1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-26 11:47:31 +00:00
freebsd/sys/dev/ath/if_ath_rx_edma.c
Gleb Smirnoff 76039bc84f The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
to this event, adding if_var.h to files that do need it. Also, include
all includes that now are included due to implicit pollution via if_var.h

Sponsored by:	Netflix
Sponsored by:	Nginx, Inc.
2013-10-26 17:58:36 +00:00

950 lines
22 KiB
C

/*-
* Copyright (c) 2012 Adrian Chadd <adrian@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the Atheros Wireless LAN controller.
*
* This software is derived from work of Atsushi Onoe; his contribution
* is greatly appreciated.
*/
#include "opt_inet.h"
#include "opt_ath.h"
/*
* This is needed for register operations which are performed
* by the driver - eg, calls to ath_hal_gettsf32().
*
* It's also required for any AH_DEBUG checks in here, eg the
* module dependencies.
*/
#include "opt_ah.h"
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysctl.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/errno.h>
#include <sys/callout.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/priv.h>
#include <sys/module.h>
#include <sys/ktr.h>
#include <sys/smp.h> /* for mp_ncpus */
#include <machine/bus.h>
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_llc.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_regdomain.h>
#ifdef IEEE80211_SUPPORT_SUPERG
#include <net80211/ieee80211_superg.h>
#endif
#ifdef IEEE80211_SUPPORT_TDMA
#include <net80211/ieee80211_tdma.h>
#endif
#include <net/bpf.h>
#ifdef INET
#include <netinet/in.h>
#include <netinet/if_ether.h>
#endif
#include <dev/ath/if_athvar.h>
#include <dev/ath/ath_hal/ah_devid.h> /* XXX for softled */
#include <dev/ath/ath_hal/ah_diagcodes.h>
#include <dev/ath/if_ath_debug.h>
#include <dev/ath/if_ath_misc.h>
#include <dev/ath/if_ath_tsf.h>
#include <dev/ath/if_ath_tx.h>
#include <dev/ath/if_ath_sysctl.h>
#include <dev/ath/if_ath_led.h>
#include <dev/ath/if_ath_keycache.h>
#include <dev/ath/if_ath_rx.h>
#include <dev/ath/if_ath_beacon.h>
#include <dev/ath/if_athdfs.h>
#ifdef ATH_TX99_DIAG
#include <dev/ath/ath_tx99/ath_tx99.h>
#endif
#include <dev/ath/if_ath_rx_edma.h>
#ifdef ATH_DEBUG_ALQ
#include <dev/ath/if_ath_alq.h>
#endif
/*
* some general macros
*/
#define INCR(_l, _sz) (_l) ++; (_l) &= ((_sz) - 1)
#define DECR(_l, _sz) (_l) --; (_l) &= ((_sz) - 1)
MALLOC_DECLARE(M_ATHDEV);
/*
* XXX TODO:
*
* + Make sure the FIFO is correctly flushed and reinitialised
* through a reset;
* + Verify multi-descriptor frames work!
* + There's a "memory use after free" which needs to be tracked down
* and fixed ASAP. I've seen this in the legacy path too, so it
* may be a generic RX path issue.
*/
/*
* XXX shuffle the function orders so these pre-declarations aren't
* required!
*/
static int ath_edma_rxfifo_alloc(struct ath_softc *sc, HAL_RX_QUEUE qtype,
int nbufs);
static int ath_edma_rxfifo_flush(struct ath_softc *sc, HAL_RX_QUEUE qtype);
static void ath_edma_rxbuf_free(struct ath_softc *sc, struct ath_buf *bf);
static void ath_edma_recv_proc_queue(struct ath_softc *sc,
HAL_RX_QUEUE qtype, int dosched);
static int ath_edma_recv_proc_deferred_queue(struct ath_softc *sc,
HAL_RX_QUEUE qtype, int dosched);
static void
ath_edma_stoprecv(struct ath_softc *sc, int dodelay)
{
struct ath_hal *ah = sc->sc_ah;
ATH_RX_LOCK(sc);
ath_hal_stoppcurecv(ah);
ath_hal_setrxfilter(ah, 0);
ath_hal_stopdmarecv(ah);
DELAY(3000);
/* Flush RX pending for each queue */
/* XXX should generic-ify this */
if (sc->sc_rxedma[HAL_RX_QUEUE_HP].m_rxpending) {
m_freem(sc->sc_rxedma[HAL_RX_QUEUE_HP].m_rxpending);
sc->sc_rxedma[HAL_RX_QUEUE_HP].m_rxpending = NULL;
}
if (sc->sc_rxedma[HAL_RX_QUEUE_LP].m_rxpending) {
m_freem(sc->sc_rxedma[HAL_RX_QUEUE_LP].m_rxpending);
sc->sc_rxedma[HAL_RX_QUEUE_LP].m_rxpending = NULL;
}
ATH_RX_UNLOCK(sc);
}
/*
* Re-initialise the FIFO given the current buffer contents.
* Specifically, walk from head -> tail, pushing the FIFO contents
* back into the FIFO.
*/
static void
ath_edma_reinit_fifo(struct ath_softc *sc, HAL_RX_QUEUE qtype)
{
struct ath_rx_edma *re = &sc->sc_rxedma[qtype];
struct ath_buf *bf;
int i, j;
ATH_RX_LOCK_ASSERT(sc);
i = re->m_fifo_head;
for (j = 0; j < re->m_fifo_depth; j++) {
bf = re->m_fifo[i];
DPRINTF(sc, ATH_DEBUG_EDMA_RX,
"%s: Q%d: pos=%i, addr=0x%jx\n",
__func__,
qtype,
i,
(uintmax_t)bf->bf_daddr);
ath_hal_putrxbuf(sc->sc_ah, bf->bf_daddr, qtype);
INCR(i, re->m_fifolen);
}
/* Ensure this worked out right */
if (i != re->m_fifo_tail) {
device_printf(sc->sc_dev, "%s: i (%d) != tail! (%d)\n",
__func__,
i,
re->m_fifo_tail);
}
}
/*
* Start receive.
*
* XXX TODO: this needs to reallocate the FIFO entries when a reset
* occurs, in case the FIFO is filled up and no new descriptors get
* thrown into the FIFO.
*/
static int
ath_edma_startrecv(struct ath_softc *sc)
{
struct ath_hal *ah = sc->sc_ah;
ATH_RX_LOCK(sc);
/* Enable RX FIFO */
ath_hal_rxena(ah);
/*
* Entries should only be written out if the
* FIFO is empty.
*
* XXX This isn't correct. I should be looking
* at the value of AR_RXDP_SIZE (0x0070) to determine
* how many entries are in here.
*
* A warm reset will clear the registers but not the FIFO.
*
* And I believe this is actually the address of the last
* handled buffer rather than the current FIFO pointer.
* So if no frames have been (yet) seen, we'll reinit the
* FIFO.
*
* I'll chase that up at some point.
*/
if (ath_hal_getrxbuf(sc->sc_ah, HAL_RX_QUEUE_HP) == 0) {
DPRINTF(sc, ATH_DEBUG_EDMA_RX,
"%s: Re-initing HP FIFO\n", __func__);
ath_edma_reinit_fifo(sc, HAL_RX_QUEUE_HP);
}
if (ath_hal_getrxbuf(sc->sc_ah, HAL_RX_QUEUE_LP) == 0) {
DPRINTF(sc, ATH_DEBUG_EDMA_RX,
"%s: Re-initing LP FIFO\n", __func__);
ath_edma_reinit_fifo(sc, HAL_RX_QUEUE_LP);
}
/* Add up to m_fifolen entries in each queue */
/*
* These must occur after the above write so the FIFO buffers
* are pushed/tracked in the same order as the hardware will
* process them.
*/
ath_edma_rxfifo_alloc(sc, HAL_RX_QUEUE_HP,
sc->sc_rxedma[HAL_RX_QUEUE_HP].m_fifolen);
ath_edma_rxfifo_alloc(sc, HAL_RX_QUEUE_LP,
sc->sc_rxedma[HAL_RX_QUEUE_LP].m_fifolen);
ath_mode_init(sc);
ath_hal_startpcurecv(ah);
ATH_RX_UNLOCK(sc);
return (0);
}
static void
ath_edma_recv_sched_queue(struct ath_softc *sc, HAL_RX_QUEUE qtype,
int dosched)
{
ath_edma_recv_proc_queue(sc, qtype, dosched);
taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask);
}
static void
ath_edma_recv_sched(struct ath_softc *sc, int dosched)
{
ath_edma_recv_proc_queue(sc, HAL_RX_QUEUE_HP, dosched);
ath_edma_recv_proc_queue(sc, HAL_RX_QUEUE_LP, dosched);
taskqueue_enqueue(sc->sc_tq, &sc->sc_rxtask);
}
static void
ath_edma_recv_flush(struct ath_softc *sc)
{
DPRINTF(sc, ATH_DEBUG_RECV, "%s: called\n", __func__);
ATH_PCU_LOCK(sc);
sc->sc_rxproc_cnt++;
ATH_PCU_UNLOCK(sc);
/*
* Flush any active frames from FIFO -> deferred list
*/
ath_edma_recv_proc_queue(sc, HAL_RX_QUEUE_HP, 0);
ath_edma_recv_proc_queue(sc, HAL_RX_QUEUE_LP, 0);
/*
* Process what's in the deferred queue
*/
ath_edma_recv_proc_deferred_queue(sc, HAL_RX_QUEUE_HP, 0);
ath_edma_recv_proc_deferred_queue(sc, HAL_RX_QUEUE_LP, 0);
ATH_PCU_LOCK(sc);
sc->sc_rxproc_cnt--;
ATH_PCU_UNLOCK(sc);
}
/*
* Process frames from the current queue into the deferred queue.
*/
static void
ath_edma_recv_proc_queue(struct ath_softc *sc, HAL_RX_QUEUE qtype,
int dosched)
{
struct ath_rx_edma *re = &sc->sc_rxedma[qtype];
struct ath_rx_status *rs;
struct ath_desc *ds;
struct ath_buf *bf;
struct mbuf *m;
struct ath_hal *ah = sc->sc_ah;
uint64_t tsf;
uint16_t nf;
int npkts = 0;
tsf = ath_hal_gettsf64(ah);
nf = ath_hal_getchannoise(ah, sc->sc_curchan);
sc->sc_stats.ast_rx_noise = nf;
ATH_RX_LOCK(sc);
do {
bf = re->m_fifo[re->m_fifo_head];
/* This shouldn't occur! */
if (bf == NULL) {
device_printf(sc->sc_dev, "%s: Q%d: NULL bf?\n",
__func__,
qtype);
break;
}
m = bf->bf_m;
ds = bf->bf_desc;
/*
* Sync descriptor memory - this also syncs the buffer for us.
* EDMA descriptors are in cached memory.
*/
bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
rs = &bf->bf_status.ds_rxstat;
bf->bf_rxstatus = ath_hal_rxprocdesc(ah, ds, bf->bf_daddr,
NULL, rs);
#ifdef ATH_DEBUG
if (sc->sc_debug & ATH_DEBUG_RECV_DESC)
ath_printrxbuf(sc, bf, 0, bf->bf_rxstatus == HAL_OK);
#endif /* ATH_DEBUG */
#ifdef ATH_DEBUG_ALQ
if (if_ath_alq_checkdebug(&sc->sc_alq, ATH_ALQ_EDMA_RXSTATUS))
if_ath_alq_post(&sc->sc_alq, ATH_ALQ_EDMA_RXSTATUS,
sc->sc_rx_statuslen, (char *) ds);
#endif /* ATH_DEBUG */
if (bf->bf_rxstatus == HAL_EINPROGRESS)
break;
/*
* Completed descriptor.
*/
DPRINTF(sc, ATH_DEBUG_EDMA_RX,
"%s: Q%d: completed!\n", __func__, qtype);
npkts++;
/*
* We've been synced already, so unmap.
*/
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
/*
* Remove the FIFO entry and place it on the completion
* queue.
*/
re->m_fifo[re->m_fifo_head] = NULL;
TAILQ_INSERT_TAIL(&sc->sc_rx_rxlist[qtype], bf, bf_list);
/* Bump the descriptor FIFO stats */
INCR(re->m_fifo_head, re->m_fifolen);
re->m_fifo_depth--;
/* XXX check it doesn't fall below 0 */
} while (re->m_fifo_depth > 0);
/* Append some more fresh frames to the FIFO */
if (dosched)
ath_edma_rxfifo_alloc(sc, qtype, re->m_fifolen);
ATH_RX_UNLOCK(sc);
/* rx signal state monitoring */
ath_hal_rxmonitor(ah, &sc->sc_halstats, sc->sc_curchan);
ATH_KTR(sc, ATH_KTR_INTERRUPTS, 1,
"ath edma rx proc: npkts=%d\n",
npkts);
/* Handle resched and kickpcu appropriately */
ATH_PCU_LOCK(sc);
if (dosched && sc->sc_kickpcu) {
ATH_KTR(sc, ATH_KTR_ERROR, 0,
"ath_edma_recv_proc_queue(): kickpcu");
if (npkts > 0)
device_printf(sc->sc_dev,
"%s: handled npkts %d\n",
__func__, npkts);
/*
* XXX TODO: what should occur here? Just re-poke and
* re-enable the RX FIFO?
*/
sc->sc_kickpcu = 0;
}
ATH_PCU_UNLOCK(sc);
return;
}
/*
* Flush the deferred queue.
*
* This destructively flushes the deferred queue - it doesn't
* call the wireless stack on each mbuf.
*/
static void
ath_edma_flush_deferred_queue(struct ath_softc *sc)
{
struct ath_buf *bf, *next;
ATH_RX_LOCK_ASSERT(sc);
/* Free in one set, inside the lock */
TAILQ_FOREACH_SAFE(bf,
&sc->sc_rx_rxlist[HAL_RX_QUEUE_LP], bf_list, next) {
/* Free the buffer/mbuf */
ath_edma_rxbuf_free(sc, bf);
}
TAILQ_FOREACH_SAFE(bf,
&sc->sc_rx_rxlist[HAL_RX_QUEUE_HP], bf_list, next) {
/* Free the buffer/mbuf */
ath_edma_rxbuf_free(sc, bf);
}
}
static int
ath_edma_recv_proc_deferred_queue(struct ath_softc *sc, HAL_RX_QUEUE qtype,
int dosched)
{
int ngood = 0;
uint64_t tsf;
struct ath_buf *bf, *next;
struct ath_rx_status *rs;
int16_t nf;
ath_bufhead rxlist;
struct mbuf *m;
TAILQ_INIT(&rxlist);
nf = ath_hal_getchannoise(sc->sc_ah, sc->sc_curchan);
/*
* XXX TODO: the NF/TSF should be stamped on the bufs themselves,
* otherwise we may end up adding in the wrong values if this
* is delayed too far..
*/
tsf = ath_hal_gettsf64(sc->sc_ah);
/* Copy the list over */
ATH_RX_LOCK(sc);
TAILQ_CONCAT(&rxlist, &sc->sc_rx_rxlist[qtype], bf_list);
ATH_RX_UNLOCK(sc);
/* Handle the completed descriptors */
TAILQ_FOREACH_SAFE(bf, &rxlist, bf_list, next) {
/*
* Skip the RX descriptor status - start at the data offset
*/
m_adj(bf->bf_m, sc->sc_rx_statuslen);
/* Handle the frame */
rs = &bf->bf_status.ds_rxstat;
m = bf->bf_m;
bf->bf_m = NULL;
if (ath_rx_pkt(sc, rs, bf->bf_rxstatus, tsf, nf, qtype, bf, m))
ngood++;
}
if (ngood) {
sc->sc_lastrx = tsf;
}
ATH_KTR(sc, ATH_KTR_INTERRUPTS, 1,
"ath edma rx deferred proc: ngood=%d\n",
ngood);
/* Free in one set, inside the lock */
ATH_RX_LOCK(sc);
TAILQ_FOREACH_SAFE(bf, &rxlist, bf_list, next) {
/* Free the buffer/mbuf */
ath_edma_rxbuf_free(sc, bf);
}
ATH_RX_UNLOCK(sc);
return (ngood);
}
static void
ath_edma_recv_tasklet(void *arg, int npending)
{
struct ath_softc *sc = (struct ath_softc *) arg;
struct ifnet *ifp = sc->sc_ifp;
#ifdef IEEE80211_SUPPORT_SUPERG
struct ieee80211com *ic = ifp->if_l2com;
#endif
DPRINTF(sc, ATH_DEBUG_EDMA_RX, "%s: called; npending=%d\n",
__func__,
npending);
ATH_PCU_LOCK(sc);
if (sc->sc_inreset_cnt > 0) {
device_printf(sc->sc_dev, "%s: sc_inreset_cnt > 0; skipping\n",
__func__);
ATH_PCU_UNLOCK(sc);
return;
}
sc->sc_rxproc_cnt++;
ATH_PCU_UNLOCK(sc);
ath_edma_recv_proc_queue(sc, HAL_RX_QUEUE_HP, 1);
ath_edma_recv_proc_queue(sc, HAL_RX_QUEUE_LP, 1);
ath_edma_recv_proc_deferred_queue(sc, HAL_RX_QUEUE_HP, 1);
ath_edma_recv_proc_deferred_queue(sc, HAL_RX_QUEUE_LP, 1);
/* XXX inside IF_LOCK ? */
if ((ifp->if_drv_flags & IFF_DRV_OACTIVE) == 0) {
#ifdef IEEE80211_SUPPORT_SUPERG
ieee80211_ff_age_all(ic, 100);
#endif
if (! IFQ_IS_EMPTY(&ifp->if_snd))
ath_tx_kick(sc);
}
if (ath_dfs_tasklet_needed(sc, sc->sc_curchan))
taskqueue_enqueue(sc->sc_tq, &sc->sc_dfstask);
ATH_PCU_LOCK(sc);
sc->sc_rxproc_cnt--;
ATH_PCU_UNLOCK(sc);
}
/*
* Allocate an RX mbuf for the given ath_buf and initialise
* it for EDMA.
*
* + Allocate a 4KB mbuf;
* + Setup the DMA map for the given buffer;
* + Return that.
*/
static int
ath_edma_rxbuf_init(struct ath_softc *sc, struct ath_buf *bf)
{
struct mbuf *m;
int error;
int len;
ATH_RX_LOCK_ASSERT(sc);
m = m_getm(NULL, sc->sc_edma_bufsize, M_NOWAIT, MT_DATA);
if (! m)
return (ENOBUFS); /* XXX ?*/
/* XXX warn/enforce alignment */
len = m->m_ext.ext_size;
#if 0
device_printf(sc->sc_dev, "%s: called: m=%p, size=%d, mtod=%p\n",
__func__,
m,
len,
mtod(m, char *));
#endif
m->m_pkthdr.len = m->m_len = m->m_ext.ext_size;
/*
* Populate ath_buf fields.
*/
bf->bf_desc = mtod(m, struct ath_desc *);
bf->bf_lastds = bf->bf_desc; /* XXX only really for TX? */
bf->bf_m = m;
/*
* Zero the descriptor and ensure it makes it out to the
* bounce buffer if one is required.
*
* XXX PREWRITE will copy the whole buffer; we only needed it
* to sync the first 32 DWORDS. Oh well.
*/
memset(bf->bf_desc, '\0', sc->sc_rx_statuslen);
/*
* Create DMA mapping.
*/
error = bus_dmamap_load_mbuf_sg(sc->sc_dmat,
bf->bf_dmamap, m, bf->bf_segs, &bf->bf_nseg, BUS_DMA_NOWAIT);
if (error != 0) {
device_printf(sc->sc_dev, "%s: failed; error=%d\n",
__func__,
error);
m_freem(m);
return (error);
}
/*
* Set daddr to the physical mapping page.
*/
bf->bf_daddr = bf->bf_segs[0].ds_addr;
/*
* Prepare for the upcoming read.
*
* We need to both sync some data into the buffer (the zero'ed
* descriptor payload) and also prepare for the read that's going
* to occur.
*/
bus_dmamap_sync(sc->sc_dmat, bf->bf_dmamap,
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
/* Finish! */
return (0);
}
/*
* Allocate a RX buffer.
*/
static struct ath_buf *
ath_edma_rxbuf_alloc(struct ath_softc *sc)
{
struct ath_buf *bf;
int error;
ATH_RX_LOCK_ASSERT(sc);
/* Allocate buffer */
bf = TAILQ_FIRST(&sc->sc_rxbuf);
/* XXX shouldn't happen upon startup? */
if (bf == NULL) {
device_printf(sc->sc_dev, "%s: nothing on rxbuf?!\n",
__func__);
return (NULL);
}
/* Remove it from the free list */
TAILQ_REMOVE(&sc->sc_rxbuf, bf, bf_list);
/* Assign RX mbuf to it */
error = ath_edma_rxbuf_init(sc, bf);
if (error != 0) {
device_printf(sc->sc_dev,
"%s: bf=%p, rxbuf alloc failed! error=%d\n",
__func__,
bf,
error);
TAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list);
return (NULL);
}
return (bf);
}
static void
ath_edma_rxbuf_free(struct ath_softc *sc, struct ath_buf *bf)
{
ATH_RX_LOCK_ASSERT(sc);
/*
* Only unload the frame if we haven't consumed
* the mbuf via ath_rx_pkt().
*/
if (bf->bf_m) {
bus_dmamap_unload(sc->sc_dmat, bf->bf_dmamap);
m_freem(bf->bf_m);
bf->bf_m = NULL;
}
/* XXX lock? */
TAILQ_INSERT_TAIL(&sc->sc_rxbuf, bf, bf_list);
}
/*
* Allocate up to 'n' entries and push them onto the hardware FIFO.
*
* Return how many entries were successfully pushed onto the
* FIFO.
*/
static int
ath_edma_rxfifo_alloc(struct ath_softc *sc, HAL_RX_QUEUE qtype, int nbufs)
{
struct ath_rx_edma *re = &sc->sc_rxedma[qtype];
struct ath_buf *bf;
int i;
ATH_RX_LOCK_ASSERT(sc);
/*
* Allocate buffers until the FIFO is full or nbufs is reached.
*/
for (i = 0; i < nbufs && re->m_fifo_depth < re->m_fifolen; i++) {
/* Ensure the FIFO is already blank, complain loudly! */
if (re->m_fifo[re->m_fifo_tail] != NULL) {
device_printf(sc->sc_dev,
"%s: Q%d: fifo[%d] != NULL (%p)\n",
__func__,
qtype,
re->m_fifo_tail,
re->m_fifo[re->m_fifo_tail]);
/* Free the slot */
ath_edma_rxbuf_free(sc, re->m_fifo[re->m_fifo_tail]);
re->m_fifo_depth--;
/* XXX check it's not < 0 */
re->m_fifo[re->m_fifo_tail] = NULL;
}
bf = ath_edma_rxbuf_alloc(sc);
/* XXX should ensure the FIFO is not NULL? */
if (bf == NULL) {
device_printf(sc->sc_dev,
"%s: Q%d: alloc failed: i=%d, nbufs=%d?\n",
__func__,
qtype,
i,
nbufs);
break;
}
re->m_fifo[re->m_fifo_tail] = bf;
/* Write to the RX FIFO */
DPRINTF(sc, ATH_DEBUG_EDMA_RX,
"%s: Q%d: putrxbuf=%p (0x%jx)\n",
__func__,
qtype,
bf->bf_desc,
(uintmax_t) bf->bf_daddr);
ath_hal_putrxbuf(sc->sc_ah, bf->bf_daddr, qtype);
re->m_fifo_depth++;
INCR(re->m_fifo_tail, re->m_fifolen);
}
/*
* Return how many were allocated.
*/
DPRINTF(sc, ATH_DEBUG_EDMA_RX, "%s: Q%d: nbufs=%d, nalloced=%d\n",
__func__,
qtype,
nbufs,
i);
return (i);
}
static int
ath_edma_rxfifo_flush(struct ath_softc *sc, HAL_RX_QUEUE qtype)
{
struct ath_rx_edma *re = &sc->sc_rxedma[qtype];
int i;
ATH_RX_LOCK_ASSERT(sc);
for (i = 0; i < re->m_fifolen; i++) {
if (re->m_fifo[i] != NULL) {
#ifdef ATH_DEBUG
struct ath_buf *bf = re->m_fifo[i];
if (sc->sc_debug & ATH_DEBUG_RECV_DESC)
ath_printrxbuf(sc, bf, 0, HAL_OK);
#endif
ath_edma_rxbuf_free(sc, re->m_fifo[i]);
re->m_fifo[i] = NULL;
re->m_fifo_depth--;
}
}
if (re->m_rxpending != NULL) {
m_freem(re->m_rxpending);
re->m_rxpending = NULL;
}
re->m_fifo_head = re->m_fifo_tail = re->m_fifo_depth = 0;
return (0);
}
/*
* Setup the initial RX FIFO structure.
*/
static int
ath_edma_setup_rxfifo(struct ath_softc *sc, HAL_RX_QUEUE qtype)
{
struct ath_rx_edma *re = &sc->sc_rxedma[qtype];
ATH_RX_LOCK_ASSERT(sc);
if (! ath_hal_getrxfifodepth(sc->sc_ah, qtype, &re->m_fifolen)) {
device_printf(sc->sc_dev, "%s: qtype=%d, failed\n",
__func__,
qtype);
return (-EINVAL);
}
device_printf(sc->sc_dev, "%s: type=%d, FIFO depth = %d entries\n",
__func__,
qtype,
re->m_fifolen);
/* Allocate ath_buf FIFO array, pre-zero'ed */
re->m_fifo = malloc(sizeof(struct ath_buf *) * re->m_fifolen,
M_ATHDEV,
M_NOWAIT | M_ZERO);
if (re->m_fifo == NULL) {
device_printf(sc->sc_dev, "%s: malloc failed\n",
__func__);
return (-ENOMEM);
}
/*
* Set initial "empty" state.
*/
re->m_rxpending = NULL;
re->m_fifo_head = re->m_fifo_tail = re->m_fifo_depth = 0;
return (0);
}
static int
ath_edma_rxfifo_free(struct ath_softc *sc, HAL_RX_QUEUE qtype)
{
struct ath_rx_edma *re = &sc->sc_rxedma[qtype];
device_printf(sc->sc_dev, "%s: called; qtype=%d\n",
__func__,
qtype);
free(re->m_fifo, M_ATHDEV);
return (0);
}
static int
ath_edma_dma_rxsetup(struct ath_softc *sc)
{
int error;
/*
* Create RX DMA tag and buffers.
*/
error = ath_descdma_setup_rx_edma(sc, &sc->sc_rxdma, &sc->sc_rxbuf,
"rx", ath_rxbuf, sc->sc_rx_statuslen);
if (error != 0)
return error;
ATH_RX_LOCK(sc);
(void) ath_edma_setup_rxfifo(sc, HAL_RX_QUEUE_HP);
(void) ath_edma_setup_rxfifo(sc, HAL_RX_QUEUE_LP);
ATH_RX_UNLOCK(sc);
return (0);
}
static int
ath_edma_dma_rxteardown(struct ath_softc *sc)
{
ATH_RX_LOCK(sc);
ath_edma_flush_deferred_queue(sc);
ath_edma_rxfifo_flush(sc, HAL_RX_QUEUE_HP);
ath_edma_rxfifo_free(sc, HAL_RX_QUEUE_HP);
ath_edma_rxfifo_flush(sc, HAL_RX_QUEUE_LP);
ath_edma_rxfifo_free(sc, HAL_RX_QUEUE_LP);
ATH_RX_UNLOCK(sc);
/* Free RX ath_buf */
/* Free RX DMA tag */
if (sc->sc_rxdma.dd_desc_len != 0)
ath_descdma_cleanup(sc, &sc->sc_rxdma, &sc->sc_rxbuf);
return (0);
}
void
ath_recv_setup_edma(struct ath_softc *sc)
{
/* Set buffer size to 4k */
sc->sc_edma_bufsize = 4096;
/* Fetch EDMA field and buffer sizes */
(void) ath_hal_getrxstatuslen(sc->sc_ah, &sc->sc_rx_statuslen);
/* Configure the hardware with the RX buffer size */
(void) ath_hal_setrxbufsize(sc->sc_ah, sc->sc_edma_bufsize -
sc->sc_rx_statuslen);
device_printf(sc->sc_dev, "RX status length: %d\n",
sc->sc_rx_statuslen);
device_printf(sc->sc_dev, "RX buffer size: %d\n",
sc->sc_edma_bufsize);
sc->sc_rx.recv_stop = ath_edma_stoprecv;
sc->sc_rx.recv_start = ath_edma_startrecv;
sc->sc_rx.recv_flush = ath_edma_recv_flush;
sc->sc_rx.recv_tasklet = ath_edma_recv_tasklet;
sc->sc_rx.recv_rxbuf_init = ath_edma_rxbuf_init;
sc->sc_rx.recv_setup = ath_edma_dma_rxsetup;
sc->sc_rx.recv_teardown = ath_edma_dma_rxteardown;
sc->sc_rx.recv_sched = ath_edma_recv_sched;
sc->sc_rx.recv_sched_queue = ath_edma_recv_sched_queue;
}