mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-24 11:29:10 +00:00
7e310d2d50
driver name and NIC driver softc via the device(9) tree, instead of going dirty through the ifnet(9) layer. Differential Revision: D1506 Reviewed by: imp, jhb
326 lines
9.1 KiB
C
326 lines
9.1 KiB
C
/* $NetBSD: nsphy.c,v 1.18 1999/07/14 23:57:36 thorpej Exp $ */
|
|
|
|
/*-
|
|
* Copyright (c) 1998, 1999 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
|
|
* NASA Ames Research Center.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/*-
|
|
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* driver for National Semiconductor's DP83840A ethernet 10/100 PHY
|
|
* Data Sheet available from www.national.com
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_var.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
#include "miidevs.h"
|
|
|
|
#include <dev/mii/nsphyreg.h>
|
|
|
|
#include "miibus_if.h"
|
|
|
|
static int nsphy_probe(device_t);
|
|
static int nsphy_attach(device_t);
|
|
|
|
static device_method_t nsphy_methods[] = {
|
|
/* device interface */
|
|
DEVMETHOD(device_probe, nsphy_probe),
|
|
DEVMETHOD(device_attach, nsphy_attach),
|
|
DEVMETHOD(device_detach, mii_phy_detach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static devclass_t nsphy_devclass;
|
|
|
|
static driver_t nsphy_driver = {
|
|
"nsphy",
|
|
nsphy_methods,
|
|
sizeof(struct mii_softc)
|
|
};
|
|
|
|
DRIVER_MODULE(nsphy, miibus, nsphy_driver, nsphy_devclass, 0, 0);
|
|
|
|
static int nsphy_service(struct mii_softc *, struct mii_data *, int);
|
|
static void nsphy_status(struct mii_softc *);
|
|
static void nsphy_reset(struct mii_softc *);
|
|
|
|
static const struct mii_phydesc nsphys[] = {
|
|
MII_PHY_DESC(xxNATSEMI, DP83840),
|
|
MII_PHY_END
|
|
};
|
|
|
|
static const struct mii_phy_funcs nsphy_funcs = {
|
|
nsphy_service,
|
|
nsphy_status,
|
|
nsphy_reset
|
|
};
|
|
|
|
static int
|
|
nsphy_probe(device_t dev)
|
|
{
|
|
|
|
return (mii_phy_dev_probe(dev, nsphys, BUS_PROBE_DEFAULT));
|
|
}
|
|
|
|
static int
|
|
nsphy_attach(device_t dev)
|
|
{
|
|
u_int flags;
|
|
|
|
flags = MIIF_NOMANPAUSE;
|
|
/*
|
|
* Am79C971 wedge when isolating all of their external PHYs.
|
|
*/
|
|
if (mii_dev_mac_match(dev,"pcn"))
|
|
flags |= MIIF_NOISOLATE;
|
|
mii_phy_dev_attach(dev, flags, &nsphy_funcs, 1);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
nsphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
|
|
{
|
|
int reg;
|
|
|
|
switch (cmd) {
|
|
case MII_POLLSTAT:
|
|
break;
|
|
|
|
case MII_MEDIACHG:
|
|
reg = PHY_READ(sc, MII_NSPHY_PCR);
|
|
|
|
/*
|
|
* Set up the PCR to use LED4 to indicate full-duplex
|
|
* in both 10baseT and 100baseTX modes.
|
|
*/
|
|
reg |= PCR_LED4MODE;
|
|
|
|
/*
|
|
* Make sure Carrier Integrity Monitor function is
|
|
* disabled (normal for Node operation, but sometimes
|
|
* it's not set?!)
|
|
*/
|
|
reg |= PCR_CIMDIS;
|
|
|
|
/*
|
|
* Make sure "force link good" is set to normal mode.
|
|
* It's only intended for debugging.
|
|
*/
|
|
reg |= PCR_FLINK100;
|
|
|
|
/*
|
|
* Mystery bits which are supposedly `reserved',
|
|
* but we seem to need to set them when the PHY
|
|
* is connected to some interfaces:
|
|
*
|
|
* 0x0400 is needed for fxp
|
|
* (Intel EtherExpress Pro 10+/100B, 82557 chip)
|
|
* (nsphy with a DP83840 chip)
|
|
* 0x0100 may be needed for some other card
|
|
*/
|
|
reg |= 0x0100 | 0x0400;
|
|
|
|
if (mii_phy_mac_match(sc, "fxp"))
|
|
PHY_WRITE(sc, MII_NSPHY_PCR, reg);
|
|
|
|
mii_phy_setmedia(sc);
|
|
break;
|
|
|
|
case MII_TICK:
|
|
if (mii_phy_tick(sc) == EJUSTRETURN)
|
|
return (0);
|
|
break;
|
|
}
|
|
|
|
/* Update the media status. */
|
|
PHY_STATUS(sc);
|
|
|
|
/* Callback if something changed. */
|
|
mii_phy_update(sc, cmd);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
nsphy_status(struct mii_softc *sc)
|
|
{
|
|
struct mii_data *mii = sc->mii_pdata;
|
|
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
|
|
int bmsr, bmcr, par, anlpar;
|
|
|
|
mii->mii_media_status = IFM_AVALID;
|
|
mii->mii_media_active = IFM_ETHER;
|
|
|
|
bmsr = PHY_READ(sc, MII_BMSR) |
|
|
PHY_READ(sc, MII_BMSR);
|
|
if (bmsr & BMSR_LINK)
|
|
mii->mii_media_status |= IFM_ACTIVE;
|
|
|
|
bmcr = PHY_READ(sc, MII_BMCR);
|
|
if (bmcr & BMCR_ISO) {
|
|
mii->mii_media_active |= IFM_NONE;
|
|
mii->mii_media_status = 0;
|
|
return;
|
|
}
|
|
|
|
if (bmcr & BMCR_LOOP)
|
|
mii->mii_media_active |= IFM_LOOP;
|
|
|
|
if (bmcr & BMCR_AUTOEN) {
|
|
/*
|
|
* The PAR status bits are only valid if autonegotiation
|
|
* has completed (or it's disabled).
|
|
*/
|
|
if ((bmsr & BMSR_ACOMP) == 0) {
|
|
/* Erg, still trying, I guess... */
|
|
mii->mii_media_active |= IFM_NONE;
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Argh. The PAR doesn't seem to indicate duplex mode
|
|
* properly! Determine media based on link partner's
|
|
* advertised capabilities.
|
|
*/
|
|
if (PHY_READ(sc, MII_ANER) & ANER_LPAN) {
|
|
anlpar = PHY_READ(sc, MII_ANAR) &
|
|
PHY_READ(sc, MII_ANLPAR);
|
|
if (anlpar & ANLPAR_TX_FD)
|
|
mii->mii_media_active |= IFM_100_TX|IFM_FDX;
|
|
else if (anlpar & ANLPAR_T4)
|
|
mii->mii_media_active |= IFM_100_T4|IFM_HDX;
|
|
else if (anlpar & ANLPAR_TX)
|
|
mii->mii_media_active |= IFM_100_TX|IFM_HDX;
|
|
else if (anlpar & ANLPAR_10_FD)
|
|
mii->mii_media_active |= IFM_10_T|IFM_FDX;
|
|
else if (anlpar & ANLPAR_10)
|
|
mii->mii_media_active |= IFM_10_T|IFM_HDX;
|
|
else
|
|
mii->mii_media_active |= IFM_NONE;
|
|
if ((mii->mii_media_active & IFM_FDX) != 0)
|
|
mii->mii_media_active |=
|
|
mii_phy_flowstatus(sc);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Link partner is not capable of autonegotiation.
|
|
* We will never be in full-duplex mode if this is
|
|
* the case, so reading the PAR is OK.
|
|
*/
|
|
par = PHY_READ(sc, MII_NSPHY_PAR);
|
|
if (par & PAR_10)
|
|
mii->mii_media_active |= IFM_10_T;
|
|
else
|
|
mii->mii_media_active |= IFM_100_TX;
|
|
mii->mii_media_active |= IFM_HDX;
|
|
} else
|
|
mii->mii_media_active = ife->ifm_media;
|
|
}
|
|
|
|
static void
|
|
nsphy_reset(struct mii_softc *sc)
|
|
{
|
|
struct ifmedia_entry *ife = sc->mii_pdata->mii_media.ifm_cur;
|
|
int reg, i;
|
|
|
|
if (sc->mii_flags & MIIF_NOISOLATE)
|
|
reg = BMCR_RESET;
|
|
else
|
|
reg = BMCR_RESET | BMCR_ISO;
|
|
PHY_WRITE(sc, MII_BMCR, reg);
|
|
|
|
/*
|
|
* It is best to allow a little time for the reset to settle
|
|
* in before we start polling the BMCR again. Notably, the
|
|
* DP83840A manuals state that there should be a 500us delay
|
|
* between asserting software reset and attempting MII serial
|
|
* operations. Be conservative.
|
|
*/
|
|
DELAY(1000);
|
|
|
|
/*
|
|
* Wait another 2s for it to complete.
|
|
* This is only a little overkill as under normal circumstances
|
|
* the PHY can take up to 1s to complete reset.
|
|
* This is also a bit odd because after a reset, the BMCR will
|
|
* clear the reset bit and simply reports 0 even though the reset
|
|
* is not yet complete.
|
|
*/
|
|
for (i = 0; i < 1000; i++) {
|
|
reg = PHY_READ(sc, MII_BMCR);
|
|
if (reg != 0 && (reg & BMCR_RESET) == 0)
|
|
break;
|
|
DELAY(2000);
|
|
}
|
|
|
|
if ((sc->mii_flags & MIIF_NOISOLATE) == 0) {
|
|
if ((ife == NULL && sc->mii_inst != 0) ||
|
|
(ife != NULL && IFM_INST(ife->ifm_media) != sc->mii_inst))
|
|
PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
|
|
}
|
|
}
|