mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-20 11:11:24 +00:00
c5595f9dd0
53C810 non 'A', 53C815 and 53C825 non 'A' are now attached by the driver (by default). The driver uses a different SCRIPTS set based on MEMORY MOVE instructions for these chips. 2 SCRIPTS sets (firmwares) numbered #1 and #2 are used for the whole support of the 53C8XX family to get possible: - FW #1 : Only based on MEMORY MOVE instructions. Selected for 810, 815, 825. - FW #2 : LOAD/STORE based. This is the firmware also used by previous driver versions. Selected for other chips. When both `ncr' and `sym' are configured, `sym' will now attach all the 53C8XX devices by default. Previous balancing between `ncr' and `sym' can be preserved by: - Either editing sym_conf.h and commenting the following compile option: #define SYM_CONF_GENERIC_SUPPORT (This also saves about 3.5Kb of kernel memory). - Or setting kernel config option SYM_SETUP_LP_PROBE_MAP to 64 (bit 0x40)
209 lines
7.3 KiB
C
209 lines
7.3 KiB
C
/*
|
|
* Device driver optimized for the Symbios/LSI 53C896/53C895A/53C1010
|
|
* PCI-SCSI controllers.
|
|
*
|
|
* Copyright (C) 1999-2000 Gerard Roudier <groudier@club-internet.fr>
|
|
*
|
|
* This driver also supports the following Symbios/LSI PCI-SCSI chips:
|
|
* 53C810A, 53C825A, 53C860, 53C875, 53C876, 53C885, 53C895,
|
|
* 53C810, 53C815, 53C825 and the 53C1510D is 53C8XX mode.
|
|
*
|
|
*
|
|
* This driver for FreeBSD-CAM is derived from the Linux sym53c8xx driver.
|
|
* Copyright (C) 1998-1999 Gerard Roudier
|
|
*
|
|
* The sym53c8xx driver is derived from the ncr53c8xx driver that had been
|
|
* a port of the FreeBSD ncr driver to Linux-1.2.13.
|
|
*
|
|
* The original ncr driver has been written for 386bsd and FreeBSD by
|
|
* Wolfgang Stanglmeier <wolf@cologne.de>
|
|
* Stefan Esser <se@mi.Uni-Koeln.de>
|
|
* Copyright (C) 1994 Wolfgang Stanglmeier
|
|
*
|
|
* The initialisation code, and part of the code that addresses
|
|
* FreeBSD-CAM services is based on the aic7xxx driver for FreeBSD-CAM
|
|
* written by Justin T. Gibbs.
|
|
*
|
|
* Other major contributions:
|
|
*
|
|
* NVRAM detection and reading.
|
|
* Copyright (C) 1997 Richard Waltham <dormouse@farsrobt.demon.co.uk>
|
|
*
|
|
*-----------------------------------------------------------------------------
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
/* $FreeBSD$ */
|
|
|
|
#ifndef SYM_FW_H
|
|
#define SYM_FW_H
|
|
/*
|
|
* Macro used to generate interfaces for script A.
|
|
*/
|
|
#define SYM_GEN_FW_A(s) \
|
|
SYM_GEN_A(s, start) SYM_GEN_A(s, getjob_begin) \
|
|
SYM_GEN_A(s, getjob_end) \
|
|
SYM_GEN_A(s, select) SYM_GEN_A(s, wf_sel_done) \
|
|
SYM_GEN_A(s, send_ident) \
|
|
SYM_GEN_A(s, dispatch) SYM_GEN_A(s, init) \
|
|
SYM_GEN_A(s, clrack) SYM_GEN_A(s, complete_error) \
|
|
SYM_GEN_A(s, done) SYM_GEN_A(s, done_end) \
|
|
SYM_GEN_A(s, idle) SYM_GEN_A(s, ungetjob) \
|
|
SYM_GEN_A(s, reselect) \
|
|
SYM_GEN_A(s, resel_tag) SYM_GEN_A(s, resel_dsa) \
|
|
SYM_GEN_A(s, resel_no_tag) \
|
|
SYM_GEN_A(s, data_in) SYM_GEN_A(s, data_in2) \
|
|
SYM_GEN_A(s, data_out) SYM_GEN_A(s, data_out2) \
|
|
SYM_GEN_A(s, pm0_data) SYM_GEN_A(s, pm1_data)
|
|
|
|
/*
|
|
* Macro used to generate interfaces for script B.
|
|
*/
|
|
#define SYM_GEN_FW_B(s) \
|
|
SYM_GEN_B(s, no_data) \
|
|
SYM_GEN_B(s, sel_for_abort) SYM_GEN_B(s, sel_for_abort_1) \
|
|
SYM_GEN_B(s, msg_bad) SYM_GEN_B(s, msg_weird) \
|
|
SYM_GEN_B(s, wdtr_resp) SYM_GEN_B(s, send_wdtr) \
|
|
SYM_GEN_B(s, sdtr_resp) SYM_GEN_B(s, send_sdtr) \
|
|
SYM_GEN_B(s, ppr_resp) SYM_GEN_B(s, send_ppr) \
|
|
SYM_GEN_B(s, nego_bad_phase) \
|
|
SYM_GEN_B(s, ident_break) SYM_GEN_B(s, ident_break_atn) \
|
|
SYM_GEN_B(s, sdata_in) SYM_GEN_B(s, resel_bad_lun) \
|
|
SYM_GEN_B(s, bad_i_t_l) SYM_GEN_B(s, bad_i_t_l_q) \
|
|
SYM_GEN_B(s, wsr_ma_helper) \
|
|
SYM_GEN_B(s, snooptest) SYM_GEN_B(s, snoopend)
|
|
|
|
/*
|
|
* Generates structure interface that contains
|
|
* offsets within script A and script B.
|
|
*/
|
|
#define SYM_GEN_A(s, label) s label;
|
|
#define SYM_GEN_B(s, label) s label;
|
|
struct sym_fwa_ofs {
|
|
SYM_GEN_FW_A(u_short)
|
|
};
|
|
struct sym_fwb_ofs {
|
|
SYM_GEN_FW_B(u_short)
|
|
SYM_GEN_B(u_short, start64);
|
|
SYM_GEN_B(u_short, pm_handle);
|
|
};
|
|
|
|
/*
|
|
* Generates structure interface that contains
|
|
* bus addresses within script A and script B.
|
|
*/
|
|
struct sym_fwa_ba {
|
|
SYM_GEN_FW_A(u32)
|
|
};
|
|
struct sym_fwb_ba {
|
|
SYM_GEN_FW_B(u32)
|
|
SYM_GEN_B(u32, start64);
|
|
SYM_GEN_B(u32, pm_handle);
|
|
};
|
|
#undef SYM_GEN_A
|
|
#undef SYM_GEN_B
|
|
|
|
/*
|
|
* Let cc know about the name of the controller data structure.
|
|
* We need this for function prototype declarations just below.
|
|
*/
|
|
struct sym_hcb;
|
|
|
|
/*
|
|
* Generic structure that defines a firmware.
|
|
*/
|
|
struct sym_fw {
|
|
char *name; /* Name we want to print out */
|
|
u32 *a_base; /* Pointer to script A template */
|
|
int a_size; /* Size of script A */
|
|
struct sym_fwa_ofs
|
|
*a_ofs; /* Useful offsets in script A */
|
|
u32 *b_base; /* Pointer to script B template */
|
|
int b_size; /* Size of script B */
|
|
struct sym_fwb_ofs
|
|
*b_ofs; /* Useful offsets in script B */
|
|
/* Setup and patch methods for this firmware */
|
|
void (*setup)(struct sym_hcb *, struct sym_fw *);
|
|
void (*patch)(struct sym_hcb *);
|
|
};
|
|
|
|
/*
|
|
* Macro used to declare a firmware.
|
|
*/
|
|
#define SYM_FW_ENTRY(fw, name) \
|
|
{ \
|
|
name, \
|
|
(u32 *) &fw##a_scr, sizeof(fw##a_scr), &fw##a_ofs, \
|
|
(u32 *) &fw##b_scr, sizeof(fw##b_scr), &fw##b_ofs, \
|
|
fw##_setup, fw##_patch \
|
|
}
|
|
|
|
/*
|
|
* Macros used from the C code to get useful
|
|
* SCRIPTS bus addresses.
|
|
*/
|
|
#define SCRIPTA_BA(np, label) (np->fwa_bas.label)
|
|
#define SCRIPTB_BA(np, label) (np->fwb_bas.label)
|
|
#define SCRIPTB0_BA(np,label) \
|
|
(np->scriptb0_ba + (np->fwb_bas.label - np->scriptb_ba))
|
|
|
|
/*
|
|
* Macros used by scripts definitions.
|
|
*
|
|
* HADDR_1 generates a reference to a field of the controller data.
|
|
* HADDR_2 generates a reference to a field of the controller data
|
|
* with offset.
|
|
* RADDR_1 generates a reference to a script processor register.
|
|
* RADDR_2 generates a reference to a script processor register
|
|
* with offset.
|
|
* PADDR_A generates a reference to another part of script A.
|
|
* PADDR_B generates a reference to another part of script B.
|
|
*
|
|
* SYM_GEN_PADDR_A and SYM_GEN_PADDR_B are used to define respectively
|
|
* the PADDR_A and PADDR_B macros for each firmware by setting argument
|
|
* `s' to the name of the corresponding structure.
|
|
*
|
|
* SCR_DATA_ZERO is used to allocate a DWORD of data in scripts areas.
|
|
*/
|
|
|
|
#define RELOC_SOFTC 0x40000000
|
|
#define RELOC_LABEL_A 0x50000000
|
|
#define RELOC_REGISTER 0x60000000
|
|
#define RELOC_LABEL_B 0x80000000
|
|
#define RELOC_MASK 0xf0000000
|
|
|
|
#define HADDR_1(label) (RELOC_SOFTC | offsetof(struct sym_hcb, label))
|
|
#define HADDR_2(label,ofs) (RELOC_SOFTC | \
|
|
(offsetof(struct sym_hcb, label)+(ofs)))
|
|
#define RADDR_1(label) (RELOC_REGISTER | REG(label))
|
|
#define RADDR_2(label,ofs) (RELOC_REGISTER | ((REG(label))+(ofs)))
|
|
|
|
#define SYM_GEN_PADDR_A(s, label) (RELOC_LABEL_A | offsetof(s, label))
|
|
#define SYM_GEN_PADDR_B(s, label) (RELOC_LABEL_B | offsetof(s, label))
|
|
|
|
#define SCR_DATA_ZERO 0xf00ff00f
|
|
|
|
#endif /* SYM_FW_H */
|