mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-15 10:17:20 +00:00
ae1f3df434
only gpiobus configured via FDT is supported. Bus enumeration is supported. Devices are created for each device found. 1-Wire temperature controllers are supported, but other drivers could be written. Temperatures are polled and reported via a sysctl. Errors are reported via sysctl counters. Mis-wired bus detection is included for more trouble shooting. See ow(4), owc(4) and ow_temp(4) for details of what's supported and known issues. This has been tested on Raspberry Pi-B, Pi2 and Beagle Bone Black with up to 7 devices. Differential Revision: https://reviews.freebsd.org/D2956 Relnotes: yes MFC after: 2 weeks Reviewed by: loos@ (with many insightful comments)
159 lines
5.9 KiB
Objective-C
159 lines
5.9 KiB
Objective-C
#-
|
|
# Copyright (c) 2015 M. Warner Losh <imp@freebsd.org>
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
# ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
# SUCH DAMAGE.
|
|
#
|
|
# $FreeBSD$
|
|
#
|
|
|
|
#include <sys/bus.h>
|
|
#include <dev/ow/owll.h>
|
|
|
|
INTERFACE owll;
|
|
|
|
#
|
|
# Dallas Semiconductor 1-Wire bus Link Layer (owll)
|
|
#
|
|
# See Maxim Application Note AN937: Book of iButton Standards for the
|
|
# 1-Wire protocol specification.
|
|
# http://pdfserv.maximintegrated.com/en/an/AN937.pdf
|
|
#
|
|
# Note: 1-Wire is a registered trademark of Maxim Integrated Products, Inc.
|
|
#
|
|
# This file provides an interface to the logical layer of the protocol.
|
|
# Although the first implementation is done with GPIO bit banging, some
|
|
# SoCs have a 1-Wire controller with more smarts or hardware offload.
|
|
# Maxim datasheets also describe how to use UARTs to generate timing,
|
|
# as well as both usb and i2c 1-Wire controllers.
|
|
#
|
|
# Chapter 4 has all the electrical timing diagrams that make up the link
|
|
# layer of this protocol.
|
|
#
|
|
# Two speed classes are defined: Regular speed and Overdrive speed.
|
|
# It is the responsibility of a device implementing the owll(9) interface
|
|
# to ensure that the timings are met:
|
|
#
|
|
# Regular Overdrive
|
|
#
|
|
# 60us <= tSLOT < 120us 6us <= tSLOT <= 16us
|
|
# 60us <= tLOW0 < tSLOT < 120us 6us <= tLOW0 < tSLOT < 16us
|
|
# 1us <= tLOW1 < 15us 1us <= tLOW < 2us
|
|
# 1us < tLOWR < 15us 1us <= tLOWR < 2us
|
|
# 0 <= tRELEASE < 45us 0 <= tRELEASE < 4us
|
|
# 1us <= tREC < inf 1us <= tREC < inf
|
|
# tRDV = 15us tRDV = 2us
|
|
# 480us <= tRSTL < inf 48us <= tRSTL < 80us
|
|
# 480us <= tRSTH < inf 48us <= tRSTH < inf
|
|
# 15us < tPDH < 60us 2us <= tPDH < 6us
|
|
# 60us < tPDL < 240us 8us <= tPDL < 24us
|
|
#
|
|
# In the diagrams below, R is driven by the resistor pullup, M is driven by
|
|
# the master, and S is driven by the slave / target.
|
|
#
|
|
# All of these methods are expected to be called from the "network"/bus layer
|
|
# for doing its operations. See 1wn_if.m for those.
|
|
#
|
|
# Note: This is the polling / busy-wait interface. An interrupt-based interface
|
|
# may be different. But an interrupt-based, non-blocking interface can be tricky.
|
|
#
|
|
# Only the owbus should talk to this interface.
|
|
#
|
|
|
|
# WRITE-ONE (see above for timings) From Figure 4-1 AN-937
|
|
#
|
|
# |<---------tSLOT---->|<-tREC->|
|
|
# High RRRRM | RRRRRRRRRRRR|RRRRRRRRM
|
|
# M | R | | | M
|
|
# M| R | | | M
|
|
# Low MMMMMMM | | | MMMMMM...
|
|
# |<-tLOW1->| | |
|
|
# |<------15us--->| |
|
|
# |<--------60us---->|
|
|
#
|
|
#
|
|
METHOD int write_one {
|
|
device_t lldev; /* Link Level device (eg bridge) */
|
|
struct ow_timing *timing; /* timing values */
|
|
};
|
|
|
|
|
|
# WRITE-ZERO (see above for timings) From Figure 4-2 AN-937
|
|
#
|
|
# |<---------tSLOT------>|<-tREC->|
|
|
# High RRRRM | | |RRRRRRRM
|
|
# M | | R M
|
|
# M| | | |R M
|
|
# Low MMMMMMMMMMMMMMMMMMMMMR MMMMMM...
|
|
# |<--15us->| | |
|
|
# |<------60us--->| |
|
|
# |<-------tLOW0------>|
|
|
#
|
|
#
|
|
METHOD int write_zero {
|
|
device_t lldev; /* Link Level device (eg bridge) */
|
|
struct ow_timing *timing; /* timing values */
|
|
};
|
|
|
|
# READ-DATA (see above for timings) From Figure 4-3 AN-937
|
|
#
|
|
# |<---------tSLOT------>|<-tREC->|
|
|
# High RRRRM | rrrrrrrrrrrrrrrRRRRRRRM
|
|
# M | r | R M
|
|
# M| r | |R M
|
|
# Low MMMMMMMSSSSSSSSSSSSSSR MMMMMM...
|
|
# |<tLOWR>< sample > |
|
|
# |<------tRDV---->| |
|
|
# ->| |<-tRELEASE
|
|
#
|
|
# r -- allowed to pull high via the resistor when slave writes a 1-bit
|
|
#
|
|
METHOD int read_data {
|
|
device_t lldev; /* Link Level device (eg bridge) */
|
|
struct ow_timing *timing; /* timing values */
|
|
int *bit; /* Bit we sampled */
|
|
};
|
|
|
|
# RESET AND PRESENCE PULSE (see above for timings) From Figure 4-4 AN-937
|
|
#
|
|
# |<---------tRSTH------------>|
|
|
# High RRRM | | RRRRRRRS | RRRR RRM
|
|
# M | |R| |S | R M
|
|
# M| R | | S |R M
|
|
# Low MMMMMMMM MMMMMM| | | SSSSSSSSSS MMMMMM
|
|
# |<----tRSTL--->| | |<-tPDL---->|
|
|
# | ->| |<-tR | |
|
|
# |<tPDH>|
|
|
#
|
|
# Note: for Regular Speed operations, tRSTL + tR should be less than 960us to
|
|
# avoid interfering with other devives on the bus.
|
|
#
|
|
# Returns errors associating with acquiring the bus, or EIO to indicate
|
|
# that the bus was low during the RRRR time where it should have been
|
|
# pulled high. The present field is always updated, even on error.
|
|
#
|
|
METHOD int reset_and_presence {
|
|
device_t lldev; /* Link level device (eg bridge) */
|
|
struct ow_timing *timing; /* timing values */
|
|
int *present; /* 0 = slave 1 = no slave -1 = bus error */
|
|
};
|