mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-23 11:18:54 +00:00
b95a9362a0
in the DRIVER_MODULES() declarations. *sigh*
2335 lines
57 KiB
C
2335 lines
57 KiB
C
/*
|
|
* Copyright (c) 1997, 1998
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* 82c168/82c169 PNIC fast ethernet PCI NIC driver
|
|
*
|
|
* Supports various network adapters based on the Lite-On PNIC
|
|
* PCI network controller chip including the LinkSys LNE100TX.
|
|
*
|
|
* Written by Bill Paul <wpaul@ctr.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The PNIC chip is a DEC tulip clone. This driver uses much of the
|
|
* same code from the driver for the Winbond chip (which is also a
|
|
* tulip clone) except for the MII, EEPROM and filter programming.
|
|
*
|
|
* Technically we could merge support for this chip into the 'de'
|
|
* driver, but it's such a mess that I'm afraid to go near it.
|
|
*
|
|
* The PNIC appears to support both an external MII and an internal
|
|
* transceiver. I think most 100Mbps implementations use a PHY attached
|
|
* the the MII. The LinkSys board that I have uses a Myson MTD972
|
|
* 100BaseTX PHY.
|
|
*/
|
|
|
|
#include "bpf.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#if NBPF > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
|
|
#include "opt_bdg.h"
|
|
#ifdef BRIDGE
|
|
#include <net/bridge.h>
|
|
#endif
|
|
|
|
#include <vm/vm.h> /* for vtophys */
|
|
#include <vm/pmap.h> /* for vtophys */
|
|
#include <machine/clock.h> /* for DELAY */
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus_memio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <pci/pcireg.h>
|
|
#include <pci/pcivar.h>
|
|
|
|
#define PN_USEIOSPACE
|
|
|
|
/* #define PN_BACKGROUND_AUTONEG */
|
|
|
|
#define PN_RX_BUG_WAR
|
|
|
|
#include <pci/if_pnreg.h>
|
|
|
|
#ifndef lint
|
|
static const char rcsid[] =
|
|
"$FreeBSD$";
|
|
#endif
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
static struct pn_type pn_devs[] = {
|
|
{ PN_VENDORID, PN_DEVICEID_PNIC,
|
|
"82c168 PNIC 10/100BaseTX" },
|
|
{ PN_VENDORID, PN_DEVICEID_PNIC,
|
|
"82c169 PNIC 10/100BaseTX" },
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
/*
|
|
* Various supported PHY vendors/types and their names. Note that
|
|
* this driver will work with pretty much any MII-compliant PHY,
|
|
* so failure to positively identify the chip is not a fatal error.
|
|
*/
|
|
|
|
static struct pn_type pn_phys[] = {
|
|
{ TI_PHY_VENDORID, TI_PHY_10BT, "<TI ThunderLAN 10BT (internal)>" },
|
|
{ TI_PHY_VENDORID, TI_PHY_100VGPMI, "<TI TNETE211 100VG Any-LAN>" },
|
|
{ NS_PHY_VENDORID, NS_PHY_83840A, "<National Semiconductor DP83840A>"},
|
|
{ LEVEL1_PHY_VENDORID, LEVEL1_PHY_LXT970, "<Level 1 LXT970>" },
|
|
{ INTEL_PHY_VENDORID, INTEL_PHY_82555, "<Intel 82555>" },
|
|
{ SEEQ_PHY_VENDORID, SEEQ_PHY_80220, "<SEEQ 80220>" },
|
|
{ 0, 0, "<MII-compliant physical interface>" }
|
|
};
|
|
|
|
static int pn_probe __P((device_t));
|
|
static int pn_attach __P((device_t));
|
|
static int pn_detach __P((device_t));
|
|
|
|
static int pn_newbuf __P((struct pn_softc *,
|
|
struct pn_chain_onefrag *,
|
|
struct mbuf *));
|
|
static int pn_encap __P((struct pn_softc *, struct pn_chain *,
|
|
struct mbuf *));
|
|
|
|
#ifdef PN_RX_BUG_WAR
|
|
static void pn_rx_bug_war __P((struct pn_softc *,
|
|
struct pn_chain_onefrag *));
|
|
#endif
|
|
static void pn_rxeof __P((struct pn_softc *));
|
|
static void pn_rxeoc __P((struct pn_softc *));
|
|
static void pn_txeof __P((struct pn_softc *));
|
|
static void pn_txeoc __P((struct pn_softc *));
|
|
static void pn_intr __P((void *));
|
|
static void pn_start __P((struct ifnet *));
|
|
static int pn_ioctl __P((struct ifnet *, u_long, caddr_t));
|
|
static void pn_init __P((void *));
|
|
static void pn_stop __P((struct pn_softc *));
|
|
static void pn_watchdog __P((struct ifnet *));
|
|
static void pn_shutdown __P((device_t));
|
|
static int pn_ifmedia_upd __P((struct ifnet *));
|
|
static void pn_ifmedia_sts __P((struct ifnet *, struct ifmediareq *));
|
|
|
|
static void pn_eeprom_getword __P((struct pn_softc *, u_int8_t, u_int16_t *));
|
|
static void pn_read_eeprom __P((struct pn_softc *, caddr_t, int,
|
|
int, int));
|
|
static u_int16_t pn_phy_readreg __P((struct pn_softc *, int));
|
|
static void pn_phy_writereg __P((struct pn_softc *, u_int16_t, u_int16_t));
|
|
|
|
static void pn_autoneg_xmit __P((struct pn_softc *));
|
|
static void pn_autoneg_mii __P((struct pn_softc *, int, int));
|
|
static void pn_setmode_mii __P((struct pn_softc *, int));
|
|
static void pn_getmode_mii __P((struct pn_softc *));
|
|
static void pn_autoneg __P((struct pn_softc *, int, int));
|
|
static void pn_setmode __P((struct pn_softc *, int));
|
|
static void pn_setcfg __P((struct pn_softc *, u_int32_t));
|
|
static u_int32_t pn_calchash __P((u_int8_t *));
|
|
static void pn_setfilt __P((struct pn_softc *));
|
|
static void pn_reset __P((struct pn_softc *));
|
|
static int pn_list_rx_init __P((struct pn_softc *));
|
|
static int pn_list_tx_init __P((struct pn_softc *));
|
|
|
|
#ifdef PN_USEIOSPACE
|
|
#define PN_RES SYS_RES_IOPORT
|
|
#define PN_RID PN_PCI_LOIO
|
|
#else
|
|
#define PN_RES SYS_RES_MEMORY
|
|
#define PN_RID PN_PCI_LOMEM
|
|
#endif
|
|
|
|
static device_method_t pn_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, pn_probe),
|
|
DEVMETHOD(device_attach, pn_attach),
|
|
DEVMETHOD(device_detach, pn_detach),
|
|
DEVMETHOD(device_shutdown, pn_shutdown),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t pn_driver = {
|
|
"if_pn",
|
|
pn_methods,
|
|
sizeof(struct pn_softc),
|
|
};
|
|
|
|
static devclass_t pn_devclass;
|
|
|
|
DRIVER_MODULE(if_pn, pci, pn_driver, pn_devclass, 0, 0);
|
|
|
|
#define PN_SETBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) | (x))
|
|
|
|
#define PN_CLRBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) & ~(x))
|
|
|
|
/*
|
|
* Read a word of data stored in the EEPROM at address 'addr.'
|
|
*/
|
|
static void pn_eeprom_getword(sc, addr, dest)
|
|
struct pn_softc *sc;
|
|
u_int8_t addr;
|
|
u_int16_t *dest;
|
|
{
|
|
register int i;
|
|
u_int32_t r;
|
|
|
|
CSR_WRITE_4(sc, PN_SIOCTL, PN_EE_READ|addr);
|
|
|
|
for (i = 0; i < PN_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
r = CSR_READ_4(sc, PN_SIO);
|
|
if (!(r & PN_SIO_BUSY)) {
|
|
*dest = (u_int16_t)(r & 0x0000FFFF);
|
|
return;
|
|
}
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
/*
|
|
* Read a sequence of words from the EEPROM.
|
|
*/
|
|
static void pn_read_eeprom(sc, dest, off, cnt, swap)
|
|
struct pn_softc *sc;
|
|
caddr_t dest;
|
|
int off;
|
|
int cnt;
|
|
int swap;
|
|
{
|
|
int i;
|
|
u_int16_t word = 0, *ptr;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
pn_eeprom_getword(sc, off + i, &word);
|
|
ptr = (u_int16_t *)(dest + (i * 2));
|
|
if (swap)
|
|
*ptr = ntohs(word);
|
|
else
|
|
*ptr = word;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static u_int16_t pn_phy_readreg(sc, reg)
|
|
struct pn_softc *sc;
|
|
int reg;
|
|
{
|
|
int i;
|
|
u_int32_t rval;
|
|
|
|
CSR_WRITE_4(sc, PN_MII,
|
|
PN_MII_READ | (sc->pn_phy_addr << 23) | (reg << 18));
|
|
|
|
for (i = 0; i < PN_TIMEOUT; i++) {
|
|
DELAY(1);
|
|
rval = CSR_READ_4(sc, PN_MII);
|
|
if (!(rval & PN_MII_BUSY)) {
|
|
if ((u_int16_t)(rval & 0x0000FFFF) == 0xFFFF)
|
|
return(0);
|
|
else
|
|
return((u_int16_t)(rval & 0x0000FFFF));
|
|
}
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void pn_phy_writereg(sc, reg, data)
|
|
struct pn_softc *sc;
|
|
u_int16_t reg;
|
|
u_int16_t data;
|
|
{
|
|
int i;
|
|
|
|
CSR_WRITE_4(sc, PN_MII,
|
|
PN_MII_WRITE | (sc->pn_phy_addr << 23) | (reg << 18) | data);
|
|
|
|
|
|
for (i = 0; i < PN_TIMEOUT; i++) {
|
|
if (!(CSR_READ_4(sc, PN_MII) & PN_MII_BUSY))
|
|
break;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
#define PN_POLY 0xEDB88320
|
|
#define PN_BITS 9
|
|
|
|
static u_int32_t pn_calchash(addr)
|
|
u_int8_t *addr;
|
|
{
|
|
u_int32_t idx, bit, data, crc;
|
|
|
|
/* Compute CRC for the address value. */
|
|
crc = 0xFFFFFFFF; /* initial value */
|
|
|
|
for (idx = 0; idx < 6; idx++) {
|
|
for (data = *addr++, bit = 0; bit < 8; bit++, data >>= 1)
|
|
crc = (crc >> 1) ^ (((crc ^ data) & 1) ? PN_POLY : 0);
|
|
}
|
|
|
|
return (crc & ((1 << PN_BITS) - 1));
|
|
}
|
|
|
|
/*
|
|
* Initiate an autonegotiation session.
|
|
*/
|
|
static void pn_autoneg_xmit(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
u_int16_t phy_sts;
|
|
|
|
pn_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET);
|
|
DELAY(500);
|
|
while(pn_phy_readreg(sc, PHY_BMCR)
|
|
& PHY_BMCR_RESET);
|
|
|
|
phy_sts = pn_phy_readreg(sc, PHY_BMCR);
|
|
phy_sts |= PHY_BMCR_AUTONEGENBL|PHY_BMCR_AUTONEGRSTR;
|
|
pn_phy_writereg(sc, PHY_BMCR, phy_sts);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Invoke autonegotiation on a PHY.
|
|
*/
|
|
static void pn_autoneg_mii(sc, flag, verbose)
|
|
struct pn_softc *sc;
|
|
int flag;
|
|
int verbose;
|
|
{
|
|
u_int16_t phy_sts = 0, media, advert, ability;
|
|
struct ifnet *ifp;
|
|
struct ifmedia *ifm;
|
|
|
|
ifm = &sc->ifmedia;
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ifm->ifm_media = IFM_ETHER | IFM_AUTO;
|
|
|
|
/*
|
|
* The 100baseT4 PHY on the 3c905-T4 has the 'autoneg supported'
|
|
* bit cleared in the status register, but has the 'autoneg enabled'
|
|
* bit set in the control register. This is a contradiction, and
|
|
* I'm not sure how to handle it. If you want to force an attempt
|
|
* to autoneg for 100baseT4 PHYs, #define FORCE_AUTONEG_TFOUR
|
|
* and see what happens.
|
|
*/
|
|
#ifndef FORCE_AUTONEG_TFOUR
|
|
/*
|
|
* First, see if autoneg is supported. If not, there's
|
|
* no point in continuing.
|
|
*/
|
|
phy_sts = pn_phy_readreg(sc, PHY_BMSR);
|
|
if (!(phy_sts & PHY_BMSR_CANAUTONEG)) {
|
|
if (verbose)
|
|
printf("pn%d: autonegotiation not supported\n",
|
|
sc->pn_unit);
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
switch (flag) {
|
|
case PN_FLAG_FORCEDELAY:
|
|
/*
|
|
* XXX Never use this option anywhere but in the probe
|
|
* routine: making the kernel stop dead in its tracks
|
|
* for three whole seconds after we've gone multi-user
|
|
* is really bad manners.
|
|
*/
|
|
pn_autoneg_xmit(sc);
|
|
DELAY(5000000);
|
|
break;
|
|
case PN_FLAG_SCHEDDELAY:
|
|
/*
|
|
* Wait for the transmitter to go idle before starting
|
|
* an autoneg session, otherwise pn_start() may clobber
|
|
* our timeout, and we don't want to allow transmission
|
|
* during an autoneg session since that can screw it up.
|
|
*/
|
|
if (sc->pn_cdata.pn_tx_head != NULL) {
|
|
sc->pn_want_auto = 1;
|
|
return;
|
|
}
|
|
pn_autoneg_xmit(sc);
|
|
ifp->if_timer = 5;
|
|
sc->pn_autoneg = 1;
|
|
sc->pn_want_auto = 0;
|
|
return;
|
|
break;
|
|
case PN_FLAG_DELAYTIMEO:
|
|
ifp->if_timer = 0;
|
|
sc->pn_autoneg = 0;
|
|
break;
|
|
default:
|
|
printf("pn%d: invalid autoneg flag: %d\n", sc->pn_unit, flag);
|
|
return;
|
|
}
|
|
|
|
if (pn_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_AUTONEGCOMP) {
|
|
if (verbose)
|
|
printf("pn%d: autoneg complete, ", sc->pn_unit);
|
|
phy_sts = pn_phy_readreg(sc, PHY_BMSR);
|
|
} else {
|
|
if (verbose)
|
|
printf("pn%d: autoneg not complete, ", sc->pn_unit);
|
|
}
|
|
|
|
media = pn_phy_readreg(sc, PHY_BMCR);
|
|
|
|
/* Link is good. Report modes and set duplex mode. */
|
|
if (pn_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT) {
|
|
if (verbose)
|
|
printf("link status good ");
|
|
advert = pn_phy_readreg(sc, PHY_ANAR);
|
|
ability = pn_phy_readreg(sc, PHY_LPAR);
|
|
|
|
if (advert & PHY_ANAR_100BT4 && ability & PHY_ANAR_100BT4) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_T4;
|
|
media |= PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
printf("(100baseT4)\n");
|
|
} else if (advert & PHY_ANAR_100BTXFULL &&
|
|
ability & PHY_ANAR_100BTXFULL) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
media |= PHY_BMCR_SPEEDSEL;
|
|
media |= PHY_BMCR_DUPLEX;
|
|
printf("(full-duplex, 100Mbps)\n");
|
|
} else if (advert & PHY_ANAR_100BTXHALF &&
|
|
ability & PHY_ANAR_100BTXHALF) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_HDX;
|
|
media |= PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
printf("(half-duplex, 100Mbps)\n");
|
|
} else if (advert & PHY_ANAR_10BTFULL &&
|
|
ability & PHY_ANAR_10BTFULL) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX;
|
|
media &= ~PHY_BMCR_SPEEDSEL;
|
|
media |= PHY_BMCR_DUPLEX;
|
|
printf("(full-duplex, 10Mbps)\n");
|
|
} else if (advert & PHY_ANAR_10BTHALF &&
|
|
ability & PHY_ANAR_10BTHALF) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
media &= ~PHY_BMCR_SPEEDSEL;
|
|
media &= ~PHY_BMCR_DUPLEX;
|
|
printf("(half-duplex, 10Mbps)\n");
|
|
}
|
|
|
|
media &= ~PHY_BMCR_AUTONEGENBL;
|
|
|
|
/* Set ASIC's duplex mode to match the PHY. */
|
|
pn_setcfg(sc, ifm->ifm_media);
|
|
pn_phy_writereg(sc, PHY_BMCR, media);
|
|
} else {
|
|
if (verbose)
|
|
printf("no carrier\n");
|
|
}
|
|
|
|
pn_init(sc);
|
|
|
|
if (sc->pn_tx_pend) {
|
|
sc->pn_autoneg = 0;
|
|
sc->pn_tx_pend = 0;
|
|
pn_start(ifp);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void pn_getmode_mii(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
u_int16_t bmsr;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
bmsr = pn_phy_readreg(sc, PHY_BMSR);
|
|
if (bootverbose)
|
|
printf("pn%d: PHY status word: %x\n", sc->pn_unit, bmsr);
|
|
|
|
/* fallback */
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
|
|
if (bmsr & PHY_BMSR_10BTHALF) {
|
|
if (bootverbose)
|
|
printf("pn%d: 10Mbps half-duplex mode supported\n",
|
|
sc->pn_unit);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
|
|
}
|
|
|
|
if (bmsr & PHY_BMSR_10BTFULL) {
|
|
if (bootverbose)
|
|
printf("pn%d: 10Mbps full-duplex mode supported\n",
|
|
sc->pn_unit);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX;
|
|
}
|
|
|
|
if (bmsr & PHY_BMSR_100BTXHALF) {
|
|
if (bootverbose)
|
|
printf("pn%d: 100Mbps half-duplex mode supported\n",
|
|
sc->pn_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_100_TX|IFM_HDX, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_TX|IFM_HDX;
|
|
}
|
|
|
|
if (bmsr & PHY_BMSR_100BTXFULL) {
|
|
if (bootverbose)
|
|
printf("pn%d: 100Mbps full-duplex mode supported\n",
|
|
sc->pn_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
}
|
|
|
|
/* Some also support 100BaseT4. */
|
|
if (bmsr & PHY_BMSR_100BT4) {
|
|
if (bootverbose)
|
|
printf("pn%d: 100baseT4 mode supported\n", sc->pn_unit);
|
|
ifp->if_baudrate = 100000000;
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_T4, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_100_T4;
|
|
#ifdef FORCE_AUTONEG_TFOUR
|
|
if (bootverbose)
|
|
printf("pn%d: forcing on autoneg support for BT4\n",
|
|
sc->pn_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0 NULL):
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_AUTO;
|
|
#endif
|
|
}
|
|
|
|
if (bmsr & PHY_BMSR_CANAUTONEG) {
|
|
if (bootverbose)
|
|
printf("pn%d: autoneg supported\n", sc->pn_unit);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
|
|
sc->ifmedia.ifm_media = IFM_ETHER|IFM_AUTO;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void pn_autoneg(sc, flag, verbose)
|
|
struct pn_softc *sc;
|
|
int flag;
|
|
int verbose;
|
|
{
|
|
u_int32_t nway = 0, ability;
|
|
struct ifnet *ifp;
|
|
struct ifmedia *ifm;
|
|
|
|
ifm = &sc->ifmedia;
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ifm->ifm_media = IFM_ETHER | IFM_AUTO;
|
|
|
|
switch (flag) {
|
|
case PN_FLAG_FORCEDELAY:
|
|
/*
|
|
* XXX Never use this option anywhere but in the probe
|
|
* routine: making the kernel stop dead in its tracks
|
|
* for three whole seconds after we've gone multi-user
|
|
* is really bad manners.
|
|
*/
|
|
CSR_WRITE_4(sc, PN_GEN,
|
|
PN_GEN_MUSTBEONE|PN_GEN_100TX_LOOP);
|
|
PN_CLRBIT(sc, PN_NWAY, PN_NWAY_AUTONEGRSTR);
|
|
PN_SETBIT(sc, PN_NWAY, PN_NWAY_AUTOENB);
|
|
DELAY(5000000);
|
|
break;
|
|
case PN_FLAG_SCHEDDELAY:
|
|
/*
|
|
* Wait for the transmitter to go idle before starting
|
|
* an autoneg session, otherwise pn_start() may clobber
|
|
* our timeout, and we don't want to allow transmission
|
|
* during an autoneg session since that can screw it up.
|
|
*/
|
|
if (sc->pn_cdata.pn_tx_head != NULL) {
|
|
sc->pn_want_auto = 1;
|
|
return;
|
|
}
|
|
CSR_WRITE_4(sc, PN_GEN,
|
|
PN_GEN_MUSTBEONE|PN_GEN_100TX_LOOP);
|
|
PN_CLRBIT(sc, PN_NWAY, PN_NWAY_AUTONEGRSTR);
|
|
PN_SETBIT(sc, PN_NWAY, PN_NWAY_AUTOENB);
|
|
ifp->if_timer = 5;
|
|
sc->pn_autoneg = 1;
|
|
sc->pn_want_auto = 0;
|
|
return;
|
|
break;
|
|
case PN_FLAG_DELAYTIMEO:
|
|
ifp->if_timer = 0;
|
|
sc->pn_autoneg = 0;
|
|
break;
|
|
default:
|
|
printf("pn%d: invalid autoneg flag: %d\n", sc->pn_unit, flag);
|
|
return;
|
|
}
|
|
|
|
if (CSR_READ_4(sc, PN_NWAY) & PN_NWAY_LPAR) {
|
|
if (verbose)
|
|
printf("pn%d: autoneg complete, ", sc->pn_unit);
|
|
} else {
|
|
if (verbose)
|
|
printf("pn%d: autoneg not complete, ", sc->pn_unit);
|
|
}
|
|
|
|
/* Link is good. Report modes and set duplex mode. */
|
|
if (CSR_READ_4(sc, PN_ISR) & PN_ISR_LINKPASS) {
|
|
if (verbose)
|
|
printf("link status good ");
|
|
|
|
ability = CSR_READ_4(sc, PN_NWAY);
|
|
if (ability & PN_NWAY_LPAR100T4) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_T4;
|
|
nway = PN_NWAY_MODE_100T4;
|
|
printf("(100baseT4)\n");
|
|
} else if (ability & PN_NWAY_LPAR100FULL) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
nway = PN_NWAY_MODE_100FD;
|
|
printf("(full-duplex, 100Mbps)\n");
|
|
} else if (ability & PN_NWAY_LPAR100HALF) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_100_TX|IFM_HDX;
|
|
nway = PN_NWAY_MODE_100HD;
|
|
printf("(half-duplex, 100Mbps)\n");
|
|
} else if (ability & PN_NWAY_LPAR10FULL) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_FDX;
|
|
nway = PN_NWAY_MODE_10FD;
|
|
printf("(full-duplex, 10Mbps)\n");
|
|
} else if (ability & PN_NWAY_LPAR10HALF) {
|
|
ifm->ifm_media = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
nway = PN_NWAY_MODE_10HD;
|
|
printf("(half-duplex, 10Mbps)\n");
|
|
}
|
|
|
|
/* Set ASIC's duplex mode to match the PHY. */
|
|
pn_setcfg(sc, ifm->ifm_media);
|
|
CSR_WRITE_4(sc, PN_NWAY, nway);
|
|
} else {
|
|
if (verbose)
|
|
printf("no carrier\n");
|
|
}
|
|
|
|
pn_init(sc);
|
|
|
|
if (sc->pn_tx_pend) {
|
|
sc->pn_autoneg = 0;
|
|
sc->pn_tx_pend = 0;
|
|
pn_start(ifp);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void pn_setmode(sc, media)
|
|
struct pn_softc *sc;
|
|
int media;
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/*
|
|
* If an autoneg session is in progress, stop it.
|
|
*/
|
|
if (sc->pn_autoneg) {
|
|
printf("pn%d: canceling autoneg session\n", sc->pn_unit);
|
|
ifp->if_timer = sc->pn_autoneg = sc->pn_want_auto = 0;
|
|
PN_CLRBIT(sc, PN_NWAY, PN_NWAY_AUTONEGRSTR);
|
|
}
|
|
|
|
printf("pn%d: selecting NWAY, ", sc->pn_unit);
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_100_T4) {
|
|
printf("100Mbps/T4, half-duplex\n");
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_100_TX) {
|
|
printf("100Mbps, ");
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_10_T) {
|
|
printf("10Mbps, ");
|
|
}
|
|
|
|
if ((media & IFM_GMASK) == IFM_FDX) {
|
|
printf("full duplex\n");
|
|
} else {
|
|
printf("half duplex\n");
|
|
}
|
|
|
|
pn_setcfg(sc, media);
|
|
|
|
return;
|
|
}
|
|
|
|
static void pn_setmode_mii(sc, media)
|
|
struct pn_softc *sc;
|
|
int media;
|
|
{
|
|
u_int16_t bmcr;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/*
|
|
* If an autoneg session is in progress, stop it.
|
|
*/
|
|
if (sc->pn_autoneg) {
|
|
printf("pn%d: canceling autoneg session\n", sc->pn_unit);
|
|
ifp->if_timer = sc->pn_autoneg = sc->pn_want_auto = 0;
|
|
bmcr = pn_phy_readreg(sc, PHY_BMCR);
|
|
bmcr &= ~PHY_BMCR_AUTONEGENBL;
|
|
pn_phy_writereg(sc, PHY_BMCR, bmcr);
|
|
}
|
|
|
|
printf("pn%d: selecting MII, ", sc->pn_unit);
|
|
|
|
bmcr = pn_phy_readreg(sc, PHY_BMCR);
|
|
|
|
bmcr &= ~(PHY_BMCR_AUTONEGENBL|PHY_BMCR_SPEEDSEL|
|
|
PHY_BMCR_DUPLEX|PHY_BMCR_LOOPBK);
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_100_T4) {
|
|
printf("100Mbps/T4, half-duplex\n");
|
|
bmcr |= PHY_BMCR_SPEEDSEL;
|
|
bmcr &= ~PHY_BMCR_DUPLEX;
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_100_TX) {
|
|
printf("100Mbps, ");
|
|
bmcr |= PHY_BMCR_SPEEDSEL;
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_10_T) {
|
|
printf("10Mbps, ");
|
|
bmcr &= ~PHY_BMCR_SPEEDSEL;
|
|
}
|
|
|
|
if ((media & IFM_GMASK) == IFM_FDX) {
|
|
printf("full duplex\n");
|
|
bmcr |= PHY_BMCR_DUPLEX;
|
|
} else {
|
|
printf("half duplex\n");
|
|
bmcr &= ~PHY_BMCR_DUPLEX;
|
|
}
|
|
|
|
pn_setcfg(sc, media);
|
|
pn_phy_writereg(sc, PHY_BMCR, bmcr);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Programming the receiver filter on the tulip/PNIC is gross. You
|
|
* have to construct a special setup frame and download it to the
|
|
* chip via the transmit DMA engine. This routine is also somewhat
|
|
* gross, as the setup frame is sent synchronously rather than putting
|
|
* on the transmit queue. The transmitter has to be stopped, then we
|
|
* can download the frame and wait for the 'owned' bit to clear.
|
|
*
|
|
* We always program the chip using 'hash perfect' mode, i.e. one perfect
|
|
* address (our node address) and a 512-bit hash filter for multicast
|
|
* frames. We also sneak the broadcast address into the hash filter since
|
|
* we need that too.
|
|
*/
|
|
void pn_setfilt(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
struct pn_desc *sframe;
|
|
u_int32_t h, *sp;
|
|
struct ifmultiaddr *ifma;
|
|
struct ifnet *ifp;
|
|
int i;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_TX_ON);
|
|
PN_SETBIT(sc, PN_ISR, PN_ISR_TX_IDLE);
|
|
|
|
sframe = &sc->pn_cdata.pn_sframe;
|
|
sp = (u_int32_t *)&sc->pn_cdata.pn_sbuf;
|
|
bzero((char *)sp, PN_SFRAME_LEN);
|
|
|
|
sframe->pn_status = PN_TXSTAT_OWN;
|
|
sframe->pn_next = vtophys(&sc->pn_ldata->pn_tx_list[0]);
|
|
sframe->pn_data = vtophys(&sc->pn_cdata.pn_sbuf);
|
|
sframe->pn_ctl = PN_SFRAME_LEN | PN_TXCTL_TLINK |
|
|
PN_TXCTL_SETUP | PN_FILTER_HASHPERF;
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_RX_PROMISC);
|
|
else
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_RX_PROMISC);
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI)
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_RX_ALLMULTI);
|
|
|
|
for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
|
|
ifma = ifma->ifma_link.le_next) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = pn_calchash(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
sp[h >> 4] |= 1 << (h & 0xF);
|
|
}
|
|
|
|
if (ifp->if_flags & IFF_BROADCAST) {
|
|
h = pn_calchash(etherbroadcastaddr);
|
|
sp[h >> 4] |= 1 << (h & 0xF);
|
|
}
|
|
|
|
sp[39] = ((u_int16_t *)sc->arpcom.ac_enaddr)[0];
|
|
sp[40] = ((u_int16_t *)sc->arpcom.ac_enaddr)[1];
|
|
sp[41] = ((u_int16_t *)sc->arpcom.ac_enaddr)[2];
|
|
|
|
CSR_WRITE_4(sc, PN_TXADDR, vtophys(sframe));
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_TX_ON);
|
|
CSR_WRITE_4(sc, PN_TXSTART, 0xFFFFFFFF);
|
|
|
|
/*
|
|
* Wait for chip to clear the 'own' bit.
|
|
*/
|
|
for (i = 0; i < PN_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (sframe->pn_status != PN_TXSTAT_OWN)
|
|
break;
|
|
}
|
|
|
|
if (i == PN_TIMEOUT)
|
|
printf("pn%d: failed to send setup frame\n", sc->pn_unit);
|
|
|
|
PN_SETBIT(sc, PN_ISR, PN_ISR_TX_NOBUF|PN_ISR_TX_IDLE);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* In order to fiddle with the
|
|
* 'full-duplex' and '100Mbps' bits in the netconfig register, we
|
|
* first have to put the transmit and/or receive logic in the idle state.
|
|
*/
|
|
static void pn_setcfg(sc, media)
|
|
struct pn_softc *sc;
|
|
u_int32_t media;
|
|
{
|
|
int i, restart = 0;
|
|
|
|
if (CSR_READ_4(sc, PN_NETCFG) & (PN_NETCFG_TX_ON|PN_NETCFG_RX_ON)) {
|
|
restart = 1;
|
|
PN_CLRBIT(sc, PN_NETCFG, (PN_NETCFG_TX_ON|PN_NETCFG_RX_ON));
|
|
|
|
for (i = 0; i < PN_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if ((CSR_READ_4(sc, PN_ISR) & PN_ISR_TX_IDLE) &&
|
|
(CSR_READ_4(sc, PN_ISR) & PN_ISR_RX_IDLE))
|
|
break;
|
|
}
|
|
|
|
if (i == PN_TIMEOUT)
|
|
printf("pn%d: failed to force tx and "
|
|
"rx to idle state\n", sc->pn_unit);
|
|
|
|
}
|
|
|
|
if (IFM_SUBTYPE(media) == IFM_100_TX) {
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_SPEEDSEL);
|
|
if (sc->pn_pinfo == NULL) {
|
|
CSR_WRITE_4(sc, PN_GEN, PN_GEN_MUSTBEONE|
|
|
PN_GEN_SPEEDSEL|PN_GEN_100TX_LOOP);
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_PCS|
|
|
PN_NETCFG_SCRAMBLER|PN_NETCFG_MIIENB);
|
|
PN_SETBIT(sc, PN_NWAY, PN_NWAY_SPEEDSEL);
|
|
}
|
|
} else {
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_SPEEDSEL);
|
|
if (sc->pn_pinfo == NULL) {
|
|
CSR_WRITE_4(sc, PN_GEN,
|
|
PN_GEN_MUSTBEONE|PN_GEN_100TX_LOOP);
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_PCS|
|
|
PN_NETCFG_SCRAMBLER|PN_NETCFG_MIIENB);
|
|
PN_CLRBIT(sc, PN_NWAY, PN_NWAY_SPEEDSEL);
|
|
}
|
|
}
|
|
|
|
if ((media & IFM_GMASK) == IFM_FDX) {
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_FULLDUPLEX);
|
|
if (sc->pn_pinfo == NULL)
|
|
PN_SETBIT(sc, PN_NWAY, PN_NWAY_DUPLEX);
|
|
} else {
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_FULLDUPLEX);
|
|
if (sc->pn_pinfo == NULL)
|
|
PN_CLRBIT(sc, PN_NWAY, PN_NWAY_DUPLEX);
|
|
}
|
|
|
|
if (restart)
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_TX_ON|PN_NETCFG_RX_ON);
|
|
|
|
return;
|
|
}
|
|
|
|
static void pn_reset(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
PN_SETBIT(sc, PN_BUSCTL, PN_BUSCTL_RESET);
|
|
|
|
for (i = 0; i < PN_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (!(CSR_READ_4(sc, PN_BUSCTL) & PN_BUSCTL_RESET))
|
|
break;
|
|
}
|
|
if (i == PN_TIMEOUT)
|
|
printf("pn%d: reset never completed!\n", sc->pn_unit);
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
DELAY(1000);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Probe for a Lite-On PNIC chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
static int pn_probe(dev)
|
|
device_t dev;
|
|
{
|
|
struct pn_type *t;
|
|
u_int32_t rev;
|
|
|
|
t = pn_devs;
|
|
|
|
while(t->pn_name != NULL) {
|
|
if ((pci_get_vendor(dev) == t->pn_vid) &&
|
|
(pci_get_device(dev) == t->pn_did)) {
|
|
if (t->pn_did == PN_DEVICEID_PNIC) {
|
|
rev = pci_read_config(dev,
|
|
PN_PCI_REVISION, 4) & 0xFF;
|
|
switch(rev & PN_REVMASK) {
|
|
case PN_REVID_82C168:
|
|
device_set_desc(dev, t->pn_name);
|
|
return(0);
|
|
break;
|
|
case PN_REVID_82C169:
|
|
t++;
|
|
device_set_desc(dev, t->pn_name);
|
|
return(0);
|
|
default:
|
|
printf("unknown PNIC rev: %x\n", rev);
|
|
break;
|
|
}
|
|
}
|
|
device_set_desc(dev, t->pn_name);
|
|
return(0);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return(ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int pn_attach(dev)
|
|
device_t dev;
|
|
{
|
|
int s, i;
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
u_int32_t command;
|
|
struct pn_softc *sc;
|
|
struct ifnet *ifp;
|
|
int media = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
unsigned int round;
|
|
caddr_t roundptr;
|
|
struct pn_type *p;
|
|
u_int16_t phy_vid, phy_did, phy_sts;
|
|
#ifdef PN_RX_BUG_WAR
|
|
u_int32_t revision = 0;
|
|
#endif
|
|
int unit, error = 0, rid;
|
|
|
|
s = splimp();
|
|
|
|
sc = device_get_softc(dev);
|
|
unit = device_get_unit(dev);
|
|
bzero(sc, sizeof(struct pn_softc));
|
|
|
|
/*
|
|
* Handle power management nonsense.
|
|
*/
|
|
command = pci_read_config(dev, PN_PCI_CAPID, 4) & 0x000000FF;
|
|
if (command == 0x01) {
|
|
|
|
command = pci_read_config(dev, PN_PCI_PWRMGMTCTRL, 4);
|
|
if (command & PN_PSTATE_MASK) {
|
|
u_int32_t iobase, membase, irq;
|
|
|
|
/* Save important PCI config data. */
|
|
iobase = pci_read_config(dev, PN_PCI_LOIO, 4);
|
|
membase = pci_read_config(dev, PN_PCI_LOMEM, 4);
|
|
irq = pci_read_config(dev, PN_PCI_INTLINE, 4);
|
|
|
|
/* Reset the power state. */
|
|
printf("pn%d: chip is in D%d power mode "
|
|
"-- setting to D0\n", unit, command & PN_PSTATE_MASK);
|
|
command &= 0xFFFFFFFC;
|
|
pci_write_config(dev, PN_PCI_PWRMGMTCTRL, command, 4);
|
|
|
|
/* Restore PCI config data. */
|
|
pci_write_config(dev, PN_PCI_LOIO, iobase, 4);
|
|
pci_write_config(dev, PN_PCI_LOMEM, membase, 4);
|
|
pci_write_config(dev, PN_PCI_INTLINE, irq, 4);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
|
command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
|
|
pci_write_config(dev, PCI_COMMAND_STATUS_REG, command, 4);
|
|
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
|
|
|
#ifdef PN_USEIOSPACE
|
|
if (!(command & PCIM_CMD_PORTEN)) {
|
|
printf("pn%d: failed to enable I/O ports!\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
#else
|
|
if (!(command & PCIM_CMD_MEMEN)) {
|
|
printf("pn%d: failed to enable memory mapping!\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
#endif
|
|
|
|
rid = PN_RID;
|
|
sc->pn_res = bus_alloc_resource(dev, PN_RES, &rid,
|
|
0, ~0, 1, RF_ACTIVE);
|
|
|
|
if (sc->pn_res == NULL) {
|
|
printf ("pn%d: couldn't map ports/memory\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
sc->pn_btag = rman_get_bustag(sc->pn_res);
|
|
sc->pn_bhandle = rman_get_bushandle(sc->pn_res);
|
|
|
|
/* Allocate interrupt */
|
|
rid = 0;
|
|
sc->pn_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
if (sc->pn_irq == NULL) {
|
|
printf("pn%d: couldn't map interrupt\n", unit);
|
|
bus_release_resource(dev, PN_RES, PN_RID, sc->pn_res);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_setup_intr(dev, sc->pn_irq, INTR_TYPE_NET,
|
|
pn_intr, sc, &sc->pn_intrhand);
|
|
|
|
if (error) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->pn_res);
|
|
bus_release_resource(dev, PN_RES, PN_RID, sc->pn_res);
|
|
printf("pn%d: couldn't set up irq\n", unit);
|
|
goto fail;
|
|
}
|
|
|
|
/* Save the cache line size. */
|
|
sc->pn_cachesize = pci_read_config(dev, PN_PCI_CACHELEN, 4) & 0xFF;
|
|
|
|
/* Reset the adapter. */
|
|
pn_reset(sc);
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
pn_read_eeprom(sc, (caddr_t)&eaddr, 0, 3, 1);
|
|
|
|
/*
|
|
* A PNIC chip was detected. Inform the world.
|
|
*/
|
|
printf("pn%d: Ethernet address: %6D\n", unit, eaddr, ":");
|
|
|
|
sc->pn_unit = unit;
|
|
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
|
|
sc->pn_ldata_ptr = malloc(sizeof(struct pn_list_data) + 8,
|
|
M_DEVBUF, M_NOWAIT);
|
|
if (sc->pn_ldata_ptr == NULL) {
|
|
printf("pn%d: no memory for list buffers!\n", unit);
|
|
bus_teardown_intr(dev, sc->pn_irq, sc->pn_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->pn_res);
|
|
bus_release_resource(dev, PN_RES, PN_RID, sc->pn_res);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
sc->pn_ldata = (struct pn_list_data *)sc->pn_ldata_ptr;
|
|
round = (uintptr_t)sc->pn_ldata_ptr & 0xF;
|
|
roundptr = sc->pn_ldata_ptr;
|
|
for (i = 0; i < 8; i++) {
|
|
if (round % 8) {
|
|
round++;
|
|
roundptr++;
|
|
} else
|
|
break;
|
|
}
|
|
sc->pn_ldata = (struct pn_list_data *)roundptr;
|
|
bzero(sc->pn_ldata, sizeof(struct pn_list_data));
|
|
|
|
#ifdef PN_RX_BUG_WAR
|
|
revision = pci_read_config(dev, PN_PCI_REVISION, 4) & 0x000000FF;
|
|
if (revision == PN_169B_REV || revision == PN_169_REV ||
|
|
(revision & 0xF0) == PN_168_REV) {
|
|
sc->pn_rx_war = 1;
|
|
sc->pn_rx_buf = malloc(PN_RXLEN * 5, M_DEVBUF, M_NOWAIT);
|
|
if (sc->pn_rx_buf == NULL) {
|
|
printf("pn%d: no memory for workaround buffer\n", unit);
|
|
bus_teardown_intr(dev, sc->pn_irq, sc->pn_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->pn_res);
|
|
bus_release_resource(dev, PN_RES, PN_RID, sc->pn_res);
|
|
free(sc->pn_ldata_ptr, M_DEVBUF);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
} else {
|
|
sc->pn_rx_war = 0;
|
|
}
|
|
#endif
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = unit;
|
|
ifp->if_name = "pn";
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = pn_ioctl;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = pn_start;
|
|
ifp->if_watchdog = pn_watchdog;
|
|
ifp->if_init = pn_init;
|
|
ifp->if_baudrate = 10000000;
|
|
ifp->if_snd.ifq_maxlen = PN_TX_LIST_CNT - 1;
|
|
|
|
ifmedia_init(&sc->ifmedia, 0, pn_ifmedia_upd, pn_ifmedia_sts);
|
|
|
|
if (bootverbose)
|
|
printf("pn%d: probing for a PHY\n", sc->pn_unit);
|
|
for (i = PN_PHYADDR_MIN; i < PN_PHYADDR_MAX + 1; i++) {
|
|
if (bootverbose)
|
|
printf("pn%d: checking address: %d\n",
|
|
sc->pn_unit, i);
|
|
sc->pn_phy_addr = i;
|
|
pn_phy_writereg(sc, PHY_BMCR, PHY_BMCR_RESET);
|
|
DELAY(500);
|
|
while(pn_phy_readreg(sc, PHY_BMCR)
|
|
& PHY_BMCR_RESET);
|
|
if ((phy_sts = pn_phy_readreg(sc, PHY_BMSR)))
|
|
break;
|
|
}
|
|
if (phy_sts) {
|
|
phy_vid = pn_phy_readreg(sc, PHY_VENID);
|
|
phy_did = pn_phy_readreg(sc, PHY_DEVID);
|
|
if (bootverbose)
|
|
printf("pn%d: found PHY at address %d, ",
|
|
sc->pn_unit, sc->pn_phy_addr);
|
|
if (bootverbose)
|
|
printf("vendor id: %x device id: %x\n",
|
|
phy_vid, phy_did);
|
|
p = pn_phys;
|
|
while(p->pn_vid) {
|
|
if (phy_vid == p->pn_vid &&
|
|
(phy_did | 0x000F) == p->pn_did) {
|
|
sc->pn_pinfo = p;
|
|
break;
|
|
}
|
|
p++;
|
|
}
|
|
if (sc->pn_pinfo == NULL)
|
|
sc->pn_pinfo = &pn_phys[PHY_UNKNOWN];
|
|
if (bootverbose)
|
|
printf("pn%d: PHY type: %s\n",
|
|
sc->pn_unit, sc->pn_pinfo->pn_name);
|
|
|
|
pn_getmode_mii(sc);
|
|
if (cold) {
|
|
pn_autoneg_mii(sc, PN_FLAG_FORCEDELAY, 1);
|
|
pn_stop(sc);
|
|
} else {
|
|
pn_init(sc);
|
|
pn_autoneg_mii(sc, PN_FLAG_SCHEDDELAY, 1);
|
|
}
|
|
} else {
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_TX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_100_TX|IFM_HDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia,
|
|
IFM_ETHER|IFM_100_TX|IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_100_T4, 0, NULL);
|
|
ifmedia_add(&sc->ifmedia, IFM_ETHER|IFM_AUTO, 0, NULL);
|
|
pn_init(sc);
|
|
if (cold) {
|
|
pn_autoneg(sc, PN_FLAG_FORCEDELAY, 1);
|
|
pn_stop(sc);
|
|
} else {
|
|
pn_init(sc);
|
|
pn_autoneg(sc, PN_FLAG_SCHEDDELAY, 1);
|
|
}
|
|
}
|
|
|
|
media = sc->ifmedia.ifm_media;
|
|
ifmedia_set(&sc->ifmedia, media);
|
|
|
|
/*
|
|
* Call MI attach routines.
|
|
*/
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp);
|
|
|
|
#if NBPF > 0
|
|
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
|
|
#endif
|
|
|
|
fail:
|
|
splx(s);
|
|
return(error);
|
|
}
|
|
|
|
static int pn_detach(dev)
|
|
device_t dev;
|
|
{
|
|
struct pn_softc *sc;
|
|
struct ifnet *ifp;
|
|
int s;
|
|
|
|
s = splimp();
|
|
|
|
sc = device_get_softc(dev);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
if_detach(ifp);
|
|
pn_stop(sc);
|
|
|
|
bus_teardown_intr(dev, sc->pn_irq, sc->pn_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->pn_res);
|
|
bus_release_resource(dev, PN_RES, PN_RID, sc->pn_res);
|
|
|
|
free(sc->pn_ldata_ptr, M_DEVBUF);
|
|
#ifdef PN_RX_BUG_WAR
|
|
if (sc->pn_rx_war)
|
|
free(sc->pn_rx_buf, M_DEVBUF);
|
|
#endif
|
|
ifmedia_removeall(&sc->ifmedia);
|
|
|
|
splx(s);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
static int pn_list_tx_init(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
struct pn_chain_data *cd;
|
|
struct pn_list_data *ld;
|
|
int i;
|
|
|
|
cd = &sc->pn_cdata;
|
|
ld = sc->pn_ldata;
|
|
for (i = 0; i < PN_TX_LIST_CNT; i++) {
|
|
cd->pn_tx_chain[i].pn_ptr = &ld->pn_tx_list[i];
|
|
if (i == (PN_TX_LIST_CNT - 1))
|
|
cd->pn_tx_chain[i].pn_nextdesc =
|
|
&cd->pn_tx_chain[0];
|
|
else
|
|
cd->pn_tx_chain[i].pn_nextdesc =
|
|
&cd->pn_tx_chain[i + 1];
|
|
}
|
|
|
|
cd->pn_tx_free = &cd->pn_tx_chain[0];
|
|
cd->pn_tx_tail = cd->pn_tx_head = NULL;
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize the RX descriptors and allocate mbufs for them. Note that
|
|
* we arrange the descriptors in a closed ring, so that the last descriptor
|
|
* points back to the first.
|
|
*/
|
|
static int pn_list_rx_init(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
struct pn_chain_data *cd;
|
|
struct pn_list_data *ld;
|
|
int i;
|
|
|
|
cd = &sc->pn_cdata;
|
|
ld = sc->pn_ldata;
|
|
|
|
for (i = 0; i < PN_RX_LIST_CNT; i++) {
|
|
cd->pn_rx_chain[i].pn_ptr =
|
|
(struct pn_desc *)&ld->pn_rx_list[i];
|
|
if (pn_newbuf(sc, &cd->pn_rx_chain[i], NULL) == ENOBUFS)
|
|
return(ENOBUFS);
|
|
if (i == (PN_RX_LIST_CNT - 1)) {
|
|
cd->pn_rx_chain[i].pn_nextdesc = &cd->pn_rx_chain[0];
|
|
ld->pn_rx_list[i].pn_next =
|
|
vtophys(&ld->pn_rx_list[0]);
|
|
} else {
|
|
cd->pn_rx_chain[i].pn_nextdesc = &cd->pn_rx_chain[i + 1];
|
|
ld->pn_rx_list[i].pn_next =
|
|
vtophys(&ld->pn_rx_list[i + 1]);
|
|
}
|
|
}
|
|
|
|
cd->pn_rx_head = &cd->pn_rx_chain[0];
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
* Note: the length fields are only 11 bits wide, which means the
|
|
* largest size we can specify is 2047. This is important because
|
|
* MCLBYTES is 2048, so we have to subtract one otherwise we'll
|
|
* overflow the field and make a mess.
|
|
*/
|
|
static int pn_newbuf(sc, c, m)
|
|
struct pn_softc *sc;
|
|
struct pn_chain_onefrag *c;
|
|
struct mbuf *m;
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
|
|
if (m == NULL) {
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("pn%d: no memory for rx list "
|
|
"-- packet dropped!\n", sc->pn_unit);
|
|
return(ENOBUFS);
|
|
}
|
|
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
printf("pn%d: no memory for rx list -- "
|
|
"packet dropped!\n", sc->pn_unit);
|
|
m_freem(m_new);
|
|
return(ENOBUFS);
|
|
}
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
} else {
|
|
m_new = m;
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
m_new->m_data = m_new->m_ext.ext_buf;
|
|
}
|
|
|
|
/*
|
|
* Leave a couple of empty leading bytes; we'll need them later
|
|
* when we fix up things for proper payload alignment.
|
|
*/
|
|
m_adj(m_new, sizeof(u_int64_t));
|
|
|
|
#ifdef PN_RX_BUG_WAR
|
|
/*
|
|
* Zero the buffer. This is part of the workaround for the
|
|
* promiscuous mode bug in the revision 33 PNIC chips.
|
|
*/
|
|
if (sc->pn_rx_war)
|
|
bzero((char *)mtod(m_new, char *), m_new->m_len);
|
|
#endif
|
|
|
|
c->pn_mbuf = m_new;
|
|
c->pn_ptr->pn_data = vtophys(mtod(m_new, caddr_t));
|
|
c->pn_ptr->pn_ctl = PN_RXCTL_RLINK | PN_RXLEN;
|
|
c->pn_ptr->pn_status = PN_RXSTAT;
|
|
|
|
return(0);
|
|
}
|
|
|
|
#ifdef PN_RX_BUG_WAR
|
|
/*
|
|
* Grrrrr.
|
|
* The PNIC chip has a terrible bug in it that manifests itself during
|
|
* periods of heavy activity. The exact mode of failure if difficult to
|
|
* pinpoint: sometimes it only happens in promiscuous mode, sometimes it
|
|
* will happen on slow machines. The bug is that sometimes instead of
|
|
* uploading one complete frame during reception, it uploads what looks
|
|
* like the entire contents of its FIFO memory. The frame we want is at
|
|
* the end of the whole mess, but we never know exactly how much data has
|
|
* been uploaded, so salvaging the frame is hard.
|
|
*
|
|
* There is only one way to do it reliably, and it's disgusting.
|
|
* Here's what we know:
|
|
*
|
|
* - We know there will always be somewhere between one and three extra
|
|
* descriptors uploaded.
|
|
*
|
|
* - We know the desired received frame will always be at the end of the
|
|
* total data upload.
|
|
*
|
|
* - We know the size of the desired received frame because it will be
|
|
* provided in the length field of the status word in the last descriptor.
|
|
*
|
|
* Here's what we do:
|
|
*
|
|
* - When we allocate buffers for the receive ring, we bzero() them.
|
|
* This means that we know that the buffer contents should be all
|
|
* zeros, except for data uploaded by the chip.
|
|
*
|
|
* - We also force the PNIC chip to upload frames that include the
|
|
* ethernet CRC at the end.
|
|
*
|
|
* - We gather all of the bogus frame data into a single buffer.
|
|
*
|
|
* - We then position a pointer at the end of this buffer and scan
|
|
* backwards until we encounter the first non-zero byte of data.
|
|
* This is the end of the received frame. We know we will encounter
|
|
* some data at the end of the frame because the CRC will always be
|
|
* there, so even if the sender transmits a packet of all zeros,
|
|
* we won't be fooled.
|
|
*
|
|
* - We know the size of the actual received frame, so we subtract
|
|
* that value from the current pointer location. This brings us
|
|
* to the start of the actual received packet.
|
|
*
|
|
* - We copy this into an mbuf and pass it on, along with the actual
|
|
* frame length.
|
|
*
|
|
* The performance hit is tremendous, but it beats dropping frames all
|
|
* the time.
|
|
*/
|
|
|
|
#define PN_WHOLEFRAME (PN_RXSTAT_FIRSTFRAG|PN_RXSTAT_LASTFRAG)
|
|
static void pn_rx_bug_war(sc, cur_rx)
|
|
struct pn_softc *sc;
|
|
struct pn_chain_onefrag *cur_rx;
|
|
{
|
|
struct pn_chain_onefrag *c;
|
|
unsigned char *ptr;
|
|
int total_len;
|
|
u_int32_t rxstat = 0;
|
|
|
|
c = sc->pn_rx_bug_save;
|
|
ptr = sc->pn_rx_buf;
|
|
bzero(ptr, sizeof(PN_RXLEN * 5));
|
|
|
|
/* Copy all the bytes from the bogus buffers. */
|
|
while ((c->pn_ptr->pn_status & PN_WHOLEFRAME) != PN_WHOLEFRAME) {
|
|
rxstat = c->pn_ptr->pn_status;
|
|
m_copydata(c->pn_mbuf, 0, PN_RXLEN, ptr);
|
|
ptr += PN_RXLEN;
|
|
if (c == cur_rx)
|
|
break;
|
|
if (rxstat & PN_RXSTAT_LASTFRAG)
|
|
break;
|
|
c->pn_ptr->pn_status = PN_RXSTAT;
|
|
c->pn_ptr->pn_ctl = PN_RXCTL_RLINK | PN_RXLEN;
|
|
bzero((char *)mtod(c->pn_mbuf, char *), MCLBYTES);
|
|
c = c->pn_nextdesc;
|
|
}
|
|
|
|
/* Find the length of the actual receive frame. */
|
|
total_len = PN_RXBYTES(rxstat);
|
|
|
|
/* Scan backwards until we hit a non-zero byte. */
|
|
while(*ptr == 0x00)
|
|
ptr--;
|
|
|
|
/* Round off. */
|
|
if ((uintptr_t)(ptr) & 0x3)
|
|
ptr -= 1;
|
|
|
|
/* Now find the start of the frame. */
|
|
ptr -= total_len;
|
|
if (ptr < sc->pn_rx_buf)
|
|
ptr = sc->pn_rx_buf;
|
|
|
|
/*
|
|
* Now copy the salvaged frame to the last mbuf and fake up
|
|
* the status word to make it look like a successful
|
|
* frame reception.
|
|
*/
|
|
m_copyback(cur_rx->pn_mbuf, 0, total_len, ptr);
|
|
cur_rx->pn_mbuf->m_len = c->pn_mbuf->m_pkthdr.len = MCLBYTES;
|
|
cur_rx->pn_ptr->pn_status |= PN_RXSTAT_FIRSTFRAG;
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
static void pn_rxeof(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
struct ether_header *eh;
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
struct pn_chain_onefrag *cur_rx;
|
|
int total_len = 0;
|
|
u_int32_t rxstat;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
while(!((rxstat = sc->pn_cdata.pn_rx_head->pn_ptr->pn_status) &
|
|
PN_RXSTAT_OWN)) {
|
|
struct mbuf *m0 = NULL;
|
|
|
|
cur_rx = sc->pn_cdata.pn_rx_head;
|
|
sc->pn_cdata.pn_rx_head = cur_rx->pn_nextdesc;
|
|
|
|
#ifdef PN_RX_BUG_WAR
|
|
/*
|
|
* XXX The PNIC has a nasty receiver bug that manifests
|
|
* under certain conditions (sometimes only in promiscuous
|
|
* mode, sometimes only on slow machines even when not in
|
|
* promiscuous mode). We have to keep an eye out for the
|
|
* failure condition and employ a workaround to recover
|
|
* any mangled frames.
|
|
*/
|
|
if (sc->pn_rx_war) {
|
|
if ((rxstat & PN_WHOLEFRAME) != PN_WHOLEFRAME) {
|
|
if (rxstat & PN_RXSTAT_FIRSTFRAG)
|
|
sc->pn_rx_bug_save = cur_rx;
|
|
if ((rxstat & PN_RXSTAT_LASTFRAG) == 0)
|
|
continue;
|
|
pn_rx_bug_war(sc, cur_rx);
|
|
rxstat = cur_rx->pn_ptr->pn_status;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* If an error occurs, update stats, clear the
|
|
* status word and leave the mbuf cluster in place:
|
|
* it should simply get re-used next time this descriptor
|
|
* comes up in the ring.
|
|
*/
|
|
if (rxstat & PN_RXSTAT_RXERR) {
|
|
ifp->if_ierrors++;
|
|
if (rxstat & PN_RXSTAT_COLLSEEN)
|
|
ifp->if_collisions++;
|
|
pn_newbuf(sc, cur_rx, cur_rx->pn_mbuf);
|
|
continue;
|
|
}
|
|
|
|
/* No errors; receive the packet. */
|
|
m = cur_rx->pn_mbuf;
|
|
total_len = PN_RXBYTES(cur_rx->pn_ptr->pn_status);
|
|
|
|
/* Trim off the CRC. */
|
|
total_len -= ETHER_CRC_LEN;
|
|
|
|
m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
|
|
total_len + ETHER_ALIGN, 0, ifp, NULL);
|
|
pn_newbuf(sc, cur_rx, m);
|
|
if (m0 == NULL) {
|
|
ifp->if_ierrors++;
|
|
continue;
|
|
}
|
|
m_adj(m0, ETHER_ALIGN);
|
|
m = m0;
|
|
ifp->if_ipackets++;
|
|
eh = mtod(m, struct ether_header *);
|
|
|
|
#ifdef BRIDGE
|
|
if (do_bridge) {
|
|
struct ifnet *bdg_ifp;
|
|
bdg_ifp = bridge_in(m);
|
|
if (bdg_ifp != BDG_LOCAL && bdg_ifp != BDG_DROP)
|
|
bdg_forward(&m, bdg_ifp);
|
|
if (((bdg_ifp != BDG_LOCAL) && (bdg_ifp != BDG_BCAST) &&
|
|
(bdg_ifp != BDG_MCAST)) || bdg_ifp == BDG_DROP) {
|
|
m_freem(m);
|
|
continue;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#if NBPF > 0
|
|
/*
|
|
* Handle BPF listeners. Let the BPF user see the packet, but
|
|
* don't pass it up to the ether_input() layer unless it's
|
|
* a broadcast packet, multicast packet, matches our ethernet
|
|
* address or the interface is in promiscuous mode.
|
|
*/
|
|
if (ifp->if_bpf) {
|
|
bpf_mtap(ifp, m);
|
|
if (ifp->if_flags & IFF_PROMISC &&
|
|
(bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
|
|
ETHER_ADDR_LEN) &&
|
|
(eh->ether_dhost[0] & 1) == 0)) {
|
|
m_freem(m);
|
|
continue;
|
|
}
|
|
}
|
|
#endif
|
|
/* Remove header from mbuf and pass it on. */
|
|
m_adj(m, sizeof(struct ether_header));
|
|
ether_input(ifp, eh, m);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
void pn_rxeoc(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
|
|
pn_rxeof(sc);
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_RX_ON);
|
|
CSR_WRITE_4(sc, PN_RXADDR, vtophys(sc->pn_cdata.pn_rx_head->pn_ptr));
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_RX_ON);
|
|
CSR_WRITE_4(sc, PN_RXSTART, 0xFFFFFFFF);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
|
|
static void pn_txeof(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
struct pn_chain *cur_tx;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/* Clear the timeout timer. */
|
|
ifp->if_timer = 0;
|
|
|
|
if (sc->pn_cdata.pn_tx_head == NULL)
|
|
return;
|
|
|
|
/*
|
|
* Go through our tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
while(sc->pn_cdata.pn_tx_head->pn_mbuf != NULL) {
|
|
u_int32_t txstat;
|
|
|
|
cur_tx = sc->pn_cdata.pn_tx_head;
|
|
txstat = PN_TXSTATUS(cur_tx);
|
|
|
|
if (txstat & PN_TXSTAT_OWN)
|
|
break;
|
|
|
|
if (txstat & PN_TXSTAT_ERRSUM) {
|
|
ifp->if_oerrors++;
|
|
if (txstat & PN_TXSTAT_EXCESSCOLL)
|
|
ifp->if_collisions++;
|
|
if (txstat & PN_TXSTAT_LATECOLL)
|
|
ifp->if_collisions++;
|
|
}
|
|
|
|
ifp->if_collisions += (txstat & PN_TXSTAT_COLLCNT) >> 3;
|
|
|
|
|
|
ifp->if_opackets++;
|
|
m_freem(cur_tx->pn_mbuf);
|
|
cur_tx->pn_mbuf = NULL;
|
|
|
|
if (sc->pn_cdata.pn_tx_head == sc->pn_cdata.pn_tx_tail) {
|
|
sc->pn_cdata.pn_tx_head = NULL;
|
|
sc->pn_cdata.pn_tx_tail = NULL;
|
|
break;
|
|
}
|
|
|
|
sc->pn_cdata.pn_tx_head = cur_tx->pn_nextdesc;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* TX 'end of channel' interrupt handler.
|
|
*/
|
|
static void pn_txeoc(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
ifp->if_timer = 0;
|
|
|
|
if (sc->pn_cdata.pn_tx_head == NULL) {
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
sc->pn_cdata.pn_tx_tail = NULL;
|
|
if (sc->pn_want_auto) {
|
|
if (sc->pn_pinfo == NULL)
|
|
pn_autoneg(sc, PN_FLAG_SCHEDDELAY, 1);
|
|
else
|
|
pn_autoneg_mii(sc, PN_FLAG_SCHEDDELAY, 1);
|
|
}
|
|
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void pn_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct pn_softc *sc;
|
|
struct ifnet *ifp;
|
|
u_int32_t status;
|
|
|
|
sc = arg;
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/* Supress unwanted interrupts. */
|
|
if (!(ifp->if_flags & IFF_UP)) {
|
|
pn_stop(sc);
|
|
return;
|
|
}
|
|
|
|
/* Disable interrupts. */
|
|
CSR_WRITE_4(sc, PN_IMR, 0x00000000);
|
|
|
|
for (;;) {
|
|
status = CSR_READ_4(sc, PN_ISR);
|
|
if (status)
|
|
CSR_WRITE_4(sc, PN_ISR, status);
|
|
|
|
if ((status & PN_INTRS) == 0)
|
|
break;
|
|
|
|
if (status & PN_ISR_RX_OK)
|
|
pn_rxeof(sc);
|
|
|
|
if ((status & PN_ISR_RX_WATCHDOG) || (status & PN_ISR_RX_IDLE)
|
|
|| (status & PN_ISR_RX_NOBUF))
|
|
pn_rxeoc(sc);
|
|
|
|
if (status & PN_ISR_TX_OK)
|
|
pn_txeof(sc);
|
|
|
|
if (status & PN_ISR_TX_NOBUF)
|
|
pn_txeoc(sc);
|
|
|
|
if (status & PN_ISR_TX_IDLE) {
|
|
pn_txeof(sc);
|
|
if (sc->pn_cdata.pn_tx_head != NULL) {
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_TX_ON);
|
|
CSR_WRITE_4(sc, PN_TXSTART, 0xFFFFFFFF);
|
|
}
|
|
}
|
|
|
|
if (status & PN_ISR_TX_UNDERRUN) {
|
|
ifp->if_oerrors++;
|
|
pn_txeof(sc);
|
|
if (sc->pn_cdata.pn_tx_head != NULL) {
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_TX_ON);
|
|
CSR_WRITE_4(sc, PN_TXSTART, 0xFFFFFFFF);
|
|
}
|
|
}
|
|
|
|
if (status & PN_ISR_BUS_ERR) {
|
|
pn_reset(sc);
|
|
pn_init(sc);
|
|
}
|
|
}
|
|
|
|
/* Re-enable interrupts. */
|
|
CSR_WRITE_4(sc, PN_IMR, PN_INTRS);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL) {
|
|
pn_start(ifp);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
|
|
* pointers to the fragment pointers.
|
|
*/
|
|
static int pn_encap(sc, c, m_head)
|
|
struct pn_softc *sc;
|
|
struct pn_chain *c;
|
|
struct mbuf *m_head;
|
|
{
|
|
int frag = 0;
|
|
struct pn_desc *f = NULL;
|
|
int total_len;
|
|
struct mbuf *m;
|
|
|
|
/*
|
|
* Start packing the mbufs in this chain into
|
|
* the fragment pointers. Stop when we run out
|
|
* of fragments or hit the end of the mbuf chain.
|
|
*/
|
|
m = m_head;
|
|
total_len = 0;
|
|
|
|
for (m = m_head, frag = 0; m != NULL; m = m->m_next) {
|
|
if (m->m_len != 0) {
|
|
if (frag == PN_MAXFRAGS)
|
|
break;
|
|
total_len += m->m_len;
|
|
f = &c->pn_ptr->pn_frag[frag];
|
|
f->pn_ctl = PN_TXCTL_TLINK | m->m_len;
|
|
if (frag == 0) {
|
|
f->pn_ctl |= PN_TXCTL_FIRSTFRAG;
|
|
f->pn_status = 0;
|
|
} else
|
|
f->pn_status = PN_TXSTAT_OWN;
|
|
f->pn_data = vtophys(mtod(m, vm_offset_t));
|
|
f->pn_next = vtophys(&c->pn_ptr->pn_frag[frag + 1]);
|
|
frag++;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle special case: we used up all 16 fragments,
|
|
* but we have more mbufs left in the chain. Copy the
|
|
* data into an mbuf cluster. Note that we don't
|
|
* bother clearing the values in the other fragment
|
|
* pointers/counters; it wouldn't gain us anything,
|
|
* and would waste cycles.
|
|
*/
|
|
if (m != NULL) {
|
|
struct mbuf *m_new = NULL;
|
|
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("pn%d: no memory for tx list", sc->pn_unit);
|
|
return(1);
|
|
}
|
|
if (m_head->m_pkthdr.len > MHLEN) {
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
m_freem(m_new);
|
|
printf("pn%d: no memory for tx list",
|
|
sc->pn_unit);
|
|
return(1);
|
|
}
|
|
}
|
|
m_copydata(m_head, 0, m_head->m_pkthdr.len,
|
|
mtod(m_new, caddr_t));
|
|
m_new->m_pkthdr.len = m_new->m_len = m_head->m_pkthdr.len;
|
|
m_freem(m_head);
|
|
m_head = m_new;
|
|
f = &c->pn_ptr->pn_frag[0];
|
|
f->pn_data = vtophys(mtod(m_new, caddr_t));
|
|
f->pn_ctl = total_len = m_new->m_len;
|
|
f->pn_ctl |= PN_TXCTL_TLINK|PN_TXCTL_FIRSTFRAG;
|
|
frag = 1;
|
|
}
|
|
|
|
|
|
c->pn_mbuf = m_head;
|
|
c->pn_lastdesc = frag - 1;
|
|
PN_TXCTL(c) |= PN_TXCTL_LASTFRAG|PN_TXCTL_FINT;
|
|
PN_TXNEXT(c) = vtophys(&c->pn_nextdesc->pn_ptr->pn_frag[0]);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine. To avoid having to do mbuf copies, we put pointers
|
|
* to the mbuf data regions directly in the transmit lists. We also save a
|
|
* copy of the pointers since the transmit list fragment pointers are
|
|
* physical addresses.
|
|
*/
|
|
|
|
static void pn_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct pn_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
struct pn_chain *cur_tx = NULL, *start_tx;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
if (sc->pn_autoneg) {
|
|
sc->pn_tx_pend = 1;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Check for an available queue slot. If there are none,
|
|
* punt.
|
|
*/
|
|
if (sc->pn_cdata.pn_tx_free->pn_mbuf != NULL) {
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
return;
|
|
}
|
|
|
|
start_tx = sc->pn_cdata.pn_tx_free;
|
|
|
|
while(sc->pn_cdata.pn_tx_free->pn_mbuf == NULL) {
|
|
IF_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
/* Pick a descriptor off the free list. */
|
|
cur_tx = sc->pn_cdata.pn_tx_free;
|
|
sc->pn_cdata.pn_tx_free = cur_tx->pn_nextdesc;
|
|
|
|
/* Pack the data into the descriptor. */
|
|
pn_encap(sc, cur_tx, m_head);
|
|
|
|
if (cur_tx != start_tx)
|
|
PN_TXOWN(cur_tx) = PN_TXSTAT_OWN;
|
|
|
|
#if NBPF > 0
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, cur_tx->pn_mbuf);
|
|
#endif
|
|
PN_TXOWN(cur_tx) = PN_TXSTAT_OWN;
|
|
CSR_WRITE_4(sc, PN_TXSTART, 0xFFFFFFFF);
|
|
}
|
|
|
|
/*
|
|
* If there are no packets queued, bail.
|
|
*/
|
|
if (cur_tx == NULL)
|
|
return;
|
|
|
|
sc->pn_cdata.pn_tx_tail = cur_tx;
|
|
|
|
if (sc->pn_cdata.pn_tx_head == NULL)
|
|
sc->pn_cdata.pn_tx_head = start_tx;
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
ifp->if_timer = 5;
|
|
|
|
return;
|
|
}
|
|
|
|
static void pn_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct pn_softc *sc = xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
u_int16_t phy_bmcr = 0;
|
|
int s;
|
|
|
|
if (sc->pn_autoneg)
|
|
return;
|
|
|
|
s = splimp();
|
|
|
|
if (sc->pn_pinfo != NULL)
|
|
phy_bmcr = pn_phy_readreg(sc, PHY_BMCR);
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
pn_stop(sc);
|
|
pn_reset(sc);
|
|
|
|
/*
|
|
* Set cache alignment and burst length.
|
|
*/
|
|
CSR_WRITE_4(sc, PN_BUSCTL, PN_BUSCTL_MUSTBEONE|PN_BUSCTL_ARBITRATION);
|
|
PN_SETBIT(sc, PN_BUSCTL, PN_BURSTLEN_16LONG);
|
|
switch(sc->pn_cachesize) {
|
|
case 32:
|
|
PN_SETBIT(sc, PN_BUSCTL, PN_CACHEALIGN_32LONG);
|
|
break;
|
|
case 16:
|
|
PN_SETBIT(sc, PN_BUSCTL, PN_CACHEALIGN_16LONG);
|
|
break;
|
|
case 8:
|
|
PN_SETBIT(sc, PN_BUSCTL, PN_CACHEALIGN_8LONG);
|
|
break;
|
|
case 0:
|
|
default:
|
|
PN_SETBIT(sc, PN_BUSCTL, PN_CACHEALIGN_NONE);
|
|
break;
|
|
}
|
|
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_TX_IMMEDIATE);
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_NO_RXCRC);
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_HEARTBEAT);
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_STORENFWD);
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_TX_BACKOFF);
|
|
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_TX_THRESH);
|
|
PN_SETBIT(sc, PN_NETCFG, PN_TXTHRESH_72BYTES);
|
|
|
|
if (sc->pn_pinfo == NULL) {
|
|
PN_CLRBIT(sc, PN_NETCFG, PN_NETCFG_MIIENB);
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_TX_BACKOFF);
|
|
} else {
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_MIIENB);
|
|
PN_SETBIT(sc, PN_ENDEC, PN_ENDEC_JABBERDIS);
|
|
}
|
|
|
|
pn_setcfg(sc, sc->ifmedia.ifm_media);
|
|
|
|
/* Init circular RX list. */
|
|
if (pn_list_rx_init(sc) == ENOBUFS) {
|
|
printf("pn%d: initialization failed: no "
|
|
"memory for rx buffers\n", sc->pn_unit);
|
|
pn_stop(sc);
|
|
(void)splx(s);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Init tx descriptors.
|
|
*/
|
|
pn_list_tx_init(sc);
|
|
|
|
/*
|
|
* Load the address of the RX list.
|
|
*/
|
|
CSR_WRITE_4(sc, PN_RXADDR, vtophys(sc->pn_cdata.pn_rx_head->pn_ptr));
|
|
|
|
/*
|
|
* Load the RX/multicast filter.
|
|
*/
|
|
pn_setfilt(sc);
|
|
|
|
/*
|
|
* Enable interrupts.
|
|
*/
|
|
CSR_WRITE_4(sc, PN_IMR, PN_INTRS);
|
|
CSR_WRITE_4(sc, PN_ISR, 0xFFFFFFFF);
|
|
|
|
/* Enable receiver and transmitter. */
|
|
PN_SETBIT(sc, PN_NETCFG, PN_NETCFG_TX_ON|PN_NETCFG_RX_ON);
|
|
CSR_WRITE_4(sc, PN_RXSTART, 0xFFFFFFFF);
|
|
|
|
/* Restore state of BMCR */
|
|
if (sc->pn_pinfo != NULL)
|
|
pn_phy_writereg(sc, PHY_BMCR, phy_bmcr);
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
(void)splx(s);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int pn_ifmedia_upd(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct pn_softc *sc;
|
|
struct ifmedia *ifm;
|
|
|
|
sc = ifp->if_softc;
|
|
ifm = &sc->ifmedia;
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return(EINVAL);
|
|
|
|
if (IFM_SUBTYPE(ifm->ifm_media) == IFM_AUTO) {
|
|
if (sc->pn_pinfo == NULL)
|
|
pn_autoneg(sc, PN_FLAG_SCHEDDELAY, 1);
|
|
else
|
|
pn_autoneg_mii(sc, PN_FLAG_SCHEDDELAY, 1);
|
|
} else {
|
|
if (sc->pn_pinfo == NULL)
|
|
pn_setmode(sc, ifm->ifm_media);
|
|
else
|
|
pn_setmode_mii(sc, ifm->ifm_media);
|
|
}
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void pn_ifmedia_sts(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct pn_softc *sc;
|
|
u_int16_t advert = 0, ability = 0;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (sc->pn_pinfo == NULL) {
|
|
if (CSR_READ_4(sc, PN_NETCFG) & PN_NETCFG_SPEEDSEL)
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_T;
|
|
else
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_TX;
|
|
if (CSR_READ_4(sc, PN_NETCFG) & PN_NETCFG_FULLDUPLEX)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
return;
|
|
}
|
|
|
|
if (!(pn_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_AUTONEGENBL)) {
|
|
if (pn_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_SPEEDSEL)
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_TX;
|
|
else
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_T;
|
|
if (pn_phy_readreg(sc, PHY_BMCR) & PHY_BMCR_DUPLEX)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
else
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
return;
|
|
}
|
|
|
|
ability = pn_phy_readreg(sc, PHY_LPAR);
|
|
advert = pn_phy_readreg(sc, PHY_ANAR);
|
|
if (advert & PHY_ANAR_100BT4 &&
|
|
ability & PHY_ANAR_100BT4) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_T4;
|
|
} else if (advert & PHY_ANAR_100BTXFULL &&
|
|
ability & PHY_ANAR_100BTXFULL) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_TX|IFM_FDX;
|
|
} else if (advert & PHY_ANAR_100BTXHALF &&
|
|
ability & PHY_ANAR_100BTXHALF) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_100_TX|IFM_HDX;
|
|
} else if (advert & PHY_ANAR_10BTFULL &&
|
|
ability & PHY_ANAR_10BTFULL) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_T|IFM_FDX;
|
|
} else if (advert & PHY_ANAR_10BTHALF &&
|
|
ability & PHY_ANAR_10BTHALF) {
|
|
ifmr->ifm_active = IFM_ETHER|IFM_10_T|IFM_HDX;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int pn_ioctl(ifp, command, data)
|
|
struct ifnet *ifp;
|
|
u_long command;
|
|
caddr_t data;
|
|
{
|
|
struct pn_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
int s, error = 0;
|
|
|
|
s = splimp();
|
|
|
|
switch(command) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
pn_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
pn_stop(sc);
|
|
}
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
pn_init(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->ifmedia, command);
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
(void)splx(s);
|
|
|
|
return(error);
|
|
}
|
|
|
|
static void pn_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct pn_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
if (sc->pn_autoneg) {
|
|
if (sc->pn_pinfo == NULL)
|
|
pn_autoneg(sc, PN_FLAG_DELAYTIMEO, 1);
|
|
else
|
|
pn_autoneg_mii(sc, PN_FLAG_DELAYTIMEO, 1);
|
|
if (!(ifp->if_flags & IFF_UP))
|
|
pn_stop(sc);
|
|
return;
|
|
}
|
|
|
|
ifp->if_oerrors++;
|
|
printf("pn%d: watchdog timeout\n", sc->pn_unit);
|
|
|
|
if (!(pn_phy_readreg(sc, PHY_BMSR) & PHY_BMSR_LINKSTAT))
|
|
printf("pn%d: no carrier - transceiver cable problem?\n",
|
|
sc->pn_unit);
|
|
pn_stop(sc);
|
|
pn_reset(sc);
|
|
pn_init(sc);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
pn_start(ifp);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void pn_stop(sc)
|
|
struct pn_softc *sc;
|
|
{
|
|
register int i;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_timer = 0;
|
|
|
|
PN_CLRBIT(sc, PN_NETCFG, (PN_NETCFG_RX_ON|PN_NETCFG_TX_ON));
|
|
CSR_WRITE_4(sc, PN_IMR, 0x00000000);
|
|
CSR_WRITE_4(sc, PN_TXADDR, 0x00000000);
|
|
CSR_WRITE_4(sc, PN_RXADDR, 0x00000000);
|
|
|
|
/*
|
|
* Free data in the RX lists.
|
|
*/
|
|
for (i = 0; i < PN_RX_LIST_CNT; i++) {
|
|
if (sc->pn_cdata.pn_rx_chain[i].pn_mbuf != NULL) {
|
|
m_freem(sc->pn_cdata.pn_rx_chain[i].pn_mbuf);
|
|
sc->pn_cdata.pn_rx_chain[i].pn_mbuf = NULL;
|
|
}
|
|
}
|
|
bzero((char *)&sc->pn_ldata->pn_rx_list,
|
|
sizeof(sc->pn_ldata->pn_rx_list));
|
|
|
|
/*
|
|
* Free the TX list buffers.
|
|
*/
|
|
for (i = 0; i < PN_TX_LIST_CNT; i++) {
|
|
if (sc->pn_cdata.pn_tx_chain[i].pn_mbuf != NULL) {
|
|
m_freem(sc->pn_cdata.pn_tx_chain[i].pn_mbuf);
|
|
sc->pn_cdata.pn_tx_chain[i].pn_mbuf = NULL;
|
|
}
|
|
}
|
|
|
|
bzero((char *)&sc->pn_ldata->pn_tx_list,
|
|
sizeof(sc->pn_ldata->pn_tx_list));
|
|
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static void pn_shutdown(dev)
|
|
device_t dev;
|
|
{
|
|
struct pn_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
pn_stop(sc);
|
|
|
|
return;
|
|
}
|