Jung-uk Kim d69e0bb92e - Move Ethernet@WireSpeed and jumbo frame configurations to separate ... functions. The idea is taken from OpenBSD. - Set/clear jumbo frame configurations for bge(4). - Re-add BCM5750 PHY workaround for bce(4), which was mistakenly removed from the previous commit.		2007-01-15 22:21:44 +00:00
..
acphy.c	Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL	2007-01-12 22:59:38 +00:00
acphyreg.h	- Correct the AC_MCTL_BYP_PCS constant.	2007-01-12 22:58:04 +00:00
amphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
amphyreg.h
bmtphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
bmtphyreg.h
brgphy.c	- Move Ethernet@WireSpeed and jumbo frame configurations to separate	2007-01-15 22:21:44 +00:00
brgphyreg.h
ciphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
ciphyreg.h
e1000phy.c	o Add support code for newer Marvell PHYs.	2006-12-11 11:09:48 +00:00
e1000phyreg.h	Add additional Marvell PHY registers.	2006-12-11 10:43:32 +00:00
exphy.c	- Take advantage of mii_phy_dev_probe().	2007-01-12 23:17:43 +00:00
gentbi.c	Analogous to mii_add_media(), factor out the code for checking whether	2006-11-27 23:50:19 +00:00
inphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
inphyreg.h
ip1000phy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
ip1000phyreg.h	Add ip1000 PHY driver for IC Plus IP1000A integrated PHY.	2006-07-25 00:16:09 +00:00
lxtphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
lxtphyreg.h
mii_physubr.c	Remove mii_media_from_bmcr(); all previous users have been converted to	2007-01-13 00:14:45 +00:00
mii.c
mii.h
miibus_if.m
miidevs	- Fix BCM5754 support found in Dell PowerEdge SC440.	2007-01-15 21:43:43 +00:00
miivar.h	Remove mii_media_from_bmcr(); all previous users have been converted to	2007-01-13 00:14:45 +00:00
mlphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
nsgphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
nsgphyreg.h
nsphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
nsphyreg.h
pnaphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
qsphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
qsphyreg.h
rgephy.c	Correct the previous change:	2006-12-18 02:14:26 +00:00
rgephyreg.h
rlphy.c	After another thought there is another nail for the mii_phy_dev_probe()-	2007-01-13 00:17:39 +00:00
rlswitch.c	MFp4: add basic driver for RTL8305SC switch in PHY emulation	2007-01-05 01:46:26 +00:00
ruephy.c	- Take advantage of mii_phy_dev_probe() and mii_phy_setmedia().	2007-01-13 00:06:41 +00:00
ruephyreg.h
tdkphy.c	- Don't set MIIF_NOISOLATE so tdkphy(4) can be used in configurations	2006-12-02 20:16:45 +00:00
tdkphyreg.h
tlphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
tlphyreg.h
ukphy_subr.c	If the PHY has 1000BASE-T capability, check to see if a 1000BASE-T speed	2006-05-19 03:51:42 +00:00
ukphy.c	Replace hard-coded magic constants to system defined constants	2006-07-03 02:53:40 +00:00
xmphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
xmphyreg.h