freebsd/sys/i386/isa/sound/sb_midi.c

/*
 * sound/sb_dsp.c
 * 
 * The low level driver for the SoundBlaster DS chips.
 * 
 * Copyright by Hannu Savolainen 1993
 * 
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met: 1. Redistributions of source code must retain the above copyright
 * notice, this list of conditions and the following disclaimer. 2.
 * Redistributions in binary form must reproduce the above copyright notice,
 * this list of conditions and the following disclaimer in the documentation
 * and/or other materials provided with the distribution.
 * 
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND ANY
 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 * 
 */

#include <i386/isa/sound/sound_config.h>

#if (NSND > 0) && defined(CONFIG_SB) && defined(CONFIG_MIDI)

#include <i386/isa/sound/sbcard.h>
#undef SB_TEST_IRQ

/*
 * The DSP channel can be used either for input or output. Variable
 * 'sb_irq_mode' will be set when the program calls read or write first time
 * after open. Current version doesn't support mode changes without closing
 * and reopening the device. Support for this feature may be implemented in a
 * future version of this driver.
 */

extern int      sb_dsp_ok;	/* Set to 1 atfer successful initialization */
extern int      sbc_base;

extern int      sb_midi_mode;
extern int      sb_midi_busy;	/* 1 if the process has output to MIDI */
extern int      sb_dsp_busy;
extern int      sb_dsp_highspeed;

extern volatile int sb_irq_mode;
extern int      sb_duplex_midi;
extern int      sb_intr_active;
static int      input_opened = 0;
static int      my_dev;

extern sound_os_info *sb_osp;

static void            (*midi_input_intr) (int dev, u_char data);

static int
sb_midi_open(int dev, int mode, void (*input) (int dev, u_char data),
	     void (*output) (int dev))
{
    int             ret;

    if (!sb_dsp_ok) {
	printf("SB Error: MIDI hardware not installed\n");
	return -(ENXIO);
    }
    if (sb_midi_busy)
	return -(EBUSY);

    if (mode != OPEN_WRITE && !sb_duplex_midi) {
	if (num_midis == 1)
	    printf("SoundBlaster: Midi input not currently supported\n");
	return -(EPERM);
    }
    sb_midi_mode = NORMAL_MIDI;
    if (mode != OPEN_WRITE) {
	if (sb_dsp_busy || sb_intr_active)
	    return -(EBUSY);
	sb_midi_mode = UART_MIDI;
    }
    if (sb_dsp_highspeed) {
	printf("SB Error: Midi output not possible during stereo or high speed audio\n");
	return -(EBUSY);
    }
    if (sb_midi_mode == UART_MIDI) {
	sb_irq_mode = IMODE_MIDI;

	sb_reset_dsp();

	if (!sb_dsp_command(0x35))
	    return -(EIO);	/* Enter the UART mode */
	sb_intr_active = 1;

	input_opened = 1;
	midi_input_intr = input;
    }
    sb_midi_busy = 1;

    return 0;
}

static void
sb_midi_close(int dev)
{
    if (sb_midi_mode == UART_MIDI) {
	sb_reset_dsp();	/* The only way to kill the UART mode */
    }
    sb_intr_active = 0;
    sb_midi_busy = 0;
    input_opened = 0;
}

static int
sb_midi_out(int dev, u_char midi_byte)
{
    u_long   flags;

    if (sb_midi_mode == NORMAL_MIDI) {
	flags = splhigh();
	if (sb_dsp_command(0x38))
	    sb_dsp_command(midi_byte);
	else
	    printf("SB Error: Unable to send a MIDI byte\n");
	splx(flags);
    } else
	sb_dsp_command(midi_byte);	/* UART write */

    return 1;
}

static int
sb_midi_start_read(int dev)
{
    if (sb_midi_mode != UART_MIDI) {
	printf("SoundBlaster: MIDI input not implemented.\n");
	return -(EPERM);
    }
    return 0;
}

static int
sb_midi_end_read(int dev)
{
    if (sb_midi_mode == UART_MIDI) {
	sb_reset_dsp();
	sb_intr_active = 0;
    }
    return 0;
}

static int
sb_midi_ioctl(int dev, u_int cmd, ioctl_arg arg)
{
    return -(EPERM);
}

void
sb_midi_interrupt(int dummy)
{
    u_long   flags;
    u_char   data;

    flags = splhigh();

    data = inb(DSP_READ);
    if (input_opened)
	midi_input_intr(my_dev, data);

    splx(flags);
}

#define MIDI_SYNTH_NAME	"SoundBlaster Midi"
#define MIDI_SYNTH_CAPS	0
#include <i386/isa/sound/midi_synth.h>

static struct midi_operations sb_midi_operations =
{
	{"SoundBlaster", 0, 0, SNDCARD_SB},
	&std_midi_synth,
	{0},
	sb_midi_open,
	sb_midi_close,
	sb_midi_ioctl,
	sb_midi_out,
	sb_midi_start_read,
	sb_midi_end_read,
	NULL,			/* Kick */
	NULL,			/* command */
	NULL,			/* buffer_status */
	NULL
};

void
sb_midi_init(int model)
{
    if (num_midis >= MAX_MIDI_DEV) {
	printf("Sound: Too many midi devices detected\n");
	return;
    }
    std_midi_synth.midi_dev = num_midis;
    my_dev = num_midis;
    midi_devs[num_midis++] = &sb_midi_operations;
}

#endif