mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-24 11:29:10 +00:00
1397 lines
34 KiB
C
1397 lines
34 KiB
C
/*
|
|
* Copyright (c) 1997,1998 Maxim Bolotin and Oleg Sharoiko.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice unmodified, this list of conditions, and the following
|
|
* disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* $FreeBSD$
|
|
*
|
|
* Device driver for Crystal Semiconductor CS8920 based ethernet
|
|
* adapters. By Maxim Bolotin and Oleg Sharoiko, 27-April-1997
|
|
*/
|
|
|
|
/* #define CS_DEBUG */
|
|
#include "cs.h"
|
|
#include "bpf.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/syslog.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_media.h>
|
|
#include <net/ethernet.h>
|
|
|
|
#if NBPF > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
|
|
#include <machine/clock.h>
|
|
|
|
#include <i386/isa/isa_device.h>
|
|
#include <i386/isa/if_csreg.h>
|
|
|
|
#include "pnp.h"
|
|
|
|
#if NPNP > 0
|
|
#include <i386/isa/pnp.h>
|
|
#endif
|
|
|
|
#ifdef CS_USE_64K_DMA
|
|
#define CS_DMA_BUFFER_SIZE 65536
|
|
#else
|
|
#define CS_DMA_BUFFER_SIZE 16384
|
|
#endif
|
|
|
|
/*
|
|
* cs_softc: per line info and status
|
|
*/
|
|
static struct cs_softc {
|
|
|
|
/* Ethernet common code */
|
|
struct arpcom arpcom;
|
|
|
|
/* Configuration words from EEPROM */
|
|
int auto_neg_cnf; /* AutoNegotitation configuration */
|
|
int adapter_cnf; /* Adapter configuration */
|
|
int isa_config; /* ISA configuration */
|
|
int chip_type; /* Type of chip */
|
|
|
|
struct ifmedia media; /* Media information */
|
|
|
|
int nic_addr; /* Base IO address of card */
|
|
int send_cmd;
|
|
int line_ctl; /* */
|
|
int send_underrun;
|
|
void *recv_ring;
|
|
|
|
unsigned char *buffer;
|
|
int buf_len;
|
|
|
|
} cs_softc[NCS];
|
|
|
|
#if NPNP > 0
|
|
static u_long cs_unit = NCS;
|
|
#endif
|
|
|
|
static int cs_recv_delay = 570;
|
|
SYSCTL_INT(_machdep, OID_AUTO, cs_recv_delay, CTLFLAG_RW, &cs_recv_delay, 0, "");
|
|
|
|
static int cs_attach __P((struct cs_softc *, int, int));
|
|
static int cs_attach_isa __P((struct isa_device *));
|
|
static void cs_init __P((void *));
|
|
static ointhand2_t csintr;
|
|
static int cs_ioctl __P((struct ifnet *, u_long, caddr_t));
|
|
static int cs_probe __P((struct isa_device *));
|
|
static int cs_cs89x0_probe __P((struct cs_softc *,
|
|
u_int *, int *, int, int, int));
|
|
static void cs_start __P((struct ifnet *));
|
|
static void cs_stop __P((struct cs_softc *));
|
|
static void cs_reset __P((struct cs_softc *));
|
|
static void cs_watchdog __P((struct ifnet *));
|
|
|
|
static int cs_mediachange __P((struct ifnet *));
|
|
static void cs_mediastatus __P((struct ifnet *, struct ifmediareq *));
|
|
static int cs_mediaset __P((struct cs_softc *, int));
|
|
|
|
static void cs_write_mbufs(struct cs_softc*, struct mbuf*);
|
|
static void cs_xmit_buf(struct cs_softc*);
|
|
static int cs_get_packet(struct cs_softc*);
|
|
static void cs_setmode(struct cs_softc*);
|
|
|
|
static int get_eeprom_data(struct cs_softc *sc, int, int, int *);
|
|
static int get_eeprom_cksum(int, int, int *);
|
|
static int wait_eeprom_ready( struct cs_softc *);
|
|
static void control_dc_dc( struct cs_softc *, int );
|
|
static int send_test_pkt( struct cs_softc * );
|
|
static int enable_tp(struct cs_softc *);
|
|
static int enable_aui(struct cs_softc *);
|
|
static int enable_bnc(struct cs_softc *);
|
|
static int cs_duplex_auto(struct cs_softc *);
|
|
|
|
struct isa_driver csdriver = {
|
|
cs_probe,
|
|
cs_attach_isa,
|
|
CS_NAME,
|
|
0
|
|
};
|
|
|
|
static int
|
|
get_eeprom_data( struct cs_softc *sc, int off, int len, int *buffer)
|
|
{
|
|
int i;
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME":EEPROM data from %x for %x:\n", off,len);
|
|
#endif
|
|
|
|
for (i=0;i<len;i++) {
|
|
if (wait_eeprom_ready(sc) < 0) return -1;
|
|
/* Send command to EEPROM to read */
|
|
cs_writereg(sc->nic_addr, PP_EECMD, (off+i)|EEPROM_READ_CMD );
|
|
if (wait_eeprom_ready(sc)<0)
|
|
return -1;
|
|
buffer[i] = cs_readreg (sc->nic_addr, PP_EEData);
|
|
|
|
#ifdef CS_DEBUG
|
|
printf("%02x %02x ",(unsigned char)buffer[i],
|
|
(unsigned char)buffer[i+1]);
|
|
#endif
|
|
}
|
|
|
|
#ifdef CS_DEBUG
|
|
printf("\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
get_eeprom_cksum(int off, int len, int *buffer)
|
|
{
|
|
int i,cksum=0;
|
|
|
|
for (i=0;i<len;i++)
|
|
cksum+=buffer[i];
|
|
cksum &= 0xffff;
|
|
if (cksum==0)
|
|
return 0;
|
|
return -1;
|
|
}
|
|
|
|
static int
|
|
wait_eeprom_ready(struct cs_softc *sc)
|
|
{
|
|
DELAY ( 30000 ); /* XXX should we do some checks here ? */
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
control_dc_dc(struct cs_softc *sc, int on_not_off)
|
|
{
|
|
unsigned int self_control = HCB1_ENBL;
|
|
|
|
if (((sc->adapter_cnf & A_CNF_DC_DC_POLARITY)!=0) ^ on_not_off)
|
|
self_control |= HCB1;
|
|
else
|
|
self_control &= ~HCB1;
|
|
cs_writereg( sc->nic_addr, PP_SelfCTL, self_control );
|
|
|
|
DELAY( 500000 );
|
|
}
|
|
|
|
|
|
static int
|
|
cs_duplex_auto(struct cs_softc *sc)
|
|
{
|
|
int i, error=0, unit=sc->arpcom.ac_if.if_unit;
|
|
|
|
cs_writereg(sc->nic_addr, PP_AutoNegCTL,
|
|
RE_NEG_NOW | ALLOW_FDX | AUTO_NEG_ENABLE );
|
|
for (i=0; cs_readreg(sc->nic_addr,PP_AutoNegST)&AUTO_NEG_BUSY; i++) {
|
|
if (i > 40000) {
|
|
printf(CS_NAME"%1d: full/half duplex "
|
|
"auto negotiation timeout\n", unit);
|
|
error = ETIMEDOUT;
|
|
break;
|
|
}
|
|
DELAY(1000);
|
|
}
|
|
DELAY( 1000000 );
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
enable_tp(struct cs_softc *sc)
|
|
{
|
|
int unit = sc->arpcom.ac_if.if_unit;
|
|
|
|
cs_writereg(sc->nic_addr, PP_LineCTL, sc->line_ctl & ~AUI_ONLY);
|
|
control_dc_dc(sc, 0);
|
|
DELAY( 150000 );
|
|
|
|
if ((cs_readreg(sc->nic_addr, PP_LineST) & LINK_OK)==0) {
|
|
printf(CS_NAME"%1d: failed to enable TP\n", unit);
|
|
return EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* XXX This was rewritten from Linux driver without any tests.
|
|
*/
|
|
static int
|
|
send_test_pkt(struct cs_softc *sc)
|
|
{
|
|
char test_packet[] = { 0,0,0,0,0,0, 0,0,0,0,0,0,
|
|
0, 46, /* A 46 in network order */
|
|
0, 0, /* DSAP=0 & SSAP=0 fields */
|
|
0xf3, 0 /* Control (Test Req + P bit set) */ };
|
|
int i;
|
|
u_char ether_address_backup[ETHER_ADDR_LEN];
|
|
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
ether_address_backup[i] = sc->arpcom.ac_enaddr[i];
|
|
}
|
|
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg(sc->nic_addr, PP_LineCTL) | SERIAL_TX_ON );
|
|
bcopy(test_packet,
|
|
sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
bcopy(test_packet+ETHER_ADDR_LEN,
|
|
sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
outw(sc->nic_addr + TX_CMD_PORT, sc->send_cmd);
|
|
outw(sc->nic_addr + TX_LEN_PORT, sizeof(test_packet));
|
|
|
|
/* Wait for chip to allocate memory */
|
|
DELAY(50000);
|
|
if (!(cs_readreg(sc->nic_addr, PP_BusST) & READY_FOR_TX_NOW)) {
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
sc->arpcom.ac_enaddr[i] = ether_address_backup[i];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
outsw(sc->nic_addr + TX_FRAME_PORT, test_packet, sizeof(test_packet));
|
|
|
|
DELAY(30000);
|
|
|
|
if ((cs_readreg(sc->nic_addr,PP_TxEvent) & TX_SEND_OK_BITS) == TX_OK) {
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
sc->arpcom.ac_enaddr[i] = ether_address_backup[i];
|
|
}
|
|
return 1;
|
|
}
|
|
for (i = 0; i < ETHER_ADDR_LEN; i++) {
|
|
sc->arpcom.ac_enaddr[i] = ether_address_backup[i];
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* XXX This was rewritten from Linux driver without any tests.
|
|
*/
|
|
static int
|
|
enable_aui(struct cs_softc *sc)
|
|
{
|
|
int unit = sc->arpcom.ac_if.if_unit;
|
|
|
|
control_dc_dc(sc, 0);
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
(sc->line_ctl & ~AUTO_AUI_10BASET) | AUI_ONLY);
|
|
|
|
if (!send_test_pkt(sc)) {
|
|
printf(CS_NAME"%1d failed to enable AUI\n", unit);
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* XXX This was rewritten from Linux driver without any tests.
|
|
*/
|
|
static int
|
|
enable_bnc(struct cs_softc *sc)
|
|
{
|
|
int unit = sc->arpcom.ac_if.if_unit;
|
|
|
|
control_dc_dc(sc, 1);
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
(sc->line_ctl & ~AUTO_AUI_10BASET) | AUI_ONLY);
|
|
|
|
if (!send_test_pkt(sc)) {
|
|
printf(CS_NAME"%1d failed to enable BNC\n", unit);
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
cs_cs89x0_probe(struct cs_softc *sc, u_int *dev_irq,
|
|
int *dev_drq, int iobase, int unit, int flags)
|
|
{
|
|
unsigned rev_type = 0;
|
|
int i, irq=0;
|
|
int eeprom_buff[CHKSUM_LEN];
|
|
int chip_type, pp_isaint, pp_isadma;
|
|
char chip_revision;
|
|
|
|
if ((inw(iobase+ADD_PORT) & ADD_MASK) != ADD_SIG) {
|
|
/* Chip not detected. Let's try to reset it */
|
|
if (bootverbose)
|
|
printf(CS_NAME"%1d: trying to reset the chip.\n", unit);
|
|
outw(iobase+ADD_PORT, PP_SelfCTL);
|
|
i = inw(iobase+DATA_PORT);
|
|
outw(iobase+ADD_PORT, PP_SelfCTL);
|
|
outw(iobase+DATA_PORT, i | POWER_ON_RESET);
|
|
if ((inw(iobase+ADD_PORT) & ADD_MASK) != ADD_SIG)
|
|
return 0;
|
|
}
|
|
|
|
outw(iobase+ADD_PORT, PP_ChipID);
|
|
if (inw(iobase+DATA_PORT) != CHIP_EISA_ID_SIG)
|
|
return 0;
|
|
|
|
rev_type = cs_readreg(iobase, PRODUCT_ID_ADD);
|
|
chip_type = rev_type & ~REVISON_BITS;
|
|
chip_revision = ((rev_type & REVISON_BITS) >> 8) + 'A';
|
|
|
|
sc->nic_addr = iobase;
|
|
sc->chip_type = chip_type;
|
|
if(chip_type==CS8900) {
|
|
pp_isaint = PP_CS8900_ISAINT;
|
|
pp_isadma = PP_CS8900_ISADMA;
|
|
sc->send_cmd = TX_CS8900_AFTER_ALL;
|
|
} else {
|
|
pp_isaint = PP_CS8920_ISAINT;
|
|
pp_isadma = PP_CS8920_ISADMA;
|
|
sc->send_cmd = TX_CS8920_AFTER_ALL;
|
|
}
|
|
|
|
/*
|
|
* Clear some fields so that fail of EEPROM will left them clean
|
|
*/
|
|
sc->auto_neg_cnf = 0;
|
|
sc->adapter_cnf = 0;
|
|
sc->isa_config = 0;
|
|
|
|
/*
|
|
* EEPROM
|
|
*/
|
|
if((cs_readreg(iobase, PP_SelfST) & EEPROM_PRESENT) == 0) {
|
|
printf(CS_NAME"%1d: No EEPROM, assuming defaults.\n",
|
|
unit);
|
|
} else {
|
|
if (get_eeprom_data(sc,START_EEPROM_DATA,CHKSUM_LEN, eeprom_buff)<0) {
|
|
printf(CS_NAME"%1d: EEPROM read failed, "
|
|
"assuming defaults..\n", unit);
|
|
} else {
|
|
if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN, eeprom_buff)<0) {
|
|
printf( CS_NAME"%1d: EEPROM cheksum bad, "
|
|
"assuming defaults..\n", unit );
|
|
} else {
|
|
sc->auto_neg_cnf =
|
|
eeprom_buff[AUTO_NEG_CNF_OFFSET/2];
|
|
sc->adapter_cnf =
|
|
eeprom_buff[ADAPTER_CNF_OFFSET/2];
|
|
sc->isa_config =
|
|
eeprom_buff[ISA_CNF_OFFSET/2];
|
|
|
|
for (i=0; i<ETHER_ADDR_LEN/2; i++) {
|
|
sc->arpcom.ac_enaddr[i*2]=
|
|
eeprom_buff[i];
|
|
sc->arpcom.ac_enaddr[i*2+1]=
|
|
eeprom_buff[i] >> 8;
|
|
}
|
|
|
|
/*
|
|
* If no interrupt specified (or "?"),
|
|
* use what the board tells us.
|
|
*/
|
|
if (*dev_irq <= 0) {
|
|
irq = sc->isa_config & INT_NO_MASK;
|
|
if (chip_type==CS8900) {
|
|
switch(irq) {
|
|
case 0: irq=10; break;
|
|
case 1: irq=11; break;
|
|
case 2: irq=12; break;
|
|
case 3: irq=5; break;
|
|
default: printf(CS_NAME"%1d: invalid irq in EEPROM.\n",unit);
|
|
}
|
|
if (irq!=0)
|
|
*dev_irq=(u_short)(1<<irq);
|
|
} else {
|
|
if (irq!=0 && irq<=CS8920_NO_INTS)
|
|
*dev_irq=(u_short)(1<<irq);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((irq=ffs(*dev_irq))) {
|
|
irq--;
|
|
if (chip_type == CS8900) {
|
|
switch(irq) {
|
|
case 5: irq = 3; break;
|
|
case 10: irq = 0; break;
|
|
case 11: irq = 1; break;
|
|
case 12: irq = 2; break;
|
|
default: printf(CS_NAME"%1d: invalid irq\n", unit);
|
|
return 0;
|
|
}
|
|
} else {
|
|
if (irq > CS8920_NO_INTS) {
|
|
printf(CS_NAME"%1d: invalid irq\n", unit);
|
|
return 0;
|
|
}
|
|
}
|
|
cs_writereg(iobase, pp_isaint, irq);
|
|
} else {
|
|
printf(CS_NAME"%1d: invalid irq\n", unit);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Temporary disabled
|
|
*
|
|
if (drq>0)
|
|
cs_writereg(iobase, pp_isadma, drq);
|
|
else {
|
|
printf( CS_NAME"%1d: incorrect drq\n", unit );
|
|
return 0;
|
|
}
|
|
*/
|
|
|
|
if (bootverbose)
|
|
printf(CS_NAME"%1d: model CS89%c0%s rev %c\n"
|
|
CS_NAME"%1d: media%s%s%s\n"
|
|
CS_NAME"%1d: irq %d drq %d\n",
|
|
unit,
|
|
chip_type==CS8900 ? '0' : '2',
|
|
chip_type==CS8920M ? "M" : "",
|
|
chip_revision,
|
|
unit,
|
|
(sc->adapter_cnf & A_CNF_10B_T) ? " TP" : "",
|
|
(sc->adapter_cnf & A_CNF_AUI) ? " AUI" : "",
|
|
(sc->adapter_cnf & A_CNF_10B_2) ? " BNC" : "",
|
|
unit, (int)*dev_irq, (int)*dev_drq);
|
|
|
|
if ((sc->adapter_cnf & A_CNF_EXTND_10B_2) &&
|
|
(sc->adapter_cnf & A_CNF_LOW_RX_SQUELCH))
|
|
sc->line_ctl = LOW_RX_SQUELCH;
|
|
else
|
|
sc->line_ctl = 0;
|
|
|
|
|
|
return PP_ISAIOB;
|
|
}
|
|
|
|
/*
|
|
* Determine if the device is present
|
|
*
|
|
* on entry:
|
|
* a pointer to an isa_device struct
|
|
* on exit:
|
|
* NULL if device not found
|
|
* or # of i/o addresses used (if found)
|
|
*/
|
|
static int
|
|
cs_probe(struct isa_device *dev)
|
|
{
|
|
int nports;
|
|
|
|
struct cs_softc *sc=&cs_softc[dev->id_unit];
|
|
|
|
nports=cs_cs89x0_probe(sc, &(dev->id_irq), &(dev->id_drq),
|
|
(dev->id_iobase), (dev->id_unit), (dev->id_flags));
|
|
|
|
if (nports)
|
|
return (nports);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Install the interface into kernel networking data structures
|
|
*/
|
|
static int
|
|
cs_attach(struct cs_softc *sc, int unit, int flags)
|
|
{
|
|
int media=0;
|
|
/* struct cs_softc *sc = &cs_softc[dev->id_unit]; */
|
|
struct ifnet *ifp = &(sc->arpcom.ac_if);
|
|
|
|
if (!ifp->if_name) {
|
|
ifp->if_softc=sc;
|
|
ifp->if_unit=unit;
|
|
ifp->if_name=csdriver.name;
|
|
ifp->if_output=ether_output;
|
|
ifp->if_start=cs_start;
|
|
ifp->if_ioctl=cs_ioctl;
|
|
ifp->if_watchdog=cs_watchdog;
|
|
ifp->if_init=cs_init;
|
|
ifp->if_snd.ifq_maxlen= IFQ_MAXLEN;
|
|
/*
|
|
* MIB DATA
|
|
*/
|
|
/*
|
|
ifp->if_linkmib=&sc->mibdata;
|
|
ifp->if_linkmiblen=sizeof sc->mibdata;
|
|
*/
|
|
|
|
ifp->if_flags=(IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST );
|
|
|
|
/*
|
|
* this code still in progress (DMA support)
|
|
*
|
|
|
|
sc->recv_ring=malloc(CS_DMA_BUFFER_SIZE<<1, M_DEVBUF, M_NOWAIT);
|
|
if (sc->recv_ring == NULL) {
|
|
log(LOG_ERR,CS_NAME
|
|
"%d: Couldn't allocate memory for NIC\n", unit);
|
|
return(0);
|
|
}
|
|
if ((sc->recv_ring-(sc->recv_ring & 0x1FFFF))
|
|
< (128*1024-CS_DMA_BUFFER_SIZE))
|
|
sc->recv_ring+=16*1024;
|
|
|
|
*/
|
|
|
|
sc->buffer=malloc(ETHER_MAX_LEN-ETHER_CRC_LEN,M_DEVBUF,M_NOWAIT);
|
|
if (sc->buffer == NULL) {
|
|
printf(CS_NAME"%d: Couldn't allocate memory for NIC\n",
|
|
unit);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the media structures.
|
|
*/
|
|
ifmedia_init(&sc->media, 0, cs_mediachange, cs_mediastatus);
|
|
|
|
if (sc->adapter_cnf & A_CNF_10B_T) {
|
|
ifmedia_add(&sc->media, IFM_ETHER|IFM_10_T, 0, NULL);
|
|
if (sc->chip_type != CS8900) {
|
|
ifmedia_add(&sc->media,
|
|
IFM_ETHER|IFM_10_T|IFM_FDX, 0, NULL);
|
|
ifmedia_add(&sc->media,
|
|
IFM_ETHER|IFM_10_T|IFM_HDX, 0, NULL);
|
|
}
|
|
}
|
|
|
|
if (sc->adapter_cnf & A_CNF_10B_2)
|
|
ifmedia_add(&sc->media, IFM_ETHER|IFM_10_2, 0, NULL);
|
|
|
|
if (sc->adapter_cnf & A_CNF_AUI)
|
|
ifmedia_add(&sc->media, IFM_ETHER|IFM_10_5, 0, NULL);
|
|
|
|
if (sc->adapter_cnf & A_CNF_MEDIA)
|
|
ifmedia_add(&sc->media, IFM_ETHER|IFM_AUTO, 0, NULL);
|
|
|
|
/* Set default media from EEPROM */
|
|
switch (sc->adapter_cnf & A_CNF_MEDIA_TYPE) {
|
|
case A_CNF_MEDIA_AUTO: media = IFM_ETHER|IFM_AUTO; break;
|
|
case A_CNF_MEDIA_10B_T: media = IFM_ETHER|IFM_10_T; break;
|
|
case A_CNF_MEDIA_10B_2: media = IFM_ETHER|IFM_10_2; break;
|
|
case A_CNF_MEDIA_AUI: media = IFM_ETHER|IFM_10_5; break;
|
|
default: printf(CS_NAME"%d: adapter has no media\n", unit);
|
|
}
|
|
ifmedia_set(&sc->media, media);
|
|
cs_mediaset(sc, media);
|
|
|
|
if_attach(ifp);
|
|
cs_stop( sc );
|
|
ether_ifattach(ifp);
|
|
}
|
|
|
|
if (bootverbose)
|
|
printf(CS_NAME"%d: ethernet address %6D\n",
|
|
ifp->if_unit, sc->arpcom.ac_enaddr, ":");
|
|
|
|
#if NBPF > 0
|
|
bpfattach(ifp, DLT_EN10MB, sizeof (struct ether_header));
|
|
#endif
|
|
return 1;
|
|
}
|
|
|
|
static int
|
|
cs_attach_isa(struct isa_device *dev)
|
|
{
|
|
int unit=dev->id_unit;
|
|
struct cs_softc *sc=&cs_softc[unit];
|
|
int flags=dev->id_flags;
|
|
|
|
dev->id_ointr = csintr;
|
|
return cs_attach(sc, unit, flags);
|
|
}
|
|
|
|
/*
|
|
* Initialize the board
|
|
*/
|
|
static void
|
|
cs_init(void *xsc)
|
|
{
|
|
struct cs_softc *sc=(struct cs_softc *)xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
int i, s, rx_cfg;
|
|
|
|
/* address not known */
|
|
if (TAILQ_EMPTY(&ifp->if_addrhead)) /* unlikely? XXX */
|
|
return;
|
|
|
|
/*
|
|
* reset whatchdog timer
|
|
*/
|
|
ifp->if_timer=0;
|
|
sc->buf_len = 0;
|
|
|
|
s=splimp();
|
|
|
|
/*
|
|
* Hardware initialization of cs
|
|
*/
|
|
|
|
/* Enable receiver and transmitter */
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg( sc->nic_addr, PP_LineCTL ) |
|
|
SERIAL_RX_ON | SERIAL_TX_ON);
|
|
|
|
/* Configure the receiver mode */
|
|
cs_setmode(sc);
|
|
|
|
/*
|
|
* This defines what type of frames will cause interrupts
|
|
* Bad frames should generate interrupts so that the driver
|
|
* could track statistics of discarded packets
|
|
*/
|
|
rx_cfg = RX_OK_ENBL | RX_CRC_ERROR_ENBL | RX_RUNT_ENBL |
|
|
RX_EXTRA_DATA_ENBL;
|
|
if (sc->isa_config & STREAM_TRANSFER)
|
|
rx_cfg |= RX_STREAM_ENBL;
|
|
cs_writereg(sc->nic_addr, PP_RxCFG, rx_cfg);
|
|
|
|
cs_writereg(sc->nic_addr, PP_TxCFG, TX_LOST_CRS_ENBL |
|
|
TX_SQE_ERROR_ENBL | TX_OK_ENBL | TX_LATE_COL_ENBL |
|
|
TX_JBR_ENBL | TX_ANY_COL_ENBL | TX_16_COL_ENBL);
|
|
|
|
cs_writereg(sc->nic_addr, PP_BufCFG, READY_FOR_TX_ENBL |
|
|
RX_MISS_COUNT_OVRFLOW_ENBL | TX_COL_COUNT_OVRFLOW_ENBL |
|
|
TX_UNDERRUN_ENBL /*| RX_DMA_ENBL*/);
|
|
|
|
/* Write MAC address into IA filter */
|
|
for (i=0; i<ETHER_ADDR_LEN/2; i++)
|
|
cs_writereg(sc->nic_addr, PP_IA+i*2,
|
|
sc->arpcom.ac_enaddr[i*2] |
|
|
(sc->arpcom.ac_enaddr[i*2+1] << 8) );
|
|
|
|
/*
|
|
* Now enable everything
|
|
*/
|
|
/*
|
|
#ifdef CS_USE_64K_DMA
|
|
cs_writereg(sc->nic_addr, PP_BusCTL, ENABLE_IRQ | RX_DMA_SIZE_64K);
|
|
#else
|
|
|
|
cs_writereg(sc->nic_addr, PP_BusCTL, ENABLE_IRQ);
|
|
#endif
|
|
*/
|
|
cs_writereg(sc->nic_addr, PP_BusCTL, ENABLE_IRQ);
|
|
|
|
/*
|
|
* Set running and clear output active flags
|
|
*/
|
|
sc->arpcom.ac_if.if_flags |= IFF_RUNNING;
|
|
sc->arpcom.ac_if.if_flags &= ~IFF_OACTIVE;
|
|
|
|
/*
|
|
* Start sending process
|
|
*/
|
|
cs_start(ifp);
|
|
|
|
(void) splx(s);
|
|
}
|
|
|
|
/*
|
|
* Get the packet from the board and send it to the upper layer
|
|
* via ether_input().
|
|
*/
|
|
static int
|
|
cs_get_packet(struct cs_softc *sc)
|
|
{
|
|
struct ifnet *ifp = &(sc->arpcom.ac_if);
|
|
int iobase = sc->nic_addr, status, length;
|
|
struct ether_header *eh;
|
|
struct mbuf *m;
|
|
|
|
#ifdef CS_DEBUG
|
|
int i;
|
|
#endif
|
|
|
|
status = inw(iobase + RX_FRAME_PORT);
|
|
length = inw(iobase + RX_FRAME_PORT);
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%1d: rcvd: stat %x, len %d\n",
|
|
ifp->if_unit, status, length);
|
|
#endif
|
|
|
|
if (!(status & RX_OK)) {
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%1d: bad pkt stat %x\n", ifp->if_unit, status);
|
|
#endif
|
|
ifp->if_ierrors++;
|
|
return -1;
|
|
}
|
|
|
|
MGETHDR(m, M_DONTWAIT, MT_DATA);
|
|
if (m==NULL)
|
|
return -1;
|
|
|
|
if (length > MHLEN) {
|
|
MCLGET(m, M_DONTWAIT);
|
|
if (!(m->m_flags & M_EXT)) {
|
|
m_freem(m);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
/* Initialize packet's header info */
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_pkthdr.len = length;
|
|
m->m_len = length;
|
|
|
|
/* Get the data */
|
|
insw(iobase + RX_FRAME_PORT, m->m_data, (length+1)>>1);
|
|
|
|
eh = mtod(m, struct ether_header *);
|
|
|
|
#if NBPF > 0
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, m);
|
|
#endif
|
|
|
|
#ifdef CS_DEBUG
|
|
for (i=0;i<length;i++)
|
|
printf(" %02x",(unsigned char)*((char *)(m->m_data+i)));
|
|
printf( "\n" );
|
|
#endif
|
|
|
|
if (status & (RX_IA | RX_BROADCAST) ||
|
|
(ifp->if_flags & IFF_MULTICAST && status & RX_HASHED)) {
|
|
m->m_pkthdr.len -= sizeof(struct ether_header);
|
|
m->m_len -= sizeof(struct ether_header);
|
|
m->m_data += sizeof(struct ether_header);
|
|
|
|
/* Feed the packet to the upper layer */
|
|
ether_input(ifp, eh, m);
|
|
|
|
ifp->if_ipackets++;
|
|
|
|
if (length==ETHER_MAX_LEN-ETHER_CRC_LEN)
|
|
DELAY( cs_recv_delay );
|
|
} else {
|
|
m_freem(m);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Software calls interrupt handler
|
|
*/
|
|
static void
|
|
csintr_sc(struct cs_softc *sc, int unit)
|
|
{
|
|
struct ifnet *ifp = &(sc->arpcom.ac_if);
|
|
int status;
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%1d: Interrupt.\n", unit);
|
|
#endif
|
|
|
|
while ((status=cs_readword(sc->nic_addr, ISQ_PORT))) {
|
|
|
|
#ifdef CS_DEBUG
|
|
printf( CS_NAME"%1d:from ISQ: %04x\n", unit, status );
|
|
#endif
|
|
|
|
switch (status & ISQ_EVENT_MASK) {
|
|
case ISQ_RECEIVER_EVENT:
|
|
cs_get_packet(sc);
|
|
break;
|
|
|
|
case ISQ_TRANSMITTER_EVENT:
|
|
if (status & TX_OK)
|
|
ifp->if_opackets++;
|
|
else
|
|
ifp->if_oerrors++;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
break;
|
|
|
|
case ISQ_BUFFER_EVENT:
|
|
if (status & READY_FOR_TX) {
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
if (status & TX_UNDERRUN) {
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
ifp->if_timer = 0;
|
|
ifp->if_oerrors++;
|
|
}
|
|
break;
|
|
|
|
case ISQ_RX_MISS_EVENT:
|
|
ifp->if_ierrors+=(status>>6);
|
|
break;
|
|
|
|
case ISQ_TX_COL_EVENT:
|
|
ifp->if_collisions+=(status>>6);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (!(ifp->if_flags & IFF_OACTIVE)) {
|
|
cs_start(ifp);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Handle interrupts
|
|
*/
|
|
static void
|
|
csintr(int unit)
|
|
{
|
|
struct cs_softc *sc = &cs_softc[unit];
|
|
|
|
csintr_sc(sc, unit);
|
|
}
|
|
|
|
/*
|
|
* Save the data in buffer
|
|
*/
|
|
|
|
static void
|
|
cs_write_mbufs( struct cs_softc *sc, struct mbuf *m )
|
|
{
|
|
int len;
|
|
struct mbuf *mp;
|
|
unsigned char *data, *buf;
|
|
|
|
for (mp=m, buf=sc->buffer, sc->buf_len=0; mp != NULL; mp=mp->m_next) {
|
|
len = mp->m_len;
|
|
|
|
/*
|
|
* Ignore empty parts
|
|
*/
|
|
if (!len)
|
|
continue;
|
|
|
|
/*
|
|
* Find actual data address
|
|
*/
|
|
data = mtod(mp, caddr_t);
|
|
|
|
bcopy((caddr_t) data, (caddr_t) buf, len);
|
|
buf += len;
|
|
sc->buf_len += len;
|
|
}
|
|
}
|
|
|
|
|
|
static void
|
|
cs_xmit_buf( struct cs_softc *sc )
|
|
{
|
|
outsw(sc->nic_addr+TX_FRAME_PORT, sc->buffer, (sc->buf_len+1)>>1);
|
|
sc->buf_len = 0;
|
|
}
|
|
|
|
static void
|
|
cs_start(struct ifnet *ifp)
|
|
{
|
|
int s, length;
|
|
struct mbuf *m, *mp;
|
|
struct cs_softc *sc = ifp->if_softc;
|
|
|
|
s = splimp();
|
|
|
|
for (;;) {
|
|
if (sc->buf_len)
|
|
length = sc->buf_len;
|
|
else {
|
|
IF_DEQUEUE( &ifp->if_snd, m );
|
|
|
|
if (m==NULL) {
|
|
(void) splx(s);
|
|
return;
|
|
}
|
|
|
|
for (length=0, mp=m; mp != NULL; mp=mp->m_next)
|
|
length += mp->m_len;
|
|
|
|
/* Skip zero-length packets */
|
|
if (length == 0) {
|
|
m_freem(m);
|
|
continue;
|
|
}
|
|
|
|
cs_write_mbufs(sc, m);
|
|
|
|
#if NBPF > 0
|
|
if (ifp->if_bpf) {
|
|
bpf_mtap(ifp, m);
|
|
}
|
|
#endif
|
|
|
|
m_freem(m);
|
|
}
|
|
|
|
/*
|
|
* Issue a SEND command
|
|
*/
|
|
outw(sc->nic_addr+TX_CMD_PORT, sc->send_cmd);
|
|
outw(sc->nic_addr+TX_LEN_PORT, length );
|
|
|
|
/*
|
|
* If there's no free space in the buffer then leave
|
|
* this packet for the next time: indicate output active
|
|
* and return.
|
|
*/
|
|
if (!(cs_readreg(sc->nic_addr, PP_BusST) & READY_FOR_TX_NOW)) {
|
|
ifp->if_timer = sc->buf_len;
|
|
(void) splx(s);
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
return;
|
|
}
|
|
|
|
cs_xmit_buf(sc);
|
|
|
|
/*
|
|
* Set the watchdog timer in case we never hear
|
|
* from board again. (I don't know about correct
|
|
* value for this timeout)
|
|
*/
|
|
ifp->if_timer = length;
|
|
|
|
(void) splx(s);
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
return;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Stop everything on the interface
|
|
*/
|
|
static void
|
|
cs_stop(struct cs_softc *sc)
|
|
{
|
|
int s = splimp();
|
|
|
|
cs_writereg(sc->nic_addr, PP_RxCFG, 0);
|
|
cs_writereg(sc->nic_addr, PP_TxCFG, 0);
|
|
cs_writereg(sc->nic_addr, PP_BufCFG, 0);
|
|
cs_writereg(sc->nic_addr, PP_BusCTL, 0);
|
|
|
|
sc->arpcom.ac_if.if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
sc->arpcom.ac_if.if_timer = 0;
|
|
|
|
(void) splx(s);
|
|
}
|
|
|
|
/*
|
|
* Reset the interface
|
|
*/
|
|
static void
|
|
cs_reset(struct cs_softc *sc)
|
|
{
|
|
cs_stop(sc);
|
|
cs_init(sc);
|
|
}
|
|
|
|
static void
|
|
cs_setmode(struct cs_softc *sc)
|
|
{
|
|
struct ifnet *ifp = &(sc->arpcom.ac_if);
|
|
int rx_ctl;
|
|
|
|
/* Stop the receiver while changing filters */
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg(sc->nic_addr, PP_LineCTL) & ~SERIAL_RX_ON);
|
|
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
/* Turn on promiscuous mode. */
|
|
rx_ctl = RX_OK_ACCEPT | RX_PROM_ACCEPT;
|
|
} else {
|
|
if (ifp->if_flags & IFF_MULTICAST) {
|
|
/* Allow receiving frames with multicast addresses */
|
|
rx_ctl = RX_IA_ACCEPT | RX_BROADCAST_ACCEPT |
|
|
RX_OK_ACCEPT | RX_MULTCAST_ACCEPT;
|
|
/*
|
|
* Here the reconfiguration of chip's multicast
|
|
* filters should be done but I've no idea about
|
|
* hash transformation in this chip. If you can
|
|
* add this code or describe me the transformation
|
|
* I'd be very glad.
|
|
*/
|
|
} else {
|
|
/*
|
|
* Receive only good frames addressed for us and
|
|
* good broadcasts.
|
|
*/
|
|
rx_ctl = RX_IA_ACCEPT | RX_BROADCAST_ACCEPT |
|
|
RX_OK_ACCEPT;
|
|
}
|
|
}
|
|
|
|
/* Set up the filter */
|
|
cs_writereg(sc->nic_addr, PP_RxCTL, RX_DEF_ACCEPT | rx_ctl);
|
|
|
|
/* Turn on receiver */
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg(sc->nic_addr, PP_LineCTL) | SERIAL_RX_ON);
|
|
}
|
|
|
|
static int
|
|
cs_ioctl(register struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
struct cs_softc *sc=ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int s,error=0;
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%d: ioctl(%x)\n",sc->arpcom.ac_if.if_unit,command);
|
|
#endif
|
|
|
|
s=splimp();
|
|
|
|
switch (command) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
ether_ioctl(ifp, command, data);
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
/*
|
|
* Switch interface state between "running" and
|
|
* "stopped", reflecting the UP flag.
|
|
*/
|
|
if (sc->arpcom.ac_if.if_flags & IFF_UP) {
|
|
if ((sc->arpcom.ac_if.if_flags & IFF_RUNNING)==0) {
|
|
cs_init(sc);
|
|
}
|
|
} else {
|
|
if ((sc->arpcom.ac_if.if_flags & IFF_RUNNING)!=0) {
|
|
cs_stop(sc);
|
|
}
|
|
}
|
|
/*
|
|
* Promiscuous and/or multicast flags may have changed,
|
|
* so reprogram the multicast filter and/or receive mode.
|
|
*
|
|
* See note about multicasts in cs_setmode
|
|
*/
|
|
cs_setmode(sc);
|
|
break;
|
|
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
/*
|
|
* Multicast list has changed; set the hardware filter
|
|
* accordingly.
|
|
*
|
|
* See note about multicasts in cs_setmode
|
|
*/
|
|
cs_setmode(sc);
|
|
error = 0;
|
|
break;
|
|
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
error = ifmedia_ioctl(ifp, ifr, &sc->media, command);
|
|
break;
|
|
|
|
default:
|
|
error = EINVAL;
|
|
}
|
|
|
|
(void) splx(s);
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Device timeout/watchdog routine. Entered if the device neglects to
|
|
* generate an interrupt after a transmit has been started on it.
|
|
*/
|
|
static void
|
|
cs_watchdog(struct ifnet *ifp)
|
|
{
|
|
struct cs_softc *sc = &cs_softc[ifp->if_unit];
|
|
|
|
ifp->if_oerrors++;
|
|
log(LOG_ERR, CS_NAME"%d: device timeout\n", ifp->if_unit);
|
|
|
|
/* Reset the interface */
|
|
if (ifp->if_flags & IFF_UP)
|
|
cs_reset(sc);
|
|
else
|
|
cs_stop(sc);
|
|
}
|
|
|
|
static int
|
|
cs_mediachange(struct ifnet *ifp)
|
|
{
|
|
struct cs_softc *sc = ifp->if_softc;
|
|
struct ifmedia *ifm = &sc->media;
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return EINVAL;
|
|
|
|
return cs_mediaset(sc, ifm->ifm_media);
|
|
}
|
|
|
|
static void
|
|
cs_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
int line_status;
|
|
struct cs_softc *sc = ifp->if_softc;
|
|
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
line_status = cs_readreg(sc->nic_addr, PP_LineST);
|
|
if (line_status & TENBASET_ON) {
|
|
ifmr->ifm_active |= IFM_10_T;
|
|
if (sc->chip_type != CS8900) {
|
|
if (cs_readreg(sc->nic_addr, PP_AutoNegST) & FDX_ACTIVE)
|
|
ifmr->ifm_active |= IFM_FDX;
|
|
if (cs_readreg(sc->nic_addr, PP_AutoNegST) & HDX_ACTIVE)
|
|
ifmr->ifm_active |= IFM_HDX;
|
|
}
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
if (line_status & LINK_OK)
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
} else {
|
|
if (line_status & AUI_ON) {
|
|
cs_writereg(sc->nic_addr, PP_SelfCTL,
|
|
cs_readreg(sc->nic_addr, PP_SelfCTL) |
|
|
HCB1_ENBL);
|
|
if (((sc->adapter_cnf & A_CNF_DC_DC_POLARITY)!=0)^
|
|
(cs_readreg(sc->nic_addr, PP_SelfCTL)&HCB1))
|
|
ifmr->ifm_active |= IFM_10_2;
|
|
else
|
|
ifmr->ifm_active |= IFM_10_5;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
cs_mediaset(struct cs_softc *sc, int media)
|
|
{
|
|
int error;
|
|
|
|
/* Stop the receiver & transmitter */
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg(sc->nic_addr, PP_LineCTL) &
|
|
~(SERIAL_RX_ON | SERIAL_TX_ON));
|
|
|
|
#ifdef CS_DEBUG
|
|
printf(CS_NAME"%d: cs_setmedia(%x)\n",sc->arpcom.ac_if.if_unit,media);
|
|
#endif
|
|
|
|
switch (IFM_SUBTYPE(media)) {
|
|
default:
|
|
case IFM_AUTO:
|
|
if ((error=enable_tp(sc))==0)
|
|
error = cs_duplex_auto(sc);
|
|
else if ((error=enable_bnc(sc)) != 0)
|
|
error = enable_aui(sc);
|
|
break;
|
|
case IFM_10_T:
|
|
if ((error=enable_tp(sc)) != 0)
|
|
break;
|
|
if (media & IFM_FDX)
|
|
cs_duplex_full(sc);
|
|
else if (media & IFM_HDX)
|
|
cs_duplex_half(sc);
|
|
else
|
|
error = cs_duplex_auto(sc);
|
|
break;
|
|
case IFM_10_2:
|
|
error = enable_bnc(sc);
|
|
break;
|
|
case IFM_10_5:
|
|
error = enable_aui(sc);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Turn the transmitter & receiver back on
|
|
*/
|
|
cs_writereg(sc->nic_addr, PP_LineCTL,
|
|
cs_readreg( sc->nic_addr, PP_LineCTL ) |
|
|
SERIAL_RX_ON | SERIAL_TX_ON);
|
|
|
|
return error;
|
|
}
|
|
|
|
|
|
#if NPNP > 0
|
|
|
|
static struct cspnp_ids {
|
|
u_long vend_id;
|
|
char *id_str;
|
|
} cspnp_ids[]= {
|
|
{ 0x4060630e, "CSC6040" },
|
|
{ 0x10104d24, "IBM EtherJet" },
|
|
{ 0 }
|
|
};
|
|
|
|
static char *cs_pnp_probe(u_long, u_long);
|
|
static void cs_pnp_attach(u_long, u_long, char *, struct isa_device *);
|
|
|
|
struct pnp_device cs_pnp = {
|
|
"CS8920 based PnP Ethernet",
|
|
cs_pnp_probe,
|
|
cs_pnp_attach,
|
|
&cs_unit,
|
|
&net_imask /* imask */
|
|
};
|
|
|
|
DATA_SET (pnpdevice_set, cs_pnp);
|
|
|
|
struct csintr_list {
|
|
struct cs_softc *sc;
|
|
int unit;
|
|
struct csintr_list *next;
|
|
};
|
|
|
|
static struct csintr_list *csintr_head;
|
|
|
|
static void csintr_pnp_add(struct cs_softc *sc, int unit);
|
|
static void csintr_pnp(int unit);
|
|
|
|
static void
|
|
csintr_pnp_add(struct cs_softc *sc, int unit)
|
|
{
|
|
struct csintr_list *intr;
|
|
|
|
if (!sc) return;
|
|
|
|
intr = malloc (sizeof (*intr), M_DEVBUF, M_WAITOK);
|
|
if (!intr) return;
|
|
|
|
intr->sc = sc;
|
|
intr->unit = unit;
|
|
intr->next = csintr_head;
|
|
csintr_head = intr;
|
|
}
|
|
|
|
/*
|
|
* Interrupt handler for PNP installed card
|
|
* We have to find the number of the card.
|
|
*/
|
|
static void
|
|
csintr_pnp(int unit)
|
|
{
|
|
struct csintr_list *intr;
|
|
|
|
for (intr=csintr_head; intr; intr=intr->next) {
|
|
if (intr->unit == unit)
|
|
csintr_sc(intr->sc, unit);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static char *
|
|
cs_pnp_probe(u_long csn, u_long vend_id)
|
|
{
|
|
struct cspnp_ids *ids;
|
|
char *s=NULL;
|
|
|
|
for(ids = cspnp_ids; ids->vend_id != 0; ids++) {
|
|
if (vend_id == ids->vend_id) {
|
|
s = ids->id_str;
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (s) {
|
|
struct pnp_cinfo d;
|
|
int ldn = 0;
|
|
|
|
read_pnp_parms(&d, ldn);
|
|
if (d.enable == 0) {
|
|
printf("This is a %s, but LDN %d is disabled\n", s, ldn);
|
|
return NULL ;
|
|
}
|
|
return s;
|
|
}
|
|
|
|
return NULL ;
|
|
}
|
|
|
|
static void
|
|
cs_pnp_attach(u_long csn, u_long vend_id, char *name,
|
|
struct isa_device *dev)
|
|
{
|
|
|
|
struct pnp_cinfo d;
|
|
int ldn = 0;
|
|
int iobase, unit, flags;
|
|
u_int irq;
|
|
int drq;
|
|
struct cs_softc *sc = malloc(sizeof *sc, M_DEVBUF, M_NOWAIT);
|
|
|
|
if (read_pnp_parms ( &d , ldn ) == 0 ) {
|
|
printf("failed to read pnp parms\n");
|
|
return;
|
|
}
|
|
|
|
write_pnp_parms( &d, ldn );
|
|
enable_pnp_card();
|
|
|
|
iobase = dev->id_iobase = d.port[0];
|
|
irq = dev->id_irq = (1 << d.irq[0] );
|
|
drq = dev->id_drq = d.drq[0];
|
|
dev->id_maddr = 0;
|
|
dev->id_ointr = csintr_pnp;
|
|
flags = dev->id_flags = 0;
|
|
unit = dev->id_unit;
|
|
|
|
if (dev->id_driver == NULL) {
|
|
dev->id_driver = &csdriver;
|
|
dev->id_id = isa_compat_nextid();
|
|
}
|
|
|
|
if (!sc) return;
|
|
|
|
bzero(sc, sizeof *sc);
|
|
if (cs_cs89x0_probe(sc, &irq, &drq, iobase, unit, flags) == 0
|
|
|| cs_attach(sc, unit, flags) == 0) {
|
|
free(sc, M_DEVBUF);
|
|
} else {
|
|
if ((irq != dev->id_irq)
|
|
|| (drq != dev->id_drq)
|
|
|| (iobase != dev->id_iobase)
|
|
|| (unit != dev->id_unit)
|
|
|| (flags != dev->id_flags)
|
|
) {
|
|
printf("failed to pnp card parametars\n");
|
|
}
|
|
}
|
|
csintr_pnp_add(sc, dev->id_unit);
|
|
}
|
|
#endif /* NPNP */
|