1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-25 11:37:56 +00:00
freebsd/sys/net/sff8472.h
Alexander V. Chernikov c59adfc6a5 * Add new net/sff8436.h containing constants used to access
QSFP+ data via i2c inteface. These constants has been taken
  from SFF-8436 "QSFP+ 10 Gbs 4X PLUGGABLE TRANSCEIVER" standard
  rev 4.8.
* Add support for printing QSFP+ information from 40G NICs
  such as Chelsio T5.

This commit does not contain ioctl changes necessary for this
functionality work, there will be another commit soon.

Example:
cxl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=ec07bb<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,JUMBO_MTU,.....>
        ether 00:07:43:28:ad:08
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet 40Gbase-LR4 <full-duplex>
        status: active
        plugged: QSFP+ 40GBASE-LR4 (MPO Parallel Optic)
        vendor: OEM PN: OP-QSFP-40G-LR4 SN: 20140318001 DATE: 2014-03-18
        module temperature: 64.06 C voltage: 3.26 Volts
        lane 1: RX: 0.47 mW (-3.21 dBm) TX: 2.78 mW (4.46 dBm)
        lane 2: RX: 0.20 mW (-6.94 dBm) TX: 2.80 mW (4.47 dBm)
        lane 3: RX: 0.18 mW (-7.38 dBm) TX: 2.79 mW (4.47 dBm)
        lane 4: RX: 0.90 mW (-0.45 dBm) TX: 2.80 mW (4.48 dBm)

Tested on:	Chelsio T5
Tested on:	Mellanox/Huawei passive/active cables/transceivers.
MFC after:	2 weeks
Sponsored by:	Yandex LLC
2014-08-21 17:54:42 +00:00

501 lines
18 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*-
* Copyright (c) 2013 George V. Neville-Neil
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* The following set of constants are from Document SFF-8472
* "Diagnostic Monitoring Interface for Optical Transceivers" revision
* 11.3 published by the SFF Committee on June 11, 2013
*
* The SFF standard defines two ranges of addresses, each 255 bytes
* long for the storage of data and diagnostics on cables, such as
* SFP+ optics and TwinAx cables. The ranges are defined in the
* following way:
*
* Base Address 0xa0 (Identification Data)
* 0-95 Serial ID Defined by SFP MSA
* 96-127 Vendor Specific Data
* 128-255 Reserved
*
* Base Address 0xa2 (Diagnostic Data)
* 0-55 Alarm and Warning Thresholds
* 56-95 Cal Constants
* 96-119 Real Time Diagnostic Interface
* 120-127 Vendor Specific
* 128-247 User Writable EEPROM
* 248-255 Vendor Specific
*
* Note that not all addresses are supported. Where support is
* optional this is noted and instructions for checking for the
* support are supplied.
*
* All these values are read across an I2C (i squared C) bus. Any
* device wishing to read these addresses must first have support for
* i2c calls. The Chelsio T4/T5 driver (dev/cxgbe) is one such
* driver.
*/
/* Table 3.1 Two-wire interface ID: Data Fields */
enum {
SFF_8472_BASE = 0xa0, /* Base address for all our queries. */
SFF_8472_ID = 0, /* Transceiver Type (Table 3.2) */
SFF_8472_EXT_ID = 1, /* Extended transceiver type (Table 3.3) */
SFF_8472_CONNECTOR = 2, /* Connector type (Table 3.4) */
SFF_8472_TRANS_START = 3, /* Elec or Optical Compatibility
* (Table 3.5) */
SFF_8472_TRANS_END = 10,
SFF_8472_ENCODING = 11, /* Encoding Code for high speed
* serial encoding algorithm (see
* Table 3.6) */
SFF_8472_BITRATE = 12, /* Nominal signaling rate, units
* of 100MBd. (see details for
* rates > 25.0Gb/s) */
SFF_8472_RATEID = 13, /* Type of rate select
* functionality (see Table
* 3.6a) */
SFF_8472_LEN_SMF_KM = 14, /* Link length supported for single
* mode fiber, units of km */
SFF_8472_LEN_SMF = 15, /* Link length supported for single
* mode fiber, units of 100 m */
SFF_8472_LEN_50UM = 16, /* Link length supported for 50 um
* OM2 fiber, units of 10 m */
SFF_8472_LEN_625UM = 17, /* Link length supported for 62.5
* um OM1 fiber, units of 10 m */
SFF_8472_LEN_OM4 = 18, /* Link length supported for 50um
* OM4 fiber, units of 10m.
* Alternatively copper or direct
* attach cable, units of m */
SFF_8472_LEN_OM3 = 19, /* Link length supported for 50 um OM3 fiber, units of 10 m */
SFF_8472_VENDOR_START = 20, /* Vendor name [Address A0h, Bytes
* 20-35] */
SFF_8472_VENDOR_END = 35,
SFF_8472_TRANS = 36, /* Transceiver Code for electronic
* or optical compatibility (see
* Table 3.5) */
SFF_8472_VENDOR_OUI_START = 37, /* Vendor OUI SFP vendor IEEE
* company ID */
SFF_8472_VENDOR_OUI_END = 39,
SFF_8472_PN_START = 40, /* Vendor PN */
SFF_8472_PN_END = 55,
SFF_8472_REV_START = 56, /* Vendor Revision */
SFF_8472_REV_END = 59,
SFF_8472_WAVELEN_START = 60, /* Wavelength Laser wavelength
* (Passive/Active Cable
* Specification Compliance) */
SFF_8472_WAVELEN_END = 61,
SFF_8472_CC_BASE = 63, /* CC_BASE Check code for Base ID
* Fields (addresses 0 to 62) */
/*
* Extension Fields (optional) check the options before reading other
* addresses.
*/
SFF_8472_OPTIONS_MSB = 64, /* Options Indicates which optional
* transceiver signals are
* implemented */
SFF_8472_OPTIONS_LSB = 65, /* (see Table 3.7) */
SFF_8472_BR_MAX = 66, /* BR max Upper bit rate margin,
* units of % (see details for
* rates > 25.0Gb/s) */
SFF_8472_BR_MIN = 67, /* Lower bit rate margin, units of
* % (see details for rates >
* 25.0Gb/s) */
SFF_8472_SN_START = 68, /* Vendor SN [Address A0h, Bytes 68-83] */
SFF_8472_SN_END = 83,
SFF_8472_DATE_START = 84, /* Date code Vendors manufacturing
* date code (see Table 3.8) */
SFF_8472_DATE_END = 91,
SFF_8472_DIAG_TYPE = 92, /* Diagnostic Monitoring Type
* Indicates which type of
* diagnostic monitoring is
* implemented (if any) in the
* transceiver (see Table 3.9)
*/
SFF_8472_ENHANCED = 93, /* Enhanced Options Indicates which
* optional enhanced features are
* implemented (if any) in the
* transceiver (see Table 3.10) */
SFF_8472_COMPLIANCE = 94, /* SFF-8472 Compliance Indicates
* which revision of SFF-8472 the
* transceiver complies with. (see
* Table 3.12)*/
SFF_8472_CC_EXT = 95, /* Check code for the Extended ID
* Fields (addresses 64 to 94)
*/
SFF_8472_VENDOR_RSRVD_START = 96,
SFF_8472_VENDOR_RSRVD_END = 127,
SFF_8472_RESERVED_START = 128,
SFF_8472_RESERVED_END = 255
};
#define SFF_8472_DIAG_IMPL (1 << 6) /* Required to be 1 */
#define SFF_8472_DIAG_INTERNAL (1 << 5) /* Internal measurements. */
#define SFF_8472_DIAG_EXTERNAL (1 << 4) /* External measurements. */
#define SFF_8472_DIAG_POWER (1 << 3) /* Power measurement type */
#define SFF_8472_DIAG_ADDR_CHG (1 << 2) /* Address change required.
* See SFF-8472 doc. */
/*
* Diagnostics are available at the two wire address 0xa2. All
* diagnostics are OPTIONAL so you should check 0xa0 registers 92 to
* see which, if any are supported.
*/
enum {SFF_8472_DIAG = 0xa2}; /* Base address for diagnostics. */
/*
* Table 3.15 Alarm and Warning Thresholds All values are 2 bytes
* and MUST be read in a single read operation starting at the MSB
*/
enum {
SFF_8472_TEMP_HIGH_ALM = 0, /* Temp High Alarm */
SFF_8472_TEMP_LOW_ALM = 2, /* Temp Low Alarm */
SFF_8472_TEMP_HIGH_WARN = 4, /* Temp High Warning */
SFF_8472_TEMP_LOW_WARN = 6, /* Temp Low Warning */
SFF_8472_VOLTAGE_HIGH_ALM = 8, /* Voltage High Alarm */
SFF_8472_VOLTAGE_LOW_ALM = 10, /* Voltage Low Alarm */
SFF_8472_VOLTAGE_HIGH_WARN = 12, /* Voltage High Warning */
SFF_8472_VOLTAGE_LOW_WARN = 14, /* Voltage Low Warning */
SFF_8472_BIAS_HIGH_ALM = 16, /* Bias High Alarm */
SFF_8472_BIAS_LOW_ALM = 18, /* Bias Low Alarm */
SFF_8472_BIAS_HIGH_WARN = 20, /* Bias High Warning */
SFF_8472_BIAS_LOW_WARN = 22, /* Bias Low Warning */
SFF_8472_TX_POWER_HIGH_ALM = 24, /* TX Power High Alarm */
SFF_8472_TX_POWER_LOW_ALM = 26, /* TX Power Low Alarm */
SFF_8472_TX_POWER_HIGH_WARN = 28, /* TX Power High Warning */
SFF_8472_TX_POWER_LOW_WARN = 30, /* TX Power Low Warning */
SFF_8472_RX_POWER_HIGH_ALM = 32, /* RX Power High Alarm */
SFF_8472_RX_POWER_LOW_ALM = 34, /* RX Power Low Alarm */
SFF_8472_RX_POWER_HIGH_WARN = 36, /* RX Power High Warning */
SFF_8472_RX_POWER_LOW_WARN = 38, /* RX Power Low Warning */
SFF_8472_RX_POWER4 = 56, /* Rx_PWR(4) Single precision
* floating point calibration data
* - Rx optical power. Bit 7 of
* byte 56 is MSB. Bit 0 of byte
* 59 is LSB. Rx_PWR(4) should be
* set to zero for “internally
* calibrated” devices. */
SFF_8472_RX_POWER3 = 60, /* Rx_PWR(3) Single precision
* floating point calibration data
* - Rx optical power. Bit 7 of
* byte 60 is MSB. Bit 0 of byte 63
* is LSB. Rx_PWR(3) should be set
* to zero for “internally
* calibrated” devices.*/
SFF_8472_RX_POWER2 = 64, /* Rx_PWR(2) Single precision
* floating point calibration data,
* Rx optical power. Bit 7 of byte
* 64 is MSB, bit 0 of byte 67 is
* LSB. Rx_PWR(2) should be set to
* zero for “internally calibrated”
* devices. */
SFF_8472_RX_POWER1 = 68, /* Rx_PWR(1) Single precision
* floating point calibration data,
* Rx optical power. Bit 7 of byte
* 68 is MSB, bit 0 of byte 71 is
* LSB. Rx_PWR(1) should be set to
* 1 for “internally calibrated”
* devices. */
SFF_8472_RX_POWER0 = 72, /* Rx_PWR(0) Single precision
* floating point calibration data,
* Rx optical power. Bit 7 of byte
* 72 is MSB, bit 0 of byte 75 is
* LSB. Rx_PWR(0) should be set to
* zero for “internally calibrated”
* devices. */
SFF_8472_TX_I_SLOPE = 76, /* Tx_I(Slope) Fixed decimal
* (unsigned) calibration data,
* laser bias current. Bit 7 of
* byte 76 is MSB, bit 0 of byte 77
* is LSB. Tx_I(Slope) should be
* set to 1 for “internally
* calibrated” devices. */
SFF_8472_TX_I_OFFSET = 78, /* Tx_I(Offset) Fixed decimal
* (signed twos complement)
* calibration data, laser bias
* current. Bit 7 of byte 78 is
* MSB, bit 0 of byte 79 is
* LSB. Tx_I(Offset) should be set
* to zero for “internally
* calibrated” devices. */
SFF_8472_TX_POWER_SLOPE = 80, /* Tx_PWR(Slope) Fixed decimal
* (unsigned) calibration data,
* transmitter coupled output
* power. Bit 7 of byte 80 is MSB,
* bit 0 of byte 81 is LSB.
* Tx_PWR(Slope) should be set to 1
* for “internally calibrated”
* devices. */
SFF_8472_TX_POWER_OFFSET = 82, /* Tx_PWR(Offset) Fixed decimal
* (signed twos complement)
* calibration data, transmitter
* coupled output power. Bit 7 of
* byte 82 is MSB, bit 0 of byte 83
* is LSB. Tx_PWR(Offset) should be
* set to zero for “internally
* calibrated” devices. */
SFF_8472_T_SLOPE = 84, /* T (Slope) Fixed decimal
* (unsigned) calibration data,
* internal module temperature. Bit
* 7 of byte 84 is MSB, bit 0 of
* byte 85 is LSB. T(Slope) should
* be set to 1 for “internally
* calibrated” devices. */
SFF_8472_T_OFFSET = 86, /* T (Offset) Fixed decimal (signed
* twos complement) calibration
* data, internal module
* temperature. Bit 7 of byte 86 is
* MSB, bit 0 of byte 87 is LSB.
* T(Offset) should be set to zero
* for “internally calibrated”
* devices. */
SFF_8472_V_SLOPE = 88, /* V (Slope) Fixed decimal
* (unsigned) calibration data,
* internal module supply
* voltage. Bit 7 of byte 88 is
* MSB, bit 0 of byte 89 is
* LSB. V(Slope) should be set to 1
* for “internally calibrated”
* devices. */
SFF_8472_V_OFFSET = 90, /* V (Offset) Fixed decimal (signed
* twos complement) calibration
* data, internal module supply
* voltage. Bit 7 of byte 90 is
* MSB. Bit 0 of byte 91 is
* LSB. V(Offset) should be set to
* zero for “internally calibrated”
* devices. */
SFF_8472_CHECKSUM = 95, /* Checksum Byte 95 contains the
* low order 8 bits of the sum of
* bytes 0 94. */
/* Internal measurements. */
SFF_8472_TEMP = 96, /* Internally measured module temperature. */
SFF_8472_VCC = 98, /* Internally measured supply
* voltage in transceiver.
*/
SFF_8472_TX_BIAS = 100, /* Internally measured TX Bias Current. */
SFF_8472_TX_POWER = 102, /* Measured TX output power. */
SFF_8472_RX_POWER = 104, /* Measured RX input power. */
SFF_8472_STATUS = 110 /* See below */
};
/* Status Bits Described */
/*
* TX Disable State Digital state of the TX Disable Input Pin. Updated
* within 100ms of change on pin.
*/
#define SFF_8472_STATUS_TX_DISABLE (1 << 7)
/*
* Select Read/write bit that allows software disable of
* laser. Writing 1 disables laser. See Table 3.11 for
* enable/disable timing requirements. This bit is “OR”d with the hard
* TX_DISABLE pin value. Note, per SFP MSA TX_DISABLE pin is default
* enabled unless pulled low by hardware. If Soft TX Disable is not
* implemented, the transceiver ignores the value of this bit. Default
* power up value is zero/low.
*/
#define SFF_8472_STATUS_SOFT_TX_DISABLE (1 << 6)
/*
* RS(1) State Digital state of SFP input pin AS(1) per SFF-8079 or
* RS(1) per SFF-8431. Updated within 100ms of change on pin. See A2h
* Byte 118, Bit 3 for Soft RS(1) Select control information.
*/
#define SFF_8472_RS_STATE (1 << 5)
/*
* Rate_Select State [aka. “RS(0)”] Digital state of the SFP
* Rate_Select Input Pin. Updated within 100ms of change on pin. Note:
* This pin is also known as AS(0) in SFF-8079 and RS(0) in SFF-8431.
*/
#define SFF_8472_STATUS_SELECT_STATE (1 << 4)
/*
* Read/write bit that allows software rate select control. Writing
* 1 selects full bandwidth operation. This bit is “ORd with the
* hard Rate_Select, AS(0) or RS(0) pin value. See Table 3.11 for
* timing requirements. Default at power up is logic zero/low. If Soft
* Rate Select is not implemented, the transceiver ignores the value
* of this bit. Note: Specific transceiver behaviors of this bit are
* identified in Table 3.6a and referenced documents. See Table 3.18a,
* byte 118, bit 3 for Soft RS(1) Select.
*/
#define SFF_8472_STATUS_SOFT_RATE_SELECT (1 << 3)
/*
* TX Fault State Digital state of the TX Fault Output Pin. Updated
* within 100ms of change on pin.
*/
#define SFF_8472_STATUS_TX_FAULT_STATE (1 << 2)
/*
* Digital state of the RX_LOS Output Pin. Updated within 100ms of
* change on pin.
*/
#define SFF_8472_STATUS_RX_LOS (1 << 1)
/*
* Indicates transceiver has achieved power up and data is ready. Bit
* remains high until data is ready to be read at which time the
* device sets the bit low.
*/
#define SFF_8472_STATUS_DATA_READY (1 << 0)
/*
* Table 3.2 Identifier values.
* Identifier constants has taken from SFF-8024 rev 2.2 table 4.1
* (as referenced by table 3.2 footer)
* */
enum {
SFF_8024_ID_UNKNOWN = 0x0, /* Unknown or unspecified */
SFF_8024_ID_GBIC = 0x1, /* GBIC */
SFF_8024_ID_SFF = 0x2, /* Module soldered to motherboard (ex: SFF)*/
SFF_8024_ID_SFP = 0x3, /* SFP or SFP “Plus” */
SFF_8024_ID_XBI = 0x4, /* 300 pin XBI */
SFF_8024_ID_XENPAK = 0x5, /* Xenpak */
SFF_8024_ID_XFP = 0x6, /* XFP */
SFF_8024_ID_XFF = 0x7, /* XFF */
SFF_8024_ID_XFPE = 0x8, /* XFP-E */
SFF_8024_ID_XPAK = 0x9, /* XPAk */
SFF_8024_ID_X2 = 0xA, /* X2 */
SFF_8024_ID_DWDM_SFP = 0xB, /* DWDM-SFP */
SFF_8024_ID_QSFP = 0xC, /* QSFP */
SFF_8024_ID_QSFPPLUS = 0xD, /* QSFP+ */
SFF_8024_ID_CXP = 0xE, /* CXP */
SFF_8024_ID_HD4X = 0xF, /* Shielded Mini Multilane HD 4X */
SFF_8024_ID_HD8X = 0x10, /* Shielded Mini Multilane HD 8X */
SFF_8024_ID_QSFP28 = 0x11, /* QSFP28 */
SFF_8024_ID_CXP2 = 0x12, /* CXP2 (aka CXP28) */
SFF_8024_ID_LAST = SFF_8024_ID_CXP2
};
static const char *sff_8024_id[SFF_8024_ID_LAST + 1] = {"Unknown",
"GBIC",
"SFF",
"SFP/SFP+",
"XBI",
"Xenpak",
"XFP",
"XFF",
"XFP-E",
"XPAk",
"X2",
"DWDM-SFP",
"QSFP",
"QSFP+",
"CXP",
"HD4X",
"HD8X",
"QSFP28",
"CXP2"};
/* Keep compability with old definitions */
#define SFF_8472_ID_UNKNOWN SFF_8024_ID_UNKNOWN
#define SFF_8472_ID_GBIC SFF_8024_ID_GBIC
#define SFF_8472_ID_SFF SFF_8024_ID_SFF
#define SFF_8472_ID_SFP SFF_8024_ID_SFP
#define SFF_8472_ID_XBI SFF_8024_ID_XBI
#define SFF_8472_ID_XENPAK SFF_8024_ID_XENPAK
#define SFF_8472_ID_XFP SFF_8024_ID_XFP
#define SFF_8472_ID_XFF SFF_8024_ID_XFF
#define SFF_8472_ID_XFPE SFF_8024_ID_XFPE
#define SFF_8472_ID_XPAK SFF_8024_ID_XPAK
#define SFF_8472_ID_X2 SFF_8024_ID_X2
#define SFF_8472_ID_DWDM_SFP SFF_8024_ID_DWDM_SFP
#define SFF_8472_ID_QSFP SFF_8024_ID_QSFP
#define SFF_8472_ID_LAST SFF_8024_ID_LAST
#define sff_8472_id sff_8024_id
/*
* Table 3.9 Diagnostic Monitoring Type (byte 92)
* bits described.
*/
/*
* Digital diagnostic monitoring implemented.
* Set to 1 for transceivers implementing DDM.
*/
#define SFF_8472_DDM_DONE (1 << 6)
/*
* Measurements are internally calibrated.
*/
#define SFF_8472_DDM_INTERNAL (1 << 5)
/*
* Measurements are externally calibrated.
*/
#define SFF_8472_DDM_EXTERNAL (1 << 4)
/*
* Received power measurement type
* 0 = OMA, 1 = average power
*/
#define SFF_8472_DDM_PMTYPE (1 << 3)
/* Table 3.13 and 3.14 Temperature Conversion Values */
#define SFF_8472_TEMP_SIGN (1 << 15)
#define SFF_8472_TEMP_SHIFT 8
#define SFF_8472_TEMP_MSK 0xEF00
#define SFF_8472_TEMP_FRAC 0x00FF
/* Internal Callibration Conversion factors */
/*
* Represented as a 16 bit unsigned integer with the voltage defined
* as the full 16 bit value (0 65535) with LSB equal to 100 uVolt,
* yielding a total range of 0 to +6.55 Volts.
*/
#define SFF_8472_VCC_FACTOR 10000.0
/*
* Represented as a 16 bit unsigned integer with the current defined
* as the full 16 bit value (0 65535) with LSB equal to 2 uA,
* yielding a total range of 0 to 131 mA.
*/
#define SFF_8472_BIAS_FACTOR 2000.0
/*
* Represented as a 16 bit unsigned integer with the power defined as
* the full 16 bit value (0 65535) with LSB equal to 0.1 uW,
* yielding a total range of 0 to 6.5535 mW (~ -40 to +8.2 dBm).
*/
#define SFF_8472_POWER_FACTOR 10000.0