mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-25 11:37:56 +00:00
Code Issues Releases Activity
bd4029713f
freebsd/sys/dev/vge/if_vgereg.h

698 lines
29 KiB
C
Raw Blame History

/*-
* Copyright (c) 2004
* Bill Paul <wpaul@windriver.com>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Register definitions for the VIA VT6122 gigabit ethernet controller.
* Definitions for the built-in copper PHY can be found in vgphy.h.
*
* The VT612x controllers have 256 bytes of register space. The
* manual seems to imply that the registers should all be accessed
* using 32-bit I/O cycles, but some of them are less than 32 bits
* wide. Go figure.
*/
#ifndef _IF_VGEREG_H_
#define _IF_VGEREG_H_
#define VIA_VENDORID 0x1106
#define VIA_DEVICEID_61XX 0x3119
#define VGE_PAR0 0x00 /* physical address register */
#define VGE_PAR1 0x02
#define VGE_PAR2 0x04
#define VGE_RXCTL 0x06 /* RX control register */
#define VGE_TXCTL 0x07 /* TX control register */
#define VGE_CRS0 0x08 /* Global cmd register 0 (w to set) */
#define VGE_CRS1 0x09 /* Global cmd register 1 (w to set) */
#define VGE_CRS2 0x0A /* Global cmd register 2 (w to set) */
#define VGE_CRS3 0x0B /* Global cmd register 3 (w to set) */
#define VGE_CRC0 0x0C /* Global cmd register 0 (w to clr) */
#define VGE_CRC1 0x0D /* Global cmd register 1 (w to clr) */
#define VGE_CRC2 0x0E /* Global cmd register 2 (w to clr) */
#define VGE_CRC3 0x0F /* Global cmd register 3 (w to clr) */
#define VGE_MAR0 0x10 /* Mcast hash/CAM register 0 */
#define VGE_MAR1 0x14 /* Mcast hash/CAM register 1 */
#define VGE_CAM0 0x10
#define VGE_CAM1 0x11
#define VGE_CAM2 0x12
#define VGE_CAM3 0x13
#define VGE_CAM4 0x14
#define VGE_CAM5 0x15
#define VGE_CAM6 0x16
#define VGE_CAM7 0x17
#define VGE_TXDESC_HIADDR 0x18 /* Hi part of 64bit txdesc base addr */
#define VGE_DATABUF_HIADDR 0x1D /* Hi part of 64bit data buffer addr */
#define VGE_INTCTL0 0x20 /* interrupt control register */
#define VGE_RXSUPPTHR 0x20
#define VGE_TXSUPPTHR 0x20
#define VGE_INTHOLDOFF 0x20
#define VGE_INTCTL1 0x21 /* interrupt control register */
#define VGE_TXHOSTERR 0x22 /* TX host error status */
#define VGE_RXHOSTERR 0x23 /* RX host error status */
#define VGE_ISR 0x24 /* Interrupt status register */
#define VGE_IMR 0x28 /* Interrupt mask register */
#define VGE_TXSTS_PORT 0x2C /* Transmit status port (???) */
#define VGE_TXQCSRS 0x30 /* TX queue ctl/status set */
#define VGE_RXQCSRS 0x32 /* RX queue ctl/status set */
#define VGE_TXQCSRC 0x34 /* TX queue ctl/status clear */
#define VGE_RXQCSRC 0x36 /* RX queue ctl/status clear */
#define VGE_RXDESC_ADDR_LO 0x38 /* RX desc base addr (lo 32 bits) */
#define VGE_RXDESC_CONSIDX 0x3C /* Current RX descriptor index */
#define VGE_RXQTIMER 0x3E /* RX queue timer pend register */
#define VGE_TXQTIMER 0x3F /* TX queue timer pend register */
#define VGE_TXDESC_ADDR_LO0 0x40 /* TX desc0 base addr (lo 32 bits) */
#define VGE_TXDESC_ADDR_LO1 0x44 /* TX desc1 base addr (lo 32 bits) */
#define VGE_TXDESC_ADDR_LO2 0x48 /* TX desc2 base addr (lo 32 bits) */
#define VGE_TXDESC_ADDR_LO3 0x4C /* TX desc3 base addr (lo 32 bits) */
#define VGE_RXDESCNUM 0x50 /* Size of RX desc ring */
#define VGE_TXDESCNUM 0x52 /* Size of TX desc ring */
#define VGE_TXDESC_CONSIDX0 0x54 /* Current TX descriptor index */
#define VGE_TXDESC_CONSIDX1 0x56 /* Current TX descriptor index */
#define VGE_TXDESC_CONSIDX2 0x58 /* Current TX descriptor index */
#define VGE_TXDESC_CONSIDX3 0x5A /* Current TX descriptor index */
#define VGE_TX_PAUSE_TIMER 0x5C /* TX pause frame timer */
#define VGE_RXDESC_RESIDUECNT 0x5E /* RX descriptor residue count */
#define VGE_FIFOTEST0 0x60 /* FIFO test register */
#define VGE_FIFOTEST1 0x64 /* FIFO test register */
#define VGE_CAMADDR 0x68 /* CAM address register */
#define VGE_CAMCTL 0x69 /* CAM control register */
#define VGE_GFTEST 0x6A
#define VGE_FTSCMD 0x6B
#define VGE_MIICFG 0x6C /* MII port config register */
#define VGE_MIISTS 0x6D /* MII port status register */
#define VGE_PHYSTS0 0x6E /* PHY status register */
#define VGE_PHYSTS1 0x6F /* PHY status register */
#define VGE_MIICMD 0x70 /* MII command register */
#define VGE_MIIADDR 0x71 /* MII address register */
#define VGE_MIIDATA 0x72 /* MII data register */
#define VGE_SSTIMER 0x74 /* single-shot timer */
#define VGE_PTIMER 0x76 /* periodic timer */
#define VGE_CHIPCFG0 0x78 /* chip config A */
#define VGE_CHIPCFG1 0x79 /* chip config B */
#define VGE_CHIPCFG2 0x7A /* chip config C */
#define VGE_CHIPCFG3 0x7B /* chip config D */
#define VGE_DMACFG0 0x7C /* DMA config 0 */
#define VGE_DMACFG1 0x7D /* DMA config 1 */
#define VGE_RXCFG 0x7E /* MAC RX config */
#define VGE_TXCFG 0x7F /* MAC TX config */
#define VGE_PWRMGMT 0x82 /* power management shadow register */
#define VGE_PWRSTAT 0x83 /* power state shadow register */
#define VGE_MIBCSR 0x84 /* MIB control/status register */
#define VGE_SWEEDATA 0x85 /* EEPROM software loaded data */
#define VGE_MIBDATA 0x88 /* MIB data register */
#define VGE_EEWRDAT 0x8C /* EEPROM embedded write */
#define VGE_EECSUM 0x92 /* EEPROM checksum */
#define VGE_EECSR 0x93 /* EEPROM control/status */
#define VGE_EERDDAT 0x94 /* EEPROM embedded read */
#define VGE_EEADDR 0x96 /* EEPROM address */
#define VGE_EECMD 0x97 /* EEPROM embedded command */
#define VGE_CHIPSTRAP 0x99 /* Chip jumper strapping status */
#define VGE_MEDIASTRAP 0x9B /* Media jumper strapping */
#define VGE_DIAGSTS 0x9C /* Chip diagnostic status */
#define VGE_DBGCTL 0x9E /* Chip debug control */
#define VGE_DIAGCTL 0x9F /* Chip diagnostic control */
#define VGE_WOLCR0S 0xA0 /* WOL0 event set */
#define VGE_WOLCR1S 0xA1 /* WOL1 event set */
#define VGE_PWRCFGS 0xA2 /* Power management config set */
#define VGE_WOLCFGS 0xA3 /* WOL config set */
#define VGE_WOLCR0C 0xA4 /* WOL0 event clear */
#define VGE_WOLCR1C 0xA5 /* WOL1 event clear */
#define VGE_PWRCFGC 0xA6 /* Power management config clear */
#define VGE_WOLCFGC 0xA7 /* WOL config clear */
#define VGE_WOLSR0S 0xA8 /* WOL status set */
#define VGE_WOLSR1S 0xA9 /* WOL status set */
#define VGE_WOLSR0C 0xAC /* WOL status clear */
#define VGE_WOLSR1C 0xAD /* WOL status clear */
#define VGE_WAKEPAT_CRC0 0xB0
#define VGE_WAKEPAT_CRC1 0xB2
#define VGE_WAKEPAT_CRC2 0xB4
#define VGE_WAKEPAT_CRC3 0xB6
#define VGE_WAKEPAT_CRC4 0xB8
#define VGE_WAKEPAT_CRC5 0xBA
#define VGE_WAKEPAT_CRC6 0xBC
#define VGE_WAKEPAT_CRC7 0xBE
#define VGE_WAKEPAT_MSK0_0 0xC0
#define VGE_WAKEPAT_MSK0_1 0xC4
#define VGE_WAKEPAT_MSK0_2 0xC8
#define VGE_WAKEPAT_MSK0_3 0xCC
#define VGE_WAKEPAT_MSK1_0 0xD0
#define VGE_WAKEPAT_MSK1_1 0xD4
#define VGE_WAKEPAT_MSK1_2 0xD8
#define VGE_WAKEPAT_MSK1_3 0xDC
#define VGE_WAKEPAT_MSK2_0 0xE0
#define VGE_WAKEPAT_MSK2_1 0xE4
#define VGE_WAKEPAT_MSK2_2 0xE8
#define VGE_WAKEPAT_MSK2_3 0xEC
#define VGE_WAKEPAT_MSK3_0 0xF0
#define VGE_WAKEPAT_MSK3_1 0xF4
#define VGE_WAKEPAT_MSK3_2 0xF8
#define VGE_WAKEPAT_MSK3_3 0xFC
/* Receive control register */
#define VGE_RXCTL_RX_BADFRAMES 0x01 /* accept CRC error frames */
#define VGE_RXCTL_RX_RUNT 0x02 /* accept runts */
#define VGE_RXCTL_RX_MCAST 0x04 /* accept multicasts */
#define VGE_RXCTL_RX_BCAST 0x08 /* accept broadcasts */
#define VGE_RXCTL_RX_PROMISC 0x10 /* promisc mode */
#define VGE_RXCTL_RX_GIANT 0x20 /* accept VLAN tagged frames */
#define VGE_RXCTL_RX_UCAST 0x40 /* use perfect filtering */
#define VGE_RXCTL_RX_SYMERR 0x80 /* accept symbol err packet */
/* Transmit control register */
#define VGE_TXCTL_LOOPCTL 0x03 /* loopback control */
#define VGE_TXCTL_COLLCTL 0x0C /* collision retry control */
#define VGE_TXLOOPCTL_OFF 0x00
#define VGE_TXLOOPCTL_MAC_INTERNAL 0x01
#define VGE_TXLOOPCTL_EXTERNAL 0x02
#define VGE_TXCOLLS_NORMAL 0x00 /* one set of 16 retries */
#define VGE_TXCOLLS_32 0x04 /* two sets of 16 retries */
#define VGE_TXCOLLS_48 0x08 /* three sets of 16 retries */
#define VGE_TXCOLLS_INFINITE 0x0C /* retry forever */
/* Global command register 0 */
#define VGE_CR0_START 0x01 /* start NIC */
#define VGE_CR0_STOP 0x02 /* stop NIC */
#define VGE_CR0_RX_ENABLE 0x04 /* turn on RX engine */
#define VGE_CR0_TX_ENABLE 0x08 /* turn on TX engine */
/* Global command register 1 */
#define VGE_CR1_NOUCAST 0x01 /* disable unicast reception */
#define VGE_CR1_NOPOLL 0x08 /* disable RX/TX desc polling */
#define VGE_CR1_TIMER0_ENABLE 0x20 /* enable single shot timer */
#define VGE_CR1_TIMER1_ENABLE 0x40 /* enable periodic timer */
#define VGE_CR1_SOFTRESET 0x80 /* software reset */
/* Global command register 2 */
#define VGE_CR2_TXPAUSE_THRESH_LO 0x03 /* TX pause frame lo threshold */
#define VGE_CR2_TXPAUSE_THRESH_HI 0x0C /* TX pause frame hi threshold */
#define VGE_CR2_HDX_FLOWCTL_ENABLE 0x10 /* half duplex flow control */
#define VGE_CR2_FDX_RXFLOWCTL_ENABLE 0x20 /* full duplex RX flow control */
#define VGE_CR2_FDX_TXFLOWCTL_ENABLE 0x40 /* full duplex TX flow control */
#define VGE_CR2_XON_ENABLE 0x80 /* 802.3x XON/XOFF flow control */
/* Global command register 3 */
#define VGE_CR3_INT_SWPEND 0x01 /* disable multi-level int bits */
#define VGE_CR3_INT_GMSK 0x02 /* mask off all interrupts */
#define VGE_CR3_INT_HOLDOFF 0x04 /* enable int hold off timer */
#define VGE_CR3_DIAG 0x10 /* diagnostic enabled */
#define VGE_CR3_PHYRST 0x20 /* assert PHYRSTZ */
#define VGE_CR3_STOP_FORCE 0x40 /* force NIC to stopped state */
/* Interrupt control register */
#define VGE_INTCTL_SC_RELOAD 0x01 /* reload hold timer */
#define VGE_INTCTL_HC_RELOAD 0x02 /* enable hold timer reload */
#define VGE_INTCTL_STATUS 0x04 /* interrupt pending status */
#define VGE_INTCTL_MASK 0x18 /* multilayer int mask */
#define VGE_INTCTL_RXINTSUP_DISABLE 0x20 /* disable RX int supression */
#define VGE_INTCTL_TXINTSUP_DISABLE 0x40 /* disable TX int supression */
#define VGE_INTCTL_SOFTINT 0x80 /* request soft interrupt */
#define VGE_INTMASK_LAYER0 0x00
#define VGE_INTMASK_LAYER1 0x08
#define VGE_INTMASK_ALL 0x10
#define VGE_INTMASK_ALL2 0x18
/* Transmit host error status register */
#define VGE_TXHOSTERR_TDSTRUCT 0x01 /* bad TX desc structure */
#define VGE_TXHOSTERR_TDFETCH_BUSERR 0x02 /* bus error on desc fetch */
#define VGE_TXHOSTERR_TDWBACK_BUSERR 0x04 /* bus error on desc writeback */
#define VGE_TXHOSTERR_FIFOERR 0x08 /* TX FIFO DMA bus error */
/* Receive host error status register */
#define VGE_RXHOSTERR_RDSTRUCT 0x01 /* bad RX desc structure */
#define VGE_RXHOSTERR_RDFETCH_BUSERR 0x02 /* bus error on desc fetch */
#define VGE_RXHOSTERR_RDWBACK_BUSERR 0x04 /* bus error on desc writeback */
#define VGE_RXHOSTERR_FIFOERR 0x08 /* RX FIFO DMA bus error */
/* Interrupt status register */
#define VGE_ISR_RXOK_HIPRIO 0x00000001 /* hi prio RX int */
#define VGE_ISR_TXOK_HIPRIO 0x00000002 /* hi prio TX int */
#define VGE_ISR_RXOK 0x00000004 /* normal RX done */
#define VGE_ISR_TXOK 0x00000008 /* combo results for next 4 bits */
#define VGE_ISR_TXOK0 0x00000010 /* TX complete on queue 0 */
#define VGE_ISR_TXOK1 0x00000020 /* TX complete on queue 1 */
#define VGE_ISR_TXOK2 0x00000040 /* TX complete on queue 2 */
#define VGE_ISR_TXOK3 0x00000080 /* TX complete on queue 3 */
#define VGE_ISR_RXCNTOFLOW 0x00000400 /* RX packet count overflow */
#define VGE_ISR_RXPAUSE 0x00000800 /* pause frame RX'ed */
#define VGE_ISR_RXOFLOW 0x00001000 /* RX FIFO overflow */
#define VGE_ISR_RXNODESC 0x00002000 /* ran out of RX descriptors */
#define VGE_ISR_RXNODESC_WARN 0x00004000 /* running out of RX descs */
#define VGE_ISR_LINKSTS 0x00008000 /* link status change */
#define VGE_ISR_TIMER0 0x00010000 /* one shot timer expired */
#define VGE_ISR_TIMER1 0x00020000 /* periodic timer expired */
#define VGE_ISR_PWR 0x00040000 /* wake up power event */
#define VGE_ISR_PHYINT 0x00080000 /* PHY interrupt */
#define VGE_ISR_STOPPED 0x00100000 /* software shutdown complete */
#define VGE_ISR_MIBOFLOW 0x00200000 /* MIB counter overflow warning */
#define VGE_ISR_SOFTINT 0x00400000 /* software interrupt */
#define VGE_ISR_HOLDOFF_RELOAD 0x00800000 /* reload hold timer */
#define VGE_ISR_RXDMA_STALL 0x01000000 /* RX DMA stall */
#define VGE_ISR_TXDMA_STALL 0x02000000 /* TX DMA STALL */
#define VGE_ISR_ISRC0 0x10000000 /* interrupt source indication */
#define VGE_ISR_ISRC1 0x20000000 /* interrupt source indication */
#define VGE_ISR_ISRC2 0x40000000 /* interrupt source indication */
#define VGE_ISR_ISRC3 0x80000000 /* interrupt source indication */
#define VGE_INTRS (VGE_ISR_TXOK0|VGE_ISR_RXOK|VGE_ISR_STOPPED| \
VGE_ISR_RXOFLOW|VGE_ISR_PHYINT| \
VGE_ISR_LINKSTS|VGE_ISR_RXNODESC| \
VGE_ISR_RXDMA_STALL|VGE_ISR_TXDMA_STALL| \
VGE_ISR_MIBOFLOW|VGE_ISR_TIMER0)
/* Interrupt mask register */
#define VGE_IMR_RXOK_HIPRIO 0x00000001 /* hi prio RX int */
#define VGE_IMR_TXOK_HIPRIO 0x00000002 /* hi prio TX int */
#define VGE_IMR_RXOK 0x00000004 /* normal RX done */
#define VGE_IMR_TXOK 0x00000008 /* combo results for next 4 bits */
#define VGE_IMR_TXOK0 0x00000010 /* TX complete on queue 0 */
#define VGE_IMR_TXOK1 0x00000020 /* TX complete on queue 1 */
#define VGE_IMR_TXOK2 0x00000040 /* TX complete on queue 2 */
#define VGE_IMR_TXOK3 0x00000080 /* TX complete on queue 3 */
#define VGE_IMR_RXCNTOFLOW 0x00000400 /* RX packet count overflow */
#define VGE_IMR_RXPAUSE 0x00000800 /* pause frame RX'ed */
#define VGE_IMR_RXOFLOW 0x00001000 /* RX FIFO overflow */
#define VGE_IMR_RXNODESC 0x00002000 /* ran out of RX descriptors */
#define VGE_IMR_RXNODESC_WARN 0x00004000 /* running out of RX descs */
#define VGE_IMR_LINKSTS 0x00008000 /* link status change */
#define VGE_IMR_TIMER0 0x00010000 /* one shot timer expired */
#define VGE_IMR_TIMER1 0x00020000 /* periodic timer expired */
#define VGE_IMR_PWR 0x00040000 /* wake up power event */
#define VGE_IMR_PHYINT 0x00080000 /* PHY interrupt */
#define VGE_IMR_STOPPED 0x00100000 /* software shutdown complete */
#define VGE_IMR_MIBOFLOW 0x00200000 /* MIB counter overflow warning */
#define VGE_IMR_SOFTINT 0x00400000 /* software interrupt */
#define VGE_IMR_HOLDOFF_RELOAD 0x00800000 /* reload hold timer */
#define VGE_IMR_RXDMA_STALL 0x01000000 /* RX DMA stall */
#define VGE_IMR_TXDMA_STALL 0x02000000 /* TX DMA STALL */
#define VGE_IMR_ISRC0 0x10000000 /* interrupt source indication */
#define VGE_IMR_ISRC1 0x20000000 /* interrupt source indication */
#define VGE_IMR_ISRC2 0x40000000 /* interrupt source indication */
#define VGE_IMR_ISRC3 0x80000000 /* interrupt source indication */
/* TX descriptor queue control/status register */
#define VGE_TXQCSR_RUN0 0x0001 /* Enable TX queue 0 */
#define VGE_TXQCSR_ACT0 0x0002 /* queue 0 active indicator */
#define VGE_TXQCSR_WAK0 0x0004 /* Wake up (poll) queue 0 */
#define VGE_TXQCST_DEAD0 0x0008 /* queue 0 dead indicator */
#define VGE_TXQCSR_RUN1 0x0010 /* Enable TX queue 1 */
#define VGE_TXQCSR_ACT1 0x0020 /* queue 1 active indicator */
#define VGE_TXQCSR_WAK1 0x0040 /* Wake up (poll) queue 1 */
#define VGE_TXQCST_DEAD1 0x0080 /* queue 1 dead indicator */
#define VGE_TXQCSR_RUN2 0x0100 /* Enable TX queue 2 */
#define VGE_TXQCSR_ACT2 0x0200 /* queue 2 active indicator */
#define VGE_TXQCSR_WAK2 0x0400 /* Wake up (poll) queue 2 */
#define VGE_TXQCST_DEAD2 0x0800 /* queue 2 dead indicator */
#define VGE_TXQCSR_RUN3 0x1000 /* Enable TX queue 3 */
#define VGE_TXQCSR_ACT3 0x2000 /* queue 3 active indicator */
#define VGE_TXQCSR_WAK3 0x4000 /* Wake up (poll) queue 3 */
#define VGE_TXQCST_DEAD3 0x8000 /* queue 3 dead indicator */
/* RX descriptor queue control/status register */
#define VGE_RXQCSR_RUN 0x0001 /* Enable RX queue */
#define VGE_RXQCSR_ACT 0x0002 /* queue active indicator */
#define VGE_RXQCSR_WAK 0x0004 /* Wake up (poll) queue */
#define VGE_RXQCSR_DEAD 0x0008 /* queue dead indicator */
/* RX/TX queue empty interrupt delay timer register */
#define VGE_QTIMER_PENDCNT 0x3F
#define VGE_QTIMER_RESOLUTION 0xC0
#define VGE_QTIMER_RES_1US 0x00
#define VGE_QTIMER_RES_4US 0x40
#define VGE_QTIMER_RES_16US 0x80
#define VGE_QTIMER_RES_64US 0xC0
/* CAM address register */
#define VGE_CAMADDR_ADDR 0x3F /* CAM address to program */
#define VGE_CAMADDR_AVSEL 0x40 /* 0 = address cam, 1 = VLAN cam */
#define VGE_CAMADDR_ENABLE 0x80 /* enable CAM read/write */
#define VGE_CAM_MAXADDRS 64
/*
* CAM command register
* Note that the page select bits in this register affect three
* different things:
* - The behavior of the MAR0/MAR1 registers at offset 0x10 (the
* page select bits control whether the MAR0/MAR1 registers affect
* the multicast hash filter or the CAM table)
* - The behavior of the interrupt holdoff timer register at offset
* 0x20 (the page select bits allow you to set the interrupt
* holdoff timer, the TX interrupt supression count or the
* RX interrupt supression count)
* - The behavior the WOL pattern programming registers at offset
* 0xC0 (controls which pattern is set)
*/
#define VGE_CAMCTL_WRITE 0x04 /* CAM write command */
#define VGE_CAMCTL_READ 0x08 /* CAM read command */
#define VGE_CAMCTL_INTPKT_SIZ 0x10 /* select interesting pkt CAM size */
#define VGE_CAMCTL_INTPKT_ENB 0x20 /* enable interesting packet mode */
#define VGE_CAMCTL_PAGESEL 0xC0 /* page select */
#define VGE_PAGESEL_MAR 0x00
#define VGE_PAGESEL_CAMMASK 0x40
#define VGE_PAGESEL_CAMDATA 0x80
#define VGE_PAGESEL_INTHLDOFF 0x00
#define VGE_PAGESEL_TXSUPPTHR 0x40
#define VGE_PAGESEL_RXSUPPTHR 0x80
#define VGE_PAGESEL_WOLPAT0 0x00
#define VGE_PAGESEL_WOLPAT1 0x40
/* MII port config register */
#define VGE_MIICFG_PHYADDR 0x1F /* PHY address (internal PHY is 1) */
#define VGE_MIICFG_MDCSPEED 0x20 /* MDC accelerate x 4 */
#define VGE_MIICFG_POLLINT 0xC0 /* polling interval */
#define VGE_MIIPOLLINT_1024 0x00
#define VGE_MIIPOLLINT_512 0x40
#define VGE_MIIPOLLINT_128 0x80
#define VGE_MIIPOLLINT_64 0xC0
/* MII port status register */
#define VGE_MIISTS_IIDL 0x80 /* not at sofrware/timer poll cycle */
/* PHY status register */
#define VGE_PHYSTS_TXFLOWCAP 0x01 /* resolved TX flow control cap */
#define VGE_PHYSTS_RXFLOWCAP 0x02 /* resolved RX flow control cap */
#define VGE_PHYSTS_SPEED10 0x04 /* PHY in 10Mbps mode */
#define VGE_PHYSTS_SPEED1000 0x08 /* PHY in giga mode */
#define VGE_PHYSTS_FDX 0x10 /* PHY in full duplex mode */
#define VGE_PHYSTS_LINK 0x40 /* link status */
#define VGE_PHYSTS_RESETSTS 0x80 /* reset status */
/* MII management command register */
#define VGE_MIICMD_MDC 0x01 /* clock pin */
#define VGE_MIICMD_MDI 0x02 /* data in pin */
#define VGE_MIICMD_MDO 0x04 /* data out pin */
#define VGE_MIICMD_MOUT 0x08 /* data out pin enable */
#define VGE_MIICMD_MDP 0x10 /* enable direct programming mode */
#define VGE_MIICMD_WCMD 0x20 /* embedded mode write */
#define VGE_MIICMD_RCMD 0x40 /* embadded mode read */
#define VGE_MIICMD_MAUTO 0x80 /* enable autopolling */
/* MII address register */
#define VGE_MIIADDR_SWMPL 0x80 /* initiate priority resolution */
/* Chip config register A */
#define VGE_CHIPCFG0_PACPI 0x01 /* pre-ACPI wakeup function */
#define VGE_CHIPCFG0_ABSHDN 0x02 /* abnormal shutdown function */
#define VGE_CHIPCFG0_GPIO1PD 0x04 /* GPIO pin enable */
#define VGE_CHIPCFG0_SKIPTAG 0x08 /* omit 802.1p tag from CRC calc */
#define VGE_CHIPCFG0_PHLED 0x30 /* phy LED select */
/* Chip config register B */
/* Note: some of these bits are not documented in the manual! */
#define VGE_CHIPCFG1_BAKOPT 0x01
#define VGE_CHIPCFG1_MBA 0x02
#define VGE_CHIPCFG1_CAP 0x04
#define VGE_CHIPCFG1_CRANDOM 0x08
#define VGE_CHIPCFG1_OFSET 0x10
#define VGE_CHIPCFG1_SLOTTIME 0x20 /* slot time 512/500 in giga mode */
#define VGE_CHIPCFG1_MIIOPT 0x40
#define VGE_CHIPCFG1_GTCKOPT 0x80
/* Chip config register C */
#define VGE_CHIPCFG2_EELOAD 0x80 /* enable EEPROM programming */
/* Chip config register D */
#define VGE_CHIPCFG3_64BIT_DAC 0x20 /* enable 64bit via DAC */
#define VGE_CHIPCFG3_IODISABLE 0x80 /* disable I/O access mode */
/* DMA config register 0 */
#define VGE_DMACFG0_BURSTLEN 0x07 /* RX/TX DMA burst (in dwords) */
#define VGE_DMABURST_8 0x00
#define VGE_DMABURST_16 0x01
#define VGE_DMABURST_32 0x02
#define VGE_DMABURST_64 0x03
#define VGE_DMABURST_128 0x04
#define VGE_DMABURST_256 0x05
#define VGE_DMABURST_STRFWD 0x07
/* DMA config register 1 */
#define VGE_DMACFG1_LATENB 0x01 /* Latency timer enable */
#define VGE_DMACFG1_MWWAIT 0x02 /* insert wait on master write */
#define VGE_DMACFG1_MRWAIT 0x04 /* insert wait on master read */
#define VGE_DMACFG1_MRM 0x08 /* use memory read multiple */
#define VGE_DMACFG1_PERR_DIS 0x10 /* disable parity error checking */
#define VGE_DMACFG1_XMRL 0x20 /* disable memory read line support */
/* RX MAC config register */
#define VGE_RXCFG_VLANFILT 0x01 /* filter VLAN ID mismatches */
#define VGE_RXCFG_VTAGOPT 0x06 /* VLAN tag handling */
#define VGE_RXCFG_FIFO_LOWAT 0x08 /* RX FIFO low watermark (7QW/15QW) */
#define VGE_RXCFG_FIFO_THR 0x30 /* RX FIFO threshold */
#define VGE_RXCFG_ARB_PRIO 0x80 /* arbitration priority */
#define VGE_VTAG_OPT0 0x00 /* TX: no tag insertion
RX: rx all, no tag extraction */
#define VGE_VTAG_OPT1 0x02 /* TX: no tag insertion
RX: rx only tagged pkts, no
extraction */
#define VGE_VTAG_OPT2 0x04 /* TX: perform tag insertion,
RX: rx all, extract tags */
#define VGE_VTAG_OPT3 0x06 /* TX: perform tag insertion,
RX: rx only tagged pkts,
with extraction */
#define VGE_RXFIFOTHR_128BYTES 0x00
#define VGE_RXFIFOTHR_512BYTES 0x10
#define VGE_RXFIFOTHR_1024BYTES 0x20
#define VGE_RXFIFOTHR_STRNFWD 0x30
/* TX MAC config register */
#define VGE_TXCFG_SNAPOPT 0x01 /* 1 == insert VLAN tag at
13th byte
0 == insert VLANM tag after
SNAP header (21st byte) */
#define VGE_TXCFG_NONBLK 0x02 /* priority TX/non-blocking mode */
#define VGE_TXCFG_NONBLK_THR 0x0C /* non-blocking threshold */
#define VGE_TXCFG_ARB_PRIO 0x80 /* arbitration priority */
#define VGE_TXBLOCK_64PKTS 0x00
#define VGE_TXBLOCK_32PKTS 0x04
#define VGE_TXBLOCK_128PKTS 0x08
#define VGE_TXBLOCK_8PKTS 0x0C
/* EEPROM control/status register */
#define VGE_EECSR_EDO 0x01 /* data out pin */
#define VGE_EECSR_EDI 0x02 /* data in pin */
#define VGE_EECSR_ECK 0x04 /* clock pin */
#define VGE_EECSR_ECS 0x08 /* chip select pin */
#define VGE_EECSR_DPM 0x10 /* direct program mode enable */
#define VGE_EECSR_RELOAD 0x20 /* trigger reload from EEPROM */
#define VGE_EECSR_EMBP 0x40 /* embedded program mode enable */
/* EEPROM embedded command register */
#define VGE_EECMD_ERD 0x01 /* EEPROM read command */
#define VGE_EECMD_EWR 0x02 /* EEPROM write command */
#define VGE_EECMD_EWEN 0x04 /* EEPROM write enable */
#define VGE_EECMD_EWDIS 0x08 /* EEPROM write disable */
#define VGE_EECMD_EDONE 0x80 /* read/write done */
/* Chip operation and diagnostic control register */
#define VGE_DIAGCTL_PHYINT_ENB 0x01 /* Enable PHY interrupts */
#define VGE_DIAGCTL_TIMER0_RES 0x02 /* timer0 uSec resolution */
#define VGE_DIAGCTL_TIMER1_RES 0x04 /* timer1 uSec resolution */
#define VGE_DIAGCTL_LPSEL_DIS 0x08 /* disable LPSEL field */
#define VGE_DIAGCTL_MACFORCE 0x10 /* MAC side force mode */
#define VGE_DIAGCTL_FCRSVD 0x20 /* reserved for future fiber use */
#define VGE_DIAGCTL_FDXFORCE 0x40 /* force full duplex mode */
#define VGE_DIAGCTL_GMII 0x80 /* force GMII mode, otherwise MII */
/* Location of station address in EEPROM */
#define VGE_EE_EADDR 0
/* DMA descriptor structures */
/*
* Each TX DMA descriptor has a control and status word, and 7
* fragment address/length words. If a transmitted packet spans
* more than 7 fragments, it has to be coalesced.
*/
#define VGE_TX_FRAGS 7
struct vge_tx_frag {
uint32_t vge_addrlo;
uint16_t vge_addrhi;
uint16_t vge_buflen;
};
/*
* The high bit in the buflen field of fragment #0 has special meaning.
* Normally, the chip requires the driver to issue a TX poll command
* for every packet that gets put in the TX DMA queue. Sometimes though,
* the driver might want to queue up several packets at once and just
* issue one transmit command to have all of them processed. In order
* to obtain this behavior, the special 'queue' bit must be set.
*/
#define VGE_TXDESC_Q 0x8000
struct vge_tx_desc {
uint32_t vge_sts;
uint32_t vge_ctl;
struct vge_tx_frag vge_frag[VGE_TX_FRAGS];
};
#define VGE_TDSTS_COLLCNT 0x0000000F /* TX collision count */
#define VGE_TDSTS_COLL 0x00000010 /* collision seen */
#define VGE_TDSTS_OWINCOLL 0x00000020 /* out of window collision */
#define VGE_TDSTS_OWT 0x00000040 /* jumbo frame tx abort */
#define VGE_TDSTS_EXCESSCOLL 0x00000080 /* TX aborted, excess colls */
#define VGE_TDSTS_HBEATFAIL 0x00000100 /* heartbeat detect failed */
#define VGE_TDSTS_CARRLOSS 0x00000200 /* carrier sense lost */
#define VGE_TDSTS_SHUTDOWN 0x00000400 /* shutdown during TX */
#define VGE_TDSTS_LINKFAIL 0x00001000 /* link fail during TX */
#define VGE_TDSTS_GMII 0x00002000 /* GMII transmission */
#define VGE_TDSTS_FDX 0x00004000 /* full duplex transmit */
#define VGE_TDSTS_TXERR 0x00008000 /* error occurred */
#define VGE_TDSTS_SEGSIZE 0x3FFF0000 /* TCP large send size */
#define VGE_TDSTS_OWN 0x80000000 /* own bit */
#define VGE_TDCTL_VLANID 0x00000FFF /* VLAN ID */
#define VGE_TDCTL_CFI 0x00001000 /* VLAN CFI bit */
#define VGE_TDCTL_PRIO 0x0000E000 /* VLAN prio bits */
#define VGE_TDCTL_NOCRC 0x00010000 /* disable CRC generation */
#define VGE_TDCTL_JUMBO 0x00020000 /* jumbo frame */
#define VGE_TDCTL_TCPCSUM 0x00040000 /* do TCP hw checksum */
#define VGE_TDCTL_UDPCSUM 0x00080000 /* do UDP hw checksum */
#define VGE_TDCTL_IPCSUM 0x00100000 /* do IP hw checksum */
#define VGE_TDCTL_VTAG 0x00200000 /* insert VLAN tag */
#define VGE_TDCTL_PRIO_INT 0x00400000 /* priority int request */
#define VGE_TDCTL_TIC 0x00800000 /* transfer int request */
#define VGE_TDCTL_TCPLSCTL 0x03000000 /* TCP large send ctl */
#define VGE_TDCTL_FRAGCNT 0xF0000000 /* number of frags used */
#define VGE_TD_LS_MOF 0x00000000 /* middle of large send */
#define VGE_TD_LS_SOF 0x01000000 /* start of large send */
#define VGE_TD_LS_EOF 0x02000000 /* end of large send */
#define VGE_TD_LS_NORM 0x03000000 /* normal frame */
/* Receive DMA descriptors have a single fragment pointer. */
struct vge_rx_desc {
volatile uint32_t vge_sts;
volatile uint32_t vge_ctl;
volatile uint32_t vge_addrlo;
volatile uint16_t vge_addrhi;
volatile uint16_t vge_buflen;
};
/*
* Like the TX descriptor, the high bit in the buflen field in the
* RX descriptor has special meaning. This bit controls whether or
* not interrupts are generated for this descriptor.
*/
#define VGE_RXDESC_I 0x8000
#define VGE_RDSTS_VIDM 0x00000001 /* VLAN tag filter miss */
#define VGE_RDSTS_CRCERR 0x00000002 /* bad CRC error */
#define VGE_RDSTS_FAERR 0x00000004 /* frame alignment error */
#define VGE_RDSTS_CSUMERR 0x00000008 /* bad TCP/IP checksum */
#define VGE_RDSTS_RLERR 0x00000010 /* RX length error */
#define VGE_RDSTS_SYMERR 0x00000020 /* PCS symbol error */
#define VGE_RDSTS_SNTAG 0x00000040 /* RX'ed tagged SNAP pkt */
#define VGE_RDSTS_DETAG 0x00000080 /* VLAN tag extracted */
#define VGE_RDSTS_BOUNDARY 0x00000300 /* frame boundary bits */
#define VGE_RDSTS_VTAG 0x00000400 /* VLAN tag indicator */
#define VGE_RDSTS_UCAST 0x00000800 /* unicast frame */
#define VGE_RDSTS_BCAST 0x00001000 /* broadcast frame */
#define VGE_RDSTS_MCAST 0x00002000 /* multicast frame */
#define VGE_RDSTS_PFT 0x00004000 /* perfect filter hit */
#define VGE_RDSTS_RXOK 0x00008000 /* frame is good. */
#define VGE_RDSTS_BUFSIZ 0x3FFF0000 /* received frame len */
#define VGE_RDSTS_SHUTDOWN 0x40000000 /* shutdown during RX */
#define VGE_RDSTS_OWN 0x80000000 /* own bit. */
#define VGE_RXPKT_ONEFRAG 0x00000000 /* only one fragment */
#define VGE_RXPKT_EOF 0x00000100 /* first frag in frame */
#define VGE_RXPKT_SOF 0x00000200 /* last frag in frame */
#define VGE_RXPKT_MOF 0x00000300 /* intermediate frag */
#define VGE_RDCTL_VLANID 0x0000FFFF /* VLAN ID info */
#define VGE_RDCTL_UDPPKT 0x00010000 /* UDP packet received */
#define VGE_RDCTL_TCPPKT 0x00020000 /* TCP packet received */
#define VGE_RDCTL_IPPKT 0x00040000 /* IP packet received */
#define VGE_RDCTL_UDPZERO 0x00080000 /* pkt with UDP CSUM of 0 */
#define VGE_RDCTL_FRAG 0x00100000 /* received IP frag */
#define VGE_RDCTL_PROTOCSUMOK 0x00200000 /* TCP/UDP checksum ok */
#define VGE_RDCTL_IPCSUMOK 0x00400000 /* IP checksum ok */
#define VGE_RDCTL_FILTIDX 0x3C000000 /* interesting filter idx */
#endif /* _IF_VGEREG_H_ */
Reference in New Issue View Git Blame Copy Permalink