1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-22 11:17:19 +00:00
Mirror of the FreeBSD src repository https://git.FreeBSD.org/src.git .
Go to file
Navdeep Parhar c88fa71928 cxgbe(4): Update T4, T5 and T6 firmwares to 1.16.26.0. Changelog for
all public firmwares for all chips since the last release (1.15.37.0)
follows (it's a straight copy-paste from the Release Notes for the
12/30/2016 Unified Wire release on Chelsio's website).

T6 Firmware
++++++++++++

Version : 1.16.26.0
Date    : 12/28/2016

Fixes
-----

BASE:
- Max number of egress and control queues adjusted to accomodate
  co-processor mode queues.
- Fixed intermittent DDR3/4 ECC errors.
- Fixed a traffic stall when ETS BW is configured as 0%.
- Max number of ethctrl queue in VF set to 1.

ETH:
- Added a new config file option 'speed' under port section to set the
  port speed.  Use only when auto negotiation is off.
- FEC option removed from firmware config file. cxgbtool can be used to
  change the fec setting.
- CPL_TX_TNL_LSO cpl handling added in ETH_TX_PKT_VM handler. This fixes
  large tunnel tcp packet support for VxLAN.

Version : 1.16.22.0
Date    : 12/05/2016

Fixes
-----

BASE:
- fw_port_type updated in fw API to match kernel.org definitions.
- Saved power by disaling unused MAC lanes.
- Configures correct power bin.
- Enhanced DDR4 performance.
- Enabled interrupts.
- Fixed an issue where filter rule for 'unicast hash' is not working.

ETH:
- Disabled auto negotiation by default because most of 100G switches do
  not support AN as of today.
- Fixed flow control not getting disabled problem.
- Fixed an issue where port0 doesn't come up sometimes.
- Fixed 10G link not coming up issue.
- Fixed an issue with promiscuous mode when dcbx disabled.

OFLD:
- Fixed a connection stuck issue when abort is received during out of tx
  pages backpressure.

ENHANCEMENTS
------------

BASE:
- Added inline TLS mode support.

Version : 1.16.12.0
Date    : 11/11/2016

ENHANCEMENTS
------------

BASE:
- Added T6 support.
- Added T6 1G/10G/25G/40G/100G link speeds.
- Added T6 co-processor mode crypto support.
- Added facility to increase link AN+AEC timeout.

OFLD:
- Added support for all T5 offload protocols except FCoE.

iSCSI:
- iscsi completion moderation enabled.

=======================================================================

T5 Firmware
++++++++++++

Version : 1.16.26.0
Date    : 12/28/2016

FIXES
-----

BASE:
- Max number of ethctrl queue in VF set to 1.

Version : 1.16.22.0
Date    : 12/05/2016

FIXES
-----

BASE:
- Fixed an issue where filter rule for 'unicast hash' is not working.

ETH:
- Fixed an issue with promiscuous mode when dcbx disabled.

ENHANCEMENTS
------------

ETH:
- Added 40G-KR support.

Version : 1.16.12.0
Date    : 11/11/2016

FIXES
-----

BASE:
- Fixed multiple issues related with VFs FLR processing.
- Fixed channel assignment based on number of ports in adapter.
- Fixed a crash when VM having PF assigned as passthrough mode is
  rebooted.
- Handled 2nd HELLO command from the same PF without seeing BYE from the
  same PF and if that is the only PF.
- A warning is printed in firmware log if PCI-E cookie generation is
  enabled in serial initialization file.
- Fixed multiple issues related with Filtering.
- Enabled DSGL memory write for iscsi and rdma.
- Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration
  and VPD version numbers.
- Fixed an issue where LVDS output was not getting enabled using vpd.

DCBX:
- Fixed DCBX CEE Incorrect class to pririty mapping.
- Fixed incorrect interpretation of DCBX IEEE PFC.

ETH:
- Adjusted the link related delay timings according to the QSFP spec.
- Improved 40G link bringup time with few switches.

OFLD:
- Do not reserve qp/cq if rdma capability is not enabled.
- Fixed an issue where approx 1600+ TOE connections were causing a
  firmware fatal error.

FOiSCSI:
- Fixed an issue where unloading foiscsi driver causes mailbox timeout.

ENHANCEMENTS
------------

BASE:
- Added 10G KR/KX support.
- Added T540-BT adapter support.
- Added 4 new rss key modes for PFs and VFs.

OFLD:
- Added new WR FW_RI_FR_NSMR_TPTE_WR to improve fast MR write
  performance in RDMA.

Version : 1.16.5.0
Date    : 10/26/2016

FIXES
-----

BASE:
- Fixed multiple issues where FLR from multiple VFs can cause firmware
  crash.
- Fixed channel assignment based on number of ports in adapter.
- Fixed the HELLO command master force api to handle the 2nd HELLO
  correctly without getting BYE from the PF driver.
- Added facility to retrieve Serial configuration and VPD version. Two
  new FW_PARAMS_CMD[DEV] options added to retrieve these values.
- Fixed multiple issues where FLR from multiple VFs are not completing.
- Added new RSS hash secret key modes.
- Fixed an issue where LVDS output was not getting enabled using vpd.

DCBX:
- Fixed an issue where iscsi tlv is sent incorrectly to host (DCBX CEE).
- Fixed an issue where app priority values are not handled correctly
  in fw (DCBX IEEE).

ETH:
- Adjusts the link related delay timings according to the QSFP spec.
- Changed 2.5G mac speed bit to 25G mac speed bit in fw API.
- Improvement in 40G link bringup time with few switches.

OFLD:
- Do not reserve qp/cq if rdma capability is not enabled.
- Fixed an issue where approx 1600+ TOE connections were causing a
  firmware fatal error.
- Fixed DSGL memory write in T5. Now iwarp and iscsi can use DSGL to do
  memory write.
- Fixed multiple issues in hash filter mode where incorrect protocol
  mask was getting used and affecting hash filter functionality.
- New fastpath WR FW_RI_FR_NSMR_TPTE_WR (with fully populated TPTE) is
  added for small REG_MR operations.

FOiSCSI:
- Fixed an issue in foiscsi recovery path.
- Fixed an issue where foiscsi (in VM in PCIE passthrough mode) didn't
  come up after VM FLR.

ENHANCEMENTS
------------

ETH:
- Implemented 1G/10G KR/KX ability.
- Implemented T540-BT adapter support.

=======================================================================

T4 Firmware
+++++++++++

Version : 1.16.12.0
Date    : 11/11/2016

FIXES
-----

BASE:
- Fixed an issue where reading temperature sesors using ldst command
  causes mailbox timeout.
- Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration
  and VPD version numbers.

ETH:
- Fixed DCBX CEE Incorrect class to pririty mapping.

FOiSCSI:
- Fixed an issue where unloading foiscsi driver causes mailbox timeout.

MFC after:	3 days
Sponsored by:	Chelsio Communications
2017-01-03 22:05:07 +00:00
bin pax(1): Fix a bug with archives smaller than 512 bytes. 2016-12-21 15:26:59 +00:00
cddl Convert ipv4_flags and ipv4_offset fields into host byte order. 2016-12-29 20:27:54 +00:00
contrib Fix spelling errors; bump .Dd for the change 2017-01-01 05:23:01 +00:00
crypto MFV r308196: 2016-11-02 06:49:25 +00:00
etc Update ntp.conf to use the ntpd pool feature. 2017-01-02 15:19:22 +00:00
gnu Add WITH_LLD_AS_LD build knob 2016-11-25 13:15:28 +00:00
include Remove some uses of the GCC __nonnull() attribute. 2017-01-01 17:16:47 +00:00
kerberos5 Conditionalize adding ${KRB5DIR}/lib/gssapi/krb5/gkrb5_err.et to ETSRCS 2017-01-02 19:03:01 +00:00
lib Update libsysdecode for getfsstat() 'flags' argument changing to 'mode'. 2017-01-03 01:39:05 +00:00
libexec Don't use high precision clock for expiration as only second portion is 2016-12-26 17:23:09 +00:00
release Revert r309339, thus re-instating r309314 2016-12-16 23:05:47 +00:00
rescue DIRDEPS_BUILD: Update dependencies. 2016-11-13 00:11:30 +00:00
sbin sysctl(8): fix typename for uint32_t. 2016-12-31 12:39:15 +00:00
secure Only bake krb5_config.h support in to ssh(3), etc if both MK_GSSAPI and 2017-01-02 20:29:50 +00:00
share Fix typo 2017-01-03 21:11:30 +00:00
sys cxgbe(4): Update T4, T5 and T6 firmwares to 1.16.26.0. Changelog for 2017-01-03 22:05:07 +00:00
targets Merge ^/head r308491 through r308841. 2016-11-19 16:05:55 +00:00
tests Bump WARNS to 6 to catch simple QA issues like some of the ones I squashed 2017-01-01 04:02:06 +00:00
tools Add WITH_SSP to silence complaints from mkman about there not being a file 2017-01-02 20:09:09 +00:00
usr.bin Update libsysdecode for getfsstat() 'flags' argument changing to 'mode'. 2017-01-03 01:39:05 +00:00
usr.sbin Fix up grammar. 2017-01-01 10:37:10 +00:00
.arcconfig callsign isn't required anymore 2016-09-29 06:19:45 +00:00
.arclint
COPYRIGHT Bump copyright year. 2016-12-31 12:41:42 +00:00
LOCKS
MAINTAINERS
Makefile Add full softfloat and hardfloat support for RISC-V. 2016-11-16 15:21:32 +00:00
Makefile.inc1 Only bake krb5_config.h support in to ssh(3), etc if both MK_GSSAPI and 2017-01-02 20:29:50 +00:00
Makefile.libcompat Fix build of lib32 libraries for amd64 and powerpc64 with cross toolchain 2016-12-25 15:39:52 +00:00
ObsoleteFiles.inc Update libsysdecode for getfsstat() 'flags' argument changing to 'mode'. 2017-01-03 01:39:05 +00:00
README
UPDATING Put a tentative import date in ObsoleteFiles.inc and UPDATING. 2016-12-17 18:35:17 +00:00

This is the top level of the FreeBSD source directory.  This file
was last revised on:
$FreeBSD$

For copyright information, please see the file COPYRIGHT in this
directory (additional copyright information also exists for some
sources in this tree - please see the specific source directories for
more information).

The Makefile in this directory supports a number of targets for
building components (or all) of the FreeBSD source tree.  See build(7)
and http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
for more information, including setting make(1) variables.

The `buildkernel` and `installkernel` targets build and install
the kernel and the modules (see below).  Please see the top of
the Makefile in this directory for more information on the
standard build targets and compile-time flags.

Building a kernel is a somewhat more involved process.  See build(7), config(8),
and http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
for more information.

Note: If you want to build and install the kernel with the
`buildkernel` and `installkernel` targets, you might need to build
world before.  More information is available in the handbook.

The kernel configuration files reside in the sys/<arch>/conf
sub-directory.  GENERIC is the default configuration used in release builds.
NOTES contains entries and documentation for all possible
devices, not just those commonly used.


Source Roadmap:
---------------

bin		System/user commands.

cddl		Various commands and libraries under the Common Development
		and Distribution License.

contrib		Packages contributed by 3rd parties.

crypto		Cryptography stuff (see crypto/README).

etc		Template files for /etc.

gnu		Various commands and libraries under the GNU Public License.
		Please see gnu/COPYING* for more information.

include		System include files.

kerberos5	Kerberos5 (Heimdal) package.

lib		System libraries.

libexec		System daemons.

release		Release building Makefile & associated tools.

rescue		Build system for statically linked /rescue utilities.

sbin		System commands.

secure		Cryptographic libraries and commands.

share		Shared resources.

sys		Kernel sources.

tests		Regression tests which can be run by Kyua.  See tests/README
		for additional information.

tools		Utilities for regression testing and miscellaneous tasks.

usr.bin		User commands.

usr.sbin	System administration commands.


For information on synchronizing your source tree with one or more of
the FreeBSD Project's development branches, please see:

  http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html