/* Acknowledge any interrupts that have happened */
OWRITE4(sc, OHCI_INTERRUPT_STATUS, intrs);
/* Any interrupts we had enabled? */
eintrs = intrs & sc->sc_eintrs;
if (!eintrs)
return (0);
sc->sc_bus.intr_context++;
sc->sc_bus.no_intrs++;
DPRINTFN(7, ("ohci_intr: sc=%p intrs=%x(%x) eintr=%x\n",
sc, (u_int)intrs, OREAD4(sc, OHCI_INTERRUPT_STATUS),
(u_int)eintrs));
if (eintrs & OHCI_SO) {
printf("%s: scheduling overrun\n",USBDEVNAME(sc->sc_bus.bdev));
/* XXX do what */
intrs &= ~OHCI_SO;
}
if (eintrs & OHCI_WDH) {
ohci_process_done(sc, done);
intrs &= ~OHCI_WDH;
}
if (eintrs & OHCI_RD) {
printf("%s: resume detect\n", USBDEVNAME(sc->sc_bus.bdev));
/* XXX process resume detect */
}
if (eintrs & OHCI_UE) {
printf("%s: unrecoverable error, controller halted\n",
USBDEVNAME(sc->sc_bus.bdev));
OWRITE4(sc, OHCI_CONTROL, OHCI_HCFS_RESET);
/* XXX what else */
}
if (eintrs & OHCI_RHSC) {
ohci_rhsc(sc, sc->sc_intrxfer);
intrs &= ~OHCI_RHSC;
/*
* Disable RHSC interrupt for now, because it will be
* on until the port has been reset.
*/
ohci_rhsc_able(sc, 0);
}
sc->sc_bus.intr_context--;
/* Block unprocessed interrupts. XXX */
OWRITE4(sc, OHCI_INTERRUPT_DISABLE, intrs);
sc->sc_eintrs &= ~intrs;
return (1);
}
void
ohci_rhsc_able(sc, on)
ohci_softc_t *sc;
int on;
{
DPRINTFN(4, ("ohci_rhsc_able: on=%d\n", on));
if (on) {
sc->sc_eintrs |= OHCI_RHSC;
OWRITE4(sc, OHCI_INTERRUPT_ENABLE, OHCI_RHSC);
} else {
sc->sc_eintrs &= ~OHCI_RHSC;
OWRITE4(sc, OHCI_INTERRUPT_DISABLE, OHCI_RHSC);
}
}
#ifdef OHCI_DEBUG
char *ohci_cc_strs[] = {
"NO_ERROR",
"CRC",
"BIT_STUFFING",
"DATA_TOGGLE_MISMATCH",
"STALL",
"DEVICE_NOT_RESPONDING",
"PID_CHECK_FAILURE",
"UNEXPECTED_PID",
"DATA_OVERRUN",
"DATA_UNDERRUN",
"BUFFER_OVERRUN",
"BUFFER_UNDERRUN",
"reserved",
"reserved",
"NOT_ACCESSED",
"NOT_ACCESSED"
};
#endif
void
ohci_process_done(sc, done)
ohci_softc_t *sc;
ohci_physaddr_t done;
{
ohci_soft_td_t *std, *sdone, *stdnext;
usbd_xfer_handle xfer;
int len, cc;
DPRINTFN(10,("ohci_process_done: done=0x%08lx\n", (u_long)done));
/* Reverse the done list and store the reversed list in sdone */
sdone = NULL;
for (; done; done = LE(std->td.td_nexttd)) {
std = ohci_hash_find_td(sc, done & LE(OHCI_TAILMASK));
if (std == NULL) {
#ifdef OHCI_DEBUG
DPRINTF(("%s: Invalid done queue 0x%08x",
USBDEVNAME(sc->sc_bus.bdev), done));
ohci_dumpregs(sc);
#endif
/* XXX Should we compare the list of active TDs with
* the list of TDs queued at EDs to handle the ones that
* are not listed on any of the ED queues and therefore
* must be finished?
*/
return;
}
std->dnext = sdone;
sdone = std;
}
#ifdef OHCI_DEBUG
if (ohcidebug > 10) {
DPRINTF(("ohci_process_done: TD done:\n"));
for (std = sdone; std; std = std->dnext)
ohci_dump_td(sdone);
}
#endif
for (std = sdone; std; std = stdnext) {
xfer = std->xfer;
stdnext = std->dnext;
DPRINTFN(5, ("ohci_process_done: std=%p xfer=%p hcpriv=%p\n",
std, xfer, (xfer? xfer->hcpriv:NULL)));
if (xfer == NULL || (std->flags & OHCI_TD_HANDLED)) {
/* xfer == NULL: There seems to be no xfer associated
* with this TD. It is tailp that happened to end up on
* the done queue.
* flags & OHCI_TD_HANDLED: The TD has already been
* handled by process_done and should not be done again.
*/
continue;
}
cc = OHCI_TD_GET_CC(LE(std->td.td_flags));
usb_untimeout(ohci_timeout, xfer, xfer->timo_handle);
if (xfer->status == USBD_CANCELLED ||
xfer->status == USBD_TIMEOUT) {
DPRINTF(("ohci_process_done: cancel/timeout, xfer=%p\n",
xfer));
/* Handled by abort routine. */
} else if (cc == OHCI_CC_NO_ERROR) {
DPRINTFN(15, ("ohci_process_done: no error, xfer=%p\n",
xfer));
len = std->len;
if (std->td.td_cbp != 0)
len -= LE(std->td.td_be) -
LE(std->td.td_cbp) + 1;
if (std->flags & OHCI_ADD_LEN)
xfer->actlen += len;
if (std->flags & OHCI_CALL_DONE) {
xfer->status = USBD_NORMAL_COMPLETION;
usb_transfer_complete(xfer);
}
ohci_free_std(sc, std);
} else {
/*
* Endpoint is halted. First unlink all the TDs
* belonging to the failed transfer, and then restart
* the endpoint.
*/
ohci_soft_td_t *p, *n;
struct ohci_pipe *opipe =
(struct ohci_pipe *)xfer->pipe;
DPRINTF(("ohci_process_done: err cc=%d (%s), xfer=%p\n",
OHCI_TD_GET_CC(LE(std->td.td_flags)),
ohci_cc_strs[OHCI_TD_GET_CC(LE(std->td.td_flags))],
xfer));
/* Mark all the TDs in the done queue for the current
* xfer as handled
*/
for (p = stdnext; p; p = p->dnext) {
if (p->xfer == xfer)
p->flags |= OHCI_TD_HANDLED;
}
/* remove TDs for the current xfer from the ED */
for (p = std; p->xfer == xfer; p = n) {
n = p->nexttd;
ohci_free_std(sc, p);
}
opipe->sed->ed.ed_headp = LE(p->physaddr);
/* XXX why is this being done? Why not OHCI_BLF too */
OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF);
if (cc == OHCI_CC_STALL)
xfer->status = USBD_STALLED;
else
xfer->status = USBD_IOERROR;
usb_transfer_complete(xfer);
}
}
}
void
ohci_device_ctrl_done(xfer)
usbd_xfer_handle xfer;
{
DPRINTFN(10,("ohci_ctrl_done: xfer=%p\n", xfer));
#ifdef DIAGNOSTIC
if (!(xfer->rqflags & URQ_REQUEST)) {
panic("ohci_ctrl_done: not a request\n");
}
#endif
xfer->hcpriv = NULL;
}
void
ohci_device_intr_done(xfer)
usbd_xfer_handle xfer;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe;
ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus;
ohci_soft_ed_t *sed = opipe->sed;
ohci_soft_td_t *data, *tail;
DPRINTFN(10,("ohci_intr_done: xfer=%p, actlen=%d\n",
xfer, xfer->actlen));
xfer->hcpriv = NULL;
if (xfer->pipe->repeat) {
data = opipe->tail.td;
tail = ohci_alloc_std(sc); /* XXX should reuse TD */
if (tail == NULL) {
xfer->status = USBD_NOMEM;
return;
}
tail->xfer = NULL;
data->td.td_flags = LE(
OHCI_TD_IN | OHCI_TD_NOCC |
OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY);
if (xfer->flags & USBD_SHORT_XFER_OK)
data->td.td_flags |= LE(OHCI_TD_R);
data->td.td_cbp = LE(DMAADDR(&xfer->dmabuf, 0));
data->nexttd = tail;
data->td.td_nexttd = LE(tail->physaddr);
data->td.td_be = LE(LE(data->td.td_cbp) + xfer->length - 1);
data->len = xfer->length;
data->xfer = xfer;
data->flags = OHCI_CALL_DONE | OHCI_ADD_LEN;
xfer->hcpriv = data;
xfer->actlen = 0;
ohci_hash_add_td(sc, data);
sed->ed.ed_tailp = LE(tail->physaddr);
opipe->tail.td = tail;
}
}
void
ohci_device_bulk_done(xfer)
usbd_xfer_handle xfer;
{
DPRINTFN(10,("ohci_bulk_done: xfer=%p, actlen=%d\n",
xfer, xfer->actlen));
xfer->hcpriv = NULL;
}
void
ohci_rhsc(sc, xfer)
ohci_softc_t *sc;
usbd_xfer_handle xfer;
{
usbd_pipe_handle pipe;
struct ohci_pipe *opipe;
u_char *p;
int i, m;
int hstatus;
hstatus = OREAD4(sc, OHCI_RH_STATUS);
DPRINTF(("ohci_rhsc: sc=%p xfer=%p hstatus=0x%08x\n",
sc, xfer, hstatus));
if (xfer == NULL) {
/* Just ignore the change. */
return;
}
pipe = xfer->pipe;
opipe = (struct ohci_pipe *)pipe;
p = KERNADDR(&xfer->dmabuf, 0);
m = min(sc->sc_noport, xfer->length * 8 - 1);
memset(p, 0, xfer->length);
for (i = 1; i <= m; i++) {
if (OREAD4(sc, OHCI_RH_PORT_STATUS(i)) >> 16)
p[i/8] |= 1 << (i%8);
}
DPRINTF(("ohci_rhsc: change=0x%02x\n", *p));
xfer->actlen = xfer->length;
xfer->status = USBD_NORMAL_COMPLETION;
usb_transfer_complete(xfer);
}
void
ohci_root_intr_done(xfer)
usbd_xfer_handle xfer;
{
xfer->hcpriv = NULL;
}
/*
* Wait here until controller claims to have an interrupt.
* Then call ohci_intr and return. Use timeout to avoid waiting
* too long.
*/
void
ohci_waitintr(sc, xfer)
ohci_softc_t *sc;
usbd_xfer_handle xfer;
{
int timo = xfer->timeout;
int usecs;
u_int32_t intrs;
xfer->status = USBD_IN_PROGRESS;
for (usecs = timo * 1000000 / hz; usecs > 0; usecs -= 1000) {
usb_delay_ms(&sc->sc_bus, 1);
intrs = OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs;
DPRINTFN(15,("ohci_waitintr: 0x%04x\n", intrs));
#ifdef OHCI_DEBUG
if (ohcidebug > 15)
ohci_dumpregs(sc);
#endif
if (intrs) {
ohci_intr1(sc);
if (xfer->status != USBD_IN_PROGRESS)
return;
}
}
/* Timeout */
DPRINTF(("ohci_waitintr: timeout\n"));
#ifdef OHCI_DEBUG
ohci_dumpregs(sc);
#endif
xfer->status = USBD_TIMEOUT;
usb_transfer_complete(xfer);
/* XXX should free TD */
}
void
ohci_poll(bus)
struct usbd_bus *bus;
{
ohci_softc_t *sc = (ohci_softc_t *)bus;
if (OREAD4(sc, OHCI_INTERRUPT_STATUS) & sc->sc_eintrs)
ohci_intr1(sc);
}
usbd_status
ohci_device_request(xfer)
usbd_xfer_handle xfer;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe;
usb_device_request_t *req = &xfer->request;
usbd_device_handle dev = opipe->pipe.device;
ohci_softc_t *sc = (ohci_softc_t *)dev->bus;
int addr = dev->address;
ohci_soft_td_t *setup, *data = 0, *stat, *next, *tail;
ohci_soft_ed_t *sed;
int isread;
int len;
usbd_status err;
int s;
isread = req->bmRequestType & UT_READ;
len = UGETW(req->wLength);
DPRINTFN(3,("ohci_device_control type=0x%02x, request=0x%02x, "
"wValue=0x%04x, wIndex=0x%04x len=%d, addr=%d, endpt=%d\n",
req->bmRequestType, req->bRequest, UGETW(req->wValue),
UGETW(req->wIndex), len, addr,
opipe->pipe.endpoint->edesc->bEndpointAddress));
setup = opipe->tail.td;
stat = ohci_alloc_std(sc);
if (stat == NULL) {
err = USBD_NOMEM;
goto bad1;
}
tail = ohci_alloc_std(sc);
if (tail == NULL) {
err = USBD_NOMEM;
goto bad2;
}
tail->xfer = NULL;
sed = opipe->sed;
opipe->u.ctl.length = len;
/* Update device address and length since they may have changed. */
/* XXX This only needs to be done once, but it's too early in open. */
sed->ed.ed_flags = LE(
(LE(sed->ed.ed_flags) & ~(OHCI_ED_ADDRMASK | OHCI_ED_MAXPMASK)) |
OHCI_ED_SET_FA(addr) |
OHCI_ED_SET_MAXP(UGETW(opipe->pipe.endpoint->edesc->wMaxPacketSize)));
/* Set up data transaction */
if (len != 0) {
data = ohci_alloc_std(sc);
if (data == NULL) {
err = USBD_NOMEM;
goto bad3;
}
data->td.td_flags = LE(
(isread ? OHCI_TD_IN : OHCI_TD_OUT) | OHCI_TD_NOCC |
OHCI_TD_TOGGLE_1 | OHCI_TD_NOINTR |
(xfer->flags & USBD_SHORT_XFER_OK ? OHCI_TD_R : 0));
data->td.td_cbp = LE(DMAADDR(&xfer->dmabuf, 0));
data->nexttd = stat;
data->td.td_nexttd = LE(stat->physaddr);
data->td.td_be = LE(LE(data->td.td_cbp) + len - 1);
data->len = len;
data->xfer = xfer;
data->flags = OHCI_ADD_LEN;
next = data;
stat->flags = OHCI_CALL_DONE;
} else {
next = stat;
/* XXX ADD_LEN? */
stat->flags = OHCI_CALL_DONE | OHCI_ADD_LEN;
}
memcpy(KERNADDR(&opipe->u.ctl.reqdma, 0), req, sizeof *req);
setup->td.td_flags = LE(OHCI_TD_SETUP | OHCI_TD_NOCC |
OHCI_TD_TOGGLE_0 | OHCI_TD_NOINTR);
setup->td.td_cbp = LE(DMAADDR(&opipe->u.ctl.reqdma, 0));
setup->nexttd = next;
setup->td.td_nexttd = LE(next->physaddr);
setup->td.td_be = LE(LE(setup->td.td_cbp) + sizeof *req - 1);
setup->len = 0; /* XXX The number of byte we count */
setup->xfer = xfer;
setup->flags = 0;
xfer->hcpriv = setup;
stat->td.td_flags = LE(
(isread ? OHCI_TD_OUT : OHCI_TD_IN) | OHCI_TD_NOCC |
OHCI_TD_TOGGLE_1 | OHCI_TD_SET_DI(1));
stat->td.td_cbp = 0;
stat->nexttd = tail;
stat->td.td_nexttd = LE(tail->physaddr);
stat->td.td_be = 0;
stat->len = 0;
stat->xfer = xfer;
#ifdef OHCI_DEBUG
if (ohcidebug > 5) {
DPRINTF(("ohci_device_request:\n"));
ohci_dump_ed(sed);
ohci_dump_tds(setup);
}
#endif
/* Insert ED in schedule */
s = splusb();
sed->ed.ed_tailp = LE(tail->physaddr);
opipe->tail.td = tail;
OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_CLF);
if (xfer->timeout && !sc->sc_bus.use_polling) {
usb_timeout(ohci_timeout, xfer,
MS_TO_TICKS(xfer->timeout), xfer->timo_handle);
}
splx(s);
#ifdef OHCI_DEBUG
if (ohcidebug > 25) {
usb_delay_ms(&sc->sc_bus, 5);
DPRINTF(("ohci_device_request: status=%x\n",
OREAD4(sc, OHCI_COMMAND_STATUS)));
ohci_dump_ed(sed);
ohci_dump_tds(setup);
}
#endif
return (USBD_NORMAL_COMPLETION);
bad3:
ohci_free_std(sc, tail);
bad2:
ohci_free_std(sc, stat);
bad1:
return (err);
}
/*
* Add an ED to the schedule. Called at splusb().
*/
void
ohci_add_ed(sed, head)
ohci_soft_ed_t *sed;
ohci_soft_ed_t *head;
{
SPLUSBCHECK;
sed->next = head->next;
sed->ed.ed_nexted = head->ed.ed_nexted;
head->next = sed;
head->ed.ed_nexted = LE(sed->physaddr);
}
/*
* Remove an ED from the schedule. Called at splusb().
*/
void
ohci_rem_ed(sed, head)
ohci_soft_ed_t *sed;
ohci_soft_ed_t *head;
{
ohci_soft_ed_t *p;
SPLUSBCHECK;
/* XXX */
for (p = head; p == NULL && p->next != sed; p = p->next)
;
if (p == NULL)
panic("ohci_rem_ed: ED not found\n");
p->next = sed->next;
p->ed.ed_nexted = sed->ed.ed_nexted;
}
/*
* When a transfer is completed the TD is added to the done queue by
* the host controller. This queue is the processed by software.
* Unfortunately the queue contains the physical address of the TD
* and we have no simple way to translate this back to a kernel address.
* To make the translation possible (and fast) we use a hash table of
* TDs currently in the schedule. The physical address is used as the
* hash value.
*/
#define HASH(a) (((a) >> 4) % OHCI_HASH_SIZE)
/* Called at splusb() */
void
ohci_hash_add_td(sc, std)
ohci_softc_t *sc;
ohci_soft_td_t *std;
{
int h = HASH(std->physaddr);
SPLUSBCHECK;
LIST_INSERT_HEAD(&sc->sc_hash_tds[h], std, hnext);
}
/* Called at splusb() */
void
ohci_hash_rem_td(sc, std)
ohci_softc_t *sc;
ohci_soft_td_t *std;
{
SPLUSBCHECK;
LIST_REMOVE(std, hnext);
}
ohci_soft_td_t *
ohci_hash_find_td(sc, a)
ohci_softc_t *sc;
ohci_physaddr_t a;
{
int h = HASH(a);
ohci_soft_td_t *std;
/* if these are present they should be masked out at an earlier
* stage.
*/
KASSERT((a&~OHCI_TAILMASK) == 0, ("%s: 0x%b has lower bits set\n",
USBDEVNAME(sc->sc_bus.bdev),
(int) a, "\20\1HALT\2TOGGLE"));
for (std = LIST_FIRST(&sc->sc_hash_tds[h]);
std != NULL;
std = LIST_NEXT(std, hnext))
if (std->physaddr == a)
return (std);
DPRINTF(("%s: ohci_hash_find_td: addr 0x%08lx not found\n",
USBDEVNAME(sc->sc_bus.bdev), (u_long) a));
return NULL;
}
void
ohci_timeout(addr)
void *addr;
{
usbd_xfer_handle xfer = addr;
int s;
DPRINTF(("ohci_timeout: xfer=%p\n", xfer));
s = splusb();
xfer->device->bus->intr_context++;
ohci_abort_xfer(xfer, USBD_TIMEOUT);
xfer->device->bus->intr_context--;
splx(s);
}
#ifdef OHCI_DEBUG
void
ohci_dump_tds(std)
ohci_soft_td_t *std;
{
for (; std; std = std->nexttd)
ohci_dump_td(std);
}
void
ohci_dump_td(std)
ohci_soft_td_t *std;
{
DPRINTF(("TD(%p) at %08lx: %b delay=%d ec=%d cc=%d\ncbp=0x%08lx "
"nexttd=0x%08lx be=0x%08lx\n",
std, (u_long)std->physaddr,
(int)LE(std->td.td_flags),
"\20\23R\24OUT\25IN\31TOG1\32SETTOGGLE",
OHCI_TD_GET_DI(LE(std->td.td_flags)),
OHCI_TD_GET_EC(LE(std->td.td_flags)),
OHCI_TD_GET_CC(LE(std->td.td_flags)),
(u_long)LE(std->td.td_cbp),
(u_long)LE(std->td.td_nexttd), (u_long)LE(std->td.td_be)));
}
void
ohci_dump_ed(sed)
ohci_soft_ed_t *sed;
{
DPRINTF(("ED(%p) at %08lx: addr=%d endpt=%d maxp=%d %b\n"
"tailp=0x%8b headp=0x%8b nexted=0x%08lx\n",
sed, (u_long)sed->physaddr,
OHCI_ED_GET_FA(LE(sed->ed.ed_flags)),
OHCI_ED_GET_EN(LE(sed->ed.ed_flags)),
OHCI_ED_GET_MAXP(LE(sed->ed.ed_flags)),
(int)LE(sed->ed.ed_flags),
"\20\14OUT\15IN\16LOWSPEED\17SKIP\20ISO",
(int)(uintptr_t)LE(sed->ed.ed_tailp),
"\20\1BIT1\2BIT2",
(int)(uintptr_t)LE(sed->ed.ed_headp),
"\20\1HALT\2CARRY",
(u_long)LE(sed->ed.ed_nexted)));
}
#endif
usbd_status
ohci_open(pipe)
usbd_pipe_handle pipe;
{
usbd_device_handle dev = pipe->device;
ohci_softc_t *sc = (ohci_softc_t *)dev->bus;
usb_endpoint_descriptor_t *ed = pipe->endpoint->edesc;
struct ohci_pipe *opipe = (struct ohci_pipe *)pipe;
u_int8_t addr = dev->address;
u_int8_t xfertype = ed->bmAttributes & UE_XFERTYPE;
ohci_soft_ed_t *sed;
ohci_soft_td_t *std = NULL;
ohci_soft_itd_t *sitd;
ohci_physaddr_t tdphys;
u_int32_t fmt;
usbd_status err;
int s;
int ival;
DPRINTFN(1, ("ohci_open: pipe=%p, addr=%d, endpt=%d (%d)\n",
pipe, addr, ed->bEndpointAddress, sc->sc_addr));
if (addr == sc->sc_addr) {
switch (ed->bEndpointAddress) {
case USB_CONTROL_ENDPOINT:
pipe->methods = &ohci_root_ctrl_methods;
break;
case UE_DIR_IN | OHCI_INTR_ENDPT:
pipe->methods = &ohci_root_intr_methods;
break;
default:
return (USBD_INVAL);
}
} else {
sed = ohci_alloc_sed(sc);
if (sed == NULL)
goto bad0;
opipe->sed = sed;
if (xfertype == UE_ISOCHRONOUS) {
sitd = ohci_alloc_sitd(sc);
if (sitd == NULL) {
ohci_free_sitd(sc, sitd);
goto bad1;
}
opipe->tail.itd = sitd;
tdphys = LE(sitd->physaddr);
fmt = OHCI_ED_FORMAT_ISO;
} else {
std = ohci_alloc_std(sc);
if (std == NULL) {
ohci_free_std(sc, std);
goto bad1;
}
opipe->tail.td = std;
tdphys = LE(std->physaddr);
fmt = OHCI_ED_FORMAT_GEN;
}
sed->ed.ed_flags = LE(
OHCI_ED_SET_FA(addr) |
OHCI_ED_SET_EN(ed->bEndpointAddress) |
OHCI_ED_DIR_TD |
(dev->lowspeed ? OHCI_ED_SPEED : 0) | fmt |
OHCI_ED_SET_MAXP(UGETW(ed->wMaxPacketSize)));
sed->ed.ed_headp = sed->ed.ed_tailp = tdphys;
switch (xfertype) {
case UE_CONTROL:
pipe->methods = &ohci_device_ctrl_methods;
err = usb_allocmem(&sc->sc_bus,
sizeof(usb_device_request_t),
0, &opipe->u.ctl.reqdma);
if (err)
goto bad;
s = splusb();
ohci_add_ed(sed, sc->sc_ctrl_head);
splx(s);
break;
case UE_INTERRUPT:
pipe->methods = &ohci_device_intr_methods;
ival = pipe->interval;
if (ival == USBD_DEFAULT_INTERVAL)
ival = ed->bInterval;
return (ohci_device_setintr(sc, opipe, ival));
case UE_ISOCHRONOUS:
pipe->methods = &ohci_device_isoc_methods;
return (ohci_setup_isoc(pipe));
case UE_BULK:
pipe->methods = &ohci_device_bulk_methods;
s = splusb();
ohci_add_ed(sed, sc->sc_bulk_head);
splx(s);
break;
}
}
return (USBD_NORMAL_COMPLETION);
bad:
ohci_free_std(sc, std);
bad1:
ohci_free_sed(sc, sed);
bad0:
return (USBD_NOMEM);
}
/*
* Close a reqular pipe.
* Assumes that there are no pending transactions.
*/
void
ohci_close_pipe(pipe, head)
usbd_pipe_handle pipe;
ohci_soft_ed_t *head;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)pipe;
ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus;
ohci_soft_ed_t *sed = opipe->sed;
int s;
s = splusb();
#ifdef DIAGNOSTIC
sed->ed.ed_flags |= LE(OHCI_ED_SKIP);
if ((sed->ed.ed_tailp & LE(OHCI_TAILMASK))
!= (sed->ed.ed_headp & LE(OHCI_HEADMASK))) {
ohci_physaddr_t td = sed->ed.ed_headp;
ohci_soft_td_t *std;
for (std = LIST_FIRST(&sc->sc_hash_tds[HASH(td)]);
std != NULL;
std = LIST_NEXT(std, hnext))
if (std->physaddr == td)
break;
printf("ohci_close_pipe: pipe not empty sed=%p hd=0x%x "
"tl=0x%x pipe=%p, std=%p\n", sed,
(int)LE(sed->ed.ed_headp), (int)LE(sed->ed.ed_tailp),
pipe, std);
usb_delay_ms(&sc->sc_bus, 2);
if ((sed->ed.ed_tailp & LE(OHCI_TAILMASK))
!= (sed->ed.ed_headp & LE(OHCI_HEADMASK)))
printf("ohci_close_pipe: pipe still not empty\n");
}
#endif
ohci_rem_ed(sed, head);
splx(s);
ohci_free_sed(sc, opipe->sed);
}
/*
* Abort a device request.
* If this routine is called at splusb() it guarantees that the request
* will be removed from the hardware scheduling and that the callback
* for it will be called with USBD_CANCELLED status.
* It's impossible to guarantee that the requested transfer will not
* have happened since the hardware runs concurrently.
* If the transaction has already happened we rely on the ordinary
* interrupt processing to process it.
*/
void
ohci_abort_xfer(xfer, status)
usbd_xfer_handle xfer;
usbd_status status;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe;
ohci_soft_ed_t *sed;
DPRINTF(("ohci_abort_xfer: xfer=%p pipe=%p\n", xfer, opipe));
xfer->status = status;
usb_untimeout(ohci_timeout, xfer, xfer->timo_handle);
sed = opipe->sed;
sed->ed.ed_flags |= LE(OHCI_ED_SKIP); /* force hardware skip */
#ifdef OHCI_DEBUG
DPRINTFN(1,("ohci_abort_xfer: stop ed=%p\n", sed));
ohci_dump_ed(sed);
#endif
#if 1
if (xfer->device->bus->intr_context) {
/* We have no process context, so we can't use tsleep(). */
timeout(ohci_abort_xfer_end, xfer, hz / USB_FRAMES_PER_SECOND);
} else {
#if defined(DIAGNOSTIC) && defined(__i386__) && defined(__FreeBSD__)
KASSERT(curthread->td_intr_nesting_level == 0,
("ohci_abort_req in interrupt context"));
#endif
usb_delay_ms(opipe->pipe.device->bus, 1);
ohci_abort_xfer_end(xfer);
}
#else
delay(1000);
ohci_abort_xfer_end(xfer);
#endif
}
void
ohci_abort_xfer_end(v)
void *v;
{
usbd_xfer_handle xfer = v;
struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe;
ohci_softc_t *sc = (ohci_softc_t *)opipe->pipe.device->bus;
ohci_soft_ed_t *sed;
ohci_soft_td_t *p, *n;
int s;
s = splusb();
p = xfer->hcpriv;
#ifdef DIAGNOSTIC
if (p == NULL) {
printf("ohci_abort_xfer: hcpriv==0\n");
splx(s);
return;
}
#endif
for (; p->xfer == xfer; p = n) {
n = p->nexttd;
ohci_free_std(sc, p);
}
sed = opipe->sed;
DPRINTFN(2,("ohci_abort_xfer: set hd=%x, tl=%x\n",
(int)LE(p->physaddr), (int)LE(sed->ed.ed_tailp)));
sed->ed.ed_headp = p->physaddr; /* unlink TDs */
sed->ed.ed_flags &= LE(~OHCI_ED_SKIP); /* remove hardware skip */
usb_transfer_complete(xfer);
splx(s);
}
/*
* Data structures and routines to emulate the root hub.
*/
Static usb_device_descriptor_t ohci_devd = {
USB_DEVICE_DESCRIPTOR_SIZE,
UDESC_DEVICE, /* type */
{0x00, 0x01}, /* USB version */
UCLASS_HUB, /* class */
USUBCLASS_HUB, /* subclass */
0, /* protocol */
64, /* max packet */
{0},{0},{0x00,0x01}, /* device id */
1,2,0, /* string indicies */
1 /* # of configurations */
};
Static usb_config_descriptor_t ohci_confd = {
USB_CONFIG_DESCRIPTOR_SIZE,
UDESC_CONFIG,
{USB_CONFIG_DESCRIPTOR_SIZE +
USB_INTERFACE_DESCRIPTOR_SIZE +
USB_ENDPOINT_DESCRIPTOR_SIZE},
1,
1,
0,
UC_SELF_POWERED,
0 /* max power */
};
Static usb_interface_descriptor_t ohci_ifcd = {
USB_INTERFACE_DESCRIPTOR_SIZE,
UDESC_INTERFACE,
0,
0,
1,
UCLASS_HUB,
USUBCLASS_HUB,
0,
0
};
Static usb_endpoint_descriptor_t ohci_endpd = {
USB_ENDPOINT_DESCRIPTOR_SIZE,
UDESC_ENDPOINT,
UE_DIR_IN | OHCI_INTR_ENDPT,
UE_INTERRUPT,
{8, 0}, /* max packet */
255
};
Static usb_hub_descriptor_t ohci_hubd = {
USB_HUB_DESCRIPTOR_SIZE,
UDESC_HUB,
0,
{0,0},
0,
0,
{0},
};
Static int
ohci_str(p, l, s)
usb_string_descriptor_t *p;
int l;
const char *s;
{
int i;
if (l == 0)
return (0);
p->bLength = 2 * strlen(s) + 2;
if (l == 1)
return (1);
p->bDescriptorType = UDESC_STRING;
l -= 2;
for (i = 0; s[i] && l > 1; i++, l -= 2)
USETW2(p->bString[i], 0, s[i]);
return (2*i+2);
}
/*
* Simulate a hardware hub by handling all the necessary requests.
*/
Static usbd_status
ohci_root_ctrl_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running, start first */
return (ohci_root_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
Static usbd_status
ohci_root_ctrl_start(xfer)
usbd_xfer_handle xfer;
{
ohci_softc_t *sc = (ohci_softc_t *)xfer->pipe->device->bus;
usb_device_request_t *req;
void *buf = NULL;
int port, i;
int s, len, value, index, l, totlen = 0;
usb_port_status_t ps;
usb_hub_descriptor_t hubd;
usbd_status err;
u_int32_t v;
#ifdef DIAGNOSTIC
if (!(xfer->rqflags & URQ_REQUEST))
/* XXX panic */
return (USBD_INVAL);
#endif
req = &xfer->request;
DPRINTFN(4,("ohci_root_ctrl_control type=0x%02x request=%02x\n",
req->bmRequestType, req->bRequest));
len = UGETW(req->wLength);
value = UGETW(req->wValue);
index = UGETW(req->wIndex);
if (len != 0)
buf = KERNADDR(&xfer->dmabuf, 0);
#define C(x,y) ((x) | ((y) << 8))
switch(C(req->bRequest, req->bmRequestType)) {
case C(UR_CLEAR_FEATURE, UT_WRITE_DEVICE):
case C(UR_CLEAR_FEATURE, UT_WRITE_INTERFACE):
case C(UR_CLEAR_FEATURE, UT_WRITE_ENDPOINT):
/*
* DEVICE_REMOTE_WAKEUP and ENDPOINT_HALT are no-ops
* for the integrated root hub.
*/
break;
case C(UR_GET_CONFIG, UT_READ_DEVICE):
if (len > 0) {
*(u_int8_t *)buf = sc->sc_conf;
totlen = 1;
}
break;
case C(UR_GET_DESCRIPTOR, UT_READ_DEVICE):
DPRINTFN(8,("ohci_root_ctrl_control wValue=0x%04x\n", value));
switch(value >> 8) {
case UDESC_DEVICE:
if ((value & 0xff) != 0) {
err = USBD_IOERROR;
goto ret;
}
totlen = l = min(len, USB_DEVICE_DESCRIPTOR_SIZE);
USETW(ohci_devd.idVendor, sc->sc_id_vendor);
memcpy(buf, &ohci_devd, l);
break;
case UDESC_CONFIG:
if ((value & 0xff) != 0) {
err = USBD_IOERROR;
goto ret;
}
totlen = l = min(len, USB_CONFIG_DESCRIPTOR_SIZE);
memcpy(buf, &ohci_confd, l);
buf = (char *)buf + l;
len -= l;
l = min(len, USB_INTERFACE_DESCRIPTOR_SIZE);
totlen += l;
memcpy(buf, &ohci_ifcd, l);
buf = (char *)buf + l;
len -= l;
l = min(len, USB_ENDPOINT_DESCRIPTOR_SIZE);
totlen += l;
memcpy(buf, &ohci_endpd, l);
break;
case UDESC_STRING:
if (len == 0)
break;
*(u_int8_t *)buf = 0;
totlen = 1;
switch (value & 0xff) {
case 1: /* Vendor */
totlen = ohci_str(buf, len, sc->sc_vendor);
break;
case 2: /* Product */
totlen = ohci_str(buf, len, "OHCI root hub");
break;
}
break;
default:
err = USBD_IOERROR;
goto ret;
}
break;
case C(UR_GET_INTERFACE, UT_READ_INTERFACE):
if (len > 0) {
*(u_int8_t *)buf = 0;
totlen = 1;
}
break;
case C(UR_GET_STATUS, UT_READ_DEVICE):
if (len > 1) {
USETW(((usb_status_t *)buf)->wStatus,UDS_SELF_POWERED);
totlen = 2;
}
break;
case C(UR_GET_STATUS, UT_READ_INTERFACE):
case C(UR_GET_STATUS, UT_READ_ENDPOINT):
if (len > 1) {
USETW(((usb_status_t *)buf)->wStatus, 0);
totlen = 2;
}
break;
case C(UR_SET_ADDRESS, UT_WRITE_DEVICE):
if (value >= USB_MAX_DEVICES) {
err = USBD_IOERROR;
goto ret;
}
sc->sc_addr = value;
break;
case C(UR_SET_CONFIG, UT_WRITE_DEVICE):
if (value != 0 && value != 1) {
err = USBD_IOERROR;
goto ret;
}
sc->sc_conf = value;
break;
case C(UR_SET_DESCRIPTOR, UT_WRITE_DEVICE):
break;
case C(UR_SET_FEATURE, UT_WRITE_DEVICE):
case C(UR_SET_FEATURE, UT_WRITE_INTERFACE):
case C(UR_SET_FEATURE, UT_WRITE_ENDPOINT):
err = USBD_IOERROR;
goto ret;
case C(UR_SET_INTERFACE, UT_WRITE_INTERFACE):
break;
case C(UR_SYNCH_FRAME, UT_WRITE_ENDPOINT):
break;
/* Hub requests */
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_DEVICE):
break;
case C(UR_CLEAR_FEATURE, UT_WRITE_CLASS_OTHER):
DPRINTFN(8, ("ohci_root_ctrl_control: UR_CLEAR_PORT_FEATURE "
"port=%d feature=%d\n",
index, value));
if (index < 1 || index > sc->sc_noport) {
err = USBD_IOERROR;
goto ret;
}
port = OHCI_RH_PORT_STATUS(index);
switch(value) {
case UHF_PORT_ENABLE:
OWRITE4(sc, port, UPS_CURRENT_CONNECT_STATUS);
break;
case UHF_PORT_SUSPEND:
OWRITE4(sc, port, UPS_OVERCURRENT_INDICATOR);
break;
case UHF_PORT_POWER:
OWRITE4(sc, port, UPS_LOW_SPEED);
break;
case UHF_C_PORT_CONNECTION:
OWRITE4(sc, port, UPS_C_CONNECT_STATUS << 16);
break;
case UHF_C_PORT_ENABLE:
OWRITE4(sc, port, UPS_C_PORT_ENABLED << 16);
break;
case UHF_C_PORT_SUSPEND:
OWRITE4(sc, port, UPS_C_SUSPEND << 16);
break;
case UHF_C_PORT_OVER_CURRENT:
OWRITE4(sc, port, UPS_C_OVERCURRENT_INDICATOR << 16);
break;
case UHF_C_PORT_RESET:
OWRITE4(sc, port, UPS_C_PORT_RESET << 16);
break;
default:
err = USBD_IOERROR;
goto ret;
}
switch(value) {
case UHF_C_PORT_CONNECTION:
case UHF_C_PORT_ENABLE:
case UHF_C_PORT_SUSPEND:
case UHF_C_PORT_OVER_CURRENT:
case UHF_C_PORT_RESET:
/* Enable RHSC interrupt if condition is cleared. */
if ((OREAD4(sc, port) >> 16) == 0)
ohci_rhsc_able(sc, 1);
break;
default:
break;
}
break;
case C(UR_GET_DESCRIPTOR, UT_READ_CLASS_DEVICE):
if (value != 0) {
err = USBD_IOERROR;
goto ret;
}
v = OREAD4(sc, OHCI_RH_DESCRIPTOR_A);
hubd = ohci_hubd;
hubd.bNbrPorts = sc->sc_noport;
USETW(hubd.wHubCharacteristics,
(v & OHCI_NPS ? UHD_PWR_NO_SWITCH :
v & OHCI_PSM ? UHD_PWR_GANGED : UHD_PWR_INDIVIDUAL)
/* XXX overcurrent */
);
hubd.bPwrOn2PwrGood = OHCI_GET_POTPGT(v);
v = OREAD4(sc, OHCI_RH_DESCRIPTOR_B);
for (i = 0, l = sc->sc_noport; l > 0; i++, l -= 8, v >>= 8)
hubd.DeviceRemovable[i++] = (u_int8_t)v;
hubd.bDescLength = USB_HUB_DESCRIPTOR_SIZE + i;
l = min(len, hubd.bDescLength);
totlen = l;
memcpy(buf, &hubd, l);
break;
case C(UR_GET_STATUS, UT_READ_CLASS_DEVICE):
if (len != 4) {
err = USBD_IOERROR;
goto ret;
}
memset(buf, 0, len); /* ? XXX */
totlen = len;
break;
case C(UR_GET_STATUS, UT_READ_CLASS_OTHER):
DPRINTFN(8,("ohci_root_ctrl_transfer: get port status i=%d\n",
index));
if (index < 1 || index > sc->sc_noport) {
err = USBD_IOERROR;
goto ret;
}
if (len != 4) {
err = USBD_IOERROR;
goto ret;
}
v = OREAD4(sc, OHCI_RH_PORT_STATUS(index));
DPRINTFN(8,("ohci_root_ctrl_transfer: port status=0x%04x\n",
v));
USETW(ps.wPortStatus, v);
USETW(ps.wPortChange, v >> 16);
l = min(len, sizeof ps);
memcpy(buf, &ps, l);
totlen = l;
break;
case C(UR_SET_DESCRIPTOR, UT_WRITE_CLASS_DEVICE):
err = USBD_IOERROR;
goto ret;
case C(UR_SET_FEATURE, UT_WRITE_CLASS_DEVICE):
break;
case C(UR_SET_FEATURE, UT_WRITE_CLASS_OTHER):
if (index < 1 || index > sc->sc_noport) {
err = USBD_IOERROR;
goto ret;
}
port = OHCI_RH_PORT_STATUS(index);
switch(value) {
case UHF_PORT_ENABLE:
OWRITE4(sc, port, UPS_PORT_ENABLED);
break;
case UHF_PORT_SUSPEND:
OWRITE4(sc, port, UPS_SUSPEND);
break;
case UHF_PORT_RESET:
DPRINTFN(5,("ohci_root_ctrl_transfer: reset port %d\n",
index));
OWRITE4(sc, port, UPS_RESET);
for (i = 0; i < 10; i++) {
usb_delay_ms(&sc->sc_bus, 10);
if ((OREAD4(sc, port) & UPS_RESET) == 0)
break;
}
DPRINTFN(8,("ohci port %d reset, status = 0x%04x\n",
index, OREAD4(sc, port)));
break;
case UHF_PORT_POWER:
DPRINTFN(2,("ohci_root_ctrl_transfer: set port power "
"%d\n", index));
OWRITE4(sc, port, UPS_PORT_POWER);
break;
default:
err = USBD_IOERROR;
goto ret;
}
break;
default:
err = USBD_IOERROR;
goto ret;
}
xfer->actlen = totlen;
err = USBD_NORMAL_COMPLETION;
ret:
xfer->status = err;
s = splusb();
usb_transfer_complete(xfer);
splx(s);
return (USBD_IN_PROGRESS);
}
/* Abort a root control request. */
Static void
ohci_root_ctrl_abort(xfer)
usbd_xfer_handle xfer;
{
/* Nothing to do, all transfers are synchronous. */
}
/* Close the root pipe. */
Static void
ohci_root_ctrl_close(pipe)
usbd_pipe_handle pipe;
{
DPRINTF(("ohci_root_ctrl_close\n"));
/* Nothing to do. */
}
Static usbd_status
ohci_root_intr_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running, start first */
return (ohci_root_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
Static usbd_status
ohci_root_intr_start(xfer)
usbd_xfer_handle xfer;
{
usbd_pipe_handle pipe = xfer->pipe;
ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus;
sc->sc_intrxfer = xfer;
return (USBD_IN_PROGRESS);
}
/* Abort a root interrupt request. */
Static void
ohci_root_intr_abort(xfer)
usbd_xfer_handle xfer;
{
int s;
if (xfer->pipe->intrxfer == xfer) {
DPRINTF(("ohci_root_intr_abort: remove\n"));
xfer->pipe->intrxfer = NULL;
}
xfer->status = USBD_CANCELLED;
s = splusb();
usb_transfer_complete(xfer);
splx(s);
}
/* Close the root pipe. */
Static void
ohci_root_intr_close(pipe)
usbd_pipe_handle pipe;
{
ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus;
DPRINTF(("ohci_root_intr_close\n"));
sc->sc_intrxfer = NULL;
}
/************************/
Static usbd_status
ohci_device_ctrl_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running, start first */
return (ohci_device_ctrl_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
Static usbd_status
ohci_device_ctrl_start(xfer)
usbd_xfer_handle xfer;
{
ohci_softc_t *sc = (ohci_softc_t *)xfer->pipe->device->bus;
usbd_status err;
#ifdef DIAGNOSTIC
if (!(xfer->rqflags & URQ_REQUEST)) {
/* XXX panic */
printf("ohci_device_ctrl_transfer: not a request\n");
return (USBD_INVAL);
}
#endif
err = ohci_device_request(xfer);
if (err)
return (err);
if (sc->sc_bus.use_polling)
ohci_waitintr(sc, xfer);
return (USBD_IN_PROGRESS);
}
/* Abort a device control request. */
Static void
ohci_device_ctrl_abort(xfer)
usbd_xfer_handle xfer;
{
DPRINTF(("ohci_device_ctrl_abort: xfer=%p\n", xfer));
ohci_abort_xfer(xfer, USBD_CANCELLED);
}
/* Close a device control pipe. */
Static void
ohci_device_ctrl_close(pipe)
usbd_pipe_handle pipe;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)pipe;
ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus;
DPRINTF(("ohci_device_ctrl_close: pipe=%p\n", pipe));
ohci_close_pipe(pipe, sc->sc_ctrl_head);
ohci_free_std(sc, opipe->tail.td);
}
/************************/
Static void
ohci_device_clear_toggle(pipe)
usbd_pipe_handle pipe;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)pipe;
opipe->sed->ed.ed_headp &= LE(~OHCI_TOGGLECARRY);
}
Static void
ohci_noop(pipe)
usbd_pipe_handle pipe;
{
}
Static usbd_status
ohci_device_bulk_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running, start first */
return (ohci_device_bulk_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
Static usbd_status
ohci_device_bulk_start(xfer)
usbd_xfer_handle xfer;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe;
usbd_device_handle dev = opipe->pipe.device;
ohci_softc_t *sc = (ohci_softc_t *)dev->bus;
int addr = dev->address;
ohci_soft_td_t *data, *tail, *tdp;
ohci_soft_ed_t *sed;
int s, len, isread, endpt;
usbd_status err;
#ifdef DIAGNOSTIC
if (xfer->rqflags & URQ_REQUEST) {
/* XXX panic */
printf("ohci_device_bulk_start: a request\n");
return (USBD_INVAL);
}
#endif
len = xfer->length;
endpt = xfer->pipe->endpoint->edesc->bEndpointAddress;
isread = UE_GET_DIR(endpt) == UE_DIR_IN;
sed = opipe->sed;
DPRINTFN(4,("ohci_device_bulk_start: xfer=%p len=%d isread=%d "
"flags=%d endpt=%d\n", xfer, len, isread, xfer->flags,
endpt));
opipe->u.bulk.isread = isread;
opipe->u.bulk.length = len;
/* Update device address */
sed->ed.ed_flags = LE(
(LE(sed->ed.ed_flags) & ~OHCI_ED_ADDRMASK) |
OHCI_ED_SET_FA(addr));
/* Allocate a chain of new TDs (including a new tail). */
data = opipe->tail.td;
err = ohci_alloc_std_chain(opipe, sc, len, isread, xfer->flags,
&xfer->dmabuf, data, &tail);
if (err)
return (err);
tail->xfer = NULL;
xfer->hcpriv = data;
DPRINTFN(4,("ohci_device_bulk_start: ed_flags=0x%08x td_flags=0x%08x "
"td_cbp=0x%08x td_be=0x%08x\n",
(int)LE(sed->ed.ed_flags), (int)LE(data->td.td_flags),
(int)LE(data->td.td_cbp), (int)LE(data->td.td_be)));
#ifdef OHCI_DEBUG
if (ohcidebug > 4) {
ohci_dump_ed(sed);
ohci_dump_tds(data);
}
#endif
/* Insert ED in schedule */
s = splusb();
for (tdp = data; tdp != tail; tdp = tdp->nexttd) {
tdp->xfer = xfer;
ohci_hash_add_td(sc, tdp);
}
sed->ed.ed_tailp = LE(tail->physaddr);
opipe->tail.td = tail;
sed->ed.ed_flags &= LE(~OHCI_ED_SKIP);
OWRITE4(sc, OHCI_COMMAND_STATUS, OHCI_BLF);
if (xfer->timeout && !sc->sc_bus.use_polling) {
usb_timeout(ohci_timeout, xfer,
MS_TO_TICKS(xfer->timeout), xfer->timo_handle);
}
#if 0
/* This goes wrong if we are too slow. */
if (ohcidebug > 5) {
usb_delay_ms(&sc->sc_bus, 5);
DPRINTF(("ohci_device_intr_transfer: status=%x\n",
OREAD4(sc, OHCI_COMMAND_STATUS)));
ohci_dump_ed(sed);
ohci_dump_tds(data);
}
#endif
splx(s);
return (USBD_IN_PROGRESS);
}
Static void
ohci_device_bulk_abort(xfer)
usbd_xfer_handle xfer;
{
DPRINTF(("ohci_device_bulk_abort: xfer=%p\n", xfer));
ohci_abort_xfer(xfer, USBD_CANCELLED);
}
/*
* Close a device bulk pipe.
*/
Static void
ohci_device_bulk_close(pipe)
usbd_pipe_handle pipe;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)pipe;
ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus;
DPRINTF(("ohci_device_bulk_close: pipe=%p\n", pipe));
ohci_close_pipe(pipe, sc->sc_bulk_head);
ohci_free_std(sc, opipe->tail.td);
}
/************************/
Static usbd_status
ohci_device_intr_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
/* Insert last in queue. */
err = usb_insert_transfer(xfer);
if (err)
return (err);
/* Pipe isn't running, start first */
return (ohci_device_intr_start(SIMPLEQ_FIRST(&xfer->pipe->queue)));
}
Static usbd_status
ohci_device_intr_start(xfer)
usbd_xfer_handle xfer;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe;
usbd_device_handle dev = opipe->pipe.device;
ohci_softc_t *sc = (ohci_softc_t *)dev->bus;
ohci_soft_ed_t *sed = opipe->sed;
ohci_soft_td_t *data, *tail;
int len;
int s;
DPRINTFN(3, ("ohci_device_intr_transfer: xfer=%p len=%d "
"flags=%d priv=%p\n",
xfer, xfer->length, xfer->flags, xfer->priv));
#ifdef DIAGNOSTIC
if (xfer->rqflags & URQ_REQUEST)
panic("ohci_device_intr_transfer: a request\n");
#endif
len = xfer->length;
data = opipe->tail.td;
tail = ohci_alloc_std(sc);
if (tail == NULL)
return (USBD_NOMEM);
tail->xfer = NULL;
data->td.td_flags = LE(
OHCI_TD_IN | OHCI_TD_NOCC |
OHCI_TD_SET_DI(1) | OHCI_TD_TOGGLE_CARRY);
if (xfer->flags & USBD_SHORT_XFER_OK)
data->td.td_flags |= LE(OHCI_TD_R);
data->td.td_cbp = LE(DMAADDR(&xfer->dmabuf, 0));
data->nexttd = tail;
data->td.td_nexttd = LE(tail->physaddr);
data->td.td_be = LE(LE(data->td.td_cbp) + len - 1);
data->len = len;
data->xfer = xfer;
data->flags = OHCI_CALL_DONE | OHCI_ADD_LEN;
xfer->hcpriv = data;
#ifdef OHCI_DEBUG
if (ohcidebug > 5) {
DPRINTF(("ohci_device_intr_transfer:\n"));
ohci_dump_ed(sed);
ohci_dump_tds(data);
}
#endif
/* Insert ED in schedule */
s = splusb();
ohci_hash_add_td(sc, data);
sed->ed.ed_tailp = LE(tail->physaddr);
opipe->tail.td = tail;
sed->ed.ed_flags &= LE(~OHCI_ED_SKIP);
#if 0
/*
* This goes horribly wrong, printing thousands of descriptors,
* because false references are followed due to the fact that the
* TD is gone.
*/
if (ohcidebug > 5) {
usb_delay_ms(&sc->sc_bus, 5);
DPRINTF(("ohci_device_intr_transfer: status=%x\n",
OREAD4(sc, OHCI_COMMAND_STATUS)));
ohci_dump_ed(sed);
ohci_dump_tds(data);
}
#endif
splx(s);
return (USBD_IN_PROGRESS);
}
/* Abort a device control request. */
Static void
ohci_device_intr_abort(xfer)
usbd_xfer_handle xfer;
{
if (xfer->pipe->intrxfer == xfer) {
DPRINTF(("ohci_device_intr_abort: remove\n"));
xfer->pipe->intrxfer = NULL;
}
ohci_abort_xfer(xfer, USBD_CANCELLED);
}
/* Close a device interrupt pipe. */
Static void
ohci_device_intr_close(pipe)
usbd_pipe_handle pipe;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)pipe;
ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus;
int nslots = opipe->u.intr.nslots;
int pos = opipe->u.intr.pos;
int j;
ohci_soft_ed_t *p, *sed = opipe->sed;
int s;
DPRINTFN(1,("ohci_device_intr_close: pipe=%p nslots=%d pos=%d\n",
pipe, nslots, pos));
s = splusb();
sed->ed.ed_flags |= LE(OHCI_ED_SKIP);
if ((sed->ed.ed_tailp & LE(OHCI_TAILMASK))
!= (sed->ed.ed_headp & LE(OHCI_HEADMASK)))
usb_delay_ms(&sc->sc_bus, 2);
#ifdef DIAGNOSTIC
if ((sed->ed.ed_tailp & LE(OHCI_TAILMASK))
!= (sed->ed.ed_headp & LE(OHCI_HEADMASK)))
panic("%s: Intr pipe %p still has TDs queued\n",
USBDEVNAME(sc->sc_bus.bdev), pipe);
#endif
for (p = sc->sc_eds[pos]; p && p->next != sed; p = p->next)
;
#ifdef DIAGNOSTIC
if (p == NULL)
panic("ohci_device_intr_close: ED not found\n");
#endif
p->next = sed->next;
p->ed.ed_nexted = sed->ed.ed_nexted;
splx(s);
for (j = 0; j < nslots; j++)
--sc->sc_bws[(pos * nslots + j) % OHCI_NO_INTRS];
ohci_free_std(sc, opipe->tail.td);
ohci_free_sed(sc, opipe->sed);
}
Static usbd_status
ohci_device_setintr(sc, opipe, ival)
ohci_softc_t *sc;
struct ohci_pipe *opipe;
int ival;
{
int i, j, s, best;
u_int npoll, slow, shigh, nslots;
u_int bestbw, bw;
ohci_soft_ed_t *hsed, *sed = opipe->sed;
DPRINTFN(2, ("ohci_setintr: pipe=%p\n", opipe));
if (ival == 0) {
printf("ohci_setintr: 0 interval\n");
return (USBD_INVAL);
}
npoll = OHCI_NO_INTRS;
while (npoll > ival)
npoll /= 2;
DPRINTFN(2, ("ohci_setintr: ival=%d npoll=%d\n", ival, npoll));
/*
* We now know which level in the tree the ED must go into.
* Figure out which slot has most bandwidth left over.
* Slots to examine:
* npoll
* 1 0
* 2 1 2
* 4 3 4 5 6
* 8 7 8 9 10 11 12 13 14
* N (N-1) .. (N-1+N-1)
*/
slow = npoll-1;
shigh = slow + npoll;
nslots = OHCI_NO_INTRS / npoll;
for (best = i = slow, bestbw = ~0; i < shigh; i++) {
bw = 0;
for (j = 0; j < nslots; j++)
bw += sc->sc_bws[(i * nslots + j) % OHCI_NO_INTRS];
if (bw < bestbw) {
best = i;
bestbw = bw;
}
}
DPRINTFN(2, ("ohci_setintr: best=%d(%d..%d) bestbw=%d\n",
best, slow, shigh, bestbw));
s = splusb();
hsed = sc->sc_eds[best];
sed->next = hsed->next;
sed->ed.ed_nexted = hsed->ed.ed_nexted;
hsed->next = sed;
hsed->ed.ed_nexted = LE(sed->physaddr);
splx(s);
for (j = 0; j < nslots; j++)
++sc->sc_bws[(best * nslots + j) % OHCI_NO_INTRS];
opipe->u.intr.nslots = nslots;
opipe->u.intr.pos = best;
DPRINTFN(5, ("ohci_setintr: returns %p\n", opipe));
return (USBD_NORMAL_COMPLETION);
}
/***********************/
usbd_status
ohci_device_isoc_transfer(xfer)
usbd_xfer_handle xfer;
{
usbd_status err;
DPRINTFN(5,("ohci_device_isoc_transfer: xfer=%p\n", xfer));
/* Put it on our queue, */
err = usb_insert_transfer(xfer);
/* bail out on error, */
if (err && err != USBD_IN_PROGRESS)
return (err);
/* XXX should check inuse here */
/* insert into schedule, */
ohci_device_isoc_enter(xfer);
/* and put on interrupt list if the pipe wasn't running */
if (!err)
ohci_device_isoc_start(SIMPLEQ_FIRST(&xfer->pipe->queue));
return (err);
}
void
ohci_device_isoc_enter(xfer)
usbd_xfer_handle xfer;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)xfer->pipe;
usbd_device_handle dev = opipe->pipe.device;
ohci_softc_t *sc = (ohci_softc_t *)dev->bus;
ohci_soft_ed_t *sed = opipe->sed;
struct iso *iso = &opipe->u.iso;
ohci_soft_itd_t *sitd, *nsitd;
ohci_physaddr_t buf, offs;
int i, ncur, nframes;
int ncross = 0;
int s;
s = splusb();
sitd = opipe->tail.itd;
buf = DMAADDR(&xfer->dmabuf, 0);
sitd->itd.itd_bp0 = LE(buf & OHCI_ITD_PAGE_MASK);
nframes = xfer->nframes;
offs = buf & OHCI_ITD_OFFSET_MASK;
for (i = ncur = 0; i < nframes; i++, ncur++) {
if (ncur == OHCI_ITD_NOFFSET || /* all offsets used */
ncross > 1) { /* too many page crossings */
nsitd = ohci_alloc_sitd(sc);
if (nsitd == NULL) {
/* XXX what now? */
splx(s);
return;
}
sitd->nextitd = nsitd;
sitd->itd.itd_nextitd = LE(nsitd->physaddr);
sitd->itd.itd_flags = LE(
OHCI_ITD_NOCC |
OHCI_ITD_SET_SF(iso->next) |
OHCI_ITD_NOINTR |
OHCI_ITD_SET_FC(OHCI_ITD_NOFFSET));
sitd->itd.itd_be = LE(LE(sitd->itd.itd_bp0) + offs - 1);
nsitd->itd.itd_bp0 = LE((buf + offs) & OHCI_ITD_PAGE_MASK);
sitd = nsitd;
iso->next = iso->next + ncur;
ncur = 0;
ncross = 0;
}
/* XXX byte order */
sitd->itd.itd_offset[i] =
offs | (ncross == 1 ? OHCI_ITD_PAGE_SELECT : 0);
offs += xfer->frlengths[i];
/* XXX update ncross */
}
nsitd = ohci_alloc_sitd(sc);
if (nsitd == NULL) {
/* XXX what now? */
splx(s);
return;
}
sitd->nextitd = nsitd;
sitd->itd.itd_nextitd = LE(nsitd->physaddr);
sitd->itd.itd_flags = LE(
OHCI_ITD_NOCC |
OHCI_ITD_SET_SF(iso->next) |
OHCI_ITD_SET_DI(0) |
OHCI_ITD_SET_FC(ncur));
sitd->itd.itd_be = LE(LE(sitd->itd.itd_bp0) + offs - 1);
iso->next = iso->next + ncur;
opipe->tail.itd = nsitd;
sed->ed.ed_tailp = LE(nsitd->physaddr);
/* XXX update ED */
splx(s);
}
usbd_status
ohci_device_isoc_start(xfer)
usbd_xfer_handle xfer;
{
printf("ohci_device_isoc_start: not implemented\n");
return (USBD_INVAL);
}
void
ohci_device_isoc_abort(xfer)
usbd_xfer_handle xfer;
{
}
void
ohci_device_isoc_done(xfer)
usbd_xfer_handle xfer;
{
printf("ohci_device_isoc_done: not implemented\n");
}
usbd_status
ohci_setup_isoc(pipe)
usbd_pipe_handle pipe;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)pipe;
struct iso *iso = &opipe->u.iso;
iso->next = -1;
iso->inuse = 0;
return (USBD_NORMAL_COMPLETION);
}
void
ohci_device_isoc_close(pipe)
usbd_pipe_handle pipe;
{
struct ohci_pipe *opipe = (struct ohci_pipe *)pipe;
ohci_softc_t *sc = (ohci_softc_t *)pipe->device->bus;
DPRINTF(("ohci_device_isoc_close: pipe=%p\n", pipe));
ohci_close_pipe(pipe, sc->sc_isoc_head);
ohci_free_sitd(sc, opipe->tail.itd);
}
Reference in New Issue View Git Blame Copy Permalink