1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-11-28 08:02:54 +00:00
freebsd/sys/cam/cam_debug.h
Alexander Motin 431d3a5bfc Replace several instances of -1 with appropriate CAM_*_WILDCARD and types.
It was equal before r259397, but for good or bad, not any more for LUNs.

This change fixes at least CAM debugging.
2014-01-10 12:18:05 +00:00

139 lines
4.3 KiB
C

/*-
* Macros for tracing/loging information in the CAM layer
*
* Copyright (c) 1997 Justin T. Gibbs.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _CAM_CAM_DEBUG_H
#define _CAM_CAM_DEBUG_H 1
/*
* Debugging flags.
*/
typedef enum {
CAM_DEBUG_NONE = 0x00, /* no debugging */
CAM_DEBUG_INFO = 0x01, /* scsi commands, errors, data */
CAM_DEBUG_TRACE = 0x02, /* routine flow tracking */
CAM_DEBUG_SUBTRACE = 0x04, /* internal to routine flows */
CAM_DEBUG_CDB = 0x08, /* print out SCSI CDBs only */
CAM_DEBUG_XPT = 0x10, /* print out xpt scheduling */
CAM_DEBUG_PERIPH = 0x20, /* print out peripheral calls */
CAM_DEBUG_PROBE = 0x40 /* print out probe actions */
} cam_debug_flags;
#if defined(_KERNEL)
#ifndef CAM_DEBUG_FLAGS
#define CAM_DEBUG_FLAGS CAM_DEBUG_NONE
#endif
#ifndef CAM_DEBUG_COMPILE
#ifdef CAMDEBUG
#define CAM_DEBUG_COMPILE (-1)
#else
#define CAM_DEBUG_COMPILE (CAM_DEBUG_INFO | CAM_DEBUG_CDB | \
CAM_DEBUG_PERIPH | CAM_DEBUG_PROBE | \
CAM_DEBUG_FLAGS)
#endif
#endif
#ifndef CAM_DEBUG_BUS
#define CAM_DEBUG_BUS CAM_BUS_WILDCARD
#endif
#ifndef CAM_DEBUG_TARGET
#define CAM_DEBUG_TARGET CAM_TARGET_WILDCARD
#endif
#ifndef CAM_DEBUG_LUN
#define CAM_DEBUG_LUN CAM_LUN_WILDCARD
#endif
#ifndef CAM_DEBUG_DELAY
#define CAM_DEBUG_DELAY 0
#endif
/* Path we want to debug */
extern struct cam_path *cam_dpath;
/* Current debug levels set */
extern u_int32_t cam_dflags;
/* Printf delay value (to prevent scrolling) */
extern u_int32_t cam_debug_delay;
/* Debugging macros. */
#define CAM_DEBUGGED(path, flag) \
(((flag) & (CAM_DEBUG_COMPILE) & cam_dflags) \
&& (cam_dpath != NULL) \
&& (xpt_path_comp(cam_dpath, path) >= 0) \
&& (xpt_path_comp(cam_dpath, path) < 2))
#define CAM_DEBUG(path, flag, printfargs) \
if (((flag) & (CAM_DEBUG_COMPILE) & cam_dflags) \
&& (cam_dpath != NULL) \
&& (xpt_path_comp(cam_dpath, path) >= 0) \
&& (xpt_path_comp(cam_dpath, path) < 2)) { \
xpt_print_path(path); \
printf printfargs; \
if (cam_debug_delay != 0) \
DELAY(cam_debug_delay); \
}
#define CAM_DEBUG_DEV(dev, flag, printfargs) \
if (((flag) & (CAM_DEBUG_COMPILE) & cam_dflags) \
&& (cam_dpath != NULL) \
&& (xpt_path_comp_dev(cam_dpath, dev) >= 0) \
&& (xpt_path_comp_dev(cam_dpath, dev) < 2)) { \
xpt_print_device(dev); \
printf printfargs; \
if (cam_debug_delay != 0) \
DELAY(cam_debug_delay); \
}
#define CAM_DEBUG_PRINT(flag, printfargs) \
if (((flag) & (CAM_DEBUG_COMPILE) & cam_dflags)) { \
printf("cam_debug: "); \
printf printfargs; \
if (cam_debug_delay != 0) \
DELAY(cam_debug_delay); \
}
#define CAM_DEBUG_PATH_PRINT(flag, path, printfargs) \
if (((flag) & (CAM_DEBUG_COMPILE) & cam_dflags)) { \
xpt_print(path, "cam_debug: "); \
printf printfargs; \
if (cam_debug_delay != 0) \
DELAY(cam_debug_delay); \
}
#else /* !_KERNEL */
#define CAM_DEBUGGED(A, B) 0
#define CAM_DEBUG(A, B, C)
#define CAM_DEBUG_PRINT(A, B)
#define CAM_DEBUG_PATH_PRINT(A, B, C)
#endif /* _KERNEL */
#endif /* _CAM_CAM_DEBUG_H */