Bill Paul 339dabccd7 When in infrastructure mode, use address 3 from the 802.11 header as the ... source address when receiving frames (and keep using address 2 when in pseudo-IBSS mode). This is apparently necessary in order to obtain the true MAC address of the sending station which is needed for PPPoE. Patch supplied by: Blaz Zupan <blaz@amis.net>		2000-04-17 18:47:28 +00:00
..
advansys	- Release allocated resources on error.	2000-04-12 11:32:13 +00:00
aha	More pnpids.	2000-03-25 03:24:43 +00:00
ahb	Remove #include "eisa.h" and #if NEISA > 0	2000-01-29 18:22:33 +00:00
aic	- Added PC-98 Cbus frontend.	2000-03-29 14:32:34 +00:00
aic7xxx	o Correct the offsets into the syncrate table for paritcular	2000-03-18 22:28:20 +00:00
amd	Set the value of rid variable for bus_alloc_resource(dev, SYS_RES_IOPORT,...)	2000-04-12 11:21:55 +00:00
amr	Complete the bio/buf divorce for all code below devfs::strategy	2000-04-15 05:54:02 +00:00
an	Remove unloaded printf. We do this now in the newbus layer.	2000-04-17 04:39:38 +00:00
ar	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
ata	Complete the bio/buf divorce for all code below devfs::strategy	2000-04-15 05:54:02 +00:00
atkbdc	- Add temporary workaround to fool some "clever" KVM switch products	2000-04-02 08:28:21 +00:00
awi	Awi driver, ported from NetBSD from Atsushi Once-san.	2000-04-06 02:48:48 +00:00
bktr	Remove debugging code	2000-04-16 07:56:58 +00:00
buslogic	Remove #include "eisa.h" and #if NEISA > 0 - this is guaranteed by config.	2000-01-29 14:27:26 +00:00
cardbus	Sync to latest cardbusdevs file	1999-11-18 07:22:59 +00:00
ccd	Complete the bio/buf divorce for all code below devfs::strategy	2000-04-15 05:54:02 +00:00
cs	NewBus the cs driver.	2000-03-30 05:16:16 +00:00
cy	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
dc	Teach the 'dc' driver how to pick up settings left over by the	2000-03-11 05:20:56 +00:00
de	A fairly simple newbusification of if_de	2000-03-20 09:18:46 +00:00
dec	* Factor out the object system from new-bus so that it can be used by	2000-04-08 14:17:18 +00:00
dgb	Remove #if NDGB > 0 and #if NDGM > 0	2000-01-29 18:42:45 +00:00
dpt	Use correct offset into register window.	2000-04-07 07:29:31 +00:00
ed	Remove unloaded printf. We do this now in the newbus layer.	2000-04-17 04:39:38 +00:00
eisa	Pre 4.0 tidy up.	2000-01-14 07:14:17 +00:00
en	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
ep	Remove unloaded printf. We do this now in the newbus layer.	2000-04-17 04:39:38 +00:00
ex	Add 'bootverbose' debug messages to assist with tracking down problems	2000-03-13 12:27:21 +00:00
fb	Remove #include "vga.h" and #if NVGA > 0 as it's implied by config.	2000-01-29 14:43:47 +00:00
fdc	Complete the bio/buf divorce for all code below devfs::strategy	2000-04-15 05:54:02 +00:00
fe	Ratoc REX-9880/83 support (PC-98 only). This commit added functions	2000-03-29 12:44:19 +00:00
fxp	Added support for cards and on-motherboard NICs that use an SEEPROM	2000-03-28 04:41:42 +00:00
hea	Remove un-needed #include's.	2000-01-17 20:49:59 +00:00
hfa	Ensure that DMA mappings are freed in error situations.	2000-01-15 21:01:04 +00:00
ic	$Id$ -> $FreeBSD$	1999-08-28 01:08:13 +00:00
ida	- Define registers as offsets from register base rather than offsets from	2000-04-16 06:12:08 +00:00
ie	Remove #if NIE > 0 test, it's guaranteed to be true by config.	2000-01-29 14:41:52 +00:00
iicbus	* Factor out the object system from new-bus so that it can be used by	2000-04-08 14:17:18 +00:00
isp	roll platform versions to 5.0	2000-03-15 18:49:44 +00:00
joy	Add ADS7182 as a known Joystick.	2000-01-18 08:38:35 +00:00
kbd	- Properly keep track of I/O port resources.	2000-03-19 03:25:13 +00:00
lnc	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
mc146818	Major changes to the generic device framework for FreeBSD/alpha:	1998-06-14 13:46:10 +00:00
mca	Set the RF_SHAREABLE flage when we allocate an IRQ.	2000-03-13 11:43:53 +00:00
mcd	Complete the bio/buf divorce for all code below devfs::strategy	2000-04-15 05:54:02 +00:00
md	Complete the bio/buf divorce for all code below devfs::strategy	2000-04-15 05:54:02 +00:00
mii	Change && to || in probe routine so that the mlphy driver doesn't	2000-04-14 15:31:48 +00:00
mlx	Complete the bio/buf divorce for all code below devfs::strategy	2000-04-15 05:54:02 +00:00
mse	- `Newbus'ified the driver.	2000-03-18 15:13:30 +00:00
pccard	Include <sys/bus.h>, which is needed after Doug's latest object changes.	2000-04-16 06:04:13 +00:00
pcf	Port of ppbus standalone framework to the newbus system.	2000-01-14 00:18:06 +00:00
pci	* Factor out the object system from new-bus so that it can be used by	2000-04-08 14:17:18 +00:00
pcic	checkpoint latest pccard/pcic hacking:	2000-04-13 06:42:58 +00:00
pdq	Pre 4.0 tidy up.	2000-01-14 07:14:17 +00:00
ppbus	* Factor out the object system from new-bus so that it can be used by	2000-04-08 14:17:18 +00:00
ppc	Remove #include "ppc.h" and #if NPPC > 0 - this is always true as it is	2000-01-29 14:02:30 +00:00
ray	A messy commit that checkpoints the driver (not known to actually work)	2000-04-15 19:51:18 +00:00
rc	Remove #if NFOO > 0 (it's not required in most cases) and also where it	2000-01-29 16:00:34 +00:00
rp	Introduce ttyread() and ttywrite() which do the canonical thing.	1999-09-28 11:45:31 +00:00
scd	Complete the bio/buf divorce for all code below devfs::strategy	2000-04-15 05:54:02 +00:00
sf	Modify the Adaptec "starfire" driver to reset the PHY on the MII bus	1999-12-05 20:02:45 +00:00
si	Always leave SP_DCEN on (monitor DCD). Otherwise the firmware *really*	2000-01-25 16:45:54 +00:00
sio	Add support for pci modems. ONLY CONTROLLER BASED MODEMS. This	2000-04-01 06:14:21 +00:00
sk	Call sk_start() at the end of sk_intr() if there's packets in the	1999-09-25 04:50:27 +00:00
smbus	* Factor out the object system from new-bus so that it can be used by	2000-04-08 14:17:18 +00:00
sn	Re-enable probe for isa and correct the plug and play issue that	2000-04-08 17:23:46 +00:00
snp	Unstaticize this driver. You can have as many snoop devices as you can	2000-04-02 00:35:37 +00:00
sound	more mmap fixes	2000-04-17 17:06:47 +00:00
speaker	Remove #if NFOO > 0 (it's not required in most cases) and also where it	2000-01-29 16:00:34 +00:00
sr	Make the N2 isa cards probe again. Remove the unused frame relay hooks.	2000-04-08 17:14:00 +00:00
streams	Rename remove_dev() to destroy_dev().	1999-11-08 07:44:01 +00:00
sym	Second patch that prepares for the addition of the	2000-04-16 20:05:36 +00:00
syscons	Unbreak LINT.	2000-04-03 09:24:16 +00:00
ti	Add support for offloading IP/TCP/UDP checksums to NIC hardware which	2000-03-27 19:14:27 +00:00
tx	Driver is now using miibus, and newbus.	2000-04-12 06:51:43 +00:00
usb	Add vendor/device codes for SmartBridges SmartLink USB ethernet adapter	2000-04-14 14:46:22 +00:00
vinum	Make vinum compile again using the "cast to buf" workaround.	2000-04-16 07:18:08 +00:00
vn	Complete the bio/buf divorce for all code below devfs::strategy	2000-04-15 05:54:02 +00:00
vr	Change contigmalloc() lower memory bound from 1MB to 0 to improve	1999-09-25 17:29:02 +00:00
vx	Remove #if NVX > 0 and #if NEISA > 0 (and #include "eisa.h") as it's not	2000-01-29 14:50:32 +00:00
wi	When in infrastructure mode, use address 3 from the 802.11 header as the	2000-04-17 18:47:28 +00:00
wl	Remove NBPF conditionality of bpf calls in most of our network drivers.	1999-09-25 12:06:01 +00:00
xe	Remove #if 0'ed reference to isa_device->id_alive	2000-01-23 18:21:20 +00:00