1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
freebsd/sys/arm/ti/ti_adcreg.h
Luiz Otavio O Souza f7eebb7730 Configure the analog input 7 which, on BBB, is connected to the 3V3B rail
through a voltage divisor (R163 and R164 on page 4 of BBB schematic).

Add a note about this on ti_adc(4) man page.  The ti_adc(4) man page will
first appear on 10.1-RELEASE.

MFC after:	1 week
Suggested by:	Sulev-Madis Silber (ketas)
Manual page reviewed by:	brueffer (D127)
2014-06-02 02:00:17 +00:00

121 lines
4.2 KiB
C

/*-
* Copyright 2014 Luiz Otavio O Souza <loos@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _TI_ADCREG_H_
#define _TI_ADCREG_H_
#define ADC_REVISION 0x000
#define ADC_REV_SCHEME_MSK 0xc0000000
#define ADC_REV_SCHEME_SHIFT 30
#define ADC_REV_FUNC_MSK 0x0fff0000
#define ADC_REV_FUNC_SHIFT 16
#define ADC_REV_RTL_MSK 0x0000f800
#define ADC_REV_RTL_SHIFT 11
#define ADC_REV_MAJOR_MSK 0x00000700
#define ADC_REV_MAJOR_SHIFT 8
#define ADC_REV_CUSTOM_MSK 0x000000c0
#define ADC_REV_CUSTOM_SHIFT 6
#define ADC_REV_MINOR_MSK 0x0000003f
#define ADC_SYSCFG 0x010
#define ADC_SYSCFG_IDLE_MSK 0x000000c0
#define ADC_SYSCFG_IDLE_SHIFT 2
#define ADC_IRQSTATUS_RAW 0x024
#define ADC_IRQSTATUS 0x028
#define ADC_IRQENABLE_SET 0x02c
#define ADC_IRQENABLE_CLR 0x030
#define ADC_IRQ_HW_PEN_SYNC (1 << 10)
#define ADC_IRQ_PEN_UP (1 << 9)
#define ADC_IRQ_OUT_RANGE (1 << 8)
#define ADC_IRQ_FIFO1_UNDR (1 << 7)
#define ADC_IRQ_FIFO1_OVERR (1 << 6)
#define ADC_IRQ_FIFO1_THRES (1 << 5)
#define ADC_IRQ_FIFO0_UNDR (1 << 4)
#define ADC_IRQ_FIFO0_OVERR (1 << 3)
#define ADC_IRQ_FIFO0_THRES (1 << 2)
#define ADC_IRQ_END_OF_SEQ (1 << 1)
#define ADC_IRQ_HW_PEN_ASYNC (1 << 0)
#define ADC_CTRL 0x040
#define ADC_CTRL_STEP_WP (1 << 2)
#define ADC_CTRL_STEP_ID (1 << 1)
#define ADC_CTRL_ENABLE (1 << 0)
#define ADC_STAT 0x044
#define ADC_CLKDIV 0x04c
#define ADC_STEPENABLE 0x054
#define ADC_IDLECONFIG 0x058
#define ADC_STEPCFG1 0x064
#define ADC_STEPDLY1 0x068
#define ADC_STEPCFG2 0x06c
#define ADC_STEPDLY2 0x070
#define ADC_STEPCFG3 0x074
#define ADC_STEPDLY3 0x078
#define ADC_STEPCFG4 0x07c
#define ADC_STEPDLY4 0x080
#define ADC_STEPCFG5 0x084
#define ADC_STEPDLY5 0x088
#define ADC_STEPCFG6 0x08c
#define ADC_STEPDLY6 0x090
#define ADC_STEPCFG7 0x094
#define ADC_STEPDLY7 0x098
#define ADC_STEPCFG8 0x09c
#define ADC_STEPDLY8 0x0a0
#define ADC_STEP_DIFF_CNTRL (1 << 25)
#define ADC_STEP_RFM_MSK 0x01800000
#define ADC_STEP_RFM_SHIFT 23
#define ADC_STEP_RFM_VSSA 0
#define ADC_STEP_RFM_XNUR 1
#define ADC_STEP_RFM_YNLR 2
#define ADC_STEP_RFM_VREFN 3
#define ADC_STEP_INP_MSK 0x00780000
#define ADC_STEP_INP_SHIFT 19
#define ADC_STEP_INM_MSK 0x00078000
#define ADC_STEP_INM_SHIFT 15
#define ADC_STEP_IN_VREFN 8
#define ADC_STEP_RFP_MSK 0x00007000
#define ADC_STEP_RFP_SHIFT 12
#define ADC_STEP_RFP_VDDA 0
#define ADC_STEP_RFP_XPUL 1
#define ADC_STEP_RFP_YPLL 2
#define ADC_STEP_RFP_VREFP 3
#define ADC_STEP_RFP_INTREF 4
#define ADC_STEP_AVG_MSK 0x0000001c
#define ADC_STEP_AVG_SHIFT 2
#define ADC_STEP_MODE_MSK 0x00000003
#define ADC_STEP_MODE_ONESHOT 0x00000000
#define ADC_STEP_MODE_CONTINUOUS 0x00000001
#define ADC_STEP_SAMPLE_DELAY 0xff000000
#define ADC_STEP_OPEN_DELAY 0x0003ffff
#define ADC_FIFO0COUNT 0x0e4
#define ADC_FIFO0THRESHOLD 0x0e8
#define ADC_FIFO0DATA 0x100
#define ADC_FIFO_COUNT_MSK 0x0000007f
#define ADC_FIFO_STEP_ID_MSK 0x000f0000
#define ADC_FIFO_STEP_ID_SHIFT 16
#define ADC_FIFO_DATA_MSK 0x00000fff
#endif /* _TI_ADCREG_H_ */