1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
freebsd/bin/chflags/chflags.1
Kenneth D. Merry 7da1a731c6 Expand the use of stat(2) flags to allow storing some Windows/DOS
and CIFS file attributes as BSD stat(2) flags.

This work is intended to be compatible with ZFS, the Solaris CIFS
server's interaction with ZFS, somewhat compatible with MacOS X,
and of course compatible with Windows.

The Windows attributes that are implemented were chosen based on
the attributes that ZFS already supports.

The summary of the flags is as follows:

UF_SYSTEM:	Command line name: "system" or "usystem"
		ZFS name: XAT_SYSTEM, ZFS_SYSTEM
		Windows: FILE_ATTRIBUTE_SYSTEM

		This flag means that the file is used by the
		operating system.  FreeBSD does not enforce any
		special handling when this flag is set.

UF_SPARSE:	Command line name: "sparse" or "usparse"
		ZFS name: XAT_SPARSE, ZFS_SPARSE
		Windows: FILE_ATTRIBUTE_SPARSE_FILE

		This flag means that the file is sparse.  Although
		ZFS may modify this in some situations, there is
		not generally any special handling for this flag.

UF_OFFLINE:	Command line name: "offline" or "uoffline"
		ZFS name: XAT_OFFLINE, ZFS_OFFLINE
		Windows: FILE_ATTRIBUTE_OFFLINE

		This flag means that the file has been moved to
		offline storage.  FreeBSD does not have any special
		handling for this flag.

UF_REPARSE:	Command line name: "reparse" or "ureparse"
		ZFS name: XAT_REPARSE, ZFS_REPARSE
		Windows: FILE_ATTRIBUTE_REPARSE_POINT

		This flag means that the file is a Windows reparse
		point.  ZFS has special handling code for reparse
		points, but we don't currently have the other
		supporting infrastructure for them.

UF_HIDDEN:	Command line name: "hidden" or "uhidden"
		ZFS name: XAT_HIDDEN, ZFS_HIDDEN
		Windows: FILE_ATTRIBUTE_HIDDEN

		This flag means that the file may be excluded from
		a directory listing if the application honors it.
		FreeBSD has no special handling for this flag.

		The name and bit definition for UF_HIDDEN are
		identical to the definition in MacOS X.

UF_READONLY:	Command line name: "urdonly", "rdonly", "readonly"
		ZFS name: XAT_READONLY, ZFS_READONLY
		Windows: FILE_ATTRIBUTE_READONLY

		This flag means that the file may not written or
		appended, but its attributes may be changed.

		ZFS currently enforces this flag, but Illumos
		developers have discussed disabling enforcement.

		The behavior of this flag is different than MacOS X.
		MacOS X uses UF_IMMUTABLE to represent the DOS
		readonly permission, but that flag has a stronger
		meaning than the semantics of DOS readonly permissions.

UF_ARCHIVE:	Command line name: "uarch", "uarchive"
		ZFS_NAME: XAT_ARCHIVE, ZFS_ARCHIVE
		Windows name: FILE_ATTRIBUTE_ARCHIVE

		The UF_ARCHIVED flag means that the file has changed and
		needs to be archived.  The meaning is same as
		the Windows FILE_ATTRIBUTE_ARCHIVE attribute, and
		the ZFS XAT_ARCHIVE and ZFS_ARCHIVE attribute.

		msdosfs and ZFS have special handling for this flag.
		i.e. they will set it when the file changes.

sys/param.h:		Bump __FreeBSD_version to 1000047 for the
			addition of new stat(2) flags.

chflags.1:		Document the new command line flag names
			(e.g. "system", "hidden") available to the
			user.

ls.1:			Reference chflags(1) for a list of file flags
			and their meanings.

strtofflags.c:		Implement the mapping between the new
			command line flag names and new stat(2)
			flags.

chflags.2:		Document all of the new stat(2) flags, and
			explain the intended behavior in a little
			more detail.  Explain how they map to
			Windows file attributes.

			Different filesystems behave differently
			with respect to flags, so warn the
			application developer to take care when
			using them.

zfs_vnops.c:		Add support for getting and setting the
			UF_ARCHIVE, UF_READONLY, UF_SYSTEM, UF_HIDDEN,
			UF_REPARSE, UF_OFFLINE, and UF_SPARSE flags.

			All of these flags are implemented using
			attributes that ZFS already supports, so
			the on-disk format has not changed.

			ZFS currently doesn't allow setting the
			UF_REPARSE flag, and we don't really have
			the other infrastructure to support reparse
			points.

msdosfs_denode.c,
msdosfs_vnops.c:	Add support for getting and setting
			UF_HIDDEN, UF_SYSTEM and UF_READONLY
			in MSDOSFS.

			It supported SF_ARCHIVED, but this has been
			changed to be UF_ARCHIVE, which has the same
			semantics as the DOS archive attribute instead
			of inverse semantics like SF_ARCHIVED.

			After discussion with Bruce Evans, change
			several things in the msdosfs behavior:

			Use UF_READONLY to indicate whether a file
			is writeable instead of file permissions, but
			don't actually enforce it.

			Refuse to change attributes on the root
			directory, because it is special in FAT
			filesystems, but allow most other attribute
			changes on directories.

			Don't set the archive attribute on a directory
			when its modification time is updated.
			Windows and DOS don't set the archive attribute
			in that scenario, so we are now bug-for-bug
			compatible.

smbfs_node.c,
smbfs_vnops.c:		Add support for UF_HIDDEN, UF_SYSTEM,
			UF_READONLY and UF_ARCHIVE in SMBFS.

			This is similar to changes that Apple has
			made in their version of SMBFS (as of
			smb-583.8, posted on opensource.apple.com),
			but not quite the same.

			We map SMB_FA_READONLY to UF_READONLY,
			because UF_READONLY is intended to match
			the semantics of the DOS readonly flag.
			The MacOS X code maps both UF_IMMUTABLE
			and SF_IMMUTABLE to SMB_FA_READONLY, but
			the immutable flags have stronger meaning
			than the DOS readonly bit.

stat.h:			Add definitions for UF_SYSTEM, UF_SPARSE,
			UF_OFFLINE, UF_REPARSE, UF_ARCHIVE, UF_READONLY
			and UF_HIDDEN.

			The definition of UF_HIDDEN is the same as
			the MacOS X definition.

			Add commented-out definitions of
			UF_COMPRESSED and UF_TRACKED.  They are
			defined in MacOS X (as of 10.8.2), but we
			do not implement them (yet).

ufs_vnops.c:		Add support for getting and setting
			UF_ARCHIVE, UF_HIDDEN, UF_OFFLINE, UF_READONLY,
			UF_REPARSE, UF_SPARSE, and UF_SYSTEM in UFS.
			Alphabetize the flags that are supported.

			These new flags are only stored, UFS does
			not take any action if the flag is set.

Sponsored by:	Spectra Logic
Reviewed by:	bde (earlier version)
2013-08-21 23:04:48 +00:00

244 lines
6.3 KiB
Groff

.\"-
.\" Copyright (c) 1989, 1990, 1993, 1994
.\" The Regents of the University of California. All rights reserved.
.\"
.\" This code is derived from software contributed to Berkeley by
.\" the Institute of Electrical and Electronics Engineers, Inc.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 4. Neither the name of the University nor the names of its contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" @(#)chflags.1 8.4 (Berkeley) 5/2/95
.\" $FreeBSD$
.\"
.Dd April 8, 2013
.Dt CHFLAGS 1
.Os
.Sh NAME
.Nm chflags
.Nd change file flags
.Sh SYNOPSIS
.Nm
.Op Fl fhv
.Oo
.Fl R
.Op Fl H | Fl L | Fl P
.Oc
.Ar flags
.Ar
.Sh DESCRIPTION
The
.Nm
utility modifies the file flags of the listed files
as specified by the
.Ar flags
operand.
.Pp
The options are as follows:
.Bl -tag -width indent
.It Fl f
Do not display a diagnostic message if
.Nm
could not modify the flags for
.Va file ,
nor modify the exit status to reflect such failures.
.It Fl H
If the
.Fl R
option is specified, symbolic links on the command line are followed.
(Symbolic links encountered in the tree traversal are not followed.)
.It Fl h
If the
.Ar file
is a symbolic link,
change the file flags of the link itself rather than the file to which it points.
.It Fl L
If the
.Fl R
option is specified, all symbolic links are followed.
.It Fl P
If the
.Fl R
option is specified, no symbolic links are followed.
This is the default.
.It Fl R
Change the file flags for the file hierarchies rooted
in the files instead of just the files themselves.
.It Fl v
Cause
.Nm
to be verbose, showing filenames as the flags are modified.
If the
.Fl v
option is specified more than once, the old and new flags of the file
will also be printed, in octal notation.
.El
.Pp
The flags are specified as an octal number or a comma separated list
of keywords.
The following keywords are currently defined:
.Bl -tag -offset indent -width ".Cm opaque"
.It Cm arch , archived
set the archived flag (super-user only)
.It Cm nodump
set the nodump flag (owner or super-user only)
.It Cm opaque
set the opaque flag (owner or super-user only)
.It Cm sappnd , sappend
set the system append-only flag (super-user only)
.It Cm schg , schange , simmutable
set the system immutable flag (super-user only)
.It Cm snapshot
set the snapshot flag (filesystems do not allow changing this flag)
.It Cm sunlnk , sunlink
set the system undeletable flag (super-user only)
.It Cm uappnd , uappend
set the user append-only flag (owner or super-user only)
.It Cm uarch , uarchive
set the archive flag (owner or super-user only)
.It Cm uchg , uchange , uimmutable
set the user immutable flag (owner or super-user only)
.It Cm uhidden , hidden
set the hidden file attribute (owner or super-user only)
.It Cm uoffline , offline
set the offline file attribute (owner or super-user only)
.It Cm urdonly , rdonly , readonly
set the DOS, Windows and CIFS readonly flag (owner or super-user only)
.It Cm usparse , sparse
set the sparse file attribute (owner or super-user only)
.It Cm usystem , system
set the DOS, Windows and CIFS system flag (owner or super-user only)
.It Cm ureparse , reparse
set the Windows reparse point file attribute (owner or super-user only)
.It Cm uunlnk , uunlink
set the user undeletable flag (owner or super-user only)
.El
.Pp
Putting the letters
.Dq Ar no
before or removing the letters
.Dq Ar no
from a keyword causes the flag to be cleared.
For example:
.Pp
.Bl -tag -offset indent -width "nouchg" -compact
.It Cm nouchg
clear the user immutable flag (owner or super-user only)
.It Cm dump
clear the nodump flag (owner or super-user only)
.El
.Pp
A few of the octal values include:
.Bl -tag -offset indent -width ".Li 10"
.It Li 0
Clear all file flags.
.It Li 1
Translates to the
.Cm nodump
keyword.
.It Li 2
Translates to the
.Cm uchg
keyword.
.It Li 3
Translates to the
.Cm uchg , nodump
keywords.
.It Li 4
Translates to the
.Cm uappnd
keyword.
.It Li 10
Translates to the
.Cm opaque
keyword.
.It Li 20
translates to the
.Cm uunlnk
keyword.
.El
.Pp
Other combinations of keywords may be placed by using
the octets assigned; however, these are the most notable.
.Pp
Unless the
.Fl H ,
.Fl L ,
or
.Fl h
options are given,
.Nm
on a symbolic link always succeeds and has no effect.
The
.Fl H ,
.Fl L
and
.Fl P
options are ignored unless the
.Fl R
option is specified.
In addition, these options override each other and the
command's actions are determined by the last one specified.
.Pp
You can use "ls -lo" to see the flags of existing files.
.Pp
Note that the ability to change certain flags is dependent
on the current kernel
.Va securelevel
setting.
See
.Xr security 7
for more information on this setting.
.Sh EXIT STATUS
.Ex -std
.Sh SEE ALSO
.Xr ls 1 ,
.Xr chflags 2 ,
.Xr stat 2 ,
.Xr fts 3 ,
.Xr security 7 ,
.Xr symlink 7
.Sh HISTORY
The
.Nm
command first appeared in
.Bx 4.4 .
.Sh BUGS
Only a limited number of utilities are
.Nm
aware.
Some of these tools include
.Xr ls 1 ,
.Xr cp 1 ,
.Xr find 1 ,
.Xr install 1 ,
.Xr dump 8 ,
and
.Xr restore 8 .
In particular a tool which is not currently
.Nm
aware is the
.Xr pax 1
utility.