1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-19 10:53:58 +00:00
freebsd/usr.sbin/watchdogd/watchdogd.c
Xin LI dad6df6124 Default to use 10 seconds as nap interval instead of 1.
Previously, we have a nap interval of 1 second while we have a timeout of
128 seconds by default, which could be an overkill, and for some hardware
the patting action may be expensive.

Note that the choice of nap interval is still arbitrary.  We preferred
a safe value where even when the system is very heavily loaded, the
watchdog should not shoot the system down if it's not really hung.
According to the manual page of Linux's watchdog daemon, the nap interval
time of theirs is 10 seconds, which seems to be a reasonable value --
according to Intel documentation AP-725 (Document Number: 292273-001),
ICH5's maximum timeout is about 37.5 seconds, which the ichwd(4) driver
would set when we requested 128 seconds (although it should probably
feed back this as an error and do not set the timeout).  Since that's
the shortest maximum value, 10 seconds seems to be a right choice for
us too.

Discussed with:	alfred
MFC after:	1 month
2014-11-16 09:44:30 +00:00

787 lines
18 KiB
C

/*-
* Copyright (c) 2003-2004 Sean M. Kelly <smkelly@FreeBSD.org>
* Copyright (c) 2013 iXsystems.com,
* author: Alfred Perlstein <alfred@freebsd.org>
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Software watchdog daemon.
*/
#include <sys/types.h>
__FBSDID("$FreeBSD$");
#include <sys/mman.h>
#include <sys/param.h>
#include <sys/rtprio.h>
#include <sys/stat.h>
#include <sys/time.h>
#include <sys/sysctl.h>
#include <sys/watchdog.h>
#include <err.h>
#include <errno.h>
#include <fcntl.h>
#include <libutil.h>
#include <math.h>
#include <paths.h>
#include <signal.h>
#include <stdio.h>
#include <stdint.h>
#include <stdlib.h>
#include <string.h>
#include <strings.h>
#include <sysexits.h>
#include <syslog.h>
#include <unistd.h>
#include <getopt.h>
static long fetchtimeout(int opt,
const char *longopt, const char *myoptarg, int zero_ok);
static void parseargs(int, char *[]);
static int seconds_to_pow2ns(int);
static void sighandler(int);
static void watchdog_loop(void);
static int watchdog_init(void);
static int watchdog_onoff(int onoff);
static int watchdog_patpat(u_int timeout);
static void usage(void);
static int tstotv(struct timeval *tv, struct timespec *ts);
static int tvtohz(struct timeval *tv);
static int debugging = 0;
static int end_program = 0;
static const char *pidfile = _PATH_VARRUN "watchdogd.pid";
static u_int timeout = WD_TO_128SEC;
static u_int pretimeout = 0;
static u_int timeout_sec;
static u_int passive = 0;
static int is_daemon = 0;
static int is_dry_run = 0; /* do not arm the watchdog, only
report on timing of the watch
program */
static int do_timedog = 0;
static int do_syslog = 1;
static int fd = -1;
static int nap = 10;
static int carp_thresh_seconds = -1;
static char *test_cmd = NULL;
static const char *getopt_shortopts;
static int pretimeout_set;
static int pretimeout_act;
static int pretimeout_act_set;
static int softtimeout_set;
static int softtimeout_act;
static int softtimeout_act_set;
static struct option longopts[] = {
{ "debug", no_argument, &debugging, 1 },
{ "pretimeout", required_argument, &pretimeout_set, 1 },
{ "pretimeout-action", required_argument, &pretimeout_act_set, 1 },
{ "softtimeout", no_argument, &softtimeout_set, 1 },
{ "softtimeout-action", required_argument, &softtimeout_act_set, 1 },
{ NULL, 0, NULL, 0}
};
/*
* Ask malloc() to map minimum-sized chunks of virtual address space at a time,
* so that mlockall() won't needlessly wire megabytes of unused memory into the
* process. This must be done using the malloc_conf string so that it gets set
* up before the first allocation, which happens before entry to main().
*/
const char * malloc_conf = "lg_chunk:0";
/*
* Periodically pat the watchdog, preventing it from firing.
*/
int
main(int argc, char *argv[])
{
struct rtprio rtp;
struct pidfh *pfh;
pid_t otherpid;
if (getuid() != 0)
errx(EX_SOFTWARE, "not super user");
parseargs(argc, argv);
if (do_syslog)
openlog("watchdogd", LOG_CONS|LOG_NDELAY|LOG_PERROR,
LOG_DAEMON);
rtp.type = RTP_PRIO_REALTIME;
rtp.prio = 0;
if (rtprio(RTP_SET, 0, &rtp) == -1)
err(EX_OSERR, "rtprio");
if (!is_dry_run && watchdog_init() == -1)
errx(EX_SOFTWARE, "unable to initialize watchdog");
if (is_daemon) {
if (watchdog_onoff(1) == -1)
err(EX_OSERR, "patting the dog");
pfh = pidfile_open(pidfile, 0600, &otherpid);
if (pfh == NULL) {
if (errno == EEXIST) {
watchdog_onoff(0);
errx(EX_SOFTWARE, "%s already running, pid: %d",
getprogname(), otherpid);
}
warn("Cannot open or create pidfile");
}
if (debugging == 0 && daemon(0, 0) == -1) {
watchdog_onoff(0);
pidfile_remove(pfh);
err(EX_OSERR, "daemon");
}
signal(SIGHUP, SIG_IGN);
signal(SIGINT, sighandler);
signal(SIGTERM, sighandler);
pidfile_write(pfh);
if (madvise(0, 0, MADV_PROTECT) != 0)
warn("madvise failed");
if (mlockall(MCL_CURRENT | MCL_FUTURE) != 0)
warn("mlockall failed");
watchdog_loop();
/* exiting */
pidfile_remove(pfh);
return (EX_OK);
} else {
if (passive)
timeout |= WD_PASSIVE;
else
timeout |= WD_ACTIVE;
if (watchdog_patpat(timeout) < 0)
err(EX_OSERR, "patting the dog");
return (EX_OK);
}
}
static void
pow2ns_to_ts(int pow2ns, struct timespec *ts)
{
uint64_t ns;
ns = 1ULL << pow2ns;
ts->tv_sec = ns / 1000000000ULL;
ts->tv_nsec = ns % 1000000000ULL;
}
/*
* Convert a timeout in seconds to N where 2^N nanoseconds is close to
* "seconds".
*
* The kernel expects the timeouts for watchdogs in "2^N nanosecond format".
*/
static u_int
parse_timeout_to_pow2ns(char opt, const char *longopt, const char *myoptarg)
{
double a;
u_int rv;
struct timespec ts;
struct timeval tv;
int ticks;
char shortopt[] = "- ";
if (!longopt)
shortopt[1] = opt;
a = fetchtimeout(opt, longopt, myoptarg, 1);
if (a == 0)
rv = WD_TO_NEVER;
else
rv = seconds_to_pow2ns(a);
pow2ns_to_ts(rv, &ts);
tstotv(&tv, &ts);
ticks = tvtohz(&tv);
if (debugging) {
printf("Timeout for %s%s "
"is 2^%d nanoseconds "
"(in: %s sec -> out: %jd sec %ld ns -> %d ticks)\n",
longopt ? "-" : "", longopt ? longopt : shortopt,
rv,
myoptarg, (intmax_t)ts.tv_sec, ts.tv_nsec, ticks);
}
if (ticks <= 0) {
errx(1, "Timeout for %s%s is too small, please choose a higher timeout.", longopt ? "-" : "", longopt ? longopt : shortopt);
}
return (rv);
}
/*
* Catch signals and begin shutdown process.
*/
static void
sighandler(int signum)
{
if (signum == SIGINT || signum == SIGTERM)
end_program = 1;
}
/*
* Open the watchdog device.
*/
static int
watchdog_init(void)
{
if (is_dry_run)
return 0;
fd = open("/dev/" _PATH_WATCHDOG, O_RDWR);
if (fd >= 0)
return (0);
warn("Could not open watchdog device");
return (-1);
}
/*
* If we are doing timing, then get the time.
*/
static int
watchdog_getuptime(struct timespec *tp)
{
int error;
if (!do_timedog)
return 0;
error = clock_gettime(CLOCK_UPTIME_FAST, tp);
if (error)
warn("clock_gettime");
return (error);
}
static long
watchdog_check_dogfunction_time(struct timespec *tp_start,
struct timespec *tp_end)
{
struct timeval tv_start, tv_end, tv_now, tv;
const char *cmd_prefix, *cmd;
struct timespec tp_now;
int sec;
if (!do_timedog)
return (0);
TIMESPEC_TO_TIMEVAL(&tv_start, tp_start);
TIMESPEC_TO_TIMEVAL(&tv_end, tp_end);
timersub(&tv_end, &tv_start, &tv);
sec = tv.tv_sec;
if (sec < carp_thresh_seconds)
return (sec);
if (test_cmd) {
cmd_prefix = "Watchdog program";
cmd = test_cmd;
} else {
cmd_prefix = "Watchdog operation";
cmd = "stat(\"/etc\", &sb)";
}
if (do_syslog)
syslog(LOG_CRIT, "%s: '%s' took too long: "
"%d.%06ld seconds >= %d seconds threshold",
cmd_prefix, cmd, sec, (long)tv.tv_usec,
carp_thresh_seconds);
else
warnx("%s: '%s' took too long: "
"%d.%06ld seconds >= %d seconds threshold",
cmd_prefix, cmd, sec, (long)tv.tv_usec,
carp_thresh_seconds);
/*
* Adjust the sleep interval again in case syslog(3) took a non-trivial
* amount of time to run.
*/
if (watchdog_getuptime(&tp_now))
return (sec);
TIMESPEC_TO_TIMEVAL(&tv_now, &tp_now);
timersub(&tv_now, &tv_start, &tv);
sec = tv.tv_sec;
return (sec);
}
/*
* Main program loop which is iterated every second.
*/
static void
watchdog_loop(void)
{
struct timespec ts_start, ts_end;
struct stat sb;
long waited;
int error, failed;
while (end_program != 2) {
failed = 0;
error = watchdog_getuptime(&ts_start);
if (error) {
end_program = 1;
goto try_end;
}
if (test_cmd != NULL)
failed = system(test_cmd);
else
failed = stat("/etc", &sb);
error = watchdog_getuptime(&ts_end);
if (error) {
end_program = 1;
goto try_end;
}
if (failed == 0)
watchdog_patpat(timeout|WD_ACTIVE);
waited = watchdog_check_dogfunction_time(&ts_start, &ts_end);
if (nap - waited > 0)
sleep(nap - waited);
try_end:
if (end_program != 0) {
if (watchdog_onoff(0) == 0) {
end_program = 2;
} else {
warnx("Could not stop the watchdog, not exiting");
end_program = 0;
}
}
}
}
/*
* Reset the watchdog timer. This function must be called periodically
* to keep the watchdog from firing.
*/
static int
watchdog_patpat(u_int t)
{
if (is_dry_run)
return 0;
return ioctl(fd, WDIOCPATPAT, &t);
}
/*
* Toggle the kernel's watchdog. This routine is used to enable and
* disable the watchdog.
*/
static int
watchdog_onoff(int onoff)
{
int error;
/* fake successful watchdog op if a dry run */
if (is_dry_run)
return 0;
if (onoff) {
/*
* Call the WDIOC_SETSOFT regardless of softtimeout_set
* because we'll need to turn it off if someone had turned
* it on.
*/
error = ioctl(fd, WDIOC_SETSOFT, &softtimeout_set);
if (error) {
warn("setting WDIOC_SETSOFT %d", softtimeout_set);
return (error);
}
error = watchdog_patpat((timeout|WD_ACTIVE));
if (error) {
warn("watchdog_patpat failed");
goto failsafe;
}
if (softtimeout_act_set) {
error = ioctl(fd, WDIOC_SETSOFTTIMEOUTACT,
&softtimeout_act);
if (error) {
warn("setting WDIOC_SETSOFTTIMEOUTACT %d",
softtimeout_act);
goto failsafe;
}
}
if (pretimeout_set) {
error = ioctl(fd, WDIOC_SETPRETIMEOUT, &pretimeout);
if (error) {
warn("setting WDIOC_SETPRETIMEOUT %d",
pretimeout);
goto failsafe;
}
}
if (pretimeout_act_set) {
error = ioctl(fd, WDIOC_SETPRETIMEOUTACT,
&pretimeout_act);
if (error) {
warn("setting WDIOC_SETPRETIMEOUTACT %d",
pretimeout_act);
goto failsafe;
}
}
/* pat one more time for good measure */
return watchdog_patpat((timeout|WD_ACTIVE));
} else {
return watchdog_patpat(0);
}
failsafe:
watchdog_patpat(0);
return (error);
}
/*
* Tell user how to use the program.
*/
static void
usage(void)
{
if (is_daemon)
fprintf(stderr, "usage:\n"
" watchdogd [-dnSw] [-e cmd] [-I file] [-s sleep] [-t timeout]\n"
" [-T script_timeout]\n"
" [--debug]\n"
" [--pretimeout seconds] [-pretimeout-action action]\n"
" [--softtimeout] [-softtimeout-action action]\n"
);
else
fprintf(stderr, "usage: watchdog [-d] [-t timeout]\n");
exit(EX_USAGE);
}
static long
fetchtimeout(int opt, const char *longopt, const char *myoptarg, int zero_ok)
{
const char *errstr;
char *p;
long rv;
errstr = NULL;
p = NULL;
errno = 0;
rv = strtol(myoptarg, &p, 0);
if ((p != NULL && *p != '\0') || errno != 0)
errstr = "is not a number";
if (rv < 0 || (!zero_ok && rv == 0))
errstr = "must be greater than zero";
if (errstr) {
if (longopt)
errx(EX_USAGE, "--%s argument %s", longopt, errstr);
else
errx(EX_USAGE, "-%c argument %s", opt, errstr);
}
return (rv);
}
struct act_tbl {
const char *at_act;
int at_value;
};
static const struct act_tbl act_tbl[] = {
{ "panic", WD_SOFT_PANIC },
{ "ddb", WD_SOFT_DDB },
{ "log", WD_SOFT_LOG },
{ "printf", WD_SOFT_PRINTF },
{ NULL, 0 }
};
static void
timeout_act_error(const char *lopt, const char *badact)
{
char *opts, *oldopts;
int i;
opts = NULL;
for (i = 0; act_tbl[i].at_act != NULL; i++) {
oldopts = opts;
if (asprintf(&opts, "%s%s%s",
oldopts == NULL ? "" : oldopts,
oldopts == NULL ? "" : ", ",
act_tbl[i].at_act) == -1)
err(EX_OSERR, "malloc");
free(oldopts);
}
warnx("bad --%s argument '%s' must be one of (%s).",
lopt, badact, opts);
usage();
}
/*
* Take a comma separated list of actions and or the flags
* together for the ioctl.
*/
static int
timeout_act_str2int(const char *lopt, const char *acts)
{
int i;
char *dupacts, *tofree;
char *o;
int rv = 0;
tofree = dupacts = strdup(acts);
if (!tofree)
err(EX_OSERR, "malloc");
while ((o = strsep(&dupacts, ",")) != NULL) {
for (i = 0; act_tbl[i].at_act != NULL; i++) {
if (!strcmp(o, act_tbl[i].at_act)) {
rv |= act_tbl[i].at_value;
break;
}
}
if (act_tbl[i].at_act == NULL)
timeout_act_error(lopt, o);
}
free(tofree);
return rv;
}
int
tstotv(struct timeval *tv, struct timespec *ts)
{
tv->tv_sec = ts->tv_sec;
tv->tv_usec = ts->tv_nsec / 1000;
return 0;
}
/*
* Convert a timeval to a number of ticks.
* Mostly copied from the kernel.
*/
int
tvtohz(struct timeval *tv)
{
register unsigned long ticks;
register long sec, usec;
int hz;
size_t hzsize;
int error;
int tick;
hzsize = sizeof(hz);
error = sysctlbyname("kern.hz", &hz, &hzsize, NULL, 0);
if (error)
err(1, "sysctlbyname kern.hz");
tick = 1000000 / hz;
/*
* If the number of usecs in the whole seconds part of the time
* difference fits in a long, then the total number of usecs will
* fit in an unsigned long. Compute the total and convert it to
* ticks, rounding up and adding 1 to allow for the current tick
* to expire. Rounding also depends on unsigned long arithmetic
* to avoid overflow.
*
* Otherwise, if the number of ticks in the whole seconds part of
* the time difference fits in a long, then convert the parts to
* ticks separately and add, using similar rounding methods and
* overflow avoidance. This method would work in the previous
* case but it is slightly slower and assumes that hz is integral.
*
* Otherwise, round the time difference down to the maximum
* representable value.
*
* If ints have 32 bits, then the maximum value for any timeout in
* 10ms ticks is 248 days.
*/
sec = tv->tv_sec;
usec = tv->tv_usec;
if (usec < 0) {
sec--;
usec += 1000000;
}
if (sec < 0) {
#ifdef DIAGNOSTIC
if (usec > 0) {
sec++;
usec -= 1000000;
}
printf("tvotohz: negative time difference %ld sec %ld usec\n",
sec, usec);
#endif
ticks = 1;
} else if (sec <= LONG_MAX / 1000000)
ticks = (sec * 1000000 + (unsigned long)usec + (tick - 1))
/ tick + 1;
else if (sec <= LONG_MAX / hz)
ticks = sec * hz
+ ((unsigned long)usec + (tick - 1)) / tick + 1;
else
ticks = LONG_MAX;
if (ticks > INT_MAX)
ticks = INT_MAX;
return ((int)ticks);
}
static int
seconds_to_pow2ns(int seconds)
{
uint64_t power;
uint64_t ns;
uint64_t shifted;
if (seconds <= 0)
errx(1, "seconds %d < 0", seconds);
ns = ((uint64_t)seconds) * 1000000000ULL;
power = flsll(ns);
shifted = 1ULL << power;
if (shifted <= ns) {
power++;
}
if (debugging) {
printf("shifted %lld\n", (long long)shifted);
printf("seconds_to_pow2ns: seconds: %d, ns %lld, power %d\n",
seconds, (long long)ns, (int)power);
}
return (power);
}
/*
* Handle the few command line arguments supported.
*/
static void
parseargs(int argc, char *argv[])
{
int longindex;
int c;
const char *lopt;
/*
* if we end with a 'd' aka 'watchdogd' then we are the daemon program,
* otherwise run as a command line utility.
*/
c = strlen(argv[0]);
if (argv[0][c - 1] == 'd')
is_daemon = 1;
if (is_daemon)
getopt_shortopts = "I:de:ns:t:ST:w?";
else
getopt_shortopts = "dt:?";
while ((c = getopt_long(argc, argv, getopt_shortopts, longopts,
&longindex)) != -1) {
switch (c) {
case 'I':
pidfile = optarg;
break;
case 'd':
debugging = 1;
break;
case 'e':
test_cmd = strdup(optarg);
break;
case 'n':
is_dry_run = 1;
break;
#ifdef notyet
case 'p':
passive = 1;
break;
#endif
case 's':
nap = fetchtimeout(c, NULL, optarg, 0);
break;
case 'S':
do_syslog = 0;
break;
case 't':
timeout_sec = atoi(optarg);
timeout = parse_timeout_to_pow2ns(c, NULL, optarg);
if (debugging)
printf("Timeout is 2^%d nanoseconds\n",
timeout);
break;
case 'T':
carp_thresh_seconds =
fetchtimeout(c, "NULL", optarg, 0);
break;
case 'w':
do_timedog = 1;
break;
case 0:
lopt = longopts[longindex].name;
if (!strcmp(lopt, "pretimeout")) {
pretimeout = fetchtimeout(0, lopt, optarg, 0);
} else if (!strcmp(lopt, "pretimeout-action")) {
pretimeout_act = timeout_act_str2int(lopt,
optarg);
} else if (!strcmp(lopt, "softtimeout-action")) {
softtimeout_act = timeout_act_str2int(lopt,
optarg);
} else {
/* warnx("bad option at index %d: %s", optind,
argv[optind]);
usage();
*/
}
break;
case '?':
default:
usage();
/* NOTREACHED */
}
}
if (carp_thresh_seconds == -1)
carp_thresh_seconds = nap;
if (argc != optind)
errx(EX_USAGE, "extra arguments.");
if (is_daemon && timeout < WD_TO_1SEC)
errx(EX_USAGE, "-t argument is less than one second.");
if (pretimeout_set) {
struct timespec ts;
pow2ns_to_ts(timeout, &ts);
if (pretimeout >= (uintmax_t)ts.tv_sec) {
errx(EX_USAGE,
"pretimeout (%d) >= timeout (%d -> %ld)\n"
"see manual section TIMEOUT RESOLUTION",
pretimeout, timeout_sec, (long)ts.tv_sec);
}
}
}