freebsd/usr.bin/file/magic.5

.\"
.\" $FreeBSD$
.\"
.\" install as magic.4 on USG, magic.5 on V7 or Berkeley systems.
.\"
.Dd February 19, 2006
.Dt MAGIC 5 "Public Domain"
.Os
.Sh NAME
.Nm magic
.Nd file command's magic number file
.Sh DESCRIPTION
This manual page documents the format of the magic file as
used by the
.Nm
command, version 4.17.
The
.Nm file
command identifies the type of a file using,
among other tests,
a test for whether the file begins with a certain
.Em "magic number" .
The file
.Pa /usr/share/misc/magic
specifies what magic numbers are to be tested for,
what message to print if a particular magic number is found,
and additional information to extract from the file.
.Pp
Each line of the file specifies a test to be performed.
A test compares the data starting at a particular offset
in the file with a 1-byte, 2-byte, or 4-byte numeric value or
a string.
If the test succeeds, a message is printed.
The line consists of the following fields:
.Bl -tag -width indent
.It offset
A number specifying the offset, in bytes, into the file of the data
which is to be tested.
.It type
The type of the data to be tested.
The possible values are:
.Bl -tag -width indent
.It byte
A one-byte value.
.It short
A two-byte value (on most systems) in this machine's native byte order.
.It long
A four-byte value (on most systems) in this machine's native byte order.
.It string
A string of bytes.
The string type specification can be optionally followed
by /[Bbc]*.
The
.Dq B
flag compacts whitespace in the target, which must contain
at least one whitespace character.
If the magic has
.Ar n
consecutive blanks, the target needs at least
.Ar n
consecutive blanks to match.
The
.Dq b
flag treats every blank in the target as an optional blank.
Finally the
.Dq c
flag, specifies case insensitive matching: lowercase characters
in the magic match both lower and upper case characters in the
targer, whereas upper case characters in the magic, only much
uppercase characters in the target.
.It pstring
A pascal style string where the first byte is interpreted as the an
unsigned length.
The string is not
.Dv NUL
terminated.
.It date
A four-byte value interpreted as a
.Ux
date.
.It ldate
A four-byte value interpreted as a
.Ux Ns -style
date, but interpreted as
local time rather than UTC.
.It beshort
A two-byte value (on most systems) in big-endian byte order.
.It belong
A four-byte value (on most systems) in big-endian byte order.
.It bedate
A four-byte value (on most systems) in big-endian byte order,
interpreted as a
.Ux
date.
.It beldate
A four-byte value (on most systems) in big-endian byte order,
interpreted as a
.Ux Ns -style
date, but interpreted as local time rather
than UTC.
.It bestring16
A two-byte unicode (UCS16) string in big-endian byte order.
.It leshort
A two-byte value (on most systems) in little-endian byte order.
.It lelong
A four-byte value (on most systems) in little-endian byte order.
.It ledate
A four-byte value (on most systems) in little-endian byte order,
interpreted as a
.Ux
date.
.It leldate
A four-byte value (on most systems) in little-endian byte order,
interpreted as a
.Ux Ns -style
date, but interpreted as local time rather
than UTC.
.It lestring16
A two-byte unicode (UCS16) string in little-endian byte order.
.It melong
A four-byte value (on most systems) in middle-endian (PDP-11) byte order.
.It medate
A four-byte value (on most systems) in middle-endian (PDP-11) byte order,
interpreted as a
.Ux
date.
.It meldate
A four-byte value (on most systems) in middle-endian (PDP-11) byte order,
interpreted as a
.Ux Ns -style
date, but interpreted as local time rather
than UTC.
.It regex
A regular expression match in extended
.Tn POSIX
regular expression syntax
(much like egrep).
The type specification can be optionally followed by
.Ql /c
for case-insensitive matches.
The regular expression is always
tested against the first
.Ar N
lines, where
.Ar N
is the given offset, thus it
is only useful for (single-byte encoded) text.
.Ql ^
and
.Ql $
will match the beginning and end of individual lines, respectively,
not beginning and end of file.
.It search
A literal string search starting at the given offset.
It must be followed by
.Li / Ns Aq Ar number
which specifies how many matches shall be attempted (the range).
This is suitable for searching larger binary expressions with variable
offsets, using
.Ql \e
escapes for special characters.
.El
.El
.Pp
The numeric types may optionally be followed by
.Em &
and a numeric value,
to specify that the value is to be AND'ed with the
numeric value before any comparisons are done.
Prepending a
.Em u
to the type indicates that ordered comparisons should be unsigned.
.Bl -tag -width indent
.It test
The value to be compared with the value from the file.
If the type is
numeric, this value
is specified in C form; if it is a string, it is specified as a C string
with the usual escapes permitted (e.g.\& \en for new-line).
.It ""
Numeric values
may be preceded by a character indicating the operation to be performed.
It may be
.Em = ,
to specify that the value from the file must equal the specified value,
.Em < ,
to specify that the value from the file must be less than the specified
value,
.Em > ,
to specify that the value from the file must be greater than the specified
value,
.Em & ,
to specify that the value from the file must have set all of the bits
that are set in the specified value,
.Em ^ ,
to specify that the value from the file must have clear any of the bits
that are set in the specified value, or
.Em ~ ,
the value specified after is negated before tested, or
.Em x ,
to specify that any value will match.
If the character is omitted,
it is assumed to be
.Em = .
For all tests except
.Dq string
and
.Dq regex ,
operation
.Em !\&
specifies that the line matches if the test does
.Em not
succeed.
.It ""
Numeric values are specified in C form; e.g.\&
.Em 13
is decimal,
.Em 013
is octal, and
.Em 0x13
is hexadecimal.
.It ""
For string values, the byte string from the
file must match the specified byte string.
The operators
.Em = ,
.Em <
and
.Em >
(but not
.Em & )
can be applied to strings.
The length used for matching is that of the string argument
in the magic file.
This means that a line can match any string, and
then presumably print that string, by doing
.Em >\e0
(because all strings are greater than the null string).
.It message
The message to be printed if the comparison succeeds.
If the string
contains a
.Xr printf 3
format specification, the value from the file (with any specified masking
performed) is printed using the message as the format string.
.El
.Pp
Some file formats contain additional information which is to be printed
along with the file type or need additional tests to determine the true
file type.
These additional tests are introduced by one or more
.Em >
characters preceding the offset.
The number of
.Em >
on the line indicates the level of the test; a line with no
.Em >
at the beginning is considered to be at level 0.
Tests are arranged in a tree-like hierarchy:
If a the test on a line at level
.Em n
succeeds, all following tests at level
.Em n+1
are performed, and the messages printed if the tests succeed, until a line
with level
.Em n
(or less) appears.
For more complex files, one can use empty messages to get just the
"if/then" effect, in the following way:
.Bd -literal -offset indent
0      string   MZ
>0x18  leshort  <0x40   MS-DOS executable
>0x18  leshort  >0x3f   extended PC executable (e.g., MS Windows)
.Ed
.Pp
Offsets do not need to be constant, but can also be read from the file
being examined.
If the first character following the last
.Em >
is a
.Em \&(
then the string after the parenthesis is interpreted as an indirect offset.
That means that the number after the parenthesis is used as an offset in
the file.
The value at that offset is read, and is used again as an offset
in the file.
Indirect offsets are of the form:
.Em (x[.[bslBSL]][+\-][y]) .
The value of
.Em x
is used as an offset in the file.
A byte, short or long is read at that offset
depending on the
.Em [bslBSLm]
type specifier.
The capitalized types interpret the number as a big endian value, whereas
a small letter versions interpret the number as a little endian value;
the
.Em m
type interprets the number as a middle endian (PDP-11) value.
To that number the value of
.Em y
is added and the result is used as an offset in the file.
The default type
if one is not specified is long.
.Pp
That way variable length structures can be examined:
.Bd -literal -offset indent
# MS Windows executables are also valid MS-DOS executables
0           string  MZ
>0x18       leshort <0x40   MZ executable (MS-DOS)
# skip the whole block below if it is not an extended executable
>0x18       leshort >0x3f
>>(0x3c.l)  string  PE\e0\e0  PE executable (MS-Windows)
>>(0x3c.l)  string  LX\e0\e0  LX executable (OS/2)
.Ed
.Pp
This strategy of examining has one drawback: You must make sure that
you eventually print something, or users may get empty output (like, when
there is neither PE\e0\e0 nor LE\e0\e0 in the above example).
.Pp
If this indirect offset cannot be used as-is, there are simple calculations
possible: appending
.Em [+-*/%&|^]<number>
inside parentheses allows one to modify
the value read from the file before it is used as an offset:
.Bd -literal -offset indent
# MS Windows executables are also valid MS-DOS executables
0           string  MZ
# sometimes, the value at 0x18 is less that 0x40 but there's still an
# extended executable, simply appended to the file
>0x18       leshort <0x40
>>(4.s*512) leshort 0x014c  COFF executable (MS-DOS, DJGPP)
>>(4.s*512) leshort !0x014c MZ executable (MS-DOS)
.Ed
.Pp
Sometimes you do not know the exact offset as this depends on the length or
position (when indirection was used before) of preceding fields.
You can
specify an offset relative to the end of the last uplevel field using
.Em &
as a prefix to the offset:
.Bd -literal -offset indent
0           string  MZ
>0x18       leshort >0x3f
>>(0x3c.l)  string  PE\e0\e0    PE executable (MS-Windows)
# immediately following the PE signature is the CPU type
>>>&0       leshort 0x14c     for Intel 80386
>>>&0       leshort 0x184     for DEC Alpha
.Ed
.Pp
Indirect and relative offsets can be combined:
.Bd -literal -offset indent
0             string  MZ
>0x18         leshort <0x40
>>(4.s*512)   leshort !0x014c MZ executable (MS-DOS)
# if it's not COFF, go back 512 bytes and add the offset taken
# from byte 2/3, which is yet another way of finding the start
# of the extended executable
>>>&(2.s-514) string  LE      LE executable (MS Windows VxD driver)
.Ed
.Pp
Or the other way around:
.Bd -literal -offset indent
0                 string  MZ
>0x18             leshort >0x3f
>>(0x3c.l)        string  LE\e0\e0  LE executable (MS-Windows)
# at offset 0x80 (-4, since relative offsets start at the end
# of the uplevel match) inside the LE header, we find the absolute
# offset to the code area, where we look for a specific signature
>>>(&0x7c.l+0x26) string  UPX     \eb, UPX compressed
.Ed
.Pp
Or even both!
.Bd -literal -offset indent
0                string  MZ
>0x18            leshort >0x3f
>>(0x3c.l)       string  LE\e0\e0 LE executable (MS-Windows)
# at offset 0x58 inside the LE header, we find the relative offset
# to a data area where we look for a specific signature
>>>&(&0x54.l-3)  string  UNACE  \eb, ACE self-extracting archive
.Ed
.Pp
Finally, if you have to deal with offset/length pairs in your file, even the
second value in a parenthesed expression can be taken from the file itself,
using another set of parentheses.
Note that this additional indirect offset
is always relative to the start of the main indirect offset.
.Bd -literal -offset indent
0                 string       MZ
>0x18             leshort      >0x3f
>>(0x3c.l)        string       PE\e0\e0 PE executable (MS-Windows)
# search for the PE section called ".idata"...
>>>&0xf4          search/0x140 .idata
# ...and go to the end of it, calculated from start+length;
# these are located 14 and 10 bytes after the section name
>>>>(&0xe.l+(-4)) string       PK\e3\e4 \eb, ZIP self-extracting archive
.Ed
.Sh BUGS
The formats
.Em long ,
.Em belong ,
.Em lelong ,
.Em melong ,
.Em short ,
.Em beshort ,
.Em leshort ,
.Em date ,
.Em bedate ,
.Em medate ,
.Em ledate ,
.Em beldate ,
.Em leldate ,
and
.Em meldate
are system-dependent; perhaps they should be specified as a number
of bytes (2B, 4B, etc),
since the files being recognized typically come from
a system on which the lengths are invariant.
.Pp
If
.Pa /usr/share/misc/magic
is newer than
.Pa /usr/share/misc/magic.mgc
it is not used.
Use the command:
.Dq Li "cd /usr/share/misc && file -C -m magic"
to rebuild.
.Sh SEE ALSO
.Xr file 1
.\"
.\" From: guy@sun.uucp (Guy Harris)
.\" Newsgroups: net.bugs.usg
.\" Subject: /etc/magic's format isn't well documented
.\" Message-ID: <2752@sun.uucp>
.\" Date: 3 Sep 85 08:19:07 GMT
.\" Organization: Sun Microsystems, Inc.
.\" Lines: 136
.\"
.\" Here's a manual page for the format accepted by the "file" made by adding
.\" the changes I posted to the S5R2 version.
.\"
.\" Modified for Ian Darwin's version of the file command.
.\" @(#)$Id: magic.man,v 1.30 2006/02/19 18:16:03 christos Exp $