mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-21 11:13:30 +00:00
Code Issues Releases Activity
ecee5704ed
freebsd/sys/boot/forth/loader.conf
Christian Brueffer 89a14234bd Add the beastie_disable variable which allows to turn the beastie 
boot menu on and off.

Reviewed by:	scottl
2003-07-01 01:03:32 +00:00

345 lines
15 KiB
Plaintext
Raw Blame History

# This is loader.conf - a file full of useful variables that you can
# set to change the default load behavior of your system. You should
# not edit this file! Put any overrides into one of the
# loader_conf_files instead and you will be able to update these
# defaults later without spamming your local configuration information.
#
# All arguments must be in double quotes.
#
# $FreeBSD$
##############################################################
### Basic configuration options ############################
##############################################################
exec=".( Loading /boot/defaults/loader.conf ) cr"
kernel="kernel" # /boot sub-directory containing kernel and modules
bootfile="kernel" # Kernel name (possibly absolute path)
kernel_options=""
userconfig_script_load="NO"
userconfig_script_name="/boot/kernel.conf"
userconfig_script_type="userconfig_script"
loader_conf_files="/boot/device.hints /boot/loader.conf /boot/loader.conf.local"
nextboot_conf="/boot/nextboot.conf"
nextboot_enable="NO"
verbose_loading="NO" # Set to YES for verbose loader output
##############################################################
### Splash screen configuration ############################
##############################################################
splash_bmp_load="NO" # Set this to YES for bmp splash screen!
splash_pcx_load="NO" # Set this to YES for pcx splash screen!
vesa_load="NO" # Set this to YES to load the vesa module
bitmap_load="NO" # Set this to YES if you want splash screen!
bitmap_name="splash.bmp" # Set this to the name of the bmp or pcx file
bitmap_type="splash_image_data" # and place it on the module_path
##############################################################
### Loader settings ########################################
##############################################################
#autoboot_delay="10" # Delay in seconds before autobooting
#beastie_disable="NO" # Turn the beastie boot menu on and off
#console="vidconsole" # Set the current console
#currdev="disk1s1a" # Set the current device
module_path="/boot/kernel;/boot/modules" # Set the module search path
#prompt="\\${interpret}" # Set the command prompt
#root_disk_unit="0" # Force the root disk unit number
#rootdev="disk1s1a" # Set the root filesystem
##############################################################
### Kernel settings ########################################
##############################################################
# The following boot_ variables are enabled
# by setting them to any value.
#boot_askname="" # Prompt the user for the name of the root device
#boot_ddb="" # Instructs the kernel to start in the DDB debugger
#boot_gdb="" # Selects gdb-remote mode for the kernel debugger
#boot_single="" # Start system in single-user mode
#boot_userconfig="" # Run kernel's interactive device configuration program
#boot_verbose="" # Causes extra debugging information to be printed
#init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/stand/sysinstall"
# Sets the list of init candidates
#dumpdev="ad0s1b" # Set device for crash dumps
##############################################################
### Kernel tunables ########################################
##############################################################
#hw.physmem="1G" # Limit phyiscal memory. See loader(8)
#kern.dfldsiz="" # Set the initial data size limit
#kern.dflssiz="" # Set the initial stack size limit
#kern.hz="100" # Set the kernel interval timer rate
#kern.maxbcache="" # Set the max buffer cache KVA storage
#kern.maxdsiz="" # Set the max data size
#kern.maxfiles="" # Set the sys. wide open files limit
#kern.maxproc="" # Set the maximum # of processes
#kern.maxssiz="" # Set the max stack size
#kern.maxswzone="" # Set the max swmeta KVA storage
#kern.maxtsiz="" # Set the max text size
#kern.maxusers="32" # Set size of various static tables
#kern.nbuf="" # Set the number of buffer headers
#kern.ncallout="" # Set the maximum # of timer events
#kern.sgrowsiz="" # Set the amount to grow stack
#kern.cam.scsi_delay="2000" # Delay (in ms) before probing SCSI
#kern.ipc.maxsockets="" # Set the maximum number of sockets avaliable
#kern.ipc.nmbclusters="" # Set the number of mbuf clusters
#kern.ipc.nmbufs="" # Set the maximum number of mbufs
#kern.ipc.nsfbufs="" # Set the number of sendfile(2) bufs
#kern.vm.kmem.size="" # Sets the size of kernel memory (bytes)
#net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE
#vfs.root.mountfrom="" # Specify root partition in a way the
# kernel understands
#debug.ktr.cpumask="0xf" # Bitmask of CPUs to enable KTR on
#debug.ktr.mask="0x1200" # Bitmask of KTR events to enable
#debug.ktr.verbose="1" # Enable console dump of KTR events
#net.graph.maxalloc="128" # Maximum number of queue items to allocate
#net.graph.ngqfreemax="64" # Maximum number of free queue items to cache
##############################################################
### Filesystem and related modules #########################
##############################################################
# Filesystems
cd9660_load="NO" # ISO 9660 filesystem
coda_load="NO" # CODA filesystem
fdescfs_load="NO" # Filedescriptors filesystem
msdosfs_load="NO" # FAT-12/16/32
nfs_load="NO" # NFS
ntfs_load="NO" # NTFS
nullfs_load="NO" # Null filesystem
portalfs_load="NO" # Portal filesystem
procfs_load="NO" # Process filesystem
umapfs_load="NO" # User-id map filesystem
unionfs_load="NO" # Union filesystem
# Related stuff
ccd_load="NO" # Concatenated disk driver
vinum_load="NO" # Concatenated/mirror/raid driver
md_load="NO" # Memory disk driver (vnode/swap/malloc)
##############################################################
### Screen saver modules ###################################
##############################################################
# This is best done in rc.conf
screensave_load="NO" # Set to YES to load a screensaver module
screensave_name="green_saver" # Set to the name of the screensaver module
##############################################################
### Emulation modules ######################################
##############################################################
fpu_load="NO" # Floating point emulation
gnufpu_load="NO" # GNU floating point emulation
ibcs2_load="NO" # IBCS2 (SCO) emulation
ibcs2_coff_load="NO"
linux_load="NO" # Linux emulation
svr4_load="NO" # SystemV R4 emulation
streams_load="NO" # System V streams module
##############################################################
### Networking modules #####################################
##############################################################
if_disc_load="NO" # Discard device
if_ef_load="NO" # pseudo-device providing support for multiple ethernet frame types
if_faith_load="NO" # IPv6-to-IPv4 TCP relay capturing interface
if_gif_load="NO" # generic tunnel interface
if_gre_load="NO" # encapsulating network device
if_ppp_load="NO" # Kernel ppp
if_sl_load="NO" # SLIP
if_stf_load="NO" # 6to4 tunnel interface
if_tap_load="NO" # Ethernet tunnel software network interface
if_tun_load="NO" # Tunnel driver (user process ppp)
if_vlan_load="NO" # IEEE 802.1Q VLAN network interface
ipfw_load="NO" # Firewall
##############################################################
### Networking drivers #####################################
##############################################################
miibus_load="NO" # miibus support, needed for some drivers
if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs
if_ar_load="NO" # Digi SYNC/570i
if_awi_load="NO" # AMD PCnetMobile IEEE 802.11 wireless NICs
if_bge_load="NO" # Broadcom BCM570x PCI gigabit ethernet
if_cm_load="NO" # SMC (90c26, 90c56, 90c66)
if_dc_load="NO" # DEC/Intel 21143 and various workalikes
if_de_load="NO" # DEC DC21x4x ethernet
if_ed_load="NO" # National Semiconductor DS8390/WD83C690 ethernet
if_el_load="NO" # 3Com Etherlink 3C501
if_em_load="NO" # Intel(R) PRO/1000 gigabit ethernet
if_en_load="NO" # Midway-based ATM interfaces
if_ep_load="NO" # 3Com Etherlink III (3c5x9)
if_ex_load="NO" # Intel EtherExpress Pro/10 ethernet
if_fe_load="NO" # Fujitsu MB86960A/MB86965A based Ethernet adapters
if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558)
if_gx_load="NO" # Intel Pro/1000 gigabit ethernet
if_ie_load="NO" # Intel 82586
if_lge_load="NO" # Level 1 LXT1001 NetCellerator PCI gigabit ethernet
if_lnc_load="NO" # AMD Lance/PCnet Ethernet
if_my_load="NO" # Myson PCI fast ethernet
if_nge_load="NO" # National Semiconductor PCI gigabit ethernet
if_oltr_load="NO" # Olicom
if_pcn_load="NO" # AMD PCnet PCI
if_ray_load="NO" # Raytheon Raylink/Webgear Aviator PCCard
if_rl_load="NO" # RealTek 8129/8139
if_sbni_load="NO" # Granch SBNI12 leased line adapters
if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire")
if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016
if_sk_load="NO" # SysKonnect SK-984x series PCI gigabit ethernet
if_sn_load="NO" # SMC 91Cxx
if_sr_load="NO" # synchronous RISCom/N2 / WANic 400/405
if_ste_load="NO" # Sundance Technologies ST201 fast ethernet
if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2
if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN")
if_tx_load="NO" # SMC 83c17x fast ethernet
if_txp_load="NO" # 3Com 3XP Typhoon/Sidewinder (3CR990)
if_vr_load="NO" # VIA Rhine I and Rhine II
if_vx_load="NO" # 3Com 3C590 family
if_wb_load="NO" # Winbond W89C840F
if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs
if_wx_load="NO" # Intel Gigabit Ethernet
if_xe_load="NO" # Xircom CreditCard PCMCIA
if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B)
##############################################################
### Netgraph modules #######################################
##############################################################
ng_UI_load="NO" # UI netgraph node type
ng_async_load="NO" # asynchronous framing netgraph node type
ng_bpf_load="NO" # Berkeley packet filter netgraph node type
ng_bridge_load="NO" # Ethernet bridging netgraph node type
ng_cisco_load="NO" # Cisco HDLC protocol netgraph node type
ng_echo_load="NO" # Netgraph echo node type
ng_ether_load="NO" # Ethernet netgraph node type
ng_frame_relay_load="NO" # frame relay netgraph node type
ng_hole_load="NO" # Netgraph discard node type
ng_iface_load="NO" # interface Netgraph node type
ng_ksocket_load="NO" # kernel socket netgraph node type
ng_lmi_load="NO" # frame relay LMI protocol netgraph node type
ng_mppc_load="NO" # Microsoft MPPC/MPPE compression and encryption netgraph node type
ng_one2many_load="NO" # packet multiplexing netgraph node type
ng_ppp_load="NO" # PPP protocol netgraph node type
ng_pppoe_load="NO" # RFC 2516 PPPOE protocol netgraph node type
ng_pptpgre_load="NO" # PPTP GRE protocol netgraph node type
ng_rfc1490_load="NO" # RFC 1490 netgraph node type
ng_socket_load="NO" # Netgraph socket node type
ng_tee_load="NO" # Netgraph ``tee'' node type
ng_tty_load="NO" # Netgraph node type that is also a line discipline
ng_vjc_load="NO" # Van Jacobsen compression netgraph node type
##############################################################
### Sound modules ##########################################
##############################################################
snd_pcm_load="NO" # Digital sound subsystem
snd_ad1816_load="NO" # ad1816
snd_cmi_load="NO" # cmi
snd_csa_load="NO" # csa
snd_cs4281_load="NO" # cs4281
snd_ds1_load="NO" # ds1
snd_emu10k1_load="NO" # Creative Sound Blaster Live
snd_ess_load="NO" # ess
snd_es137x_load="NO" # es137x
snd_fm801_load="NO" # fm801
snd_ich_load="NO" # Intel ICH
snd_maestro_load="NO" # Maestro
snd_maestro3_load="NO" # Maestro3
snd_mss_load="NO" # Mss
snd_neomagic_load="NO" # Neomagic
snd_sbc_load="NO" # Sbc
snd_sb8_load="NO" # Sound Blaster Pro
snd_sb16_load="NO" # Sound Blaster 16
snd_solo_load="NO" # Solo
snd_t4dwave_load="NO" # t4dwave
snd_via8233_load="NO" # via8233
snd_via82c686_load="NO" # via82c686
snd_driver_load="NO" # All sound drivers
##############################################################
### USB modules ############################################
##############################################################
usb_load="NO" # USB subsystem
udbp_load="NO" # USB double bulk pipe host 2 host cables
ugen_load="NO" # USB generic device, if all else fails ...
ufm_load="NO" # Fm Radio
uhid_load="NO" # Human Interface Devices
ukbd_load="NO" # Keyboard
ulpt_load="NO" # Printer
ums_load="NO" # Mouse
umass_load="NO" # Mass Storage Devices
umodem_load="NO" # Modems
uscanner_load="NO" # Scanners
if_aue_load="NO" # ADMtek USB ethernet
if_axe_load="NO" # ASIX Electronics AX88172 USB ethernet
if_cue_load="NO" # CATC USB ethernet
if_kue_load="NO" # Kawasaki LSI USB ethernet
##############################################################
### Other modules ##########################################
##############################################################
bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card
ispfw_load="NO" # Qlogic ISP Firmware
agp_load="NO" # agp module
accf_data_load="NO" # Wait for data accept filter
accf_http_load="NO" # Wait for full HTTP request accept filter
random_load="NO" # Random device
atspeaker_load="NO" # AT speaker module
##############################################################
### ACPI settings ##########################################
##############################################################
acpi_dsdt_load="NO" # DSDT Overriding
acpi_dsdt_type="acpi_dsdt" # Don't change this
acpi_dsdt_name="/boot/acpi_dsdt.aml"
# Override DSDT in BIOS by this file
##############################################################
### TrustedBSD MAC settings ##################################
##############################################################
mac_biba_load="NO" # Biba MAC policy
mac_bsdextended_load="NO" # BSD/extended MAC policy
mac_ifoff="NO" # Interface silencing policy
mac_mls_load="NO" # MLS MAC policy
mac_none_load="NO" # Null MAC policy
mac_partition_load="NO" # Partition MAC policy
mac_seeotheruids_load="NO" # UID visbility MAC policy
##############################################################
### Module loading syntax example ##########################
##############################################################
#module_load="YES" # loads module "module"
#module_name="realname" # uses "realname" instead of "module"
#module_type="type" # passes "-t type" to load
#module_flags="flags" # passes "flags" to the module
#module_before="cmd" # executes "cmd" before loading the module
#module_after="cmd" # executes "cmd" after loading the module
#module_error="cmd" # executes "cmd" if load fails
Reference in New Issue View Git Blame Copy Permalink