mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-28 11:57:28 +00:00
8e5d93dbb4
the NIC drivers as well as the PHY drivers to take advantage of the
mii_attach() introduced in r213878 to get rid of certain hacks. For
the most part these were:
- Artificially limiting miibus_{read,write}reg methods to certain PHY
addresses; we now let mii_attach() only probe the PHY at the desired
address(es) instead.
- PHY drivers setting MIIF_* flags based on the NIC driver they hang
off from, partly even based on grabbing and using the softc of the
parent; we now pass these flags down from the NIC to the PHY drivers
via mii_attach(). This got us rid of all such hacks except those of
brgphy() in combination with bce(4) and bge(4), which is way beyond
what can be expressed with simple flags.
While at it, I took the opportunity to change the NIC drivers to pass
up the error returned by mii_attach() (previously by mii_phy_probe())
and unify the error message used in this case where and as appropriate
as mii_attach() actually can fail for a number of reasons, not just
because of no PHY(s) being present at the expected address(es).
Reviewed by: jhb, yongari
359 lines
9.9 KiB
C
359 lines
9.9 KiB
C
/* $NetBSD: nsphy.c,v 1.18 1999/07/14 23:57:36 thorpej Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* driver for National Semiconductor's DP83840A ethernet 10/100 PHY
|
|
* Data Sheet available from www.national.com
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
#include "miidevs.h"
|
|
|
|
#include <dev/mii/nsphyreg.h>
|
|
|
|
#include "miibus_if.h"
|
|
|
|
static int nsphy_probe(device_t);
|
|
static int nsphy_attach(device_t);
|
|
|
|
static device_method_t nsphy_methods[] = {
|
|
/* device interface */
|
|
DEVMETHOD(device_probe, nsphy_probe),
|
|
DEVMETHOD(device_attach, nsphy_attach),
|
|
DEVMETHOD(device_detach, mii_phy_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static devclass_t nsphy_devclass;
|
|
|
|
static driver_t nsphy_driver = {
|
|
"nsphy",
|
|
nsphy_methods,
|
|
sizeof(struct mii_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(nsphy, miibus, nsphy_driver, nsphy_devclass, 0, 0);
|
|
|
|
static int nsphy_service(struct mii_softc *, struct mii_data *, int);
|
|
static void nsphy_status(struct mii_softc *);
|
|
static void nsphy_reset(struct mii_softc *);
|
|
|
|
static const struct mii_phydesc nsphys[] = {
|
|
MII_PHY_DESC(NATSEMI, DP83840),
|
|
MII_PHY_END
|
|
};
|
|
|
|
static int
|
|
nsphy_probe(device_t dev)
|
|
{
|
|
|
|
return (mii_phy_dev_probe(dev, nsphys, BUS_PROBE_DEFAULT));
|
|
}
|
|
|
|
static int
|
|
nsphy_attach(device_t dev)
|
|
{
|
|
struct mii_softc *sc;
|
|
struct mii_attach_args *ma;
|
|
struct mii_data *mii;
|
|
const char *nic;
|
|
|
|
sc = device_get_softc(dev);
|
|
ma = device_get_ivars(dev);
|
|
sc->mii_dev = device_get_parent(dev);
|
|
mii = ma->mii_data;
|
|
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
|
|
|
|
sc->mii_flags = miibus_get_flags(dev);
|
|
sc->mii_inst = mii->mii_instance++;
|
|
sc->mii_phy = ma->mii_phyno;
|
|
sc->mii_service = nsphy_service;
|
|
sc->mii_pdata = mii;
|
|
|
|
nic = device_get_name(device_get_parent(sc->mii_dev));
|
|
/*
|
|
* Am79C971 wedge when isolating all of their external PHYs.
|
|
*/
|
|
if (strcmp(nic, "pcn") == 0)
|
|
sc->mii_flags |= MIIF_NOISOLATE;
|
|
|
|
#if 1
|
|
|
|
#define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL)
|
|
|
|
/*
|
|
* XXX IFM_LOOP should be handled by mii_phy_add_media() based
|
|
* on MIIF_NOLOOP.
|
|
*/
|
|
if ((sc->mii_flags & MIIF_NOLOOP) == 0)
|
|
ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP,
|
|
sc->mii_inst), MII_MEDIA_100_TX);
|
|
|
|
#endif
|
|
|
|
nsphy_reset(sc);
|
|
|
|
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
|
|
device_printf(dev, " ");
|
|
mii_phy_add_media(sc);
|
|
printf("\n");
|
|
|
|
MIIBUS_MEDIAINIT(sc->mii_dev);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
nsphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
|
|
{
|
|
int reg;
|
|
|
|
switch (cmd) {
|
|
case MII_POLLSTAT:
|
|
break;
|
|
|
|
case MII_MEDIACHG:
|
|
/*
|
|
* If the interface is not up, don't do anything.
|
|
*/
|
|
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
|
|
break;
|
|
|
|
reg = PHY_READ(sc, MII_NSPHY_PCR);
|
|
|
|
/*
|
|
* Set up the PCR to use LED4 to indicate full-duplex
|
|
* in both 10baseT and 100baseTX modes.
|
|
*/
|
|
reg |= PCR_LED4MODE;
|
|
|
|
/*
|
|
* Make sure Carrier Integrity Monitor function is
|
|
* disabled (normal for Node operation, but sometimes
|
|
* it's not set?!)
|
|
*/
|
|
reg |= PCR_CIMDIS;
|
|
|
|
/*
|
|
* Make sure "force link good" is set to normal mode.
|
|
* It's only intended for debugging.
|
|
*/
|
|
reg |= PCR_FLINK100;
|
|
|
|
/*
|
|
* Mystery bits which are supposedly `reserved',
|
|
* but we seem to need to set them when the PHY
|
|
* is connected to some interfaces:
|
|
*
|
|
* 0x0400 is needed for fxp
|
|
* (Intel EtherExpress Pro 10+/100B, 82557 chip)
|
|
* (nsphy with a DP83840 chip)
|
|
* 0x0100 may be needed for some other card
|
|
*/
|
|
reg |= 0x0100 | 0x0400;
|
|
|
|
if (strcmp(mii->mii_ifp->if_dname, "fxp") == 0)
|
|
PHY_WRITE(sc, MII_NSPHY_PCR, reg);
|
|
|
|
mii_phy_setmedia(sc);
|
|
break;
|
|
|
|
case MII_TICK:
|
|
if (mii_phy_tick(sc) == EJUSTRETURN)
|
|
return (0);
|
|
break;
|
|
}
|
|
|
|
/* Update the media status. */
|
|
nsphy_status(sc);
|
|
|
|
/* Callback if something changed. */
|
|
mii_phy_update(sc, cmd);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
nsphy_status(struct mii_softc *sc)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
int bmsr, bmcr, par, anlpar;
|
|
|
|
mii->mii_media_status = IFM_AVALID;
|
|
mii->mii_media_active = IFM_ETHER;
|
|
|
|
bmsr = PHY_READ(sc, MII_BMSR) |
|
|
PHY_READ(sc, MII_BMSR);
|
|
if (bmsr & BMSR_LINK)
|
|
mii->mii_media_status |= IFM_ACTIVE;
|
|
|
|
bmcr = PHY_READ(sc, MII_BMCR);
|
|
if (bmcr & BMCR_ISO) {
|
|
mii->mii_media_active |= IFM_NONE;
|
|
mii->mii_media_status = 0;
|
|
return;
|
|
}
|
|
|
|
if (bmcr & BMCR_LOOP)
|
|
mii->mii_media_active |= IFM_LOOP;
|
|
|
|
if (bmcr & BMCR_AUTOEN) {
|
|
/*
|
|
* The PAR status bits are only valid if autonegotiation
|
|
* has completed (or it's disabled).
|
|
*/
|
|
if ((bmsr & BMSR_ACOMP) == 0) {
|
|
/* Erg, still trying, I guess... */
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Argh. The PAR doesn't seem to indicate duplex mode
|
|
* properly! Determine media based on link partner's
|
|
* advertised capabilities.
|
|
*/
|
|
if (PHY_READ(sc, MII_ANER) & ANER_LPAN) {
|
|
anlpar = PHY_READ(sc, MII_ANAR) &
|
|
PHY_READ(sc, MII_ANLPAR);
|
|
if (anlpar & ANLPAR_TX_FD)
|
|
mii->mii_media_active |= IFM_100_TX|IFM_FDX;
|
|
else if (anlpar & ANLPAR_T4)
|
|
mii->mii_media_active |= IFM_100_T4|IFM_HDX;
|
|
else if (anlpar & ANLPAR_TX)
|
|
mii->mii_media_active |= IFM_100_TX|IFM_HDX;
|
|
else if (anlpar & ANLPAR_10_FD)
|
|
mii->mii_media_active |= IFM_10_T|IFM_FDX;
|
|
else if (anlpar & ANLPAR_10)
|
|
mii->mii_media_active |= IFM_10_T|IFM_HDX;
|
|
else
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Link partner is not capable of autonegotiation.
|
|
* We will never be in full-duplex mode if this is
|
|
* the case, so reading the PAR is OK.
|
|
*/
|
|
par = PHY_READ(sc, MII_NSPHY_PAR);
|
|
if (par & PAR_10)
|
|
mii->mii_media_active |= IFM_10_T;
|
|
else
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
mii->mii_media_active |= IFM_HDX;
|
|
} else
|
|
mii->mii_media_active = ife->ifm_media;
|
|
}
|
|
|
|
static void
|
|
nsphy_reset(struct mii_softc *sc)
|
|
{
|
|
struct ifmedia_entry *ife = sc->mii_pdata->mii_media.ifm_cur;
|
|
int reg, i;
|
|
|
|
if (sc->mii_flags & MIIF_NOISOLATE)
|
|
reg = BMCR_RESET;
|
|
else
|
|
reg = BMCR_RESET | BMCR_ISO;
|
|
PHY_WRITE(sc, MII_BMCR, reg);
|
|
|
|
/*
|
|
* It is best to allow a little time for the reset to settle
|
|
* in before we start polling the BMCR again. Notably, the
|
|
* DP83840A manuals state that there should be a 500us delay
|
|
* between asserting software reset and attempting MII serial
|
|
* operations. Be conservative.
|
|
*/
|
|
DELAY(1000);
|
|
|
|
/*
|
|
* Wait another 2s for it to complete.
|
|
* This is only a little overkill as under normal circumstances
|
|
* the PHY can take up to 1s to complete reset.
|
|
* This is also a bit odd because after a reset, the BMCR will
|
|
* clear the reset bit and simply reports 0 even though the reset
|
|
* is not yet complete.
|
|
*/
|
|
for (i = 0; i < 1000; i++) {
|
|
reg = PHY_READ(sc, MII_BMCR);
|
|
if (reg != 0 && (reg & BMCR_RESET) == 0)
|
|
break;
|
|
DELAY(2000);
|
|
}
|
|
|
|
if ((sc->mii_flags & MIIF_NOISOLATE) == 0) {
|
|
if ((ife == NULL && sc->mii_inst != 0) ||
|
|
(ife != NULL && IFM_INST(ife->ifm_media) != sc->mii_inst))
|
|
PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
|
|
}
|
|
}
|