mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-29 12:03:03 +00:00
Code Issues Releases Activity
b56fdd903a
freebsd/sys/i386/isa/if_ep.c
Garrett Wollman 2f86936a07 Finished device configuration database work for all ISA devices (except `ze') 
and all SCSI devices (except that it's not done quite the way I want).  New
information added includes:

-	A text description of the device
-	A ``state''---unknown, unconfigured, idle, or busy
-	A generic parent device (with support in the m.i. code)
-	An interrupt mask type field (which will hopefully go away) so that
.	  ``doconfig'' can be written

This requires a new version of the `lsdev' program as well (next commit).
1994-10-23 21:28:03 +00:00

1185 lines
29 KiB
C
Raw Blame History

/*
* Copyright (c) 1993 Herb Peyerl <hpeyerl@novatel.ca>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* From: if_ep.c,v 1.9 1994/01/25 10:46:29 deraadt Exp
* $Id: if_ep.c,v 1.13 1994/09/16 13:33:41 davidg Exp $
*/
#include "ep.h"
#if NEP > 0
#include "bpfilter.h"
#include <sys/param.h>
#if defined(__FreeBSD__)
#include <sys/systm.h>
#include <sys/kernel.h>
#endif
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/ioctl.h>
#include <sys/errno.h>
#include <sys/syslog.h>
#include <sys/devconf.h>
#if defined(__NetBSD__)
#include <sys/select.h>
#endif
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/if_ether.h>
#endif
#ifdef NS
#include <netns/ns.h>
#include <netns/ns_if.h>
#endif
#if NBPFILTER > 0
#include <net/bpf.h>
#include <net/bpfdesc.h>
#endif
#include <i386/isa/isa.h>
#include <i386/isa/isa_device.h>
#include <i386/isa/icu.h>
#include <i386/isa/if_epreg.h>
#include <i386/isa/elink.h>
/* For backwards compatibility */
#ifndef IFF_ALTPHYS
#define IFF_ALTPHYS IFF_LINK0
#endif
#define ETHER_MIN_LEN 64
#define ETHER_MAX_LEN 1518
#define ETHER_ADDR_LEN 6
/*
* Ethernet software status per interface.
*/
struct ep_softc {
struct arpcom arpcom; /* Ethernet common part */
ushort ep_iobase; /* i/o bus address */
char ep_connectors; /* Connectors on this card. */
#define MAX_MBS 8 /* # of mbufs we keep around */
struct mbuf *mb[MAX_MBS]; /* spare mbuf storage. */
int next_mb; /* Which mbuf to use next. */
int last_mb; /* Last mbuf. */
int tx_start_thresh; /* Current TX_start_thresh. */
int tx_succ_ok; /* # packets sent in sequence w/o underrun */
caddr_t bpf; /* BPF "magic cookie" */
char bus32bit; /* 32bit access possible */
} ep_softc[NEP];
static int epprobe __P((struct isa_device *));
static int epattach __P((struct isa_device *));
static int epioctl __P((struct ifnet * ifp, int, caddr_t));
void epinit __P((int));
void epintr __P((int));
void epmbuffill __P((void *));
static void epmbufempty __P((struct ep_softc *));
void epread __P((struct ep_softc *));
void epreset __P((int));
void epstart __P((struct ifnet *));
void epstop __P((int));
void epwatchdog __P((int));
struct isa_driver epdriver = {
epprobe,
epattach,
"ep"
};
static struct kern_devconf kdc_ep[NEP] = { {
0, 0, 0, /* filled in by dev_attach */
"ep", 0, { MDDT_ISA, 0, "net" },
isa_generic_externalize, 0, 0, ISA_EXTERNALLEN,
&kdc_isa0, /* parent */
0, /* parentdata */
DC_BUSY, /* network interfaces are always ``open'' */
"3Com 3C509 Ethernet adapter"
} };
static inline void
ep_registerdev(struct isa_device *id)
{
if(id->id_unit)
kdc_ep[id->id_unit] = kdc_ep[0];
kdc_ep[id->id_unit].kdc_unit = id->id_unit;
kdc_ep[id->id_unit].kdc_parentdata = id;
dev_attach(&kdc_ep[id->id_unit]);
}
static int send_ID_sequence __P((u_short));
static u_short epreadeeprom __P((int, int));
static int epbusyeeprom __P((int, ushort));
#define MAXEPCARDS 20 /* if you have 21 cards in your machine... you lose */
static struct epcard {
int iobase;
u_short irq;
char available;
char bus32bit;
} epcards[MAXEPCARDS];
static int nepcards;
static void
epaddcard(p, i, mode)
short p;
u_short i;
char mode;
{
if (nepcards >= sizeof(epcards)/sizeof(epcards[0]))
return;
epcards[nepcards].iobase = p;
epcards[nepcards].irq = 1 << ((i == 2) ? 9 : i);
epcards[nepcards].available = 1;
epcards[nepcards].bus32bit = mode;
nepcards++;
}
/*
* 3c579 cards on the EISA bus are probed by their slot number. 3c509
* cards on the ISA bus are probed in ethernet address order. The probe
* sequence requires careful orchestration, and we'd like like to allow
* the irq and base address to be wildcarded. So, we probe all the cards
* the first time epprobe() is called. On subsequent calls we look for
* matching cards.
*/
int
epprobe(is)
struct isa_device *is;
{
struct ep_softc *sc = &ep_softc[is->id_unit];
static int probed;
int slot, iobase, i;
u_short k, k2;
u_short prodid;
if (probed==0) {
probed = 1;
/* find all EISA cards */
for (slot = 1; slot < 16; slot++) {
iobase = 0x1000 * slot;
outw(iobase + EP_COMMAND, GLOBAL_RESET);
DELAY(1000);
if (inw(iobase + EISA_VENDOR) != MFG_ID)
continue;
k = inw(iobase + EISA_MODEL);
#ifdef EP_DEBUG
printf("prod id = %x ", k);
prodid = k;
#endif
if ((k & 0xf0ff) != PROD_ID)
continue;
k = inw(iobase + EP_W0_CONFIG_CTRL);
/* enable adapter */
outw(iobase + EP_W0_CONFIG_CTRL, k | 1);
#ifdef EP_DEBUG
printf("config = %x ", k);
#endif
/* read in eeprom address configuration */
if (epbusyeeprom(slot - 1, iobase))
continue;
outw(iobase + EP_W0_EEPROM_COMMAND, READ_EEPROM | EEPROM_ADDR_CFG);
if (epbusyeeprom(slot - 1, iobase))
continue;
k = inw(iobase + EP_W0_EEPROM_DATA);
#ifdef EP_DEBUG
printf("addr_cfg = %x ", k);
#endif
outw(iobase + EP_W0_ADDRESS_CFG, k);
/* read in eeprom resource configuration */
if (epbusyeeprom(slot - 1, iobase))
continue;
outw(iobase + EP_W0_EEPROM_COMMAND, READ_EEPROM | EEPROM_RESOURCE_CFG);
if (epbusyeeprom(slot - 1, iobase))
continue;
k2 = inw(iobase + EP_W0_EEPROM_DATA);
#ifdef EP_DEBUG
/** XXXXXXXXXXXXXXXXXXXXX*/
/* This doesn't give back the actual IRQ number as it should be , ATS */
/* In the moment simply hardcoded the IRQ's for testing purposes */
printf("resource config = %x\n", k2);
if (prodid == 0x9150) /* the 3c509 card */
k2 = 7 << 12;
else
k2 = 3 << 12; /* the eisa 3c579 card set to irq 3 */
#endif
outw(iobase + EP_W0_RESOURCE_CFG, k2);
epaddcard(iobase, k2 >> 12, 1);
}
/* find all isa cards */
#ifdef 0
outw(BASE + EP_COMMAND, GLOBAL_RESET);
#endif
DELAY(1000);
elink_reset(); /* global reset to ELINK_ID_PORT */
DELAY(1000);
for (slot = 0; slot < 10; slot++) {
outb(ELINK_ID_PORT, 0x00);
elink_idseq(ELINK_509_POLY);
DELAY(1000);
k = epreadeeprom(ELINK_ID_PORT, EEPROM_MFG_ID);
if (k != MFG_ID)
continue;
k = epreadeeprom(ELINK_ID_PORT, EEPROM_PROD_ID);
if ((k & 0xf0ff) != PROD_ID)
continue;
k = epreadeeprom(ELINK_ID_PORT, EEPROM_ADDR_CFG);
k = (k & 0x1f) * 0x10 + 0x200;
k2 = epreadeeprom(ELINK_ID_PORT, EEPROM_RESOURCE_CFG);
k2 >>= 12;
epaddcard(k, k2, 0);
/* so card will not respond to contention again */
outb(ELINK_ID_PORT, TAG_ADAPTER_0 + 1);
/*
* XXX: this should probably not be done here
* because it enables the drq/irq lines from
* the board. Perhaps it should be done after
* we have checked for irq/drq collisions?
*/
outb(ELINK_ID_PORT, ACTIVATE_ADAPTER_TO_CONFIG);
}
/* XXX should we sort by ethernet address? */
}
/*
* a very specific search order:
* exact iobase & irq
* exact iobase, wildcard irq
* wildcard iobase, exact irq
* wildcard iobase & irq
* else fail..
*/
if (is->id_iobase != 0 && is->id_irq != (u_short)0) {
for (i = 0; i<nepcards; i++) {
if (epcards[i].available == 0)
continue;
if (is->id_iobase == epcards[i].iobase &&
is->id_irq == epcards[i].irq)
goto good;
}
}
if (is->id_iobase != 0 && is->id_irq == (u_short)0) {
for (i = 0; i<nepcards; i++) {
if (epcards[i].available == 0)
continue;
if (is->id_iobase == epcards[i].iobase)
goto good;
}
}
if (is->id_iobase == 0 && is->id_irq != (u_short)0) {
for (i = 0; i<nepcards; i++) {
if (epcards[i].available == 0)
continue;
if (is->id_irq == epcards[i].irq)
goto good;
}
}
return 0;
good:
epcards[i].available = 0;
sc->bus32bit = epcards[i].bus32bit;
is->id_iobase = epcards[i].iobase;
return (0x10); /* 16 bytes of I/O space used. */
}
static int
epattach(is)
struct isa_device *is;
{
struct ep_softc *sc = &ep_softc[is->id_unit];
struct ifnet *ifp = &sc->arpcom.ac_if;
u_short i;
struct ifaddr *ifa;
struct sockaddr_dl *sdl;
sc->ep_iobase = is->id_iobase;
printf("ep%d: ", is->id_unit);
sc->ep_connectors = 0;
i = inw(is->id_iobase + EP_W0_CONFIG_CTRL);
if (i & IS_AUI) {
printf("aui");
sc->ep_connectors |= AUI;
}
if (i & IS_BNC) {
if (sc->ep_connectors)
printf("/");
printf("bnc");
sc->ep_connectors |= BNC;
}
if (i & IS_UTP) {
if (sc->ep_connectors)
printf("/");
printf("utp");
sc->ep_connectors |= UTP;
}
if (!sc->ep_connectors)
printf("no connectors!");
/*
* Read the station address from the eeprom
*/
for (i = 0; i < 3; i++) {
u_short *p;
GO_WINDOW(0);
if (epbusyeeprom(is->id_unit, sc->ep_iobase))
return(0);
outw(BASE + EP_W0_EEPROM_COMMAND, READ_EEPROM | i);
if (epbusyeeprom(is->id_unit, sc->ep_iobase))
return(0);
p =(u_short *)&sc->arpcom.ac_enaddr[i*2];
*p = htons(inw(BASE + EP_W0_EEPROM_DATA));
GO_WINDOW(2);
outw(BASE + EP_W2_ADDR_0 + (i * 2), ntohs(*p));
}
printf(" address %s\n", ether_sprintf(sc->arpcom.ac_enaddr));
ifp->if_unit = is->id_unit;
ifp->if_name = "ep";
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS |
IFF_MULTICAST ;
ifp->if_init = epinit;
ifp->if_output = ether_output;
ifp->if_start = epstart;
ifp->if_ioctl = epioctl;
ifp->if_watchdog = epwatchdog;
if_attach(ifp);
ep_registerdev(is);
/*
* Fill the hardware address into ifa_addr if we find an
* AF_LINK entry. We need to do this so bpf's can get the hardware
* addr of this card. netstat likes this too!
*/
ifa = ifp->if_addrlist;
while ((ifa != 0) && (ifa->ifa_addr != 0) &&
(ifa->ifa_addr->sa_family != AF_LINK))
ifa = ifa->ifa_next;
if ((ifa != 0) && (ifa->ifa_addr != 0)) {
sdl = (struct sockaddr_dl *) ifa->ifa_addr;
sdl->sdl_type = IFT_ETHER;
sdl->sdl_alen = ETHER_ADDR_LEN;
sdl->sdl_slen = 0;
bcopy(sc->arpcom.ac_enaddr, LLADDR(sdl), ETHER_ADDR_LEN);
}
#if NBPFILTER > 0
bpfattach(&sc->bpf, ifp, DLT_EN10MB, sizeof(struct ether_header));
#endif
sc->tx_start_thresh = 20; /* probably a good starting point. */
return 1;
}
/*
* The order in here seems important. Otherwise we may not receive
* interrupts. ?!
*/
void
epinit(unit)
int unit;
{
register struct ep_softc *sc = &ep_softc[unit];
register struct ifnet *ifp = &sc->arpcom.ac_if;
int s, i;
if (ifp->if_addrlist == (struct ifaddr *) 0)
return;
s = splimp();
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
;
GO_WINDOW(0);
/* Disable the card */
outw(BASE + EP_W0_CONFIG_CTRL, 0);
/* Enable the card */
outw(BASE + EP_W0_CONFIG_CTRL, ENABLE_DRQ_IRQ);
GO_WINDOW(2);
/* Reload the ether_addr. */
for (i = 0; i < 6; i++)
outb(BASE + EP_W2_ADDR_0 + i, sc->arpcom.ac_enaddr[i]);
outw(BASE + EP_COMMAND, RX_RESET);
outw(BASE + EP_COMMAND, TX_RESET);
/* Window 1 is operating window */
GO_WINDOW(1);
for (i = 0; i < 31; i++)
inb(BASE + EP_W1_TX_STATUS);
/* get rid of stray intr's */
outw(BASE + EP_COMMAND, ACK_INTR | 0xff);
outw(BASE + EP_COMMAND, SET_RD_0_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
S_TX_COMPLETE | S_TX_AVAIL);
outw(BASE + EP_COMMAND, SET_INTR_MASK | S_CARD_FAILURE | S_RX_COMPLETE |
S_TX_COMPLETE | S_TX_AVAIL);
outw(BASE + EP_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL |
FIL_MULTICAST | FIL_BRDCST);
/*
* you can `ifconfig (link0|-link0) ep0' to get the following
* behaviour:
* -link0 disable AUI/UTP. enable BNC.
* link0 disable BNC. enable AUI. if the card has a UTP
* connector, that is enabled too. not sure, but it
* seems you have to be careful to not plug things
* into both AUI & UTP.
*/
#if defined(__NetBSD__)
if (!(ifp->if_flags & IFF_LINK0) && (sc->ep_connectors & BNC)) {
#else
if (!(ifp->if_flags & IFF_ALTPHYS) && (sc->ep_connectors & BNC)) {
#endif
outw(BASE + EP_COMMAND, START_TRANSCEIVER);
DELAY(1000);
}
#if defined(__NetBSD__)
if ((ifp->if_flags & IFF_LINK0) && (sc->ep_connectors & UTP)) {
#else
if ((ifp->if_flags & IFF_ALTPHYS) && (sc->ep_connectors & UTP)) {
#endif
GO_WINDOW(4);
outw(BASE + EP_W4_MEDIA_TYPE, ENABLE_UTP);
GO_WINDOW(1);
}
outw(BASE + EP_COMMAND, RX_ENABLE);
outw(BASE + EP_COMMAND, TX_ENABLE);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE; /* just in case */
/*
* Store up a bunch of mbuf's for use later. (MAX_MBS). First we
* free up any that we had in case we're being called from intr or
* somewhere else.
*/
sc->last_mb = 0;
sc->next_mb = 0;
epmbuffill((void *)sc);
epstart(ifp);
splx(s);
}
static const char padmap[] = {0, 3, 2, 1};
void
epstart(ifp)
struct ifnet *ifp;
{
register struct ep_softc *sc = &ep_softc[ifp->if_unit];
struct mbuf *m, *top;
int s, len, pad;
s = splimp();
if (sc->arpcom.ac_if.if_flags & IFF_OACTIVE) {
splx(s);
return;
}
startagain:
/* Sneak a peek at the next packet */
m = sc->arpcom.ac_if.if_snd.ifq_head;
if (m == 0) {
splx(s);
return;
}
#if 0
len = m->m_pkthdr.len;
#else
for (len = 0, top = m; m; m = m->m_next)
len += m->m_len;
#endif
pad = padmap[len & 3];
/*
* The 3c509 automatically pads short packets to minimum ethernet
* length, but we drop packets that are too large. Perhaps we should
* truncate them instead?
*/
if (len + pad > ETHER_MAX_LEN) {
/* packet is obviously too large: toss it */
++sc->arpcom.ac_if.if_oerrors;
IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m);
m_freem(m);
goto readcheck;
}
if (inw(BASE + EP_W1_FREE_TX) < len + pad + 4) {
/* no room in FIFO */
outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | (len + pad + 4));
sc->arpcom.ac_if.if_flags |= IFF_OACTIVE;
splx(s);
return;
} else {
outw(BASE + EP_COMMAND, SET_TX_AVAIL_THRESH | 2044);
}
IF_DEQUEUE(&sc->arpcom.ac_if.if_snd, m);
if (m == 0) { /* not really needed */
splx(s);
return;
}
outw(BASE + EP_COMMAND, SET_TX_START_THRESH |
(len / 4 + sc->tx_start_thresh));
outw(BASE + EP_W1_TX_PIO_WR_1, len);
outw(BASE + EP_W1_TX_PIO_WR_1, 0xffff); /* Second dword meaningless */
for (top = m; m != 0; m = m->m_next) {
if (sc->bus32bit) {
if(m->m_len > 3)
outsl(BASE + EP_W1_TX_PIO_WR_1,
mtod(m, caddr_t), m->m_len/4);
if(m->m_len & 3)
outsb(BASE + EP_W1_TX_PIO_WR_1,
mtod(m, caddr_t) + (m->m_len & ~3), m->m_len & 3);
} else {
if (m->m_len > 1)
outsw(BASE + EP_W1_TX_PIO_WR_1, mtod(m, caddr_t),
m->m_len/2);
if (m->m_len & 1)
outb(BASE + EP_W1_TX_PIO_WR_1,
*(mtod(m, caddr_t) + m->m_len - 1));
}
}
while (pad--)
outb(BASE + EP_W1_TX_PIO_WR_1, 0); /* Padding */
#if NBPFILTER > 0
if (sc->bpf) {
u_short etype;
int off, datasize, resid;
struct ether_header *eh;
struct trailer_header {
u_short ether_type;
u_short ether_residual;
} trailer_header;
char ether_packet[ETHER_MAX_LEN];
char *ep;
ep = ether_packet;
/*
* We handle trailers below:
* Copy ether header first, then residual data,
* then data. Put all this in a temporary buffer
* 'ether_packet' and send off to bpf. Since the
* system has generated this packet, we assume
* that all of the offsets in the packet are
* correct; if they're not, the system will almost
* certainly crash in m_copydata.
* We make no assumptions about how the data is
* arranged in the mbuf chain (i.e. how much
* data is in each mbuf, if mbuf clusters are
* used, etc.), which is why we use m_copydata
* to get the ether header rather than assume
* that this is located in the first mbuf.
*/
/* copy ether header */
m_copydata(top, 0, sizeof(struct ether_header), ep);
eh = (struct ether_header *) ep;
ep += sizeof(struct ether_header);
eh->ether_type = etype = ntohs(eh->ether_type);
if (etype >= ETHERTYPE_TRAIL &&
etype < ETHERTYPE_TRAIL + ETHERTYPE_NTRAILER) {
datasize = ((etype - ETHERTYPE_TRAIL) << 9);
off = datasize + sizeof(struct ether_header);
/* copy trailer_header into a data structure */
m_copydata(top, off, sizeof(struct trailer_header),
(caddr_t)&trailer_header.ether_type);
/* copy residual data */
resid = trailer_header.ether_residual -
sizeof(struct trailer_header);
resid = ntohs(resid);
m_copydata(top, off + sizeof(struct trailer_header),
resid, ep);
ep += resid;
/* copy data */
m_copydata(top, sizeof(struct ether_header),
datasize, ep);
ep += datasize;
/* restore original ether packet type */
eh->ether_type = trailer_header.ether_type;
bpf_tap(sc->bpf, ether_packet, ep - ether_packet);
} else
bpf_mtap(sc->bpf, top);
}
#endif
m_freem(top);
++sc->arpcom.ac_if.if_opackets;
/*
* Is another packet coming in? We don't want to overflow the
* tiny RX fifo.
*/
readcheck:
if (inw(BASE + EP_W1_RX_STATUS) & RX_BYTES_MASK) {
splx(s);
return;
}
goto startagain;
}
void
epintr(unit)
int unit;
{
int status, i;
register struct ep_softc *sc = &ep_softc[unit];
struct ifnet *ifp = &sc->arpcom.ac_if;
struct mbuf *m;
status = 0;
checkintr:
status = inw(BASE + EP_STATUS) &
(S_TX_COMPLETE | S_TX_AVAIL | S_RX_COMPLETE | S_CARD_FAILURE);
if (status == 0) {
/* No interrupts. */
outw(BASE + EP_COMMAND, C_INTR_LATCH);
return;
}
/* important that we do this first. */
outw(BASE + EP_COMMAND, ACK_INTR | status);
if (status & S_TX_AVAIL) {
status &= ~S_TX_AVAIL;
inw(BASE + EP_W1_FREE_TX);
sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
epstart(&sc->arpcom.ac_if);
}
if (status & S_RX_COMPLETE) {
status &= ~S_RX_COMPLETE;
epread(sc);
}
if (status & S_CARD_FAILURE) {
printf("ep%d: reset (status: %x)\n", unit, status);
outw(BASE + EP_COMMAND, C_INTR_LATCH);
epinit(unit);
return;
}
if (status & S_TX_COMPLETE) {
status &= ~S_TX_COMPLETE;
/*
* We need to read TX_STATUS until we get a 0 status in
* order to turn off the interrupt flag.
*/
while ((i = inb(BASE + EP_W1_TX_STATUS)) & TXS_COMPLETE) {
outw(BASE + EP_W1_TX_STATUS, 0x0);
if (i & (TXS_MAX_COLLISION | TXS_JABBER | TXS_UNDERRUN)) {
if (i & TXS_MAX_COLLISION)
++sc->arpcom.ac_if.if_collisions;
if (i & (TXS_JABBER | TXS_UNDERRUN)) {
outw(BASE + EP_COMMAND, TX_RESET);
if (i & TXS_UNDERRUN) {
if (sc->tx_start_thresh < ETHER_MAX_LEN) {
sc->tx_start_thresh += 20;
outw(BASE + EP_COMMAND,
SET_TX_START_THRESH |
sc->tx_start_thresh);
}
}
}
outw(BASE + EP_COMMAND, TX_ENABLE);
++sc->arpcom.ac_if.if_oerrors;
}
}
epstart(ifp);
}
goto checkintr;
}
void
epread(sc)
register struct ep_softc *sc;
{
struct ether_header *eh;
struct mbuf *mcur, *m, *m0, *top;
int totlen, lenthisone;
int save_totlen;
u_short etype;
int off, resid;
int count, spinwait;
int i;
totlen = inw(BASE + EP_W1_RX_STATUS);
off = 0;
top = 0;
if (totlen & ERR_RX) {
++sc->arpcom.ac_if.if_ierrors;
goto out;
}
save_totlen = totlen &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */
m = sc->mb[sc->next_mb];
sc->mb[sc->next_mb] = 0;
if (m == 0) {
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == 0)
goto out;
} else {
/* Convert one of our saved mbuf's */
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
m->m_data = m->m_pktdat;
m->m_flags = M_PKTHDR;
}
top = m0 = m; /* We assign top so we can "goto out" */
#define EROUND ((sizeof(struct ether_header) + 3) & ~3)
#define EOFF (EROUND - sizeof(struct ether_header))
m0->m_data += EOFF;
/* Read what should be the header. */
insw(BASE + EP_W1_RX_PIO_RD_1,
mtod(m0, caddr_t), sizeof(struct ether_header) / 2);
m->m_len = sizeof(struct ether_header);
totlen -= sizeof(struct ether_header);
/*
* mostly deal with trailer here. (untested)
* We do this in a couple of parts. First we check for a trailer, if
* we have one we convert the mbuf back to a regular mbuf and set the offset and
* subtract sizeof(struct ether_header) from the pktlen.
* After we've read the packet off the interface (all except for the trailer
* header, we then get a header mbuf, read the trailer into it, and fix up
* the mbuf pointer chain.
*/
eh = mtod(m, struct ether_header *);
eh->ether_type = etype = ntohs((u_short) eh->ether_type);
if (etype >= ETHERTYPE_TRAIL &&
etype < ETHERTYPE_TRAIL + ETHERTYPE_NTRAILER) {
m->m_data = m->m_dat; /* Convert back to regular mbuf. */
m->m_flags = 0; /* This sucks but non-trailers are the norm */
off = (etype - ETHERTYPE_TRAIL) * 512;
if (off >= ETHERMTU) {
m_freem(m);
return; /* sanity */
}
totlen -= sizeof(struct ether_header); /* We don't read the trailer */
m->m_data += 2 * sizeof(u_short); /* Get rid of type & len */
}
while (totlen > 0) {
lenthisone = min(totlen, M_TRAILINGSPACE(m));
if (lenthisone == 0) { /* no room in this one */
mcur = m;
m = sc->mb[sc->next_mb];
sc->mb[sc->next_mb] = 0;
if (!m) {
MGET(m, M_DONTWAIT, MT_DATA);
if (m == 0)
goto out;
} else {
timeout(epmbuffill, (caddr_t)sc, 0);
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
}
if (totlen >= MINCLSIZE)
MCLGET(m, M_DONTWAIT);
m->m_len = 0;
mcur->m_next = m;
lenthisone = min(totlen, M_TRAILINGSPACE(m));
}
if (sc->bus32bit) {
if(totlen > 3) {
lenthisone &= ~3;
insl(BASE + EP_W1_RX_PIO_RD_1,
mtod(m, caddr_t) + m->m_len, lenthisone / 4);
} else
insb(BASE + EP_W1_RX_PIO_RD_1,
mtod(m, caddr_t) + m->m_len, lenthisone);
} else {
if (totlen > 1) {
lenthisone &= ~1;
insw(BASE + EP_W1_RX_PIO_RD_1,
mtod(m, caddr_t) + m->m_len, lenthisone / 2);
} else
*(mtod(m, caddr_t) + m->m_len) =
inb(BASE + EP_W1_RX_PIO_RD_1);
}
m->m_len += lenthisone;
totlen -= lenthisone;
}
if (off) {
top = sc->mb[sc->next_mb];
sc->mb[sc->next_mb] = 0;
if (top == 0) {
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (top == 0) {
top = m0;
goto out;
}
} else {
/* Convert one of our saved mbuf's */
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
top->m_data = top->m_pktdat;
top->m_flags = M_PKTHDR;
}
insw(BASE + EP_W1_RX_PIO_RD_1, mtod(top, caddr_t),
sizeof(struct ether_header));
top->m_next = m0;
top->m_len = sizeof(struct ether_header);
/* XXX Accomodate for type and len from beginning of trailer */
top->m_pkthdr.len = save_totlen - (2 * sizeof(u_short));
} else {
top = m0;
top->m_pkthdr.len = save_totlen;
}
top->m_pkthdr.rcvif = &sc->arpcom.ac_if;
outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
;
++sc->arpcom.ac_if.if_ipackets;
#if NBPFILTER > 0
if (sc->bpf) {
bpf_mtap(sc->bpf, top);
/*
* Note that the interface cannot be in promiscuous mode if
* there are no BPF listeners. And if we are in promiscuous
* mode, we have to check if this packet is really ours.
*/
if ((sc->arpcom.ac_if.if_flags & IFF_PROMISC) &&
(eh->ether_dhost[0] & 1) == 0 &&
bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
sizeof(eh->ether_dhost)) != 0 &&
bcmp(eh->ether_dhost, etherbroadcastaddr,
sizeof(eh->ether_dhost)) != 0) {
m_freem(top);
return;
}
}
#endif
m_adj(top, sizeof(struct ether_header));
ether_input(&sc->arpcom.ac_if, eh, top);
return;
out: outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
;
if (top)
m_freem(top);
}
/*
* Look familiar?
*/
static int
epioctl(ifp, cmd, data)
register struct ifnet *ifp;
int cmd;
caddr_t data;
{
register struct ifaddr *ifa = (struct ifaddr *) data;
struct ep_softc *sc = &ep_softc[ifp->if_unit];
struct ifreq *ifr = (struct ifreq *) data;
int s, error = 0;
switch (cmd) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
epinit(ifp->if_unit); /* before arpwhohas */
((struct arpcom *) ifp)->ac_ipaddr = IA_SIN(ifa)->sin_addr;
arpwhohas((struct arpcom *) ifp, &IA_SIN(ifa)->sin_addr);
break;
#endif
#ifdef NS
case AF_NS:
{
register struct ns_addr *ina = &(IA_SNS(ifa)->sns_addr);
if (ns_nullhost(*ina))
ina->x_host =
*(union ns_host *)(sc->arpcom.ac_enaddr);
else {
ifp->if_flags &= ~IFF_RUNNING;
bcopy((caddr_t) ina->x_host.c_host,
(caddr_t)sc->arpcom.ac_enaddr,
sizeof(sc->arpcom.ac_enaddr));
}
epinit(ifp->if_unit);
break;
}
#endif
default:
epinit(ifp->if_unit);
break;
}
break;
case SIOCSIFFLAGS:
if ((ifp->if_flags & IFF_UP) == 0 && ifp->if_flags & IFF_RUNNING) {
ifp->if_flags &= ~IFF_RUNNING;
epstop(ifp->if_unit);
epmbufempty(sc);
break;
}
if (ifp->if_flags & IFF_UP && (ifp->if_flags & IFF_RUNNING) == 0)
epinit(ifp->if_unit);
break;
#ifdef notdef
case SIOCGHWADDR:
bcopy((caddr_t) sc->sc_addr, (caddr_t) &ifr->ifr_data,
sizeof(sc->sc_addr));
break;
#endif
case SIOCSIFMTU:
/*
* Set the interface MTU.
*/
if (ifr->ifr_mtu > ETHERMTU) {
error = EINVAL;
} else {
ifp->if_mtu = ifr->ifr_mtu;
}
break;
default:
error = EINVAL;
}
return (error);
}
void
epreset(unit)
int unit;
{
int s = splimp();
epstop(unit);
epinit(unit);
splx(s);
}
void
epwatchdog(unit)
int unit;
{
struct ep_softc *sc = &ep_softc[unit];
log(LOG_ERR, "ep%d: watchdog\n", unit);
++sc->arpcom.ac_if.if_oerrors;
epreset(unit);
}
void
epstop(unit)
int unit;
{
struct ep_softc *sc = &ep_softc[unit];
outw(BASE + EP_COMMAND, RX_DISABLE);
outw(BASE + EP_COMMAND, RX_DISCARD_TOP_PACK);
while (inw(BASE + EP_STATUS) & S_COMMAND_IN_PROGRESS)
;
outw(BASE + EP_COMMAND, TX_DISABLE);
outw(BASE + EP_COMMAND, STOP_TRANSCEIVER);
outw(BASE + EP_COMMAND, RX_RESET);
outw(BASE + EP_COMMAND, TX_RESET);
outw(BASE + EP_COMMAND, C_INTR_LATCH);
outw(BASE + EP_COMMAND, SET_RD_0_MASK);
outw(BASE + EP_COMMAND, SET_INTR_MASK);
outw(BASE + EP_COMMAND, SET_RX_FILTER);
}
/*
* This is adapted straight from the book. There's probably a better way.
*/
static int
send_ID_sequence(port)
u_short port;
{
char cx, al;
cx = 0x0ff;
al = 0x0ff;
outb(port, 0x0);
DELAY(1000);
outb(port, 0x0);
DELAY(1000);
loop1: cx--;
outb(port, al);
if (!(al & 0x80)) {
al = al << 1;
goto loop1;
}
al = al << 1;
al ^= 0xcf;
if (cx)
goto loop1;
return(1);
}
/*
* We get eeprom data from the id_port given an offset into the
* eeprom. Basically; after the ID_sequence is sent to all of
* the cards; they enter the ID_CMD state where they will accept
* command requests. 0x80-0xbf loads the eeprom data. We then
* read the port 16 times and with every read; the cards check
* for contention (ie: if one card writes a 0 bit and another
* writes a 1 bit then the host sees a 0. At the end of the cycle;
* each card compares the data on the bus; if there is a difference
* then that card goes into ID_WAIT state again). In the meantime;
* one bit of data is returned in the AX register which is conveniently
* returned to us by inb(). Hence; we read 16 times getting one
* bit of data with each read.
*/
static u_short
epreadeeprom(id_port, offset)
int id_port;
int offset;
{
int i, data = 0;
outb(id_port, 0x80 + offset);
DELAY(1000);
for (i = 0; i < 16; i++)
data = (data << 1) | (inw(id_port) & 1);
return (data);
}
static int
epbusyeeprom(unit, base)
int unit; ushort base;
{
int i = 0, j;
while (i++ < 100) {
j = inw(base + EP_W0_EEPROM_COMMAND);
if (j & EEPROM_BUSY)
DELAY(100);
else
break;
}
if (i >= 100) {
printf("\nep%d: eeprom failed to come ready.\n", unit);
return (1);
}
if (j & EEPROM_TST_MODE) {
printf("\nep%d: 3c509 in test mode. Erase pencil mark!\n", unit);
return (1);
}
return (0);
}
void
epmbuffill(sp)
void *sp;
{
struct ep_softc *sc = (struct ep_softc *)sp;
int s, i;
s = splimp();
i = sc->last_mb;
do {
if(sc->mb[i] == NULL)
MGET(sc->mb[i], M_DONTWAIT, MT_DATA);
if(sc->mb[i] == NULL)
break;
i = (i + 1) % MAX_MBS;
} while (i != sc->next_mb);
sc->last_mb = i;
splx(s);
}
static void
epmbufempty(sc)
struct ep_softc *sc;
{
int s, i;
s = splimp();
for (i = 0; i<MAX_MBS; i++) {
if (sc->mb[i]) {
m_freem(sc->mb[i]);
sc->mb[i] = NULL;
}
}
sc->last_mb = sc->next_mb = 0;
untimeout(epmbuffill, sc);
splx(s);
}
#endif /* NEP > 0 */
Reference in New Issue View Git Blame Copy Permalink