mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-24 11:29:10 +00:00
Mirror of the FreeBSD src repository https://git.FreeBSD.org/src.git .
eb6f0de09d
for Atheros AR5416 and later wireless devices. This is a very large commit - the complete history can be found in the user/adrian/if_ath_tx branch. Legacy (ie, pre-AR5416) devices also use the per-software TXQ support and (in theory) can support non-aggregation ADDBA sessions. However, the net80211 stack doesn't currently support this. In summary: TX path: * queued frames normally go onto a per-TID, per-node queue * some special frames (eg ADDBA control frames) are thrown directly onto the relevant hardware queue so they can go out before any software queued frames are queued. * Add methods to create, suspend, resume and tear down an aggregation session. * Add in software retransmission of both normal and aggregate frames. * Add in completion handling of aggregate frames, including parsing the block ack bitmap provided by the hardware. * Write an aggregation function which can assemble frames into an aggregate based on the selected rate control and channel configuration. * The per-TID queues are locked based on their target hardware TX queue. This matches what ath9k/atheros does, and thus simplified porting over some of the aggregation logic. * When doing TX aggregation, stick the sequence number allocation in the TX path rather than net80211 TX path, and protect it by the TXQ lock. Rate control: * Delay rate control selection until the frame is about to be queued to the hardware, so retried frames can have their rate control choices changed. Frames with a static rate control selection have that applied before each TX, just to simplify the TX path (ie, not have "static" and "dynamic" rate control special cased.) * Teach ath_rate_sample about aggregates - both completion and errors. * Add an EWMA for tracking what the current "good" MCS rate is based on failure rates. Misc: * Introduce a bunch of dirty hacks and workarounds so TID mapping and net80211 frame inspection can be kept out of the net80211 layer. Because of the way this code works (and it's from Atheros and Linux ath9k), there is a consistent, 1:1 mapping between TID and AC. So we need to ensure that frames going to a specific TID will _always_ end up on the right AC, and vice versa, or the completion/locking will simply get very confused. I plan on addressing this mess in the future. Known issues: * There is no BAR frame transmission just yet. A whole lot of tidying up needs to occur before BAR frame TX can occur in the "correct" place - ie, once the TID TX queue has been drained. * Interface reset/purge/etc results in frames in the TX and RX queues being removed. This creates holes in the sequence numbers being assigned and the TX/RX AMPDU code (on either side) just hangs. * There's no filtered frame support at the present moment, so stations going into power saving mode will simply have a number of frames dropped - likely resulting in a traffic "hang". * Raw frame TX is going to just not function with 11n aggregation. Likely this needs to be modified to always override the sequence number if the frame is going into an aggregation session. However, general raw frame injection currently doesn't work in general in net80211, so let's just ignore this for now until this is sorted out. * HT protection is just not implemented and won't be until the above is sorted out. In addition, the AR5416 has issues RTS protecting large aggregates (anything >8k), so the work around needs to be ported and tested. Thus, this will be put on hold until the above work is complete. * The rate control module 'sample' is the only currently supported module; onoe/amrr haven't been tested and have likely bit rotted a little. I'll follow up with some commits to make them work again for non-11n rates, but they won't be updated to handle 11n and aggregation. If someone wishes to do so then they're welcome to send along patches. * .. and "sample" doesn't really do a good job of 11n TX. Specifically, the metrics used (packet TX time and failure/success rates) isn't as useful for 11n. It's likely that it should be extended to take into account the aggregate throughput possible and then choose a rate which maximises that. Ie, it may be acceptable for a higher MCS rate with a higher failure to be used if it gives a more acceptable throughput/latency then a lower MCS rate @ a lower error rate. Again, patches will be gratefully accepted. Because of this, ATH_ENABLE_11N is still not enabled by default. Sponsored by: Hobnob, Inc. Obtained from: Linux, Atheros |
||
|---|---|---|
| bin | ||
| cddl | ||
| contrib | ||
| crypto | ||
| etc | ||
| games | ||
| gnu | ||
| include | ||
| kerberos5 | ||
| lib | ||
| libexec | ||
| release | ||
| rescue | ||
| sbin | ||
| secure | ||
| share | ||
| sys | ||
| tools | ||
| usr.bin | ||
| usr.sbin | ||
| COPYRIGHT | ||
| LOCKS | ||
| MAINTAINERS | ||
| Makefile | ||
| Makefile.inc1 | ||
| Makefile.mips | ||
| ObsoleteFiles.inc | ||
| README | ||
| UPDATING | ||
This is the top level of the FreeBSD source directory. This file was last revised on: $FreeBSD$ For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information). The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree, the most commonly used one being ``world'', which rebuilds and installs everything in the FreeBSD system from the source tree except the kernel, the kernel-modules and the contents of /etc. The ``world'' target should only be used in cases where the source tree has not changed from the currently running version. See: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html for more information, including setting make(1) variables. The ``buildkernel'' and ``installkernel'' targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags. Building a kernel is a somewhat more involved process, documentation for which can be found at: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html And in the config(8) man page. Note: If you want to build and install the kernel with the ``buildkernel'' and ``installkernel'' targets, you might need to build world before. More information is available in the handbook. The sample kernel configuration files reside in the sys/<arch>/conf sub-directory (assuming that you've installed the kernel sources), the file named GENERIC being the one used to build your initial installation kernel. The file NOTES contains entries and documentation for all possible devices, not just those commonly used. It is the successor of the ancient LINT file, but in contrast to LINT, it is not buildable as a kernel but a pure reference and documentation file. Source Roadmap: --------------- bin System/user commands. cddl Various commands and libraries under the Common Development and Distribution License. contrib Packages contributed by 3rd parties. crypto Cryptography stuff (see crypto/README). etc Template files for /etc. games Amusements. gnu Various commands and libraries under the GNU Public License. Please see gnu/COPYING* for more information. include System include files. kerberos5 Kerberos5 (Heimdal) package. lib System libraries. libexec System daemons. release Release building Makefile & associated tools. rescue Build system for statically linked /rescue utilities. sbin System commands. secure Cryptographic libraries and commands. share Shared resources. sys Kernel sources. tools Utilities for regression testing and miscellaneous tasks. usr.bin User commands. usr.sbin System administration commands. For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see: http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html