1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-27 11:55:06 +00:00
freebsd/sys/mips/rmi/board.c
Jayachandran C. 70b0d39bbc Add support for XLS 108 chips - update board.c/board.h to setup GMAC
driver parameters correctly.

Approved by:	rrs (mentor)
Obtained from:	Sriram Gorti <srgorti@netlogicmicro.com>
2010-07-02 13:30:26 +00:00

199 lines
7.4 KiB
C

/*********************************************************************
*
* Copyright 2003-2006 Raza Microelectronics, Inc. (RMI). All rights
* reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY Raza Microelectronics, Inc. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL RMI OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES, LOSS OF USE, DATA, OR PROFITS, OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*
* *****************************RMI_2**********************************/
#include <sys/cdefs.h> /* RCS ID & Copyright macro defns */
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <machine/cpufunc.h>
#include <mips/rmi/msgring.h>
#include <mips/rmi/board.h>
#include <mips/rmi/pic.h>
#include <mips/rmi/shared_structs.h>
static int xlr_rxstn_to_txstn_map[128] = {
[0 ... 7] = TX_STN_CPU_0,
[8 ... 15] = TX_STN_CPU_1,
[16 ... 23] = TX_STN_CPU_2,
[24 ... 31] = TX_STN_CPU_3,
[32 ... 39] = TX_STN_CPU_4,
[40 ... 47] = TX_STN_CPU_5,
[48 ... 55] = TX_STN_CPU_6,
[56 ... 63] = TX_STN_CPU_7,
[64 ... 95] = TX_STN_INVALID,
[96 ... 103] = TX_STN_GMAC,
[104 ... 107] = TX_STN_DMA,
[108 ... 111] = TX_STN_INVALID,
[112 ... 113] = TX_STN_XGS_0,
[114 ... 115] = TX_STN_XGS_1,
[116 ... 119] = TX_STN_INVALID,
[120 ... 127] = TX_STN_SAE
};
static int xls_rxstn_to_txstn_map[128] = {
[0 ... 7] = TX_STN_CPU_0,
[8 ... 15] = TX_STN_CPU_1,
[16 ... 23] = TX_STN_CPU_2,
[24 ... 31] = TX_STN_CPU_3,
[32 ... 63] = TX_STN_INVALID,
[64 ... 71] = TX_STN_PCIE,
[72 ... 79] = TX_STN_INVALID,
[80 ... 87] = TX_STN_GMAC1,
[88 ... 95] = TX_STN_INVALID,
[96 ... 103] = TX_STN_GMAC0,
[104 ... 107] = TX_STN_DMA,
[108 ... 111] = TX_STN_CDE,
[112 ... 119] = TX_STN_INVALID,
[120 ... 127] = TX_STN_SAE
};
struct stn_cc *xlr_core_cc_configs[] = {&cc_table_cpu_0, &cc_table_cpu_1,
&cc_table_cpu_2, &cc_table_cpu_3,
&cc_table_cpu_4, &cc_table_cpu_5,
&cc_table_cpu_6, &cc_table_cpu_7};
struct stn_cc *xls_core_cc_configs[] = {&xls_cc_table_cpu_0, &xls_cc_table_cpu_1,
&xls_cc_table_cpu_2, &xls_cc_table_cpu_3};
struct xlr_board_info xlr_board_info;
/*
* All our knowledge of chip and board that cannot be detected by probing
* at run-time goes here
*/
int
xlr_board_info_setup()
{
if (xlr_is_xls()) {
xlr_board_info.is_xls = 1;
xlr_board_info.nr_cpus = 8;
xlr_board_info.usb = 1;
/* Board version 8 has NAND flash */
xlr_board_info.cfi =
(xlr_boot1_info.board_major_version != RMI_XLR_BOARD_ARIZONA_VIII);
xlr_board_info.pci_irq = 0;
xlr_board_info.credit_configs = xls_core_cc_configs;
xlr_board_info.bucket_sizes = &xls_bucket_sizes;
xlr_board_info.msgmap = xls_rxstn_to_txstn_map;
xlr_board_info.gmacports = 8;
/* network block 0 */
xlr_board_info.gmac_block[0].type = XLR_GMAC;
xlr_board_info.gmac_block[0].enabled = 0xf;
xlr_board_info.gmac_block[0].credit_config = &xls_cc_table_gmac0;
xlr_board_info.gmac_block[0].station_txbase = MSGRNG_STNID_GMACTX0;
xlr_board_info.gmac_block[0].station_rfr = MSGRNG_STNID_GMACRFR_0;
if (xlr_boot1_info.board_major_version == RMI_XLR_BOARD_ARIZONA_VI ||
xlr_boot1_info.board_major_version == RMI_XLR_BOARD_ARIZONA_XI ||
xlr_boot1_info.board_major_version == RMI_XLR_BOARD_ARIZONA_XII)
xlr_board_info.gmac_block[0].mode = XLR_PORT0_RGMII;
else
xlr_board_info.gmac_block[0].mode = XLR_SGMII;
xlr_board_info.gmac_block[0].baseaddr = XLR_IO_GMAC_0_OFFSET;
xlr_board_info.gmac_block[0].baseirq = PIC_GMAC_0_IRQ;
xlr_board_info.gmac_block[0].baseinst = 0;
/* network block 1 */
xlr_board_info.gmac_block[1].type = XLR_GMAC;
xlr_board_info.gmac_block[1].enabled = xlr_is_xls1xx() ? 0 : 0xf;
if (xlr_is_xls4xx_lite()) {
xlr_reg_t *mmio = xlr_io_mmio(XLR_IO_GPIO_OFFSET);
uint32_t tmp;
/* some ports are not enabled on the condor 4xx, figure this
out from the GPIO fuse bank */
tmp = xlr_read_reg(mmio, 35);
if (tmp & (1<<28))
xlr_board_info.gmac_block[1].enabled &= ~0x8;
if (tmp & (1<<29))
xlr_board_info.gmac_block[1].enabled &= ~0x4;
}
xlr_board_info.gmac_block[1].credit_config = &xls_cc_table_gmac1;
xlr_board_info.gmac_block[1].station_txbase = MSGRNG_STNID_GMAC1_TX0;
xlr_board_info.gmac_block[1].station_rfr = MSGRNG_STNID_GMAC1_FR_0;
xlr_board_info.gmac_block[1].mode = XLR_SGMII;
xlr_board_info.gmac_block[1].baseaddr = XLR_IO_GMAC_4_OFFSET;
xlr_board_info.gmac_block[1].baseirq = PIC_XGS_0_IRQ;
xlr_board_info.gmac_block[1].baseinst = 4;
/* network block 2 */
xlr_board_info.gmac_block[2].enabled = 0; /* disabled on XLS */
} else {
xlr_board_info.is_xls = 0;
xlr_board_info.nr_cpus = 32;
xlr_board_info.usb = 0;
xlr_board_info.cfi = 1;
xlr_board_info.pci_irq = 0;
xlr_board_info.credit_configs = xlr_core_cc_configs;
xlr_board_info.bucket_sizes = &bucket_sizes;
xlr_board_info.msgmap = xlr_rxstn_to_txstn_map;
xlr_board_info.gmacports = 4;
/* GMAC0 */
xlr_board_info.gmac_block[0].type = XLR_GMAC;
xlr_board_info.gmac_block[0].enabled = 0xf;
xlr_board_info.gmac_block[0].credit_config = &cc_table_gmac;
xlr_board_info.gmac_block[0].station_txbase = MSGRNG_STNID_GMACTX0;
xlr_board_info.gmac_block[0].station_rfr = MSGRNG_STNID_GMACRFR_0;
xlr_board_info.gmac_block[0].mode = XLR_RGMII;
xlr_board_info.gmac_block[0].baseaddr = XLR_IO_GMAC_0_OFFSET;
xlr_board_info.gmac_block[0].baseirq = PIC_GMAC_0_IRQ;
xlr_board_info.gmac_block[0].baseinst = 0;
/* XGMAC0 */
xlr_board_info.gmac_block[1].type = XLR_XGMAC;
xlr_board_info.gmac_block[1].enabled = 1;
xlr_board_info.gmac_block[1].credit_config = &cc_table_xgs_0;
xlr_board_info.gmac_block[1].station_txbase = MSGRNG_STNID_XGS0_TX;
xlr_board_info.gmac_block[1].station_rfr = MSGRNG_STNID_XGS0FR;
xlr_board_info.gmac_block[1].mode = -1;
xlr_board_info.gmac_block[1].baseaddr = XLR_IO_XGMAC_0_OFFSET;
xlr_board_info.gmac_block[1].baseirq = PIC_XGS_0_IRQ;
xlr_board_info.gmac_block[1].baseinst = 4;
/* XGMAC1 */
xlr_board_info.gmac_block[2].type = XLR_XGMAC;
xlr_board_info.gmac_block[2].enabled = 1;
xlr_board_info.gmac_block[2].credit_config = &cc_table_xgs_1;
xlr_board_info.gmac_block[2].station_txbase = MSGRNG_STNID_XGS1_TX;
xlr_board_info.gmac_block[2].station_rfr = MSGRNG_STNID_XGS1FR;
xlr_board_info.gmac_block[2].mode = -1;
xlr_board_info.gmac_block[2].baseaddr = XLR_IO_XGMAC_1_OFFSET;
xlr_board_info.gmac_block[2].baseirq = PIC_XGS_1_IRQ;
xlr_board_info.gmac_block[2].baseinst = 5;
}
return 0;
}