mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-23 11:18:54 +00:00
1090 lines
26 KiB
C
1090 lines
26 KiB
C
/*
|
|
* Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Herb Peyerl.
|
|
* 4. The name of Herb Peyerl may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $Id$
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Created from if_ep.c driver by Fred Gray (fgray@rice.edu) to support
|
|
* the 3c590 family.
|
|
*/
|
|
|
|
/*
|
|
* Modified from the FreeBSD 1.1.5.1 version by:
|
|
* Andres Vega Garcia
|
|
* INRIA - Sophia Antipolis, France
|
|
* avega@sophia.inria.fr
|
|
*/
|
|
|
|
/*
|
|
* Promiscuous mode added and interrupt logic slightly changed
|
|
* to reduce the number of adapter failures. Transceiver select
|
|
* logic changed to use value from EEPROM. Autoconfiguration
|
|
* features added.
|
|
* Done by:
|
|
* Serge Babkin
|
|
* Chelindbank (Chelyabinsk, Russia)
|
|
* babkin@hq.icb.chel.su
|
|
*/
|
|
|
|
#include "vx.h"
|
|
#if NVX > 0
|
|
|
|
#if NVX < 4 /* These cost 4 bytes apiece, so give us 4 */
|
|
#undef NVX
|
|
#define NVX 4
|
|
#endif
|
|
|
|
#include "bpfilter.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
|
|
#include <net/ethernet.h>
|
|
#include <net/if_arp.h>
|
|
|
|
#if NBPFILTER > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
|
|
#include <machine/clock.h>
|
|
|
|
#include <dev/vx/if_vxreg.h>
|
|
|
|
#define ETHER_MAX_LEN 1518
|
|
#define ETHER_ADDR_LEN 6
|
|
|
|
struct vx_softc *vx_softc[NVX];
|
|
|
|
u_long vx_count; /* both PCI and EISA */
|
|
|
|
static struct connector_entry {
|
|
int bit;
|
|
char *name;
|
|
} conn_tab[VX_CONNECTORS] = {
|
|
#define CONNECTOR_UTP 0
|
|
{ 0x08, "utp"},
|
|
#define CONNECTOR_AUI 1
|
|
{ 0x20, "aui"},
|
|
/* dummy */
|
|
{ 0, "???"},
|
|
#define CONNECTOR_BNC 3
|
|
{ 0x10, "bnc"},
|
|
#define CONNECTOR_TX 4
|
|
{ 0x02, "tx"},
|
|
#define CONNECTOR_FX 5
|
|
{ 0x04, "fx"},
|
|
#define CONNECTOR_MII 6
|
|
{ 0x40, "mii"},
|
|
{ 0, "???"}
|
|
};
|
|
|
|
/* struct vx_softc *vxalloc __P((int)); */
|
|
/* void *vxfree __P((struct vx_softc *)); */
|
|
/* int vxattach __P((struct vx_softc *)); */
|
|
static void vxtxstat __P((struct vx_softc *));
|
|
static int vxstatus __P((struct vx_softc *));
|
|
static void vxinit __P((void *));
|
|
static int vxioctl __P((struct ifnet *, int, caddr_t));
|
|
static void vxstart __P((struct ifnet *ifp));
|
|
static void vxwatchdog __P((struct ifnet *));
|
|
static void vxreset __P((struct vx_softc *));
|
|
/* void vxstop __P((struct vx_softc *)); */
|
|
static void vxread __P((struct vx_softc *));
|
|
static struct mbuf *vxget __P((struct vx_softc *, u_int));
|
|
static void vxmbuffill __P((void *));
|
|
static void vxmbufempty __P((struct vx_softc *));
|
|
static void vxsetfilter __P((struct vx_softc *));
|
|
static void vxgetlink __P((struct vx_softc *));
|
|
static void vxsetlink __P((struct vx_softc *));
|
|
/* int vxbusyeeprom __P((struct vx_softc *)); */
|
|
/* void vxintr __P((void *)); */
|
|
|
|
struct vx_softc *
|
|
vxalloc(unit)
|
|
int unit;
|
|
{
|
|
struct vx_softc *sc;
|
|
|
|
if (unit >= NVX) {
|
|
printf("vx%d: unit number too high.\n", unit);
|
|
return NULL;
|
|
}
|
|
|
|
if (vx_softc[unit]) {
|
|
printf("vx%d: already allocated.\n", unit);
|
|
return NULL;
|
|
}
|
|
|
|
sc = malloc(sizeof(struct vx_softc), M_DEVBUF, M_NOWAIT);
|
|
if (sc == NULL) {
|
|
printf("vx%d: cannot malloc.\n", unit);
|
|
return NULL;
|
|
}
|
|
bzero(sc, sizeof(struct vx_softc));
|
|
callout_handle_init(&sc->ch);
|
|
|
|
vx_softc[unit] = sc;
|
|
sc->unit = unit;
|
|
return (sc);
|
|
}
|
|
|
|
void
|
|
vxfree(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
vx_softc[sc->unit] = NULL;
|
|
free(sc, M_DEVBUF);
|
|
return;
|
|
}
|
|
|
|
int
|
|
vxattach(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int i;
|
|
|
|
GO_WINDOW(0);
|
|
outw(VX_COMMAND, GLOBAL_RESET);
|
|
VX_BUSY_WAIT;
|
|
|
|
vxgetlink(sc);
|
|
|
|
/*
|
|
* Read the station address from the eeprom
|
|
*/
|
|
GO_WINDOW(0);
|
|
for (i = 0; i < 3; i++) {
|
|
int x;
|
|
if (vxbusyeeprom(sc))
|
|
return 0;
|
|
outw(BASE + VX_W0_EEPROM_COMMAND, EEPROM_CMD_RD
|
|
| (EEPROM_OEM_ADDR_0 + i));
|
|
if (vxbusyeeprom(sc))
|
|
return 0;
|
|
x = inw(BASE + VX_W0_EEPROM_DATA);
|
|
sc->arpcom.ac_enaddr[(i << 1)] = x >> 8;
|
|
sc->arpcom.ac_enaddr[(i << 1) + 1] = x;
|
|
}
|
|
|
|
printf(" address %6D\n", sc->arpcom.ac_enaddr, ":");
|
|
|
|
ifp->if_unit = sc->unit;
|
|
ifp->if_name = "vx";
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = vxstart;
|
|
ifp->if_ioctl = vxioctl;
|
|
ifp->if_init = vxinit;
|
|
ifp->if_watchdog = vxwatchdog;
|
|
ifp->if_softc = sc;
|
|
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp);
|
|
|
|
#if NBPFILTER > 0
|
|
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
|
|
#endif
|
|
|
|
sc->tx_start_thresh = 20; /* probably a good starting point. */
|
|
|
|
vxstop(sc);
|
|
|
|
return 1;
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
* The order in here seems important. Otherwise we may not receive
|
|
* interrupts. ?!
|
|
*/
|
|
static void
|
|
vxinit(xsc)
|
|
void *xsc;
|
|
{
|
|
struct vx_softc *sc = (struct vx_softc *) xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int i;
|
|
|
|
VX_BUSY_WAIT;
|
|
|
|
GO_WINDOW(2);
|
|
|
|
for (i = 0; i < 6; i++) /* Reload the ether_addr. */
|
|
outb(BASE + VX_W2_ADDR_0 + i, sc->arpcom.ac_enaddr[i]);
|
|
|
|
outw(BASE + VX_COMMAND, RX_RESET);
|
|
VX_BUSY_WAIT;
|
|
outw(BASE + VX_COMMAND, TX_RESET);
|
|
VX_BUSY_WAIT;
|
|
|
|
GO_WINDOW(1); /* Window 1 is operating window */
|
|
for (i = 0; i < 31; i++)
|
|
inb(BASE + VX_W1_TX_STATUS);
|
|
|
|
outw(BASE + VX_COMMAND,SET_RD_0_MASK | S_CARD_FAILURE |
|
|
S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL);
|
|
outw(BASE + VX_COMMAND,SET_INTR_MASK | S_CARD_FAILURE |
|
|
S_RX_COMPLETE | S_TX_COMPLETE | S_TX_AVAIL);
|
|
|
|
/*
|
|
* Attempt to get rid of any stray interrupts that occured during
|
|
* configuration. On the i386 this isn't possible because one may
|
|
* already be queued. However, a single stray interrupt is
|
|
* unimportant.
|
|
*/
|
|
outw(BASE + VX_COMMAND, ACK_INTR | 0xff);
|
|
|
|
vxsetfilter(sc);
|
|
vxsetlink(sc);
|
|
|
|
outw(BASE + VX_COMMAND, RX_ENABLE);
|
|
outw(BASE + VX_COMMAND, TX_ENABLE);
|
|
|
|
vxmbuffill((caddr_t) sc);
|
|
|
|
/* Interface is now `running', with no output active. */
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
/* Attempt to start output, if any. */
|
|
vxstart(ifp);
|
|
}
|
|
|
|
static void
|
|
vxsetfilter(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
register struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
|
|
GO_WINDOW(1); /* Window 1 is operating window */
|
|
outw(BASE + VX_COMMAND, SET_RX_FILTER | FIL_INDIVIDUAL | FIL_BRDCST |
|
|
FIL_MULTICAST |
|
|
((ifp->if_flags & IFF_PROMISC) ? FIL_PROMISC : 0 ));
|
|
}
|
|
|
|
static void
|
|
vxgetlink(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
int n, k;
|
|
|
|
GO_WINDOW(3);
|
|
sc->vx_connectors = inw(BASE + VX_W3_RESET_OPT) & 0x7f;
|
|
for (n = 0, k = 0; k < VX_CONNECTORS; k++) {
|
|
if (sc->vx_connectors & conn_tab[k].bit) {
|
|
if (n > 0) {
|
|
printf("/");
|
|
}
|
|
printf(conn_tab[k].name);
|
|
n++;
|
|
}
|
|
}
|
|
if (sc->vx_connectors == 0) {
|
|
printf("no connectors!");
|
|
return;
|
|
}
|
|
GO_WINDOW(3);
|
|
sc->vx_connector = (inl(BASE + VX_W3_INTERNAL_CFG)
|
|
& INTERNAL_CONNECTOR_MASK)
|
|
>> INTERNAL_CONNECTOR_BITS;
|
|
if (sc->vx_connector & 0x10) {
|
|
sc->vx_connector &= 0x0f;
|
|
printf("[*%s*]", conn_tab[sc->vx_connector].name);
|
|
printf(": disable 'auto select' with DOS util!", sc->unit);
|
|
} else {
|
|
printf("[*%s*]", conn_tab[sc->vx_connector].name);
|
|
}
|
|
}
|
|
|
|
static void
|
|
vxsetlink(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
register struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int i, j, k;
|
|
char *reason, *warning;
|
|
static short prev_flags;
|
|
static char prev_conn = -1;
|
|
|
|
if (prev_conn == -1) {
|
|
prev_conn = sc->vx_connector;
|
|
}
|
|
|
|
/*
|
|
* S.B.
|
|
*
|
|
* Now behavior was slightly changed:
|
|
*
|
|
* if any of flags link[0-2] is used and its connector is
|
|
* physically present the following connectors are used:
|
|
*
|
|
* link0 - AUI * highest precedence
|
|
* link1 - BNC
|
|
* link2 - UTP * lowest precedence
|
|
*
|
|
* If none of them is specified then
|
|
* connector specified in the EEPROM is used
|
|
* (if present on card or UTP if not).
|
|
*/
|
|
|
|
i = sc->vx_connector; /* default in EEPROM */
|
|
reason = "default";
|
|
warning = 0;
|
|
|
|
if (ifp->if_flags & IFF_LINK0) {
|
|
if (sc->vx_connectors & conn_tab[CONNECTOR_AUI].bit) {
|
|
i = CONNECTOR_AUI;
|
|
reason = "link0";
|
|
} else {
|
|
warning = "aui not present! (link0)";
|
|
}
|
|
} else if (ifp->if_flags & IFF_LINK1) {
|
|
if (sc->vx_connectors & conn_tab[CONNECTOR_BNC].bit) {
|
|
i = CONNECTOR_BNC;
|
|
reason = "link1";
|
|
} else {
|
|
warning = "bnc not present! (link1)";
|
|
}
|
|
} else if (ifp->if_flags & IFF_LINK2) {
|
|
if (sc->vx_connectors & conn_tab[CONNECTOR_UTP].bit) {
|
|
i = CONNECTOR_UTP;
|
|
reason = "link2";
|
|
} else {
|
|
warning = "utp not present! (link2)";
|
|
}
|
|
} else if ((sc->vx_connectors & conn_tab[sc->vx_connector].bit) == 0) {
|
|
warning = "strange connector type in EEPROM.";
|
|
reason = "forced";
|
|
i = CONNECTOR_UTP;
|
|
}
|
|
|
|
/* Avoid unnecessary message. */
|
|
k = (prev_flags ^ ifp->if_flags) & (IFF_LINK0 | IFF_LINK1 | IFF_LINK2);
|
|
if ((k != 0) || (prev_conn != i)) {
|
|
if (warning != 0) {
|
|
printf("vx%d: warning: %s\n", sc->unit, warning);
|
|
}
|
|
printf("vx%d: selected %s. (%s)\n",
|
|
sc->unit, conn_tab[i].name, reason);
|
|
}
|
|
|
|
/* Set the selected connector. */
|
|
GO_WINDOW(3);
|
|
j = inl(BASE + VX_W3_INTERNAL_CFG) & ~INTERNAL_CONNECTOR_MASK;
|
|
outl(BASE + VX_W3_INTERNAL_CFG, j | (i <<INTERNAL_CONNECTOR_BITS));
|
|
|
|
/* First, disable all. */
|
|
outw(BASE + VX_COMMAND, STOP_TRANSCEIVER);
|
|
DELAY(800);
|
|
GO_WINDOW(4);
|
|
outw(BASE + VX_W4_MEDIA_TYPE, 0);
|
|
|
|
/* Second, enable the selected one. */
|
|
switch(i) {
|
|
case CONNECTOR_UTP:
|
|
GO_WINDOW(4);
|
|
outw(BASE + VX_W4_MEDIA_TYPE, ENABLE_UTP);
|
|
break;
|
|
case CONNECTOR_BNC:
|
|
outw(BASE + VX_COMMAND, START_TRANSCEIVER);
|
|
DELAY(800);
|
|
break;
|
|
case CONNECTOR_TX:
|
|
case CONNECTOR_FX:
|
|
GO_WINDOW(4);
|
|
outw(BASE + VX_W4_MEDIA_TYPE, LINKBEAT_ENABLE);
|
|
break;
|
|
default: /* AUI and MII fall here */
|
|
break;
|
|
}
|
|
GO_WINDOW(1);
|
|
|
|
prev_flags = ifp->if_flags;
|
|
prev_conn = i;
|
|
}
|
|
|
|
static void
|
|
vxstart(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
register struct vx_softc *sc = vx_softc[ifp->if_unit];
|
|
register struct mbuf *m, *m0;
|
|
int sh, len, pad;
|
|
|
|
/* Don't transmit if interface is busy or not running */
|
|
if ((sc->arpcom.ac_if.if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
|
|
return;
|
|
|
|
startagain:
|
|
/* Sneak a peek at the next packet */
|
|
m0 = ifp->if_snd.ifq_head;
|
|
if (m0 == 0) {
|
|
return;
|
|
}
|
|
/* We need to use m->m_pkthdr.len, so require the header */
|
|
if ((m0->m_flags & M_PKTHDR) == 0)
|
|
panic("vxstart: no header mbuf");
|
|
len = m0->m_pkthdr.len;
|
|
|
|
pad = (4 - len) & 3;
|
|
|
|
/*
|
|
* The 3c509 automatically pads short packets to minimum ethernet length,
|
|
* but we drop packets that are too large. Perhaps we should truncate
|
|
* them instead?
|
|
*/
|
|
if (len + pad > ETHER_MAX_LEN) {
|
|
/* packet is obviously too large: toss it */
|
|
++ifp->if_oerrors;
|
|
IF_DEQUEUE(&ifp->if_snd, m0);
|
|
m_freem(m0);
|
|
goto readcheck;
|
|
}
|
|
VX_BUSY_WAIT;
|
|
if (inw(BASE + VX_W1_FREE_TX) < len + pad + 4) {
|
|
outw(BASE + VX_COMMAND, SET_TX_AVAIL_THRESH | ((len + pad + 4) >> 2));
|
|
/* not enough room in FIFO */
|
|
if (inw(BASE + VX_W1_FREE_TX) < len + pad + 4) { /* make sure */
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
ifp->if_timer = 1;
|
|
return;
|
|
}
|
|
}
|
|
outw(BASE + VX_COMMAND, SET_TX_AVAIL_THRESH | (8188 >> 2));
|
|
IF_DEQUEUE(&ifp->if_snd, m0);
|
|
if (m0 == 0) { /* not really needed */
|
|
return;
|
|
}
|
|
|
|
VX_BUSY_WAIT;
|
|
outw(BASE + VX_COMMAND, SET_TX_START_THRESH |
|
|
((len / 4 + sc->tx_start_thresh) >> 2));
|
|
|
|
#if NBPFILTER > 0
|
|
if (sc->arpcom.ac_if.if_bpf) {
|
|
bpf_mtap(&sc->arpcom.ac_if, m0);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Do the output at splhigh() so that an interrupt from another device
|
|
* won't cause a FIFO underrun.
|
|
*/
|
|
sh = splhigh();
|
|
|
|
outl(BASE + VX_W1_TX_PIO_WR_1, len | TX_INDICATE);
|
|
|
|
for (m = m0; m != 0;) {
|
|
if (m->m_len > 3)
|
|
outsl(BASE + VX_W1_TX_PIO_WR_1, mtod(m, caddr_t), m->m_len / 4);
|
|
if (m->m_len & 3)
|
|
outsb(BASE + VX_W1_TX_PIO_WR_1,
|
|
mtod(m, caddr_t) + (m->m_len & ~3) , m->m_len & 3);
|
|
MFREE(m, m0);
|
|
m = m0;
|
|
}
|
|
while (pad--)
|
|
outb(BASE + VX_W1_TX_PIO_WR_1, 0); /* Padding */
|
|
|
|
splx(sh);
|
|
|
|
++ifp->if_opackets;
|
|
ifp->if_timer = 1;
|
|
|
|
readcheck:
|
|
if ((inw(BASE + VX_W1_RX_STATUS) & ERR_INCOMPLETE) == 0) {
|
|
/* We received a complete packet. */
|
|
|
|
if ((inw(BASE + VX_STATUS) & S_INTR_LATCH) == 0) {
|
|
/*
|
|
* No interrupt, read the packet and continue
|
|
* Is this supposed to happen? Is my motherboard
|
|
* completely busted?
|
|
*/
|
|
vxread(sc);
|
|
} else
|
|
/* Got an interrupt, return so that it gets serviced. */
|
|
return;
|
|
} else {
|
|
/* Check if we are stuck and reset [see XXX comment] */
|
|
if (vxstatus(sc)) {
|
|
if (ifp->if_flags & IFF_DEBUG)
|
|
printf("vx%d: adapter reset\n", ifp->if_unit);
|
|
vxreset(sc);
|
|
}
|
|
}
|
|
|
|
goto startagain;
|
|
}
|
|
|
|
/*
|
|
* XXX: The 3c509 card can get in a mode where both the fifo status bit
|
|
* FIFOS_RX_OVERRUN and the status bit ERR_INCOMPLETE are set
|
|
* We detect this situation and we reset the adapter.
|
|
* It happens at times when there is a lot of broadcast traffic
|
|
* on the cable (once in a blue moon).
|
|
*/
|
|
static int
|
|
vxstatus(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
int fifost;
|
|
|
|
/*
|
|
* Check the FIFO status and act accordingly
|
|
*/
|
|
GO_WINDOW(4);
|
|
fifost = inw(BASE + VX_W4_FIFO_DIAG);
|
|
GO_WINDOW(1);
|
|
|
|
if (fifost & FIFOS_RX_UNDERRUN) {
|
|
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
|
|
printf("vx%d: RX underrun\n", sc->unit);
|
|
vxreset(sc);
|
|
return 0;
|
|
}
|
|
|
|
if (fifost & FIFOS_RX_STATUS_OVERRUN) {
|
|
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
|
|
printf("vx%d: RX Status overrun\n", sc->unit);
|
|
return 1;
|
|
}
|
|
|
|
if (fifost & FIFOS_RX_OVERRUN) {
|
|
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
|
|
printf("vx%d: RX overrun\n", sc->unit);
|
|
return 1;
|
|
}
|
|
|
|
if (fifost & FIFOS_TX_OVERRUN) {
|
|
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
|
|
printf("vx%d: TX overrun\n", sc->unit);
|
|
vxreset(sc);
|
|
return 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
vxtxstat(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
int i;
|
|
|
|
/*
|
|
* We need to read+write TX_STATUS until we get a 0 status
|
|
* in order to turn off the interrupt flag.
|
|
*/
|
|
while ((i = inb(BASE + VX_W1_TX_STATUS)) & TXS_COMPLETE) {
|
|
outb(BASE + VX_W1_TX_STATUS, 0x0);
|
|
|
|
if (i & TXS_JABBER) {
|
|
++sc->arpcom.ac_if.if_oerrors;
|
|
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
|
|
printf("vx%d: jabber (%x)\n", sc->unit, i);
|
|
vxreset(sc);
|
|
} else if (i & TXS_UNDERRUN) {
|
|
++sc->arpcom.ac_if.if_oerrors;
|
|
if (sc->arpcom.ac_if.if_flags & IFF_DEBUG)
|
|
printf("vx%d: fifo underrun (%x) @%d\n",
|
|
sc->unit, i, sc->tx_start_thresh);
|
|
if (sc->tx_succ_ok < 100)
|
|
sc->tx_start_thresh = min(ETHER_MAX_LEN, sc->tx_start_thresh + 20);
|
|
sc->tx_succ_ok = 0;
|
|
vxreset(sc);
|
|
} else if (i & TXS_MAX_COLLISION) {
|
|
++sc->arpcom.ac_if.if_collisions;
|
|
outw(BASE + VX_COMMAND, TX_ENABLE);
|
|
sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
|
|
} else
|
|
sc->tx_succ_ok = (sc->tx_succ_ok+1) & 127;
|
|
}
|
|
}
|
|
|
|
void
|
|
vxintr(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
register short status;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
|
|
for (;;) {
|
|
outw(BASE + VX_COMMAND, C_INTR_LATCH);
|
|
|
|
status = inw(BASE + VX_STATUS);
|
|
|
|
if ((status & (S_TX_COMPLETE | S_TX_AVAIL |
|
|
S_RX_COMPLETE | S_CARD_FAILURE)) == 0)
|
|
break;
|
|
|
|
/*
|
|
* Acknowledge any interrupts. It's important that we do this
|
|
* first, since there would otherwise be a race condition.
|
|
* Due to the i386 interrupt queueing, we may get spurious
|
|
* interrupts occasionally.
|
|
*/
|
|
outw(BASE + VX_COMMAND, ACK_INTR | status);
|
|
|
|
if (status & S_RX_COMPLETE)
|
|
vxread(sc);
|
|
if (status & S_TX_AVAIL) {
|
|
ifp->if_timer = 0;
|
|
sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
|
|
vxstart(&sc->arpcom.ac_if);
|
|
}
|
|
if (status & S_CARD_FAILURE) {
|
|
printf("vx%d: adapter failure (%x)\n", sc->unit, status);
|
|
ifp->if_timer = 0;
|
|
vxreset(sc);
|
|
return;
|
|
}
|
|
if (status & S_TX_COMPLETE) {
|
|
ifp->if_timer = 0;
|
|
vxtxstat(sc);
|
|
vxstart(ifp);
|
|
}
|
|
}
|
|
|
|
/* no more interrupts */
|
|
return;
|
|
}
|
|
|
|
static void
|
|
vxread(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
struct mbuf *m;
|
|
struct ether_header *eh;
|
|
u_int len;
|
|
|
|
len = inw(BASE + VX_W1_RX_STATUS);
|
|
|
|
again:
|
|
|
|
if (ifp->if_flags & IFF_DEBUG) {
|
|
int err = len & ERR_MASK;
|
|
char *s = NULL;
|
|
|
|
if (len & ERR_INCOMPLETE)
|
|
s = "incomplete packet";
|
|
else if (err == ERR_OVERRUN)
|
|
s = "packet overrun";
|
|
else if (err == ERR_RUNT)
|
|
s = "runt packet";
|
|
else if (err == ERR_ALIGNMENT)
|
|
s = "bad alignment";
|
|
else if (err == ERR_CRC)
|
|
s = "bad crc";
|
|
else if (err == ERR_OVERSIZE)
|
|
s = "oversized packet";
|
|
else if (err == ERR_DRIBBLE)
|
|
s = "dribble bits";
|
|
|
|
if (s)
|
|
printf("vx%d: %s\n", sc->unit, s);
|
|
}
|
|
|
|
if (len & ERR_INCOMPLETE)
|
|
return;
|
|
|
|
if (len & ERR_RX) {
|
|
++ifp->if_ierrors;
|
|
goto abort;
|
|
}
|
|
|
|
len &= RX_BYTES_MASK; /* Lower 11 bits = RX bytes. */
|
|
|
|
/* Pull packet off interface. */
|
|
m = vxget(sc, len);
|
|
if (m == 0) {
|
|
ifp->if_ierrors++;
|
|
goto abort;
|
|
}
|
|
|
|
++ifp->if_ipackets;
|
|
|
|
/* We assume the header fit entirely in one mbuf. */
|
|
eh = mtod(m, struct ether_header *);
|
|
|
|
#if NBPFILTER > 0
|
|
/*
|
|
* Check if there's a BPF listener on this interface.
|
|
* If so, hand off the raw packet to BPF.
|
|
*/
|
|
if (sc->arpcom.ac_if.if_bpf) {
|
|
bpf_mtap(&sc->arpcom.ac_if, m);
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* XXX: Some cards seem to be in promiscous mode all the time.
|
|
* we need to make sure we only get our own stuff always.
|
|
* bleah!
|
|
*/
|
|
|
|
if ((eh->ether_dhost[0] & 1) == 0 && /* !mcast and !bcast */
|
|
bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
|
|
sizeof(eh->ether_dhost)) != 0) {
|
|
m_freem(m);
|
|
return;
|
|
}
|
|
/* We assume the header fit entirely in one mbuf. */
|
|
m_adj(m, sizeof(struct ether_header));
|
|
ether_input(ifp, eh, m);
|
|
|
|
/*
|
|
* In periods of high traffic we can actually receive enough
|
|
* packets so that the fifo overrun bit will be set at this point,
|
|
* even though we just read a packet. In this case we
|
|
* are not going to receive any more interrupts. We check for
|
|
* this condition and read again until the fifo is not full.
|
|
* We could simplify this test by not using vxstatus(), but
|
|
* rechecking the RX_STATUS register directly. This test could
|
|
* result in unnecessary looping in cases where there is a new
|
|
* packet but the fifo is not full, but it will not fix the
|
|
* stuck behavior.
|
|
*
|
|
* Even with this improvement, we still get packet overrun errors
|
|
* which are hurting performance. Maybe when I get some more time
|
|
* I'll modify vxread() so that it can handle RX_EARLY interrupts.
|
|
*/
|
|
if (vxstatus(sc)) {
|
|
len = inw(BASE + VX_W1_RX_STATUS);
|
|
/* Check if we are stuck and reset [see XXX comment] */
|
|
if (len & ERR_INCOMPLETE) {
|
|
if (ifp->if_flags & IFF_DEBUG)
|
|
printf("vx%d: adapter reset\n", sc->unit);
|
|
vxreset(sc);
|
|
return;
|
|
}
|
|
goto again;
|
|
}
|
|
|
|
return;
|
|
|
|
abort:
|
|
outw(BASE + VX_COMMAND, RX_DISCARD_TOP_PACK);
|
|
}
|
|
|
|
static struct mbuf *
|
|
vxget(sc, totlen)
|
|
struct vx_softc *sc;
|
|
u_int totlen;
|
|
{
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
struct mbuf *top, **mp, *m;
|
|
int len;
|
|
int sh;
|
|
|
|
m = sc->mb[sc->next_mb];
|
|
sc->mb[sc->next_mb] = 0;
|
|
if (m == 0) {
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m == 0)
|
|
return 0;
|
|
} else {
|
|
/* If the queue is no longer full, refill. */
|
|
if (sc->last_mb == sc->next_mb && sc->buffill_pending == 0) {
|
|
sc->ch = timeout(vxmbuffill, sc, 1);
|
|
sc->buffill_pending = 1;
|
|
}
|
|
/* Convert one of our saved mbuf's. */
|
|
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
|
|
m->m_data = m->m_pktdat;
|
|
m->m_flags = M_PKTHDR;
|
|
}
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = totlen;
|
|
len = MHLEN;
|
|
top = 0;
|
|
mp = ⊤
|
|
|
|
/*
|
|
* We read the packet at splhigh() so that an interrupt from another
|
|
* device doesn't cause the card's buffer to overflow while we're
|
|
* reading it. We may still lose packets at other times.
|
|
*/
|
|
sh = splhigh();
|
|
|
|
/*
|
|
* Since we don't set allowLargePackets bit in MacControl register,
|
|
* we can assume that totlen <= 1500bytes.
|
|
* The while loop will be performed iff we have a packet with
|
|
* MLEN < m_len < MINCLSIZE.
|
|
*/
|
|
while (totlen > 0) {
|
|
if (top) {
|
|
m = sc->mb[sc->next_mb];
|
|
sc->mb[sc->next_mb] = 0;
|
|
if (m == 0) {
|
|
MGET(m, M_DONTWAIT, MT_DATA);
|
|
if (m == 0) {
|
|
splx(sh);
|
|
m_freem(top);
|
|
return 0;
|
|
}
|
|
} else {
|
|
sc->next_mb = (sc->next_mb + 1) % MAX_MBS;
|
|
}
|
|
len = MLEN;
|
|
}
|
|
if (totlen >= MINCLSIZE) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if (m->m_flags & M_EXT)
|
|
len = MCLBYTES;
|
|
}
|
|
len = min(totlen, len);
|
|
if (len > 3)
|
|
insl(BASE + VX_W1_RX_PIO_RD_1, mtod(m, u_int32_t *), len / 4);
|
|
if (len & 3) {
|
|
insb(BASE + VX_W1_RX_PIO_RD_1, mtod(m, u_int8_t *) + (len & ~3),
|
|
len & 3);
|
|
}
|
|
m->m_len = len;
|
|
totlen -= len;
|
|
*mp = m;
|
|
mp = &m->m_next;
|
|
}
|
|
|
|
outw(BASE +VX_COMMAND, RX_DISCARD_TOP_PACK);
|
|
|
|
splx(sh);
|
|
|
|
return top;
|
|
}
|
|
|
|
|
|
static int
|
|
vxioctl(ifp, cmd, data)
|
|
register struct ifnet *ifp;
|
|
int cmd;
|
|
caddr_t data;
|
|
{
|
|
struct vx_softc *sc = vx_softc[ifp->if_unit];
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
int s, error = 0;
|
|
|
|
s = splimp();
|
|
|
|
switch (cmd) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
ether_ioctl(ifp, cmd, data);
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
if ((ifp->if_flags & IFF_UP) == 0 &&
|
|
(ifp->if_flags & IFF_RUNNING) != 0) {
|
|
/*
|
|
* If interface is marked up and it is stopped, then
|
|
* start it.
|
|
*/
|
|
vxstop(sc);
|
|
ifp->if_flags &= ~IFF_RUNNING;
|
|
} else if ((ifp->if_flags & IFF_UP) != 0 &&
|
|
(ifp->if_flags & IFF_RUNNING) == 0) {
|
|
/*
|
|
* If interface is marked up and it is stopped, then
|
|
* start it.
|
|
*/
|
|
vxinit(sc);
|
|
} else {
|
|
/*
|
|
* deal with flags changes:
|
|
* IFF_MULTICAST, IFF_PROMISC,
|
|
* IFF_LINK0, IFF_LINK1,
|
|
*/
|
|
vxsetfilter(sc);
|
|
vxsetlink(sc);
|
|
}
|
|
break;
|
|
|
|
case SIOCSIFMTU:
|
|
/*
|
|
* Set the interface MTU.
|
|
*/
|
|
if (ifr->ifr_mtu > ETHERMTU) {
|
|
error = EINVAL;
|
|
} else {
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
}
|
|
break;
|
|
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
/*
|
|
* Multicast list has changed; set the hardware filter
|
|
* accordingly.
|
|
*/
|
|
vxreset(sc);
|
|
error = 0;
|
|
break;
|
|
|
|
|
|
default:
|
|
error = EINVAL;
|
|
}
|
|
|
|
splx(s);
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
vxreset(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
int s;
|
|
s = splimp();
|
|
|
|
vxstop(sc);
|
|
vxinit(sc);
|
|
splx(s);
|
|
}
|
|
|
|
static void
|
|
vxwatchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct vx_softc *sc = vx_softc[ifp->if_unit];
|
|
|
|
if (ifp->if_flags & IFF_DEBUG)
|
|
printf("vx%d: device timeout\n", ifp->if_unit);
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
vxstart(ifp);
|
|
vxintr(sc);
|
|
}
|
|
|
|
void
|
|
vxstop(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
|
|
ifp->if_timer = 0;
|
|
|
|
outw(BASE + VX_COMMAND, RX_DISABLE);
|
|
outw(BASE + VX_COMMAND, RX_DISCARD_TOP_PACK);
|
|
VX_BUSY_WAIT;
|
|
outw(BASE + VX_COMMAND, TX_DISABLE);
|
|
outw(BASE + VX_COMMAND, STOP_TRANSCEIVER);
|
|
DELAY(800);
|
|
outw(BASE + VX_COMMAND, RX_RESET);
|
|
VX_BUSY_WAIT;
|
|
outw(BASE + VX_COMMAND, TX_RESET);
|
|
VX_BUSY_WAIT;
|
|
outw(BASE + VX_COMMAND, C_INTR_LATCH);
|
|
outw(BASE + VX_COMMAND, SET_RD_0_MASK);
|
|
outw(BASE + VX_COMMAND, SET_INTR_MASK);
|
|
outw(BASE + VX_COMMAND, SET_RX_FILTER);
|
|
|
|
vxmbufempty(sc);
|
|
}
|
|
|
|
int
|
|
vxbusyeeprom(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
int j, i = 100;
|
|
|
|
while (i--) {
|
|
j = inw(BASE + VX_W0_EEPROM_COMMAND);
|
|
if (j & EEPROM_BUSY)
|
|
DELAY(100);
|
|
else
|
|
break;
|
|
}
|
|
if (!i) {
|
|
printf("vx%d: eeprom failed to come ready\n", sc->unit);
|
|
return (1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
vxmbuffill(sp)
|
|
void *sp;
|
|
{
|
|
struct vx_softc *sc = (struct vx_softc *) sp;
|
|
int s, i;
|
|
|
|
s = splimp();
|
|
i = sc->last_mb;
|
|
do {
|
|
if (sc->mb[i] == NULL)
|
|
MGET(sc->mb[i], M_DONTWAIT, MT_DATA);
|
|
if (sc->mb[i] == NULL)
|
|
break;
|
|
i = (i + 1) % MAX_MBS;
|
|
} while (i != sc->next_mb);
|
|
sc->last_mb = i;
|
|
/* If the queue was not filled, try again. */
|
|
if (sc->last_mb != sc->next_mb) {
|
|
sc->ch = timeout(vxmbuffill, sc, 1);
|
|
sc->buffill_pending = 1;
|
|
} else {
|
|
sc->buffill_pending = 0;
|
|
}
|
|
splx(s);
|
|
}
|
|
|
|
static void
|
|
vxmbufempty(sc)
|
|
struct vx_softc *sc;
|
|
{
|
|
int s, i;
|
|
|
|
s = splimp();
|
|
for (i = 0; i < MAX_MBS; i++) {
|
|
if (sc->mb[i]) {
|
|
m_freem(sc->mb[i]);
|
|
sc->mb[i] = NULL;
|
|
}
|
|
}
|
|
sc->last_mb = sc->next_mb = 0;
|
|
if (sc->buffill_pending != 0)
|
|
untimeout(vxmbuffill, sc, sc->ch);
|
|
splx(s);
|
|
}
|
|
|
|
#endif /* NVX > 0 */
|