mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-26 11:47:31 +00:00
799e5f277f
New version with improved support for WIDE SCSI using the NCR 53c825. Test for buggy secondary cache implementations. PCI Int to IRQ mapping now specified per slot.
548 lines
17 KiB
C
548 lines
17 KiB
C
/**************************************************************************
|
||
**
|
||
** $Id: ncr_reg.h,v 2.1 94/09/16 08:01:34 wolf Rel $
|
||
**
|
||
** Device driver for the NCR 53C810 PCI-SCSI-Controller.
|
||
**
|
||
** 386bsd / FreeBSD / NetBSD
|
||
**
|
||
**-------------------------------------------------------------------------
|
||
**
|
||
** Written for 386bsd and FreeBSD by
|
||
** wolf@dentaro.gun.de Wolfgang Stanglmeier
|
||
** se@mi.Uni-Koeln.de Stefan Esser
|
||
**
|
||
** Ported to NetBSD by
|
||
** mycroft@gnu.ai.mit.edu
|
||
**
|
||
**-------------------------------------------------------------------------
|
||
**
|
||
** Copyright (c) 1994 Wolfgang Stanglmeier. All rights reserved.
|
||
**
|
||
** Redistribution and use in source and binary forms, with or without
|
||
** modification, are permitted provided that the following conditions
|
||
** are met:
|
||
** 1. Redistributions of source code must retain the above copyright
|
||
** notice, this list of conditions and the following disclaimer.
|
||
** 2. Redistributions in binary form must reproduce the above copyright
|
||
** notice, this list of conditions and the following disclaimer in the
|
||
** documentation and/or other materials provided with the distribution.
|
||
** 3. The name of the author may not be used to endorse or promote products
|
||
** derived from this software without specific prior written permission.
|
||
**
|
||
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
||
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
||
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
||
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
||
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
||
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
||
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
||
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
**
|
||
**-------------------------------------------------------------------------
|
||
*/
|
||
|
||
#ifndef __NCR_REG_H__
|
||
#define __NCR_REG_H__
|
||
|
||
|
||
/*-----------------------------------------------------------------
|
||
**
|
||
** The ncr 53c810 register structure.
|
||
**
|
||
**-----------------------------------------------------------------
|
||
*/
|
||
|
||
struct ncr_reg {
|
||
/*00*/ u_char nc_scntl0; /* full arb., ena parity, par->ATN */
|
||
|
||
/*01*/ u_char nc_scntl1; /* no reset */
|
||
#define ISCON 0x10 /* connected to scsi */
|
||
#define CRST 0x08 /* force reset */
|
||
|
||
/*02*/ u_char nc_scntl2; /* no disconnect expected */
|
||
#define SDU 0x80 /* cmd: disconnect will raise error */
|
||
#define CHM 0x40 /* sta: chained mode */
|
||
#define WSS 0x08 /* sta: wide scsi send [W]*/
|
||
#define WSR 0x01 /* sta: wide scsi received [W]*/
|
||
|
||
/*03*/ u_char nc_scntl3; /* cnf system clock dependent */
|
||
#define EWS 0x08 /* cmd: enable wide scsi [W]*/
|
||
|
||
/*04*/ u_char nc_scid; /* cnf host adapter scsi address */
|
||
#define RRE 0x40 /* r/w:e enable response to resel. */
|
||
#define SRE 0x20 /* r/w:e enable response to select */
|
||
|
||
/*05*/ u_char nc_sxfer; /* ### Sync speed and count */
|
||
|
||
/*06*/ u_char nc_sdid; /* ### Destination-ID */
|
||
|
||
/*07*/ u_char nc_gpreg; /* ??? IO-Pins */
|
||
|
||
/*08*/ u_char nc_sfbr; /* ### First byte in phase */
|
||
|
||
/*09*/ u_char nc_socl;
|
||
#define CREQ 0x80 /* r/w: SCSI-REQ */
|
||
#define CACK 0x40 /* r/w: SCSI-ACK */
|
||
#define CBSY 0x20 /* r/w: SCSI-BSY */
|
||
#define CSEL 0x10 /* r/w: SCSI-SEL */
|
||
#define CATN 0x08 /* r/w: SCSI-ATN */
|
||
#define CMSG 0x04 /* r/w: SCSI-MSG */
|
||
#define CC_D 0x02 /* r/w: SCSI-C_D */
|
||
#define CI_O 0x01 /* r/w: SCSI-I_O */
|
||
|
||
/*0a*/ u_char nc_ssid;
|
||
|
||
/*0b*/ u_char nc_sbcl;
|
||
|
||
/*0c*/ u_char nc_dstat;
|
||
#define DFE 0x80 /* sta: dma fifo empty */
|
||
#define MDPE 0x40 /* int: master data parity error */
|
||
#define BF 0x20 /* int: script: bus fault */
|
||
#define ABRT 0x10 /* int: script: command aborted */
|
||
#define SSI 0x08 /* int: script: single step */
|
||
#define SIR 0x04 /* int: script: interrupt instruct. */
|
||
#define IID 0x01 /* int: script: illegal instruct. */
|
||
|
||
/*0d*/ u_char nc_sstat0;
|
||
#define ILF 0x80 /* sta: data in SIDL register lsb */
|
||
#define ORF 0x40 /* sta: data in SODR register lsb */
|
||
#define OLF 0x20 /* sta: data in SODL register lsb */
|
||
#define AIP 0x10 /* sta: arbitration in progress */
|
||
#define LOA 0x08 /* sta: arbitration lost */
|
||
#define WOA 0x04 /* sta: arbitration won */
|
||
#define IRST 0x02 /* sta: scsi reset signal */
|
||
#define SDP 0x01 /* sta: scsi parity signal */
|
||
|
||
/*0e*/ u_char nc_sstat1;
|
||
#define FF3210 0xf0 /* sta: bytes in the scsi fifo */
|
||
|
||
/*0f*/ u_char nc_sstat2;
|
||
#define ILF1 0x80 /* sta: data in SIDL register msb[W]*/
|
||
#define ORF1 0x40 /* sta: data in SODR register msb[W]*/
|
||
#define OLF1 0x20 /* sta: data in SODL register msb[W]*/
|
||
|
||
/*10*/ u_long nc_dsa; /* --> Base page */
|
||
|
||
/*14*/ u_char nc_istat; /* --> Main Command and status */
|
||
#define CABRT 0x80 /* cmd: abort current operation */
|
||
#define SRST 0x40 /* mod: reset chip */
|
||
#define SIGP 0x20 /* r/w: message from host to ncr */
|
||
#define SEM 0x10 /* r/w: message between host + ncr */
|
||
#define CON 0x08 /* sta: connected to scsi */
|
||
#define INTF 0x04 /* sta: int on the fly (reset by wr)*/
|
||
#define SIP 0x02 /* sta: scsi-interupt */
|
||
#define DIP 0x01 /* sta: host/script interupt */
|
||
|
||
/*15*/ u_char nc_15_;
|
||
/*16*/ u_char nc_16_;
|
||
/*17*/ u_char nc_17_;
|
||
|
||
/*18*/ u_char nc_ctest0;
|
||
/*19*/ u_char nc_ctest1;
|
||
|
||
/*1a*/ u_char nc_ctest2;
|
||
#define CSIGP 0x40
|
||
|
||
/*1b*/ u_char nc_ctest3;
|
||
#define CLF 0x04 /* clear scsi fifo */
|
||
|
||
/*1c*/ u_long nc_temp; /* ### Temporary stack */
|
||
|
||
/*20*/ u_char nc_dfifo;
|
||
/*21*/ u_char nc_ctest4;
|
||
/*22*/ u_char nc_ctest5;
|
||
/*23*/ u_char nc_ctest6;
|
||
|
||
/*24*/ u_long nc_dbc; /* ### Byte count and command */
|
||
/*28*/ u_long nc_dnad; /* ### Next command register */
|
||
/*2c*/ u_long nc_dsp; /* --> Script Pointer */
|
||
/*30*/ u_long nc_dsps; /* --> Script pointer save/opcode#2 */
|
||
/*34*/ u_long nc_scratcha; /* ??? Temporary register a */
|
||
|
||
/*38*/ u_char nc_dmode;
|
||
/*39*/ u_char nc_dien;
|
||
/*3a*/ u_char nc_dwt;
|
||
|
||
/*3b*/ u_char nc_dcntl; /* --> Script execution control */
|
||
#define SSM 0x10 /* mod: single step mode */
|
||
#define STD 0x04 /* cmd: start dma mode */
|
||
#define NOCOM 0x01 /* cmd: protect sfbr while reselect */
|
||
|
||
/*3c*/ u_long nc_adder;
|
||
|
||
/*40*/ u_short nc_sien; /* -->: interupt enable */
|
||
/*42*/ u_short nc_sist; /* <--: interupt status */
|
||
#define STO 0x0400/* sta: timeout (select) */
|
||
#define GEN 0x0200/* sta: timeout (general) */
|
||
#define HTH 0x0100/* sta: timeout (handshake) */
|
||
#define MA 0x80 /* sta: phase mismatch */
|
||
#define CMP 0x40 /* sta: arbitration complete */
|
||
#define SEL 0x20 /* sta: selected by another device */
|
||
#define RSL 0x10 /* sta: reselected by another device*/
|
||
#define SGE 0x08 /* sta: gross error (over/underflow)*/
|
||
#define UDC 0x04 /* sta: unexpected disconnect */
|
||
#define RST 0x02 /* sta: scsi bus reset detected */
|
||
#define PAR 0x01 /* sta: scsi parity error */
|
||
|
||
/*44*/ u_char nc_slpar;
|
||
/*45*/ u_char nc_swide;
|
||
/*46*/ u_char nc_macntl;
|
||
/*47*/ u_char nc_gpcntl;
|
||
/*48*/ u_char nc_stime0; /* cmd: timeout for select&handshake*/
|
||
/*49*/ u_char nc_stime1; /* cmd: timeout user defined */
|
||
/*4a*/ u_short nc_respid; /* sta: Reselect-IDs */
|
||
|
||
/*4c*/ u_char nc_stest0;
|
||
|
||
/*4d*/ u_char nc_stest1;
|
||
|
||
/*4e*/ u_char nc_stest2;
|
||
#define ROF 0x40 /* reset scsi offset (after gross error!) */
|
||
#define EXT 0x02 /* extended filtering */
|
||
|
||
/*4f*/ u_char nc_stest3;
|
||
#define TE 0x80 /* c: tolerAnt enable */
|
||
#define CSF 0x02 /* c: clear scsi fifo */
|
||
|
||
/*50*/ u_short nc_sidl; /* Lowlevel: latched from scsi data */
|
||
/*52*/ u_short nc_52_;
|
||
/*54*/ u_short nc_sodl; /* Lowlevel: data out to scsi data */
|
||
/*56*/ u_short nc_56_;
|
||
/*58*/ u_short nc_sbdl; /* Lowlevel: data from scsi data */
|
||
/*5a*/ u_short nc_5a_;
|
||
/*5c*/ u_char nc_scr0; /* Working register B */
|
||
/*5d*/ u_char nc_scr1; /* */
|
||
/*5e*/ u_char nc_scr2; /* */
|
||
/*5f*/ u_char nc_scr3; /* */
|
||
/*60*/
|
||
};
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Utility macros for the script.
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define REGJ(p,r) (offsetof(struct ncr_reg, p ## r))
|
||
#define REG(r) REGJ (nc_, r)
|
||
|
||
#ifndef TARGET_MODE
|
||
#define TARGET_MODE 0
|
||
#endif
|
||
|
||
typedef unsigned long ncrcmd;
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** SCSI phases
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define SCR_DATA_OUT 0x00000000
|
||
#define SCR_DATA_IN 0x01000000
|
||
#define SCR_COMMAND 0x02000000
|
||
#define SCR_STATUS 0x03000000
|
||
#define SCR_ILG_OUT 0x04000000
|
||
#define SCR_ILG_IN 0x05000000
|
||
#define SCR_MSG_OUT 0x06000000
|
||
#define SCR_MSG_IN 0x07000000
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Data transfer via SCSI.
|
||
**
|
||
**-----------------------------------------------------------
|
||
**
|
||
** MOVE_ABS (LEN)
|
||
** <<start address>>
|
||
**
|
||
** MOVE_IND (LEN)
|
||
** <<dnad_offset>>
|
||
**
|
||
** MOVE_TBL
|
||
** <<dnad_offset>>
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define SCR_MOVE_ABS(l) ((0x08000000 ^ (TARGET_MODE << 1ul)) | (l))
|
||
#define SCR_MOVE_IND(l) ((0x28000000 ^ (TARGET_MODE << 1ul)) | (l))
|
||
#define SCR_MOVE_TBL (0x18000000 ^ (TARGET_MODE << 1ul))
|
||
|
||
struct scr_tblmove {
|
||
u_long size;
|
||
u_long addr;
|
||
};
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Selection
|
||
**
|
||
**-----------------------------------------------------------
|
||
**
|
||
** SEL_ABS | SCR_ID (0..7) [ | REL_JMP]
|
||
** <<alternate_address>>
|
||
**
|
||
** SEL_TBL | << dnad_offset>> [ | REL_JMP]
|
||
** <<alternate_address>>
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define SCR_SEL_ABS 0x40000000
|
||
#define SCR_SEL_ABS_ATN 0x41000000
|
||
#define SCR_SEL_TBL 0x42000000
|
||
#define SCR_SEL_TBL_ATN 0x43000000
|
||
|
||
struct scr_tblsel {
|
||
u_char sel_0;
|
||
u_char sel_sxfer;
|
||
u_char sel_id;
|
||
u_char sel_scntl3;
|
||
};
|
||
|
||
#define SCR_JMP_REL 0x04000000
|
||
#define SCR_ID(id) (((u_long)(id)) << 16)
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Waiting for Disconnect or Reselect
|
||
**
|
||
**-----------------------------------------------------------
|
||
**
|
||
** WAIT_DISC
|
||
** dummy: <<alternate_address>>
|
||
**
|
||
** WAIT_RESEL
|
||
** <<alternate_address>>
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define SCR_WAIT_DISC 0x48000000
|
||
#define SCR_WAIT_RESEL 0x50000000
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Bit Set / Reset
|
||
**
|
||
**-----------------------------------------------------------
|
||
**
|
||
** SET (flags {|.. })
|
||
**
|
||
** CLR (flags {|.. })
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define SCR_SET(f) (0x58000000 | (f))
|
||
#define SCR_CLR(f) (0x60000000 | (f))
|
||
|
||
#define SCR_CARRY 0x00000400
|
||
#define SCR_TRG 0x00000200
|
||
#define SCR_ACK 0x00000040
|
||
#define SCR_ATN 0x00000008
|
||
|
||
|
||
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Memory to memory move
|
||
**
|
||
**-----------------------------------------------------------
|
||
**
|
||
** COPY (bytecount)
|
||
** << source_address >>
|
||
** << destination_address >>
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define SCR_COPY(n) (0xc0000000 | (n))
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Register move and binary operations
|
||
**
|
||
**-----------------------------------------------------------
|
||
**
|
||
** SFBR_REG (reg, op, data) reg = SFBR op data
|
||
** << 0 >>
|
||
**
|
||
** REG_SFBR (reg, op, data) SFBR = reg op data
|
||
** << 0 >>
|
||
**
|
||
** REG_REG (reg, op, data) reg = reg op data
|
||
** << 0 >>
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define SCR_REG_OFS(ofs) ((ofs) << 16ul)
|
||
|
||
#define SCR_SFBR_REG(reg,op,data) \
|
||
(0x68000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul))
|
||
|
||
#define SCR_REG_SFBR(reg,op,data) \
|
||
(0x70000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul))
|
||
|
||
#define SCR_REG_REG(reg,op,data) \
|
||
(0x78000000 | (SCR_REG_OFS(REG(reg))) | (op) | ((data)<<8ul))
|
||
|
||
|
||
#define SCR_LOAD 0x00000000
|
||
#define SCR_SHL 0x01000000
|
||
#define SCR_OR 0x02000000
|
||
#define SCR_XOR 0x03000000
|
||
#define SCR_AND 0x04000000
|
||
#define SCR_SHR 0x05000000
|
||
#define SCR_ADD 0x06000000
|
||
#define SCR_ADDC 0x07000000
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** FROM_REG (reg) reg = SFBR
|
||
** << 0 >>
|
||
**
|
||
** TO_REG (reg) SFBR = reg
|
||
** << 0 >>
|
||
**
|
||
** LOAD_REG (reg, data) reg = <data>
|
||
** << 0 >>
|
||
**
|
||
** LOAD_SFBR(data) SFBR = <data>
|
||
** << 0 >>
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define SCR_FROM_REG(reg) \
|
||
SCR_REG_SFBR(reg,SCR_OR,0)
|
||
|
||
#define SCR_TO_REG(reg) \
|
||
SCR_SFBR_REG(reg,SCR_OR,0)
|
||
|
||
#define SCR_LOAD_REG(reg,data) \
|
||
SCR_REG_REG(reg,SCR_LOAD,data)
|
||
|
||
#define SCR_LOAD_SFBR(data) \
|
||
(SCR_REG_SFBR (gpreg, SCR_LOAD, data))
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** Waiting for Disconnect or Reselect
|
||
**
|
||
**-----------------------------------------------------------
|
||
**
|
||
** JUMP [ | IFTRUE/IFFALSE ( ... ) ]
|
||
** <<address>>
|
||
**
|
||
** JUMPR [ | IFTRUE/IFFALSE ( ... ) ]
|
||
** <<distance>>
|
||
**
|
||
** CALL [ | IFTRUE/IFFALSE ( ... ) ]
|
||
** <<address>>
|
||
**
|
||
** CALLR [ | IFTRUE/IFFALSE ( ... ) ]
|
||
** <<distance>>
|
||
**
|
||
** RETURN [ | IFTRUE/IFFALSE ( ... ) ]
|
||
** <<dummy>>
|
||
**
|
||
** INT [ | IFTRUE/IFFALSE ( ... ) ]
|
||
** <<ident>>
|
||
**
|
||
** INT_FLY [ | IFTRUE/IFFALSE ( ... ) ]
|
||
** <<ident>>
|
||
**
|
||
** Conditions:
|
||
** WHEN (phase)
|
||
** IF (phase)
|
||
** CARRY
|
||
** DATA (data, mask)
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
#define SCR_JUMP 0x80080000
|
||
#define SCR_JUMPR 0x80880000
|
||
#define SCR_CALL 0x88080000
|
||
#define SCR_CALLR 0x88880000
|
||
#define SCR_RETURN 0x90080000
|
||
#define SCR_INT 0x98080000
|
||
#define SCR_INT_FLY 0x98180000
|
||
|
||
#define IFFALSE(arg) (0x00080000 | (arg))
|
||
#define IFTRUE(arg) (0x00000000 | (arg))
|
||
|
||
#define WHEN(phase) (0x00030000 | (phase))
|
||
#define IF(phase) (0x00020000 | (phase))
|
||
|
||
#define DATA(D) (0x00040000 | ((D) & 0xff))
|
||
#define MASK(D,M) (0x00040000 | (((M ^ 0xff) & 0xff) << 8ul)|((D) & 0xff))
|
||
|
||
#define CARRYSET (0x00200000)
|
||
|
||
/*-----------------------------------------------------------
|
||
**
|
||
** SCSI constants.
|
||
**
|
||
**-----------------------------------------------------------
|
||
*/
|
||
|
||
/*
|
||
** Messages
|
||
*/
|
||
|
||
#define M_COMPLETE (0x00)
|
||
#define M_EXTENDED (0x01)
|
||
#define M_SAVE_DP (0x02)
|
||
#define M_RESTORE_DP (0x03)
|
||
#define M_DISCONNECT (0x04)
|
||
#define M_ID_ERROR (0x05)
|
||
#define M_ABORT (0x06)
|
||
#define M_REJECT (0x07)
|
||
#define M_NOOP (0x08)
|
||
#define M_PARITY (0x09)
|
||
#define M_LCOMPLETE (0x0a)
|
||
#define M_FCOMPLETE (0x0b)
|
||
#define M_RESET (0x0c)
|
||
#define M_ABORT_TAG (0x0d)
|
||
#define M_CLEAR_QUEUE (0x0e)
|
||
#define M_INIT_REC (0x0f)
|
||
#define M_REL_REC (0x10)
|
||
#define M_TERMINATE (0x11)
|
||
#define M_SIMPLE_TAG (0x20)
|
||
#define M_HEAD_TAG (0x21)
|
||
#define M_ORDERED_TAG (0x22)
|
||
#define M_IGN_RESIDUE (0x23)
|
||
#define M_IDENTIFY (0x80)
|
||
|
||
#define M_X_MODIFY_DP (0x00)
|
||
#define M_X_SYNC_REQ (0x01)
|
||
#define M_X_WIDE_REQ (0x03)
|
||
|
||
/*
|
||
** Status
|
||
*/
|
||
|
||
#define S_GOOD (0x00)
|
||
#define S_CHECK_COND (0x02)
|
||
#define S_COND_MET (0x04)
|
||
#define S_BUSY (0x08)
|
||
#define S_INT (0x10)
|
||
#define S_INT_COND_MET (0x14)
|
||
#define S_CONFLICT (0x18)
|
||
#define S_TERMINATED (0x20)
|
||
#define S_QUEUE_FULL (0x28)
|
||
#define S_ILLEGAL (0xff)
|
||
#define S_SENSE (0x80)
|
||
|
||
#endif /*__NCR_REG_H__*/
|