1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00
freebsd/sys/kern/tty_outq.c
2009-02-26 10:28:32 +00:00

352 lines
9.0 KiB
C

/*-
* Copyright (c) 2008 Ed Schouten <ed@FreeBSD.org>
* All rights reserved.
*
* Portions of this software were developed under sponsorship from Snow
* B.V., the Netherlands.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/queue.h>
#include <sys/sysctl.h>
#include <sys/systm.h>
#include <sys/tty.h>
#include <sys/uio.h>
#include <vm/uma.h>
/*
* TTY output queue buffering.
*
* The previous design of the TTY layer offered the so-called clists.
* These clists were used for both the input queues and the output
* queue. We don't use certain features on the output side, like quoting
* bits for parity marking and such. This mechanism is similar to the
* old clists, but only contains the features we need to buffer the
* output.
*/
/* Statistics. */
static unsigned long ttyoutq_nfast = 0;
SYSCTL_ULONG(_kern, OID_AUTO, tty_outq_nfast, CTLFLAG_RD,
&ttyoutq_nfast, 0, "Unbuffered reads to userspace on output");
static unsigned long ttyoutq_nslow = 0;
SYSCTL_ULONG(_kern, OID_AUTO, tty_outq_nslow, CTLFLAG_RD,
&ttyoutq_nslow, 0, "Buffered reads to userspace on output");
struct ttyoutq_block {
struct ttyoutq_block *tob_next;
char tob_data[TTYOUTQ_DATASIZE];
};
static uma_zone_t ttyoutq_zone;
#define TTYOUTQ_INSERT_TAIL(to, tob) do { \
if (to->to_end == 0) { \
tob->tob_next = to->to_firstblock; \
to->to_firstblock = tob; \
} else { \
tob->tob_next = to->to_lastblock->tob_next; \
to->to_lastblock->tob_next = tob; \
} \
to->to_nblocks++; \
} while (0)
#define TTYOUTQ_REMOVE_HEAD(to) do { \
to->to_firstblock = to->to_firstblock->tob_next; \
to->to_nblocks--; \
} while (0)
#define TTYOUTQ_RECYCLE(to, tob) do { \
if (to->to_quota <= to->to_nblocks) \
uma_zfree(ttyoutq_zone, tob); \
else \
TTYOUTQ_INSERT_TAIL(to, tob); \
} while(0)
void
ttyoutq_flush(struct ttyoutq *to)
{
to->to_begin = 0;
to->to_end = 0;
}
void
ttyoutq_setsize(struct ttyoutq *to, struct tty *tp, size_t size)
{
struct ttyoutq_block *tob;
to->to_quota = howmany(size, TTYOUTQ_DATASIZE);
while (to->to_quota > to->to_nblocks) {
/*
* List is getting bigger.
* Add new blocks to the tail of the list.
*
* We must unlock the TTY temporarily, because we need
* to allocate memory. This won't be a problem, because
* in the worst case, another thread ends up here, which
* may cause us to allocate too many blocks, but this
* will be caught by the loop below.
*/
tty_unlock(tp);
tob = uma_zalloc(ttyoutq_zone, M_WAITOK);
tty_lock(tp);
TTYOUTQ_INSERT_TAIL(to, tob);
}
}
void
ttyoutq_free(struct ttyoutq *to)
{
struct ttyoutq_block *tob;
ttyoutq_flush(to);
to->to_quota = 0;
while ((tob = to->to_firstblock) != NULL) {
TTYOUTQ_REMOVE_HEAD(to);
uma_zfree(ttyoutq_zone, tob);
}
MPASS(to->to_nblocks == 0);
}
size_t
ttyoutq_read(struct ttyoutq *to, void *buf, size_t len)
{
char *cbuf = buf;
while (len > 0) {
struct ttyoutq_block *tob;
size_t cbegin, cend, clen;
/* See if there still is data. */
if (to->to_begin == to->to_end)
break;
tob = to->to_firstblock;
if (tob == NULL)
break;
/*
* The end address should be the lowest of these three:
* - The write pointer
* - The blocksize - we can't read beyond the block
* - The end address if we could perform the full read
*/
cbegin = to->to_begin;
cend = MIN(MIN(to->to_end, to->to_begin + len),
TTYOUTQ_DATASIZE);
clen = cend - cbegin;
/* Copy the data out of the buffers. */
memcpy(cbuf, tob->tob_data + cbegin, clen);
cbuf += clen;
len -= clen;
if (cend == to->to_end) {
/* Read the complete queue. */
to->to_begin = 0;
to->to_end = 0;
} else if (cend == TTYOUTQ_DATASIZE) {
/* Read the block until the end. */
TTYOUTQ_REMOVE_HEAD(to);
to->to_begin = 0;
to->to_end -= TTYOUTQ_DATASIZE;
TTYOUTQ_RECYCLE(to, tob);
} else {
/* Read the block partially. */
to->to_begin += clen;
}
}
return (cbuf - (char *)buf);
}
/*
* An optimized version of ttyoutq_read() which can be used in pseudo
* TTY drivers to directly copy data from the outq to userspace, instead
* of buffering it.
*
* We can only copy data directly if we need to read the entire block
* back to the user, because we temporarily remove the block from the
* queue. Otherwise we need to copy it to a temporary buffer first, to
* make sure data remains in the correct order.
*/
int
ttyoutq_read_uio(struct ttyoutq *to, struct tty *tp, struct uio *uio)
{
while (uio->uio_resid > 0) {
int error;
struct ttyoutq_block *tob;
size_t cbegin, cend, clen;
/* See if there still is data. */
if (to->to_begin == to->to_end)
return (0);
tob = to->to_firstblock;
if (tob == NULL)
return (0);
/*
* The end address should be the lowest of these three:
* - The write pointer
* - The blocksize - we can't read beyond the block
* - The end address if we could perform the full read
*/
cbegin = to->to_begin;
cend = MIN(MIN(to->to_end, to->to_begin + uio->uio_resid),
TTYOUTQ_DATASIZE);
clen = cend - cbegin;
/*
* We can prevent buffering in some cases:
* - We need to read the block until the end.
* - We don't need to read the block until the end, but
* there is no data beyond it, which allows us to move
* the write pointer to a new block.
*/
if (cend == TTYOUTQ_DATASIZE || cend == to->to_end) {
atomic_add_long(&ttyoutq_nfast, 1);
/*
* Fast path: zero copy. Remove the first block,
* so we can unlock the TTY temporarily.
*/
TTYOUTQ_REMOVE_HEAD(to);
to->to_begin = 0;
if (to->to_end <= TTYOUTQ_DATASIZE)
to->to_end = 0;
else
to->to_end -= TTYOUTQ_DATASIZE;
/* Temporary unlock and copy the data to userspace. */
tty_unlock(tp);
error = uiomove(tob->tob_data + cbegin, clen, uio);
tty_lock(tp);
/* Block can now be readded to the list. */
TTYOUTQ_RECYCLE(to, tob);
} else {
char ob[TTYOUTQ_DATASIZE - 1];
atomic_add_long(&ttyoutq_nslow, 1);
/*
* Slow path: store data in a temporary buffer.
*/
memcpy(ob, tob->tob_data + cbegin, clen);
to->to_begin += clen;
MPASS(to->to_begin < TTYOUTQ_DATASIZE);
/* Temporary unlock and copy the data to userspace. */
tty_unlock(tp);
error = uiomove(ob, clen, uio);
tty_lock(tp);
}
if (error != 0)
return (error);
}
return (0);
}
size_t
ttyoutq_write(struct ttyoutq *to, const void *buf, size_t nbytes)
{
const char *cbuf = buf;
struct ttyoutq_block *tob;
unsigned int boff;
size_t l;
while (nbytes > 0) {
boff = to->to_end % TTYOUTQ_DATASIZE;
if (to->to_end == 0) {
/* First time we're being used or drained. */
MPASS(to->to_begin == 0);
tob = to->to_firstblock;
if (tob == NULL) {
/* Queue has no blocks. */
break;
}
to->to_lastblock = tob;
} else if (boff == 0) {
/* We reached the end of this block on last write. */
tob = to->to_lastblock->tob_next;
if (tob == NULL) {
/* We've reached the watermark. */
break;
}
to->to_lastblock = tob;
} else {
tob = to->to_lastblock;
}
/* Don't copy more than was requested. */
l = MIN(nbytes, TTYOUTQ_DATASIZE - boff);
MPASS(l > 0);
memcpy(tob->tob_data + boff, cbuf, l);
cbuf += l;
nbytes -= l;
to->to_end += l;
}
return (cbuf - (const char *)buf);
}
int
ttyoutq_write_nofrag(struct ttyoutq *to, const void *buf, size_t nbytes)
{
size_t ret;
if (ttyoutq_bytesleft(to) < nbytes)
return (-1);
/* We should always be able to write it back. */
ret = ttyoutq_write(to, buf, nbytes);
MPASS(ret == nbytes);
return (0);
}
static void
ttyoutq_startup(void *dummy)
{
ttyoutq_zone = uma_zcreate("ttyoutq", sizeof(struct ttyoutq_block),
NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, 0);
}
SYSINIT(ttyoutq, SI_SUB_DRIVERS, SI_ORDER_FIRST, ttyoutq_startup, NULL);