1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-20 11:11:24 +00:00
freebsd/sys/geom/vinum/geom_vinum_state.c
Ulf Lilleengen c0b9797aa8 Import the gvinum work that have been done during and after Summer of Code 2007.
The work have been under testing and fixing since then, and it is mature enough
to be put into HEAD for further testing.

A lot have changed in this time, and here are the most important:
- Gvinum now uses one single workerthread instead of one thread for each
  volume and each plex. The reason for this is that the previous scheme was
  very complex, and was the cause of many of the bugs discovered in gvinum.
  Instead, gvinum now uses one worker thread with an event queue, quite
  similar to what used in gmirror.
- The rebuild/grow/initialize/parity check routines no longer runs in
  separate threads, but are run as regular I/O requests with special flags.
  This made it easier to support mounted growing and parity rebuild.
- Support for growing striped and raid5-plexes, meaning that one can extend the
  volumes for these plex types in addition to the concat type. Also works while
  the volume is mounted.
- Implementation of many of the missing commands from the old vinum:
  attach/detach, start (was partially implemented), stop (was partially
  implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes
  with one plex of these organizations).
- The parity check and rebuild no longer goes between userland/kernel, meaning
  that the gvinum command will not stay and wait forever for the rebuild to
  finish. You can instead watch the status with the list command.
- Many problems with gvinum have been reported since 5.x, and some has been hard
  to fix due to the complicated architecture. Hopefully, it should be more
  stable and better handle edge cases that previously made gvinum crash.
- Failed drives no longer disappears entirely, but now leave behind a dummy
  drive that makes sure the original state is not forgotten in case the system
  is rebooted between drive failures/swaps.
- Update manpage to reflect new commands and extend it with some examples.

Sponsored by:   Google Summer of Code 2007
Mentored by:    le
Tested by:      Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00

535 lines
12 KiB
C

/*-
* Copyright (c) 2004, 2007 Lukas Ertl
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/libkern.h>
#include <sys/malloc.h>
#include <geom/geom.h>
#include <geom/vinum/geom_vinum_var.h>
#include <geom/vinum/geom_vinum.h>
#include <geom/vinum/geom_vinum_share.h>
void
gv_setstate(struct g_geom *gp, struct gctl_req *req)
{
struct gv_softc *sc;
struct gv_sd *s;
struct gv_drive *d;
struct gv_volume *v;
struct gv_plex *p;
char *obj, *state;
int f, *flags, type;
f = 0;
obj = gctl_get_param(req, "object", NULL);
if (obj == NULL) {
gctl_error(req, "no object given");
return;
}
state = gctl_get_param(req, "state", NULL);
if (state == NULL) {
gctl_error(req, "no state given");
return;
}
flags = gctl_get_paraml(req, "flags", sizeof(*flags));
if (flags == NULL) {
gctl_error(req, "no flags given");
return;
}
if (*flags & GV_FLAG_F)
f = GV_SETSTATE_FORCE;
sc = gp->softc;
type = gv_object_type(sc, obj);
switch (type) {
case GV_TYPE_VOL:
if (gv_volstatei(state) < 0) {
gctl_error(req, "invalid volume state '%s'", state);
break;
}
v = gv_find_vol(sc, obj);
gv_post_event(sc, GV_EVENT_SET_VOL_STATE, v, NULL,
gv_volstatei(state), f);
break;
case GV_TYPE_PLEX:
if (gv_plexstatei(state) < 0) {
gctl_error(req, "invalid plex state '%s'", state);
break;
}
p = gv_find_plex(sc, obj);
gv_post_event(sc, GV_EVENT_SET_PLEX_STATE, p, NULL,
gv_plexstatei(state), f);
break;
case GV_TYPE_SD:
if (gv_sdstatei(state) < 0) {
gctl_error(req, "invalid subdisk state '%s'", state);
break;
}
s = gv_find_sd(sc, obj);
gv_post_event(sc, GV_EVENT_SET_SD_STATE, s, NULL,
gv_sdstatei(state), f);
break;
case GV_TYPE_DRIVE:
if (gv_drivestatei(state) < 0) {
gctl_error(req, "invalid drive state '%s'", state);
break;
}
d = gv_find_drive(sc, obj);
gv_post_event(sc, GV_EVENT_SET_DRIVE_STATE, d, NULL,
gv_drivestatei(state), f);
break;
default:
gctl_error(req, "unknown object '%s'", obj);
break;
}
}
/* Update drive state; return 0 if the state changes, otherwise error. */
int
gv_set_drive_state(struct gv_drive *d, int newstate, int flags)
{
struct gv_sd *s;
int oldstate;
KASSERT(d != NULL, ("gv_set_drive_state: NULL d"));
oldstate = d->state;
if (newstate == oldstate)
return (0);
/* We allow to take down an open drive only with force. */
if ((newstate == GV_DRIVE_DOWN) && gv_consumer_is_open(d->consumer) &&
(!(flags & GV_SETSTATE_FORCE)))
return (GV_ERR_ISBUSY);
d->state = newstate;
if (d->state != oldstate) {
LIST_FOREACH(s, &d->subdisks, from_drive)
gv_update_sd_state(s);
}
/* Save the config back to disk. */
if (flags & GV_SETSTATE_CONFIG)
gv_save_config(d->vinumconf);
return (0);
}
int
gv_set_sd_state(struct gv_sd *s, int newstate, int flags)
{
struct gv_drive *d;
struct gv_plex *p;
int oldstate, status;
KASSERT(s != NULL, ("gv_set_sd_state: NULL s"));
oldstate = s->state;
/* We are optimistic and assume it will work. */
status = 0;
if (newstate == oldstate)
return (0);
switch (newstate) {
case GV_SD_DOWN:
/*
* If we're attached to a plex, we won't go down without use of
* force.
*/
if ((s->plex_sc != NULL) && !(flags & GV_SETSTATE_FORCE))
return (GV_ERR_ISATTACHED);
break;
case GV_SD_REVIVING:
case GV_SD_INITIALIZING:
/*
* Only do this if we're forced, since it usually is done
* internally, and then we do use the force flag.
*/
if (!flags & GV_SETSTATE_FORCE)
return (GV_ERR_SETSTATE);
break;
case GV_SD_UP:
/* We can't bring the subdisk up if our drive is dead. */
d = s->drive_sc;
if ((d == NULL) || (d->state != GV_DRIVE_UP))
return (GV_ERR_SETSTATE);
/* Check from where we want to be brought up. */
switch (s->state) {
case GV_SD_REVIVING:
case GV_SD_INITIALIZING:
/*
* The subdisk was initializing. We allow it to be
* brought up.
*/
break;
case GV_SD_DOWN:
/*
* The subdisk is currently down. We allow it to be
* brought up if it is not attached to a plex.
*/
p = s->plex_sc;
if (p == NULL)
break;
/*
* If this subdisk is attached to a plex, we allow it
* to be brought up if the plex if it's not a RAID5
* plex, otherwise it's made 'stale'.
*/
if (p->org != GV_PLEX_RAID5)
break;
else if (s->flags & GV_SD_CANGOUP) {
s->flags &= ~GV_SD_CANGOUP;
break;
} else if (flags & GV_SETSTATE_FORCE)
break;
else
s->state = GV_SD_STALE;
status = GV_ERR_SETSTATE;
break;
case GV_SD_STALE:
/*
* A stale subdisk can be brought up only if it's part
* of a concat or striped plex that's the only one in a
* volume, or if the subdisk isn't attached to a plex.
* Otherwise it needs to be revived or initialized
* first.
*/
p = s->plex_sc;
if (p == NULL || flags & GV_SETSTATE_FORCE)
break;
if ((p->org != GV_PLEX_RAID5 &&
p->vol_sc->plexcount == 1) ||
(p->flags & GV_PLEX_SYNCING &&
p->synced > 0 &&
p->org == GV_PLEX_RAID5))
break;
else
return (GV_ERR_SETSTATE);
default:
return (GV_ERR_INVSTATE);
}
break;
/* Other state transitions are only possible with force. */
default:
if (!(flags & GV_SETSTATE_FORCE))
return (GV_ERR_SETSTATE);
}
/* We can change the state and do it. */
if (status == 0)
s->state = newstate;
/* Update our plex, if we're attached to one. */
if (s->plex_sc != NULL)
gv_update_plex_state(s->plex_sc);
/* Save the config back to disk. */
if (flags & GV_SETSTATE_CONFIG)
gv_save_config(s->vinumconf);
return (status);
}
int
gv_set_plex_state(struct gv_plex *p, int newstate, int flags)
{
struct gv_volume *v;
int oldstate, plexdown;
KASSERT(p != NULL, ("gv_set_plex_state: NULL p"));
oldstate = p->state;
v = p->vol_sc;
plexdown = 0;
if (newstate == oldstate)
return (0);
switch (newstate) {
case GV_PLEX_UP:
/* Let update_plex handle if the plex can come up */
gv_update_plex_state(p);
if (p->state != GV_PLEX_UP && !(flags & GV_SETSTATE_FORCE))
return (GV_ERR_SETSTATE);
p->state = newstate;
break;
case GV_PLEX_DOWN:
/*
* Set state to GV_PLEX_DOWN only if no-one is using the plex,
* or if the state is forced.
*/
if (v != NULL) {
/* If the only one up, force is needed. */
plexdown = gv_plexdown(v);
if ((v->plexcount == 1 ||
(v->plexcount - plexdown == 1)) &&
((flags & GV_SETSTATE_FORCE) == 0))
return (GV_ERR_SETSTATE);
}
p->state = newstate;
break;
case GV_PLEX_DEGRADED:
/* Only used internally, so we have to be forced. */
if (flags & GV_SETSTATE_FORCE)
p->state = newstate;
break;
}
/* Update our volume if we have one. */
if (v != NULL)
gv_update_vol_state(v);
/* Save config. */
if (flags & GV_SETSTATE_CONFIG)
gv_save_config(p->vinumconf);
return (0);
}
int
gv_set_vol_state(struct gv_volume *v, int newstate, int flags)
{
int oldstate;
KASSERT(v != NULL, ("gv_set_vol_state: NULL v"));
oldstate = v->state;
if (newstate == oldstate)
return (0);
switch (newstate) {
case GV_VOL_UP:
/* Let update handle if the volume can come up. */
gv_update_vol_state(v);
if (v->state != GV_VOL_UP && !(flags & GV_SETSTATE_FORCE))
return (GV_ERR_SETSTATE);
v->state = newstate;
break;
case GV_VOL_DOWN:
/*
* Set state to GV_VOL_DOWN only if no-one is using the volume,
* or if the state should be forced.
*/
if (!gv_provider_is_open(v->provider) &&
!(flags & GV_SETSTATE_FORCE))
return (GV_ERR_ISBUSY);
v->state = newstate;
break;
}
/* Save config */
if (flags & GV_SETSTATE_CONFIG)
gv_save_config(v->vinumconf);
return (0);
}
/* Update the state of a subdisk based on its environment. */
void
gv_update_sd_state(struct gv_sd *s)
{
struct gv_drive *d;
int oldstate;
KASSERT(s != NULL, ("gv_update_sd_state: NULL s"));
d = s->drive_sc;
KASSERT(d != NULL, ("gv_update_sd_state: NULL d"));
oldstate = s->state;
/* If our drive isn't up we cannot be up either. */
if (d->state != GV_DRIVE_UP) {
s->state = GV_SD_DOWN;
/* If this subdisk was just created, we assume it is good.*/
} else if (s->flags & GV_SD_NEWBORN) {
s->state = GV_SD_UP;
s->flags &= ~GV_SD_NEWBORN;
} else if (s->state != GV_SD_UP) {
if (s->flags & GV_SD_CANGOUP) {
s->state = GV_SD_UP;
s->flags &= ~GV_SD_CANGOUP;
} else
s->state = GV_SD_STALE;
} else
s->state = GV_SD_UP;
if (s->state != oldstate)
G_VINUM_DEBUG(1, "subdisk %s state change: %s -> %s", s->name,
gv_sdstate(oldstate), gv_sdstate(s->state));
/* Update the plex, if we have one. */
if (s->plex_sc != NULL)
gv_update_plex_state(s->plex_sc);
}
/* Update the state of a plex based on its environment. */
void
gv_update_plex_state(struct gv_plex *p)
{
struct gv_sd *s;
int sdstates;
int oldstate;
KASSERT(p != NULL, ("gv_update_plex_state: NULL p"));
oldstate = p->state;
/* First, check the state of our subdisks. */
sdstates = gv_sdstatemap(p);
/* If all subdisks are up, our plex can be up, too. */
if (sdstates == GV_SD_UPSTATE)
p->state = GV_PLEX_UP;
/* One or more of our subdisks are down. */
else if (sdstates & GV_SD_DOWNSTATE) {
/* A RAID5 plex can handle one dead subdisk. */
if ((p->org == GV_PLEX_RAID5) && (p->sddown == 1))
p->state = GV_PLEX_DEGRADED;
else
p->state = GV_PLEX_DOWN;
/* Some of our subdisks are initializing. */
} else if (sdstates & GV_SD_INITSTATE) {
if (p->flags & GV_PLEX_SYNCING ||
p->flags & GV_PLEX_REBUILDING)
p->state = GV_PLEX_DEGRADED;
else
p->state = GV_PLEX_DOWN;
} else
p->state = GV_PLEX_DOWN;
if (p->state == GV_PLEX_UP) {
LIST_FOREACH(s, &p->subdisks, in_plex) {
if (s->flags & GV_SD_GROW) {
p->state = GV_PLEX_GROWABLE;
break;
}
}
}
if (p->state != oldstate)
G_VINUM_DEBUG(1, "plex %s state change: %s -> %s", p->name,
gv_plexstate(oldstate), gv_plexstate(p->state));
/* Update our volume, if we have one. */
if (p->vol_sc != NULL)
gv_update_vol_state(p->vol_sc);
}
/* Update the volume state based on its plexes. */
void
gv_update_vol_state(struct gv_volume *v)
{
struct gv_plex *p;
KASSERT(v != NULL, ("gv_update_vol_state: NULL v"));
/* The volume can't be up without plexes. */
if (v->plexcount == 0) {
v->state = GV_VOL_DOWN;
return;
}
LIST_FOREACH(p, &v->plexes, in_volume) {
/* One of our plexes is accessible, and so are we. */
if (p->state > GV_PLEX_DEGRADED) {
v->state = GV_VOL_UP;
return;
/* We can handle a RAID5 plex with one dead subdisk as well. */
} else if ((p->org == GV_PLEX_RAID5) &&
(p->state == GV_PLEX_DEGRADED)) {
v->state = GV_VOL_UP;
return;
}
}
/* Not one of our plexes is up, so we can't be either. */
v->state = GV_VOL_DOWN;
}
/* Return a state map for the subdisks of a plex. */
int
gv_sdstatemap(struct gv_plex *p)
{
struct gv_sd *s;
int statemap;
KASSERT(p != NULL, ("gv_sdstatemap: NULL p"));
statemap = 0;
p->sddown = 0; /* No subdisks down yet. */
LIST_FOREACH(s, &p->subdisks, in_plex) {
switch (s->state) {
case GV_SD_DOWN:
case GV_SD_STALE:
statemap |= GV_SD_DOWNSTATE;
p->sddown++; /* Another unusable subdisk. */
break;
case GV_SD_UP:
statemap |= GV_SD_UPSTATE;
break;
case GV_SD_INITIALIZING:
statemap |= GV_SD_INITSTATE;
break;
case GV_SD_REVIVING:
statemap |= GV_SD_INITSTATE;
p->sddown++; /* XXX: Another unusable subdisk? */
break;
}
}
return (statemap);
}