Adrian Chadd d7cc11edce Configure larger TX FIFO default and maximum level values. ... This has reduced the number of TX delimiter and data underruns when doing large UDP transfers (>100mbit). This stops any HAL_INT_TXURN interrupts from occuring, which is a good sign! Obtained from: Qualcomm Atheros		2013-02-20 12:14:49 +00:00
..
ath_dfs/null	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
ath_hal	Configure larger TX FIFO default and maximum level values.	2013-02-20 12:14:49 +00:00
ath_rate	I've had some feedback that CCK rates are more reliable than MCS 0	2012-10-31 06:35:50 +00:00
ah_osdep.c
ah_osdep.h	Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.	2012-08-05 10:12:27 +00:00
if_ath_ahb.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_alq.c	Extend the timestamp to be a timeval, rather than ticks.	2013-02-11 02:48:49 +00:00
if_ath_alq.h	Fix an incorrect sizeof()	2013-02-18 18:39:15 +00:00
if_ath_beacon.c	Add a quick work-around if ath_beacon_config() to not die if it's called	2013-01-17 16:26:40 +00:00
if_ath_beacon.h	Extend the beacon code slightly to support AP mode beaconing for the	2012-08-11 23:26:19 +00:00
if_ath_debug.c	TX EDMA debugging fixes:	2012-11-05 07:08:45 +00:00
if_ath_debug.h	Add a debug method to dump the EDMA TX status descriptor contents out.	2012-11-03 04:53:44 +00:00
if_ath_keycache.c	Don't allocate or program a key for the AR5210.	2012-11-19 23:54:05 +00:00
if_ath_keycache.h
if_ath_led.c
if_ath_led.h
if_ath_misc.h	Pull out the if_transmit() work and revert back to ath_start().	2013-02-13 05:32:19 +00:00
if_ath_pci.c	Create a new TX lock specifically for queuing frames.	2013-02-07 07:50:16 +00:00
if_ath_rx_edma.c	Mechanically substitute flags from historic mbuf allocator with	2012-12-04 09:32:43 +00:00
if_ath_rx_edma.h	Begin abstracting out the RX path in preparation for RX EDMA support.	2012-07-03 06:59:12 +00:00
if_ath_rx.c	* Reduce the PCU lock overhead a little by only re-acquiring it if we	2013-02-16 19:11:57 +00:00
if_ath_rx.h	Convert sc_rxpending to a per-EDMA queue, and use that for the legacy code.	2012-07-10 00:02:19 +00:00
if_ath_spectral.c	Fix format size.	2013-01-08 22:42:15 +00:00
if_ath_spectral.h	Add a new (skeleton) spectral mode manager module.	2013-01-02 03:59:02 +00:00
if_ath_sysctl.c	Implement frame (data) transmission using if_transmit(), rather than	2013-01-15 18:01:23 +00:00
if_ath_sysctl.h
if_ath_tdma.c	Pull out the debugging code from the critical path and make sure it	2012-11-28 01:55:22 +00:00
if_ath_tdma.h
if_ath_tsf.h
if_ath_tx_edma.c	Methodize the process of adding the software TX queue to the taskqueue.	2013-02-07 02:15:25 +00:00
if_ath_tx_edma.h	Begin separating out the TX DMA setup in preparation for TX EDMA support.	2012-07-23 03:52:18 +00:00
if_ath_tx_ht.c	Fix a corner case that I noticed with the AR5416 (and it's currently	2013-02-08 09:07:03 +00:00
if_ath_tx_ht.h
if_ath_tx.c	A couple of quick tidyups:	2013-02-20 11:22:44 +00:00
if_ath_tx.h	ALQ logging enhancements:	2012-11-16 19:57:16 +00:00
if_ath.c	Enable TX FIFO underrun interrupts. This allows the TX FIFO threshold	2013-02-20 11:20:51 +00:00
if_athdfs.h	Add a method to explicitly disable radar reporting if required.	2013-01-02 01:36:10 +00:00
if_athioctl.h	Add support for triggering spectral scan upon a channel reset/change.	2013-01-08 22:15:13 +00:00
if_athrate.h	Create an ioctl API for fetching the current rate control information.	2012-07-20 01:27:20 +00:00
if_athvar.h	Pull out the if_transmit() work and revert back to ath_start().	2013-02-13 05:32:19 +00:00