1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-26 11:47:31 +00:00
freebsd/sys/dev/acpica
John Baldwin 9bf4c9c1b0 First cut at MI support for PCI Message Signalled Interrupts (MSI):
- Add 3 new functions to the pci_if interface along with suitable wrappers
  to provide the device driver visible API:
  - pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI().  '*count'
    here is an in and out parameter.  The driver stores the desired number
    of messages in '*count' before calling the function.  On success,
    '*count' holds the number of messages allocated to the device.  Also on
    success, the driver can access the messages as SYS_RES_IRQ resources
    starting at rid 1.  Note that the legacy INTx interrupt resource will
    not be available when using MSI.  Note that this function will allocate
    either MSI or MSI-X messages depending on the devices capabilities and
    the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables.  Also note
    that the driver should activate the memory resource that holds the
    MSI-X table and pending bit array (PBA) before calling this function
    if the device supports MSI-X.
  - pci_release_msi(dev) backed by PCI_RELEASE_MSI().  This function
    releases the messages allocated for this device.  All of the
    SYS_RES_IRQ resources need to be released for this function to succeed.
  - pci_msi_count(dev) backed by PCI_MSI_COUNT().  This function returns
    the maximum number of MSI or MSI-X messages supported by this device.
    MSI-X is preferred if present, but this function will honor the
    'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables.  This function
    should return the largest value that pci_alloc_msi() can return
    (assuming the MD code is able to allocate sufficient backing resources
    for all of the messages).
- Add default implementations for these 3 methods to the pci_driver generic
  PCI bus driver.  (The various other PCI bus drivers such as for ACPI and
  OFW will inherit these default implementations.)  This default
  implementation depends on 4 new pcib_if methods that bubble up through
  the PCI bridges to the MD code to allocate IRQ values and perform any
  needed MD setup code needed:
  - PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages.
  - PCIB_RELEASE_MSI() releases a group of MSI messages.
  - PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message.
  - PCIB_RELEASE_MSIX() releases a single MSI-X message.
- Add default implementations for these 4 methods that just pass the
  request up to the parent bus's parent bridge driver and use the
  default implementation in the various MI PCI bridge drivers.
- Add MI functions for use by MD code when managing MSI and MSI-X
  interrupts:
  - pci_enable_msi(dev, address, data) programs the MSI capability address
    and data registers for a group of MSI messages
  - pci_enable_msix(dev, index, address, data) initializes a single MSI-X
    message in the MSI-X table
  - pci_mask_msix(dev, index) masks a single MSI-X message
  - pci_unmask_msix(dev, index) unmasks a single MSI-X message
  - pci_pending_msix(dev, index) returns true if the specified MSI-X
    message is currently pending
- Save the MSI capability address and data registers in the pci_cfgreg
  block in a PCI devices ivars and restore the values when a device is
  resumed.  Note that the MSI-X table is not currently restored during
  resume.
- Add constants for MSI-X register offsets and fields.
- Record interesting data about any MSI-X capability blocks we come
  across in the pci_cfgreg block in the ivars for PCI devices.

Tested on:	em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X)
Reviewed by:	scottl, grehan, jfv
MFC after:	2 months
2006-11-13 21:47:30 +00:00
..
Osd Disable an overly-verbose warning message by default. 2006-09-24 09:39:17 +00:00
acpi_acad.c Invert the check logic. No functional change, but I prefer this version. 2005-10-24 18:30:57 +00:00
acpi_battery.c Minor sysctl cleanup. The RW flag means read|write and so it is redundant 2006-06-10 08:04:38 +00:00
acpi_button.c Canonize the include of acpi.h. 2005-09-11 18:39:03 +00:00
acpi_cmbat.c Oops, untested code was included accidentally. 2006-04-15 16:10:53 +00:00
acpi_cpu.c If we're trying to use C2/3 and reads from the register are returning 2005-10-25 21:15:47 +00:00
acpi_dock.c Remove the global dock variable. Each dock device should be able to 2006-08-08 01:33:03 +00:00
acpi_ec.c Revert two changes I was testing regarding polling delay. 2005-12-06 14:51:55 +00:00
acpi_hpet.c Raise the quality of the HPET timer to 2000 so it will be the preferred 2006-08-11 17:12:16 +00:00
acpi_if.m Canonize the include of acpi.h. 2005-09-11 18:39:03 +00:00
acpi_isab.c Canonize the include of acpi.h. 2005-09-11 18:39:03 +00:00
acpi_lid.c Canonize the include of acpi.h. 2005-09-11 18:39:03 +00:00
acpi_package.c Canonize the include of acpi.h. 2005-09-11 18:39:03 +00:00
acpi_pci_link.c Reformat the bootverbose messages that dump out the status of pci_link 2006-11-09 18:01:20 +00:00
acpi_pci.c Fixup some comments to allow for the fact that PCI domains are not specific 2006-05-11 22:13:21 +00:00
acpi_pcib_acpi.c First cut at MI support for PCI Message Signalled Interrupts (MSI): 2006-11-13 21:47:30 +00:00
acpi_pcib_pci.c First cut at MI support for PCI Message Signalled Interrupts (MSI): 2006-11-13 21:47:30 +00:00
acpi_pcib.c Force any hardwire-routed interrupts to level trigger and active low 2005-12-03 21:17:17 +00:00
acpi_pcibvar.h Protect against multiple includes and use _KERNEL to protect the PCI fns. 2005-02-28 05:39:34 +00:00
acpi_perf.c Eliminate duplicate p-states entries 2006-07-15 17:34:03 +00:00
acpi_powerres.c Remove unnecessary assignment. 2006-04-21 19:06:29 +00:00
acpi_quirk.c Canonize the include of acpi.h. 2005-09-11 18:39:03 +00:00
acpi_quirks Add a quirk for a motherboard whose acpi timer runs too fast. 2005-06-26 18:19:14 +00:00
acpi_resource.c Don't attach special devices in the order they appear in the AML tree. 2006-05-07 03:28:10 +00:00
acpi_smbat.c Remove unused variable. 2006-02-21 03:16:58 +00:00
acpi_smbus.h Import ACPI smart battery support. Newer systems (Acer, mostly) do not 2005-10-23 00:20:13 +00:00
acpi_thermal.c Support Celsius (nn.nC), Fahrenheit (nn.nF) and Kelvin (nnnn) to 2006-09-03 15:10:04 +00:00
acpi_throttle.c Remove unused variable. 2006-02-21 03:15:26 +00:00
acpi_timer.c Canonize the include of acpi.h. 2005-09-11 18:39:03 +00:00
acpi_video.c Improve the way we'll detect video devices as per ACPI 3.0. 2006-08-10 13:18:02 +00:00
acpi.c Fix a sign bug in acpi_release_resource(). acpi_sysres_find() returns != 2006-09-21 18:56:03 +00:00
acpiio.h Cleanups and support code for importing smart battery support. 2005-10-23 00:16:41 +00:00
acpivar.h Add a new sysctl, hw.acpi.handle_reboot. If set, acpi will attempt to 2006-07-29 21:46:16 +00:00