freebsd/sys/netinet6/udp6_usrreq.c

/*-
 * Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the project nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	$KAME: udp6_usrreq.c,v 1.27 2001/05/21 05:45:10 jinmei Exp $
 *	$KAME: udp6_output.c,v 1.31 2001/05/21 16:39:15 jinmei Exp $
 */

/*-
 * Copyright (c) 1982, 1986, 1988, 1990, 1993, 1995
 *	The Regents of the University of California.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 4. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 *	@(#)udp_usrreq.c	8.6 (Berkeley) 5/23/95
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include "opt_mac.h"

#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mbuf.h>
#include <sys/priv.h>
#include <sys/proc.h>
#include <sys/protosw.h>
#include <sys/signalvar.h>
#include <sys/socket.h>
#include <sys/socketvar.h>
#include <sys/sx.h>
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/systm.h>

#include <net/if.h>
#include <net/if_types.h>
#include <net/route.h>

#include <netinet/in.h>
#include <netinet/in_pcb.h>
#include <netinet/in_systm.h>
#include <netinet/in_var.h>
#include <netinet/ip.h>
#include <netinet/ip_icmp.h>
#include <netinet/ip6.h>
#include <netinet/icmp_var.h>
#include <netinet/icmp6.h>
#include <netinet/ip_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
#include <netinet6/ip6protosw.h>
#include <netinet6/ip6_var.h>
#include <netinet6/in6_pcb.h>
#include <netinet6/udp6_var.h>
#include <netinet6/scope6_var.h>

#ifdef IPSEC
#include <netipsec/ipsec.h>
#include <netipsec/ipsec6.h>
#endif /* IPSEC */

#include <security/mac/mac_framework.h>

/*
 * UDP protocol implementation.
 * Per RFC 768, August, 1980.
 */

extern struct protosw	inetsw[];
static void		udp6_detach(struct socket *so);

static void
udp6_append(struct inpcb *inp, struct mbuf *n, int off,
    struct sockaddr_in6 *fromsa)
{
	struct socket *so;
	struct mbuf *opts;

	INP_LOCK_ASSERT(inp);

#ifdef IPSEC
	/* Check AH/ESP integrity. */
	if (ipsec6_in_reject(n, inp)) {
		m_freem(n);
		ipsec6stat.in_polvio++;
		return;
	}
#endif /* IPSEC */
#ifdef MAC
	if (mac_inpcb_check_deliver(inp, n) != 0) {
		m_freem(n);
		return;
	}
#endif
	opts = NULL;
	if (inp->in6p_flags & IN6P_CONTROLOPTS ||
	    inp->inp_socket->so_options & SO_TIMESTAMP)
		ip6_savecontrol(inp, n, &opts);
	m_adj(n, off + sizeof(struct udphdr));

	so = inp->inp_socket;
	SOCKBUF_LOCK(&so->so_rcv);
	if (sbappendaddr_locked(&so->so_rcv, (struct sockaddr *)fromsa, n,
	    opts) == 0) {
		SOCKBUF_UNLOCK(&so->so_rcv);
		m_freem(n);
		if (opts)
			m_freem(opts);
		udpstat.udps_fullsock++;
	} else
		sorwakeup_locked(so);
}

int
udp6_input(struct mbuf **mp, int *offp, int proto)
{
	struct mbuf *m = *mp;
	struct ip6_hdr *ip6;
	struct udphdr *uh;
	struct inpcb *inp;
	int off = *offp;
	int plen, ulen;
	struct sockaddr_in6 fromsa;

	ip6 = mtod(m, struct ip6_hdr *);

	if (faithprefix_p != NULL && (*faithprefix_p)(&ip6->ip6_dst)) {
		/* XXX send icmp6 host/port unreach? */
		m_freem(m);
		return (IPPROTO_DONE);
	}

#ifndef PULLDOWN_TEST
	IP6_EXTHDR_CHECK(m, off, sizeof(struct udphdr), IPPROTO_DONE);
	ip6 = mtod(m, struct ip6_hdr *);
	uh = (struct udphdr *)((caddr_t)ip6 + off);
#else
	IP6_EXTHDR_GET(uh, struct udphdr *, m, off, sizeof(*uh));
	if (!uh)
		return (IPPROTO_DONE);
#endif

	udpstat.udps_ipackets++;

	/*
	 * Destination port of 0 is illegal, based on RFC768.
	 */
	if (uh->uh_dport == 0)
		goto badunlocked;

	plen = ntohs(ip6->ip6_plen) - off + sizeof(*ip6);
	ulen = ntohs((u_short)uh->uh_ulen);

	if (plen != ulen) {
		udpstat.udps_badlen++;
		goto badunlocked;
	}

	/*
	 * Checksum extended UDP header and data.
	 */
	if (uh->uh_sum == 0) {
		udpstat.udps_nosum++;
		goto badunlocked;
	}
	if (in6_cksum(m, IPPROTO_UDP, off, ulen) != 0) {
		udpstat.udps_badsum++;
		goto badunlocked;
	}

	/*
	 * Construct sockaddr format source address.
	 */
	init_sin6(&fromsa, m);
	fromsa.sin6_port = uh->uh_sport;

	INP_INFO_RLOCK(&udbinfo);
	if (IN6_IS_ADDR_MULTICAST(&ip6->ip6_dst)) {
		struct inpcb *last;

		/*
		 * In the event that laddr should be set to the link-local
		 * address (this happens in RIPng), the multicast address
		 * specified in the received packet will not match laddr.  To
		 * handle this situation, matching is relaxed if the
		 * receiving interface is the same as one specified in the
		 * socket and if the destination multicast address matches
		 * one of the multicast groups specified in the socket.
		 */

		/*
		 * KAME note: traditionally we dropped udpiphdr from mbuf
		 * here.  We need udphdr for IPsec processing so we do that
		 * later.
		 */
		last = NULL;
		LIST_FOREACH(inp, &udb, inp_list) {
			if ((inp->inp_vflag & INP_IPV6) == 0)
				continue;
			if (inp->in6p_lport != uh->uh_dport)
				continue;
			/*
			 * XXX: Do not check source port of incoming datagram
			 * unless inp_connect() has been called to bind the
			 * fport part of the 4-tuple; the source could be
			 * trying to talk to us with an ephemeral port.
			 */
			if (inp->inp_fport != 0 &&
			    inp->inp_fport != uh->uh_sport)
				continue;
			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr)) {
				if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_laddr,
							&ip6->ip6_dst))
					continue;
			}
			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
				if (!IN6_ARE_ADDR_EQUAL(&inp->in6p_faddr,
							&ip6->ip6_src) ||
				    inp->in6p_fport != uh->uh_sport)
					continue;
			}

			if (last != NULL) {
				struct mbuf *n;

				if ((n = m_copy(m, 0, M_COPYALL)) != NULL) {
					INP_RLOCK(last);
					udp6_append(last, n, off, &fromsa);
					INP_RUNLOCK(last);
				}
			}
			last = inp;
			/*
			 * Don't look for additional matches if this one does
			 * not have either the SO_REUSEPORT or SO_REUSEADDR
			 * socket options set.  This heuristic avoids
			 * searching through all pcbs in the common case of a
			 * non-shared port.  It assumes that an application
			 * will never clear these options after setting them.
			 */
			if ((last->inp_socket->so_options &
			     (SO_REUSEPORT|SO_REUSEADDR)) == 0)
				break;
		}

		if (last == NULL) {
			/*
			 * No matching pcb found; discard datagram.  (No need
			 * to send an ICMP Port Unreachable for a broadcast
			 * or multicast datgram.)
			 */
			udpstat.udps_noport++;
			udpstat.udps_noportmcast++;
			goto badheadlocked;
		}
		INP_RLOCK(last);
		udp6_append(last, m, off, &fromsa);
		INP_RUNLOCK(last);
		INP_INFO_RUNLOCK(&udbinfo);
		return (IPPROTO_DONE);
	}
	/*
	 * Locate pcb for datagram.
	 */
	inp = in6_pcblookup_hash(&udbinfo, &ip6->ip6_src, uh->uh_sport,
	    &ip6->ip6_dst, uh->uh_dport, 1, m->m_pkthdr.rcvif);
	if (inp == NULL) {
		if (udp_log_in_vain) {
			char ip6bufs[INET6_ADDRSTRLEN];
			char ip6bufd[INET6_ADDRSTRLEN];

			log(LOG_INFO,
			    "Connection attempt to UDP [%s]:%d from [%s]:%d\n",
			    ip6_sprintf(ip6bufd, &ip6->ip6_dst),
			    ntohs(uh->uh_dport),
			    ip6_sprintf(ip6bufs, &ip6->ip6_src),
			    ntohs(uh->uh_sport));
		}
		udpstat.udps_noport++;
		if (m->m_flags & M_MCAST) {
			printf("UDP6: M_MCAST is set in a unicast packet.\n");
			udpstat.udps_noportmcast++;
			goto badheadlocked;
		}
		INP_INFO_RUNLOCK(&udbinfo);
		if (udp_blackhole)
			goto badunlocked;
		if (badport_bandlim(BANDLIM_ICMP6_UNREACH) < 0)
			goto badunlocked;
		icmp6_error(m, ICMP6_DST_UNREACH, ICMP6_DST_UNREACH_NOPORT, 0);
		return (IPPROTO_DONE);
	}
	INP_RLOCK(inp);
	udp6_append(inp, m, off, &fromsa);
	INP_RUNLOCK(inp);
	INP_INFO_RUNLOCK(&udbinfo);
	return (IPPROTO_DONE);

badheadlocked:
	INP_INFO_RUNLOCK(&udbinfo);
badunlocked:
	if (m)
		m_freem(m);
	return (IPPROTO_DONE);
}

void
udp6_ctlinput(int cmd, struct sockaddr *sa, void *d)
{
	struct udphdr uh;
	struct ip6_hdr *ip6;
	struct mbuf *m;
	int off = 0;
	struct ip6ctlparam *ip6cp = NULL;
	const struct sockaddr_in6 *sa6_src = NULL;
	void *cmdarg;
	struct inpcb *(*notify)(struct inpcb *, int) = udp_notify;
	struct udp_portonly {
		u_int16_t uh_sport;
		u_int16_t uh_dport;
	} *uhp;

	if (sa->sa_family != AF_INET6 ||
	    sa->sa_len != sizeof(struct sockaddr_in6))
		return;

	if ((unsigned)cmd >= PRC_NCMDS)
		return;
	if (PRC_IS_REDIRECT(cmd))
		notify = in6_rtchange, d = NULL;
	else if (cmd == PRC_HOSTDEAD)
		d = NULL;
	else if (inet6ctlerrmap[cmd] == 0)
		return;

	/* if the parameter is from icmp6, decode it. */
	if (d != NULL) {
		ip6cp = (struct ip6ctlparam *)d;
		m = ip6cp->ip6c_m;
		ip6 = ip6cp->ip6c_ip6;
		off = ip6cp->ip6c_off;
		cmdarg = ip6cp->ip6c_cmdarg;
		sa6_src = ip6cp->ip6c_src;
	} else {
		m = NULL;
		ip6 = NULL;
		cmdarg = NULL;
		sa6_src = &sa6_any;
	}

	if (ip6) {
		/*
		 * XXX: We assume that when IPV6 is non NULL,
		 * M and OFF are valid.
		 */

		/* Check if we can safely examine src and dst ports. */
		if (m->m_pkthdr.len < off + sizeof(*uhp))
			return;

		bzero(&uh, sizeof(uh));
		m_copydata(m, off, sizeof(*uhp), (caddr_t)&uh);

		(void) in6_pcbnotify(&udbinfo, sa, uh.uh_dport,
		    (struct sockaddr *)ip6cp->ip6c_src, uh.uh_sport, cmd,
		    cmdarg, notify);
	} else
		(void) in6_pcbnotify(&udbinfo, sa, 0,
		    (const struct sockaddr *)sa6_src, 0, cmd, cmdarg, notify);
}

static int
udp6_getcred(SYSCTL_HANDLER_ARGS)
{
	struct xucred xuc;
	struct sockaddr_in6 addrs[2];
	struct inpcb *inp;
	int error;

	error = priv_check(req->td, PRIV_NETINET_GETCRED);
	if (error)
		return (error);

	if (req->newlen != sizeof(addrs))
		return (EINVAL);
	if (req->oldlen != sizeof(struct xucred))
		return (EINVAL);
	error = SYSCTL_IN(req, addrs, sizeof(addrs));
	if (error)
		return (error);
	if ((error = sa6_embedscope(&addrs[0], ip6_use_defzone)) != 0 ||
	    (error = sa6_embedscope(&addrs[1], ip6_use_defzone)) != 0) {
		return (error);
	}
	INP_INFO_RLOCK(&udbinfo);
	inp = in6_pcblookup_hash(&udbinfo, &addrs[1].sin6_addr,
	    addrs[1].sin6_port, &addrs[0].sin6_addr, addrs[0].sin6_port, 1,
	    NULL);
	if (inp == NULL) {
		INP_INFO_RUNLOCK(&udbinfo);
		return (ENOENT);
	}
	INP_RLOCK(inp);
	if (inp->inp_socket == NULL) {
		error = ENOENT;
		goto out;
	}
	error = cr_canseesocket(req->td->td_ucred, inp->inp_socket);
	if (error)
		goto out;
	cru2x(inp->inp_socket->so_cred, &xuc);
out:
	INP_RUNLOCK(inp);
	INP_INFO_RUNLOCK(&udbinfo);
	if (error == 0)
		error = SYSCTL_OUT(req, &xuc, sizeof(struct xucred));
	return (error);
}

SYSCTL_PROC(_net_inet6_udp6, OID_AUTO, getcred, CTLTYPE_OPAQUE|CTLFLAG_RW, 0,
    0, udp6_getcred, "S,xucred", "Get the xucred of a UDP6 connection");

static int
udp6_output(struct inpcb *inp, struct mbuf *m, struct sockaddr *addr6,
    struct mbuf *control, struct thread *td)
{
	u_int32_t ulen = m->m_pkthdr.len;
	u_int32_t plen = sizeof(struct udphdr) + ulen;
	struct ip6_hdr *ip6;
	struct udphdr *udp6;
	struct in6_addr *laddr, *faddr;
	struct sockaddr_in6 *sin6 = NULL;
	struct ifnet *oifp = NULL;
	int scope_ambiguous = 0;
	u_short fport;
	int error = 0;
	struct ip6_pktopts *optp, opt;
	int af = AF_INET6, hlen = sizeof(struct ip6_hdr);
	int flags;
	struct sockaddr_in6 tmp;

	INP_WLOCK_ASSERT(inp);

	if (addr6) {
		/* addr6 has been validated in udp6_send(). */
		sin6 = (struct sockaddr_in6 *)addr6;

		/* protect *sin6 from overwrites */
		tmp = *sin6;
		sin6 = &tmp;

		/*
		 * Application should provide a proper zone ID or the use of
		 * default zone IDs should be enabled.  Unfortunately, some
		 * applications do not behave as it should, so we need a
		 * workaround.  Even if an appropriate ID is not determined,
		 * we'll see if we can determine the outgoing interface.  If we
		 * can, determine the zone ID based on the interface below.
		 */
		if (sin6->sin6_scope_id == 0 && !ip6_use_defzone)
			scope_ambiguous = 1;
		if ((error = sa6_embedscope(sin6, ip6_use_defzone)) != 0)
			return (error);
	}

	if (control) {
		if ((error = ip6_setpktopts(control, &opt,
		    inp->in6p_outputopts, td->td_ucred, IPPROTO_UDP)) != 0)
			goto release;
		optp = &opt;
	} else
		optp = inp->in6p_outputopts;

	if (sin6) {
		faddr = &sin6->sin6_addr;

		/*
		 * IPv4 version of udp_output calls in_pcbconnect in this case,
		 * which needs splnet and affects performance.
		 * Since we saw no essential reason for calling in_pcbconnect,
		 * we get rid of such kind of logic, and call in6_selectsrc
		 * and in6_pcbsetport in order to fill in the local address
		 * and the local port.
		 */
		if (sin6->sin6_port == 0) {
			error = EADDRNOTAVAIL;
			goto release;
		}

		if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
			/* how about ::ffff:0.0.0.0 case? */
			error = EISCONN;
			goto release;
		}

		fport = sin6->sin6_port; /* allow 0 port */

		if (IN6_IS_ADDR_V4MAPPED(faddr)) {
			if ((inp->in6p_flags & IN6P_IPV6_V6ONLY)) {
				/*
				 * I believe we should explicitly discard the
				 * packet when mapped addresses are disabled,
				 * rather than send the packet as an IPv6 one.
				 * If we chose the latter approach, the packet
				 * might be sent out on the wire based on the
				 * default route, the situation which we'd
				 * probably want to avoid.
				 * (20010421 jinmei@kame.net)
				 */
				error = EINVAL;
				goto release;
			}
			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
			    !IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) {
				/*
				 * when remote addr is an IPv4-mapped address,
				 * local addr should not be an IPv6 address,
				 * since you cannot determine how to map IPv6
				 * source address to IPv4.
				 */
				error = EINVAL;
				goto release;
			}

			af = AF_INET;
		}

		if (!IN6_IS_ADDR_V4MAPPED(faddr)) {
			laddr = in6_selectsrc(sin6, optp, inp->in6p_moptions,
			    NULL, &inp->in6p_laddr, &oifp, &error);
			if (oifp && scope_ambiguous &&
			    (error = in6_setscope(&sin6->sin6_addr,
			    oifp, NULL))) {
				goto release;
			}
		} else
			laddr = &inp->in6p_laddr;	/* XXX */
		if (laddr == NULL) {
			if (error == 0)
				error = EADDRNOTAVAIL;
			goto release;
		}
		if (inp->in6p_lport == 0 &&
		    (error = in6_pcbsetport(laddr, inp, td->td_ucred)) != 0)
			goto release;
	} else {
		if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
			error = ENOTCONN;
			goto release;
		}
		if (IN6_IS_ADDR_V4MAPPED(&inp->in6p_faddr)) {
			if ((inp->in6p_flags & IN6P_IPV6_V6ONLY)) {
				/*
				 * XXX: this case would happen when the
				 * application sets the V6ONLY flag after
				 * connecting the foreign address.
				 * Such applications should be fixed,
				 * so we bark here.
				 */
				log(LOG_INFO, "udp6_output: IPV6_V6ONLY "
				    "option was set for a connected socket\n");
				error = EINVAL;
				goto release;
			} else
				af = AF_INET;
		}
		laddr = &inp->in6p_laddr;
		faddr = &inp->in6p_faddr;
		fport = inp->in6p_fport;
	}

	if (af == AF_INET)
		hlen = sizeof(struct ip);

	/*
	 * Calculate data length and get a mbuf
	 * for UDP and IP6 headers.
	 */
	M_PREPEND(m, hlen + sizeof(struct udphdr), M_DONTWAIT);
	if (m == 0) {
		error = ENOBUFS;
		goto release;
	}

	/*
	 * Stuff checksum and output datagram.
	 */
	udp6 = (struct udphdr *)(mtod(m, caddr_t) + hlen);
	udp6->uh_sport = inp->in6p_lport; /* lport is always set in the PCB */
	udp6->uh_dport = fport;
	if (plen <= 0xffff)
		udp6->uh_ulen = htons((u_short)plen);
	else
		udp6->uh_ulen = 0;
	udp6->uh_sum = 0;

	switch (af) {
	case AF_INET6:
		ip6 = mtod(m, struct ip6_hdr *);
		ip6->ip6_flow	= inp->in6p_flowinfo & IPV6_FLOWINFO_MASK;
		ip6->ip6_vfc	&= ~IPV6_VERSION_MASK;
		ip6->ip6_vfc	|= IPV6_VERSION;
#if 0				/* ip6_plen will be filled in ip6_output. */
		ip6->ip6_plen	= htons((u_short)plen);
#endif
		ip6->ip6_nxt	= IPPROTO_UDP;
		ip6->ip6_hlim	= in6_selecthlim(inp, NULL);
		ip6->ip6_src	= *laddr;
		ip6->ip6_dst	= *faddr;

		if ((udp6->uh_sum = in6_cksum(m, IPPROTO_UDP,
				sizeof(struct ip6_hdr), plen)) == 0) {
			udp6->uh_sum = 0xffff;
		}

		flags = 0;

		udpstat.udps_opackets++;
		error = ip6_output(m, optp, NULL, flags, inp->in6p_moptions,
		    NULL, inp);
		break;
	case AF_INET:
		error = EAFNOSUPPORT;
		goto release;
	}
	goto releaseopt;

release:
	m_freem(m);

releaseopt:
	if (control) {
		ip6_clearpktopts(&opt, -1);
		m_freem(control);
	}
	return (error);
}

static void
udp6_abort(struct socket *so)
{
	struct inpcb *inp;

	inp = sotoinpcb(so);
	KASSERT(inp != NULL, ("udp6_abort: inp == NULL"));

#ifdef INET
	if (inp->inp_vflag & INP_IPV4) {
		struct pr_usrreqs *pru;

		pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
		(*pru->pru_abort)(so);
		return;
	}
#endif

	INP_INFO_WLOCK(&udbinfo);
	INP_WLOCK(inp);
	if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
		in6_pcbdisconnect(inp);
		inp->in6p_laddr = in6addr_any;
		soisdisconnected(so);
	}
	INP_WUNLOCK(inp);
	INP_INFO_WUNLOCK(&udbinfo);
}

static int
udp6_attach(struct socket *so, int proto, struct thread *td)
{
	struct inpcb *inp;
	int error;

	inp = sotoinpcb(so);
	KASSERT(inp == NULL, ("udp6_attach: inp != NULL"));

	if (so->so_snd.sb_hiwat == 0 || so->so_rcv.sb_hiwat == 0) {
		error = soreserve(so, udp_sendspace, udp_recvspace);
		if (error)
			return (error);
	}
	INP_INFO_WLOCK(&udbinfo);
	error = in_pcballoc(so, &udbinfo);
	if (error) {
		INP_INFO_WUNLOCK(&udbinfo);
		return (error);
	}
	inp = (struct inpcb *)so->so_pcb;
	INP_INFO_WUNLOCK(&udbinfo);
	inp->inp_vflag |= INP_IPV6;
	if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0)
		inp->inp_vflag |= INP_IPV4;
	inp->in6p_hops = -1;	/* use kernel default */
	inp->in6p_cksum = -1;	/* just to be sure */
	/*
	 * XXX: ugly!!
	 * IPv4 TTL initialization is necessary for an IPv6 socket as well,
	 * because the socket may be bound to an IPv6 wildcard address,
	 * which may match an IPv4-mapped IPv6 address.
	 */
	inp->inp_ip_ttl = ip_defttl;
	INP_WUNLOCK(inp);
	return (0);
}

static int
udp6_bind(struct socket *so, struct sockaddr *nam, struct thread *td)
{
	struct inpcb *inp;
	int error;

	inp = sotoinpcb(so);
	KASSERT(inp != NULL, ("udp6_bind: inp == NULL"));

	INP_INFO_WLOCK(&udbinfo);
	INP_WLOCK(inp);
	inp->inp_vflag &= ~INP_IPV4;
	inp->inp_vflag |= INP_IPV6;
	if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
		struct sockaddr_in6 *sin6_p;

		sin6_p = (struct sockaddr_in6 *)nam;

		if (IN6_IS_ADDR_UNSPECIFIED(&sin6_p->sin6_addr))
			inp->inp_vflag |= INP_IPV4;
		else if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
			struct sockaddr_in sin;

			in6_sin6_2_sin(&sin, sin6_p);
			inp->inp_vflag |= INP_IPV4;
			inp->inp_vflag &= ~INP_IPV6;
			error = in_pcbbind(inp, (struct sockaddr *)&sin,
			    td->td_ucred);
			goto out;
		}
	}

	error = in6_pcbbind(inp, nam, td->td_ucred);
out:
	INP_WUNLOCK(inp);
	INP_INFO_WUNLOCK(&udbinfo);
	return (error);
}

static void
udp6_close(struct socket *so)
{
	struct inpcb *inp;

	inp = sotoinpcb(so);
	KASSERT(inp != NULL, ("udp6_close: inp == NULL"));

#ifdef INET
	if (inp->inp_vflag & INP_IPV4) {
		struct pr_usrreqs *pru;

		pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
		(*pru->pru_disconnect)(so);
		return;
	}
#endif
	INP_INFO_WLOCK(&udbinfo);
	INP_WLOCK(inp);
	if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
		in6_pcbdisconnect(inp);
		inp->in6p_laddr = in6addr_any;
		soisdisconnected(so);
	}
	INP_WUNLOCK(inp);
	INP_INFO_WUNLOCK(&udbinfo);
}

static int
udp6_connect(struct socket *so, struct sockaddr *nam, struct thread *td)
{
	struct inpcb *inp;
	int error;

	inp = sotoinpcb(so);
	KASSERT(inp != NULL, ("udp6_connect: inp == NULL"));

	INP_INFO_WLOCK(&udbinfo);
	INP_WLOCK(inp);
	if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
		struct sockaddr_in6 *sin6_p;

		sin6_p = (struct sockaddr_in6 *)nam;
		if (IN6_IS_ADDR_V4MAPPED(&sin6_p->sin6_addr)) {
			struct sockaddr_in sin;

			if (inp->inp_faddr.s_addr != INADDR_ANY) {
				error = EISCONN;
				goto out;
			}
			in6_sin6_2_sin(&sin, sin6_p);
			error = in_pcbconnect(inp, (struct sockaddr *)&sin,
			    td->td_ucred);
			if (error == 0) {
				inp->inp_vflag |= INP_IPV4;
				inp->inp_vflag &= ~INP_IPV6;
				soisconnected(so);
			}
			goto out;
		}
	}
	if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
		error = EISCONN;
		goto out;
	}
	error = in6_pcbconnect(inp, nam, td->td_ucred);
	if (error == 0) {
		if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
			/* should be non mapped addr */
			inp->inp_vflag &= ~INP_IPV4;
			inp->inp_vflag |= INP_IPV6;
		}
		soisconnected(so);
	}
out:
	INP_WUNLOCK(inp);
	INP_INFO_WUNLOCK(&udbinfo);
	return (error);
}

static void
udp6_detach(struct socket *so)
{
	struct inpcb *inp;

	inp = sotoinpcb(so);
	KASSERT(inp != NULL, ("udp6_detach: inp == NULL"));

	INP_INFO_WLOCK(&udbinfo);
	INP_WLOCK(inp);
	in6_pcbdetach(inp);
	in6_pcbfree(inp);
	INP_INFO_WUNLOCK(&udbinfo);
}

static int
udp6_disconnect(struct socket *so)
{
	struct inpcb *inp;
	int error;

	inp = sotoinpcb(so);
	KASSERT(inp != NULL, ("udp6_disconnect: inp == NULL"));

	INP_INFO_WLOCK(&udbinfo);
	INP_WLOCK(inp);

#ifdef INET
	if (inp->inp_vflag & INP_IPV4) {
		struct pr_usrreqs *pru;

		pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
		error = (*pru->pru_disconnect)(so);
		goto out;
	}
#endif

	if (IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_faddr)) {
		error = ENOTCONN;
		goto out;
	}

	in6_pcbdisconnect(inp);
	inp->in6p_laddr = in6addr_any;
	/* XXXRW: so_state locking? */
	so->so_state &= ~SS_ISCONNECTED;		/* XXX */
out:
	INP_WUNLOCK(inp);
	INP_INFO_WUNLOCK(&udbinfo);
	return (0);
}

static int
udp6_send(struct socket *so, int flags, struct mbuf *m,
    struct sockaddr *addr, struct mbuf *control, struct thread *td)
{
	struct inpcb *inp;
	int error = 0;

	inp = sotoinpcb(so);
	KASSERT(inp != NULL, ("udp6_send: inp == NULL"));

	INP_INFO_WLOCK(&udbinfo);
	INP_WLOCK(inp);
	if (addr) {
		if (addr->sa_len != sizeof(struct sockaddr_in6)) {
			error = EINVAL;
			goto bad;
		}
		if (addr->sa_family != AF_INET6) {
			error = EAFNOSUPPORT;
			goto bad;
		}
	}

#ifdef INET
	if ((inp->inp_flags & IN6P_IPV6_V6ONLY) == 0) {
		int hasv4addr;
		struct sockaddr_in6 *sin6 = 0;

		if (addr == 0)
			hasv4addr = (inp->inp_vflag & INP_IPV4);
		else {
			sin6 = (struct sockaddr_in6 *)addr;
			hasv4addr = IN6_IS_ADDR_V4MAPPED(&sin6->sin6_addr)
			    ? 1 : 0;
		}
		if (hasv4addr) {
			struct pr_usrreqs *pru;

			if (!IN6_IS_ADDR_UNSPECIFIED(&inp->in6p_laddr) &&
			    !IN6_IS_ADDR_V4MAPPED(&inp->in6p_laddr)) {
				/*
				 * When remote addr is IPv4-mapped address,
				 * local addr should not be an IPv6 address;
				 * since you cannot determine how to map IPv6
				 * source address to IPv4.
				 */
				error = EINVAL;
				goto out;
			}
			if (sin6)
				in6_sin6_2_sin_in_sock(addr);
			pru = inetsw[ip_protox[IPPROTO_UDP]].pr_usrreqs;
			error = ((*pru->pru_send)(so, flags, m, addr, control,
			    td));
			/* addr will just be freed in sendit(). */
			goto out;
		}
	}
#endif
#ifdef MAC
	mac_inpcb_create_mbuf(inp, m);
#endif
	error = udp6_output(inp, m, addr, control, td);
out:
	INP_WUNLOCK(inp);
	INP_INFO_WUNLOCK(&udbinfo);
	return (error);

bad:
	INP_WUNLOCK(inp);
	INP_INFO_WUNLOCK(&udbinfo);
	m_freem(m);
	return (error);
}

struct pr_usrreqs udp6_usrreqs = {
	.pru_abort =		udp6_abort,
	.pru_attach =		udp6_attach,
	.pru_bind =		udp6_bind,
	.pru_connect =		udp6_connect,
	.pru_control =		in6_control,
	.pru_detach =		udp6_detach,
	.pru_disconnect =	udp6_disconnect,
	.pru_peeraddr =		in6_mapped_peeraddr,
	.pru_send =		udp6_send,
	.pru_shutdown =		udp_shutdown,
	.pru_sockaddr =		in6_mapped_sockaddr,
	.pru_sosetlabel =	in_pcbsosetlabel,
	.pru_close =		udp6_close
};