mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
Code Issues Releases Activity
d95502a838
freebsd/sys/pci/if_wxreg.h
Matt Jacob 91e6ce1b32 Pick up changes from Parag Patel and Kachun Lee, and self: 
1. The offsets for some registers change in LIVENGOOD. Gratuitously.

2. Define LIVENGOOD and LIVENGOOD_CU part numbers. Add some more
specific LIVENGOOD defaults.

3. Add definitions for PHY support for the copper LIVENGOOD part
(10/100/1000).
2001-04-09 21:47:11 +00:00

466 lines
15 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*
* Principal Author: Matthew Jacob
* Copyright (c) 1999, 2001 by Traakan Software
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Additional Copyright (c) 2001 by Parag Patel
* under same licence for MII PHY code.
*/
#define WX_VENDOR_INTEL 0x8086
#define WX_PRODUCT_82452 0x1000
#define WX_PRODUCT_LIVENGOOD 0x1001
#define WX_PRODUCT_82452_SC 0x1003
#define WX_PRODUCT_82543 0x1004
#define WX_MMBA 0x10
#define MWI 0x10 /* Memory Write Invalidate */
#define WX_CACHELINE_SIZE 0x20
/* Join PCI ID and revision into one value */
#define WX_WISEMAN_0 0x10000000
#define WX_WISEMAN_2_0 0x10000002
#define WX_WISEMAN_2_1 0x10000003
#define WX_LIVENGOOD 0x10010000
#define WX_LIVENGOOD_CU 0x10040002
#define IS_WISEMAN(sc) ((sc)->wx_idnrev < WX_LIVENGOOD)
#define IS_LIVENGOOD(sc) ((sc)->wx_idnrev >= WX_LIVENGOOD)
#define IS_LIVENGOOD_CU(sc) ((sc)->wx_idnrev == WX_LIVENGOOD_CU)
/*
* Information about this chipset gathered from a released Intel Linux driver,
* which was clearly a port of an NT driver.
*/
/*
* Various Descriptor Structures.
* These are all in little endian format (for now).
*/
typedef struct {
u_int32_t lowpart;
u_int32_t highpart;
} wxpa_t, wxrp_t;
/*
* Receive Descriptor.
* The base address of a receive descriptor ring must be on a 4KB boundary,
* and they must be allocated in multiples of 8.
*/
typedef struct {
wxpa_t address; /* physical address of buffer */
u_int16_t length;
u_int16_t csum;
u_int8_t status;
u_int8_t errors;
u_int16_t special;
} wxrd_t;
#define RDSTAT_DD 0x1 /* descriptor done */
#define RDSTAT_EOP 0x2 /* end of packet */
#define RDSTAT_RSVD 0x74 /* reserved bits */
#define RDERR_CRC 0x1 /* CRC Error */
#define RDERR_SE 0x2 /* Symbol Error */
#define RDERR_SEQ 0x4 /* Sequence Error */
/*
* Transmit Descriptor
* The base address of a transmit descriptor ring must be on a 4KB boundary,
* and they must be allocated in multiples of 8.
*/
typedef struct {
wxpa_t address;
u_int16_t length;
u_int8_t cso; /* checksum offset */
u_int8_t cmd; /* cmd */
u_int8_t status; /* status */
u_int8_t css; /* checksum start */
u_int16_t special;
} wxtd_t;
#define TXCMD_EOP 0x1 /* last packet */
#define TXCMD_IFCS 0x2 /* insert FCS */
#define TXCMD_IC 0x4 /* insert checksum */
#define TXCMD_RS 0x8 /* report status */
#define TXCMD_RPS 0x10 /* report packet sent */
#define TXCMD_SM 0x20 /* symbol mode */
#define TXCMD_IDE 0x80 /* interrupt delay enable */
#define TXSTS_DD 0x1 /* descriptor done */
#define TXSTS_EC 0x2 /* excess collisions */
#define TXSTS_LC 0x4 /* late collision */
/*
* This device can only be accessed via memory space.
*/
/*
* Register access via offsets.
*
* Our brilliant friends at Intel decided to move registers offsets
* around from chip version to chip version. It's amazing that some
* deity doesn't zap these suckers. Really.
*/
#define WXREG_DCR 0x00000000
#define WXREG_DSR 0x00000008
#define WXREG_EECDR 0x00000010
#define WXREG_EXCT 0x00000018
#define WXREG_MDIC 0x00000020
#define WXREG_FCAL 0x00000028
#define WXREG_FCAH 0x0000002C
#define WXREG_FCT 0x00000030
#define WXREG_VET 0x00000038
#define WXREG_RAL_BASE 0x00000040
#define WXREG_RAL_LO(x) (WXREG_RAL_BASE + ((x) << 3))
#define WXREG_RAL_HI(x) (WXREG_RAL_LO(x) + 4)
#define WXREG_ICR 0x000000c0
#define WXREG_ICS 0x000000c8
#define WXREG_IMASK 0x000000d0
#define WXREG_IMCLR 0x000000d8
#define WXREG_RCTL 0x00000100
#define WXREG_RDTR0 0x00000108
#define WXREG_RDTR0_LIVENGOOD 0x00002820
#define WXREG_RDBA0_LO 0x00000110
#define WXREG_RDBA0_LO_LIVENGOOD 0x00002800
#define WXREG_RDBA0_HI 0x00000114
#define WXREG_RDBA0_HI_LIVENGOOD 0x00002804
#define WXREG_RDLEN0 0x00000118
#define WXREG_RDLEN0_LIVENGOOD 0x00002808
#define WXREG_RDH0 0x00000120
#define WXREG_RDH0_LIVENGOOD 0x00002810
#define WXREG_RDT0 0x00000128
#define WXREG_RDT0_LIVENGOOD 0x00002818
#define WXREG_RDTR1 0x00000130
#define WXREG_RDBA1_LO 0x00000138
#define WXREG_RDBA1_HI 0x0000013C
#define WXREG_RDLEN1 0x00000140
#define WXREG_RDH1 0x00000148
#define WXREG_RDT1 0x00000150
#define WXREG_FLOW_RCV_HI 0x00000160
#define WXREG_FLOW_RCV_HI_LIVENGOOD 0x00002168
#define WXREG_FLOW_RCV_LO 0x00000168
#define WXREG_FLOW_RCV_LO_LIVENGOOD 0x00002160
#define WXREG_FLOW_XTIMER 0x00000170
#define WXREG_XMIT_CFGW 0x00000178
#define WXREG_RECV_CFGW 0x00000180
#define WXREG_MTA 0x00000200
#define WXREG_TCTL 0x00000400
#define WXREG_TQSA_LO 0x00000408
#define WXREG_TQSA_HI 0x0000040C
#define WXREG_TIPG 0x00000410
#define WXREG_TQC 0x00000418
#define WXREG_TDBA_LO 0x00000420
#define WXREG_TDBA_LO_LIVENGOOD 0x00003800
#define WXREG_TDBA_HI 0x00000424
#define WXREG_TDBA_HI_LIVENGOOD 0x00003804
#define WXREG_TDLEN 0x00000428
#define WXREG_TDLEN_LIVENGOOD 0x00003808
#define WXREG_TDH 0x00000430
#define WXREG_TDH_LIVENGOOD 0x00003810
#define WXREG_TDT 0x00000438
#define WXREG_TDT_LIVENGOOD 0x00003818
#define WXREG_TIDV 0x00000440
#define WXREG_TIDV_LIVENGOOD 0x00003820
#define WXREG_VFTA 0x00000600
#define WX_RAL_TAB_SIZE 16
#define WX_RAL_AV 0x80000000
#define WX_MC_TAB_SIZE 128
#define WX_VLAN_TAB_SIZE 128
/*
* Device Control Register Defines
*/
#define WXDCR_FD 0x1 /* full duplex */
#define WXDCR_BEM 0x2 /* big endian mode */
#define WXDCR_FAIR 0x4 /* 1->Fairness, 0->Receive Priority */
#define WXDCR_LRST 0x8 /* Link Reset */
#define WXDCR_ASDE 0x20 /* ??? */
#define WXDCR_SLE 0x20 /* ??? */
#define WXDCR_SLU 0x40 /* Set Link Up */
#define WXDCR_ILOS 0x80 /* Invert Loss-of-Signal */
#define WXDCR_10BT 0x000 /* set 10BaseT */
#define WXDCR_100BT 0x100 /* LIVENGOOD: Set 100BaseT */
#define WXDCR_1000BT 0x200 /* LIVENGOOD: Set 1000BaseT */
#define WXDCR_SPEED_MASK 0x300
#define WXDCR_BEM32 0x400 /* LIVENGOOD: Set Big Endian 32 (?) */
#define WXDCR_FRCSPD 0x800 /* LIVENGOOD: Force Speed (?) */
#define WXDCR_FRCDPX 0x1000 /* LIVENGOOD: Force Full Duplex */
/*
* General purpose I/O pins
*
* Pin 0 is for the LED.
*
* Pin 1 is to detect loss of signal (LOS)- if it is set, we've lost signal.
*/
#define WXDCR_SWDPINS_SHIFT 18
#define WXDCR_SWDPINS_MASK 0xf
#define WXDCR_SWDPIN0 (1 << 18) /* 0x00040000 - PHY reset */
#define WXDCR_SWDPIN1 (1 << 19) /* 0x00080000 */
#define WXDCR_SWDPIN2 (1 << 20) /* 0x00100000 - PHY data */
#define WXDCR_SWDPIN3 (1 << 21) /* 0x00200000 - PHY clk */
#define WXDCR_SWDPIO_SHIFT 22
#define WXDCR_SWDPIO_MASK 0xf
#define WXDCR_SWDPIO0 (1 << 22) /* 0x00400000 - PHY rst dir */
#define WXDCR_SWDPIO1 (1 << 23) /* 0x00800000 */
#define WXDCR_SWDPIO2 (1 << 24) /* 0x01000000 - PHY data dir */
#define WXDCR_SWDPIO3 (1 << 25) /* 0x02000000 - PHY clk dir */
#define WXDCR_RST 0x04000000 /* Device Reset (self clearing) */
#define WXDCR_RFCE 0x08000000 /* Receive Flow Control Enable */
#define WXDCR_TFCE 0x10000000 /* Transmit Flow Control Enable */
#define WXDCR_RTE 0x20000000 /* Routing Tag Enable */
#define WXDCR_VME 0x40000000 /* VLAN Mode Enable */
/*
* Device Status Register Defines
*/
#define WXDSR_FD 0x1 /* full duplex */
#define WXDSR_LU 0x2 /* link up */
#define WXDSR_TXCLK 0x4 /* transmit clock running */
#define WXDSR_RBCLK 0x8 /* receive clock running */
#define WXDSR_TXOFF 0x10 /* transmit paused */
#define WXDSR_TBIMODE 0x20 /* LIVENGOOD: Fibre Mode */
#define WXDSR_100BT 0x40 /* LIVENGOOD: 100BaseT */
#define WXDSR_1000BT 0x80 /* LIVENGOOD: 1000BaseT */
#define WXDSR_ASDV 0x300 /* LIVENGOOD: ?? */
#define WXDSR_MTXCKOK 0x400 /* LIVENGOOD: ?? */
#define WXDSR_PCI66 0x800 /* LIVENGOOD: 66 MHz bus */
#define WXDSR_BUS64 0x1000 /* LIVENGOOD: In 64 bit slot */
/*
* EEPROM Register Defines
*/
#define WXEECD_SK 0x1 /* enable clock */
#define WXEECD_CS 0x2 /* chip select */
#define WXEECD_DI 0x4 /* data input */
#define WXEECD_DO 0x8 /* data output */
#define EEPROM_READ_OPCODE 0x6
/*
* Constant Flow Control Frame MAC Address and Type values.
*/
#define FC_FRM_CONST_LO 0x00C28001
#define FC_FRM_CONST_HI 0x0100
#define FC_TYP_CONST 0x8808
/*
* Bits pertinent for the Receive Address register pairs. The low address
* is the low 32 bits of a 48 bit MAC address. The high address contains
* bits 32-47 of the 48 bit MAC address. The top bit in the high address
* is a 'valid' bit.
*/
#define WXRAH_RDR1 0x40000000 /* second receive descriptor ring */
#define WXRAH_VALID 0x80000000
/*
* Interrupt Cause Bits
*/
#define WXISR_TXDW 0x1 /* transmit descriptor written back */
#define WXISR_TXQE 0x2 /* transmit queue empty */
#define WXISR_LSC 0x4 /* link status change */
#define WXISR_RXSEQ 0x8 /* receive sequence error */
#define WXISR_RXDMT0 0x10 /* receiver ring 0 getting empty */
#define WXISR_RXDMT1 0x20 /* receiver ring 1 getting empty */
#define WXISR_RXO 0x40 /* receiver overrun */
#define WXISR_RXT0 0x80 /* ring 0 receiver timer interrupt */
#define WXISR_RXT1 0x100 /* ring 1 receiver timer interrupt */
#define WXISR_PCIE 0x200 /* ?? Probably PCI interface error... */
#define WXISR_MDIAC 0x200
#define WXISR_RXCFG 0x400
#define WXISR_GPI_EN0 0x800
#define WXISR_GPI_EN1 0x1000 /* appears to be PHY intr line */
#define WXISR_GPI_EN2 0x2000
#define WXISR_GPI_EN3 0x4000
#define WXIENABLE_DEFAULT \
(WXISR_RXO | WXISR_RXT0 | WXISR_RXDMT0 | WXISR_RXSEQ | \
WXISR_LSC | WXISR_PCIE | WXISR_GPI_EN1)
#define WXDISABLE 0xffffffff
/*
* Receive Control Register bits.
*/
#define WXRCTL_RST 0x1 /* receiver reset */
#define WXRCTL_EN 0x2 /* receiver enable */
#define WXRCTL_SBP 0x4 /* store bad packets */
#define WXRCTL_UPE 0x8 /* unicast promiscuos mode */
#define WXRCTL_MPE 0x10 /* multicast promiscuous mode */
#define WXRCTL_LPE 0x20 /* large packet enable */
#define WXRCTL_BAM 0x8000 /* broadcast accept mode */
#define WXRCTL_BSEX 0x2000000 /* LIVENGOOD: Buffer Size Extension */
#define WXRCTL_2KRBUF (0 << 16) /* 2KB Receive Buffers */
#define WXRCTL_1KRBUF (1 << 16) /* 1KB Receive Buffers */
#define WXRCTL_512BRBUF (2 << 16) /* 512 Byte Receive Buffers */
#define WXRCTL_256BRBUF (3 << 16) /* 256 Byte Receive Buffers */
#define WXRCTL_4KRBUF (3 << 16) /* LIVENGOOD: 4KB Receive Buffers */
#define WXRCTL_8KRBUF (2 << 16) /* LIVENGOOD: 8KB Receive Buffers */
#define WXRCTL_16KRBUF (1 << 16) /* LIVENGOOD: 16KB Receive Buffers */
/*
* Receive Delay Timer Register bits.
*/
#define WXRDTR_FPD 0x80000000 /* flush partial descriptor */
/*
* Transmit Configuration Word defines
*/
#define WXTXCW_FD 0x00000020 /* Full Duplex */
#define WXTXCW_PMASK 0x00000180 /* pause mask */
#define WXTXCW_ANE 0x80000000 /* AutoNegotiate */
#define WXTXCW_DEFAULT 0x800001A0
/*
* Transmit Control Register defines.
*/
#define WXTCTL_RST 0x1 /* transmitter reset */
#define WXTCTL_EN 0x2 /* transmitter enable */
#define WXTCTL_PSP 0x8 /* pad short packets */
#define WXTCTL_CT(x) (((x) & 0xff) << 4) /* 4:11 - Collision Threshold */
#define WXTCTL_COLD(x) (((x) & 0x3ff) << 12) /* 12:21 - Collision Distance */
#define WXTCTL_SWXOFF (1 << 22) /* Software XOFF */
#define WX_COLLISION_THRESHOLD 15
#define WX_FDX_COLLISION_DX 64
#define WX_HDX_COLLISION_DX 512
/*
* MDI control register bits - (best-guess)
*/
#define WXMDIC_WRITE 0x04000000
#define WXMDIC_READ 0x08000000
#define WXMDIC_READY 0x10000000
#define WXMDIC_INTR 0x20000000
#define WXMDIC_ERR 0x40000000
#define WXMDIC_REGADDR_MASK 0x001F0000
#define WXMDIC_REGADDR_SHIFT 16
#define WXMDIC_PHYADDR_MASK 0x03E00000
#define WXMDIC_PHYADDR_SHIFT 21
#define WXMDIC_DATA_MASK 0x0000FFFF
/*
* EXCT control register bits
*/
#define WXEXCT_GPI_EN0 0x00000001
#define WXEXCT_GPI_EN1 0x00000002
#define WXEXCT_GPI_EN2 0x00000004
#define WXEXCT_GPI_EN3 0x00000008
#define WXEXCT_SWDPIN4 0x00000010
#define WXEXCT_SWDPIN5 0x00000020
#define WXEXCT_SWDPIN6 0x00000040
#define WXEXCT_SWDPIN7 0x00000080
#define WXEXCT_SWDPIO4 0x00000100
#define WXEXCT_SWDPIO5 0x00000200
#define WXEXCT_SWDPIO6 0x00000400
#define WXEXCT_SWDPIO7 0x00000800
#define WXEXCT_ASDCHK 0x00001000
#define WXEXCT_EE_RST 0x00002000
#define WXEXCT_IPS 0x00004000
#define WXEXCT_SPD_BYPS 0x00008000
/*
* PHY access using GPIO pins
*/
#define WXPHY_RESET_DIR WXDCR_SWDPIO0
#define WXPHY_RESET WXDCR_SWDPIN0
#define WXPHY_MDIO_DIR WXDCR_SWDPIO2
#define WXPHY_MDIO WXDCR_SWDPIN2
#define WXPHY_MDC_DIR WXDCR_SWDPIO3
#define WXPHY_MDC WXDCR_SWDPIN3
#define WXPHY_RESET_DIR4 WXEXCT_SWDPIO4
#define WXPHY_RESET4 WXEXCT_SWDPIN4
/*
* PHY commands
*/
#define WXPHYC_PREAMBLE 0xFFFFFFFF
#define WXPHYC_PREAMBLE_LEN 32
#define WXPHYC_SOF 0x01
#define WXPHYC_READ 0x02
#define WXPHYC_WRITE 0x01
#define WXPHYC_TURNAROUND 0x02
/*
* Receive Configuration Word defines
*/
#define WXRXCW_CWMASK 0x0000ffff
#define WXRXCW_NC 0x04000000
#define WXRXCW_IV 0x08000000
#define WXRXCW_CC 0x10000000
#define WXRXCW_C 0x20000000
#define WXRXCW_SYNCH 0x40000000
#define WXRXCW_ANC 0x80000000
/*
* Miscellaneous
*/
#define WX_EEPROM_MAC_OFF 0
/*
* Offset for Initialization Control Word #1
*/
#define WX_EEPROM_CTLR1_OFF 0xA
#define WX_EEPROM_CTLR1_FD (1 << 10)
#define WX_EEPROM_CTLR1_SWDPIO_SHIFT 5
#define WX_EEPROM_CTLR1_ILOS (1 << 4)
#define WX_EEPROM_CTLR2_OFF 0xF
#define WX_EEPROM_CTLR2_SWDPIO 0xF0
#define WX_EEPROM_EXT_SHIFT 4
#define WX_XTIMER_DFLT 0x100
#define WX_RCV_FLOW_HI_DFLT 0x8000
#define WX_RCV_FLOW_LO_DFLT 0x4000
#define WX_WISEMAN_TIPG_DFLT (10 | (2 << 10) | (10 << 20))
#define WX_LIVENGOOD_TIPG_DFLT (6 | (8 << 10) | (6 << 20))
#define WX_LIVENGOOD_CU_TIPG_DFLT (8 | (8 << 10) | (6 << 20))
#define WX_CRC_LENGTH 4
/*
* Hardware cannot transmit less than 16 bytes. It also cannot
* successfully receive less than 60 bytes.
*/
#define WX_MIN_XPKT_SIZE 16
#define WX_MIN_RPKT_SIZE 60
#define WX_MAX_PKT_SIZE 1514
#define WX_MAX_PKT_SIZE_JUMBO 9014
Reference in New Issue View Git Blame Copy Permalink