mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-19 10:53:58 +00:00
Code Issues Releases Activity
dd1290f033
freebsd/sys/dev/asr/osd_unix.h
Mike Smith ef137fd32f Add the 'asr' driver, supplied by Mark Salyzyn of Adaptec (nee DPT). 
This provides support for the Adaptec SCSI RAID controller family,
as well as the DPT SmartRAID V and VI families.

The driver will be maintained by Mark and Adaptec, and any changes
should be referred to the MAINTAINER.
2000-09-01 07:51:25 +00:00

591 lines
20 KiB
C
Raw Blame History

/* $FreeBSD$ */
/* BSDI osd_unix.h,v 1.7 1998/06/03 19:14:58 karels Exp */
/*
* Copyright (c) 1996-1999 Distributed Processing Technology Corporation
* All rights reserved.
*
* Redistribution and use in source form, with or without modification, are
* permitted provided that redistributions of source code must retain the
* above copyright notice, this list of conditions and the following disclaimer.
*
* This software is provided `as is' by Distributed Processing Technology and
* any express or implied warranties, including, but not limited to, the
* implied warranties of merchantability and fitness for a particular purpose,
* are disclaimed. In no event shall Distributed Processing Technology be
* liable for any direct, indirect, incidental, special, exemplary or
* consequential damages (including, but not limited to, procurement of
* substitute goods or services; loss of use, data, or profits; or business
* interruptions) however caused and on any theory of liability, whether in
* contract, strict liability, or tort (including negligence or otherwise)
* arising in any way out of the use of this driver software, even if advised
* of the possibility of such damage.
*
*/
#ifndef __OSD_UNIX_H
#define __OSD_UNIX_H
/*File - OSD_UNIX.H */
/*****************************************************************************/
/* */
/*Description: */
/* */
/* This file contains definitions for the UNIX OS dependent layer of the */
/*DPT engine. */
/* */
/*Copyright Distributed Processing Technology, Corp. */
/* 140 Candace Dr. */
/* Maitland, Fl. 32751 USA */
/* Phone: (407) 830-5522 Fax: (407) 260-5366 */
/* All Rights Reserved */
/* */
/*Author: Bob Pasteur */
/*Date: 5/28/93 */
/* */
/*Editors: */
/* 3/7/96 salyzyn@dpt.com */
/* Added BSDi extensions */
/* 30/9/99 salyzyn@dpt.com */
/* Added I2ORESCANCMD */
/* 7/12/99 salyzyn@dpt.com */
/* Added I2ORESETCMD */
/* */
/*Remarks: */
/* */
/* */
/*****************************************************************************/
/* Definitions - Defines & Constants ---------------------------------------*/
#define DPT_TurnAroundKey 0x01 /* TurnAround Message Type for engine */
#define DPT_EngineKey 0x02 /* Message Que and Type for engine */
#define DPT_LoggerKey 0x03 /* Message Type For Logger */
#define DPT_CommEngineKey 0x04 /* Message Que Type Created */
#define MSG_RECEIVE 0x40000000 /* Ored Into Logger PID For Return Msg */
#define ENGMSG_ECHO 0x00 /* Turnarround Echo Engine Message */
#define ENGMSG_OPEN 0x01 /* Turnarround Open Engine Message */
#define ENGMSG_CLOSE 0x02 /* Turnarround Close Engine Message */
/* Message Que Creation Flags */
#define MSG_URD 00400
#define MSG_UWR 00200
#define MSG_GRD 00040
#define MSG_GWR 00020
#define MSG_ORD 00004
#define MSG_OWR 00002
#define MSG_ALLRD 00444
#define MSG_ALLWR 00222
/* Message Que Creation Flags */
#define SHM_URD 00400
#define SHM_UWR 00200
#define SHM_GRD 00040
#define SHM_GWR 00020
#define SHM_ORD 00004
#define SHM_OWR 00002
#define SHM_ALLRD 00444
#define SHM_ALLWR 00222
/* Program Exit Codes */
#define ExitGoodStatus 0
#define ExitBadParameter 1
#define ExitSignalFail 3
#define ExitMsqAllocFail 5
#define ExitBuffAllocFail 6
#define ExitMsgSendFail 8
#define ExitMsgReceiveFail 9
#define ExitEngOpenFail 10
#define ExitDuplicateEngine 11
#define ExitCommAllocFail 12
#define ExitDuplicateCommEng 13
#define ExitCommConnectFail 14
#ifndef MAX_HAS
#define MAX_HAS 18
#define MAX_NAME 100
#endif /* ifndef MAX_HAS */
typedef struct {
uCHAR ConfigLength[4]; /* Len in bytes after this field. */
uCHAR EATAsignature[4];
uCHAR EATAversion;
uCHAR Flags1;
uCHAR PadLength[2];
uCHAR HBA[4];
uCHAR CPlength[4]; /* Command Packet Length */
uCHAR SPlength[4]; /* Status Packet Length */
uCHAR QueueSize[2]; /* Controller Que depth */
uCHAR SG_Size[4];
uCHAR Flags2;
uCHAR Reserved0; /* Reserved Field */
uCHAR Flags3;
uCHAR ScsiValues;
uCHAR MaxLUN; /* Maximun LUN Supported */
uCHAR Flags4;
uCHAR RaidNum; /* RAID HBA Number For Stripping */
uCHAR Reserved3; /* Reserved Field */
} DptReadConfig_t;
#if defined ( _DPT_SOLARIS )
#include <sys/types.h>
#include <sys/ddidmareq.h>
#include <sys/mutex.h>
#include <sys/scsi/scsi.h>
//#define _KERNEL
#include <sys/dditypes.h>
#include <sys/ddi_impldefs.h>
#include <sys/scsi/impl/transport.h>
//#undef _KERNEL
#undef MSG_DISCONNECT
#define MSG_DISCONNECT 0x11L
#define EATAUSRCMD 1
#define DPT_SIGNATURE 2
#define DPT_NUMCTRLS 3
#define DPT_CTRLINFO 4
#define DPT_SYSINFO 5
#define DPT_BLINKLED 6
#define I2OUSRCMD 7
//#define I2ORESCANCMD 8 /* Use DPT_IO_ACCESS instead */
//#define I2ORESETCMD 9 /* Use DPT_IO_ACCESS instead */
#define DPT_MAX_DMA_SEGS 32 /* Max used Scatter/Gather seg */
struct dpt_sg {
paddr_t data_addr;
uLONG data_len;
};
typedef struct {
uSHORT NumHBAs;
uLONG IOAddrs[18];
} GetHbaInfo_t;
#elif defined(_DPT_DGUX)
#ifndef _IOWR
# define _IOWR(x,y,z) (0x0fff3900|y)
#endif
#ifndef _IOW
# define _IOW(x,y,z) (0x0fff3900|y)
#endif
#ifndef _IOR
# define _IOR(x,y,z) (0x0fff3900|y)
#endif
#ifndef _IO
# define _IO(x,y) (0x0fff3900|y)
#endif
/* EATA PassThrough Command */
#define EATAUSRCMD _IOWR('D',65,EATA_CP)
/* Get Signature Structure */
#define DPT_SIGNATURE _IOR('D',67,dpt_sig_S)
/* Get Number Of DPT Adapters */
#define DPT_NUMCTRLS _IOR('D',68,int)
/* Get Adapter Info Structure */
#define DPT_CTRLINFO _IOR('D',69,CtrlInfo)
/* Get System Info Structure */
#define DPT_SYSINFO _IOR('D',72,sysInfo_S)
/* Get Blink LED Code */
#define DPT_BLINKLED _IOR('D',75,int)
/* Get Statistical information (if available) */
#define DPT_STATS_INFO _IOR('D',80,STATS_DATA)
/* Clear the statistical information */
#define DPT_STATS_CLEAR _IO('D',81)
/* Send an I2O command */
#define I2OUSRCMD _IO('D',76)
/* Inform driver to re-acquire LCT information */
#define I2ORESCANCMD _IO('D',77)
/* Inform driver to reset adapter */
#define I2ORESETCMD _IO('D',78)
#elif defined (SNI_MIPS)
/* Unix Ioctl Command definitions */
#define EATAUSRCMD (('D'<<8)|65)
#define DPT_DEBUG (('D'<<8)|66)
#define DPT_SIGNATURE (('D'<<8)|67)
#define DPT_NUMCTRLS (('D'<<8)|68)
#define DPT_CTRLINFO (('D'<<8)|69)
#define DPT_STATINFO (('D'<<8)|70)
#define DPT_CLRSTAT (('D'<<8)|71)
#define DPT_SYSINFO (('D'<<8)|72)
/* Set Timeout Value */
#define DPT_TIMEOUT (('D'<<8)|73)
/* Get config Data */
#define DPT_CONFIG (('D'<<8)|74)
/* Get config Data */
#define DPT_BLINKLED (('D'<<8)|75)
/* Get Statistical information (if available) */
#define DPT_STATS_INFO (('D'<<8)|80)
/* Clear the statistical information */
#define DPT_STATS_CLEAR (('D'<<8)|81)
/* Send an I2O command */
#define I2OUSRCMD (('D'<<8)|76)
/* Inform driver to re-acquire LCT information */
#define I2ORESCANCMD (('D'<<8)|77)
/* Inform driver to reset adapter */
#define I2ORESETCMD (('D'<<8)|78)
#else
/* Unix Ioctl Command definitions */
#ifdef _DPT_AIX
#undef _IOWR
#undef _IOW
#undef _IOR
#undef _IO
#endif
#ifndef _IOWR
# define _IOWR(x,y,z) (((x)<<8)|y)
#endif
#ifndef _IOW
# define _IOW(x,y,z) (((x)<<8)|y)
#endif
#ifndef _IOR
# define _IOR(x,y,z) (((x)<<8)|y)
#endif
#ifndef _IO
# define _IO(x,y) (((x)<<8)|y)
#endif
/* EATA PassThrough Command */
#define EATAUSRCMD _IOWR('D',65,EATA_CP)
/* Set Debug Level If Enabled */
#define DPT_DEBUG _IOW('D',66,int)
/* Get Signature Structure */
#define DPT_SIGNATURE _IOR('D',67,dpt_sig_S)
#if defined __bsdi__
#define DPT_SIGNATURE_PACKED _IOR('D',67,dpt_sig_S_Packed)
#endif
/* Get Number Of DPT Adapters */
#define DPT_NUMCTRLS _IOR('D',68,int)
/* Get Adapter Info Structure */
#define DPT_CTRLINFO _IOR('D',69,CtrlInfo)
/* Get Statistics If Enabled */
#define DPT_STATINFO _IO('D',70)
/* Clear Stats If Enabled */
#define DPT_CLRSTAT _IO('D',71)
/* Get System Info Structure */
#define DPT_SYSINFO _IOR('D',72,sysInfo_S)
/* Set Timeout Value */
#define DPT_TIMEOUT _IO('D',73)
/* Get config Data */
#define DPT_CONFIG _IO('D',74)
/* Get Blink LED Code */
#define DPT_BLINKLED _IOR('D',75,int)
/* Get Statistical information (if available) */
#define DPT_STATS_INFO _IOR('D',80,STATS_DATA)
/* Clear the statistical information */
#define DPT_STATS_CLEAR _IO('D',81)
/* Get Performance metrics */
#define DPT_PERF_INFO _IOR('D',82,dpt_perf_t)
/* Send an I2O command */
#define I2OUSRCMD _IO('D',76)
/* Inform driver to re-acquire LCT information */
#define I2ORESCANCMD _IO('D',77)
/* Inform driver to reset adapter */
#define I2ORESETCMD _IO('D',78)
#if defined _DPT_LINUX
/* See if the target is mounted */
#define DPT_TARGET_BUSY _IOR('D',79, TARGET_BUSY_T)
#endif
#endif /* _DPT_SOLARIS else */
/* Adapter Flags Field Bit Definitions */
#define CTLR_INSTALLED 0x00000001 /* Adapter Was Installed */
#define CTLR_DMA 0x00000002 /* DMA Supported */
#define CTLR_OVERLAP 0x00000004 /* Overlapped Commands Support */
#define CTLR_SECONDARY 0x00000008 /* I/O Address Not 0x1f0 */
#define CTLR_BLINKLED 0x00000010 /* Adapter In Blink LED State */
#define CTLR_HBACI 0x00000020 /* Cache Inhibit Supported */
#define CTLR_CACHE 0x00000040 /* Adapter Has Cache */
#define CTLR_SANE 0x00000080 /* Adapter Functioning OK */
#define CTLR_BUS_QUIET 0x00000100 /* Bus Quite On This Adapter */
#define CTLR_ABOVE_16 0x00000200 /* Support For Mem. Above 16 MB */
#define CTLR_SCAT_GATH 0x00000400 /* Scatter Gather Supported */
/* Definitions - Structure & Typedef ---------------------------------------*/
typedef struct {
uLONG MsgID;
DPT_TAG_T engineTag;
DPT_TAG_T targetTag;
DPT_MSG_T engEvent;
long BufferID;
uLONG FromEngBuffOffset;
uLONG callerID;
DPT_RTN_T result;
uLONG timeOut;
} MsgHdr;
#define MsgDataSize sizeof(MsgHdr) - 4
#ifndef SNI_MIPS
/*-------------------------------------------------------------------------*/
/* EATA Command Packet definition */
/*-------------------------------------------------------------------------*/
typedef struct EATACommandPacket {
#ifdef _DPT_UNIXWARE
uCHAR EataID[4];
uINT EataCmd;
uCHAR *CmdBuffer;
#endif /* _DPT_UNIXWARE */
#ifdef _DPT_AIX
uCHAR HbaTargetID;
uCHAR HbaLUN;
#endif /* _DPT_AIX */
uCHAR cp_Flags1; /* Command Flags */
uCHAR cp_Req_Len; /* AutoRequestSense Data length. */
uCHAR cp_Resv1[3]; /* Reserved Fields */
uCHAR cp_Flags2;
uCHAR cp_Flags3;
uCHAR cp_ScsiAddr;
uCHAR cp_msg0; /* Identify and Disconnect Message. */
uCHAR cp_msg1;
uCHAR cp_msg2;
uCHAR cp_msg3;
uCHAR cp_cdb[12]; /* SCSI cdb for command. */
uLONG cp_dataLen; /* Data length in Bytes for command. */
uLONG cp_Vue; /* Vendor Unique Area */
uCHAR *cp_DataAddr; /* Data Address For The Command. */
uCHAR *cp_SpAddr; /* Status Packet Physical Address. */
uCHAR *cp_SenseAddr; /* AutoRequestSense Data Phy Address. */
#ifdef _DPT_SOLARIS
uCHAR HostStatus;
uCHAR TargetStatus;
uCHAR CdbLength;
uCHAR SG_Size;
struct scsi_arq_status ReqSenseData;
struct dpt_sg SG_List[DPT_MAX_DMA_SEGS];
union {
char *b_scratch;
struct scsi_cmd *b_ownerp;
} cc;
paddr_t ccb_paddr;
uSHORT IOAddress;
#else /* _DPT_SOLARIS */
uLONG TimeOut ;
uCHAR HostStatus;
uCHAR TargetStatus;
uCHAR Retries;
#endif /* _DPT_SOLARIS else */
} EATA_CP;
#endif // SNI_MIPS
/* Control Flags 1 Definitions */
#define SCSI_RESET 0x01 /* Cause a SCSI Bus reset on the cmd */
#define HBA_INIT 0x02 /* Cause Controller to reInitialize */
#define AUTO_REQ_SENSE 0x04 /* Do Auto Request Sense on errors */
#define SCATTER_GATHER 0x08 /* Data Ptr points to a SG Packet */
#define INTERPRET 0x20 /* Interpret the SCSI cdb of own use */
#define DATA_OUT 0x04 /* Data Out phase with command */
#define DATA_IN 0x08 /* Data In phase with command */
/* Control Flags 2 Definitions */
#define FIRMWARE_NESTED 0x01
/* Control Flags 3 Definitions */
#define PHYSICAL_UNIT 0x01 /* Send Command Directly To Target */
#define IAT 0x02 /* Inhibit Address Translation */
#define HBACI 0x04 /* Inhibit Caching */
/* Structure Returned From Get Controller Info */
typedef struct {
uCHAR state; /* Operational state */
uCHAR id; /* Host adapter SCSI id */
int vect; /* Interrupt vector number */
int base; /* Base I/O address */
int njobs; /* # of jobs sent to HA */
int qdepth; /* Controller queue depth. */
int wakebase; /* mpx wakeup base index. */
uLONG SGsize; /* Scatter/Gather list size. */
unsigned heads; /* heads for drives on cntlr. */
unsigned sectors; /* sectors for drives on cntlr. */
uCHAR do_drive32; /* Flag for Above 16 MB Ability */
uCHAR BusQuiet; /* SCSI Bus Quiet Flag */
char idPAL[4]; /* 4 Bytes Of The ID Pal */
uCHAR primary; /* 1 For Primary, 0 For Secondary */
uCHAR eataVersion; /* EATA Version */
uLONG cpLength; /* EATA Command Packet Length */
uLONG spLength; /* EATA Status Packet Length */
uCHAR drqNum; /* DRQ Index (0,5,6,7) */
uCHAR flag1; /* EATA Flags 1 (Byte 9) */
uCHAR flag2; /* EATA Flags 2 (Byte 30) */
} CtrlInfo;
#ifndef SNI_MIPS
#ifdef _DPT_UNIXWARE
typedef struct {
uINT state; /* Operational state */
uCHAR id[4]; /* Host adapter SCSI id */
uINT vect; /* Interrupt vector number */
uLONG base; /* Base I/O address */
int ha_max_jobs; /* Max number of Active Jobs */
uLONG ha_cacheParams;
int ha_nbus; /* Number Of Busses on HBA */
int ha_ntargets; /* Number Of Targets Supported */
int ha_nluns; /* Number Of LUNs Supported */
int ha_tshift; /* Shift value for target */
int ha_bshift; /* Shift value for bus */
uINT ha_npend; /* # of jobs sent to HA */
int ha_active_jobs; /* Number Of Active Jobs */
} HbaInfo;
/* SDI ioctl prefix for hba specific ioctl's */
#define SDI_IOC (('S'<<24)|('D'<<16)|('I'<<8))
#define SDI_HBANAME ((SDI_IOC)|0x14) /* Get HBA module name */
#define SDI_SEND 0x0081 /* Send a SCSI command */
#else
typedef struct {
uLONG flags; /* Operational State Flags */
uCHAR id[4]; /* Host Adapter SCSI ID */
int vect; /* Interrupt Vector Number */
int base; /* Base I/O Address */
int njobs; /* # Of CCBs Outstanding To HBA */
int qdepth; /* Controller Queue depth. */
uLONG SGsize; /* Scatter/Gather List Size. */
char idPAL[4]; /* 4 Bytes Of The ID Pal */
uCHAR eataVersion; /* EATA Version */
uLONG cpLength; /* EATA Command Packet Length */
uLONG spLength; /* EATA Status Packet Length */
uCHAR drqNum; /* DRQ Index (0,5,6,7) */
uCHAR eataflag1; /* EATA Flags 1 (Byte 9) */
uCHAR eataflag2; /* EATA Flags 2 (Byte 30) */
uCHAR maxChannel; /* Maximum Channel Number */
uCHAR maxID; /* Maximum Target ID */
uCHAR maxLUN; /* Maximum LUN */
uCHAR HbaBusType; /* HBA Bus Type, EISA, PCI, etc */
uCHAR RaidNum; /* Host Adapter RAID Number */
} HbaInfo;
#endif /* _DPT_UNIXWARE */
#endif // SNI_MIPS
#ifdef _DPT_AIX
/*
* DPT Host Adapter config information structure - this structure contains
* configuration information about an adapter. It is imbedded into the
* dpt_ctl structure.
*/
typedef struct dpt_cfg {
uchar flags; /* Operational state flags */
uchar id[4]; /* Host adapter SCSI IDs */
int vect; /* Interrupt vector number */
ulong base_addr; /* Base I/O address */
int qdepth; /* Controller queue depth. */
ulong SGsize; /* Max scatter/gather list sz */
ulong SGmax; /* Max s/g we can use per req */
uchar eataVersion; /* EATA version */
ushort cpPadLen; /* # of pad bytes sent to HA for
PIO commands */
ulong cpLength; /* EATA Command Packet length */
ulong spLength; /* EATA Status Packet length */
uchar eataflag1; /* EATA Flags 1 (Byte 9) */
uchar eataflag2; /* EATA Flags 2 (Byte 30) */
uchar maxChan; /* Maximum Channel number */
uchar maxID; /* Maximum target ID */
uchar maxLUN; /* Maximum LUN */
uchar HbaBusType; /* HBA bus type, EISA, PCI, etc */
uchar RaidNum; /* Host adapter RAID number */
} DptCfg_t;
#endif /* _DPT_AIX */
#define MAX_ELEMENT_COUNT 64
#define MAX_BUCKET_COUNT 10
/*
* DPT statistics structure definitions
*/
typedef struct IO_SIZE_STATS
{
uLONG TotalIoCount;
uLONG IoCountRead;
uLONG IoCountReadSg;
uLONG IoCountWrite;
uLONG IoCountWriteSg;
uLONG UnalignedIoAddress;
uLONG SgElementCount[MAX_ELEMENT_COUNT];
} IO_SIZE_STATS_T, *pIO_SIZE_STATS_T;
typedef struct STATS_DATA
{
uLONG TotalIoCount;
uLONG TotalUnCachedIoCount;
uLONG MaxOutstandingIoCount;
uLONG CurrentOutstandingIoCount;
uLONG OutstandingIoRunningCount;
uLONG UnalignedPktCount;
uLONG UnalignedSgCount;
uLONG NonPageListAddressSgCount;
uLONG MaxMessagesPerInterrupt;
IO_SIZE_STATS_T IoSize[MAX_BUCKET_COUNT];
} STATS_DATA_T, *pSTATS_DATA_T;
typedef struct TARGET_BUSY
{
uLONG channel;
uLONG id;
uLONG lun;
uLONG isBusy;
} TARGET_BUSY_T;
#endif /* __OSD_UNIX_H */
Reference in New Issue View Git Blame Copy Permalink