1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00
freebsd/usr.bin/doscmd/int10.c
2002-03-07 12:52:27 +00:00

467 lines
12 KiB
C

/*
* Copyright (c) 1992, 1993, 1996
* Berkeley Software Design, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Berkeley Software
* Design, Inc.
*
* THIS SOFTWARE IS PROVIDED BY Berkeley Software Design, Inc. ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Berkeley Software Design, Inc. BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* BSDI int10.c,v 2.3 1996/04/08 19:32:40 bostic Exp
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <unistd.h>
#include "doscmd.h"
#include "mouse.h"
#include "tty.h"
#include "video.h"
static int cursoremu = 1;
void
int10(regcontext_t *REGS)
{
char *addr;
int i, j;
int saved_row, saved_col;
/*
* Any call to the video BIOS is enough to reset the poll
* count on the keyboard.
*/
reset_poll();
switch (R_AH) {
case 0x00: /* Set display mode */
if (!xmode)
goto unsupported;
init_mode(R_AL);
break;
case 0x01: /* Define cursor */
{
int start, end;
start = R_CH;
end = R_CL;
if (cursoremu == 0)
goto out;
/* Cursor emulation */
if (start <= 3 && end <= 3)
goto out;
if (start + 2 >= end) {
/* underline cursor */
start = CharHeight - 3;
end = CharHeight - 2;
goto out;
}
if (start <= 2 || end < start) {
/* block cursor */
start = 0;
end = CharHeight - 2;
goto out;
}
if (start > CharHeight / 2) {
/* half block cursor */
start = CharHeight / 2;
end = 0;
}
out: CursStart = start;
CursEnd = end;
break;
}
case 0x02: /* Position cursor */
if (!xmode)
goto unsupported;
tty_move(R_DH, R_DL);
break;
case 0x03: /* Read cursor position */
if (!xmode)
goto unsupported;
tty_report(&i, &j);
R_DH = i;
R_DL = j;
R_CH = CursStart;
R_CL = CursEnd;
break;
case 0x05:
debug(D_VIDEO, "Select current display page %d\n", R_AL);
break;
case 0x06: /* initialize window/scroll text upward */
if (!xmode)
goto unsupported;
if (R_AL == 0) /* clear screen */
R_AL = DpyRows + 1;
tty_scroll(R_CH, R_CL,
R_DH, R_DL,
R_AL, R_BH << 8);
break;
case 0x07: /* initialize window/scroll text downward */
if (!xmode)
goto unsupported;
if (R_AL == 0) /* clear screen */
R_AL = DpyRows + 1;
tty_rscroll(R_CH, R_CL,
R_DH, R_DL,
R_AL, R_BH << 8);
break;
case 0x08: /* read character/attribute */
if (!xmode)
goto unsupported;
i = tty_char(-1, -1);
R_AX = i;
break;
case 0x09: /* write character/attribute */
if (!xmode)
goto unsupported;
tty_rwrite(R_CX, R_AL, R_BL << 8);
break;
case 0x0a: /* write character */
if (!xmode)
goto unsupported;
debug(D_HALF, "Int 10:0a: Write char: %02x\n", R_AL);
tty_rwrite(R_CX, R_AL, -1);
break;
case 0x0b: /* set border color */
if (!xmode)
goto unsupported;
video_setborder(R_BL);
break;
case 0x0c: /* write graphics pixel */
debug(D_VIDEO, "Write graphics pixel at %d, %d\n", R_CX, R_DX);
break;
case 0x0d: /* read graphics pixel */
debug(D_VIDEO, "Read graphics pixel at %d, %d\n", R_CX, R_DX);
break;
case 0x0e: /* write character */
tty_write(R_AL, -1);
break;
case 0x0f: /* get current video mode */
R_AH = DpyCols; /* number of columns */
R_AL = VideoMode; /* active mode */
R_BH = 0;/*ActivePage *//* display page */
break;
case 0x10:
if (!xmode)
goto unsupported;
switch (R_AL) {
case 0x00: /* Set single palette register */
palette[R_BL] = R_BH;
update_pixels();
break;
case 0x01: /* Set overscan register */
VGA_ATC[ATC_OverscanColor] = R_BH;
break;
case 0x02: /* Set all palette registers */
addr = (char *)MAKEPTR(R_ES, R_DX);
for (i = 0; i < 16; i++)
palette[i] = *addr++;
VGA_ATC[ATC_OverscanColor] = *addr;
update_pixels();
break;
case 0x03: /* Enable/Disable blinking mode */
video_blink((R_BL & 1) ? 1 : 0);
break;
case 0x07: /* Get individual palette register */
R_BH = palette[R_BL];
break;
case 0x08: /* Read overscan register */
R_BH = VGA_ATC[ATC_OverscanColor];
break;
case 0x09: /* Read all palette registers */
addr = (char *)MAKEPTR(R_ES, R_DX);
for (i = 0; i < 16; i++)
*addr++ = palette[i];
*addr = VGA_ATC[ATC_OverscanColor];
break;
case 0x10: /* Set individual DAC register */
dac_rgb[R_BX].red = R_DH & 0x3f;
dac_rgb[R_BX].green = R_CH & 0x3f;
dac_rgb[R_BX].blue = R_CL & 0x3f;
update_pixels();
break;
case 0x12: /* Set block of DAC registers */
addr = (char *)MAKEPTR(R_ES, R_DX);
for (i = R_BX; i < R_BX + R_CX; i++) {
dac_rgb[i].red = *addr++;
dac_rgb[i].green = *addr++;
dac_rgb[i].blue = *addr++;
}
update_pixels();
break;
case 0x13: /* Select video DAC color page */
switch (R_BL) {
case 0:
VGA_ATC[ATC_ModeCtrl] |= (R_BH & 0x01) << 7;
break;
case 1:
VGA_ATC[ATC_ColorSelect] = R_BH & 0x0f;
break;
default:
debug(D_VIDEO, "INT 10 10:13 "
"Bad value for BL: 0x%02x\n", R_BL);
break;
}
case 0x15: /* Read individual DAC register */
R_DH = dac_rgb[R_BX].red;
R_CH = dac_rgb[R_BX].green;
R_CL = dac_rgb[R_BX].blue;
break;
case 0x17: /* Read block of DAC registers */
addr = (char *)MAKEPTR(R_ES, R_DX);
for (i = R_BX; i < R_BX + R_CX; i++) {
*addr++ = dac_rgb[i].red;
*addr++ = dac_rgb[i].green;
*addr++ = dac_rgb[i].blue;
}
break;
case 0x18: /* Set PEL mask */
debug(D_HALF,
"INT 10 10:18 Set PEL mask (%02x)\n", R_BL);
break;
case 0x19: /* Read PEL mask */
debug(D_HALF, "INT 10 10:19 Read PEL mask\n");
break;
case 0x1a: /* Get video dac color-page state */
R_BH = (VGA_ATC[ATC_ModeCtrl] & 0x80) >> 7;
R_BL = VGA_ATC[ATC_ColorSelect];
break;
case 0x1b: /* Perform gray-scale summing */
debug(D_HALF, "Perform gray-scale summing\n");
break;
default:
unknown_int3(0x10, 0x10, R_AL, REGS);
break;
}
break;
case 0x11:
switch (R_AL) {
case 0x00: /* Text-mode chargen: load user-specified
patterns */
debug(D_VIDEO, "Tried to load user defined font.\n");
break;
case 0x01: /* Text-mode chargen: load ROM monochrome
patterns */
debug(D_VIDEO, "Tried to load 8x14 font.\n");
break;
case 0x02: /* Text-mode chargen: load ROM 8x8 double-dot
patterns */
debug(D_VIDEO, "Tried to load 8x8 font.\n");
break;
case 0x03: /* Text-mode chargen: set block specifier */
debug(D_VIDEO, "Tried to activate character set\n");
break;
case 0x04: /* Text-mode chargen: load ROM 8x16 character
set */
debug(D_VIDEO, "Tried to load 8x16 font.\n");
break;
case 0x10: /* Text-mode chargen: load and activate
user-specified patterns */
debug(D_VIDEO,
"Tried to load and activate user defined font\n");
break;
case 0x11: /* Text-mode chargen: load and activate ROM
monochrome patterns */
debug(D_VIDEO,
"Tried to load and activate 8x14 font.\n");
break;
case 0x12: /* Text-mode chargen: load and activate ROM
8x8 double-dot patterns */
debug(D_VIDEO,
"Tried to load and activate 8x8 font.\n");
break;
case 0x14: /* Text-mode chargen: load and activate ROM
8x16 character set */
debug(D_VIDEO,
"Tried to load and activate 8x16 font.\n");
break;
case 0x20: /* Graph-mode chargen: set user 8x8 graphics
characters */
debug(D_VIDEO, "Load second half of 8x8 char set\n");
break;
case 0x21: /* Graph-mode chargen: set user graphics
characters */
debug(D_VIDEO, "Install user defined char set\n");
break;
case 0x22: /* Graph-mode chargen: set ROM 8x14 graphics
chars */
debug(D_VIDEO, "Install 8x14 char set\n");
break;
case 0x23: /* Graph-mode chargen: set ROM 8x8 double-dot
chars */
debug(D_VIDEO, "Install 8x8 char set\n");
break;
case 0x24: /* Graph-mode chargen: load 8x16 graphics
chars */
debug(D_VIDEO, "Install 8x16 char set\n");
break;
case 0x30: /* Get font information */
debug(D_VIDEO,
"INT 10 11:30 Request font address %02x\n", R_BH);
R_CX = CharHeight;
R_DL = DpyRows;
switch(R_BH) {
case 0:
PUTVEC(R_ES, R_BP, ivec[0x1f]);
break;
case 1:
PUTVEC(R_ES, R_BP, ivec[0x43]);
break;
case 2:
case 3:
case 4:
case 5:
case 6:
case 7:
R_ES = 0;
R_BP = 0;
break;
default:
unknown_int4(0x10, 0x11, 0x30, R_BH, REGS);
break;
}
break;
default:
unknown_int3(0x10, 0x11, R_AL, REGS);
break;
}
break;
case 0x12: /* Alternate function select */
if (!xmode)
goto unsupported;
switch (R_BL) {
case 0x10: /* Read EGA/VGA config */
R_BH = NumColors > 1 ? 0 : 1; /* Color */
R_BL = 3; /* 256 K */
break;
case 0x34: /* Cursor emulation */
if (R_AL == 0)
cursoremu = 1;
else
cursoremu = 0;
R_AL = 0x12;
break;
default:
if (vflag)
dump_regs(REGS);
unknown_int3(0x10, 0x12, R_BL, REGS);
break;
}
break;
case 0x13: /* write character string */
if (!xmode)
goto unsupported;
addr = (char *)MAKEPTR(R_ES, R_BP);
switch (R_AL & 0x03) {
case 0:
tty_report(&saved_row, &saved_col);
tty_move(R_DH, R_DL);
for (i = 0; i < R_CX; ++i)
tty_write(*addr++, R_BL << 8);
tty_move(saved_row, saved_col);
break;
case 1:
tty_move(R_DH, R_DL);
for (i = 0; i < R_CX; ++i)
tty_write(*addr++, R_BL << 8);
break;
case 2:
tty_report(&saved_row, &saved_col);
tty_move(R_DH, R_DL);
for (i = 0; i < R_CX; ++i) {
tty_write(addr[0], addr[1]);
addr += 2;
}
tty_move(saved_row, saved_col);
break;
case 3:
tty_move(R_DH, R_DL);
for (i = 0; i < R_CX; ++i) {
tty_write(addr[0], addr[1]);
addr += 2;
}
break;
}
break;
case 0x1a:
if (!xmode)
goto unsupported;
R_AL = 0x1a; /* I am VGA */
R_BL = 8; /* Color VGA */
R_BH = 0; /* No other card */
break;
case 0x1b: /* Video Functionality/State information */
if (R_BX == 0) {
addr = (char *)MAKEPTR(R_ES, R_DI);
memcpy(addr, vga_status, 64);
R_AL = 0x1b;
}
break;
case 0x1c: /* Save/Restore video state */
debug(D_VIDEO, "VGA: Save/restore video state\n");
R_AL = 0;
break;
case 0x30: /* Locate 3270PC configuration table */
R_CX = 0;
R_DX = 0;
break;
case 0x4f: /* get VESA information */
R_AH = 0x01; /* no VESA support */
break;
case 0x6f:
switch (R_AL) {
case 0x00: /* HP-Vectra or Video7 installation check */
R_BX = 0; /* nope, none of that */
break;
default:
unknown_int3(0x10, 0x6f, R_AL, REGS);
break;
}
break;
case 0xef:
case 0xfe: /* Get video buffer */
break;
case 0xfa: /* Interrogate mouse driver */
if (xmode)
PUTPTR(R_ES, R_BX, (long)mouse_area);
break;
case 0xff: /* Update real screen from video buffer */
/* XXX - we should allow secondary buffer here and then
update it as the user requests. */
break;
unsupported:
if (vflag)
dump_regs(REGS);
fatal("int10 function 0x%02x:%02x only available in X mode\n",
R_AH, R_AL);
default:
if (vflag)
dump_regs(REGS);
unknown_int3(0x10, R_AH, R_AL, REGS);
break;
}
}