freebsd/sys/arm/at91/ohci_atmelarm.c

/*-
 * Copyright (c) 2006 M. Warner Losh.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/queue.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>

#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdivar.h>
#include <dev/usb/usb_mem.h>

#include <dev/usb/ohcireg.h>
#include <dev/usb/ohcivar.h>

#include <arm/at91/at91_pmcvar.h>

#define MEM_RID	0

static int ohci_atmelarm_attach(device_t dev);
static int ohci_atmelarm_detach(device_t dev);

struct at91_ohci_softc
{
	struct ohci_softc sc_ohci;
	struct at91_pmc_clock *iclk;
	struct at91_pmc_clock *fclk;
};

static int
ohci_atmelarm_probe(device_t dev)
{
	device_set_desc(dev, "AT91 integrated ohci controller");
	return (BUS_PROBE_DEFAULT);
}

static int
ohci_atmelarm_attach(device_t dev)
{
	struct at91_ohci_softc *sc = device_get_softc(dev);
	int err;
	int rid;

	
	sc->iclk = at91_pmc_clock_ref("ohci_clk");
	sc->fclk = at91_pmc_clock_ref("uhpck");

	rid = MEM_RID;
	sc->sc_ohci.io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
	    RF_ACTIVE);
	if (sc->sc_ohci.io_res == NULL) {
		err = ENOMEM;
		goto error;
	}
	sc->sc_ohci.iot = rman_get_bustag(sc->sc_ohci.io_res);
	sc->sc_ohci.ioh = rman_get_bushandle(sc->sc_ohci.io_res);

	rid = 0;
	sc->sc_ohci.irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
	    RF_ACTIVE);
	if (sc->sc_ohci.irq_res == NULL) {
		err = ENOMEM;
		goto error;
	}
	sc->sc_ohci.sc_bus.bdev = device_add_child(dev, "usb", -1);
	if (sc->sc_ohci.sc_bus.bdev == NULL) {
		err = ENOMEM;
		goto error;
	}
	device_set_ivars(sc->sc_ohci.sc_bus.bdev, &sc->sc_ohci.sc_bus);

	err = bus_setup_intr(dev, sc->sc_ohci.irq_res, INTR_TYPE_BIO, NULL, 
	    ohci_intr, sc, &sc->sc_ohci.ih);
	if (err) {
		err = ENXIO;
		goto error;
	}
	strlcpy(sc->sc_ohci.sc_vendor, "Atmel", sizeof(sc->sc_ohci.sc_vendor));

	/*
	 * turn on the clocks from the AT91's point of view.  Keep the unit in reset.
	 */
//	bus_space_write_4(sc->sc_ohci.iot, sc->sc_ohci.ioh, OHCI_CONTROL, 0);
	at91_pmc_clock_enable(sc->iclk);
	at91_pmc_clock_enable(sc->fclk);
	bus_space_write_4(sc->sc_ohci.iot, sc->sc_ohci.ioh, OHCI_CONTROL, 0);

	err = ohci_init(&sc->sc_ohci);
	if (!err) {
		sc->sc_ohci.sc_flags |= OHCI_SCFLG_DONEINIT;
		err = device_probe_and_attach(sc->sc_ohci.sc_bus.bdev);
	}

error:;
	if (err) {
		ohci_atmelarm_detach(dev);
		return (err);
	}
	return (err);
}

static int
ohci_atmelarm_detach(device_t dev)
{
	struct at91_ohci_softc *sc = device_get_softc(dev);

	if (sc->sc_ohci.sc_flags & OHCI_SCFLG_DONEINIT) {
		ohci_detach(&sc->sc_ohci, 0);
		sc->sc_ohci.sc_flags &= ~OHCI_SCFLG_DONEINIT;
	}

	/*
	 * Put the controller into reset, then disable clocks and do
	 * the MI tear down.  We have to disable the clocks/hardware
	 * after we do the rest of the teardown.  We also disable the
	 * clocks in the opposite order we acquire them, but that
	 * doesn't seem to be absolutely necessary.  We free up the
	 * clocks after we disable them, so the system could, in
	 * theory, reuse them.
	 */
	bus_space_write_4(sc->sc_ohci.iot, sc->sc_ohci.ioh, OHCI_CONTROL, 0);
	at91_pmc_clock_disable(sc->fclk);
	at91_pmc_clock_disable(sc->iclk);
	at91_pmc_clock_deref(sc->fclk);
	at91_pmc_clock_deref(sc->iclk);

	if (sc->sc_ohci.ih) {
		bus_teardown_intr(dev, sc->sc_ohci.irq_res, sc->sc_ohci.ih);
		sc->sc_ohci.ih = NULL;
	}
	if (sc->sc_ohci.sc_bus.bdev) {
		device_delete_child(dev, sc->sc_ohci.sc_bus.bdev);
		sc->sc_ohci.sc_bus.bdev = NULL;
	}
	if (sc->sc_ohci.irq_res) {
		bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_ohci.irq_res);
		sc->sc_ohci.irq_res = NULL;
	}
	if (sc->sc_ohci.io_res) {
		bus_release_resource(dev, SYS_RES_MEMORY, MEM_RID, sc->sc_ohci.io_res);
		sc->sc_ohci.io_res = NULL;
		sc->sc_ohci.iot = 0;
		sc->sc_ohci.ioh = 0;
	}
	return (0);
}

static device_method_t ohci_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe, ohci_atmelarm_probe),
	DEVMETHOD(device_attach, ohci_atmelarm_attach),
	DEVMETHOD(device_detach, ohci_atmelarm_detach),
	DEVMETHOD(device_shutdown, bus_generic_shutdown),

	/* Bus interface */
	DEVMETHOD(bus_print_child, bus_generic_print_child),

	{0, 0}
};

static driver_t ohci_driver = {
	"ohci",
	ohci_methods,
	sizeof(struct at91_ohci_softc),
};

static devclass_t ohci_devclass;

DRIVER_MODULE(ohci, atmelarm, ohci_driver, ohci_devclass, 0, 0);