1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-18 10:35:55 +00:00
freebsd/sys/vm/swap_pager.c
Matthew Dillon 9f6fed9017 The default_pager's interaction with the swap_pager has been reorganized,
and the swap_pager has been completely replaced.

    The new swap pager uses the new blist radix-tree based bitmap allocator
    for low level swap allocation and deallocation.   The new allocator
    is effectively O(5) while the old one was O(N), and the new allocator
    allocates all required memory at init time rather then at allocate
    memory on the fly at run time.

    Swap metadata is allocated in clusters and stored in a hash table,
    eliminating linearly allocated structures.

    Many, many features have been rewritten or added.  Swap space is now
    reallocated on the fly providing a poor-mans auto defragmentation of
    swap space.  Swap space that is no longer needed is freed on a timely
    basis so no garbage collection is necessary.

    Swap I/O is marked B_ASYNC and NFS has been fixed to do the right
    thing with it, so NFS-based paging now has around 10x the performance
    as it did before ( previously NFS enforced synchronous I/O for paging ).
1999-01-21 09:33:07 +00:00

1731 lines
42 KiB
C

/*
* Copyright (c) 1998 Matthew Dillon,
* Copyright (c) 1994 John S. Dyson
* Copyright (c) 1990 University of Utah.
* Copyright (c) 1991, 1993
* The Regents of the University of California. All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* the Systems Programming Group of the University of Utah Computer
* Science Department.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* New Swap System
* Matthew Dillon
*
* Radix Bitmap 'blists'.
*
* - The new swapper uses the new radix bitmap code. This should scale
* to arbitrarily small or arbitrarily large swap spaces and an almost
* arbitrary degree of fragmentation.
*
* Features:
*
* - on the fly reallocation of swap during putpages. The new system
* does not try to keep previously allocated swap blocks for dirty
* pages.
*
* - on the fly deallocation of swap
*
* - No more garbage collection required. Unnecessarily allocated swap
* blocks only exist for dirty vm_page_t's now and these are already
* cycled (in a high-load system) by the pager. We also do on-the-fly
* removal of invalidated swap blocks when a page is destroyed
* or renamed.
*
* from: Utah $Hdr: swap_pager.c 1.4 91/04/30$
*
* @(#)swap_pager.c 8.9 (Berkeley) 3/21/94
*
* $Id: swap_pager.c,v 1.108 1999/01/21 08:29:09 dillon Exp $
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/buf.h>
#include <sys/vnode.h>
#include <sys/malloc.h>
#include <sys/vmmeter.h>
#include <sys/blist.h>
#include <sys/lock.h>
#ifndef MAX_PAGEOUT_CLUSTER
#define MAX_PAGEOUT_CLUSTER 16
#endif
#define SWB_NPAGES MAX_PAGEOUT_CLUSTER
#include "opt_swap.h"
#include <vm/vm.h>
#include <vm/vm_prot.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <vm/vm_pager.h>
#include <vm/vm_pageout.h>
#include <vm/swap_pager.h>
#include <vm/vm_extern.h>
#include <vm/vm_zone.h>
#define SWM_FREE 0x02 /* free, period */
#define SWM_POP 0x04 /* pop out */
/*
* vm_swap_size is in page-sized chunks now. It was DEV_BSIZE'd chunks
* in the old system.
*/
extern int vm_swap_size; /* number of free swap blocks, in pages */
int swap_pager_full; /* swap space exhaustion (w/ hysteresis)*/
static int nsw_rcount; /* free read buffers */
static int nsw_wcount; /* free write buffers */
static int nsw_hysteresis; /* hysteresis */
static int max_pageout_cluster; /* maximum VOP I/O allowed */
static int sw_alloc_interlock; /* swap pager allocation interlock */
struct blist *swapblist;
static struct swblock **swhash;
static int swhash_mask;
/*
* "named" and "unnamed" anon region objects. Try to reduce the overhead
* of searching a named list by hashing it just a little.
*/
#define NOBJLISTS 8
#define NOBJLIST(handle) \
(&swap_pager_object_list[((int)(long)handle >> 4) & (NOBJLISTS-1)])
static struct pagerlst swap_pager_object_list[NOBJLISTS];
struct pagerlst swap_pager_un_object_list;
vm_zone_t swap_zone;
/*
* pagerops for OBJT_SWAP - "swap pager". Some ops are also global procedure
* calls hooked from other parts of the VM system and do not appear here.
* (see vm/swap_pager.h).
*/
static vm_object_t
swap_pager_alloc __P((void *handle, vm_ooffset_t size,
vm_prot_t prot, vm_ooffset_t offset));
static void swap_pager_dealloc __P((vm_object_t object));
static int swap_pager_getpages __P((vm_object_t, vm_page_t *, int, int));
static void swap_pager_init __P((void));
static void swap_pager_unswapped __P((vm_page_t));
struct pagerops swappagerops = {
swap_pager_init, /* early system initialization of pager */
swap_pager_alloc, /* allocate an OBJT_SWAP object */
swap_pager_dealloc, /* deallocate an OBJT_SWAP object */
swap_pager_getpages, /* pagein */
swap_pager_putpages, /* pageout */
swap_pager_haspage, /* get backing store status for page */
swap_pager_unswapped /* remove swap related to page */
};
/*
* dmmax is in page-sized chunks with the new swap system. It was
* dev-bsized chunks in the old.
*
* swap_*() routines are externally accessible. swp_*() routines are
* internal.
*/
int dmmax;
static int dmmax_mask;
int nswap_lowat = 128; /* in pages, swap_pager_full warning */
int nswap_hiwat = 256; /* in pages, swap_pager_full warning */
static __inline void swp_sizecheck __P((void));
static void swp_pager_sync_iodone __P((struct buf *bp));
static void swp_pager_async_iodone __P((struct buf *bp));
/*
* Swap bitmap functions
*/
static __inline void swp_pager_freeswapspace __P((daddr_t blk, int npages));
static __inline daddr_t swp_pager_getswapspace __P((int npages));
/*
* Metadata functions
*/
static void swp_pager_meta_build __P((vm_object_t, daddr_t, daddr_t, int));
static void swp_pager_meta_free __P((vm_object_t, daddr_t, daddr_t));
static void swp_pager_meta_free_all __P((vm_object_t));
static daddr_t swp_pager_meta_ctl __P((vm_object_t, vm_pindex_t, int));
/*
* SWP_SIZECHECK() - update swap_pager_full indication
*
* update the swap_pager_full indication and warn when we are
* about to run out of swap space.
*
* No restrictions on call
* This routine may not block.
* This routine must be called at splvm()
*/
static __inline void
swp_sizecheck()
{
if (vm_swap_size < nswap_lowat) {
if (swap_pager_full == 0)
printf("swap_pager: out of swap space\n");
swap_pager_full = 1;
} else if (vm_swap_size > nswap_hiwat) {
swap_pager_full = 0;
}
}
/*
* SWAP_PAGER_INIT() - initialize the swap pager!
*
* Expected to be started from system init. NOTE: This code is run
* before much else so be careful what you depend on. Most of the VM
* system has yet to be initialized at this point.
*/
static void
swap_pager_init()
{
/*
* Initialize object lists
*/
int i;
for (i = 0; i < NOBJLISTS; ++i)
TAILQ_INIT(&swap_pager_object_list[i]);
TAILQ_INIT(&swap_pager_un_object_list);
/*
* Device Stripe, in PAGE_SIZE'd blocks
*/
dmmax = SWB_NPAGES * 2;
dmmax_mask = ~(dmmax - 1);
}
/*
* SWAP_PAGER_SWAP_INIT() - swap pager initialization from pageout process
*
* Expected to be started from pageout process once, prior to entering
* its main loop.
*/
void
swap_pager_swap_init()
{
int n;
/*
* Number of in-transit swap bp operations. Don't
* exhaust the pbufs completely. Make sure we
* initialize workable values (0 will work for hysteresis
* but it isn't very efficient).
*
* The max_pageout_cluster is constrained by the bp->b_pages[]
* array (MAXPHYS/PAGE_SIZE) and our locally defined
* MAX_PAGEOUT_CLUSTER. Also be aware that swap ops are
* constrained by the swap device interleave stripe size.
*/
nsw_rcount = (nswbuf + 1) / 2;
nsw_wcount = (nswbuf + 3) / 4;
nsw_hysteresis = nsw_wcount / 2;
max_pageout_cluster = min((MAXPHYS/PAGE_SIZE), MAX_PAGEOUT_CLUSTER);
/*
* Initialize our zone. Right now I'm just guessing on the number
* we need based on the number of pages in the system. Each swblock
* can hold 16 pages, so this is probably overkill.
*/
n = cnt.v_page_count * 2;
swap_zone = zinit(
"SWAPMETA",
sizeof(struct swblock),
n,
ZONE_INTERRUPT,
1
);
/*
* Initialize our meta-data hash table. The swapper does not need to
* be quite as efficient as the VM system, so we do not use an
* oversized hash table.
*
* n: size of hash table, must be power of 2
* swhash_mask: hash table index mask
*/
for (n = 1; n < cnt.v_page_count / 4; n <<= 1)
;
swhash = malloc(sizeof(struct swblock *) * n, M_VMPGDATA, M_WAITOK);
bzero(swhash, sizeof(struct swblock *) * n);
swhash_mask = n - 1;
}
/*
* SWAP_PAGER_ALLOC() - allocate a new OBJT_SWAP VM object and instantiate
* its metadata structures.
*
* This routine is called from the mmap and fork code to create a new
* OBJT_SWAP object. We do this by creating an OBJT_DEFAULT object
* and then converting it with swp_pager_meta_build().
*
* This routine may block in vm_object_allocate() and create a named
* object lookup race, so we must interlock. We must also run at
* splvm() for the object lookup to handle races with interrupts, but
* we do not have to maintain splvm() in between the lookup and the
* add because (I believe) it is not possible to attempt to create
* a new swap object w/handle when a default object with that handle
* already exists.
*/
static vm_object_t
swap_pager_alloc(void *handle, vm_ooffset_t size, vm_prot_t prot,
vm_ooffset_t offset)
{
vm_object_t object;
if (handle) {
/*
* Reference existing named region or allocate new one. There
* should not be a race here against swp_pager_meta_build()
* as called from vm_page_remove() in regards to the lookup
* of the handle.
*/
while (sw_alloc_interlock) {
sw_alloc_interlock = -1;
tsleep(&sw_alloc_interlock, PVM, "swpalc", 0);
}
sw_alloc_interlock = 1;
object = vm_pager_object_lookup(NOBJLIST(handle), handle);
if (object != NULL) {
vm_object_reference(object);
} else {
object = vm_object_allocate(OBJT_DEFAULT,
OFF_TO_IDX(offset + PAGE_MASK + size));
object->handle = handle;
swp_pager_meta_build(
object,
0,
SWAPBLK_NONE,
0
);
}
if (sw_alloc_interlock < 0)
wakeup(&sw_alloc_interlock);
sw_alloc_interlock = 0;
} else {
object = vm_object_allocate(OBJT_DEFAULT,
OFF_TO_IDX(offset + PAGE_MASK + size));
swp_pager_meta_build(
object,
0,
SWAPBLK_NONE,
0
);
}
return (object);
}
/*
* SWAP_PAGER_DEALLOC() - remove swap metadata from object
*
* The swap backing for the object is destroyed. The code is
* designed such that we can reinstantiate it later, but this
* routine is typically called only when the entire object is
* about to be destroyed.
*
* This routine may block, but no longer does.
*
* The object must be locked or unreferenceable.
*/
static void
swap_pager_dealloc(object)
vm_object_t object;
{
/*
* Remove from list right away so lookups will fail if we block for
* pageout completion.
*/
if (object->handle == NULL) {
TAILQ_REMOVE(&swap_pager_un_object_list, object, pager_object_list);
} else {
TAILQ_REMOVE(NOBJLIST(object->handle), object, pager_object_list);
}
vm_object_pip_wait(object, "swpdea");
/*
* Free all remaining metadata. We only bother to free it from
* the swap meta data. We do not attempt to free swapblk's still
* associated with vm_page_t's for this object. We do not care
* if paging is still in progress on some objects.
*/
swp_pager_meta_free_all(object);
}
/************************************************************************
* SWAP PAGER BITMAP ROUTINES *
************************************************************************/
/*
* SWP_PAGER_GETSWAPSPACE() - allocate raw swap space
*
* Allocate swap for the requested number of pages. The starting
* swap block number (a page index) is returned or SWAPBLK_NONE
* if the allocation failed.
*
* Also has the side effect of advising that somebody made a mistake
* when they configured swap and didn't configure enough.
*
* Must be called at splvm() to avoid races with bitmap frees from
* vm_page_remove() aka swap_pager_page_removed().
*
* This routine may not block
* This routine must be called at splvm().
*/
static __inline daddr_t
swp_pager_getswapspace(npages)
int npages;
{
daddr_t blk;
if ((blk = blist_alloc(swapblist, npages)) == SWAPBLK_NONE) {
printf("swap_pager_getswapspace: failed\n");
} else {
vm_swap_size -= npages;
swp_sizecheck();
}
return(blk);
}
/*
* SWP_PAGER_FREESWAPSPACE() - free raw swap space
*
* This routine returns the specified swap blocks back to the bitmap.
*
* Note: This routine may not block (it could in the old swap code),
* and through the use of the new blist routines it does not block.
*
* We must be called at splvm() to avoid races with bitmap frees from
* vm_page_remove() aka swap_pager_page_removed().
*
* This routine may not block
* This routine must be called at splvm().
*/
static __inline void
swp_pager_freeswapspace(blk, npages)
daddr_t blk;
int npages;
{
blist_free(swapblist, blk, npages);
vm_swap_size += npages;
swp_sizecheck();
}
/*
* SWAP_PAGER_FREESPACE() - frees swap blocks associated with a page
* range within an object.
*
* This is a globally accessible routine.
*
* This routine removes swapblk assignments from swap metadata.
*
* The external callers of this routine typically have already destroyed
* or renamed vm_page_t's associated with this range in the object so
* we should be ok.
*/
void
swap_pager_freespace(object, start, size)
vm_object_t object;
vm_pindex_t start;
vm_size_t size;
{
swp_pager_meta_free(object, start, size);
}
/*
* SWAP_PAGER_COPY() - copy blocks from source pager to destination pager
* and destroy the source.
*
* Copy any valid swapblks from the source to the destination. In
* cases where both the source and destination have a valid swapblk,
* we keep the destination's.
*
* This routine is allowed to block. It may block allocating metadata
* indirectly through swp_pager_meta_build() or if paging is still in
* progress on the source.
*
* XXX vm_page_collapse() kinda expects us not to block because we
* supposedly do not need to allocate memory, but for the moment we
* *may* have to get a little memory from the zone allocator, but
* it is taken from the interrupt memory. We should be ok.
*
* The source object contains no vm_page_t's (which is just as well)
*
* The source object is of type OBJT_SWAP.
*
* The source and destination objects must be
* locked or inaccessible (XXX are they ???)
*/
void
swap_pager_copy(srcobject, dstobject, offset, destroysource)
vm_object_t srcobject;
vm_object_t dstobject;
vm_pindex_t offset;
int destroysource;
{
vm_pindex_t i;
/*
* If destroysource is set, we remove the source object from the
* swap_pager internal queue now.
*/
if (destroysource) {
if (srcobject->handle == NULL) {
TAILQ_REMOVE(
&swap_pager_un_object_list,
srcobject,
pager_object_list
);
} else {
TAILQ_REMOVE(
NOBJLIST(srcobject->handle),
srcobject,
pager_object_list
);
}
}
/*
* transfer source to destination.
*/
for (i = 0; i < dstobject->size; ++i) {
daddr_t dstaddr;
/*
* Locate (without changing) the swapblk on the destination,
* unless it is invalid in which case free it silently, or
* if the destination is a resident page, in which case the
* source is thrown away.
*/
dstaddr = swp_pager_meta_ctl(dstobject, i, 0);
if (dstaddr == SWAPBLK_NONE) {
/*
* Destination has no swapblk and is not resident,
* copy source.
*/
daddr_t srcaddr;
srcaddr = swp_pager_meta_ctl(
srcobject,
i + offset,
SWM_POP
);
if (srcaddr != SWAPBLK_NONE)
swp_pager_meta_build(dstobject, i, srcaddr, 1);
} else {
/*
* Destination has valid swapblk or it is represented
* by a resident page. We destroy the sourceblock.
*/
swp_pager_meta_ctl(srcobject, i + offset, SWM_FREE);
}
}
/*
* Free left over swap blocks in source.
*
* We have to revert the type to OBJT_DEFAULT so we do not accidently
* double-remove the object from the swap queues.
*/
if (destroysource) {
swp_pager_meta_free_all(srcobject);
/*
* Reverting the type is not necessary, the caller is going
* to destroy srcobject directly, but I'm doing it here
* for consistancy since we've removed the object from its
* queues.
*/
srcobject->type = OBJT_DEFAULT;
}
return;
}
/*
* SWAP_PAGER_HASPAGE() - determine if we have good backing store for
* the requested page.
*
* We determine whether good backing store exists for the requested
* page and return TRUE if it does, FALSE if it doesn't.
*
* If TRUE, we also try to determine how much valid, contiguous backing
* store exists before and after the requested page within a reasonable
* distance. We do not try to restrict it to the swap device stripe
* (that is handled in getpages/putpages). It probably isn't worth
* doing here.
*/
boolean_t
swap_pager_haspage(object, pindex, before, after)
vm_object_t object;
vm_pindex_t pindex;
int *before;
int *after;
{
daddr_t blk0;
/*
* do we have good backing store at the requested index ?
*/
blk0 = swp_pager_meta_ctl(object, pindex, 0);
if (blk0 & SWAPBLK_NONE) {
if (before)
*before = 0;
if (after)
*after = 0;
return (FALSE);
}
/*
* find backwards-looking contiguous good backing store
*/
if (before != NULL) {
int i;
for (i = 1; i < (SWB_NPAGES/2); ++i) {
daddr_t blk;
if (i > pindex)
break;
blk = swp_pager_meta_ctl(object, pindex - i, 0);
if (blk & SWAPBLK_NONE)
break;
if (blk != blk0 - i)
break;
}
*before = (i - 1);
}
/*
* find forward-looking contiguous good backing store
*/
if (after != NULL) {
int i;
for (i = 1; i < (SWB_NPAGES/2); ++i) {
daddr_t blk;
blk = swp_pager_meta_ctl(object, pindex + i, 0);
if (blk & SWAPBLK_NONE)
break;
if (blk != blk0 + i)
break;
}
*after = (i - 1);
}
return (TRUE);
}
/*
* SWAP_PAGER_PAGE_UNSWAPPED() - remove swap backing store related to page
*
* This removes any associated swap backing store, whether valid or
* not, from the page.
*
* This routine is typically called when a page is made dirty, at
* which point any associated swap can be freed. MADV_FREE also
* calls us in a special-case situation
*
* NOTE!!! If the page is clean and the swap was valid, the caller
* should make the page dirty before calling this routine. This routine
* does NOT change the m->dirty status of the page. Also: MADV_FREE
* depends on it.
*
* This routine may not block
*/
static void
swap_pager_unswapped(m)
vm_page_t m;
{
swp_pager_meta_ctl(m->object, m->pindex, SWM_FREE);
}
/*
* SWAP_PAGER_GETPAGES() - bring pages in from swap
*
* Attempt to retrieve (m, count) pages from backing store, but make
* sure we retrieve at least m[reqpage]. We try to load in as large
* a chunk surrounding m[reqpage] as is contiguous in swap and which
* belongs to the same object.
*
* The code is designed for asynchronous operation and
* immediate-notification of 'reqpage' but tends not to be
* used that way. Please do not optimize-out this algorithmic
* feature, I intend to improve on it in the future.
*
* The parent has a single vm_object_pip_add() reference prior to
* calling us and we should return with the same.
*
* The parent has BUSY'd the pages. We should return with 'm'
* left busy, but the others adjusted.
*/
static int
swap_pager_getpages(object, m, count, reqpage)
vm_object_t object;
vm_page_t *m;
int count, reqpage;
{
struct buf *bp;
vm_page_t mreq;
int s;
int i;
int j;
daddr_t blk;
vm_offset_t kva;
vm_pindex_t lastpindex;
mreq = m[reqpage];
#if !defined(MAX_PERF)
if (mreq->object != object) {
panic("swap_pager_getpages: object mismatch %p/%p",
object,
mreq->object
);
}
#endif
/*
* Calculate range to retrieve. The pages have already been assigned
* their swapblks. We require a *contiguous* range that falls entirely
* within a single device stripe. If we do not supply it, bad things
* happen.
*/
blk = swp_pager_meta_ctl(mreq->object, mreq->pindex, 0);
for (i = reqpage - 1; i >= 0; --i) {
daddr_t iblk;
iblk = swp_pager_meta_ctl(m[i]->object, m[i]->pindex, 0);
if (iblk & SWAPBLK_NONE)
break;
if ((blk ^ iblk) & dmmax_mask)
break;
if (blk != iblk + (reqpage - i))
break;
}
++i;
for (j = reqpage + 1; j < count; ++j) {
daddr_t jblk;
jblk = swp_pager_meta_ctl(m[j]->object, m[j]->pindex, 0);
if (jblk & SWAPBLK_NONE)
break;
if ((blk ^ jblk) & dmmax_mask)
break;
if (blk != jblk - (j - reqpage))
break;
}
/*
* If blk itself is bad, well, we can't do any I/O. This should
* already be covered as a side effect, but I'm making sure.
*/
if (blk & SWAPBLK_NONE) {
i = reqpage;
j = reqpage + 1;
}
/*
* free pages outside our collection range. Note: we never free
* mreq, it must remain busy throughout.
*/
{
int k;
for (k = 0; k < i; ++k) {
vm_page_free(m[k]);
}
for (k = j; k < count; ++k) {
vm_page_free(m[k]);
}
}
/*
* Return VM_PAGER_FAIL if we have nothing
* to do. Return mreq still busy, but the
* others unbusied.
*/
if (blk & SWAPBLK_NONE)
return(VM_PAGER_FAIL);
/*
* Get a swap buffer header to perform the IO
*/
bp = getpbuf(&nsw_rcount);
kva = (vm_offset_t) bp->b_data;
/*
* map our page(s) into kva for input
*
* NOTE: B_PAGING is set by pbgetvp()
*/
pmap_qenter(kva, m + i, j - i);
bp->b_flags = B_BUSY | B_READ | B_CALL;
bp->b_iodone = swp_pager_async_iodone;
bp->b_proc = &proc0; /* XXX (but without B_PHYS set this is ok) */
bp->b_rcred = bp->b_wcred = bp->b_proc->p_ucred;
crhold(bp->b_rcred);
crhold(bp->b_wcred);
bp->b_data = (caddr_t) kva;
/*
* b_blkno is in page-sized chunks. swapblk is valid, too, so
* we don't have to mask it against SWAPBLK_MASK.
*/
bp->b_blkno = blk - (reqpage - i);
bp->b_bcount = PAGE_SIZE * (j - i);
bp->b_bufsize = PAGE_SIZE * (j - i);
bp->b_pager.pg_reqpage = reqpage - i;
{
int k;
for (k = i; k < j; ++k) {
bp->b_pages[k - i] = m[k];
vm_page_flag_set(m[k], PG_SWAPINPROG);
}
}
bp->b_npages = j - i;
pbgetvp(swapdev_vp, bp);
cnt.v_swapin++;
cnt.v_swappgsin += bp->b_npages;
/*
* We still hold the lock on mreq, and our automatic completion routine
* does not remove it.
*/
vm_object_pip_add(mreq->object, bp->b_npages);
lastpindex = m[j-1]->pindex;
/*
* perform the I/O. NOTE!!! bp cannot be considered valid after
* this point because we automatically release it on completion.
* Instead, we look at the one page we are interested in which we
* still hold a lock on even through the I/O completion.
*
* The other pages in our m[] array are also released on completion,
* so we cannot assume they are valid anymore either.
*
* NOTE: b_blkno is destroyed by the call to VOP_STRATEGY
*/
VOP_STRATEGY(bp->b_vp, bp);
/*
* wait for the page we want to complete. PG_SWAPINPROG is always
* cleared on completion. If an I/O error occurs, SWAPBLK_NONE
* is set in the meta-data.
*/
s = splvm();
while ((mreq->flags & PG_SWAPINPROG) != 0) {
vm_page_flag_set(mreq, PG_WANTED | PG_REFERENCED);
cnt.v_intrans++;
if (tsleep(mreq, PSWP, "swread", hz*20)) {
printf(
"swap_pager: indefinite wait buffer: device:"
" %#lx, blkno: %ld, size: %ld\n",
(u_long)bp->b_dev, (long)bp->b_blkno,
(long)bp->b_bcount
);
}
}
splx(s);
/*
* mreq is left bussied after completion, but all the other pages
* are freed. If we had an unrecoverable read error the page will
* not be valid.
*/
if (mreq->valid != VM_PAGE_BITS_ALL) {
return(VM_PAGER_ERROR);
} else {
mreq->object->last_read = lastpindex;
return(VM_PAGER_OK);
}
/*
* A final note: in a low swap situation, we cannot deallocate swap
* and mark a page dirty here because the caller is likely to mark
* the page clean when we return, causing the page to possibly revert
* to all-zero's later.
*/
}
/*
* swap_pager_putpages:
*
* Assign swap (if necessary) and initiate I/O on the specified pages.
*
* We support both OBJT_DEFAULT and OBJT_SWAP objects. DEFAULT objects
* are automatically converted to SWAP objects.
*
* In a low memory situation we may block in VOP_STRATEGY(), but the new
* vm_page reservation system coupled with properly written VFS devices
* should ensure that no low-memory deadlock occurs. This is an area
* which needs work.
*
* The parent has N vm_object_pip_add() references prior to
* calling us and will remove references for rtvals[] that are
* not set to VM_PAGER_PEND. We need to remove the rest on I/O
* completion.
*
* The parent has soft-busy'd the pages it passes us and will unbusy
* those whos rtvals[] entry is not set to VM_PAGER_PEND on return.
* We need to unbusy the rest on I/O completion.
*/
int
swap_pager_putpages(object, m, count, sync, rtvals)
vm_object_t object;
vm_page_t *m;
int count;
boolean_t sync;
int *rtvals;
{
int i;
int n = 0;
int grv = VM_PAGER_OK;
#if !defined(MAX_PERF)
if (count && m[0]->object != object) {
panic("swap_pager_getpages: object mismatch %p/%p",
object,
m[0]->object
);
}
#endif
/*
* Step 1
*
* Turn object into OBJT_SWAP
* check for bogus sysops
* force sync if not pageout process
*/
if (object->type != OBJT_SWAP) {
swp_pager_meta_build(object, 0, SWAPBLK_NONE, 0);
}
if (curproc != pageproc)
sync = TRUE;
/*
* Step 2
*
* Assign swap blocks and issue I/O. We reallocate swap on the fly.
* The page is left dirty until the pageout operation completes
* successfully.
*/
for (i = 0; i < count; i += n) {
int s;
int j;
struct buf *bp;
daddr_t blk;
/*
* Maximum I/O size is limited by a number of factors.
*/
n = min(BLIST_MAX_ALLOC, count - i);
n = min(n, max_pageout_cluster);
/*
* Get biggest block of swap we can. If we fail, fall
* back and try to allocate a smaller block. Don't go
* overboard trying to allocate space if it would overly
* fragment swap.
*/
while (
(blk = swp_pager_getswapspace(n)) == SWAPBLK_NONE &&
n > 4
) {
n >>= 1;
}
if (blk == SWAPBLK_NONE) {
for (j = 0; j < n; ++j) {
rtvals[i+j] = VM_PAGER_FAIL;
}
grv = VM_PAGER_FAIL;
continue;
}
/*
* Oops, too big if it crosses a stripe
*
* 1111000000
* 111111
* 1000001
*/
if ((blk ^ (blk + n)) & dmmax_mask) {
j = ((blk + dmmax) & dmmax_mask) - blk;
swp_pager_freeswapspace(blk + j, n - j);
n = j;
}
/*
* All I/O parameters have been satisfied, build the I/O
* request and assign the swap space.
*
* NOTE: B_PAGING is set by pbgetvp()
*/
bp = getpbuf(&nsw_wcount);
bp->b_spc = NULL; /* not used, but NULL-out anyway */
pmap_qenter((vm_offset_t)bp->b_data, &m[i], n);
bp->b_flags = B_BUSY | B_ASYNC;
bp->b_proc = &proc0; /* XXX (but without B_PHYS this is ok) */
bp->b_rcred = bp->b_wcred = bp->b_proc->p_ucred;
if (bp->b_rcred != NOCRED)
crhold(bp->b_rcred);
if (bp->b_wcred != NOCRED)
crhold(bp->b_wcred);
pbgetvp(swapdev_vp, bp);
bp->b_bcount = PAGE_SIZE * n;
bp->b_bufsize = PAGE_SIZE * n;
bp->b_blkno = blk;
s = splvm();
for (j = 0; j < n; ++j) {
vm_page_t mreq = m[i+j];
swp_pager_meta_build(
mreq->object,
mreq->pindex,
blk + j,
0
);
mreq->dirty = VM_PAGE_BITS_ALL;
rtvals[i+j] = VM_PAGER_OK;
vm_page_flag_set(mreq, PG_SWAPINPROG);
bp->b_pages[j] = mreq;
}
bp->b_flags |= B_CALL;
bp->b_npages = n;
cnt.v_swapout++;
cnt.v_swappgsout += bp->b_npages;
swapdev_vp->v_numoutput++;
/*
* asynchronous
*
* NOTE: b_blkno is destroyed by the call to VOP_STRATEGY
*/
if (sync == FALSE) {
bp->b_iodone = swp_pager_async_iodone;
bp->b_dirtyoff = 0;
bp->b_dirtyend = bp->b_bcount;
VOP_STRATEGY(bp->b_vp, bp);
for (j = 0; j < n; ++j)
rtvals[i+j] = VM_PAGER_PEND;
splx(s);
grv = VM_PAGER_PEND;
continue;
}
/*
* synchronous
*
* NOTE: b_blkno is destroyed by the call to VOP_STRATEGY
*/
bp->b_iodone = swp_pager_sync_iodone;
VOP_STRATEGY(bp->b_vp, bp);
/*
* Wait for the sync I/O to complete, then update rtvals.
* We just set the rtvals[] to VM_PAGER_PEND so we can call
* our async completion routine at the end, thus avoiding a
* double-free.
*/
while ((bp->b_flags & B_DONE) == 0) {
tsleep(bp, PVM, "swwrt", 0);
}
if (bp->b_flags & B_ERROR) {
grv = VM_PAGER_ERROR;
}
for (j = 0; j < n; ++j)
rtvals[i+j] = VM_PAGER_PEND;
if (bp->b_flags & B_ERROR) {
grv = VM_PAGER_ERROR;
}
/*
* Now that we are through with the bp, we can call the
* normal async completion, which frees everything up.
*/
swp_pager_async_iodone(bp);
splx(s);
}
return(grv);
}
/*
* swap_pager_sync_iodone:
*
* Completion routine for synchronous reads and writes from/to swap.
* We just mark the bp is complete and wake up anyone waiting on it.
*
* This routine may not block.
*/
static void
swp_pager_sync_iodone(bp)
struct buf *bp;
{
bp->b_flags |= B_DONE;
bp->b_flags &= ~B_ASYNC;
wakeup(bp);
}
/*
* swp_pager_async_iodone:
*
* Completion routine for asynchronous reads and writes from/to swap.
* Also called manually by synchronous code to finish up a bp.
*
* WARNING! This routine may be called from an interrupt. We cannot
* mess with swap metadata unless we want to run all our other routines
* at splbio() too, which I'd rather not do. We up ourselves
* to splvm() because we may call vm_page_free(), which can unlink a
* page from an object.
*
* XXX currently I do not believe any object routines protect
* object->memq at splvm(). The code must be gone over to determine
* the actual state of the problem.
*
* For READ operations, the pages are PG_BUSY'd. For WRITE operations,
* the pages are vm_page_t->busy'd. For READ operations, we PG_BUSY
* unbusy all pages except the 'main' request page. For WRITE
* operations, we vm_page_t->busy'd unbusy all pages ( we can do this
* because we marked them all VM_PAGER_PEND on return from putpages ).
*
* This routine may not block.
* This routine is called at splbio()
*/
static void
swp_pager_async_iodone(bp)
register struct buf *bp;
{
int s;
int i;
vm_object_t object = NULL;
s = splvm();
bp->b_flags |= B_DONE;
/*
* report error
*/
if (bp->b_flags & B_ERROR) {
printf(
"swap_pager: I/O error - %s failed; blkno %ld,"
"size %ld, error %d\n",
((bp->b_flags & B_READ) ? "pagein" : "pageout"),
(long)bp->b_blkno,
(long)bp->b_bcount,
bp->b_error
);
}
/*
* set object.
*/
if (bp->b_npages)
object = bp->b_pages[0]->object;
/*
* remove the mapping for kernel virtual
*/
pmap_qremove((vm_offset_t)bp->b_data, bp->b_npages);
/*
* cleanup pages. If an error occurs writing to swap, we are in
* very serious trouble. If it happens to be a disk error, though,
* we may be able to recover by reassigning the swap later on. So
* in this case we remove the m->swapblk assignment for the page
* but do not free it in the rlist. The errornous block(s) are thus
* never reallocated as swap. Redirty the page and continue.
*/
for (i = 0; i < bp->b_npages; ++i) {
vm_page_t m = bp->b_pages[i];
vm_page_flag_clear(m, PG_SWAPINPROG);
if (bp->b_flags & B_ERROR) {
/*
* If an error occurs I'd love to throw the swapblk
* away without freeing it back to swapspace, so it
* can never be used again. But I can't from an
* interrupt.
*/
if (bp->b_flags & B_READ) {
/*
* When reading, reqpage needs to stay
* locked for the parent, but all other
* pages can be freed. We still want to
* wakeup the parent waiting on the page,
* though. ( also: pg_reqpage can be -1 and
* not match anything ).
*
* We have to wake specifically requested pages
* up too because we cleared PG_SWAPINPROG and
* someone may be waiting for that.
*
* NOTE: for reads, m->dirty will probably
* be overriden by the original caller of
* getpages so don't play cute tricks here.
*
* XXX it may not be legal to free the page
* here as this messes with the object->memq's.
*/
m->valid = 0;
vm_page_flag_clear(m, PG_ZERO);
if (i != bp->b_pager.pg_reqpage)
vm_page_free(m);
else
vm_page_flash(m);
/*
* If i == bp->b_pager.pg_reqpage, do not wake
* the page up. The caller needs to.
*/
} else {
/*
* If a write error occurs, reactivate page
* so it doesn't clog the inactive list,
* then finish the I/O.
*/
m->dirty = VM_PAGE_BITS_ALL;
vm_page_activate(m);
vm_page_io_finish(m);
}
} else if (bp->b_flags & B_READ) {
/*
* For read success, clear dirty bits. Nobody should
* have this page mapped but don't take any chances,
* make sure the pmap modify bits are also cleared.
*
* NOTE: for reads, m->dirty will probably be
* overriden by the original caller of getpages so
* we cannot set them in order to free the underlying
* swap in a low-swap situation. I don't think we'd
* want to do that anyway, but it was an optimization
* that existed in the old swapper for a time before
* it got ripped out due to precisely this problem.
*
* clear PG_ZERO in page.
*
* If not the requested page then deactivate it.
*
* Note that the requested page, reqpage, is left
* busied, but we still have to wake it up. The
* other pages are released (unbusied) by
* vm_page_wakeup(). We do not set reqpage's
* valid bits here, it is up to the caller.
*/
pmap_clear_modify(VM_PAGE_TO_PHYS(m));
m->valid = VM_PAGE_BITS_ALL;
m->dirty = 0;
vm_page_flag_clear(m, PG_ZERO);
/*
* We have to wake specifically requested pages
* up too because we cleared PG_SWAPINPROG and
* could be waiting for it in getpages. However,
* be sure to not unbusy getpages specifically
* requested page - getpages expects it to be
* left busy.
*/
if (i != bp->b_pager.pg_reqpage) {
vm_page_deactivate(m);
vm_page_wakeup(m);
} else {
vm_page_flash(m);
}
} else {
/*
* For write success, clear the modify and dirty
* status, then finish the I/O ( which decrements the
* busy count and possibly wakes waiter's up ).
*/
vm_page_protect(m, VM_PROT_READ);
pmap_clear_modify(VM_PAGE_TO_PHYS(m));
m->dirty = 0;
vm_page_io_finish(m);
}
}
/*
* adjust pip. NOTE: the original parent may still have its own
* pip refs on the object.
*/
if (object)
vm_object_pip_wakeupn(object, bp->b_npages);
/*
* release the physical I/O buffer
*/
relpbuf(bp, ((bp->b_flags & B_READ) ? &nsw_rcount : &nsw_wcount));
splx(s);
}
/************************************************************************
* SWAP META DATA *
************************************************************************
*
* These routines manipulate the swap metadata stored in the
* OBJT_SWAP object.
*
* In fact, we just have a few counters in the vm_object_t. The
* metadata is actually stored in a hash table.
*/
/*
* SWP_PAGER_HASH() - hash swap meta data
*
* This is an inline helper function which hash the swapblk given
* the object and page index. It returns a pointer to a pointer
* to the object, or a pointer to a NULL pointer if it could not
* find a swapblk.
*/
static __inline struct swblock **
swp_pager_hash(vm_object_t object, daddr_t index)
{
struct swblock **pswap;
struct swblock *swap;
index &= ~SWAP_META_MASK;
pswap = &swhash[(index ^ (int)(long)object) & swhash_mask];
while ((swap = *pswap) != NULL) {
if (swap->swb_object == object &&
swap->swb_index == index
) {
break;
}
pswap = &swap->swb_hnext;
}
return(pswap);
}
/*
* SWP_PAGER_META_BUILD() - add swap block to swap meta data for object
*
* We first convert the object to a swap object if it is a default
* object.
*
* The specified swapblk is added to the object's swap metadata. If
* the swapblk is not valid, it is freed instead. Any previously
* assigned swapblk is freed.
*/
static void
swp_pager_meta_build(
vm_object_t object,
daddr_t index,
daddr_t swapblk,
int waitok
) {
struct swblock *swap;
struct swblock **pswap;
/*
* Convert default object to swap object if necessary
*/
if (object->type != OBJT_SWAP) {
object->type = OBJT_SWAP;
object->un_pager.swp.swp_bcount = 0;
if (object->handle != NULL) {
TAILQ_INSERT_TAIL(
NOBJLIST(object->handle),
object,
pager_object_list
);
} else {
TAILQ_INSERT_TAIL(
&swap_pager_un_object_list,
object,
pager_object_list
);
}
}
/*
* Wait for free memory when waitok is TRUE prior to calling the
* zone allocator.
*/
while (waitok && cnt.v_free_count == 0) {
VM_WAIT;
}
/*
* If swapblk being added is invalid, just free it.
*/
if (swapblk & SWAPBLK_NONE) {
if (swapblk != SWAPBLK_NONE) {
swp_pager_freeswapspace(
index,
1
);
swapblk = SWAPBLK_NONE;
}
}
/*
* Locate hash entry. If not found create, but if we aren't adding
* anything just return.
*/
pswap = swp_pager_hash(object, index);
if ((swap = *pswap) == NULL) {
int i;
if (swapblk == SWAPBLK_NONE)
return;
swap = *pswap = zalloc(swap_zone);
swap->swb_hnext = NULL;
swap->swb_object = object;
swap->swb_index = index & ~SWAP_META_MASK;
swap->swb_count = 0;
++object->un_pager.swp.swp_bcount;
for (i = 0; i < SWAP_META_PAGES; ++i)
swap->swb_pages[i] = SWAPBLK_NONE;
}
/*
* Delete prior contents of metadata
*/
index &= SWAP_META_MASK;
if (swap->swb_pages[index] != SWAPBLK_NONE) {
swp_pager_freeswapspace(
swap->swb_pages[index] & SWAPBLK_MASK,
1
);
--swap->swb_count;
}
/*
* Enter block into metadata
*/
swap->swb_pages[index] = swapblk;
++swap->swb_count;
}
/*
* SWP_PAGER_META_FREE() - free a range of blocks in the object's swap metadata
*
* The requested range of blocks is freed, with any associated swap
* returned to the swap bitmap.
*
* This routine will free swap metadata structures as they are cleaned
* out. This routine does *NOT* operate on swap metadata associated
* with resident pages.
*
* This routine must be called at splvm()
*/
static void
swp_pager_meta_free(vm_object_t object, daddr_t index, daddr_t count)
{
if (object->type != OBJT_SWAP)
return;
while (count > 0) {
struct swblock **pswap;
struct swblock *swap;
pswap = swp_pager_hash(object, index);
if ((swap = *pswap) != NULL) {
daddr_t v = swap->swb_pages[index & SWAP_META_MASK];
if (v != SWAPBLK_NONE) {
swp_pager_freeswapspace(v, 1);
swap->swb_pages[index & SWAP_META_MASK] =
SWAPBLK_NONE;
if (--swap->swb_count == 0) {
*pswap = swap->swb_hnext;
zfree(swap_zone, swap);
--object->un_pager.swp.swp_bcount;
}
}
--count;
++index;
} else {
daddr_t n = SWAP_META_PAGES - (index & SWAP_META_MASK);
count -= n;
index += n;
}
}
}
/*
* SWP_PAGER_META_FREE_ALL() - destroy all swap metadata associated with object
*
* This routine locates and destroys all swap metadata associated with
* an object.
*/
static void
swp_pager_meta_free_all(vm_object_t object)
{
daddr_t index = 0;
if (object->type != OBJT_SWAP)
return;
while (object->un_pager.swp.swp_bcount) {
struct swblock **pswap;
struct swblock *swap;
pswap = swp_pager_hash(object, index);
if ((swap = *pswap) != NULL) {
int i;
for (i = 0; i < SWAP_META_PAGES; ++i) {
daddr_t v = swap->swb_pages[i];
if (v != SWAPBLK_NONE) {
#if !defined(MAX_PERF)
--swap->swb_count;
#endif
swp_pager_freeswapspace(
v,
1
);
}
}
#if !defined(MAX_PERF)
if (swap->swb_count != 0)
panic("swap_pager_meta_free_all: swb_count != 0");
#endif
*pswap = swap->swb_hnext;
zfree(swap_zone, swap);
--object->un_pager.swp.swp_bcount;
}
index += SWAP_META_PAGES;
#if !defined(MAX_PERF)
if (index > 0x20000000)
panic("swp_pager_meta_free_all: failed to locate all swap meta blocks");
#endif
}
}
/*
* SWP_PAGER_METACTL() - misc control of swap and vm_page_t meta data.
*
* This routine is capable of looking up, popping, or freeing
* swapblk assignments in the swap meta data or in the vm_page_t.
* The routine typically returns the swapblk being looked-up, or popped,
* or SWAPBLK_NONE if the block was freed, or SWAPBLK_NONE if the block
* was invalid. This routine will automatically free any invalid
* meta-data swapblks.
*
* It is not possible to store invalid swapblks in the swap meta data
* (other then a literal 'SWAPBLK_NONE'), so we don't bother checking.
*
* When acting on a busy resident page and paging is in progress, we
* have to wait until paging is complete but otherwise can act on the
* busy page.
*
* SWM_FREE remove and free swap block from metadata
*
* SWM_POP remove from meta data but do not free.. pop it out
*/
static daddr_t
swp_pager_meta_ctl(
vm_object_t object,
vm_pindex_t index,
int flags
) {
/*
* The meta data only exists of the object is OBJT_SWAP
* and even then might not be allocated yet.
*/
if (
object->type != OBJT_SWAP ||
object->un_pager.swp.swp_bcount == 0
) {
return(SWAPBLK_NONE);
}
{
struct swblock **pswap;
struct swblock *swap;
daddr_t r1 = SWAPBLK_NONE;
pswap = swp_pager_hash(object, index);
index &= SWAP_META_MASK;
if ((swap = *pswap) != NULL) {
r1 = swap->swb_pages[index];
if (r1 != SWAPBLK_NONE) {
if (flags & SWM_FREE) {
swp_pager_freeswapspace(
r1,
1
);
r1 = SWAPBLK_NONE;
}
if (flags & (SWM_FREE|SWM_POP)) {
swap->swb_pages[index] = SWAPBLK_NONE;
if (--swap->swb_count == 0) {
*pswap = swap->swb_hnext;
zfree(swap_zone, swap);
--object->un_pager.swp.swp_bcount;
}
}
}
}
return(r1);
}
/* not reached */
}