mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-29 12:03:03 +00:00
Code Issues Releases Activity
e3fc8aba7f
freebsd/sys/dev/rc/rc.c
Poul-Henning Kamp cf9fa8e725 Move suser() and suser_xxx() prototypes and a related #define from 
<sys/proc.h> to <sys/systm.h>.

Correctly document the #includes needed in the manpage.

Add one now needed #include of <sys/systm.h>.
Remove the consequent 48 unused #includes of <sys/proc.h>.
2000-10-29 16:06:56 +00:00

1462 lines
38 KiB
C
Raw Blame History

/*
* Copyright (C) 1995 by Pavel Antonov, Moscow, Russia.
* Copyright (C) 1995 by Andrey A. Chernov, Moscow, Russia.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*
*/
/*
* SDL Communications Riscom/8 (based on Cirrus Logic CL-CD180) driver
*
*/
#include "rc.h"
/*#define RCDEBUG*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/ipl.h>
#include <sys/kernel.h>
#include <sys/tty.h>
#include <sys/conf.h>
#include <sys/dkstat.h>
#include <sys/fcntl.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
#include <sys/ipl.h>
#include <i386/isa/isa_device.h>
#include <i386/isa/ic/cd180.h>
#include <i386/isa/rcreg.h>
/* Prototypes */
static int rcprobe __P((struct isa_device *));
static int rcattach __P((struct isa_device *));
#define rcin(port) RC_IN (nec, port)
#define rcout(port,v) RC_OUT (nec, port, v)
#define WAITFORCCR(u,c) rc_wait0(nec, (u), (c), __LINE__)
#define CCRCMD(u,c,cmd) WAITFORCCR((u), (c)); rcout(CD180_CCR, (cmd))
#define RC_IBUFSIZE 256
#define RB_I_HIGH_WATER (TTYHOG - 2 * RC_IBUFSIZE)
#define RC_OBUFSIZE 512
#define RC_IHIGHWATER (3 * RC_IBUFSIZE / 4)
#define INPUT_FLAGS_SHIFT (2 * RC_IBUFSIZE)
#define LOTS_OF_EVENTS 64
#define RC_FAKEID 0x10
#define RC_PROBED 1
#define RC_ATTACHED 2
#define GET_UNIT(dev) (minor(dev) & 0x3F)
#define CALLOUT(dev) (minor(dev) & 0x80)
/* For isa routines */
struct isa_driver rcdriver = {
INTR_TYPE_TTY,
rcprobe,
rcattach,
"rc"
};
COMPAT_ISA_DRIVER(rc, rcdriver);
static d_open_t rcopen;
static d_close_t rcclose;
static d_ioctl_t rcioctl;
#define CDEV_MAJOR 63
static struct cdevsw rc_cdevsw = {
/* open */ rcopen,
/* close */ rcclose,
/* read */ ttyread,
/* write */ ttywrite,
/* ioctl */ rcioctl,
/* poll */ ttypoll,
/* mmap */ nommap,
/* strategy */ nostrategy,
/* name */ "rc",
/* maj */ CDEV_MAJOR,
/* dump */ nodump,
/* psize */ nopsize,
/* flags */ D_TTY,
/* bmaj */ -1
};
/* Per-board structure */
static struct rc_softc {
u_int rcb_probed; /* 1 - probed, 2 - attached */
u_int rcb_addr; /* Base I/O addr */
u_int rcb_unit; /* unit # */
u_char rcb_dtr; /* DTR status */
struct rc_chans *rcb_baserc; /* base rc ptr */
} rc_softc[NRC];
/* Per-channel structure */
static struct rc_chans {
struct rc_softc *rc_rcb; /* back ptr */
u_short rc_flags; /* Misc. flags */
int rc_chan; /* Channel # */
u_char rc_ier; /* intr. enable reg */
u_char rc_msvr; /* modem sig. status */
u_char rc_cor2; /* options reg */
u_char rc_pendcmd; /* special cmd pending */
u_int rc_dtrwait; /* dtr timeout */
u_int rc_dcdwaits; /* how many waits DCD in open */
u_char rc_hotchar; /* end packed optimize */
struct tty *rc_tp; /* tty struct */
u_char *rc_iptr; /* Chars input buffer */
u_char *rc_hiwat; /* hi-water mark */
u_char *rc_bufend; /* end of buffer */
u_char *rc_optr; /* ptr in output buf */
u_char *rc_obufend; /* end of output buf */
u_char rc_ibuf[4 * RC_IBUFSIZE]; /* input buffer */
u_char rc_obuf[RC_OBUFSIZE]; /* output buffer */
} rc_chans[NRC * CD180_NCHAN];
static int rc_scheduled_event = 0;
/* for pstat -t */
static struct tty rc_tty[NRC * CD180_NCHAN];
static const int nrc_tty = NRC * CD180_NCHAN;
/* Flags */
#define RC_DTR_OFF 0x0001 /* DTR wait, for close/open */
#define RC_ACTOUT 0x0002 /* Dial-out port active */
#define RC_RTSFLOW 0x0004 /* RTS flow ctl enabled */
#define RC_CTSFLOW 0x0008 /* CTS flow ctl enabled */
#define RC_DORXFER 0x0010 /* RXFER event planned */
#define RC_DOXXFER 0x0020 /* XXFER event planned */
#define RC_MODCHG 0x0040 /* Modem status changed */
#define RC_OSUSP 0x0080 /* Output suspended */
#define RC_OSBUSY 0x0100 /* start() routine in progress */
#define RC_WAS_BUFOVFL 0x0200 /* low-level buffer ovferflow */
#define RC_WAS_SILOVFL 0x0400 /* silo buffer overflow */
#define RC_SEND_RDY 0x0800 /* ready to send */
/* Table for translation of RCSR status bits to internal form */
static int rc_rcsrt[16] = {
0, TTY_OE, TTY_FE,
TTY_FE|TTY_OE, TTY_PE, TTY_PE|TTY_OE,
TTY_PE|TTY_FE, TTY_PE|TTY_FE|TTY_OE, TTY_BI,
TTY_BI|TTY_OE, TTY_BI|TTY_FE, TTY_BI|TTY_FE|TTY_OE,
TTY_BI|TTY_PE, TTY_BI|TTY_PE|TTY_OE, TTY_BI|TTY_PE|TTY_FE,
TTY_BI|TTY_PE|TTY_FE|TTY_OE
};
static struct intrhand *rc_ih;
/* Static prototypes */
static ointhand2_t rcintr;
static void rc_hwreset __P((int, int, unsigned int));
static int rc_test __P((int, int));
static void rc_discard_output __P((struct rc_chans *));
static void rc_hardclose __P((struct rc_chans *));
static int rc_modctl __P((struct rc_chans *, int, int));
static void rc_start __P((struct tty *));
static void rc_stop __P((struct tty *, int rw));
static int rc_param __P((struct tty *, struct termios *));
static void rcpoll __P((void *));
static void rc_reinit __P((struct rc_softc *));
#ifdef RCDEBUG
static void printrcflags();
#endif
static timeout_t rc_dtrwakeup;
static timeout_t rc_wakeup;
static void disc_optim __P((struct tty *tp, struct termios *t, struct rc_chans *));
static void rc_wait0 __P((int nec, int unit, int chan, int line));
/**********************************************/
/* Quick device probing */
static int
rcprobe(dvp)
struct isa_device *dvp;
{
int irq = ffs(dvp->id_irq) - 1;
register int nec = dvp->id_iobase;
if (dvp->id_unit > NRC)
return 0;
if (!RC_VALIDADDR(nec)) {
printf("rc%d: illegal base address %x\n", dvp->id_unit, nec);
return 0;
}
if (!RC_VALIDIRQ(irq)) {
printf("rc%d: illegal IRQ value %d\n", dvp->id_unit, irq);
return 0;
}
rcout(CD180_PPRL, 0x22); /* Random values to Prescale reg. */
rcout(CD180_PPRH, 0x11);
if (rcin(CD180_PPRL) != 0x22 || rcin(CD180_PPRH) != 0x11)
return 0;
/* Now, test the board more thoroughly, with diagnostic */
if (rc_test(nec, dvp->id_unit))
return 0;
rc_softc[dvp->id_unit].rcb_probed = RC_PROBED;
return 0xF;
}
static int
rcattach(dvp)
struct isa_device *dvp;
{
register int chan, nec = dvp->id_iobase;
struct rc_softc *rcb = &rc_softc[dvp->id_unit];
struct rc_chans *rc = &rc_chans[dvp->id_unit * CD180_NCHAN];
static int rc_started = 0;
struct tty *tp;
dvp->id_ointr = rcintr;
/* Thorooughly test the device */
if (rcb->rcb_probed != RC_PROBED)
return 0;
rcb->rcb_addr = nec;
rcb->rcb_dtr = 0;
rcb->rcb_baserc = rc;
rcb->rcb_unit = dvp->id_unit;
/*rcb->rcb_chipid = 0x10 + dvp->id_unit;*/
printf("rc%d: %d chans, firmware rev. %c\n", rcb->rcb_unit,
CD180_NCHAN, (rcin(CD180_GFRCR) & 0xF) + 'A');
for (chan = 0; chan < CD180_NCHAN; chan++, rc++) {
rc->rc_rcb = rcb;
rc->rc_chan = chan;
rc->rc_iptr = rc->rc_ibuf;
rc->rc_bufend = &rc->rc_ibuf[RC_IBUFSIZE];
rc->rc_hiwat = &rc->rc_ibuf[RC_IHIGHWATER];
rc->rc_flags = rc->rc_ier = rc->rc_msvr = 0;
rc->rc_cor2 = rc->rc_pendcmd = 0;
rc->rc_optr = rc->rc_obufend = rc->rc_obuf;
rc->rc_dtrwait = 3 * hz;
rc->rc_dcdwaits= 0;
rc->rc_hotchar = 0;
tp = rc->rc_tp = &rc_tty[chan + (dvp->id_unit * CD180_NCHAN)];
ttychars(tp);
tp->t_lflag = tp->t_iflag = tp->t_oflag = 0;
tp->t_cflag = TTYDEF_CFLAG;
tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED;
}
rcb->rcb_probed = RC_ATTACHED;
if (!rc_started) {
cdevsw_add(&rc_cdevsw);
rc_ih = sinthand_add("tty:rc", &tty_ithd, rcpoll, NULL,
SWI_TTY, 0);
rc_wakeup((void *)NULL);
rc_started = 1;
}
return 1;
}
/* RC interrupt handling */
static void
rcintr(unit)
int unit;
{
register struct rc_softc *rcb = &rc_softc[unit];
register struct rc_chans *rc;
register int nec, resid;
register u_char val, iack, bsr, ucnt, *optr;
int good_data, t_state;
if (rcb->rcb_probed != RC_ATTACHED) {
printf("rc%d: bogus interrupt\n", unit);
return;
}
nec = rcb->rcb_addr;
bsr = ~(rcin(RC_BSR));
if (!(bsr & (RC_BSR_TOUT|RC_BSR_RXINT|RC_BSR_TXINT|RC_BSR_MOINT))) {
printf("rc%d: extra interrupt\n", unit);
rcout(CD180_EOIR, 0);
return;
}
while (bsr & (RC_BSR_TOUT|RC_BSR_RXINT|RC_BSR_TXINT|RC_BSR_MOINT)) {
#ifdef RCDEBUG_DETAILED
printf("rc%d: intr (%02x) %s%s%s%s\n", unit, bsr,
(bsr & RC_BSR_TOUT)?"TOUT ":"",
(bsr & RC_BSR_RXINT)?"RXINT ":"",
(bsr & RC_BSR_TXINT)?"TXINT ":"",
(bsr & RC_BSR_MOINT)?"MOINT":"");
#endif
if (bsr & RC_BSR_TOUT) {
printf("rc%d: hardware failure, reset board\n", unit);
rcout(RC_CTOUT, 0);
rc_reinit(rcb);
return;
}
if (bsr & RC_BSR_RXINT) {
iack = rcin(RC_PILR_RX);
good_data = (iack == (GIVR_IT_RGDI | RC_FAKEID));
if (!good_data && iack != (GIVR_IT_REI | RC_FAKEID)) {
printf("rc%d: fake rxint: %02x\n", unit, iack);
goto more_intrs;
}
rc = rcb->rcb_baserc + ((rcin(CD180_GICR) & GICR_CHAN) >> GICR_LSH);
t_state = rc->rc_tp->t_state;
/* Do RTS flow control stuff */
if ( (rc->rc_flags & RC_RTSFLOW)
|| !(t_state & TS_ISOPEN)
) {
if ( ( !(t_state & TS_ISOPEN)
|| (t_state & TS_TBLOCK)
)
&& (rc->rc_msvr & MSVR_RTS)
)
rcout(CD180_MSVR,
rc->rc_msvr &= ~MSVR_RTS);
else if (!(rc->rc_msvr & MSVR_RTS))
rcout(CD180_MSVR,
rc->rc_msvr |= MSVR_RTS);
}
ucnt = rcin(CD180_RDCR) & 0xF;
resid = 0;
if (t_state & TS_ISOPEN) {
/* check for input buffer overflow */
if ((rc->rc_iptr + ucnt) >= rc->rc_bufend) {
resid = ucnt;
ucnt = rc->rc_bufend - rc->rc_iptr;
resid -= ucnt;
if (!(rc->rc_flags & RC_WAS_BUFOVFL)) {
rc->rc_flags |= RC_WAS_BUFOVFL;
rc_scheduled_event++;
}
}
optr = rc->rc_iptr;
/* check foor good data */
if (good_data) {
while (ucnt-- > 0) {
val = rcin(CD180_RDR);
optr[0] = val;
optr[INPUT_FLAGS_SHIFT] = 0;
optr++;
rc_scheduled_event++;
if (val != 0 && val == rc->rc_hotchar)
sched_swi(rc_ih, SWI_NOSWITCH);
}
} else {
/* Store also status data */
while (ucnt-- > 0) {
iack = rcin(CD180_RCSR);
if (iack & RCSR_Timeout)
break;
if ( (iack & RCSR_OE)
&& !(rc->rc_flags & RC_WAS_SILOVFL)) {
rc->rc_flags |= RC_WAS_SILOVFL;
rc_scheduled_event++;
}
val = rcin(CD180_RDR);
/*
Don't store PE if IGNPAR and BREAK if IGNBRK,
this hack allows "raw" tty optimization
works even if IGN* is set.
*/
if ( !(iack & (RCSR_PE|RCSR_FE|RCSR_Break))
|| ((!(iack & (RCSR_PE|RCSR_FE))
|| !(rc->rc_tp->t_iflag & IGNPAR))
&& (!(iack & RCSR_Break)
|| !(rc->rc_tp->t_iflag & IGNBRK)))) {
if ( (iack & (RCSR_PE|RCSR_FE))
&& (t_state & TS_CAN_BYPASS_L_RINT)
&& ((iack & RCSR_FE)
|| ((iack & RCSR_PE)
&& (rc->rc_tp->t_iflag & INPCK))))
val = 0;
else if (val != 0 && val == rc->rc_hotchar)
sched_swi(rc_ih, SWI_NOSWITCH);
optr[0] = val;
optr[INPUT_FLAGS_SHIFT] = iack;
optr++;
rc_scheduled_event++;
}
}
}
rc->rc_iptr = optr;
rc->rc_flags |= RC_DORXFER;
} else
resid = ucnt;
/* Clear FIFO if necessary */
while (resid-- > 0) {
if (!good_data)
iack = rcin(CD180_RCSR);
else
iack = 0;
if (iack & RCSR_Timeout)
break;
(void) rcin(CD180_RDR);
}
goto more_intrs;
}
if (bsr & RC_BSR_MOINT) {
iack = rcin(RC_PILR_MODEM);
if (iack != (GIVR_IT_MSCI | RC_FAKEID)) {
printf("rc%d: fake moint: %02x\n", unit, iack);
goto more_intrs;
}
rc = rcb->rcb_baserc + ((rcin(CD180_GICR) & GICR_CHAN) >> GICR_LSH);
iack = rcin(CD180_MCR);
rc->rc_msvr = rcin(CD180_MSVR);
rcout(CD180_MCR, 0);
#ifdef RCDEBUG
printrcflags(rc, "moint");
#endif
if (rc->rc_flags & RC_CTSFLOW) {
if (rc->rc_msvr & MSVR_CTS)
rc->rc_flags |= RC_SEND_RDY;
else
rc->rc_flags &= ~RC_SEND_RDY;
} else
rc->rc_flags |= RC_SEND_RDY;
if ((iack & MCR_CDchg) && !(rc->rc_flags & RC_MODCHG)) {
rc_scheduled_event += LOTS_OF_EVENTS;
rc->rc_flags |= RC_MODCHG;
sched_swi(rc_ih, SWI_NOSWITCH);
}
goto more_intrs;
}
if (bsr & RC_BSR_TXINT) {
iack = rcin(RC_PILR_TX);
if (iack != (GIVR_IT_TDI | RC_FAKEID)) {
printf("rc%d: fake txint: %02x\n", unit, iack);
goto more_intrs;
}
rc = rcb->rcb_baserc + ((rcin(CD180_GICR) & GICR_CHAN) >> GICR_LSH);
if ( (rc->rc_flags & RC_OSUSP)
|| !(rc->rc_flags & RC_SEND_RDY)
)
goto more_intrs;
/* Handle breaks and other stuff */
if (rc->rc_pendcmd) {
rcout(CD180_COR2, rc->rc_cor2 |= COR2_ETC);
rcout(CD180_TDR, CD180_C_ESC);
rcout(CD180_TDR, rc->rc_pendcmd);
rcout(CD180_COR2, rc->rc_cor2 &= ~COR2_ETC);
rc->rc_pendcmd = 0;
goto more_intrs;
}
optr = rc->rc_optr;
resid = rc->rc_obufend - optr;
if (resid > CD180_NFIFO)
resid = CD180_NFIFO;
while (resid-- > 0)
rcout(CD180_TDR, *optr++);
rc->rc_optr = optr;
/* output completed? */
if (optr >= rc->rc_obufend) {
rcout(CD180_IER, rc->rc_ier &= ~IER_TxRdy);
#ifdef RCDEBUG
printf("rc%d/%d: output completed\n", unit, rc->rc_chan);
#endif
if (!(rc->rc_flags & RC_DOXXFER)) {
rc_scheduled_event += LOTS_OF_EVENTS;
rc->rc_flags |= RC_DOXXFER;
sched_swi(rc_ih, SWI_NOSWITCH);
}
}
}
more_intrs:
rcout(CD180_EOIR, 0); /* end of interrupt */
rcout(RC_CTOUT, 0);
bsr = ~(rcin(RC_BSR));
}
}
/* Feed characters to output buffer */
static void rc_start(tp)
register struct tty *tp;
{
register struct rc_chans *rc = &rc_chans[GET_UNIT(tp->t_dev)];
register int nec = rc->rc_rcb->rcb_addr, s;
if (rc->rc_flags & RC_OSBUSY)
return;
s = spltty();
rc->rc_flags |= RC_OSBUSY;
disable_intr();
if (tp->t_state & TS_TTSTOP)
rc->rc_flags |= RC_OSUSP;
else
rc->rc_flags &= ~RC_OSUSP;
/* Do RTS flow control stuff */
if ( (rc->rc_flags & RC_RTSFLOW)
&& (tp->t_state & TS_TBLOCK)
&& (rc->rc_msvr & MSVR_RTS)
) {
rcout(CD180_CAR, rc->rc_chan);
rcout(CD180_MSVR, rc->rc_msvr &= ~MSVR_RTS);
} else if (!(rc->rc_msvr & MSVR_RTS)) {
rcout(CD180_CAR, rc->rc_chan);
rcout(CD180_MSVR, rc->rc_msvr |= MSVR_RTS);
}
enable_intr();
if (tp->t_state & (TS_TIMEOUT|TS_TTSTOP))
goto out;
#ifdef RCDEBUG
printrcflags(rc, "rcstart");
#endif
ttwwakeup(tp);
#ifdef RCDEBUG
printf("rcstart: outq = %d obuf = %d\n",
tp->t_outq.c_cc, rc->rc_obufend - rc->rc_optr);
#endif
if (tp->t_state & TS_BUSY)
goto out; /* output still in progress ... */
if (tp->t_outq.c_cc > 0) {
u_int ocnt;
tp->t_state |= TS_BUSY;
ocnt = q_to_b(&tp->t_outq, rc->rc_obuf, sizeof rc->rc_obuf);
disable_intr();
rc->rc_optr = rc->rc_obuf;
rc->rc_obufend = rc->rc_optr + ocnt;
enable_intr();
if (!(rc->rc_ier & IER_TxRdy)) {
#ifdef RCDEBUG
printf("rc%d/%d: rcstart enable txint\n", rc->rc_rcb->rcb_unit, rc->rc_chan);
#endif
rcout(CD180_CAR, rc->rc_chan);
rcout(CD180_IER, rc->rc_ier |= IER_TxRdy);
}
}
out:
rc->rc_flags &= ~RC_OSBUSY;
(void) splx(s);
}
/* Handle delayed events. */
void rcpoll(void *arg)
{
register struct rc_chans *rc;
register struct rc_softc *rcb;
register u_char *tptr, *eptr;
register struct tty *tp;
register int chan, icnt, nec, unit;
if (rc_scheduled_event == 0)
return;
repeat:
for (unit = 0; unit < NRC; unit++) {
rcb = &rc_softc[unit];
rc = rcb->rcb_baserc;
nec = rc->rc_rcb->rcb_addr;
for (chan = 0; chan < CD180_NCHAN; rc++, chan++) {
tp = rc->rc_tp;
#ifdef RCDEBUG
if (rc->rc_flags & (RC_DORXFER|RC_DOXXFER|RC_MODCHG|
RC_WAS_BUFOVFL|RC_WAS_SILOVFL))
printrcflags(rc, "rcevent");
#endif
if (rc->rc_flags & RC_WAS_BUFOVFL) {
disable_intr();
rc->rc_flags &= ~RC_WAS_BUFOVFL;
rc_scheduled_event--;
enable_intr();
printf("rc%d/%d: interrupt-level buffer overflow\n",
unit, chan);
}
if (rc->rc_flags & RC_WAS_SILOVFL) {
disable_intr();
rc->rc_flags &= ~RC_WAS_SILOVFL;
rc_scheduled_event--;
enable_intr();
printf("rc%d/%d: silo overflow\n",
unit, chan);
}
if (rc->rc_flags & RC_MODCHG) {
disable_intr();
rc->rc_flags &= ~RC_MODCHG;
rc_scheduled_event -= LOTS_OF_EVENTS;
enable_intr();
(*linesw[tp->t_line].l_modem)(tp, !!(rc->rc_msvr & MSVR_CD));
}
if (rc->rc_flags & RC_DORXFER) {
disable_intr();
rc->rc_flags &= ~RC_DORXFER;
eptr = rc->rc_iptr;
if (rc->rc_bufend == &rc->rc_ibuf[2 * RC_IBUFSIZE])
tptr = &rc->rc_ibuf[RC_IBUFSIZE];
else
tptr = rc->rc_ibuf;
icnt = eptr - tptr;
if (icnt > 0) {
if (rc->rc_bufend == &rc->rc_ibuf[2 * RC_IBUFSIZE]) {
rc->rc_iptr = rc->rc_ibuf;
rc->rc_bufend = &rc->rc_ibuf[RC_IBUFSIZE];
rc->rc_hiwat = &rc->rc_ibuf[RC_IHIGHWATER];
} else {
rc->rc_iptr = &rc->rc_ibuf[RC_IBUFSIZE];
rc->rc_bufend = &rc->rc_ibuf[2 * RC_IBUFSIZE];
rc->rc_hiwat =
&rc->rc_ibuf[RC_IBUFSIZE + RC_IHIGHWATER];
}
if ( (rc->rc_flags & RC_RTSFLOW)
&& (tp->t_state & TS_ISOPEN)
&& !(tp->t_state & TS_TBLOCK)
&& !(rc->rc_msvr & MSVR_RTS)
) {
rcout(CD180_CAR, chan);
rcout(CD180_MSVR,
rc->rc_msvr |= MSVR_RTS);
}
rc_scheduled_event -= icnt;
}
enable_intr();
if (icnt <= 0 || !(tp->t_state & TS_ISOPEN))
goto done1;
if ( (tp->t_state & TS_CAN_BYPASS_L_RINT)
&& !(tp->t_state & TS_LOCAL)) {
if ((tp->t_rawq.c_cc + icnt) >= RB_I_HIGH_WATER
&& ((rc->rc_flags & RC_RTSFLOW) || (tp->t_iflag & IXOFF))
&& !(tp->t_state & TS_TBLOCK))
ttyblock(tp);
tk_nin += icnt;
tk_rawcc += icnt;
tp->t_rawcc += icnt;
if (b_to_q(tptr, icnt, &tp->t_rawq))
printf("rc%d/%d: tty-level buffer overflow\n",
unit, chan);
ttwakeup(tp);
if ((tp->t_state & TS_TTSTOP) && ((tp->t_iflag & IXANY)
|| (tp->t_cc[VSTART] == tp->t_cc[VSTOP]))) {
tp->t_state &= ~TS_TTSTOP;
tp->t_lflag &= ~FLUSHO;
rc_start(tp);
}
} else {
for (; tptr < eptr; tptr++)
(*linesw[tp->t_line].l_rint)
(tptr[0] |
rc_rcsrt[tptr[INPUT_FLAGS_SHIFT] & 0xF], tp);
}
done1: ;
}
if (rc->rc_flags & RC_DOXXFER) {
disable_intr();
rc_scheduled_event -= LOTS_OF_EVENTS;
rc->rc_flags &= ~RC_DOXXFER;
rc->rc_tp->t_state &= ~TS_BUSY;
enable_intr();
(*linesw[tp->t_line].l_start)(tp);
}
}
if (rc_scheduled_event == 0)
break;
}
if (rc_scheduled_event >= LOTS_OF_EVENTS)
goto repeat;
}
static void
rc_stop(tp, rw)
register struct tty *tp;
int rw;
{
register struct rc_chans *rc = &rc_chans[GET_UNIT(tp->t_dev)];
u_char *tptr, *eptr;
#ifdef RCDEBUG
printf("rc%d/%d: rc_stop %s%s\n", rc->rc_rcb->rcb_unit, rc->rc_chan,
(rw & FWRITE)?"FWRITE ":"", (rw & FREAD)?"FREAD":"");
#endif
if (rw & FWRITE)
rc_discard_output(rc);
disable_intr();
if (rw & FREAD) {
rc->rc_flags &= ~RC_DORXFER;
eptr = rc->rc_iptr;
if (rc->rc_bufend == &rc->rc_ibuf[2 * RC_IBUFSIZE]) {
tptr = &rc->rc_ibuf[RC_IBUFSIZE];
rc->rc_iptr = &rc->rc_ibuf[RC_IBUFSIZE];
} else {
tptr = rc->rc_ibuf;
rc->rc_iptr = rc->rc_ibuf;
}
rc_scheduled_event -= eptr - tptr;
}
if (tp->t_state & TS_TTSTOP)
rc->rc_flags |= RC_OSUSP;
else
rc->rc_flags &= ~RC_OSUSP;
enable_intr();
}
static int
rcopen(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
register struct rc_chans *rc;
register struct tty *tp;
int unit, nec, s, error = 0;
unit = GET_UNIT(dev);
if (unit >= NRC * CD180_NCHAN)
return ENXIO;
if (rc_softc[unit / CD180_NCHAN].rcb_probed != RC_ATTACHED)
return ENXIO;
rc = &rc_chans[unit];
tp = rc->rc_tp;
dev->si_tty = tp;
nec = rc->rc_rcb->rcb_addr;
#ifdef RCDEBUG
printf("rc%d/%d: rcopen: dev %x\n", rc->rc_rcb->rcb_unit, unit, dev);
#endif
s = spltty();
again:
while (rc->rc_flags & RC_DTR_OFF) {
error = tsleep(&(rc->rc_dtrwait), TTIPRI | PCATCH, "rcdtr", 0);
if (error != 0)
goto out;
}
if (tp->t_state & TS_ISOPEN) {
if (CALLOUT(dev)) {
if (!(rc->rc_flags & RC_ACTOUT)) {
error = EBUSY;
goto out;
}
} else {
if (rc->rc_flags & RC_ACTOUT) {
if (flag & O_NONBLOCK) {
error = EBUSY;
goto out;
}
error = tsleep(&rc->rc_rcb,
TTIPRI|PCATCH, "rcbi", 0);
if (error)
goto out;
goto again;
}
}
if (tp->t_state & TS_XCLUDE &&
suser(p)) {
error = EBUSY;
goto out;
}
} else {
tp->t_oproc = rc_start;
tp->t_param = rc_param;
tp->t_stop = rc_stop;
tp->t_dev = dev;
if (CALLOUT(dev))
tp->t_cflag |= CLOCAL;
else
tp->t_cflag &= ~CLOCAL;
error = rc_param(tp, &tp->t_termios);
if (error)
goto out;
(void) rc_modctl(rc, TIOCM_RTS|TIOCM_DTR, DMSET);
if ((rc->rc_msvr & MSVR_CD) || CALLOUT(dev))
(*linesw[tp->t_line].l_modem)(tp, 1);
}
if (!(tp->t_state & TS_CARR_ON) && !CALLOUT(dev)
&& !(tp->t_cflag & CLOCAL) && !(flag & O_NONBLOCK)) {
rc->rc_dcdwaits++;
error = tsleep(TSA_CARR_ON(tp), TTIPRI | PCATCH, "rcdcd", 0);
rc->rc_dcdwaits--;
if (error != 0)
goto out;
goto again;
}
error = (*linesw[tp->t_line].l_open)(dev, tp);
disc_optim(tp, &tp->t_termios, rc);
if ((tp->t_state & TS_ISOPEN) && CALLOUT(dev))
rc->rc_flags |= RC_ACTOUT;
out:
(void) splx(s);
if(rc->rc_dcdwaits == 0 && !(tp->t_state & TS_ISOPEN))
rc_hardclose(rc);
return error;
}
static int
rcclose(dev, flag, mode, p)
dev_t dev;
int flag, mode;
struct proc *p;
{
register struct rc_chans *rc;
register struct tty *tp;
int s, unit = GET_UNIT(dev);
if (unit >= NRC * CD180_NCHAN)
return ENXIO;
rc = &rc_chans[unit];
tp = rc->rc_tp;
#ifdef RCDEBUG
printf("rc%d/%d: rcclose dev %x\n", rc->rc_rcb->rcb_unit, unit, dev);
#endif
s = spltty();
(*linesw[tp->t_line].l_close)(tp, flag);
disc_optim(tp, &tp->t_termios, rc);
rc_stop(tp, FREAD | FWRITE);
rc_hardclose(rc);
ttyclose(tp);
splx(s);
return 0;
}
static void rc_hardclose(rc)
register struct rc_chans *rc;
{
register int s, nec = rc->rc_rcb->rcb_addr;
register struct tty *tp = rc->rc_tp;
s = spltty();
rcout(CD180_CAR, rc->rc_chan);
/* Disable rx/tx intrs */
rcout(CD180_IER, rc->rc_ier = 0);
if ( (tp->t_cflag & HUPCL)
|| (!(rc->rc_flags & RC_ACTOUT)
&& !(rc->rc_msvr & MSVR_CD)
&& !(tp->t_cflag & CLOCAL))
|| !(tp->t_state & TS_ISOPEN)
) {
CCRCMD(rc->rc_rcb->rcb_unit, rc->rc_chan, CCR_ResetChan);
WAITFORCCR(rc->rc_rcb->rcb_unit, rc->rc_chan);
(void) rc_modctl(rc, TIOCM_RTS, DMSET);
if (rc->rc_dtrwait) {
timeout(rc_dtrwakeup, rc, rc->rc_dtrwait);
rc->rc_flags |= RC_DTR_OFF;
}
}
rc->rc_flags &= ~RC_ACTOUT;
wakeup((caddr_t) &rc->rc_rcb); /* wake bi */
wakeup(TSA_CARR_ON(tp));
(void) splx(s);
}
/* Reset the bastard */
static void rc_hwreset(unit, nec, chipid)
register int unit, nec;
unsigned int chipid;
{
CCRCMD(unit, -1, CCR_HWRESET); /* Hardware reset */
DELAY(20000);
WAITFORCCR(unit, -1);
rcout(RC_CTOUT, 0); /* Clear timeout */
rcout(CD180_GIVR, chipid);
rcout(CD180_GICR, 0);
/* Set Prescaler Registers (1 msec) */
rcout(CD180_PPRL, ((RC_OSCFREQ + 999) / 1000) & 0xFF);
rcout(CD180_PPRH, ((RC_OSCFREQ + 999) / 1000) >> 8);
/* Initialize Priority Interrupt Level Registers */
rcout(CD180_PILR1, RC_PILR_MODEM);
rcout(CD180_PILR2, RC_PILR_TX);
rcout(CD180_PILR3, RC_PILR_RX);
/* Reset DTR */
rcout(RC_DTREG, ~0);
}
/* Set channel parameters */
static int rc_param(tp, ts)
register struct tty *tp;
struct termios *ts;
{
register struct rc_chans *rc = &rc_chans[GET_UNIT(tp->t_dev)];
register int nec = rc->rc_rcb->rcb_addr;
int idivs, odivs, s, val, cflag, iflag, lflag, inpflow;
if ( ts->c_ospeed < 0 || ts->c_ospeed > 76800
|| ts->c_ispeed < 0 || ts->c_ispeed > 76800
)
return (EINVAL);
if (ts->c_ispeed == 0)
ts->c_ispeed = ts->c_ospeed;
odivs = RC_BRD(ts->c_ospeed);
idivs = RC_BRD(ts->c_ispeed);
s = spltty();
/* Select channel */
rcout(CD180_CAR, rc->rc_chan);
/* If speed == 0, hangup line */
if (ts->c_ospeed == 0) {
CCRCMD(rc->rc_rcb->rcb_unit, rc->rc_chan, CCR_ResetChan);
WAITFORCCR(rc->rc_rcb->rcb_unit, rc->rc_chan);
(void) rc_modctl(rc, TIOCM_DTR, DMBIC);
}
tp->t_state &= ~TS_CAN_BYPASS_L_RINT;
cflag = ts->c_cflag;
iflag = ts->c_iflag;
lflag = ts->c_lflag;
if (idivs > 0) {
rcout(CD180_RBPRL, idivs & 0xFF);
rcout(CD180_RBPRH, idivs >> 8);
}
if (odivs > 0) {
rcout(CD180_TBPRL, odivs & 0xFF);
rcout(CD180_TBPRH, odivs >> 8);
}
/* set timeout value */
if (ts->c_ispeed > 0) {
int itm = ts->c_ispeed > 2400 ? 5 : 10000 / ts->c_ispeed + 1;
if ( !(lflag & ICANON)
&& ts->c_cc[VMIN] != 0 && ts->c_cc[VTIME] != 0
&& ts->c_cc[VTIME] * 10 > itm)
itm = ts->c_cc[VTIME] * 10;
rcout(CD180_RTPR, itm <= 255 ? itm : 255);
}
switch (cflag & CSIZE) {
case CS5: val = COR1_5BITS; break;
case CS6: val = COR1_6BITS; break;
case CS7: val = COR1_7BITS; break;
default:
case CS8: val = COR1_8BITS; break;
}
if (cflag & PARENB) {
val |= COR1_NORMPAR;
if (cflag & PARODD)
val |= COR1_ODDP;
if (!(cflag & INPCK))
val |= COR1_Ignore;
} else
val |= COR1_Ignore;
if (cflag & CSTOPB)
val |= COR1_2SB;
rcout(CD180_COR1, val);
/* Set FIFO threshold */
val = ts->c_ospeed <= 4800 ? 1 : CD180_NFIFO / 2;
inpflow = 0;
if ( (iflag & IXOFF)
&& ( ts->c_cc[VSTOP] != _POSIX_VDISABLE
&& ( ts->c_cc[VSTART] != _POSIX_VDISABLE
|| (iflag & IXANY)
)
)
) {
inpflow = 1;
val |= COR3_SCDE|COR3_FCT;
}
rcout(CD180_COR3, val);
/* Initialize on-chip automatic flow control */
val = 0;
rc->rc_flags &= ~(RC_CTSFLOW|RC_SEND_RDY);
if (cflag & CCTS_OFLOW) {
rc->rc_flags |= RC_CTSFLOW;
val |= COR2_CtsAE;
} else
rc->rc_flags |= RC_SEND_RDY;
if (tp->t_state & TS_TTSTOP)
rc->rc_flags |= RC_OSUSP;
else
rc->rc_flags &= ~RC_OSUSP;
if (cflag & CRTS_IFLOW)
rc->rc_flags |= RC_RTSFLOW;
else
rc->rc_flags &= ~RC_RTSFLOW;
if (inpflow) {
if (ts->c_cc[VSTART] != _POSIX_VDISABLE)
rcout(CD180_SCHR1, ts->c_cc[VSTART]);
rcout(CD180_SCHR2, ts->c_cc[VSTOP]);
val |= COR2_TxIBE;
if (iflag & IXANY)
val |= COR2_IXM;
}
rcout(CD180_COR2, rc->rc_cor2 = val);
CCRCMD(rc->rc_rcb->rcb_unit, rc->rc_chan,
CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
disc_optim(tp, ts, rc);
/* modem ctl */
val = cflag & CLOCAL ? 0 : MCOR1_CDzd;
if (cflag & CCTS_OFLOW)
val |= MCOR1_CTSzd;
rcout(CD180_MCOR1, val);
val = cflag & CLOCAL ? 0 : MCOR2_CDod;
if (cflag & CCTS_OFLOW)
val |= MCOR2_CTSod;
rcout(CD180_MCOR2, val);
/* enable i/o and interrupts */
CCRCMD(rc->rc_rcb->rcb_unit, rc->rc_chan,
CCR_XMTREN | ((cflag & CREAD) ? CCR_RCVREN : CCR_RCVRDIS));
WAITFORCCR(rc->rc_rcb->rcb_unit, rc->rc_chan);
rc->rc_ier = cflag & CLOCAL ? 0 : IER_CD;
if (cflag & CCTS_OFLOW)
rc->rc_ier |= IER_CTS;
if (cflag & CREAD)
rc->rc_ier |= IER_RxData;
if (tp->t_state & TS_BUSY)
rc->rc_ier |= IER_TxRdy;
if (ts->c_ospeed != 0)
rc_modctl(rc, TIOCM_DTR, DMBIS);
if ((cflag & CCTS_OFLOW) && (rc->rc_msvr & MSVR_CTS))
rc->rc_flags |= RC_SEND_RDY;
rcout(CD180_IER, rc->rc_ier);
(void) splx(s);
return 0;
}
/* Re-initialize board after bogus interrupts */
static void rc_reinit(rcb)
struct rc_softc *rcb;
{
register struct rc_chans *rc, *rce;
register int nec;
nec = rcb->rcb_addr;
rc_hwreset(rcb->rcb_unit, nec, RC_FAKEID);
rc = &rc_chans[rcb->rcb_unit * CD180_NCHAN];
rce = rc + CD180_NCHAN;
for (; rc < rce; rc++)
(void) rc_param(rc->rc_tp, &rc->rc_tp->t_termios);
}
static int
rcioctl(dev, cmd, data, flag, p)
dev_t dev;
u_long cmd;
int flag;
caddr_t data;
struct proc *p;
{
register struct rc_chans *rc = &rc_chans[GET_UNIT(dev)];
register int s, error;
struct tty *tp = rc->rc_tp;
error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
if (error != ENOIOCTL)
return (error);
error = ttioctl(tp, cmd, data, flag);
disc_optim(tp, &tp->t_termios, rc);
if (error != ENOIOCTL)
return (error);
s = spltty();
switch (cmd) {
case TIOCSBRK:
rc->rc_pendcmd = CD180_C_SBRK;
break;
case TIOCCBRK:
rc->rc_pendcmd = CD180_C_EBRK;
break;
case TIOCSDTR:
(void) rc_modctl(rc, TIOCM_DTR, DMBIS);
break;
case TIOCCDTR:
(void) rc_modctl(rc, TIOCM_DTR, DMBIC);
break;
case TIOCMGET:
*(int *) data = rc_modctl(rc, 0, DMGET);
break;
case TIOCMSET:
(void) rc_modctl(rc, *(int *) data, DMSET);
break;
case TIOCMBIC:
(void) rc_modctl(rc, *(int *) data, DMBIC);
break;
case TIOCMBIS:
(void) rc_modctl(rc, *(int *) data, DMBIS);
break;
case TIOCMSDTRWAIT:
error = suser(p);
if (error != 0) {
splx(s);
return (error);
}
rc->rc_dtrwait = *(int *)data * hz / 100;
break;
case TIOCMGDTRWAIT:
*(int *)data = rc->rc_dtrwait * 100 / hz;
break;
default:
(void) splx(s);
return ENOTTY;
}
(void) splx(s);
return 0;
}
/* Modem control routines */
static int rc_modctl(rc, bits, cmd)
register struct rc_chans *rc;
int bits, cmd;
{
register int nec = rc->rc_rcb->rcb_addr;
u_char *dtr = &rc->rc_rcb->rcb_dtr, msvr;
rcout(CD180_CAR, rc->rc_chan);
switch (cmd) {
case DMSET:
rcout(RC_DTREG, (bits & TIOCM_DTR) ?
~(*dtr |= 1 << rc->rc_chan) :
~(*dtr &= ~(1 << rc->rc_chan)));
msvr = rcin(CD180_MSVR);
if (bits & TIOCM_RTS)
msvr |= MSVR_RTS;
else
msvr &= ~MSVR_RTS;
if (bits & TIOCM_DTR)
msvr |= MSVR_DTR;
else
msvr &= ~MSVR_DTR;
rcout(CD180_MSVR, msvr);
break;
case DMBIS:
if (bits & TIOCM_DTR)
rcout(RC_DTREG, ~(*dtr |= 1 << rc->rc_chan));
msvr = rcin(CD180_MSVR);
if (bits & TIOCM_RTS)
msvr |= MSVR_RTS;
if (bits & TIOCM_DTR)
msvr |= MSVR_DTR;
rcout(CD180_MSVR, msvr);
break;
case DMGET:
bits = TIOCM_LE;
msvr = rc->rc_msvr = rcin(CD180_MSVR);
if (msvr & MSVR_RTS)
bits |= TIOCM_RTS;
if (msvr & MSVR_CTS)
bits |= TIOCM_CTS;
if (msvr & MSVR_DSR)
bits |= TIOCM_DSR;
if (msvr & MSVR_DTR)
bits |= TIOCM_DTR;
if (msvr & MSVR_CD)
bits |= TIOCM_CD;
if (~rcin(RC_RIREG) & (1 << rc->rc_chan))
bits |= TIOCM_RI;
return bits;
case DMBIC:
if (bits & TIOCM_DTR)
rcout(RC_DTREG, ~(*dtr &= ~(1 << rc->rc_chan)));
msvr = rcin(CD180_MSVR);
if (bits & TIOCM_RTS)
msvr &= ~MSVR_RTS;
if (bits & TIOCM_DTR)
msvr &= ~MSVR_DTR;
rcout(CD180_MSVR, msvr);
break;
}
rc->rc_msvr = rcin(CD180_MSVR);
return 0;
}
/* Test the board. */
int rc_test(nec, unit)
register int nec;
int unit;
{
int chan = 0;
int i = 0, rcnt, old_level;
unsigned int iack, chipid;
unsigned short divs;
static u_char ctest[] = "\377\125\252\045\244\0\377";
#define CTLEN 8
#define ERR(s) { \
printf("rc%d: ", unit); printf s ; printf("\n"); \
(void) splx(old_level); return 1; }
struct rtest {
u_char txbuf[CD180_NFIFO]; /* TX buffer */
u_char rxbuf[CD180_NFIFO]; /* RX buffer */
int rxptr; /* RX pointer */
int txptr; /* TX pointer */
} tchans[CD180_NCHAN];
old_level = spltty();
chipid = RC_FAKEID;
/* First, reset board to inital state */
rc_hwreset(unit, nec, chipid);
divs = RC_BRD(19200);
/* Initialize channels */
for (chan = 0; chan < CD180_NCHAN; chan++) {
/* Select and reset channel */
rcout(CD180_CAR, chan);
CCRCMD(unit, chan, CCR_ResetChan);
WAITFORCCR(unit, chan);
/* Set speed */
rcout(CD180_RBPRL, divs & 0xFF);
rcout(CD180_RBPRH, divs >> 8);
rcout(CD180_TBPRL, divs & 0xFF);
rcout(CD180_TBPRH, divs >> 8);
/* set timeout value */
rcout(CD180_RTPR, 0);
/* Establish local loopback */
rcout(CD180_COR1, COR1_NOPAR | COR1_8BITS | COR1_1SB);
rcout(CD180_COR2, COR2_LLM);
rcout(CD180_COR3, CD180_NFIFO);
CCRCMD(unit, chan, CCR_CORCHG1 | CCR_CORCHG2 | CCR_CORCHG3);
CCRCMD(unit, chan, CCR_RCVREN | CCR_XMTREN);
WAITFORCCR(unit, chan);
rcout(CD180_MSVR, MSVR_RTS);
/* Fill TXBUF with test data */
for (i = 0; i < CD180_NFIFO; i++) {
tchans[chan].txbuf[i] = ctest[i];
tchans[chan].rxbuf[i] = 0;
}
tchans[chan].txptr = tchans[chan].rxptr = 0;
/* Now, start transmit */
rcout(CD180_IER, IER_TxMpty|IER_RxData);
}
/* Pseudo-interrupt poll stuff */
for (rcnt = 10000; rcnt-- > 0; rcnt--) {
i = ~(rcin(RC_BSR));
if (i & RC_BSR_TOUT)
ERR(("BSR timeout bit set\n"))
else if (i & RC_BSR_TXINT) {
iack = rcin(RC_PILR_TX);
if (iack != (GIVR_IT_TDI | chipid))
ERR(("Bad TX intr ack (%02x != %02x)\n",
iack, GIVR_IT_TDI | chipid));
chan = (rcin(CD180_GICR) & GICR_CHAN) >> GICR_LSH;
/* If no more data to transmit, disable TX intr */
if (tchans[chan].txptr >= CD180_NFIFO) {
iack = rcin(CD180_IER);
rcout(CD180_IER, iack & ~IER_TxMpty);
} else {
for (iack = tchans[chan].txptr;
iack < CD180_NFIFO; iack++)
rcout(CD180_TDR,
tchans[chan].txbuf[iack]);
tchans[chan].txptr = iack;
}
rcout(CD180_EOIR, 0);
} else if (i & RC_BSR_RXINT) {
u_char ucnt;
iack = rcin(RC_PILR_RX);
if (iack != (GIVR_IT_RGDI | chipid) &&
iack != (GIVR_IT_REI | chipid))
ERR(("Bad RX intr ack (%02x != %02x)\n",
iack, GIVR_IT_RGDI | chipid))
chan = (rcin(CD180_GICR) & GICR_CHAN) >> GICR_LSH;
ucnt = rcin(CD180_RDCR) & 0xF;
while (ucnt-- > 0) {
iack = rcin(CD180_RCSR);
if (iack & RCSR_Timeout)
break;
if (iack & 0xF)
ERR(("Bad char chan %d (RCSR = %02X)\n",
chan, iack))
if (tchans[chan].rxptr > CD180_NFIFO)
ERR(("Got extra chars chan %d\n",
chan))
tchans[chan].rxbuf[tchans[chan].rxptr++] =
rcin(CD180_RDR);
}
rcout(CD180_EOIR, 0);
}
rcout(RC_CTOUT, 0);
for (iack = chan = 0; chan < CD180_NCHAN; chan++)
if (tchans[chan].rxptr >= CD180_NFIFO)
iack++;
if (iack == CD180_NCHAN)
break;
}
for (chan = 0; chan < CD180_NCHAN; chan++) {
/* Select and reset channel */
rcout(CD180_CAR, chan);
CCRCMD(unit, chan, CCR_ResetChan);
}
if (!rcnt)
ERR(("looses characters during local loopback\n"))
/* Now, check data */
for (chan = 0; chan < CD180_NCHAN; chan++)
for (i = 0; i < CD180_NFIFO; i++)
if (ctest[i] != tchans[chan].rxbuf[i])
ERR(("data mismatch chan %d ptr %d (%d != %d)\n",
chan, i, ctest[i], tchans[chan].rxbuf[i]))
(void) splx(old_level);
return 0;
}
#ifdef RCDEBUG
static void printrcflags(rc, comment)
struct rc_chans *rc;
char *comment;
{
u_short f = rc->rc_flags;
register int nec = rc->rc_rcb->rcb_addr;
printf("rc%d/%d: %s flags: %s%s%s%s%s%s%s%s%s%s%s%s\n",
rc->rc_rcb->rcb_unit, rc->rc_chan, comment,
(f & RC_DTR_OFF)?"DTR_OFF " :"",
(f & RC_ACTOUT) ?"ACTOUT " :"",
(f & RC_RTSFLOW)?"RTSFLOW " :"",
(f & RC_CTSFLOW)?"CTSFLOW " :"",
(f & RC_DORXFER)?"DORXFER " :"",
(f & RC_DOXXFER)?"DOXXFER " :"",
(f & RC_MODCHG) ?"MODCHG " :"",
(f & RC_OSUSP) ?"OSUSP " :"",
(f & RC_OSBUSY) ?"OSBUSY " :"",
(f & RC_WAS_BUFOVFL) ?"BUFOVFL " :"",
(f & RC_WAS_SILOVFL) ?"SILOVFL " :"",
(f & RC_SEND_RDY) ?"SEND_RDY":"");
rcout(CD180_CAR, rc->rc_chan);
printf("rc%d/%d: msvr %02x ier %02x ccsr %02x\n",
rc->rc_rcb->rcb_unit, rc->rc_chan,
rcin(CD180_MSVR),
rcin(CD180_IER),
rcin(CD180_CCSR));
}
#endif /* RCDEBUG */
static void
rc_dtrwakeup(chan)
void *chan;
{
struct rc_chans *rc;
rc = (struct rc_chans *)chan;
rc->rc_flags &= ~RC_DTR_OFF;
wakeup(&rc->rc_dtrwait);
}
static void
rc_discard_output(rc)
struct rc_chans *rc;
{
disable_intr();
if (rc->rc_flags & RC_DOXXFER) {
rc_scheduled_event -= LOTS_OF_EVENTS;
rc->rc_flags &= ~RC_DOXXFER;
}
rc->rc_optr = rc->rc_obufend;
rc->rc_tp->t_state &= ~TS_BUSY;
enable_intr();
ttwwakeup(rc->rc_tp);
}
static void
rc_wakeup(chan)
void *chan;
{
timeout(rc_wakeup, (caddr_t)NULL, 1);
if (rc_scheduled_event != 0) {
int s;
s = splsofttty();
rcpoll(NULL);
splx(s);
}
}
static void
disc_optim(tp, t, rc)
struct tty *tp;
struct termios *t;
struct rc_chans *rc;
{
if (!(t->c_iflag & (ICRNL | IGNCR | IMAXBEL | INLCR | ISTRIP | IXON))
&& (!(t->c_iflag & BRKINT) || (t->c_iflag & IGNBRK))
&& (!(t->c_iflag & PARMRK)
|| (t->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK))
&& !(t->c_lflag & (ECHO | ICANON | IEXTEN | ISIG | PENDIN))
&& linesw[tp->t_line].l_rint == ttyinput)
tp->t_state |= TS_CAN_BYPASS_L_RINT;
else
tp->t_state &= ~TS_CAN_BYPASS_L_RINT;
rc->rc_hotchar = linesw[tp->t_line].l_hotchar;
}
static void
rc_wait0(nec, unit, chan, line)
int nec, unit, chan, line;
{
int rcnt;
for (rcnt = 50; rcnt && rcin(CD180_CCR); rcnt--)
DELAY(30);
if (rcnt == 0)
printf("rc%d/%d: channel command timeout, rc.c line: %d\n",
unit, chan, line);
}
Reference in New Issue View Git Blame Copy Permalink