1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-27 11:55:06 +00:00
freebsd/sys/netinet6/ip6_ipsec.c
Andrey V. Elsukov f367798498 Take extra reference to security policy before calling crypto_dispatch().
Currently we perform crypto requests for IPSEC synchronous for most of
crypto providers (software, aesni) and only VIA padlock calls crypto
callback asynchronous. In synchronous mode it is possible, that security
policy will be removed during the processing crypto request. And crypto
callback will release the last reference to SP. Then upon return into
ipsec[46]_process_packet() IPSECREQUEST_UNLOCK() will be called to already
freed request. To prevent this we will take extra reference to SP.

PR:		201876
Sponsored by:	Yandex LLC
2015-09-30 08:16:33 +00:00

298 lines
8.1 KiB
C

/*-
* Copyright (c) 1982, 1986, 1988, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include "opt_sctp.h"
#include "opt_ipsec.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/mac.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/vnet.h>
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/ip6.h>
#include <netinet/in_pcb.h>
#include <netinet/ip_var.h>
#include <netinet/ip_options.h>
#ifdef SCTP
#include <netinet/sctp_crc32.h>
#endif
#include <machine/in_cksum.h>
#include <netipsec/ipsec.h>
#include <netipsec/ipsec6.h>
#include <netipsec/xform.h>
#include <netipsec/key.h>
#ifdef IPSEC_DEBUG
#include <netipsec/key_debug.h>
#else
#define KEYDEBUG(lev,arg)
#endif
#include <netinet6/ip6_ipsec.h>
#include <netinet6/ip6_var.h>
extern struct protosw inet6sw[];
#ifdef IPSEC_FILTERTUNNEL
static VNET_DEFINE(int, ip6_ipsec6_filtertunnel) = 1;
#else
static VNET_DEFINE(int, ip6_ipsec6_filtertunnel) = 0;
#endif
#define V_ip6_ipsec6_filtertunnel VNET(ip6_ipsec6_filtertunnel)
SYSCTL_DECL(_net_inet6_ipsec6);
SYSCTL_INT(_net_inet6_ipsec6, OID_AUTO, filtertunnel,
CTLFLAG_VNET | CTLFLAG_RW, &VNET_NAME(ip6_ipsec6_filtertunnel), 0,
"If set filter packets from an IPsec tunnel.");
/*
* Check if we have to jump over firewall processing for this packet.
* Called from ip6_input().
* 1 = jump over firewall, 0 = packet goes through firewall.
*/
int
ip6_ipsec_filtertunnel(struct mbuf *m)
{
/*
* Bypass packet filtering for packets previously handled by IPsec.
*/
if (!V_ip6_ipsec6_filtertunnel &&
m_tag_find(m, PACKET_TAG_IPSEC_IN_DONE, NULL) != NULL)
return (1);
return (0);
}
/*
* Check if this packet has an active SA and needs to be dropped instead
* of forwarded.
* Called from ip6_forward().
* 1 = drop packet, 0 = forward packet.
*/
int
ip6_ipsec_fwd(struct mbuf *m)
{
return (ipsec6_in_reject(m, NULL));
}
/*
* Check if protocol type doesn't have a further header and do IPSEC
* decryption or reject right now. Protocols with further headers get
* their IPSEC treatment within the protocol specific processing.
* Called from ip6_input().
* 1 = drop packet, 0 = continue processing packet.
*/
int
ip6_ipsec_input(struct mbuf *m, int nxt)
{
/*
* enforce IPsec policy checking if we are seeing last header.
* note that we do not visit this with protocols with pcb layer
* code - like udp/tcp/raw ip.
*/
if ((inet6sw[ip6_protox[nxt]].pr_flags & PR_LASTHDR) != 0)
return (ipsec6_in_reject(m, NULL));
return (0);
}
/*
* Called from ip6_output().
* 1 = drop packet, 0 = continue processing packet,
* -1 = packet was reinjected and stop processing packet
*/
int
ip6_ipsec_output(struct mbuf **m, struct inpcb *inp, int *error)
{
struct secpolicy *sp;
/*
* Check the security policy (SP) for the packet and, if
* required, do IPsec-related processing. There are two
* cases here; the first time a packet is sent through
* it will be untagged and handled by ipsec4_checkpolicy.
* If the packet is resubmitted to ip6_output (e.g. after
* AH, ESP, etc. processing), there will be a tag to bypass
* the lookup and related policy checking.
*/
if (m_tag_find(*m, PACKET_TAG_IPSEC_OUT_DONE, NULL) != NULL) {
*error = 0;
return (0);
}
sp = ipsec4_checkpolicy(*m, IPSEC_DIR_OUTBOUND, error, inp);
/*
* There are four return cases:
* sp != NULL apply IPsec policy
* sp == NULL, error == 0 no IPsec handling needed
* sp == NULL, error == -EINVAL discard packet w/o error
* sp == NULL, error != 0 discard packet, report error
*/
if (sp != NULL) {
/*
* Do delayed checksums now because we send before
* this is done in the normal processing path.
*/
#ifdef INET
if ((*m)->m_pkthdr.csum_flags & CSUM_DELAY_DATA) {
in_delayed_cksum(*m);
(*m)->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA;
}
#endif
if ((*m)->m_pkthdr.csum_flags & CSUM_DELAY_DATA_IPV6) {
in6_delayed_cksum(*m, (*m)->m_pkthdr.len - sizeof(struct ip6_hdr),
sizeof(struct ip6_hdr));
(*m)->m_pkthdr.csum_flags &= ~CSUM_DELAY_DATA_IPV6;
}
#ifdef SCTP
if ((*m)->m_pkthdr.csum_flags & CSUM_SCTP_IPV6) {
sctp_delayed_cksum(*m, sizeof(struct ip6_hdr));
(*m)->m_pkthdr.csum_flags &= ~CSUM_SCTP_IPV6;
}
#endif
/* NB: callee frees mbuf */
*error = ipsec6_process_packet(*m, sp->req);
KEY_FREESP(&sp);
if (*error == EJUSTRETURN) {
/*
* We had a SP with a level of 'use' and no SA. We
* will just continue to process the packet without
* IPsec processing.
*/
*error = 0;
goto done;
}
/*
* Preserve KAME behaviour: ENOENT can be returned
* when an SA acquire is in progress. Don't propagate
* this to user-level; it confuses applications.
*
* XXX this will go away when the SADB is redone.
*/
if (*error == ENOENT)
*error = 0;
goto reinjected;
} else { /* sp == NULL */
if (*error != 0) {
/*
* Hack: -EINVAL is used to signal that a packet
* should be silently discarded. This is typically
* because we asked key management for an SA and
* it was delayed (e.g. kicked up to IKE).
*/
if (*error == -EINVAL)
*error = 0;
goto bad;
}
/* No IPsec processing for this packet. */
}
done:
return (0);
reinjected:
return (-1);
bad:
if (sp != NULL)
KEY_FREESP(&sp);
return (1);
}
#if 0
/*
* Compute the MTU for a forwarded packet that gets IPSEC encapsulated.
* Called from ip_forward().
* Returns MTU suggestion for ICMP needfrag reply.
*/
int
ip6_ipsec_mtu(struct mbuf *m)
{
int mtu = 0;
/*
* If the packet is routed over IPsec tunnel, tell the
* originator the tunnel MTU.
* tunnel MTU = if MTU - sizeof(IP) - ESP/AH hdrsiz
* XXX quickhack!!!
*/
#ifdef IPSEC
struct secpolicy *sp = NULL;
int ipsecerror;
int ipsechdr;
struct route *ro;
sp = ipsec_getpolicybyaddr(m,
IPSEC_DIR_OUTBOUND,
IP_FORWARDING,
&ipsecerror);
if (sp != NULL) {
/* count IPsec header size */
ipsechdr = ipsec_hdrsiz(m, IPSEC_DIR_OUTBOUND, NULL);
/*
* find the correct route for outer IPv4
* header, compute tunnel MTU.
*/
if (sp->req != NULL &&
sp->req->sav != NULL &&
sp->req->sav->sah != NULL) {
ro = &sp->req->sav->sah->route_cache.sa_route;
if (ro->ro_rt && ro->ro_rt->rt_ifp) {
mtu = ro->ro_rt->rt_mtu ? ro->ro_rt->rt_mtu :
ro->ro_rt->rt_ifp->if_mtu;
mtu -= ipsechdr;
}
}
KEY_FREESP(&sp);
}
#endif /* IPSEC */
/* XXX else case missing. */
return mtu;
}
#endif