1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-25 11:37:56 +00:00
freebsd/contrib/gcc/Makefile.in
1996-09-18 06:37:22 +00:00

2545 lines
98 KiB
Makefile
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Makefile for GNU C compiler.
# Copyright (C) 1987, 88, 90-94, 1995 Free Software Foundation, Inc.
#This file is part of GNU CC.
#GNU CC is free software; you can redistribute it and/or modify
#it under the terms of the GNU General Public License as published by
#the Free Software Foundation; either version 2, or (at your option)
#any later version.
#GNU CC is distributed in the hope that it will be useful,
#but WITHOUT ANY WARRANTY; without even the implied warranty of
#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
#GNU General Public License for more details.
#You should have received a copy of the GNU General Public License
#along with GNU CC; see the file COPYING. If not, write to
#the Free Software Foundation, 59 Temple Place - Suite 330,
#Boston MA 02111-1307, USA.
# The targets for external use include:
# all, doc, proto, install, install-cross, install-cross-rest,
# uninstall, TAGS, mostlyclean, clean, distclean, maintainer-clean,
# stage1, stage2, stage3, stage4.
# Suppress smart makes who think they know how to automake Yacc files
.y.c:
# Variables that exist for you to override.
# See below for how to change them for certain systems.
# List of language subdirectories.
# This is overridden by configure.
SUBDIRS =
# Selection of languages to be made.
# This is overridden by configure.
LANGUAGES = c objective-c proto
ALLOCA =
ALLOCA_FLAGS =
ALLOCA_FINISH = true
# Various ways of specifying flags for compilations:
# CFLAGS is for the user to override to, e.g., do a bootstrap with -O2.
# BOOT_CFLAGS is the value of CFLAGS to pass
# to the stage2 and stage3 compilations
# XCFLAGS is used for most compilations but not when using the GCC just built.
XCFLAGS =
CFLAGS = -g
BOOT_CFLAGS = -O $(CFLAGS)
# These exists to be overridden by the x-* and t-* files, respectively.
X_CFLAGS =
T_CFLAGS =
X_CPPFLAGS =
T_CPPFLAGS =
CC = cc
BISON = bison
BISONFLAGS =
LEX = flex
LEXFLAGS =
AR = ar
OLDAR_FLAGS = qc
AR_FLAGS = rc
SHELL = /bin/sh
# on sysV, define this as cp.
INSTALL = install -c
# These permit overriding just for certain files.
INSTALL_PROGRAM = $(INSTALL)
INSTALL_DATA = $(INSTALL)
MAKEINFO = makeinfo
TEXI2DVI = texi2dvi
# For GNUmake: let us decide what gets passed to recursive makes.
MAKEOVERRIDES =
# Define this as & to perform parallel make on a Sequent.
# Note that this has some bugs, and it seems currently necessary
# to compile all the gen* files first by hand to avoid erroneous results.
P =
# How to invoke ranlib.
RANLIB = ranlib
# Test to use to see whether ranlib exists on the system.
RANLIB_TEST = [ -f /usr/bin/ranlib -o -f /bin/ranlib ]
# Compiler to use for compiling libgcc1.a.
# OLDCC should not be the GNU C compiler,
# since that would compile typical libgcc1.a functions such as mulsi3
# into infinite recursions.
OLDCC = cc
# CFLAGS for use with OLDCC, for compiling libgcc1.a.
# NOTE: -O does not work on some Unix systems!
CCLIBFLAGS = -O
# Version of ar to use when compiling libgcc1.a.
OLDAR = ar
# Target to use when installing include directory. Either
# install-headers-tar or install-headers-cpio.
INSTALL_HEADERS_DIR = install-headers-tar
# Header files that are made available under the same name
# to programs compiled with GCC.
USER_H = $(srcdir)/ginclude/stdarg.h $(srcdir)/ginclude/stddef.h \
$(srcdir)/ginclude/varargs.h $(srcdir)/ginclude/va-alpha.h \
$(srcdir)/ginclude/va-h8300.h $(srcdir)/ginclude/va-i860.h \
$(srcdir)/ginclude/va-i960.h $(srcdir)/ginclude/va-mips.h \
$(srcdir)/ginclude/va-m88k.h $(srcdir)/ginclude/va-pa.h \
$(srcdir)/ginclude/va-pyr.h $(srcdir)/ginclude/va-sparc.h \
$(srcdir)/ginclude/va-clipper.h $(srcdir)/ginclude/va-spur.h \
$(srcdir)/ginclude/iso646.h $(srcdir)/ginclude/va-ppc.h \
$(srcdir)/ginclude/proto.h $(EXTRA_HEADERS)
# Target to use whe installing assert.h. Some systems may
# want to set this empty.
INSTALL_ASSERT_H = install-assert-h
# The GCC to use for compiling libgcc2.a, enquire, and libgcc1-test.
# Usually the one we just built.
# Don't use this as a dependency--use $(GCC_PASSES) or $(GCC_PARTS).
GCC_FOR_TARGET = ./xgcc -B./
# This is used instead of ALL_CFLAGS when compiling with GCC_FOR_TARGET.
# It omits XCFLAGS, and specifies -B./.
# It also specifies -I./include to find, e.g., stddef.h.
GCC_CFLAGS=$(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) -I./include
# Special flags for compiling enquire.
# We disable optimization to make floating point more reliable.
ENQUIRE_CFLAGS = -DNO_MEM -DNO_LONG_DOUBLE_IO -O0
ENQUIRE_LDFLAGS = $(LDFLAGS)
# Sed command to transform gcc to installed name. Overwritten by configure.
program_transform_name = -e s,x,x,
program_transform_cross_name = -e s,^,$(target)-,
# Tools to use when building a cross-compiler.
# These are used because `configure' appends `cross-make'
# to the makefile when making a cross-compiler.
TARGET_TOOLPREFIX = $(tooldir)/bin/
AR_FOR_TARGET = $(TARGET_TOOLPREFIX)ar
AR_FOR_TARGET_FLAGS = rc
RANLIB_FOR_TARGET = $(TARGET_TOOLPREFIX)ranlib
RANLIB_TEST_FOR_TARGET = [ -f $(TARGET_TOOLPREFIX)ranlib ]
# Dir to search for system headers. Overridden by cross-make.
SYSTEM_HEADER_DIR = /usr/include
# Control whether to run fixproto.
STMP_FIXPROTO = stmp-fixproto
# Test to see whether <limits.h> exists in the system header files.
LIMITS_H_TEST = [ -f $(SYSTEM_HEADER_DIR)/limits.h ]
# There may be a premade insn-attrtab.c for this machine.
# (You could rebuild it with genattrtab as usual, but it takes a long time.)
# PREMADE_ATTRTAB is the file name of the file to use.
# PREMADE_ATTRTAB_MD is the md file it corresponds to.
PREMADE_ATTRTAB_MD = Makefile # Guaranteed not to cmp equal to md.
PREMADE_ATTRTAB =
target= ... `configure' substitutes actual target name here.
xmake_file= ... `configure' substitutes actual x- file name here.
tmake_file= ... `configure' substitutes actual t- file name here.
out_file= ... `configure' substitutes actual out file name here.
out_object_file= ... `configure' substitutes actual out object file name here.
md_file= ... `configure' substitutes actual md file name here.
tm_file= ... `configure' substitutes actual tm file name here.
build_xm_file= ... `configure' substitutes actual build xm- file name here.
host_xm_file= ... `configure' substitutes actual host xm- file name here.
lang_specs_files= ... `configure' substitutes actual lang spec file names here.
lang_options_files= ... `configure' puts actual lang options file names here.
version=`sed -e 's/.*\"\([^ \"]*\)[ \"].*/\1/' < $(srcdir)/version.c`
mainversion=`sed -e 's/.*\"\([0-9]*\.[0-9]*\).*/\1/' < $(srcdir)/version.c`
# Directory where sources are, from where we are.
srcdir = .
# Common prefix for installation directories.
# NOTE: This directory must exist when you start installation.
prefix = /usr/local
# Directory in which to put localized header files. On the systems with
# gcc as the native cc, `local_prefix' may not be `prefix' which is
# `/usr'.
# NOTE: local_prefix *should not* default from prefix.
local_prefix = /usr/local
# Directory in which to put host dependent programs and libraries
exec_prefix = $(prefix)
# Directory in which to put the executable for the command `gcc'
bindir = $(exec_prefix)/bin
# Directory in which to put the directories used by the compiler.
libdir = $(exec_prefix)/lib
# Directory in which the compiler finds executables, libraries, etc.
libsubdir = $(libdir)/gcc-lib/$(target)/$(version)
# Directory in which the compiler finds g++ includes.
gxx_include_dir= $(libdir)/g++-include
# Directory to search for site-specific includes.
includedir = $(local_prefix)/include
# assertdir is overridden in cross-make.
# (But this currently agrees with what is in cross-make.)
assertdir = $(tooldir)/include
# where the info files go
infodir = $(prefix)/info
# Extension (if any) to put in installed man-page filename.
manext = .1
objext = .o
exeext =
# Directory in which to put man pages.
mandir = $(prefix)/man/man1
# Directory in which to find other cross-compilation tools and headers.
# Used in install-cross.
tooldir = $(exec_prefix)/$(target)
# Dir for temp files.
tmpdir = /tmp
# Additional system libraries to link with.
CLIB=
# Change this to a null string if obstacks are installed in the
# system library.
OBSTACK=obstack.o
# Specify the rule for actually making libgcc.a,
LIBGCC = libgcc.a
# and the rule for installing it.
INSTALL_LIBGCC = install-libgcc
# Specify the rule for actually making libgcc1.a.
# The value may be empty; that means to do absolutely nothing
# with or for libgcc1.a.
LIBGCC1 = libgcc1.a
# Specify the rule for making libgcc1.a for a cross-compiler.
# The default rule assumes that libgcc1.a is supplied by the user.
CROSS_LIBGCC1 = libgcc1.cross
# Specify the rule for actually making libgcc2.a.
LIBGCC2 = libgcc2.a
# Options to use when compiling libgcc2.a.
# -g1 causes output of debug info only for file-scope entities.
# we use this here because that should be enough, and also
# so that -g1 will be tested.
LIBGCC2_CFLAGS = -O2 $(LIBGCC2_INCLUDES) $(GCC_CFLAGS) $(TARGET_LIBGCC2_CFLAGS) -g1 -g0
# Additional options to use when compiling libgcc2.a.
# Some targets override this to -Iinclude
LIBGCC2_INCLUDES =
# Additional target-dependent options for compiling libgcc2.a.
TARGET_LIBGCC2_CFLAGS =
# Things which must be built before building libgcc2.a.
# Some targets override this to stmp-int-hdrs
LIBGCC2_DEPS =
# Enquire target (This is a variable so that a target can choose not to
# build it.)
ENQUIRE = enquire
# libgcc1-test target (must also be overridable for a target)
LIBGCC1_TEST = libgcc1-test
# List of extra executables that should be compiled for this target machine
# that are used for compiling from source code to object code.
# The rules for compiling them should be in the t-* file for the machine.
EXTRA_PASSES =
# Like EXTRA_PASSES, but these are used when linking.
EXTRA_PROGRAMS =
# List of extra object files that should be compiled for this target machine.
# The rules for compiling them should be in the t-* file for the machine.
EXTRA_PARTS =
# List of extra object files that should be compiled and linked with
# compiler proper (cc1, cc1obj, cc1plus).
EXTRA_OBJS =
# List of extra object files that should be compiled and linked with
# the gcc driver.
EXTRA_GCC_OBJS =
# List of additional header files to install.
# Often this is edited directly by `configure'.
EXTRA_HEADERS =
# Set this to `ld' to enable use of collect2.
# USE_COLLECT2 =
# It is convenient for configure to add the assignment at the beginning,
# so don't override it here.
# List of extra C and assembler files to add to libgcc1.a.
# Assembler files should have names ending in `.asm'.
LIB1FUNCS_EXTRA =
# List of extra C and assembler files to add to libgcc2.a.
# Assembler files should have names ending in `.asm'.
LIB2FUNCS_EXTRA =
# Default float.h source to use for cross-compiler.
CROSS_FLOAT_H=float.h-cross
# Program to convert libraries.
LIBCONVERT =
# Control whether header files are installed.
INSTALL_HEADERS=install-headers
# Options for tar when copying trees. So HPUX can override it.
TAROUTOPTS = xpBf
# Select which version of fixincludes to use (I.E. regular versus SVR4)
# This value is overridden directly by configure.
FIXINCLUDES=fixincludes
# Additional directories of header files to run fixincludes on.
# These should be directories searched automatically by default
# just as /usr/include is.
# *Do not* use this for directories that happen to contain
# header files, but are not searched automatically by default.
# On most systems, this is empty.
OTHER_FIXINCLUDES_DIRS=
# List of things which should already be built whenever we try to use xgcc
# to compile anything (without linking).
GCC_PASSES=xgcc cc1 cpp $(EXTRA_PASSES)
# List of things which should already be built whenever we try to use xgcc
# to link anything.
GCC_PARTS=$(GCC_PASSES) $(LIBGCC) $(EXTRA_PROGRAMS) $(USE_COLLECT2) $(EXTRA_PARTS)
# Directory to link to, when using the target `maketest'.
DIR = ../gcc
# Guaranteed to not exist when not passing md through cpp.
# This value is overridden directly by configure.
MD_FILE = md-cpp-not-used
# Flags to use when cross-building GCC.
# Prefix to apply to names of object files when using them
# to run on the machine we are compiling on.
HOST_PREFIX=
# Prefix to apply to names of object files when compiling them
# to run on the machine we are compiling on.
# The default for this variable is chosen to keep these rules
# out of the way of the other rules for compiling the same source files.
HOST_PREFIX_1=loser-
HOST_CC=$(CC)
HOST_CFLAGS=$(ALL_CFLAGS)
HOST_CLIB=$(CLIB)
HOST_LDFLAGS=$(LDFLAGS)
HOST_CPPFLAGS=$(ALL_CPPFLAGS)
HOST_ALLOCA=$(ALLOCA)
HOST_MALLOC=$(MALLOC)
HOST_OBSTACK=$(OBSTACK)
# Actual name to use when installing a native compiler.
GCC_INSTALL_NAME = `t='$(program_transform_name)'; echo gcc | sed $$t`
# Actual name to use when installing a cross-compiler.
GCC_CROSS_NAME = `t='$(program_transform_cross_name)'; echo gcc | sed $$t`
# Choose the real default target.
ALL=all.internal
# Choose the real install target.
INSTALL_TARGET=install-normal
# Source for float.h. Overridden by cross-make.
FLOAT_H=float.h-nat
# Extra symbols for fixproto to define when parsing headers.
FIXPROTO_DEFINES =
# Extra flags to use when compiling crt{begin,end}.o.
CRTSTUFF_T_CFLAGS =
# End of variables for you to override.
# Definition of `all' is here so that new rules inserted by sed
# do not specify the default target.
# The real definition is under `all.internal' (for native compilers)
# or `all.cross' (for cross compilers).
all: all.indirect
# This tells GNU Make version 3 not to put all variables in the environment.
.NOEXPORT:
# sed inserts variable overrides after the following line.
####target overrides
####host overrides
####cross overrides
####build overrides
# Now figure out from those variables how to compile and link.
all.indirect: $(ALL)
# IN_GCC tells obstack.h that we are using gcc's <stddef.h> file.
# ??? IN_GCC should be obsolete now.
INTERNAL_CFLAGS = $(CROSS) -DIN_GCC
# This is the variable actually used when we compile.
ALL_CFLAGS = $(INTERNAL_CFLAGS) $(X_CFLAGS) $(T_CFLAGS) $(CFLAGS) $(XCFLAGS)
# Likewise.
ALL_CPPFLAGS = $(CPPFLAGS) $(X_CPPFLAGS) $(T_CPPFLAGS)
# Even if ALLOCA is set, don't use it if compiling with GCC.
USE_ALLOCA= ` case "${CC}" in "${OLDCC}") echo "${ALLOCA}" ;; esac `
USE_HOST_ALLOCA= ` case "${HOST_CC}"@"${HOST_ALLOCA}" in "${OLDCC}"@?*) echo ${HOST_PREFIX}${HOST_ALLOCA} ;; esac `
USE_HOST_MALLOC= ` case "${HOST_MALLOC}" in ?*) echo ${HOST_PREFIX}${HOST_MALLOC} ;; esac `
USE_HOST_OBSTACK= ` case "${HOST_OBSTACK}" in ?*) echo ${HOST_PREFIX}${HOST_OBSTACK} ;; esac `
# Dependency on obstack, alloca, malloc or whatever library facilities
# are not installed in the system libraries.
# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
LIBDEPS= $(OBSTACK) $(ALLOCA) $(MALLOC)
# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
# We don't use USE_ALLOCA because backquote expansion doesn't work in deps.
HOST_LIBDEPS= $(HOST_PREFIX)$(HOST_OBSTACK) $(HOST_PREFIX)$(HOST_ALLOCA) $(HOST_PREFIX)$(HOST_MALLOC)
# How to link with both our special library facilities
# and the system's installed libraries.
LIBS = $(OBSTACK) $(USE_ALLOCA) $(MALLOC) $(CLIB)
# Likewise, for use in the tools that must run on this machine
# even if we are cross-building GCC.
HOST_LIBS = $(USE_HOST_OBSTACK) $(USE_HOST_ALLOCA) $(USE_HOST_MALLOC) \
$(HOST_CLIB)
HOST_RTL = $(HOST_PREFIX)rtl.o
HOST_RTLANAL = $(HOST_PREFIX)rtlanal.o
HOST_PRINT = $(HOST_PREFIX)print-rtl.o
# Specify the directories to be searched for header files.
# Both . and srcdir are used, in that order,
# so that tm.h and config.h will be found in the compilation
# subdirectory rather than in the source directory.
INCLUDES = -I. -I$(srcdir) -I$(srcdir)/config
# Always use -I$(srcdir)/config when compiling.
.c.o:
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $<
# This tells GNU make version 3 not to export all the variables
# defined in this file into the environment.
.NOEXPORT:
# Support for additional languages (other than c and objc).
# ??? objc can be supported this way too (leave for later).
# These next lines are overridden by configure.
LANG_MAKEFILES =
LANG_STAGESTUFF =
LANG_DIFF_EXCLUDES =
# Flags to pass to recursive makes.
# CC is set by configure. Hosts without symlinks need special handling
# because we need CC="stage1/xgcc -Bstage1/" to work in the language
# subdirectories.
# ??? The choices here will need some experimenting with.
FLAGS_TO_PASS = \
"AR_FLAGS=$(AR_FLAGS)" \
"AR_FOR_TARGET=$(AR_FOR_TARGET)" \
"BISON=$(BISON)" \
"BISONFLAGS=$(BISONFLAGS)" \
"CC=set-by-configure" \
"CFLAGS=$(CFLAGS)" \
"GCC_FOR_TARGET=$(GCC_FOR_TARGET)" \
"LDFLAGS=$(LDFLAGS)" \
"LEX=$(LEX)" \
"LEXFLAGS=$(LEXFLAGS)" \
"MAKEINFO=$(MAKEINFO)" \
"MAKEINFOFLAGS=$(MAKEINFOFLAGS)" \
"RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \
"RANLIB_TEST_FOR_TARGET=$(RANLIB_TEST_FOR_TARGET)" \
"SHELL=$(SHELL)" \
"exeext=$(exeext)" \
"objext=$(objext)" \
"exec_prefix=$(exec_prefix)" \
"prefix=$(prefix)" \
"tooldir=$(tooldir)" \
"bindir=$(bindir)" \
"libsubdir=$(libsubdir)"
# Lists of files for various purposes.
# A list of all the language-specific executables.
# This is overridden by configure.
COMPILERS = cc1$(exeext) cc1obj$(exeext)
# Language-specific object files for C.
C_OBJS = c-parse.o c-lang.o c-lex.o c-pragma.o \
c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o
# Language-specific object files for Objective C.
OBJC_OBJS = objc-parse.o objc-act.o c-lex.o c-pragma.o \
c-decl.o c-typeck.o c-convert.o c-aux-info.o c-common.o c-iterate.o
# Files specific to the C interpreter bytecode compiler(s).
BC_OBJS = bc-emit.o bc-optab.o
# Bytecode header files constructed at build time; vmsconfig.com wants this.
BC_ALL = bc-arity.h bc-opcode.h bc-opname.h
# Language-independent object files.
OBJS = toplev.o version.o tree.o print-tree.o stor-layout.o fold-const.o \
function.o stmt.o expr.o calls.o expmed.o explow.o optabs.o varasm.o \
rtl.o print-rtl.o rtlanal.o emit-rtl.o real.o \
dbxout.o sdbout.o dwarfout.o xcoffout.o \
integrate.o jump.o cse.o loop.o unroll.o flow.o stupid.o combine.o \
regclass.o local-alloc.o global.o reload.o reload1.o caller-save.o \
insn-peep.o reorg.o sched.o final.o recog.o reg-stack.o \
insn-opinit.o insn-recog.o insn-extract.o insn-output.o insn-emit.o \
insn-attrtab.o $(out_object_file) getpwd.o convert.o $(EXTRA_OBJS)
# GEN files are listed separately, so they can be built before doing parallel
# makes for cc1 or cc1plus. Otherwise sequent parallel make attempts to load
# them before rtl.o is compiled.
GEN= genemit genoutput genrecog genextract genflags gencodes genconfig genpeep
CCCP=cccp
# Uncomment this line if you want to use cppmain (w/cpplib) as cpp.
#CCCP=cppmain
# Files to be copied away after each stage in building.
STAGESTUFF = *$(objext) insn-flags.h insn-config.h insn-codes.h \
insn-output.c insn-recog.c insn-emit.c insn-extract.c insn-peep.c \
insn-attr.h insn-attrtab.c insn-opinit.c \
stamp-flags stamp-config stamp-codes \
stamp-output stamp-recog stamp-emit stamp-extract stamp-peep \
stamp-attr stamp-attrtab stamp-opinit stamp-proto stamp-crt stamp-crtS \
genemit$(exeext) genoutput$(exeext) genrecog$(exeext) genextract$(exeext) \
genflags$(exeext) gencodes$(exeext) genconfig$(exeext) genpeep$(exeext) \
genattrtab$(exeext) genattr$(exeext) genopinit$(exeext) \
$(BC_ALL) \
stamp-bcarity stamp-bcopcode stamp-bcopname \
bi-arity$(exeext) bi-opcode$(exeext) bi-opname$(exeext) \
$(GCC_PASSES) $(EXTRA_PARTS) $(EXTRA_PROGRAMS) gcc-cross$(exeext) \
$(CCCP)$(exeext) cc1obj$(exeext) enquire$(exeext) \
protoize$(exeext) unprotoize$(exeext) \
specs collect2$(exeext) $(USE_COLLECT2) underscore.c \
*.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop \
*.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack \
*.[si] \
$(LANG_STAGESTUFF)
# Members of libgcc1.a.
LIB1FUNCS = _mulsi3 _udivsi3 _divsi3 _umodsi3 _modsi3 \
_lshrsi3 _ashrsi3 _ashlsi3 \
_divdf3 _muldf3 _negdf2 _adddf3 _subdf3 \
_fixdfsi _fixsfsi _floatsidf _floatsisf _truncdfsf2 _extendsfdf2 \
_addsf3 _negsf2 _subsf3 _mulsf3 _divsf3 \
_eqdf2 _nedf2 _gtdf2 _gedf2 _ltdf2 _ledf2 \
_eqsf2 _nesf2 _gtsf2 _gesf2 _ltsf2 _lesf2
# Library members defined in libgcc2.c.
LIB2FUNCS = _muldi3 _divdi3 _moddi3 _udivdi3 _umoddi3 _negdi2 \
_lshrdi3 _ashldi3 _ashrdi3 _ffsdi2 \
_udiv_w_sdiv _udivmoddi4 _cmpdi2 _ucmpdi2 _floatdidf _floatdisf \
_fixunsdfsi _fixunssfsi _fixunsdfdi _fixdfdi _fixunssfdi _fixsfdi \
_fixxfdi _fixunsxfdi _floatdixf _fixunsxfsi \
_fixtfdi _fixunstfdi _floatditf \
__gcc_bcmp _varargs _eprintf _op_new _op_vnew _new_handler _op_delete \
_op_vdel _bb _shtab _clear_cache _trampoline __main _exit _ctors _eh \
_pure
# The files that "belong" in CONFIG_H are deliberately omitted
# because having them there would not be useful in actual practice.
# All they would do is cause complete recompilation every time
# one of the machine description files is edited.
# That may or may not be what one wants to do.
# If it is, rm *.o is an easy way to do it.
# CONFIG_H = $(host_xm_file) $(tm_file)
CONFIG_H =
RTL_H = rtl.h rtl.def machmode.h machmode.def
TREE_H = tree.h real.h tree.def machmode.h machmode.def
BYTECODE_H = bytecode.h bc-emit.h bc-optab.h
# Language makefile fragments.
# The following targets define the interface between us and the languages.
#
# all.build, all.cross, start.encap, rest.encap,
# info, dvi,
# install-normal, install-common, install-info, install-man,
# uninstall, distdir,
# mostlyclean, clean, distclean, extraclean, maintainer-clean,
# stage1, stage2, stage3, stage4
#
# Each language is linked in with a series of hooks (since we can't use `::'
# targets). The name of each hooked is "lang.${target_name}" (eg: lang.info).
# Configure computes and adds these here.
####language hooks
# sed inserts language fragments after the following line.
####language fragments
# End of language makefile fragments.
# Avoid a lot of time thinking about remaking Makefile.in and *.def.
.SUFFIXES: .in .def
Makefile: $(srcdir)/Makefile.in $(srcdir)/configure $(srcdir)/version.c \
$(srcdir)/config/$(xmake_file) $(srcdir)/config/$(tmake_file) \
$(LANG_MAKEFILES)
cp config.status config.run
$(SHELL) config.run
rm -f config.run
all.internal: start.encap rest.encap
# This is what to compile if making a cross-compiler.
# Note that we can compile enquire using the cross-compiler just built,
# although we can't run it on this machine.
all.cross: native gcc-cross specs stmp-headers $(LIBGCC) $(STMP_FIXPROTO) \
$(LIBGCC1_TEST) $(EXTRA_PARTS) lang.all.cross
# This is what to compile if making gcc with a cross-compiler.
all.build: native xgcc $(EXTRA_PARTS) lang.all.build
# This is what must be made before installing GCC and converting libraries.
start.encap: native xgcc specs $(LIBGCC1) xlimits.h lang.start.encap
# These can't be made until after GCC can run.
rest.encap: stmp-headers $(LIBGCC) $(STMP_FIXPROTO) $(EXTRA_PARTS) lang.rest.encap
# This is what is made with the host's compiler
# whether making a cross compiler or not.
native: config.status cpp $(LANGUAGES) $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2)
# Define the names for selecting languages in LANGUAGES.
C c: cc1
OBJC objc: cc1obj objc-runtime
OBJECTIVE-C objective-c: cc1obj objc-runtime
PROTO: proto
# Tell GNU make these are phony targets.
.PHONY: C c OBJC objc OBJECTIVE-C objective-c PROTO proto
# Really, really stupid make features, such as SUN's KEEP_STATE, may force
# a target to build even if it is up-to-date. So we must verify that
# config.status does not exist before failing.
config.status:
@if [ ! -f config.status ] ; then \
echo You must configure gcc. Look at the INSTALL file for details.; \
false; \
else \
true; \
fi
# On the target machine, finish building a cross compiler.
# This does the things that can't be done on the host machine.
rest.cross: $(LIBGCC) gfloat.h specs
# Verify that it works to compile and link libgcc1-test.
# If it does, then there are sufficient replacements for libgcc1.a.
libgcc1-test: libgcc1-test.o native $(GCC_PARTS)
@echo "Testing libgcc1. Ignore linker warning messages."
$(GCC_FOR_TARGET) $(GCC_CFLAGS) libgcc1-test.o -o libgcc1-test \
-nostartfiles -nostdlib `$(GCC_FOR_TARGET) --print-libgcc-file-name`
libgcc1-test.o: libgcc1-test.c native xgcc
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -c $(srcdir)/libgcc1-test.c
# Recompile all the language-independent object files.
# This is used only if the user explicitly asks for it.
compilations: ${OBJS}
# Create a list of the language-independent object files so the language
# subdirectories needn't mention their names explicitly.
stamp-objlist: Makefile $(OBJS) $(BC_OBJS)
echo " $(OBJS) $(BC_OBJS)" | sed -e 's, \([a-z]\), ../\1,g' -e 's/\.o/$(objext)/g' >stamp-objlist
# We call this executable `xgcc' rather than `gcc'
# to avoid confusion if the current directory is in the path
# and CC is `gcc'. It is renamed to `gcc' when it is installed.
xgcc: gcc.o version.o $(LIBDEPS) $(EXTRA_GCC_OBJS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ gcc.o version.o $(EXTRA_GCC_OBJS) $(LIBS)
# Dump a specs file to make -B./ read these specs over installed ones.
specs: xgcc
$(GCC_FOR_TARGET) -dumpspecs > tmp-specs
mv tmp-specs specs
# We do want to create an executable named `xgcc', so we can use it to
# compile libgcc2.a.
# Also create gcc-cross, so that install-common will install properly.
gcc-cross: xgcc
cp xgcc$(exeext) gcc-cross$(exeext)
cc1: $(P) $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(C_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)
cc1obj: $(P) $(OBJC_OBJS) $(OBJS) $(BC_OBJS) $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ $(OBJC_OBJS) $(OBJS) $(BC_OBJS) $(LIBS)
# Copy float.h from its source.
gfloat.h: $(FLOAT_H)
-rm -f gfloat.h
cp $(FLOAT_H) gfloat.h
# Create float.h source for the native machine.
float.h-nat: enquire
-./enquire -f > tmp-float.h
mv tmp-float.h float.h-nat
# Create a dummy float.h source for a cross-compiler.
float.h-cross:
echo "#error float.h values not known for cross-compiler" > t-float.h-cross
mv t-float.h-cross float.h-cross
# Used to compile enquire with standard cc, but have forgotten why.
# Let's try with GCC.
enquire: enquire.o $(GCC_PARTS)
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ENQUIRE_LDFLAGS) enquire.o -o $@
enquire.o: $(srcdir)/enquire.c $(GCC_PASSES) stmp-int-hdrs
# Breaking this line caused a problem with one version of GNU make.
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(ENQUIRE_CFLAGS) -I. -c $(srcdir)/enquire.c
# Build the version of limits.h that we will install.
xlimits.h: glimits.h limitx.h limity.h
if $(LIMITS_H_TEST) ; then \
cat $(srcdir)/limitx.h $(srcdir)/glimits.h $(srcdir)/limity.h > tmp-xlimits.h; \
else \
cat $(srcdir)/glimits.h > tmp-xlimits.h; \
fi
mv tmp-xlimits.h xlimits.h
# Build libgcc.a.
# This is done in two parts because some functions, in libgcc1.c,
# must be compiled with something other than GCC,
# while the rest, in libgcc2.c, must be compiled with xgcc.
# That means we can't do libgcc2.c until after xgcc, cc1, etc.
# Use this as value of LIBGCC1 to cause conversion to GNU library format.
# LIBCONVERT should put its output in libgcc1.conv.
libgcc1.conv: libgcc1.a
$(LIBCONVERT) libgcc1.a libgcc1.conv
# Use this as value of LIBGCC1 to inhibit use of libgcc1.c entirely.
# Make an empty file instead.
libgcc1.null: $(GCC_PASSES)
echo "__foo () {}" > dummy.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) -c dummy.c
ld -r -x dummy$(objext); mv a.out dummy$(objext)
$(OLDAR) $(OLDAR_FLAGS) libgcc1.null dummy$(objext)
rm -f dummy$(objext) dummy.c
# This is $(LIBGCC1) for a cross-compiler.
# We have no automatic way of building libgcc1.a,
# so it's up to the installer to find a way to do that.
# This rule deliberately does not depend on libgcc1.a
# so that it will fail if the installer hasn't provided it.
libgcc1.cross:
mv libgcc1.a libgcc1.cross || (echo You must find a way to make libgcc1.a; false)
# Compile the library of arithmetic subroutines with the native compiler.
# Don't compile it with GCC!
# (That would cause most arithmetic functions to call themselves.)
libgcc1.a: libgcc1.c $(CONFIG_H) $(LIB1FUNCS_EXTRA) config.status
-rm -f tmplibgcc1.a
# Actually build it in tmplibgcc1.a, then rename at end,
# so that libgcc1.a itself remains nonexistent if compilation is aborted.
# -e causes any failing command to make this rule fail.
# -e doesn't work in certain shells, so we test $$? as well.
# lynx has a broken ar, it always complains when the initial library is
# empty, thus this command works only if we don't do -e
# There is a trailing backslash (\) deleted from the following line.
# set -e;
for name in $(LIB1FUNCS); \
do \
echo $${name}; \
rm -f $${name}$(objext); \
$(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c -DL$${name} $(srcdir)/libgcc1.c; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
mv libgcc1$(objext) $${name}$(objext); \
ld -r -x $${name}$(objext); mv a.out $${name}$(objext); \
$(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
rm -f $${name}$(objext); \
done
# Some shells crash when a loop has no items.
# So make sure there is always at least one--`..'.
# Then ignore it.
# We don't use -e here because there are if statements
# that should not make the command give up when the if condition is false.
# Instead, we test for failure after each command where it matters.
for file in .. $(LIB1FUNCS_EXTRA); \
do \
if [ x$${file} != x.. ]; then \
name=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
echo $${name}; \
if [ $${name}.asm = $${file} ]; then \
cp $${file} $${name}.s || exit 1; file=$${name}.s; \
else true; fi; \
$(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -c $${file}; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
ld -r -x $${name}$(objext); mv a.out $${name}$(objext); \
$(OLDAR) $(OLDAR_FLAGS) tmplibgcc1.a $${name}$(objext); \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
rm -f $${name}.s $${name}$(objext); \
else true; \
fi; \
done
-if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc1.a; else true; fi
mv tmplibgcc1.a libgcc1.a
# Build libgcc1.a from assembler source. LIB1ASMFUNCS is the list of
# functions. LIB1ASMSRC is the name of the source file in the config
# subdirectory.
libgcc1-asm.a: libgcc2.ready config.status $(srcdir)/config/$(LIB1ASMSRC)
-rm -f tmplibgcc1.a libgcc1.S
cp $(srcdir)/config/$(LIB1ASMSRC) libgcc1.S
# Actually build it in tmplibgcc1.a, then rename at end,
# so that libgcc1-asm.a itself remains nonexistent if compilation is aborted.
# -e causes any failing command to make this rule fail.
# -e doesn't work in certain shells, so we test $$? as well.
# lynx has a broken ar, it always complains when the initial library is
# empty, thus this command works only if we don't do -e
# There is a trailing backslash (\) deleted from the following line.
# set -e;
for name in $(LIB1ASMFUNCS); \
do \
echo $${name}; \
$(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} libgcc1.S; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
mv libgcc1$(objext) $${name}$(objext); \
ld -r -x $${name}$(objext); mv a.out $${name}$(objext); \
$(AR) $(AR_FLAGS) tmplibgcc1.a $${name}$(objext); \
rm -f $${name}$(objext); \
done
-rm -f libgcc1.S
mv tmplibgcc1.a libgcc1-asm.a
# Generate assembly versions of the functions required for libgcc1.
# You'll still need to massage the code by hand (possibly hacking
# underscores and local labels) but this will get you started.
libgcc1.S: libgcc1.c $(CONFIG_H) config.status
-rm -f libgcc1.S
touch libgcc1.S
for name in $(LIB1FUNCS); \
do \
echo $${name}; \
$(OLDCC) $(CCLIBFLAGS) $(INCLUDES) -S -DL$${name} $(srcdir)/libgcc1.c; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
echo '#ifdef ' L$${name} >> libgcc1.S; \
cat libgcc1.s >> libgcc1.S; \
echo '#endif /*' L$${name} '*/' >> libgcc1.S; \
echo "" >> libgcc1.S; \
done
# Compiling libgcc2.a requires making sure that cc1, etc. have been compiled.
# But recompiling cc1 should not force recompilation of libgcc2.a.
# If you want to force recompilation, delete libgcc2.a.
libgcc2.ready: $(GCC_PASSES) $(LIBGCC2_DEPS) stmp-int-hdrs
-if [ -f libgcc2.ready ] ; then \
true; \
else \
touch libgcc2.ready; \
fi
libgcc2.a: libgcc2.c libgcc2.ready $(CONFIG_H) $(LIB2FUNCS_EXTRA) \
machmode.h longlong.h gbl-ctors.h config.status
# Actually build it in tmplibgcc2.a, then rename at end,
# so that libgcc2.a itself remains nonexistent if compilation is aborted.
-rm -f tmplibgcc2.a
# -e causes any failing command to make this rule fail.
# -e doesn't work in certain shells, so we test $$? as well.
# lynx has a broken ar, it always complains when the initial library is
# empty, thus this command works only if we don't do -e
# There is a trailing backslash (\) deleted from the following line.
# set -e;
for name in $(LIB2FUNCS); \
do \
echo $${name}; \
$(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c -DL$${name} \
$(srcdir)/libgcc2.c -o $${name}$(objext); \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
ld -r -x $${name}$(objext); mv a.out $${name}$(objext); \
$(AR) $(AR_FLAGS) tmplibgcc2.a $${name}$(objext); \
rm -f $${name}$(objext); \
done
# Some shells crash when a loop has no items.
# So make sure there is always at least one--`..'.
# Then ignore it.
# We don't use -e here because there are if statements
# that should not make the command give up when the if condition is false.
# Instead, we test for failure after each command where it matters.
for file in .. $(LIB2FUNCS_EXTRA); \
do \
if [ x$${file} != x.. ]; then \
name=`echo $${file} | sed -e 's/[.][cS]$$//' -e 's/[.]asm$$//'`; \
oname=` echo $${name} | sed -e 's,.*/,,'`; \
echo $${name}; \
if [ $${name}.asm = $${file} ]; then \
cp $${file} $${name}.s || exit 1; file=$${name}.s; \
else true; fi; \
$(GCC_FOR_TARGET) $(LIBGCC2_CFLAGS) $(INCLUDES) -c $${file}; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
ld -r -x $${oname}$(objext); mv a.out $${oname}$(objext); \
$(AR) $(AR_FLAGS) tmplibgcc2.a $${oname}$(objext); \
rm -f $${name}.s $${oname}$(objext); \
else true; \
fi; \
done
mv tmplibgcc2.a libgcc2.a
# These lines were deleted from above the mv command
# because ranlibing libgcc.a itself should suffice.
# -if [ x${HPUX_GAS} = x ] ; then \
# if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc2.a; else true; fi; \
# else true; fi
# Combine the various libraries into a single library, libgcc.a.
libgcc.a: $(LIBGCC1) $(LIBGCC2)
-rm -rf tmplibgcc.a libgcc.a tmpcopy
mkdir tmpcopy
-if [ x$(LIBGCC1) != x ]; \
then (cd tmpcopy; $(AR) x ../$(LIBGCC1)); \
else true; \
fi
# Some versions of ar (specifically the one in RISC/os 5.x), create an
# unwritable table of contents file, and then print an error message when
# the second ar command tries to overwrite this file. To avoid the error
# message from ar, we make sure all files are writable.
-(cd tmpcopy; chmod +w * > /dev/null 2>&1)
(cd tmpcopy; $(AR) x ../$(LIBGCC2))
(cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *$(objext))
rm -rf tmpcopy
-if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi
# Actually build it in tmplibgcc.a, then rename at end,
# so that libgcc.a itself remains nonexistent if compilation is aborted.
mv tmplibgcc.a libgcc.a
# Use the genmultilib shell script to generate the information the gcc
# driver program needs to select the library directory based on the
# switches.
multilib.h: $(srcdir)/genmultilib Makefile
$(SHELL) $(srcdir)/genmultilib "$(MULTILIB_OPTIONS)" \
"$(MULTILIB_DIRNAMES)" "$(MULTILIB_MATCHES)" > multilib.h
# Build multiple copies of libgcc.a, one for each target switch.
stmp-multilib: $(LIBGCC1) libgcc2.c libgcc2.ready $(CONFIG_H) \
$(LIB2FUNCS_EXTRA) machmode.h longlong.h gbl-ctors.h config.status
for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
RANLIB="$(RANLIB)" RANLIB_TEST="$(RANLIB_TEST)" \
HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS) $${flags}" \
LIBGCC1="$(LIBGCC1)" LIBGCC2="$(LIBGCC2)" \
dir="$${dir}" stmp-multilib-sub; \
if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
done
touch stmp-multilib
# Subroutine of stmp-multilib so make -n works.
stmp-multilib-sub:
rm -f $(dir)/libgcc.a $(LIBGCC2)
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC2)
if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
then true; \
else rm -f $(LIBGCC1); \
fi
if [ x$(LIBGCC1) != xlibgcc1-asm.a ]; \
then true; \
else \
$(MAKE) GCC_FOR_TARGET="$(GCC_FOR_TARGET)" \
AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" CC="$(CC)" CFLAGS="$(CFLAGS)" \
HOST_PREFIX="$(HOST_PREFIX)" HOST_PREFIX_1="$(HOST_PREFIX_1)" \
LIBGCC2_CFLAGS="$(LIBGCC2_CFLAGS)" $(LIBGCC1); \
fi
rm -rf tmplibgcc.a tmpcopy
mkdir tmpcopy
if [ x$(LIBGCC1) != x ]; \
then (cd tmpcopy; $(AR) x ../$(LIBGCC1)); \
else true; \
fi
(cd tmpcopy; $(AR) x ../$(LIBGCC2))
(cd tmpcopy; $(AR) $(AR_FLAGS) ../tmplibgcc.a *$(objext))
rm -rf libgcc2.a tmpcopy
if $(RANLIB_TEST) ; then $(RANLIB) tmplibgcc.a; else true; fi
if [ -d $(dir) ]; then true; else mkdir $(dir); fi
mv tmplibgcc.a $(dir)/libgcc.a
objc-runtime: libobjc.a
# Build the Objective C runtime library.
libobjc.a: cc1obj stmp-int-hdrs libgcc2.ready $(USE_COLLECT2) $(EXTRA_PARTS)
if [ -d objc ]; then true; else mkdir objc; fi
thisdir1=`pwd`; \
srcdir1=`cd $(srcdir); pwd`; \
cd objc; \
$(MAKE) -f $${srcdir1}/objc/Makefile libobjc.a \
srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \
GCC_CFLAGS="$(GCC_CFLAGS)"
-rm -f libobjc.a
ln objc/libobjc.a . >/dev/null 2>&1 || cp objc/libobjc.a .
-if $(RANLIB_TEST) ; then $(RANLIB) libobjc.a; else true; fi
# This is used by objc/Makefile if the user runs that directly.
sublibobjc.a: cc1obj stmp-int-hdrs libgcc2.ready
thisdir1=`pwd`; \
srcdir1=`cd $(srcdir); pwd`; \
cd objc; \
$(MAKE) -f $$srcdir1/objc/Makefile libobjc.a \
srcdir=$$srcdir1 tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
GCC_FOR_TARGET="$$thisdir1/xgcc -B$$thisdir1/" \
GCC_CFLAGS="$(GCC_CFLAGS)"
# Compile two additional files that are linked with every program
# linked using GCC on systems using COFF or ELF, for the sake of C++
# constructors.
crtbegin.o: stamp-crt ; @true
crtend.o: stamp-crt; @true
stamp-crt: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
-DCRT_BEGIN -finhibit-size-directive -fno-inline-functions \
-g0 -c $(srcdir)/crtstuff.c
mv crtstuff$(objext) crtbegin$(objext)
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
-DCRT_END -finhibit-size-directive -fno-inline-functions \
-g0 -c $(srcdir)/crtstuff.c
mv crtstuff$(objext) crtend$(objext)
touch stamp-crt
# On some systems we also want to install versions of these files
# compiled using PIC for use in shared libraries.
crtbeginS.o crtendS.o: stamp-crtS ; @true
stamp-crtS: crtstuff.c $(GCC_PASSES) $(CONFIG_H) gbl-ctors.h
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
-DCRT_BEGIN -finhibit-size-directive -fno-inline-functions \
-g0 -c $(srcdir)/crtstuff.c -fPIC
mv crtstuff$(objext) crtbeginS$(objext)
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(INCLUDES) $(CRTSTUFF_T_CFLAGS) \
-DCRT_END -finhibit-size-directive -fno-inline-functions \
-g0 -c $(srcdir)/crtstuff.c -fPIC
mv crtstuff$(objext) crtendS$(objext)
touch stamp-crtS
# Compiling object files from source files.
# Note that dependencies on obstack.h are not written
# because that file is not part of GCC.
# C language specific files.
c-parse.o : $(srcdir)/c-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \
$(srcdir)/c-parse.h c-tree.h input.h flags.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/c-parse.c
$(srcdir)/c-parse.h: $(srcdir)/c-parse.c
$(srcdir)/c-parse.c: $(srcdir)/c-parse.y
cd $(srcdir); $(BISON) $(BISONFLAGS) -d c-parse.y -o c-parse.c
$(srcdir)/c-parse.y: c-parse.in
sed -e "/^ifobjc$$/,/^end ifobjc$$/d" \
-e "/^ifc$$/d" -e "/^end ifc$$/d" \
$(srcdir)/c-parse.in >tmp-c-parse.y
$(srcdir)/move-if-change tmp-c-parse.y $(srcdir)/c-parse.y
$(srcdir)/c-gperf.h: c-parse.gperf
gperf -p -j1 -i 1 -g -o -t -G -N is_reserved_word -k1,3,$$ \
$(srcdir)/c-parse.gperf >tmp-gperf.h
$(srcdir)/move-if-change tmp-gperf.h $(srcdir)/c-gperf.h
c-decl.o : c-decl.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h output.h
c-typeck.o : c-typeck.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h output.h
c-lang.o : c-lang.c $(CONFIG_H) $(TREE_H)
c-lex.o : c-lex.c $(CONFIG_H) $(TREE_H) c-lex.h c-tree.h $(srcdir)/c-parse.h \
input.h flags.h $(srcdir)/c-gperf.h c-pragma.h
c-aux-info.o : c-aux-info.c $(CONFIG_H) $(TREE_H) c-tree.h flags.h
c-convert.o : c-convert.c $(CONFIG_H) $(TREE_H) flags.h
c-pragma.o: c-pragma.c $(CONFIG_H) $(TREE_H) c-pragma.h
c-iterate.o: c-iterate.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h flags.h
# To make a configuration always use collect2, set USE_COLLECT2 to ld.
ld: collect2
rm -f ld$(exeext)
ln collect2$(exeext) ld$(exeext) > /dev/null 2>&1 \
|| cp collect2$(exeext) ld$(exeext)
collect2 : collect2.o cplus-dem.o underscore.o version.o $(LIBDEPS)
# Don't try modifying collect2 (aka ld) in place--it might be linking this.
-rm -f collect2$(exeext)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ collect2.o \
cplus-dem.o underscore.o version.o $(LIBS)
collect2.o : collect2.c $(CONFIG_H) gstab.h obstack.h demangle.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DTARGET_MACHINE=\"$(target)\" $(MAYBE_USE_COLLECT2) \
-c `echo $(srcdir)/collect2.c | sed 's,^\./,,'`
cplus-dem.o: cplus-dem.c demangle.h
underscore.c: stamp-under ; @true
stamp-under: $(GCC_PASSES)
echo "int xxy_us_dummy;" >tmp-dum.c
$(GCC_FOR_TARGET) -S tmp-dum.c
echo '/*WARNING: This file is automatically generated!*/' >tmp-under.c
if grep _xxy_us_dummy tmp-dum.s > /dev/null ; then \
echo "int prepends_underscore = 1;" >>tmp-under.c; \
else \
echo "int prepends_underscore = 0;" >>tmp-under.c; \
fi
$(srcdir)/move-if-change tmp-under.c underscore.c
-rm -f tmp-dum.c tmp-dum.s
touch stamp-under
# Objective C language specific files.
objc-parse.o : $(srcdir)/objc-parse.c $(CONFIG_H) $(TREE_H) c-lex.h \
c-tree.h input.h flags.h objc-act.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/objc-parse.c
$(srcdir)/objc-parse.c : $(srcdir)/objc-parse.y
cd $(srcdir); $(BISON) $(BISONFLAGS) objc-parse.y -o objc-parse.c
$(srcdir)/objc-parse.y: $(srcdir)/c-parse.in
sed -e "/^ifc$$/,/^end ifc$$/d" \
-e "/^ifobjc$$/d" -e "/^end ifobjc$$/d" \
$(srcdir)/c-parse.in >tmp-objc-prs.y
$(srcdir)/move-if-change tmp-objc-prs.y $(srcdir)/objc-parse.y
objc-act.o : objc-act.c $(CONFIG_H) $(TREE_H) $(RTL_H) c-tree.h c-lex.h \
flags.h objc-act.h input.h function.h $(srcdir)/c-parse.h
# A file used by all variants of C.
c-common.o : c-common.c $(CONFIG_H) $(TREE_H) c-tree.h c-lex.h flags.h
# Language-independent files.
gcc.o: gcc.c $(CONFIG_H) multilib.h config.status $(lang_specs_files)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DSTANDARD_STARTFILE_PREFIX=\"$(libdir)/\" \
-DSTANDARD_EXEC_PREFIX=\"$(libdir)/gcc-lib/\" \
-DDEFAULT_TARGET_VERSION=\"$(version)\" \
-DDEFAULT_TARGET_MACHINE=\"$(target)\" \
-DTOOLDIR_BASE_PREFIX=\"$(exec_prefix)/\" \
$(MAYBE_TARGET_DEFAULT) \
-c `echo $(srcdir)/gcc.c | sed 's,^\./,,'`
dumpvers: dumpvers.c
version.o: version.c
obstack.o: obstack.c
convert.o: convert.c $(CONFIG_H) $(TREE_H) flags.h convert.h
tree.o : tree.c $(CONFIG_H) $(TREE_H) flags.h function.h
print-tree.o : print-tree.c $(CONFIG_H) $(TREE_H)
stor-layout.o : stor-layout.c $(CONFIG_H) $(TREE_H) flags.h function.h
fold-const.o : fold-const.c $(CONFIG_H) $(TREE_H) flags.h
toplev.o : toplev.c $(CONFIG_H) $(TREE_H) $(RTL_H) bytecode.h bc-emit.h \
flags.h input.h insn-attr.h xcoffout.h defaults.h output.h \
$(lang_options_files)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
$(MAYBE_TARGET_DEFAULT) $(MAYBE_USE_COLLECT2) \
-c `echo $(srcdir)/toplev.c | sed 's,^\./,,'`
rtl.o : rtl.c $(CONFIG_H) $(RTL_H)
print-rtl.o : print-rtl.c $(CONFIG_H) $(RTL_H)
rtlanal.o : rtlanal.c $(CONFIG_H) $(RTL_H)
varasm.o : varasm.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h function.h \
defaults.h insn-codes.h expr.h hard-reg-set.h regs.h xcoffout.h \
output.h bytecode.h c-pragma.h
function.o : function.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
insn-flags.h insn-codes.h expr.h regs.h hard-reg-set.h insn-config.h \
recog.h output.h bytecode.h
stmt.o : stmt.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h \
insn-flags.h insn-config.h insn-codes.h hard-reg-set.h expr.h loop.h \
recog.h bytecode.h bc-typecd.h bc-typecd.def bc-opcode.h bc-optab.h \
bc-emit.h
expr.o : expr.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h function.h regs.h \
insn-flags.h insn-codes.h expr.h insn-config.h recog.h output.h \
typeclass.h bytecode.h bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h \
bc-emit.h modemap.def
calls.o : calls.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h expr.h insn-codes.h \
insn-flags.h
expmed.o : expmed.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
insn-flags.h insn-config.h insn-codes.h expr.h recog.h real.h
explow.o : explow.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h hard-reg-set.h \
insn-config.h expr.h recog.h insn-flags.h insn-codes.h
optabs.o : optabs.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
insn-flags.h insn-config.h insn-codes.h expr.h recog.h reload.h
dbxout.o : dbxout.c $(CONFIG_H) $(TREE_H) $(RTL_H) flags.h regs.h \
insn-config.h reload.h gstab.h xcoffout.h defaults.h output.h
sdbout.o : sdbout.c $(CONFIG_H) $(TREE_H) $(RTL_H) gsyms.h flags.h \
insn-config.h reload.h
dwarfout.o : dwarfout.c $(CONFIG_H) $(TREE_H) $(RTL_H) dwarf.h flags.h \
insn-config.h reload.h output.h defaults.h
xcoffout.o : xcoffout.c $(CONFIG_H) $(TREE_H) $(RTL_H) xcoffout.h flags.h
emit-rtl.o : emit-rtl.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h \
function.h regs.h insn-config.h insn-codes.h real.h expr.h bytecode.h \
bc-opcode.h bc-typecd.h bc-typecd.def bc-optab.h bc-emit.h bc-opname.h
real.o : real.c $(CONFIG_H) $(TREE_H)
getpwd.o : getpwd.c $(CONFIG_H)
integrate.o : integrate.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h integrate.h \
insn-flags.h insn-config.h insn-codes.h expr.h real.h function.h \
bytecode.h
jump.o : jump.c $(CONFIG_H) $(RTL_H) flags.h hard-reg-set.h regs.h \
insn-config.h insn-flags.h insn-codes.h expr.h real.h
stupid.o : stupid.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h
cse.o : cse.c $(CONFIG_H) $(RTL_H) regs.h hard-reg-set.h flags.h real.h \
insn-config.h recog.h
loop.o : loop.c $(CONFIG_H) $(RTL_H) flags.h loop.h insn-config.h \
insn-flags.h insn-codes.h regs.h hard-reg-set.h recog.h expr.h real.h
unroll.o : unroll.c $(CONFIG_H) $(RTL_H) insn-config.h insn-codes.h \
integrate.h regs.h flags.h expr.h loop.h
flow.o : flow.c $(CONFIG_H) $(RTL_H) flags.h insn-config.h \
basic-block.h regs.h hard-reg-set.h output.h
combine.o : combine.c $(CONFIG_H) $(RTL_H) flags.h \
insn-config.h insn-flags.h insn-codes.h insn-attr.h regs.h expr.h \
basic-block.h recog.h real.h hard-reg-set.h
regclass.o : regclass.c $(CONFIG_H) $(RTL_H) hard-reg-set.h flags.h \
basic-block.h regs.h insn-config.h recog.h reload.h real.h bytecode.h
local-alloc.o : local-alloc.c $(CONFIG_H) $(RTL_H) flags.h basic-block.h \
regs.h hard-reg-set.h insn-config.h recog.h output.h
global.o : global.c $(CONFIG_H) $(RTL_H) flags.h \
basic-block.h regs.h hard-reg-set.h insn-config.h output.h
reload.o : reload.c $(CONFIG_H) $(RTL_H) flags.h output.h \
reload.h recog.h hard-reg-set.h insn-config.h insn-codes.h regs.h real.h
reload1.o : reload1.c $(CONFIG_H) $(RTL_H) real.h flags.h expr.h \
reload.h regs.h hard-reg-set.h insn-config.h insn-flags.h insn-codes.h \
basic-block.h recog.h output.h
caller-save.o : caller-save.c $(CONFIG_H) $(RTL_H) flags.h \
regs.h hard-reg-set.h insn-codes.h insn-config.h basic-block.h recog.h \
reload.h expr.h
reorg.o : reorg.c $(CONFIG_H) $(RTL_H) conditions.h hard-reg-set.h \
basic-block.h regs.h insn-config.h insn-attr.h insn-flags.h recog.h \
flags.h output.h
sched.o : sched.c $(CONFIG_H) $(RTL_H) basic-block.h regs.h hard-reg-set.h \
flags.h insn-config.h insn-attr.h
final.o : final.c $(CONFIG_H) $(RTL_H) $(TREE_H) flags.h regs.h \
recog.h conditions.h insn-config.h insn-attr.h real.h output.h \
hard-reg-set.h insn-flags.h insn-codes.h gstab.h xcoffout.h defaults.h
recog.o : recog.c $(CONFIG_H) $(RTL_H) \
regs.h recog.h hard-reg-set.h flags.h insn-config.h insn-attr.h \
insn-flags.h insn-codes.h real.h
reg-stack.o : reg-stack.c $(CONFIG_H) $(RTL_H) $(TREE_H) \
regs.h hard-reg-set.h flags.h insn-config.h
$(out_object_file): $(out_file) $(CONFIG_H) $(TREE_H) \
$(RTL_H) regs.h hard-reg-set.h real.h insn-config.h conditions.h \
insn-flags.h output.h insn-attr.h insn-codes.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(out_file)
# Build auxiliary files that support ecoff format.
mips-tfile: mips-tfile.o version.o $(LIBDEPS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tfile.o version.o $(LIBS)
mips-tfile.o : mips-tfile.c $(CONFIG_H) $(RTL_H)
mips-tdump: mips-tdump.o version.o $(LIBDEPS)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ mips-tdump.o version.o $(LIBS)
mips-tdump.o : mips-tdump.c $(CONFIG_H) $(RTL_H)
# Build file to support OSF/rose half-pic format.
halfpic.o: halfpic.c $(CONFIG_H) $(RTL_H) $(TREE_H)
# Normally this target is not used; but it is used if you
# define ALLOCA=alloca.o. In that case, you must get a suitable alloca.c
# from the GNU Emacs distribution.
alloca.o: alloca.c
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(ALLOCA_FLAGS) \
-c `echo $(srcdir)/alloca.c | sed 's,^\./,,'`
$(ALLOCA_FINISH)
# Generate header and source files from the machine description,
# and compile them.
.PRECIOUS: insn-config.h insn-flags.h insn-codes.h \
insn-emit.c insn-recog.c insn-extract.c insn-output.c insn-peep.c \
insn-attr.h insn-attrtab.c
# The following pair of rules has this effect:
# genconfig is run only if the md has changed since genconfig was last run;
# but the file insn-config.h is touched only when its contents actually change.
# Each of the other insn-* files is handled by a similar pair of rules.
# This causes an anomaly in the results of make -n
# because insn-* is older than stamp-*
# and thus make -n thinks that insn-* will be updated
# and force recompilation of things that depend on it.
# We use move-if-change precisely to avoid such recompilation.
# But there is no way to teach make -n that it will be avoided.
# Each of the insn-*.[ch] rules has a semicolon at the end,
# for otherwise the system Make on SunOS 4.1 never tries
# to recompile insn-*.o. To avoid problems and extra noise from
# versions of make which don't like empty commands (nothing after the
# trailing `;'), we call true for each.
insn-config.h: stamp-config ; @true
stamp-config : $(md_file) genconfig $(srcdir)/move-if-change
./genconfig $(md_file) > tmp-config.h
$(srcdir)/move-if-change tmp-config.h insn-config.h
touch stamp-config
insn-flags.h: stamp-flags ; @true
stamp-flags : $(md_file) genflags $(srcdir)/move-if-change
./genflags $(md_file) > tmp-flags.h
$(srcdir)/move-if-change tmp-flags.h insn-flags.h
touch stamp-flags
insn-codes.h: stamp-codes ; @true
stamp-codes : $(md_file) gencodes $(srcdir)/move-if-change
./gencodes $(md_file) > tmp-codes.h
$(srcdir)/move-if-change tmp-codes.h insn-codes.h
touch stamp-codes
insn-emit.o : insn-emit.c $(CONFIG_H) $(RTL_H) expr.h real.h output.h \
insn-config.h insn-flags.h insn-codes.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-emit.c
insn-emit.c: stamp-emit ; @true
stamp-emit : $(md_file) genemit $(srcdir)/move-if-change
./genemit $(md_file) > tmp-emit.c
$(srcdir)/move-if-change tmp-emit.c insn-emit.c
touch stamp-emit
insn-recog.o : insn-recog.c $(CONFIG_H) $(RTL_H) insn-config.h recog.h \
real.h output.h flags.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-recog.c
insn-recog.c: stamp-recog ; @true
stamp-recog : $(md_file) genrecog $(srcdir)/move-if-change
./genrecog $(md_file) > tmp-recog.c
$(srcdir)/move-if-change tmp-recog.c insn-recog.c
touch stamp-recog
insn-opinit.o : insn-opinit.c $(CONFIG_H) $(RTL_H) insn-codes.h insn-flags.h \
insn-config.h flags.h rtl.h recog.h expr.h reload.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-opinit.c
insn-opinit.c: stamp-opinit ; @true
stamp-opinit : $(md_file) genopinit $(srcdir)/move-if-change
./genopinit $(md_file) > tmp-opinit.c
$(srcdir)/move-if-change tmp-opinit.c insn-opinit.c
touch stamp-opinit
insn-extract.o : insn-extract.c $(CONFIG_H) $(RTL_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-extract.c
insn-extract.c: stamp-extract ; @true
stamp-extract : $(md_file) genextract $(srcdir)/move-if-change
./genextract $(md_file) > tmp-extract.c
$(srcdir)/move-if-change tmp-extract.c insn-extract.c
touch stamp-extract
insn-peep.o : insn-peep.c $(CONFIG_H) $(RTL_H) regs.h output.h real.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-peep.c
insn-peep.c: stamp-peep ; @true
stamp-peep : $(md_file) genpeep $(srcdir)/move-if-change
./genpeep $(md_file) > tmp-peep.c
$(srcdir)/move-if-change tmp-peep.c insn-peep.c
touch stamp-peep
insn-attrtab.o : insn-attrtab.c $(CONFIG_H) $(RTL_H) regs.h real.h output.h \
insn-attr.h insn-config.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-attrtab.c
insn-attr.h: stamp-attr ; @true
stamp-attr : $(md_file) genattr $(srcdir)/move-if-change
./genattr $(md_file) > tmp-attr.h
$(srcdir)/move-if-change tmp-attr.h insn-attr.h
touch stamp-attr
insn-attrtab.c: stamp-attrtab ; @true
stamp-attrtab : $(md_file) genattrtab $(srcdir)/move-if-change
if cmp -s $(PREMADE_ATTRTAB_MD) $(md_file); \
then \
echo Using $(PREMADE_ATTRTAB); \
cp $(PREMADE_ATTRTAB) tmp-attrtab.c; \
else \
./genattrtab $(md_file) > tmp-attrtab.c; \
fi
$(srcdir)/move-if-change tmp-attrtab.c insn-attrtab.c
touch stamp-attrtab
insn-output.o : insn-output.c $(CONFIG_H) $(RTL_H) regs.h real.h conditions.h \
hard-reg-set.h insn-config.h insn-flags.h insn-attr.h output.h recog.h \
insn-codes.h
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c insn-output.c
insn-output.c: stamp-output ; @true
stamp-output : $(md_file) genoutput $(srcdir)/move-if-change
./genoutput $(md_file) > tmp-output.c
$(srcdir)/move-if-change tmp-output.c insn-output.c
touch stamp-output
# Compile the programs that generate insn-* from the machine description.
# They are compiled with $(HOST_CC), and associated libraries,
# since they need to run on this machine
# even if GCC is being compiled to run on some other machine.
# $(CONFIG_H) is omitted from the deps of the gen*.o
# because these programs don't really depend on anything
# about the target machine. They do depend on config.h itself,
# since that describes the host machine.
# Pass the md file through cpp if the target requests it.
$(MD_FILE): $(MD_DEPS)
rm -f $@
$(MD_CPP) $(MD_CPPFLAGS) $(md_file) | sed 's/^# /; /g' > tmp-$@
mv tmp-$@ $@
genconfig : genconfig.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genconfig.o $(HOST_RTL) $(HOST_LIBS)
genconfig.o : genconfig.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genconfig.c
genflags : genflags.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genflags.o $(HOST_RTL) $(HOST_LIBS)
genflags.o : genflags.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genflags.c
gencodes : gencodes.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gencodes.o $(HOST_RTL) $(HOST_LIBS)
gencodes.o : gencodes.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gencodes.c
genemit : genemit.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genemit.o $(HOST_RTL) $(HOST_LIBS)
genemit.o : genemit.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genemit.c
genopinit : genopinit.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genopinit.o $(HOST_RTL) $(HOST_LIBS)
genopinit.o : genopinit.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genopinit.c
genrecog : genrecog.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genrecog.o $(HOST_RTL) $(HOST_LIBS)
genrecog.o : genrecog.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genrecog.c
genextract : genextract.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genextract.o $(HOST_RTL) $(HOST_LIBS)
genextract.o : genextract.c $(RTL_H) $(build_xm_file) insn-config.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genextract.c
genpeep : genpeep.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genpeep.o $(HOST_RTL) $(HOST_LIBS)
genpeep.o : genpeep.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genpeep.c
genattr : genattr.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattr.o $(HOST_RTL) $(HOST_LIBS)
genattr.o : genattr.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattr.c
genattrtab : genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genattrtab.o $(HOST_RTL) $(HOST_PRINT) $(HOST_RTLANAL) $(HOST_LIBS)
genattrtab.o : genattrtab.c $(RTL_H) $(build_xm_file) insn-config.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genattrtab.c
genoutput : genoutput.o $(HOST_RTL) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
genoutput.o $(HOST_RTL) $(HOST_LIBS)
genoutput.o : genoutput.c $(RTL_H) $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/genoutput.c
# Compile the libraries to be used by gen*.
# If we are not cross-building, gen* use the same .o's that cc1 will use,
# and HOST_PREFIX_1 is `foobar', just to ensure these rules don't conflict
# with the rules for rtl.o, alloca.o, etc.
$(HOST_PREFIX_1)rtl.o: $(srcdir)/rtl.c $(CONFIG_H) $(RTL_H)
rm -f $(HOST_PREFIX)rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtl.c > $(HOST_PREFIX)rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtl.c
$(HOST_PREFIX_1)print-rtl.o: $(srcdir)/print-rtl.c $(CONFIG_H) $(RTL_H)
rm -f $(HOST_PREFIX)print-rtl.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/print-rtl.c > $(HOST_PREFIX)print-rtl.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)print-rtl.c
$(HOST_PREFIX_1)rtlanal.o: $(srcdir)/rtlanal.c $(CONFIG_H) $(RTL_H)
rm -f $(HOST_PREFIX)rtlanal.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/rtlanal.c > $(HOST_PREFIX)rtlanal.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)rtlanal.c
$(HOST_PREFIX_1)alloca.o: alloca.c
rm -f $(HOST_PREFIX)alloca.c
cp $(srcdir)/alloca.c $(HOST_PREFIX)alloca.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)alloca.c
$(HOST_PREFIX_1)obstack.o: obstack.c
rm -f $(HOST_PREFIX)obstack.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/obstack.c > $(HOST_PREFIX)obstack.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)obstack.c
$(HOST_PREFIX_1)malloc.o: malloc.c
rm -f $(HOST_PREFIX)malloc.c
sed -e 's/config[.]h/hconfig.h/' $(srcdir)/malloc.c > $(HOST_PREFIX)malloc.c
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(HOST_PREFIX)malloc.c
# This satisfies the dependency that we get if you cross-compile a compiler
# that does not need to compile alloca, malloc or whatever.
$(HOST_PREFIX_1):
touch $(HOST_PREFIX_1)
# Remake bytecode files.
BI_OBJ=bi-parser.o bi-lexer.o bi-reverse.o
bc-emit.o : bc-emit.c $(CONFIG_H) $(RTL_H) real.h $(BYTECODE_H) \
bc-arity.h bc-opcode.h bc-typecd.h bc-typecd.def bi-run.h bytetypes.h
bc-optab.o : bc-optab.c $(CONFIG_H) $(REAL_H) $(BYTECODE_H) \
bc-opcode.h bc-typecd.h bc-typecd.def
bi-arity: bi-arity.o $(BI_OBJ) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
bi-arity.o $(BI_OBJ) $(HOST_LIBS)
bi-opcode: bi-opcode.o $(BI_OBJ) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
bi-opcode.o $(BI_OBJ) $(HOST_LIBS)
bi-opname: bi-opname.o $(BI_OBJ) $(HOST_LIBDEPS)
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
bi-opname.o $(BI_OBJ) $(HOST_LIBS)
$(srcdir)/bi-parser.h: $(srcdir)/bi-parser.c
$(srcdir)/bi-parser.c: $(srcdir)/bi-parser.y
cd $(srcdir); $(BISON) $(BISONFLAGS) -d bi-parser.y -o bi-parser.c
bi-parser.o: $(srcdir)/bi-parser.c bi-defs.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-parser.c
bi-lexer.o: bi-lexer.c $(srcdir)/bi-parser.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-lexer.c
bi-arity.o: bi-arity.c bi-defs.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-arity.c
bi-opcode.o: bi-opcode.c bi-defs.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-opcode.c
bi-opname.o: bi-opname.c bi-defs.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-opname.c
bi-reverse.o: bi-reverse.c bi-defs.h
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) \
$(srcdir)/bi-reverse.c
bc-arity.h: stamp-bcarity ; @true
stamp-bcarity : $(srcdir)/bytecode.def bi-arity $(srcdir)/move-if-change
./bi-arity < $(srcdir)/bytecode.def >tmp-bc-arity.h
$(srcdir)/move-if-change tmp-bc-arity.h bc-arity.h
touch stamp-bcarity
bc-opcode.h: stamp-bcopcode ; @true
stamp-bcopcode : $(srcdir)/bytecode.def bi-opcode $(srcdir)/move-if-change
./bi-opcode < $(srcdir)/bytecode.def >tmp-bcopcd.h
$(srcdir)/move-if-change tmp-bcopcd.h bc-opcode.h
touch stamp-bcopcode
bc-opname.h: stamp-bcopname ; @true
stamp-bcopname : $(srcdir)/bytecode.def bi-opname $(srcdir)/move-if-change
./bi-opname < $(srcdir)/bytecode.def >tmp-bcopnm.h
$(srcdir)/move-if-change tmp-bcopnm.h bc-opname.h
touch stamp-bcopname
bytecode.mostlyclean:
-rm -f bc-arity.h bc-opcode.h bc-opname.h
bytecode.distclean bytecode.clean: bytecode.mostlyclean
-rm -f bi-arity bi-opcode bi-opname bi-lexer
bytecode.maintainer-clean: bytecode.clean
-rm -f bi-parser.c bi-parser.h
# Remake cpp and protoize.
# Making the preprocessor
cpp: $(CCCP)
-rm -f cpp$(exeext)
ln $(CCCP)$(exeext) cpp$(exeext) > /dev/null 2>&1 \
|| cp $(CCCP)$(exeext) cpp$(exeext)
cccp: cccp.o cexp.o version.o $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cccp.o cexp.o \
version.o $(LIBS)
cexp.o: $(srcdir)/cexp.c $(CONFIG_H)
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) -c $(srcdir)/cexp.c
$(srcdir)/cexp.c: $(srcdir)/cexp.y
cd $(srcdir); $(BISON) -o cexp.c cexp.y
cccp.o: cccp.c $(CONFIG_H) pcp.h version.c config.status
# The reason we use $(libdir)/g++-include rather than using libsubdir
# is for compatibility with the current version of libg++.
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
-c `echo $(srcdir)/cccp.c | sed 's,^\./,,'`
cppmain: cppmain.o cpplib.o cpphash.o cppalloc.o cpperror.o cppexp.o \
version.o $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ cppmain.o cpplib.o cpphash.o \
cppalloc.o cpperror.o cppexp.o version.o $(LIBS)
cpplib.o: cpplib.c $(CONFIG_H) cpplib.h cpphash.h config.status
$(CC) $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
-c `echo $(srcdir)/cpplib.c | sed 's,^\./,,'`
cpperror.o: cpperror.c $(CONFIG_H) cpplib.h
cppexp.o: cppexp.c $(CONFIG_H) cpplib.h
cpphash.o: cpphash.c cpplib.h cpphash.h
cppalloc.o: cppalloc.c $(CONFIG_H)
# Note for the stamp targets, we run the program `true' instead of
# having an empty command (nothing following the semicolon).
proto: config.status protoize unprotoize SYSCALLS.c.X
protoize: protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
protoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS)
protoize.o: stamp-proto ; @true
unprotoize: unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBDEPS)
$(CC) $(ALL_CFLAGS) $(LDFLAGS) -o $@ \
unprotoize.o getopt.o getopt1.o getpwd.o version.o $(LIBS)
unprotoize.o: stamp-proto ; @true
stamp-proto: protoize.c getopt.h $(CONFIG_H)
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
-DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DSTD_PROTO_DIR=\"$(libsubdir)\" \
-DUNPROTOIZE $(srcdir)/protoize.c
mv protoize$(objext) unprotoize$(objext)
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=\"$(libsubdir)/include\" \
-DGPLUSPLUS_INCLUDE_DIR=\"$(gxx_include_dir)\" \
-DCROSS_INCLUDE_DIR=\"$(libsubdir)/sys-include\" \
-DTOOL_INCLUDE_DIR=\"$(tooldir)/include\" \
-DLOCAL_INCLUDE_DIR=\"$(includedir)\" \
-DSTD_PROTO_DIR=\"$(libsubdir)\" \
$(srcdir)/protoize.c
touch stamp-proto
getopt.o: getopt.c getopt.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt.c
getopt1.o: getopt1.c getopt.h
$(CC) -c $(ALL_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) $(srcdir)/getopt1.c
# This info describes the target machine, so compile with GCC just built.
SYSCALLS.c.X: $(srcdir)/sys-types.h $(srcdir)/sys-protos.h $(GCC_PASSES) \
stmp-int-hdrs
-rm -f SYSCALLS.c tmp-SYSCALLS.s
cat $(srcdir)/sys-types.h $(srcdir)/sys-protos.h > SYSCALLS.c
$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \
-aux-info $@ -S -o tmp-SYSCALLS.s SYSCALLS.c
-rm -f SYSCALLS.c tmp-SYSCALLS.s
test-protoize-simple: ./protoize ./unprotoize $(GCC_PASSES)
-rm -f tmp-proto.[cso]
cp $(srcdir)/protoize.c tmp-proto.c
chmod u+w tmp-proto.c
./protoize -N -B ./ -x getopt.h -c "-B./ -Wall -Wwrite-strings \
$(CFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=0 \
-DGPLUSPLUS_INCLUDE_DIR=0 \
-DCROSS_INCLUDE_DIR=0 \
-DTOOL_INCLUDE_DIR=0 \
-DSTD_PROTO_DIR=0" tmp-proto.c
@echo '**********' Expect 400 lines of differences.
-diff $(srcdir)/protoize.c tmp-proto.c > tmp-proto.diff
-wc -l tmp-proto.diff
./unprotoize -N -x getopt.h -c "-B./ -Wall -Wwrite-strings \
$(CFLAGS) $(INCLUDES) \
-DGCC_INCLUDE_DIR=0 \
-DGPLUSPLUS_INCLUDE_DIR=0 \
-DCROSS_INCLUDE_DIR=0 \
-DTOOL_INCLUDE_DIR=0 \
-DSTD_PROTO_DIR=0" tmp-proto.c
@echo Expect zero differences.
diff $(srcdir)/protoize.c tmp-proto.c | cat
-rm -f tmp-proto.[cs] tmp-proto$(objext)
# Build the include directory. The stamp files are stmp-* rather than
# stamp-* so that mostlyclean does not force the include directory to
# be rebuilt.
# Build the include directory except for float.h (which depends upon
# enquire).
stmp-int-hdrs: stmp-fixinc $(USER_H) xlimits.h objc-headers
# Copy in the headers provided with gcc.
# The sed command gets just the last file name component;
# this is necessary because VPATH could add a dirname.
# Using basename would be simpler, but some systems don't have it.
objdir=`pwd`; \
cd $(srcdir); \
for file in .. $(USER_H); do \
if [ X$$file != X.. ]; then \
realfile=`echo $$file | sed -e 's|.*/\([^/]*\)$$|\1|'`; \
rm -f $$objdir/include/$$realfile; \
cp ginclude/$$realfile $$objdir/include; \
chmod a+r $$objdir/include/$$realfile; \
fi; \
done
rm -f include/limits.h
cp xlimits.h include/limits.h
chmod a+r include/limits.h
# Install the README
rm -f include/README
cp $(srcdir)/README-fixinc include/README
chmod a+r include/README
touch stmp-int-hdrs
# Build the complete include directory.
stmp-headers: stmp-int-hdrs gfloat.h
rm -f include/float.h
cp gfloat.h include/float.h
chmod a+r include/float.h
touch stmp-headers
# Build fixed copies of system files.
stmp-fixinc: $(FIXINCLUDES) gsyslimits.h
rm -rf include
mkdir include
if [ x$(FIXINCLUDES) != xMakefile.in ]; \
then \
for dir in $(SYSTEM_HEADER_DIR) $(OTHER_FIXINCLUDES_DIRS); do \
if [ -d $$dir ]; \
then \
$(SHELL) $(srcdir)/$(FIXINCLUDES) include $$dir; \
else true; fi; \
done; \
else true; \
fi
rm -f include/syslimits.h
if [ -f include/limits.h ]; then \
mv include/limits.h include/syslimits.h; \
else \
cp $(srcdir)/gsyslimits.h include/syslimits.h; \
fi
chmod a+r include/syslimits.h
touch stmp-fixinc
# copy objc header files into build directory
objc-headers: stmp-fixinc
if [ -d include ]; then true; else mkdir include; fi
if [ -d objc ]; then true; else mkdir objc; fi
thisdir1=`pwd`; \
srcdir1=`cd $(srcdir); pwd`; \
cd objc; \
$(MAKE) -f $${srcdir1}/objc/Makefile copy-headers \
srcdir=$${srcdir1} tooldir=$(tooldir) AR="$(AR)" AR_FLAGS="$(AR_FLAGS)" \
GCC_FOR_TARGET="$${thisdir1}/xgcc -B$${thisdir1}/" \
GCC_CFLAGS="$(GCC_CFLAGS)" incinstalldir=$${thisdir1}/include
touch objc-headers
# Files related to the fixproto script.
deduced.h: $(GCC_PASSES) $(srcdir)/scan-types.sh stmp-int-hdrs
CC="$(GCC_FOR_TARGET) $(GCC_CFLAGS) $(ALL_CPPFLAGS) -I. -I$(srcdir) -Iinclude -I${SYSTEM_HEADER_DIR}"; \
export CC; \
$(SHELL) $(srcdir)/scan-types.sh "$(srcdir)" >tmp-deduced.h
mv tmp-deduced.h deduced.h
gen-protos: gen-protos.o scan.o cppalloc.o $(HOST_LIBDEPS)
${HOST_CC} $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ \
gen-protos.o scan.o cppalloc.o $(HOST_LIBS)
gen-protos.o: gen-protos.c scan.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/gen-protos.c
scan.o: scan.c scan.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan.c
xsys-protos.h: $(GCC_PASSES) $(srcdir)/sys-protos.h deduced.h gen-protos Makefile
cat deduced.h $(srcdir)/sys-protos.h > tmp-fixtmp.c
mv tmp-fixtmp.c fixtmp.c
$(GCC_FOR_TARGET) fixtmp.c -w -U__SIZE_TYPE__ -U__PTRDIFF_TYPE__ -U__WCHAR_TYPE__ -E \
| sed -e 's/ / /g' -e 's/ *(/ (/g' -e 's/ [ ]*/ /g' -e 's/( )/()/' \
| ./gen-protos >xsys-protos.hT
mv xsys-protos.hT xsys-protos.h
rm -rf fixtmp.c
fix-header: fix-header.o scan-decls.o scan.o xsys-protos.h $(HOST_LIBDEPS) \
cpplib.o cpphash.o cppalloc.o cppexp.o cpperror.o version.o
$(HOST_CC) $(HOST_CFLAGS) $(HOST_LDFLAGS) -o $@ fix-header.o \
scan-decls.o scan.o cpplib.o cpphash.o cppalloc.o version.o \
cppexp.o $(HOST_LIBS)
fix-header.o: fix-header.c obstack.h scan.h xsys-protos.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/fix-header.c
scan-decls.o: scan-decls.c scan.h cpplib.h $(build_xm_file)
$(HOST_CC) -c $(HOST_CFLAGS) $(HOST_CPPFLAGS) $(INCLUDES) $(srcdir)/scan-decls.c
# stmp-fixproto depends on this, not on fix-header directly.
# The idea is to make sure fix-header gets built,
# but not rerun fixproto after each stage
# just because fix-header's mtime has changed.
fixhdr.ready: fix-header
-if [ -f fixhdr.ready ] ; then \
true; \
else \
touch fixhdr.ready; \
fi
# stmp-headers is to make sure fixincludes has already finished.
# The if statement is so that we don't run fixproto a second time
# if it has already been run on the files in `include'.
stmp-fixproto: fixhdr.ready fixproto stmp-headers
@echo "Various warnings and error messages from fixproto are normal"
-if [ -d include ] ; then true; else mkdir include; fi
-if [ -f include/fixed ] ; then true; \
else \
: This line works around a 'make' bug in BSDI 1.1.; \
FIXPROTO_DEFINES="$(FIXPROTO_DEFINES)"; export FIXPROTO_DEFINES; \
$(SHELL) ${srcdir}/fixproto include include $(SYSTEM_HEADER_DIR); \
touch include/fixed; \
fi
touch stmp-fixproto
# Remake the info files.
doc: info
info: $(srcdir)/cpp.info $(srcdir)/gcc.info lang.info
$(srcdir)/cpp.info: cpp.texi
cd $(srcdir); $(MAKEINFO) cpp.texi
$(srcdir)/gcc.info: gcc.texi extend.texi install.texi invoke.texi \
md.texi rtl.texi tm.texi
cd $(srcdir); $(MAKEINFO) gcc.texi
dvi: $(srcdir)/gcc.dvi $(srcdir)/cpp.dvi lang.dvi
# This works with GNU Make's default rule.
$(srcdir)/gcc.dvi: gcc.texi extend.texi install.texi invoke.texi \
md.texi rtl.texi tm.texi
$(TEXI2DVI) $<
# This works with GNU Make's default rule.
$(srcdir)/cpp.dvi: cpp.texi
$(TEXI2DVI) $<
$(srcdir)/INSTALL: install1.texi install.texi
$(MAKEINFO) -D INSTALLONLY --no-header --no-split \
`echo $(srcdir)/install1.texi | sed 's,^\./,,'`
# Deletion of files made during compilation.
# There are four levels of this:
# `mostlyclean', `clean', `distclean' and `maintainer-clean'.
# `mostlyclean' is useful while working on a particular type of machine.
# It deletes most, but not all, of the files made by compilation.
# It does not delete libgcc.a or its parts, so it won't have to be recompiled.
# `clean' deletes everything made by running `make all'.
# `distclean' also deletes the files made by config.
# `maintainer-clean' also deletes everything that could be regenerated
# automatically. We remove as much from the language subdirectories as we can
# (less duplicated code).
mostlyclean: bytecode.mostlyclean lang.mostlyclean
-rm -f $(STAGESTUFF)
# Clean the objc subdir if we created one.
if [ -d objc ]; then \
srcdir1=`cd $(srcdir); pwd`; \
cd objc; $(MAKE) -f $$srcdir1/objc/Makefile mostlyclean; \
else true; fi
-rm -f libobjc.a
# Delete the temporary source copies for cross compilation.
-rm -f $(HOST_PREFIX_1)rtl.c $(HOST_PREFIX_1)rtlanal.c
-rm -f $(HOST_PREFIX_1)alloca.c $(HOST_PREFIX_1)malloc.c
-rm -f $(HOST_PREFIX_1)obstack.c
# Delete the temp files made in the course of building libgcc.a.
-rm -f tmplibgcc* tmpcopy xlimits.h
for name in $(LIB1FUNCS); do rm -f $${name}.c; done
# Delete other temporary files.
-rm -f tmp-float.h tmp-gcc.xtar.gz
-rm -f tmp-foo1 tmp-foo2 tmp-proto.* tmp-unproto.1 tmp-SYSCALLS.s
-rm -f tmp-c-parse.y tmp-objc-prs.y tmp-gperf.h
-rm -f tmp-specs t-float.h-cross tmp-xlimits.h
-rm -f tmp-fixtmp.c xsys-protos.hT
# Delete the stamp files.
-rm -f stamp-* tmp-*
-rm -f */stamp-* */tmp-*
# Delete debugging dump files.
-rm -f *.greg *.lreg *.combine *.flow *.cse *.jump *.rtl *.tree *.loop
-rm -f *.dbr *.jump2 *.sched *.cse2 *.sched2 *.stack
-rm -f */*.greg */*.lreg */*.combine */*.flow */*.cse */*.jump */*.rtl
-rm -f */*.tree */*.loop */*.dbr */*.jump2 */*.sched */*.cse2
-rm -f */*.sched2 */*.stack
# Delete some files made during installation.
-rm -f specs gfloat.h float.h-* enquire SYSCALLS.c.X SYSCALLS.c
-rm -f collect collect2 mips-tfile mips-tdump alloca.s
# Delete files generated for fixproto
-rm -rf fix-header xsys-protos.h deduced.h tmp-deduced.h \
gen-protos fixproto.list fixtmp.* fixhdr.ready
# Delete unwanted output files from TeX.
-rm -f *.toc *.log *.vr *.fn *.cp *.tp *.ky *.pg
-rm -f */*.toc */*.log */*.vr */*.fn */*.cp */*.tp */*.ky */*.pg
# Delete sorted indices we don't actually use.
-rm -f gcc.vrs gcc.kys gcc.tps gcc.pgs gcc.fns
# Delete core dumps.
-rm -f core */core
# Delete all files made by compilation
# that don't exist in the distribution.
clean: mostlyclean bytecode.clean lang.clean
# It may not be quite desirable to delete unprotoize.c here,
# but the spec for `make clean' requires it.
# Using unprotoize.c is not quite right in the first place,
# but what better way is there?
-rm -f libgcc.a libgcc1.a libgcc1-asm.a libgcc2.a libgcc2.ready
-rm -f libgcc1.null
-rm -f *.dvi
-rm -f */*.dvi
-if [ -f md.pre-cpp ]; then \
rm -f md ; \
fi
# Delete the include directory.
-rm -rf stmp-* include objc-headers
-rm -f */stmp-*
# Delete files used by the "multilib" facility (including libgcc subdirs).
-rm -f multilib.h tmpmultilib*
-if [ "x$(MULTILIB_DIRNAMES)" != x ] ; then \
rm -rf $(MULTILIB_DIRNAMES); \
else if [ "x$(MULTILIB_OPTIONS)" != x ] ; then \
rm -rf `echo $(MULTILIB_OPTIONS) | sed -e 's/\// /g'`; \
fi ; fi
# Delete all files that users would normally create
# while building and installing GCC.
distclean: clean bytecode.distclean lang.distclean
-rm -f tm.h config.h tconfig.h hconfig.h md
-rm -f config.status config.run
-rm -f Makefile specs.h options.h *.oaux
-rm -fr stage1 stage2 stage3 stage4
-rm -f */stage1 */stage2 */stage3 */stage4 */include
-rm -f objc-parse.output
-rm -f c-parse.output
-rm -f *.asm
# Delete anything likely to be found in the source directory
# that shouldn't be in the distribution.
extraclean: distclean lang.extraclean
-rm -rf =* ./"#"* *~* config/=* config/"#"* config/*~*
-rm -f patch* *.orig *.rej config/patch* config/*.orig config/*.rej
-rm -f config/*/=* config/*/"#"* config/*/*~*
-rm -f config/*/*.orig config/*/*.rej
-rm -f *.dvi *.ps *.oaux *.d *.[zZ] *.gz
-rm -f *.tar *.xtar *diff *.diff.* *.tar.* *.xtar.* *diffs
-rm -f *lose config/*lose config/*/*lose
-rm -f *.s *.s[0-9] *.i install1.texi config/ChangeLog
-rm -f */=* */"#"* */*~*
-rm -f */patch* */*.orig */*.rej
-rm -f */*.dvi */*.oaux */*.d */*.[zZ] */*.gz
-rm -f */*.tar */*.xtar */*diff */*.diff.* */*.tar.* */*.xtar.* */*diffs
-rm -f */*lose */*.s */*.s[0-9] */*.i
# Get rid of every file that's generated from some other file.
# Most of these files ARE PRESENT in the GCC distribution.
maintainer-clean: distclean bytecode.maintainer-clean lang.maintainer-clean
-rm -f c-parse.y c-gperf.h objc-parse.y
-rm -f objc-parse.c objc-parse.output
-rm -f c-parse.c c-parse.h c-parse.output
-rm -f cexp.c cexp.output TAGS
-rm -f cpp.info* cpp.??s cpp.*aux
-rm -f gcc.info* gcc.??s gcc.*aux
# Entry points `install' and `uninstall'.
# Also use `install-collect2' to install collect2 when the config files don't.
# The semicolon is to prevent the install.sh -> install default rule
# from doing anything. Having it run true helps avoid problems and
# noise from versions of make which don't like to have null commands.
install: $(INSTALL_TARGET) ; @true
# Copy the compiler files into directories where they will be run.
# Install the driver last so that the window when things are
# broken is small.
install-normal: install-common $(INSTALL_HEADERS) $(INSTALL_LIBGCC) \
install-libobjc install-man install-info lang.install-normal install-driver
# Do nothing while making gcc with a cross-compiler. The person who
# makes gcc for the target machine has to know how to put a complete
# gcc together by hand.
install-build: force
@echo You have to install gcc on your target machine by hand.
# Run this on the target machine
# to finish installation of cross compiler.
install-cross-rest: install-float-h-cross
# Install float.h for cross compiler.
# Run this on the target machine!
install-float-h-cross: install-dir
# if [ -f enquire ] ; then true; else false; fi
# Note: don't use -. We should fail right away if enquire was not made.
./enquire -f > $(tmpdir)/float.h
-rm -f $(libsubdir)/include/float.h
$(INSTALL_DATA) $(tmpdir)/float.h $(libsubdir)/include/float.h
-rm -f $(tmpdir)/float.h
chmod a-x $(libsubdir)/include/float.h
# Create the installation directory.
install-dir:
-if [ -d $(libdir) ] ; then true ; else mkdir $(libdir) ; chmod a+rx $(libdir) ; fi
-if [ -d $(libdir)/gcc-lib ] ; then true ; else mkdir $(libdir)/gcc-lib ; chmod a+rx $(libdir)/gcc-lib ; fi
# This dir isn't currently searched by cpp.
# -if [ -d $(libdir)/gcc-lib/include ] ; then true ; else mkdir $(libdir)/gcc-lib/include ; chmod a+rx $(libdir)/gcc-lib/include ; fi
-if [ -d $(libdir)/gcc-lib/$(target) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target) ; chmod a+rx $(libdir)/gcc-lib/$(target) ; fi
-if [ -d $(libdir)/gcc-lib/$(target)/$(version) ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version) ; chmod a+rx $(libdir)/gcc-lib/$(target)/$(version) ; fi
-if [ -d $(libdir)/gcc-lib/$(target)/$(version)/include ] ; then true ; else mkdir $(libdir)/gcc-lib/$(target)/$(version)/include ; chmod a+rx $(libdir)/gcc-lib/$(target)/$(version)/include ; fi
-if [ -d $(bindir) ] ; then true ; else mkdir $(bindir) ; chmod a+rx $(bindir) ; fi
-if [ -d $(includedir) ] ; then true ; else mkdir $(includedir) ; chmod a+rx $(includedir) ; fi
-if [ -d $(tooldir) ] ; then true ; else mkdir $(tooldir) ; chmod a+rx $(tooldir) ; fi
-if [ -d $(assertdir) ] ; then true ; else mkdir $(assertdir) ; chmod a+rx $(assertdir) ; fi
-if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; chmod a+rx $(infodir) ; fi
# We don't use mkdir -p to create the parents of mandir,
# because some systems don't support it.
# Instead, we use this technique to create the immediate parent of mandir.
-parent=`echo $(mandir)|sed -e 's@/[^/]*$$@@'`; \
if [ -d $$parent ] ; then true ; else mkdir $$parent ; chmod a+rx $$parent ; fi
-if [ -d $(mandir) ] ; then true ; else mkdir $(mandir) ; chmod a+rx $(mandir) ; fi
# Install the compiler executables built during cross compilation.
install-common: native install-dir $(EXTRA_PARTS) lang.install-common
for file in $(COMPILERS); do \
if [ -f $$file ] ; then \
rm -f $(libsubdir)/$$file; \
$(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
else true; \
fi; \
done
for file in $(EXTRA_PASSES) $(EXTRA_PROGRAMS) $(USE_COLLECT2) ..; do \
if [ x"$$file" != x.. ]; then \
rm -f $(libsubdir)/$$file; \
$(INSTALL_PROGRAM) $$file $(libsubdir)/$$file; \
else true; fi; \
done
for file in $(EXTRA_PARTS) ..; do \
if [ x"$$file" != x.. ]; then \
rm -f $(libsubdir)/$$file; \
$(INSTALL_DATA) $$file $(libsubdir)/$$file; \
else true; fi; \
done
# Don't mess with specs if it doesn't exist yet.
-if [ -f specs ] ; then \
rm -f $(libsubdir)/specs; \
$(INSTALL_DATA) specs $(libsubdir)/specs; \
fi
# Install protoize if it was compiled.
-if [ -f protoize$(exeext) ]; \
then \
rm -f $(bindir)/protoize$(exeext); \
$(INSTALL_PROGRAM) protoize$(exeext) $(bindir)/protoize$(exeext); \
rm -f $(bindir)/unprotoize$(exeext); \
$(INSTALL_PROGRAM) unprotoize$(exeext) $(bindir)/unprotoize$(exeext); \
rm -f $(libsubdir)/SYSCALLS.c.X; \
$(INSTALL_DATA) SYSCALLS.c.X $(libsubdir)/SYSCALLS.c.X; \
chmod a-x $(libsubdir)/SYSCALLS.c.X; \
fi
-rm -f $(libsubdir)/cpp$(exeext)
$(INSTALL_PROGRAM) cpp$(exeext) $(libsubdir)/cpp$(exeext)
# Install the driver program as $(target)-gcc
# and also as either gcc (if native) or $(tooldir)/bin/gcc.
install-driver: xgcc
-if [ -f gcc-cross$(exeext) ] ; then \
rm -f $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
$(INSTALL_PROGRAM) gcc-cross$(exeext) $(bindir)/$(GCC_CROSS_NAME)$(exeext); \
if [ -d $(tooldir)/bin/. ] ; then \
rm -f $(tooldir)/bin/gcc$(exeext); \
$(INSTALL_PROGRAM) gcc-cross$(exeext) $(tooldir)/bin/gcc$(exeext); \
else true; fi; \
else \
rm -f $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
$(INSTALL_PROGRAM) xgcc$(exeext) $(bindir)/$(GCC_INSTALL_NAME)$(exeext); \
rm -f $(bindir)/$(target)-gcc-1$(exeext); \
ln $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target)-gcc-1$(exeext) \
> /dev/null 2>&1 \
|| cp $(bindir)/$(GCC_INSTALL_NAME)$(exeext) $(bindir)/$(target)-gcc-1$(exeext); \
mv $(bindir)/$(target)-gcc-1$(exeext) $(bindir)/$(target)-gcc$(exeext); \
fi
# Install the info files.
install-info: doc install-dir lang.install-info
-rm -f $(infodir)/cpp.info* $(infodir)/gcc.info*
cd $(srcdir); for f in cpp.info* gcc.info*; \
do $(INSTALL_DATA) $$f $(infodir)/$$f; done
-chmod a-x $(infodir)/cpp.info* $(infodir)/gcc.info*
# Install the man pages.
install-man: install-dir $(srcdir)/gcc.1 $(srcdir)/cccp.1 lang.install-man
-if [ -f gcc-cross ] ; then \
rm -f $(mandir)/$(GCC_CROSS_NAME)$(manext); \
$(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/$(GCC_CROSS_NAME)$(manext); \
chmod a-x $(mandir)/$(GCC_CROSS_NAME)$(manext); \
else \
rm -f $(mandir)/$(GCC_INSTALL_NAME)$(manext); \
$(INSTALL_DATA) $(srcdir)/gcc.1 $(mandir)/$(GCC_INSTALL_NAME)$(manext); \
chmod a-x $(mandir)/$(GCC_INSTALL_NAME)$(manext); \
fi
-rm -f $(mandir)/cccp$(manext)
-$(INSTALL_DATA) $(srcdir)/cccp.1 $(mandir)/cccp$(manext)
-chmod a-x $(mandir)/cccp$(manext)
# Install the library.
install-libgcc: libgcc.a install-dir
-if [ -f libgcc.a ] ; then \
rm -f $(libsubdir)/libgcc.a; \
$(INSTALL_DATA) libgcc.a $(libsubdir)/libgcc.a; \
if $(RANLIB_TEST) ; then \
(cd $(libsubdir); $(RANLIB) libgcc.a); else true; fi; \
chmod a-x $(libsubdir)/libgcc.a; \
else true; fi
# Install multiple versions of libgcc.a.
install-multilib: stmp-multilib install-dir
for i in `$(GCC_FOR_TARGET) --print-multi-lib`; do \
dir=`echo $$i | sed -e 's/;.*$$//'`; \
if [ -d $(libsubdir)/$${dir} ]; then true; else mkdir $(libsubdir)/$${dir}; fi; \
rm -f $(libsubdir)/$${dir}/libgcc.a; \
$(INSTALL_DATA) $${dir}/libgcc.a $(libsubdir)/$${dir}/libgcc.a; \
if $(RANLIB_TEST); then \
(cd $(libsubdir)/$${dir}; $(RANLIB) libgcc.a); else true; fi; \
chmod a-x $(libsubdir)/$${dir}/libgcc.a; \
done
# Install the objc run time library.
install-libobjc: install-dir
-if [ -f libobjc.a ] ; then \
rm -f $(libsubdir)/libobjc.a; \
$(INSTALL_DATA) libobjc.a $(libsubdir)/libobjc.a; \
if $(RANLIB_TEST) ; then \
(cd $(libsubdir); $(RANLIB) libobjc.a); else true; fi; \
chmod a-x $(libsubdir)/libobjc.a; \
else true; fi
# Install all the header files built in the include subdirectory.
install-headers: install-include-dir $(INSTALL_HEADERS_DIR) $(INSTALL_ASSERT_H)
# Fix symlinks to absolute paths in the installed include directory to
# point to the installed directory, not the build directory.
-files=`cd $(libsubdir)/include; find . -type l -print 2>/dev/null`; \
if [ $$? -eq 0 ]; then \
dir=`cd include; pwd`; \
for i in $$files; do \
dest=`ls -ld $(libsubdir)/include/$$i | sed -n 's/.*-> //p'`; \
if expr "$$dest" : "$$dir.*" > /dev/null; then \
rm -f $(libsubdir)/include/$$i; \
ln -s `echo $$i | sed "s|/[^/]*|/..|g" | sed 's|/..$$||'``echo "$$dest" | sed "s|$$dir||"` $(libsubdir)/include/$$i; \
fi; \
done; \
fi
# Create or recreate the gcc private include file directory.
install-include-dir: install-dir
-rm -rf $(libsubdir)/include
mkdir $(libsubdir)/include
-chmod a+rx $(libsubdir)/include
# Install the include directory using tar.
install-headers-tar: stmp-headers $(STMP_FIXPROTO) install-include-dir
(cd include; \
tar -cf - .; exit 0) | (cd $(libsubdir)/include; tar $(TAROUTOPTS) - )
# /bin/sh on some systems returns the status of the first tar,
# and that can lose with GNU tar which always writes a full block.
# So use `exit 0' to ignore its exit status.
# Install the include directory using cpio.
install-headers-cpio: stmp-headers $(STMP_FIXPROTO) install-include-dir
(cd include; find . -print) | (cd include; cpio -pdum $(libsubdir)/include)
# Put assert.h where it won't override GNU libc's assert.h.
# It goes in a dir that is searched after GNU libc's headers;
# thus, the following conditionals are no longer needed.
# But it's not worth deleting them now.
## Don't replace the assert.h already there if it is not from GCC.
## This code would be simpler if it tested for -f ... && ! grep ...
## but supposedly the ! operator is missing in sh on some systems.
install-assert-h: assert.h install-dir
if [ -f $(assertdir)/assert.h ]; \
then \
if grep "__eprintf" $(assertdir)/assert.h >/dev/null; \
then \
rm -f $(assertdir)/assert.h; \
$(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
chmod a-x $(assertdir)/assert.h; \
else true; \
fi; \
else \
rm -f $(assertdir)/assert.h; \
$(INSTALL_DATA) $(srcdir)/assert.h $(assertdir)/assert.h; \
chmod a-x $(assertdir)/assert.h; \
fi
# Use this target to install the program `collect2' under the name `ld'.
install-collect2: collect2 install-dir
$(INSTALL_PROGRAM) collect2$(exeext) $(libsubdir)/ld$(exeext)
# Install the driver program as $(libsubdir)/gcc for collect2.
$(INSTALL_PROGRAM) xgcc$(exeext) $(libsubdir)/gcc$(exeext)
# Cancel installation by deleting the installed files.
uninstall: lang.uninstall
-rm -rf $(libsubdir)
-rm -rf $(bindir)/$(GCC_INSTALL_NAME)$(exeext)
-rm -rf $(bindir)/$(GCC_CROSS_NAME)$(exeext)
-rm -rf $(bindir)/protoize$(exeext)
-rm -rf $(bindir)/unprotoize$(exeext)
-rm -rf $(mandir)/$(GCC_INSTALL_NAME)$(manext)
-rm -rf $(mandir)/$(GCC_CROSS_NAME)$(manext)
-rm -rf $(mandir)/cccp$(manext)
-rm -rf $(mandir)/protoize$(manext)
-rm -rf $(mandir)/unprotoize$(manext)
# These exist for maintenance purposes.
# Update the tags table.
TAGS: force
cd $(srcdir); \
mkdir temp; \
mv -f c-parse.[ch] objc-parse.c cexp.c =*.[chy] temp; \
etags *.y *.h *.c; \
mv temp/* .; \
rmdir temp
# Create the distribution tar file.
#dist: gcc-$(version).tar.gz
dist: gcc.xtar.gz
gcc.xtar.gz: gcc.xtar
gzip --best < gcc.xtar > tmp-gcc.xtar.gz
mv tmp-gcc.xtar.gz gcc.xtar.gz
#gcc-$(version).tar.gz: gcc-$(version).tar
# gzip < gcc-$(version).tar > gcc-$(version).tar.gz
#gcc-$(version).tar:
gcc.xtar: distdir
# Make the distribution.
tar -chf gcc.xtar gcc-$(version)
# This target exists to do the initial work before the language specific
# stuff gets done.
distdir-start: doc $(srcdir)/INSTALL $(srcdir)/c-parse.y $(srcdir)/c-gperf.h \
$(srcdir)/objc-parse.y $(srcdir)/c-parse.c $(srcdir)/objc-parse.c \
$(srcdir)/cexp.c
@if grep -s "for version ${mainversion}" gcc.texi > /dev/null; \
then true; \
else echo "You must update the version number in \`gcc.texi'"; sleep 10;\
fi
# Update the version number in README
awk '$$1 " " $$2 " " $$3 == "This directory contains" \
{ $$6 = version; print $$0 } \
$$1 " " $$2 " " $$3 != "This directory contains"' \
version=$(version) README > tmp.README
mv tmp.README README
-rm -rf gcc-$(version) tmp
# Put all the files in a temporary subdirectory
# which has the name that we want to have in the tar file.
mkdir tmp
mkdir tmp/config
mkdir tmp/ginclude
mkdir tmp/objc
for file in *[0-9a-zA-Z+]; do \
ln $$file tmp > /dev/null 2>&1 || cp $$file tmp; \
done
cd config; \
for file in *[0-9a-zA-Z+]; do \
if test -d $$file && test "$$file" != RCS; then \
mkdir ../tmp/config/$$file; \
cd $$file; \
for subfile in *[0-9a-zA-Z+]; do \
ln $$subfile ../../tmp/config/$$file >/dev/null 2>&1 \
|| cp $$subfile ../../tmp/config/$$file; \
done; \
cd ..; \
else \
ln $$file ../tmp/config >/dev/null 2>&1 \
|| cp $$file ../tmp/config; \
fi; \
done
cd ginclude; \
for file in *[0-9a-zA-Z+]; do \
ln $$file ../tmp/ginclude >/dev/null 2>&1 \
|| cp $$file ../tmp/ginclude; \
done
cd objc; \
for file in *[0-9a-zA-Z+]; do \
ln $$file ../tmp/objc >/dev/null 2>&1 || cp $$file ../tmp/objc; \
done
ln .gdbinit tmp
# Finish making `distdir', after the languages have done their thing.
distdir-finish:
mv tmp gcc-$(version)
# Get rid of everything we don't want in the distribution. We'd want
# this to use Makefile.in, but it doesn't have the `lang.foo' targets
# expanded.
cd gcc-$(version); make extraclean
distdir: distdir-start lang.distdir distdir-finish
# make diff oldversion=M.N
# creates a diff file between an older distribution and this one.
# The -P option assumes this is GNU diff.
diff:
diff -rc2P -x c-parse.y -x c-parse.c -x c-parse.h -x c-gperf.h \
-x cexp.c -x bi-parser.c -x objc-parse.y -x objc-parse.c \
-x TAGS \
-x "gcc.??" -x "gcc.??s" -x gcc.aux -x "gcc.info*" \
-x "cpp.??" -x "cpp.??s" -x cpp.aux -x "cpp.info*" \
$(LANG_DIFF_EXCLUDES) \
gcc-$(oldversion) gcc-$(version) > diffs
bootstrap: force
# Only build the C compiler for stage1, because that is the only one that
# we can guarantee will build with the native compiler, and also it is the
# only thing useful for building stage2.
$(MAKE) CC="$(CC)" libdir=$(libdir) LANGUAGES=c
$(MAKE) stage1
# This used to define ALLOCA as empty, but that would lead to bad results
# for a subsequent `make install' since that would not have ALLOCA empty.
# To prevent `make install' from compiling alloca.o and then relinking cc1
# because alloca.o is newer, we permit these recursive makes to compile
# alloca.o. Then cc1 is newer, so it won't have to be relinked.
$(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
$(MAKE) stage2
$(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
bootstrap2: force
$(MAKE) CC="stage1/xgcc -Bstage1/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage1/ LANGUAGES="$(LANGUAGES)"
$(MAKE) stage2
$(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
bootstrap3: force
$(MAKE) CC="stage2/xgcc -Bstage2/" CFLAGS="$(BOOT_CFLAGS)" LDFLAGS="$(BOOT_LDFLAGS)" libdir=$(libdir) STAGE_PREFIX=stage2/ LANGUAGES="$(LANGUAGES)"
# Compare the object files in the current directory with those in the
# stage2 directory.
# ./ avoids bug in some versions of tail.
compare: force
for file in *$(objext); do \
tail +16c ./$$file > tmp-foo1; \
tail +16c stage2/$$file > tmp-foo2 2>/dev/null \
&& (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
done
for dir in tmp-foo $(SUBDIRS); do \
if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
for file in $$dir/*$(objext); do \
tail +16c ./$$file > tmp-foo1; \
tail +16c stage2/$$file > tmp-foo2 2>/dev/null \
&& (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
done; \
fi; \
done
-rm -f tmp-foo*
# Similar, but compare with stage3 directory
compare3: force
for file in *$(objext); do \
tail +16c ./$$file > tmp-foo1; \
tail +16c stage3/$$file > tmp-foo2 2>/dev/null \
&& (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
done
for dir in tmp-foo $(SUBDIRS); do \
if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
for file in $$dir/*$(objext); do \
tail +16c ./$$file > tmp-foo1; \
tail +16c stage3/$$file > tmp-foo2 2>/dev/null \
&& (cmp tmp-foo1 tmp-foo2 || echo $$file differs) || true; \
done; \
fi; \
done
-rm -f tmp-foo*
# Compare the object files in the current directory with those in the
# stage2 directory. Use gnu cmp (diffutils v2.4 or later) to avoid
# running tail and the overhead of twice copying each object file.
gnucompare: force
for file in *$(objext); do \
cmp --ignore-initial=16 $$file stage2/$$file || true ; \
done
for dir in tmp-foo $(SUBDIRS); do \
if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
for file in $$dir/*$(objext); do \
cmp --ignore-initial=16 $$file stage2/$$file || true ; \
done; \
fi; \
done
# Similar, but compare with stage3 directory
gnucompare3: force
for file in *$(objext); do \
cmp --ignore-initial=16 $$file stage3/$$file || true ; \
done
for dir in tmp-foo $(SUBDIRS); do \
if [ "`echo $$dir/*$(objext)`" != "$$dir/*$(objext)" ] ; then \
for file in $$dir/*$(objext); do \
cmp --ignore-initial=16 $$file stage3/$$file || true ; \
done; \
fi; \
done
# Copy the object files from a particular stage into a subdirectory.
stage1-start:
-if [ -d stage1 ] ; then true ; else mkdir stage1 ; fi
-for dir in . $(SUBDIRS) ; \
do \
if [ -d stage1/$$dir ] ; then true ; else mkdir stage1/$$dir ; fi ; \
done
-mv $(STAGESTUFF) stage1
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
-if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage1 || cp as$(exeext) stage1 ; else true ; fi
-if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage1 || cp ld$(exeext) stage1 ; else true ; fi
-if [ -f collect-ld$(exeext) ] ; then ln -s ../collect-ld$(exeext) stage1 || cp collect-ld$(exeext) stage1 ; else true ; fi
-rm -f stage1/libgcc.a
-cp libgcc.a stage1
-if $(RANLIB_TEST) ; then $(RANLIB) stage1/libgcc.a; else true; fi
stage1: force stage1-start lang.stage1
stage2-start:
-if [ -d stage2 ] ; then true ; else mkdir stage2 ; fi
-for dir in . $(SUBDIRS) ; \
do \
if [ -d stage2/$$dir ] ; then true ; else mkdir stage2/$$dir ; fi ; \
done
-mv $(STAGESTUFF) stage2
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
-if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage2 || cp as$(exeext) stage2 ; else true ; fi
-if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage2 || cp ld$(exeext) stage2 ; else true ; fi
-if [ -f collect-ld ] ; then ln -s ../collect-ld$(exeext) stage2 || cp collect-ld$(exeext) stage2 ; else true ; fi
-rm -f stage2/libgcc.a
-cp libgcc.a stage2
-if $(RANLIB_TEST) ; then $(RANLIB) stage2/libgcc.a; else true; fi
stage2: force stage2-start lang.stage2
stage3-start:
-if [ -d stage3 ] ; then true ; else mkdir stage3 ; fi
-for dir in . $(SUBDIRS) ; \
do \
if [ -d stage3/$$dir ] ; then true ; else mkdir stage3/$$dir ; fi ; \
done
-mv $(STAGESTUFF) stage3
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
-if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage3 || cp as$(exeext) stage3 ; else true ; fi
-if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage3 || cp ld$(exeext) stage3 ; else true ; fi
-if [ -f collect-ld$(exeext) ] ; then ln -s ../collect-ld$(exeext) stage3 || cp collect-ld$(exeext) stage3 ; else true ; fi
-rm -f stage3/libgcc.a
-cp libgcc.a stage3
-if $(RANLIB_TEST) ; then $(RANLIB) stage3/libgcc.a; else true; fi
stage3: force stage3-start lang.stage3
stage4-start:
-if [ -d stage4 ] ; then true ; else mkdir stage4 ; fi
-for dir in . $(SUBDIRS) ; \
do \
if [ -d stage4/$$dir ] ; then true ; else mkdir stage4/$$dir ; fi ; \
done
-mv $(STAGESTUFF) stage4
# Copy as/ld if they exist to stage dir, so that running xgcc from the stage
# dir will work properly.
-if [ -f as$(exeext) ] ; then ln -s ../as$(exeext) stage4 || cp as$(exeext) stage4 ; else true ; fi
-if [ -f ld$(exeext) ] ; then ln -s ../ld$(exeext) stage4 || cp ld$(exeext) stage4 ; else true ; fi
-if [ -f collect-ld$(exeext) ] ; then ln -s ../collect-ld$(exeext) stage4 || cp collect-ld$(exeext) stage4 ; else true ; fi
-rm -f stage4/libgcc.a
-cp libgcc.a stage4
-if $(RANLIB_TEST) ; then $(RANLIB) stage4/libgcc.a; else true; fi
stage4: force stage4-start lang.stage4
# Copy just the executable files from a particular stage into a subdirectory,
# and delete the object files. Use this if you're just verifying a version
# that is pretty sure to work, and you are short of disk space.
risky-stage1: stage1
- make clean
risky-stage2: stage2
-make clean
risky-stage3: stage3
-make clean
risky-stage4: stage4
-make clean
#In GNU Make, ignore whether `stage*' exists.
.PHONY: stage1 stage2 stage3 stage4 clean maintainer-clean TAGS bootstrap
.PHONY: risky-stage1 risky-stage2 risky-stage3 risky-stage4
force: