mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-29 12:03:03 +00:00
c5294719c3
common labels for LINT. There are still some common declarations for the !KERNEL case in tcp_debug.h and spx_debug.h. trpt depends on the ones in tcp_debug.h.
1043 lines
29 KiB
C
1043 lines
29 KiB
C
/*
|
|
* Device-independent level for ATAPI drivers.
|
|
*
|
|
* Copyright (C) 1995 Cronyx Ltd.
|
|
* Author Serge Vakulenko, <vak@cronyx.ru>
|
|
*
|
|
* This software is distributed with NO WARRANTIES, not even the implied
|
|
* warranties for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
|
*
|
|
* Authors grant any other persons or organisations permission to use
|
|
* or modify this software as long as this message is kept with the software,
|
|
* all derivative works or modified versions.
|
|
*
|
|
* Version 1.9, Mon Oct 9 22:34:47 MSK 1995
|
|
*/
|
|
|
|
/*
|
|
* The ATAPI level is implemented as a machine-dependent layer
|
|
* between the device driver and the IDE controller.
|
|
* All the machine- and controller dependency is isolated inside
|
|
* the ATAPI level, while all the device dependency is located
|
|
* in the device subdriver.
|
|
*
|
|
* It seems that an ATAPI bus will became popular for medium-speed
|
|
* storage devices such as CD-ROMs, magneto-optical disks, tape streamers etc.
|
|
*
|
|
* To ease the development of new ATAPI drivers, the subdriver
|
|
* interface was designed to be as simple as possible.
|
|
*
|
|
* Three routines are available for the subdriver to access the device:
|
|
*
|
|
* struct atapires atapi_request_wait (ata, unit, cmd, a1, a2, a3, a4, a5,
|
|
* a6, a7, a8, a9, a10, a11, a12, a13, a14, a15, addr, count);
|
|
* struct atapi *ata; -- atapi controller descriptor
|
|
* int unit; -- device unit number on the IDE bus
|
|
* u_char cmd; -- ATAPI command code
|
|
* u_char a1..a15; -- ATAPI command arguments
|
|
* char *addr; -- address of the data buffer for i/o
|
|
* int count; -- data length, >0 for read ops, <0 for write ops
|
|
*
|
|
* The atapi_request_wait() function puts the op in the queue of ATAPI
|
|
* commands for the IDE controller, starts the controller, the waits for
|
|
* operation to be completed (using tsleep).
|
|
* The function should be called from the user phase only (open(), close(),
|
|
* ioctl() etc).
|
|
* Ata and unit args are the values which the subdriver gets from the ATAPI
|
|
* level via attach() call.
|
|
* Buffer pointed to by *addr should be placed in core memory, static
|
|
* or dynamic, but not in stack.
|
|
* The function returns the error code structure, which consists of:
|
|
* - atapi driver code value
|
|
* - controller status port value
|
|
* - controller error port value
|
|
*
|
|
* struct atapires atapi_request_immediate (ata, unit, cmd, a1, a2, a3,
|
|
* a4, a5, a6, a7, a8, a9, a10, a11, a12, a13, a14, a15,
|
|
* addr, count);
|
|
*
|
|
* The atapi_request_immediate() function is similar to atapi_request_wait(),
|
|
* but it does not use interrupts for performing the request.
|
|
* It should be used during an attach phase to get parameters from the device.
|
|
*
|
|
* void atapi_request_callback (ata, unit, cmd, a1, a2, a3, a4, a5,
|
|
* a6, a7, a8, a9, a10, a11, a12, a13, a14, a15,
|
|
* addr, count, done, x, y);
|
|
* struct atapi *ata; -- atapi controller descriptor
|
|
* int unit; -- device unit number on the IDE bus
|
|
* u_char cmd; -- ATAPI command code
|
|
* u_char a1..a15; -- ATAPI command arguments
|
|
* char *addr; -- address of the data buffer for i/o
|
|
* int count; -- data length, >0 for read ops, <0 for write ops
|
|
* void (*done)(); -- function to call when op finished
|
|
* void *x, *y; -- arguments for done() function
|
|
*
|
|
* The atapi_request_callback() function puts the op in the queue of ATAPI
|
|
* commands for the IDE controller, starts the controller, then returns.
|
|
* When the operation finishes, then the callback function done()
|
|
* will be called on the interrupt level.
|
|
* The function is designed to be callable from the interrupt phase.
|
|
* The done() functions is called with the following arguments:
|
|
* (void) (*done) (x, y, count, errcode)
|
|
* void *x, *y; -- arguments from the atapi_request_callback()
|
|
* int count; -- the data residual count
|
|
* struct atapires errcode; -- error code structure, see above
|
|
*
|
|
* The new driver could be added in three steps:
|
|
* 1. Add entries for the new driver to bdevsw and cdevsw tables in conf.c.
|
|
* You will need to make at least three routines: open(), close(),
|
|
* strategy() and possibly ioctl().
|
|
* 2. Make attach() routine, which should allocate all the needed data
|
|
* structures and print the device description string (see wcdattach()).
|
|
* 3. Add an appropriate case to the switch in atapi_attach() routine,
|
|
* call attach() routine of the new driver here. Add the appropriate
|
|
* #include line at the top of attach.c.
|
|
* That's all!
|
|
*
|
|
* Use #define DEBUG in atapi.c to enable tracing of all i/o operations
|
|
* on the IDE bus.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include "wdc.h"
|
|
#ifndef ATAPI_MODULE
|
|
# include "wcd.h"
|
|
/* # include "wmt.h" -- add your driver here */
|
|
/* # include "wmd.h" -- add your driver here */
|
|
#endif
|
|
|
|
#if NWDC > 0 && defined (ATAPI)
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <machine/clock.h>
|
|
#include <machine/cpufunc.h>
|
|
|
|
#ifdef ATAPI_MODULE
|
|
# define ATAPI_STATIC
|
|
#endif
|
|
|
|
#include <i386/isa/atapi.h>
|
|
|
|
#ifndef ATAPI_STATIC
|
|
/* this code is compiled as part of the kernel if options ATAPI */
|
|
/*
|
|
* In the case of loadable ATAPI driver we need to store
|
|
* the probe info for delayed attaching.
|
|
*/
|
|
struct atapidrv atapi_drvtab[4];
|
|
int atapi_ndrv;
|
|
struct atapi *atapi_tab;
|
|
|
|
int atapi_attach (int ctlr, int unit, int port, struct kern_devconf *parent)
|
|
{
|
|
atapi_drvtab[atapi_ndrv].ctlr = ctlr;
|
|
atapi_drvtab[atapi_ndrv].unit = unit;
|
|
atapi_drvtab[atapi_ndrv].port = port;
|
|
atapi_drvtab[atapi_ndrv].parent = parent;
|
|
atapi_drvtab[atapi_ndrv].attached = 0;
|
|
++atapi_ndrv;
|
|
return (1);
|
|
}
|
|
#else /* ATAPI_STATIC */
|
|
/* this code is compiled part of the module */
|
|
|
|
#ifdef DEBUG
|
|
# define print(s) printf s
|
|
#else
|
|
# define print(s) {/*void*/}
|
|
#endif
|
|
|
|
/*
|
|
* ATAPI packet command phase.
|
|
*/
|
|
#define PHASE_CMDOUT (ARS_DRQ | ARI_CMD)
|
|
#define PHASE_DATAIN (ARS_DRQ | ARI_IN)
|
|
#define PHASE_DATAOUT ARS_DRQ
|
|
#define PHASE_COMPLETED (ARI_IN | ARI_CMD)
|
|
#define PHASE_ABORTED 0 /* nonstandard - for NEC 260 */
|
|
|
|
struct atapi atapitab[NWDC];
|
|
|
|
static struct atapi_params *atapi_probe (int port, int unit);
|
|
static int atapi_wait (int port, u_char bits_wanted);
|
|
static void atapi_send_cmd (struct atapi *ata, struct atapicmd *ac);
|
|
static int atapi_io (struct atapi *ata, struct atapicmd *ac);
|
|
static int atapi_start_cmd (struct atapi *ata, struct atapicmd *ac);
|
|
static int atapi_wait_cmd (struct atapi *ata, struct atapicmd *ac);
|
|
|
|
extern int wdstart (int ctrlr);
|
|
extern int wcdattach(struct atapi*, int, struct atapi_params*, int, struct kern_devconf*);
|
|
|
|
/*
|
|
* Probe the ATAPI device at IDE controller `ctlr', drive `unit'.
|
|
* Called at splbio().
|
|
*/
|
|
#ifdef ATAPI_MODULE
|
|
static
|
|
#endif
|
|
int atapi_attach (int ctlr, int unit, int port, struct kern_devconf *parent)
|
|
{
|
|
struct atapi *ata = atapitab + ctlr;
|
|
struct atapi_params *ap;
|
|
char buf [sizeof(ap->model) + 1];
|
|
char revbuf [sizeof(ap->revision) + 1];
|
|
struct atapicmd *ac;
|
|
|
|
print (("atapi%d.%d at 0x%x: attach called\n", ctlr, unit, port));
|
|
ap = atapi_probe (port, unit);
|
|
if (! ap)
|
|
return (0);
|
|
|
|
bcopy (ap->model, buf, sizeof(buf)-1);
|
|
buf[sizeof(buf)-1] = 0;
|
|
|
|
bcopy (ap->revision, revbuf, sizeof(revbuf)-1);
|
|
revbuf[sizeof(revbuf)-1] = 0;
|
|
|
|
printf ("wdc%d: unit %d (atapi): <%s/%s>", ctlr, unit, buf, revbuf);
|
|
|
|
/* device is removable */
|
|
if (ap->removable)
|
|
printf (", removable");
|
|
|
|
/* packet command size */
|
|
switch (ap->cmdsz) {
|
|
case AT_PSIZE_12: break;
|
|
case AT_PSIZE_16: printf (", cmd16"); ata->cmd16 = 1; break;
|
|
default: printf (", cmd%d", ap->cmdsz);
|
|
}
|
|
|
|
/* DRQ type */
|
|
switch (ap->drqtype) {
|
|
case AT_DRQT_MPROC: ata->slow = 1; break;
|
|
case AT_DRQT_INTR: printf (", intr"); ata->intrcmd = 1; break;
|
|
case AT_DRQT_ACCEL: printf (", accel"); break;
|
|
default: printf (", drq%d", ap->drqtype);
|
|
}
|
|
|
|
/* overlap operation supported */
|
|
if (ap->ovlapflag)
|
|
printf (", ovlap");
|
|
|
|
/* interleaved DMA supported */
|
|
if (ap->idmaflag)
|
|
printf (", idma");
|
|
/* DMA supported */
|
|
else if (ap->dmaflag)
|
|
printf (", dma");
|
|
|
|
/* IORDY can be disabled */
|
|
if (ap->iordydis)
|
|
printf (", iordis");
|
|
/* IORDY supported */
|
|
else if (ap->iordyflag)
|
|
printf (", iordy");
|
|
|
|
printf ("\n");
|
|
|
|
ata->port = port;
|
|
ata->ctrlr = ctlr;
|
|
ata->parent = parent;
|
|
ata->attached[unit] = 0;
|
|
#ifdef DEBUG
|
|
ata->debug = 1;
|
|
#else
|
|
ata->debug = 0;
|
|
#endif
|
|
/* Initialize free queue. */
|
|
ata->cmdrq[15].next = 0;
|
|
for (ac = ata->cmdrq+14; ac >= ata->cmdrq; --ac)
|
|
ac->next = ac+1;
|
|
ata->free = ata->cmdrq;
|
|
|
|
if (ap->proto != AT_PROTO_ATAPI) {
|
|
printf ("wdc%d: unit %d: unknown ATAPI protocol=%d\n",
|
|
ctlr, unit, ap->proto);
|
|
free (ap, M_TEMP);
|
|
return (0);
|
|
}
|
|
#ifdef ATAPI_MODULE
|
|
ata->params[unit] = ap;
|
|
return (1);
|
|
#else
|
|
switch (ap->devtype) {
|
|
default:
|
|
/* unknown ATAPI device */
|
|
printf ("wdc%d: unit %d: unknown ATAPI type=%d\n",
|
|
ctlr, unit, ap->devtype);
|
|
break;
|
|
|
|
case AT_TYPE_DIRECT: /* direct-access */
|
|
case AT_TYPE_CDROM: /* CD-ROM device */
|
|
#if NWCD > 0
|
|
/* ATAPI CD-ROM */
|
|
if (wcdattach (ata, unit, ap, ata->debug, parent) < 0)
|
|
break;
|
|
/* Device attached successfully. */
|
|
ata->attached[unit] = 1;
|
|
return (1);
|
|
#else
|
|
printf ("wdc%d: ATAPI CD-ROMs not configured\n", ctlr);
|
|
break;
|
|
#endif
|
|
|
|
case AT_TYPE_TAPE: /* streaming tape (QIC-121 model) */
|
|
#if NWMT > 0
|
|
/* Add your driver here */
|
|
#else
|
|
printf ("wdc%d: ATAPI streaming tapes not supported yet\n", ctlr);
|
|
#endif
|
|
break;
|
|
|
|
case AT_TYPE_OPTICAL: /* optical disk */
|
|
#if NWMD > 0
|
|
/* Add your driver here */
|
|
#else
|
|
printf ("wdc%d: ATAPI optical disks not supported yet\n", ctlr);
|
|
#endif
|
|
break;
|
|
}
|
|
/* Attach failed. */
|
|
free (ap, M_TEMP);
|
|
return (0);
|
|
#endif /* ATAPI_MODULE */
|
|
}
|
|
|
|
static char *cmdname (u_char cmd)
|
|
{
|
|
static char buf[8];
|
|
|
|
switch (cmd) {
|
|
case 0x00: return ("TEST_UNIT_READY");
|
|
case 0x03: return ("REQUEST_SENSE");
|
|
case 0x1b: return ("START_STOP");
|
|
case 0x1e: return ("PREVENT_ALLOW");
|
|
case 0x25: return ("READ_CAPACITY");
|
|
case 0x28: return ("READ_BIG");
|
|
case 0x43: return ("READ_TOC");
|
|
case 0x42: return ("READ_SUBCHANNEL");
|
|
case 0x55: return ("MODE_SELECT_BIG");
|
|
case 0x5a: return ("MODE_SENSE");
|
|
case 0xb4: return ("PLAY_CD");
|
|
case 0x47: return ("PLAY_MSF");
|
|
case 0x4b: return ("PAUSE");
|
|
case 0x48: return ("PLAY_TRACK");
|
|
case 0xa5: return ("PLAY_BIG");
|
|
}
|
|
sprintf (buf, "[0x%x]", cmd);
|
|
return (buf);
|
|
}
|
|
|
|
static void bswap (char *buf, int len)
|
|
{
|
|
u_short *p = (u_short*) (buf + len);
|
|
while (--p >= (u_short*) buf)
|
|
*p = ntohs (*p);
|
|
}
|
|
|
|
static void btrim (char *buf, int len)
|
|
{
|
|
char *p;
|
|
|
|
/* Remove the trailing spaces. */
|
|
for (p=buf; p<buf+len; ++p)
|
|
if (! *p)
|
|
*p = ' ';
|
|
for (p=buf+len-1; p>=buf && *p==' '; --p)
|
|
*p = 0;
|
|
}
|
|
|
|
/*
|
|
* Issue IDENTIFY command to ATAPI drive to ask it what it is.
|
|
*/
|
|
static struct atapi_params *atapi_probe (int port, int unit)
|
|
{
|
|
struct atapi_params *ap;
|
|
char tb [DEV_BSIZE];
|
|
|
|
/* Wait for controller not busy. */
|
|
outb (port + AR_DRIVE, unit ? ARD_DRIVE1 : ARD_DRIVE0);
|
|
if (atapi_wait (port, 0) < 0) {
|
|
print (("atapiX.%d at 0x%x: controller busy, status=%b\n",
|
|
unit, port, inb (port + AR_STATUS), ARS_BITS));
|
|
return (0);
|
|
}
|
|
|
|
/* Issue ATAPI IDENTIFY command. */
|
|
outb (port + AR_DRIVE, unit ? ARD_DRIVE1 : ARD_DRIVE0);
|
|
outb (port + AR_COMMAND, ATAPIC_IDENTIFY);
|
|
|
|
/* Check that device is present. */
|
|
if (inb (port + AR_STATUS) == 0xff) {
|
|
print (("atapiX.%d at 0x%x: no device\n", unit, port));
|
|
if (unit == 1)
|
|
/* Select unit 0. */
|
|
outb (port + AR_DRIVE, ARD_DRIVE0);
|
|
return (0);
|
|
}
|
|
|
|
/* Wait for data ready. */
|
|
if (atapi_wait (port, ARS_DRQ) != 0) {
|
|
print (("atapiX.%d at 0x%x: identify not ready, status=%b\n",
|
|
unit, port, inb (port + AR_STATUS), ARS_BITS));
|
|
if (unit == 1)
|
|
/* Select unit 0. */
|
|
outb (port + AR_DRIVE, ARD_DRIVE0);
|
|
return (0);
|
|
}
|
|
|
|
/* Obtain parameters. */
|
|
insw (port + AR_DATA, tb, sizeof(tb) / sizeof(short));
|
|
|
|
ap = malloc (sizeof *ap, M_TEMP, M_NOWAIT);
|
|
if (! ap)
|
|
return (0);
|
|
bcopy (tb, ap, sizeof *ap);
|
|
|
|
/*
|
|
* Shuffle string byte order.
|
|
* Mitsumi and NEC drives don't need this.
|
|
*/
|
|
if (! ((ap->model[0] == 'N' && ap->model[1] == 'E') ||
|
|
(ap->model[0] == 'F' && ap->model[1] == 'X')))
|
|
bswap (ap->model, sizeof(ap->model));
|
|
bswap (ap->serial, sizeof(ap->serial));
|
|
bswap (ap->revision, sizeof(ap->revision));
|
|
|
|
/* Clean up the model name, serial and revision numbers. */
|
|
btrim (ap->model, sizeof(ap->model));
|
|
btrim (ap->serial, sizeof(ap->serial));
|
|
btrim (ap->revision, sizeof(ap->revision));
|
|
return (ap);
|
|
}
|
|
|
|
/*
|
|
* Wait uninterruptibly until controller is not busy and certain
|
|
* status bits are set.
|
|
* The wait is usually short unless it is for the controller to process
|
|
* an entire critical command.
|
|
* Return 1 for (possibly stale) controller errors, -1 for timeout errors,
|
|
* or 0 for no errors.
|
|
*/
|
|
static int atapi_wait (int port, u_char bits_wanted)
|
|
{
|
|
int cnt;
|
|
u_char s;
|
|
|
|
/* Wait 5 sec for BUSY deassert. */
|
|
for (cnt=500000; cnt>0; --cnt) {
|
|
s = inb (port + AR_STATUS);
|
|
if (! (s & ARS_BSY))
|
|
break;
|
|
DELAY (10);
|
|
}
|
|
if (cnt <= 0)
|
|
return (-1);
|
|
if (! bits_wanted)
|
|
return (s & ARS_CHECK);
|
|
|
|
/* Wait 50 msec for bits wanted. */
|
|
for (cnt=5000; cnt>0; --cnt) {
|
|
s = inb (port + AR_STATUS);
|
|
if ((s & bits_wanted) == bits_wanted)
|
|
return (s & ARS_CHECK);
|
|
DELAY (10);
|
|
}
|
|
return (-1);
|
|
}
|
|
|
|
void atapi_debug (struct atapi *ata, int on)
|
|
{
|
|
ata->debug = on;
|
|
}
|
|
|
|
static struct atapicmd *atapi_alloc (struct atapi *ata)
|
|
{
|
|
struct atapicmd *ac;
|
|
|
|
while (! ata->free)
|
|
tsleep ((caddr_t)ata, PRIBIO, "atacmd", 0);
|
|
ac = ata->free;
|
|
ata->free = ac->next;
|
|
ac->busy = 1;
|
|
return (ac);
|
|
}
|
|
|
|
static void atapi_free (struct atapi *ata, struct atapicmd *ac)
|
|
{
|
|
if (! ata->free)
|
|
wakeup ((caddr_t)&ata);
|
|
ac->busy = 0;
|
|
ac->next = ata->free;
|
|
ata->free = ac;
|
|
}
|
|
|
|
/*
|
|
* Add new command request to the end of the queue.
|
|
*/
|
|
static void atapi_enqueue (struct atapi *ata, struct atapicmd *ac)
|
|
{
|
|
ac->next = 0;
|
|
if (ata->tail)
|
|
ata->tail->next = ac;
|
|
else
|
|
ata->queue = ac;
|
|
ata->tail = ac;
|
|
}
|
|
|
|
static void atapi_done (struct atapi *ata)
|
|
{
|
|
struct atapicmd *ac = ata->queue;
|
|
|
|
if (! ac)
|
|
return; /* cannot happen */
|
|
|
|
ata->queue = ac->next;
|
|
if (! ata->queue)
|
|
ata->tail = 0;
|
|
|
|
if (ac->callback) {
|
|
(*ac->callback) (ac->cbarg1, ac->cbarg2, ac->count, ac->result);
|
|
atapi_free (ata, ac);
|
|
} else
|
|
wakeup ((caddr_t)ac);
|
|
}
|
|
|
|
/*
|
|
* Start new packet op. Called from wdstart().
|
|
* Return 1 if op started, and we are waiting for interrupt.
|
|
* Return 0 when idle.
|
|
*/
|
|
int atapi_start (int ctrlr)
|
|
{
|
|
struct atapi *ata = atapitab + ctrlr;
|
|
struct atapicmd *ac;
|
|
again:
|
|
ac = ata->queue;
|
|
if (! ac)
|
|
return (0);
|
|
|
|
/* Start packet command. */
|
|
if (atapi_start_cmd (ata, ac) < 0) {
|
|
atapi_done (ata);
|
|
goto again;
|
|
}
|
|
|
|
if (ata->intrcmd)
|
|
/* Wait for interrupt before sending packet command */
|
|
return (1);
|
|
|
|
/* Wait for DRQ. */
|
|
if (atapi_wait_cmd (ata, ac) < 0) {
|
|
atapi_done (ata);
|
|
goto again;
|
|
}
|
|
|
|
/* Send packet command. */
|
|
atapi_send_cmd (ata, ac);
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Start new packet op. Returns -1 on errors.
|
|
*/
|
|
int atapi_start_cmd (struct atapi *ata, struct atapicmd *ac)
|
|
{
|
|
ac->result.error = 0;
|
|
ac->result.status = 0;
|
|
|
|
outb (ata->port + AR_DRIVE, ac->unit ? ARD_DRIVE1 : ARD_DRIVE0);
|
|
if (atapi_wait (ata->port, 0) < 0) {
|
|
printf ("atapi%d.%d: controller not ready for cmd\n",
|
|
ata->ctrlr, ac->unit);
|
|
ac->result.code = RES_NOTRDY;
|
|
return (-1);
|
|
}
|
|
|
|
/* Set up the controller registers. */
|
|
outb (ata->port + AR_FEATURES, 0);
|
|
outb (ata->port + AR_IREASON, 0);
|
|
outb (ata->port + AR_TAG, 0);
|
|
outb (ata->port + AR_CNTLO, ac->count & 0xff);
|
|
outb (ata->port + AR_CNTHI, ac->count >> 8);
|
|
outb (ata->port + AR_COMMAND, ATAPIC_PACKET);
|
|
|
|
if (ata->debug)
|
|
printf ("atapi%d.%d: start\n", ata->ctrlr, ac->unit);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Wait for DRQ before sending packet cmd. Returns -1 on errors.
|
|
*/
|
|
int atapi_wait_cmd (struct atapi *ata, struct atapicmd *ac)
|
|
{
|
|
/* Wait for DRQ from 50 usec to 3 msec for slow devices */
|
|
int cnt = ata->intrcmd ? 10000 : ata->slow ? 3000 : 50;
|
|
int ireason = 0, phase = 0;
|
|
|
|
/* Wait for command phase. */
|
|
for (; cnt>0; cnt-=10) {
|
|
ireason = inb (ata->port + AR_IREASON);
|
|
ac->result.status = inb (ata->port + AR_STATUS);
|
|
phase = (ireason & (ARI_CMD | ARI_IN)) |
|
|
(ac->result.status & ARS_DRQ);
|
|
if (phase == PHASE_CMDOUT)
|
|
break;
|
|
DELAY (10);
|
|
}
|
|
|
|
if (phase != PHASE_CMDOUT) {
|
|
ac->result.code = RES_NODRQ;
|
|
ac->result.error = inb (ata->port + AR_ERROR);
|
|
printf ("atapi%d.%d: invalid command phase, ireason=0x%x, status=%b, error=%b\n",
|
|
ata->ctrlr, ac->unit, ireason,
|
|
ac->result.status, ARS_BITS,
|
|
ac->result.error, AER_BITS);
|
|
return (-1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Send packet cmd.
|
|
*/
|
|
void atapi_send_cmd (struct atapi *ata, struct atapicmd *ac)
|
|
{
|
|
outsw (ata->port + AR_DATA, ac->cmd, ata->cmd16 ? 8 : 6);
|
|
if (ata->debug)
|
|
printf ("atapi%d.%d: send cmd %s %x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x\n",
|
|
ata->ctrlr, ac->unit, cmdname (ac->cmd[0]), ac->cmd[0],
|
|
ac->cmd[1], ac->cmd[2], ac->cmd[3], ac->cmd[4],
|
|
ac->cmd[5], ac->cmd[6], ac->cmd[7], ac->cmd[8],
|
|
ac->cmd[9], ac->cmd[10], ac->cmd[11], ac->cmd[12],
|
|
ac->cmd[13], ac->cmd[14], ac->cmd[15]);
|
|
}
|
|
|
|
/*
|
|
* Interrupt routine for the controller. Called from wdintr().
|
|
* Finish the started op, wakeup wait-type commands,
|
|
* run callbacks for callback-type commands, then return.
|
|
* Do not start new op here, it will be done by wdstart,
|
|
* which is called just after us.
|
|
* Return 1 if op continues, and we are waiting for new interrupt.
|
|
* Return 0 when idle.
|
|
*/
|
|
int atapi_intr (int ctrlr)
|
|
{
|
|
struct atapi *ata = atapitab + ctrlr;
|
|
struct atapicmd *ac = ata->queue;
|
|
|
|
if (! ac) {
|
|
printf ("atapi%d: stray interrupt\n", ata->ctrlr);
|
|
return (0);
|
|
}
|
|
if (atapi_io (ata, ac) > 0)
|
|
return (1);
|
|
atapi_done (ata);
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Process the i/o phase, transferring the command/data to/from the device.
|
|
* Return 1 if op continues, and we are waiting for new interrupt.
|
|
* Return 0 when idle.
|
|
*/
|
|
int atapi_io (struct atapi *ata, struct atapicmd *ac)
|
|
{
|
|
u_char ireason;
|
|
u_short len, i;
|
|
|
|
if (atapi_wait (ata->port, 0) < 0) {
|
|
ac->result.status = inb (ata->port + AR_STATUS);
|
|
ac->result.error = inb (ata->port + AR_ERROR);
|
|
ac->result.code = RES_NOTRDY;
|
|
printf ("atapi%d.%d: controller not ready, status=%b, error=%b\n",
|
|
ata->ctrlr, ac->unit, ac->result.status, ARS_BITS,
|
|
ac->result.error, AER_BITS);
|
|
return (0);
|
|
}
|
|
|
|
ac->result.status = inb (ata->port + AR_STATUS);
|
|
ac->result.error = inb (ata->port + AR_ERROR);
|
|
len = inb (ata->port + AR_CNTLO);
|
|
len |= inb (ata->port + AR_CNTHI) << 8;
|
|
ireason = inb (ata->port + AR_IREASON);
|
|
|
|
if (ata->debug) {
|
|
printf ("atapi%d.%d: intr ireason=0x%x, len=%d, status=%b, error=%b\n",
|
|
ata->ctrlr, ac->unit, ireason, len,
|
|
ac->result.status, ARS_BITS,
|
|
ac->result.error, AER_BITS);
|
|
}
|
|
switch ((ireason & (ARI_CMD | ARI_IN)) | (ac->result.status & ARS_DRQ)) {
|
|
default:
|
|
printf ("atapi%d.%d: unknown phase\n", ata->ctrlr, ac->unit);
|
|
ac->result.code = RES_ERR;
|
|
break;
|
|
|
|
case PHASE_CMDOUT:
|
|
/* Send packet command. */
|
|
if (! (ac->result.status & ARS_DRQ)) {
|
|
printf ("atapi%d.%d: no cmd drq\n",
|
|
ata->ctrlr, ac->unit);
|
|
ac->result.code = RES_NODRQ;
|
|
break;
|
|
}
|
|
atapi_send_cmd (ata, ac);
|
|
return (1);
|
|
|
|
case PHASE_DATAOUT:
|
|
/* Write data */
|
|
if (ac->count > 0) {
|
|
printf ("atapi%d.%d: invalid data direction\n",
|
|
ata->ctrlr, ac->unit);
|
|
ac->result.code = RES_INVDIR;
|
|
break;
|
|
}
|
|
if (-ac->count < len) {
|
|
print (("atapi%d.%d: send data underrun, %d bytes left\n",
|
|
ata->ctrlr, ac->unit, -ac->count));
|
|
ac->result.code = RES_UNDERRUN;
|
|
outsw (ata->port + AR_DATA, ac->addr,
|
|
-ac->count / sizeof(short));
|
|
for (i= -ac->count; i<len; i+=sizeof(short))
|
|
outw (ata->port + AR_DATA, 0);
|
|
} else
|
|
outsw (ata->port + AR_DATA, ac->addr,
|
|
len / sizeof(short));
|
|
ac->addr += len;
|
|
ac->count += len;
|
|
return (1);
|
|
|
|
case PHASE_DATAIN:
|
|
/* Read data */
|
|
if (ac->count < 0) {
|
|
printf ("atapi%d.%d: invalid data direction\n",
|
|
ata->ctrlr, ac->unit);
|
|
ac->result.code = RES_INVDIR;
|
|
break;
|
|
}
|
|
if (ac->count < len) {
|
|
print (("atapi%d.%d: recv data overrun, %d bytes left\n",
|
|
ata->ctrlr, ac->unit, ac->count));
|
|
ac->result.code = RES_OVERRUN;
|
|
insw (ata->port + AR_DATA, ac->addr,
|
|
ac->count / sizeof(short));
|
|
for (i=ac->count; i<len; i+=sizeof(short))
|
|
inw (ata->port + AR_DATA);
|
|
} else
|
|
insw (ata->port + AR_DATA, ac->addr,
|
|
len / sizeof(short));
|
|
ac->addr += len;
|
|
ac->count -= len;
|
|
return (1);
|
|
|
|
case PHASE_ABORTED:
|
|
case PHASE_COMPLETED:
|
|
if (ac->result.status & (ARS_CHECK | ARS_DF))
|
|
ac->result.code = RES_ERR;
|
|
else if (ac->count < 0) {
|
|
print (("atapi%d.%d: send data overrun, %d bytes left\n",
|
|
ata->ctrlr, ac->unit, -ac->count));
|
|
ac->result.code = RES_OVERRUN;
|
|
} else if (ac->count > 0) {
|
|
print (("atapi%d.%d: recv data underrun, %d bytes left\n",
|
|
ata->ctrlr, ac->unit, ac->count));
|
|
ac->result.code = RES_UNDERRUN;
|
|
bzero (ac->addr, ac->count);
|
|
} else
|
|
ac->result.code = RES_OK;
|
|
break;
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Queue new packet request, then call wdstart().
|
|
* Called on splbio().
|
|
*/
|
|
void atapi_request_callback (struct atapi *ata, int unit,
|
|
u_char cmd, u_char a1, u_char a2, u_char a3, u_char a4,
|
|
u_char a5, u_char a6, u_char a7, u_char a8, u_char a9,
|
|
u_char a10, u_char a11, u_char a12, u_char a13, u_char a14, u_char a15,
|
|
char *addr, int count, atapi_callback_t *done, void *x, void *y)
|
|
{
|
|
struct atapicmd *ac;
|
|
|
|
ac = atapi_alloc (ata);
|
|
ac->cmd[0] = cmd; ac->cmd[1] = a1;
|
|
ac->cmd[2] = a2; ac->cmd[3] = a3;
|
|
ac->cmd[4] = a4; ac->cmd[5] = a5;
|
|
ac->cmd[6] = a6; ac->cmd[7] = a7;
|
|
ac->cmd[8] = a8; ac->cmd[9] = a9;
|
|
ac->cmd[10] = a10; ac->cmd[11] = a11;
|
|
ac->cmd[12] = a12; ac->cmd[13] = a13;
|
|
ac->cmd[14] = a14; ac->cmd[15] = a15;
|
|
ac->unit = unit;
|
|
ac->addr = addr;
|
|
ac->count = count;
|
|
ac->callback = done;
|
|
ac->cbarg1 = x;
|
|
ac->cbarg2 = y;
|
|
|
|
if (ata->debug)
|
|
printf ("atapi%d.%d: req cb %x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x len=%d\n",
|
|
ata->ctrlr, ac->unit, ac->cmd[0], ac->cmd[1],
|
|
ac->cmd[2], ac->cmd[3], ac->cmd[4], ac->cmd[5],
|
|
ac->cmd[6], ac->cmd[7], ac->cmd[8], ac->cmd[9],
|
|
ac->cmd[10], ac->cmd[11], ac->cmd[12],
|
|
ac->cmd[13], ac->cmd[14], ac->cmd[15], count);
|
|
atapi_enqueue (ata, ac);
|
|
wdstart (ata->ctrlr);
|
|
}
|
|
|
|
/*
|
|
* Queue new packet request, then call wdstart().
|
|
* Wait until the request is finished.
|
|
* Called on spl0().
|
|
* Return atapi error.
|
|
* Buffer pointed to by *addr should be placed in core memory, not in stack!
|
|
*/
|
|
struct atapires atapi_request_wait (struct atapi *ata, int unit,
|
|
u_char cmd, u_char a1, u_char a2, u_char a3, u_char a4,
|
|
u_char a5, u_char a6, u_char a7, u_char a8, u_char a9,
|
|
u_char a10, u_char a11, u_char a12, u_char a13, u_char a14, u_char a15,
|
|
char *addr, int count)
|
|
{
|
|
struct atapicmd *ac;
|
|
int x = splbio ();
|
|
struct atapires result;
|
|
|
|
ac = atapi_alloc (ata);
|
|
ac->cmd[0] = cmd; ac->cmd[1] = a1;
|
|
ac->cmd[2] = a2; ac->cmd[3] = a3;
|
|
ac->cmd[4] = a4; ac->cmd[5] = a5;
|
|
ac->cmd[6] = a6; ac->cmd[7] = a7;
|
|
ac->cmd[8] = a8; ac->cmd[9] = a9;
|
|
ac->cmd[10] = a10; ac->cmd[11] = a11;
|
|
ac->cmd[12] = a12; ac->cmd[13] = a13;
|
|
ac->cmd[14] = a14; ac->cmd[15] = a15;
|
|
ac->unit = unit;
|
|
ac->addr = addr;
|
|
ac->count = count;
|
|
ac->callback = 0;
|
|
ac->cbarg1 = 0;
|
|
ac->cbarg2 = 0;
|
|
|
|
if (ata->debug)
|
|
printf ("atapi%d.%d: req w %x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x len=%d\n",
|
|
ata->ctrlr, ac->unit, ac->cmd[0], ac->cmd[1],
|
|
ac->cmd[2], ac->cmd[3], ac->cmd[4], ac->cmd[5],
|
|
ac->cmd[6], ac->cmd[7], ac->cmd[8], ac->cmd[9],
|
|
ac->cmd[10], ac->cmd[11], ac->cmd[12],
|
|
ac->cmd[13], ac->cmd[14], ac->cmd[15], count);
|
|
atapi_enqueue (ata, ac);
|
|
wdstart (ata->ctrlr);
|
|
tsleep ((caddr_t)ac, PRIBIO, "atareq", 0);
|
|
|
|
result = ac->result;
|
|
atapi_free (ata, ac);
|
|
splx (x);
|
|
return (result);
|
|
}
|
|
|
|
/*
|
|
* Perform a packet command on the device.
|
|
* Should be called on splbio().
|
|
* Return atapi error.
|
|
*/
|
|
struct atapires atapi_request_immediate (struct atapi *ata, int unit,
|
|
u_char cmd, u_char a1, u_char a2, u_char a3, u_char a4,
|
|
u_char a5, u_char a6, u_char a7, u_char a8, u_char a9,
|
|
u_char a10, u_char a11, u_char a12, u_char a13, u_char a14, u_char a15,
|
|
char *addr, int count)
|
|
{
|
|
struct atapicmd cmdbuf, *ac = &cmdbuf;
|
|
int cnt;
|
|
|
|
ac->cmd[0] = cmd; ac->cmd[1] = a1;
|
|
ac->cmd[2] = a2; ac->cmd[3] = a3;
|
|
ac->cmd[4] = a4; ac->cmd[5] = a5;
|
|
ac->cmd[6] = a6; ac->cmd[7] = a7;
|
|
ac->cmd[8] = a8; ac->cmd[9] = a9;
|
|
ac->cmd[10] = a10; ac->cmd[11] = a11;
|
|
ac->cmd[12] = a12; ac->cmd[13] = a13;
|
|
ac->cmd[14] = a14; ac->cmd[15] = a15;
|
|
ac->unit = unit;
|
|
ac->addr = addr;
|
|
ac->count = count;
|
|
ac->callback = 0;
|
|
ac->cbarg1 = 0;
|
|
ac->cbarg2 = 0;
|
|
|
|
if (ata->debug)
|
|
printf ("atapi%d.%d: req im %x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x-%x len=%d\n",
|
|
ata->ctrlr, ac->unit, ac->cmd[0], ac->cmd[1],
|
|
ac->cmd[2], ac->cmd[3], ac->cmd[4], ac->cmd[5],
|
|
ac->cmd[6], ac->cmd[7], ac->cmd[8], ac->cmd[9],
|
|
ac->cmd[10], ac->cmd[11], ac->cmd[12],
|
|
ac->cmd[13], ac->cmd[14], ac->cmd[15], count);
|
|
|
|
/* Start packet command, wait for DRQ. */
|
|
if (atapi_start_cmd (ata, ac) >= 0 && atapi_wait_cmd (ata, ac) >= 0) {
|
|
/* Send packet command. */
|
|
atapi_send_cmd (ata, ac);
|
|
|
|
/* Wait for data i/o phase. */
|
|
for (cnt=20000; cnt>0; --cnt)
|
|
if (((inb (ata->port + AR_IREASON) & (ARI_CMD | ARI_IN)) |
|
|
(inb (ata->port + AR_STATUS) & ARS_DRQ)) != PHASE_CMDOUT)
|
|
break;
|
|
|
|
/* Do all needed i/o. */
|
|
while (atapi_io (ata, ac))
|
|
/* Wait for DRQ deassert. */
|
|
for (cnt=2000; cnt>0; --cnt)
|
|
if (! (inb (ata->port + AR_STATUS) & ARS_DRQ))
|
|
break;
|
|
}
|
|
return (ac->result);
|
|
}
|
|
#endif /* ATAPI_STATIC */
|
|
|
|
#if defined (ATAPI_MODULE) || !defined(ATAPI_STATIC)
|
|
int (*atapi_start_ptr) (int ctrlr);
|
|
int (*atapi_intr_ptr) (int ctrlr);
|
|
void (*atapi_debug_ptr) (struct atapi *ata, int on);
|
|
struct atapires (*atapi_request_wait_ptr) (struct atapi *ata, int unit,
|
|
u_char cmd, u_char a1, u_char a2, u_char a3, u_char a4,
|
|
u_char a5, u_char a6, u_char a7, u_char a8, u_char a9,
|
|
u_char a10, u_char a11, u_char a12, u_char a13, u_char a14, u_char a15,
|
|
char *addr, int count);
|
|
void (*atapi_request_callback_ptr) (struct atapi *ata, int unit,
|
|
u_char cmd, u_char a1, u_char a2, u_char a3, u_char a4,
|
|
u_char a5, u_char a6, u_char a7, u_char a8, u_char a9,
|
|
u_char a10, u_char a11, u_char a12, u_char a13, u_char a14, u_char a15,
|
|
char *addr, int count, atapi_callback_t *done, void *x, void *y);
|
|
struct atapires (*atapi_request_immediate_ptr) (struct atapi *ata, int unit,
|
|
u_char cmd, u_char a1, u_char a2, u_char a3, u_char a4,
|
|
u_char a5, u_char a6, u_char a7, u_char a8, u_char a9,
|
|
u_char a10, u_char a11, u_char a12, u_char a13, u_char a14, u_char a15,
|
|
char *addr, int count);
|
|
#endif
|
|
|
|
#ifdef ATAPI_MODULE
|
|
/*
|
|
* ATAPI loadable driver stubs.
|
|
*/
|
|
#include <sys/exec.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/sysent.h>
|
|
#include <sys/lkm.h>
|
|
|
|
extern int atapi_lock (int ctlr);
|
|
/*
|
|
* XXX "ioconf.h" is not included by <sys/conf.h> for lkms, so we need this
|
|
* misplaced declaration.
|
|
*/
|
|
extern void wdintr (int);
|
|
|
|
/*
|
|
* Construct lkm_misc structure (see lkm.h).
|
|
*/
|
|
MOD_MISC(atapi);
|
|
|
|
int atapi_locked;
|
|
|
|
int atapi_lock (int ctlr)
|
|
{
|
|
atapi_locked = 1;
|
|
wakeup (&atapi_locked);
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Function called when loading the driver.
|
|
*/
|
|
static int atapi_load (struct lkm_table *lkmtp, int cmd)
|
|
{
|
|
struct atapidrv *d;
|
|
int n, x;
|
|
|
|
/*
|
|
* Probe all free IDE units, searching for ATAPI drives.
|
|
*/
|
|
n = 0;
|
|
for (d=atapi_drvtab; d<atapi_drvtab+atapi_ndrv && d->port; ++d) {
|
|
/* Lock the controller. */
|
|
x = splbio ();
|
|
atapi_locked = 0;
|
|
atapi_start_ptr = atapi_lock;
|
|
wdstart (d->ctlr);
|
|
while (! atapi_locked)
|
|
tsleep (&atapi_locked, PRIBIO, "atach", 0);
|
|
|
|
/* Probe the drive. */
|
|
if (atapi_attach (d->ctlr, d->unit, d->port, d->parent)) {
|
|
d->attached = 1;
|
|
++n;
|
|
}
|
|
|
|
/* Unlock the controller. */
|
|
atapi_start_ptr = 0;
|
|
wdintr (d->ctlr);
|
|
splx (x);
|
|
}
|
|
if (! n)
|
|
return ENXIO;
|
|
atapi_start_ptr = atapi_start;
|
|
atapi_intr_ptr = atapi_intr;
|
|
atapi_debug_ptr = atapi_debug;
|
|
atapi_request_wait_ptr = atapi_request_wait;
|
|
atapi_request_callback_ptr = atapi_request_callback;
|
|
atapi_request_immediate_ptr = atapi_request_immediate;
|
|
atapi_tab = atapitab;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Function called when unloading the driver.
|
|
*/
|
|
static int atapi_unload (struct lkm_table *lkmtp, int cmd)
|
|
{
|
|
struct atapi *ata;
|
|
int u;
|
|
|
|
for (ata=atapi_tab; ata<atapi_tab+2; ++ata)
|
|
if (ata->port)
|
|
for (u=0; u<2; ++u)
|
|
if (ata->attached[u])
|
|
return EBUSY;
|
|
for (ata=atapi_tab; ata<atapi_tab+2; ++ata)
|
|
if (ata->port)
|
|
for (u=0; u<2; ++u)
|
|
if (ata->params[u]) {
|
|
free (ata->params[u], M_TEMP);
|
|
ata->params[u] = 0;
|
|
}
|
|
atapi_start_ptr = 0;
|
|
atapi_intr_ptr = 0;
|
|
atapi_debug_ptr = 0;
|
|
atapi_request_wait_ptr = 0;
|
|
atapi_request_callback_ptr = 0;
|
|
atapi_request_immediate_ptr = 0;
|
|
atapi_tab = 0;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Dispatcher function for the module (load/unload/stat).
|
|
*/
|
|
int atapi_mod (struct lkm_table *lkmtp, int cmd, int ver)
|
|
{
|
|
DISPATCH (lkmtp, cmd, ver, atapi_load, atapi_unload, lkm_nullcmd);
|
|
}
|
|
#endif /* ATAPI_MODULE */
|
|
|
|
#endif /* NWDC && ATAPI */
|