freebsd/sys/i386/isa/qcam.c

/*
 * Connectix QuickCam parallel-port camera video capture driver.
 * Copyright (c) 1996, Paul Traina.
 *
 * This driver is based in part on work
 * Copyright (c) 1996, Thomas Davis.
 *
 * QuickCam(TM) is a registered trademark of Connectix Inc.
 * Use this driver at your own risk, it is not warranted by
 * Connectix or the authors.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer
 *    in this position and unchanged.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software withough specific prior written permission
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include	"qcam.h"
#if NQCAM > 0

#include	<sys/param.h>
#include	<sys/systm.h>
#include	<sys/kernel.h>
#include	<sys/conf.h>
#include	<sys/uio.h>
#include	<sys/malloc.h>
#ifdef DEVFS
#include	<sys/devfsext.h>
#endif /* DEVFS */

#include	<machine/clock.h>
#include	<machine/qcam.h>

#include	<i386/isa/qcamdefs.h>
#include	<i386/isa/isa.h>
#include	<i386/isa/isa_device.h>

/* working off of nostrategy is very ugly, but we need to determine if we're
   running in a kernel that has eliminated the cdevsw table (yea!) */

#if defined(__FreeBSD__) && defined(nostrategy)

#define CDEV_MAJOR 73
#define	STATIC_CDEVSW	static

static	d_open_t	qcam_open;
static	d_close_t	qcam_close;
static	d_read_t	qcam_read;
static	d_ioctl_t	qcam_ioctl;

static struct cdevsw qcam_cdevsw = 
	{ qcam_open,	qcam_close,	qcam_read,	nowrite,
	  qcam_ioctl,	nostop,		nullreset,	nodevtotty,
	  noselect,	nommap,		nostrategy,	"qcam",
	  NULL,		-1  };

static int qcam_probe(struct isa_device *devp);
static int qcam_attach(struct isa_device *devp);

struct isa_driver	qcamdriver =
			{qcam_probe, qcam_attach, "qcam"};

/*
 * Initialize the dynamic cdevsw hooks.
 */
static void
qcam_drvinit (void *unused)
{
	static int qcam_devsw_installed = 0;
	dev_t dev;

	if (!qcam_devsw_installed) {
		dev = makedev(CDEV_MAJOR, 0);
		cdevsw_add(&dev,&qcam_cdevsw, NULL);
		qcam_devsw_installed++;
    	}
}

SYSINIT(qcamdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,qcam_drvinit,NULL)

#endif	/* new FreeBSD configuration system */

#ifndef	STATIC_CDEVSW
#define	STATIC_CDEVSW
#endif

int	qcam_debug = 0;

static struct qcam_softc qcam_softc[NQCAM];

#define	QC_CONF_NODETECT 0x01		/* always assume camera is present */
#define	QC_CONF_FORCEUNI 0x02		/* force unidirectional transfers */

#define	UNIT(dev)		minor(dev)

static int
qcam_probe (struct isa_device *devp)
{
	switch (devp->id_iobase) {	/* don't probe weird ports */
	case IO_LPT1:
	case IO_LPT2:
	case IO_LPT3:
		break;
	default:
		printf("qcam%d: ignoring non-standard port 0x%x\n",
		       devp->id_unit, devp->id_iobase);
		return 0;
	}

	/*
	 * XXX The probe code is reported to be flakey.
	 *     We need to work on this some more, so temporarily,
	 *     allow bit one of the "flags" parameter to bypass this
	 *     check.
	 */

	if (!(devp->id_flags & QC_CONF_NODETECT))
	    if (!qcam_detect(devp->id_iobase))
		return 0;	/* failure */

	return 1;		/* found */
}

static int
qcam_attach (struct isa_device *devp)
{
	struct	qcam_softc *qs = &qcam_softc[devp->id_unit];

	qs->iobase	 = devp->id_iobase;
	qs->unit	 = devp->id_unit;
	qs->flags |= QC_ALIVE;

	/* force unidirectional parallel port mode? */
	if (devp->id_flags & QC_CONF_FORCEUNI)
		qs->flags |= QC_FORCEUNI;

	qcam_reset(qs);

	printf("qcam%d: %sdirectional parallel port\n",
	       qs->unit, qs->flags & QC_BIDIR_HW ? "bi" : "uni");

#ifdef DEVFS
	qs->devfs_token = 
		devfs_add_devswf(&qcam_cdevsw, qs->unit, DV_CHR, 0, 0, 0600, 
				 "qcam%d", qs->unit);
#endif
	return 1;
}

STATIC_CDEVSW int
qcam_open (dev_t dev, int flags, int fmt, struct proc *p)
{
	struct qcam_softc *qs = &qcam_softc[UNIT(dev)];

	if (!(qs->flags & QC_ALIVE))
		return ENXIO;

	if (qs->flags & QC_OPEN)
		return EBUSY;

	qs->buffer_end = qs->buffer = malloc(QC_MAXFRAMEBUFSIZE, M_DEVBUF,
					     M_WAITOK);
	if (!qs->buffer)
		return ENOMEM;

	qcam_reset(qs);
	qcam_default(qs);
	qs->init_req = 1;	/* request initialization before scan */

	qs->flags |= QC_OPEN;

	return 0;
}

STATIC_CDEVSW int
qcam_close (dev_t dev, int flags, int fmt, struct proc *p)
{
	struct qcam_softc *qs = &qcam_softc[UNIT(dev)];

	if (qs->buffer) {
	    free(qs->buffer, M_DEVBUF);
	    qs->buffer = NULL;
	    qs->buffer_end = NULL;
	}

	qs->flags &= ~QC_OPEN;
	return 0;
}

STATIC_CDEVSW int
qcam_read (dev_t dev, struct uio *uio, int ioflag)
{
	struct qcam_softc *qs = &qcam_softc[UNIT(dev)];
	int bytes, bufsize;
	int error;

	/* if we've seeked back to 0, that's our signal to scan */
	if (uio->uio_offset == 0)
		if (qcam_scan(qs))
			return EIO;

	bufsize = qs->buffer_end - qs->buffer;
	if (uio->uio_offset > bufsize)
		return EIO;

	bytes = min(uio->uio_resid, (bufsize - uio->uio_offset));
	error = uiomove(qs->buffer + uio->uio_offset, bytes, uio);
	if (error)
		return error;

	return 0;		/* success */
}

STATIC_CDEVSW int
qcam_ioctl (dev_t dev, int cmd, caddr_t data, int flag, struct proc *p)
{
	struct qcam_softc *qs = &qcam_softc[UNIT(dev)];
	struct qcam      *info = (struct qcam *)data;

	if (!data)
		return(EINVAL);

	switch (cmd) {
	case QC_GET:
		return qcam_ioctl_get(qs, info) ? EINVAL : 0;

	case QC_SET:
		return qcam_ioctl_set(qs, info) ? EINVAL : 0;

	default:
		return(ENOTTY);
	}

	return 0;
}

#ifdef QCAM_MODULE

#include <sys/exec.h>
#include <sys/sysent.h>
#include <sys/sysproto.h>
#include <sys/lkm.h>

static struct isa_device qcam_mod_dev =
	{0, &qcamdriver, IO_LPT1, 0, -1, (caddr_t) 0, 0, 0, 0, 0, 0, 0, 0,
	 0, 1, 0, 0};

MOD_DEV(qcam, LM_DT_CHAR, CDEV_MAJOR, &qcam_cdevsw);

static int 
qcam_load (struct lkm_table *lkmtp, int cmd)
{
	if (qcam_probe(&qcam_mod_dev)) {
	 	qcam_attach(&qcam_mod_dev);

		qcam_drvinit(NULL); /* XXX this shouldn't NEED to be here
				     * the LKM code should be doing this
				     * for us! */

	 	uprintf("qcam: driver loaded\n");
		return 0;
	} else {
		uprintf("qcam: probe failed\n");
		return 1;
	}
}

static int
qcam_unload (struct lkm_table *lkmtp, int cmd)
{
	struct qcam_softc *qs;
	int i;

	for (i = 0; i < NQCAM; i++) {
		qs = &qcam_softc[i];
		if (qs->flags & QC_OPEN) {
			uprintf("qcam%d: cannot unload, device busy", qs->unit);
			return 1;
		}
	}

	uprintf("qcam: driver unloaded\n");
	return 0;
}

static int
qcam_stat (struct lkm_table *lkmtp, int cmd)
{
	return 0;
}

int
qcam_mod (struct lkm_table *lkmtp, int cmd, int ver)
{
	MOD_DISPATCH(qcam, lkmtp, cmd, ver,
		qcam_load, qcam_unload, qcam_stat);
}

#endif /* QCAM_MODULE */
#endif /* NQCAM */