Andrey V. Elsukov b4e63e2d15 In the same way fix the problem described in r291578 for IGMPv3. ... In case when router has a lot of multicast groups, the reply can take several packets due to MTU limitation. Also we have a limit IGMP_MAX_RESPONSE_BURST == 4, that limits the number of packets we send in one shot. Then we recalculate the timer value and schedule the remaining packets for sending. The problem is that when we call igmp_v3_dispatch_general_query() to send remaining packets, we queue new reply in the same mbuf queue. And when number of packets is bigger than IGMP_MAX_RESPONSE_BURST, we get endless reply of IGMPv3 reports. To fix this, add the check for remaining packets in the queue. MFC after: 1 week Sponsored by: Yandex LLC		2015-12-01 11:24:30 +00:00
..
cc
khelp
libalias
accf_data.c
accf_dns.c
accf_http.c
cc.h
icmp6.h
icmp_var.h
if_atm.c
if_atm.h
if_ether.c	Decompose arp_ifinit() into arp_add_ifa_lle() and arp_announce_ifaddr().	2015-11-09 10:35:33 +00:00
if_ether.h	Decompose arp_ifinit() into arp_add_ifa_lle() and arp_announce_ifaddr().	2015-11-09 10:35:33 +00:00
igmp_var.h
igmp.c	In the same way fix the problem described in r291578 for IGMPv3.	2015-12-01 11:24:30 +00:00
igmp.h
in_cksum.c
in_debug.c
in_gif.c
in_kdtrace.c	dd DTrace probe points, translators and a corresponding script	2015-09-13 15:50:55 +00:00
in_kdtrace.h	dd DTrace probe points, translators and a corresponding script	2015-09-13 15:50:55 +00:00
in_mcast.c	in_getmulti: Fix recursion on if_addr_lock on malloc failure	2015-11-18 23:53:13 +00:00
in_pcb.c	The r241129 description was wrong that the scenario is possible	2015-11-25 14:45:43 +00:00
in_pcb.h	Use Jenkins hash for TCP syncache.	2015-09-05 10:15:19 +00:00
in_pcbgroup.c
in_proto.c
in_rmx.c	Remove in_setifarnh definition.	2015-11-30 06:02:35 +00:00
in_rss.c	Rename rss_soft_m2cpuid() -> rss_soft_m2cpuid_v4() in preparation for	2015-08-29 06:58:30 +00:00
in_rss.h	Rename rss_soft_m2cpuid() -> rss_soft_m2cpuid_v4() in preparation for	2015-08-29 06:58:30 +00:00
in_systm.h
in_var.h	Replace the fastforward path with tryforward which does not require a	2015-11-05 07:26:32 +00:00
in.c	This fixes several places where callout_stops return is examined. The	2015-11-13 22:51:35 +00:00
in.h
ip6.h
ip_carp.c	Revert r290403	2015-11-13 23:14:39 +00:00
ip_carp.h
ip_divert.c
ip_divert.h
ip_dummynet.h
ip_ecn.c
ip_ecn.h
ip_encap.c
ip_encap.h
ip_fastfwd.c	Replace the fastforward path with tryforward which does not require a	2015-11-05 07:26:32 +00:00
ip_fw.h	Implement ipfw internal olist command to list named objects.	2015-11-03 10:21:53 +00:00
ip_gre.c
ip_icmp.c
ip_icmp.h
ip_id.c
ip_input.c	Overhaul if_enc(4) and make it loadable in run-time.	2015-11-25 07:31:59 +00:00
ip_ipsec.c	Set the proper direction to check for policies in this one case.	2015-10-29 21:26:32 +00:00
ip_ipsec.h
ip_mroute.c
ip_mroute.h
ip_options.c
ip_options.h
ip_output.c
ip_reass.c
ip_var.h
ip.h
pim_var.h
pim.h
raw_ip.c
sctp_asconf.c
sctp_asconf.h
sctp_auth.c	Use __func__ instead of __FUNCTION__.	2015-10-19 11:17:54 +00:00
sctp_auth.h
sctp_bsd_addr.c
sctp_bsd_addr.h
sctp_cc_functions.c
sctp_constants.h	Ensure that ERROR chunks are always padded by implementing this	2015-09-11 13:54:33 +00:00
sctp_crc32.c
sctp_crc32.h
sctp_dtrace_declare.h
sctp_dtrace_define.h
sctp_header.h	Cleanup the handling of error causes for ERROR chunks. This fixes	2015-09-12 17:08:51 +00:00
sctp_indata.c	Use the correct length. The wrong one was too large.	2015-11-06 22:08:05 +00:00
sctp_indata.h
sctp_input.c	When processing a cookie, any mismatch in port numbers or the vtag results	2015-10-26 21:19:49 +00:00
sctp_input.h
sctp_lock_bsd.h
sctp_os_bsd.h
sctp_os.h
sctp_output.c	Take also the send queue and sent queue into account when triggering	2015-11-27 22:11:46 +00:00
sctp_output.h
sctp_pcb.c	Fix the handling of IPSec policies in the SCTP stack. At least	2015-11-21 18:21:16 +00:00
sctp_pcb.h
sctp_peeloff.c
sctp_peeloff.h
sctp_ss_functions.c
sctp_structs.h
sctp_syscalls.c
sctp_sysctl.c	Fix the exporting of SCTP association states to userland. Without this,	2015-08-29 09:14:32 +00:00
sctp_sysctl.h	Remove redundant 'man page'	2015-09-15 21:16:45 +00:00
sctp_timer.c	Fix the timeout for INIT retransmissions in the case where RTO_MIN is	2015-10-13 18:27:55 +00:00
sctp_timer.h
sctp_uio.h	The field sinfo_timetolive should have been sinfo_pr_value.	2015-11-06 14:00:26 +00:00
sctp_usrreq.c	When the sending of an SCTP outgoing stream reset request fails,	2015-11-26 23:12:41 +00:00
sctp_var.h
sctp.h	Cleanup the handling of error causes for ERROR chunks. This fixes	2015-09-12 17:08:51 +00:00
sctputil.c	When receiving an SCTP/UDP packet and the interface performed	2015-11-26 09:25:20 +00:00
sctputil.h	Fix the exporting of SCTP association states to userland. Without this,	2015-08-29 09:14:32 +00:00
siftr.c
tcp_debug.c
tcp_debug.h
tcp_fsm.h
tcp_hostcache.c
tcp_hostcache.h
tcp_input.c	Improve the sysctl node name.	2015-11-05 02:09:48 +00:00
tcp_lro.c
tcp_lro.h
tcp_offload.c
tcp_offload.h
tcp_output.c	There are times when it would be really nice to have a record of the last few	2015-10-14 00:35:37 +00:00
tcp_pcap.c	Hopefully also unbreak VIMAGE kernels replacing the &V_... with	2015-10-15 01:44:32 +00:00
tcp_pcap.h	There are times when it would be really nice to have a record of the last few	2015-10-14 00:35:37 +00:00
tcp_reass.c	Eliminate nd6_nud_hint() and its TCP bindings.	2015-09-27 05:29:34 +00:00
tcp_sack.c	Calculate the correct amount of bytes that are in-flight for a connection as	2015-10-28 22:57:51 +00:00
tcp_seq.h
tcp_subr.c	Turning on IPSEC used to introduce a slight amount of performance	2015-10-27 00:42:15 +00:00
tcp_syncache.c	Use Jenkins hash for TCP syncache.	2015-09-05 10:15:19 +00:00
tcp_syncache.h	Use Jenkins hash for TCP syncache.	2015-09-05 10:15:19 +00:00
tcp_timer.c	This fixes several places where callout_stops return is examined. The	2015-11-13 22:51:35 +00:00
tcp_timer.h	Put r284245 back in place: If at first this fix was seen as a temporary	2015-08-30 13:44:39 +00:00
tcp_timewait.c
tcp_usrreq.c	There are times when it would be really nice to have a record of the last few	2015-10-14 00:35:37 +00:00
tcp_var.h	Calculate the correct amount of bytes that are in-flight for a connection as	2015-10-28 22:57:51 +00:00
tcp.h	There are times when it would be really nice to have a record of the last few	2015-10-14 00:35:37 +00:00
tcpip.h
toecore.c	Replace toe_nd6_resolve() with nd6_resolve().	2015-09-22 19:05:44 +00:00
toecore.h
udp_usrreq.c	get_inpcbinfo() and get_pcblist() are UDP local functions and	2015-08-27 15:27:41 +00:00
udp_var.h	get_inpcbinfo() and get_pcblist() are UDP local functions and	2015-08-27 15:27:41 +00:00
udp.h
udplite.h