mirror of
https://git.FreeBSD.org/src.git
synced 2024-12-25 11:37:56 +00:00
569d8f7e27
PR: kern/147237 (based on the initial patch for 8.x) Tested by: glebius (device detection and suspend/resume) MFC after: 1 month
3428 lines
98 KiB
C
3428 lines
98 KiB
C
/**
|
|
** Copyright (c) 1995 Michael Smith, All rights reserved.
|
|
**
|
|
** Redistribution and use in source and binary forms, with or without
|
|
** modification, are permitted provided that the following conditions
|
|
** are met:
|
|
** 1. Redistributions of source code must retain the above copyright
|
|
** notice, this list of conditions and the following disclaimer as
|
|
** the first lines of this file unmodified.
|
|
** 2. Redistributions in binary form must reproduce the above copyright
|
|
** notice, this list of conditions and the following disclaimer in the
|
|
** documentation and/or other materials provided with the distribution.
|
|
** 3. All advertising materials mentioning features or use of this software
|
|
** must display the following acknowledgment:
|
|
** This product includes software developed by Michael Smith.
|
|
** 4. The name of the author may not be used to endorse or promote products
|
|
** derived from this software without specific prior written permission.
|
|
**
|
|
**
|
|
** THIS SOFTWARE IS PROVIDED BY Michael Smith ``AS IS'' AND ANY
|
|
** EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
** PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL Michael Smith BE LIABLE FOR
|
|
** ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
** CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
** SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
** BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
** WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
|
|
** OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
|
|
** EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
**
|
|
**/
|
|
|
|
/**
|
|
** MOUSED.C
|
|
**
|
|
** Mouse daemon : listens to a serial port, the bus mouse interface, or
|
|
** the PS/2 mouse port for mouse data stream, interprets data and passes
|
|
** ioctls off to the console driver.
|
|
**
|
|
** The mouse interface functions are derived closely from the mouse
|
|
** handler in the XFree86 X server. Many thanks to the XFree86 people
|
|
** for their great work!
|
|
**
|
|
**/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/consio.h>
|
|
#include <sys/mouse.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/stat.h>
|
|
#include <sys/time.h>
|
|
#include <sys/un.h>
|
|
|
|
#include <ctype.h>
|
|
#include <err.h>
|
|
#include <errno.h>
|
|
#include <fcntl.h>
|
|
#include <libutil.h>
|
|
#include <limits.h>
|
|
#include <setjmp.h>
|
|
#include <signal.h>
|
|
#include <stdarg.h>
|
|
#include <stdint.h>
|
|
#include <stdio.h>
|
|
#include <stdlib.h>
|
|
#include <string.h>
|
|
#include <syslog.h>
|
|
#include <termios.h>
|
|
#include <unistd.h>
|
|
#include <math.h>
|
|
|
|
#define MAX_CLICKTHRESHOLD 2000 /* 2 seconds */
|
|
#define MAX_BUTTON2TIMEOUT 2000 /* 2 seconds */
|
|
#define DFLT_CLICKTHRESHOLD 500 /* 0.5 second */
|
|
#define DFLT_BUTTON2TIMEOUT 100 /* 0.1 second */
|
|
#define DFLT_SCROLLTHRESHOLD 3 /* 3 pixels */
|
|
#define DFLT_SCROLLSPEED 2 /* 2 pixels */
|
|
|
|
/* Abort 3-button emulation delay after this many movement events. */
|
|
#define BUTTON2_MAXMOVE 3
|
|
|
|
#define TRUE 1
|
|
#define FALSE 0
|
|
|
|
#define MOUSE_XAXIS (-1)
|
|
#define MOUSE_YAXIS (-2)
|
|
|
|
/* Logitech PS2++ protocol */
|
|
#define MOUSE_PS2PLUS_CHECKBITS(b) \
|
|
((((b[2] & 0x03) << 2) | 0x02) == (b[1] & 0x0f))
|
|
#define MOUSE_PS2PLUS_PACKET_TYPE(b) \
|
|
(((b[0] & 0x30) >> 2) | ((b[1] & 0x30) >> 4))
|
|
|
|
#define ChordMiddle 0x0001
|
|
#define Emulate3Button 0x0002
|
|
#define ClearDTR 0x0004
|
|
#define ClearRTS 0x0008
|
|
#define NoPnP 0x0010
|
|
#define VirtualScroll 0x0020
|
|
#define HVirtualScroll 0x0040
|
|
#define ExponentialAcc 0x0080
|
|
|
|
#define ID_NONE 0
|
|
#define ID_PORT 1
|
|
#define ID_IF 2
|
|
#define ID_TYPE 4
|
|
#define ID_MODEL 8
|
|
#define ID_ALL (ID_PORT | ID_IF | ID_TYPE | ID_MODEL)
|
|
|
|
/* Operations on timespecs */
|
|
#define tsclr(tvp) ((tvp)->tv_sec = (tvp)->tv_nsec = 0)
|
|
#define tscmp(tvp, uvp, cmp) \
|
|
(((tvp)->tv_sec == (uvp)->tv_sec) ? \
|
|
((tvp)->tv_nsec cmp (uvp)->tv_nsec) : \
|
|
((tvp)->tv_sec cmp (uvp)->tv_sec))
|
|
#define tssub(tvp, uvp, vvp) \
|
|
do { \
|
|
(vvp)->tv_sec = (tvp)->tv_sec - (uvp)->tv_sec; \
|
|
(vvp)->tv_nsec = (tvp)->tv_nsec - (uvp)->tv_nsec; \
|
|
if ((vvp)->tv_nsec < 0) { \
|
|
(vvp)->tv_sec--; \
|
|
(vvp)->tv_nsec += 1000000000; \
|
|
} \
|
|
} while (0)
|
|
|
|
#define debug(...) do { \
|
|
if (debug && nodaemon) \
|
|
warnx(__VA_ARGS__); \
|
|
} while (0)
|
|
|
|
#define logerr(e, ...) do { \
|
|
log_or_warn(LOG_DAEMON | LOG_ERR, errno, __VA_ARGS__); \
|
|
exit(e); \
|
|
} while (0)
|
|
|
|
#define logerrx(e, ...) do { \
|
|
log_or_warn(LOG_DAEMON | LOG_ERR, 0, __VA_ARGS__); \
|
|
exit(e); \
|
|
} while (0)
|
|
|
|
#define logwarn(...) \
|
|
log_or_warn(LOG_DAEMON | LOG_WARNING, errno, __VA_ARGS__)
|
|
|
|
#define logwarnx(...) \
|
|
log_or_warn(LOG_DAEMON | LOG_WARNING, 0, __VA_ARGS__)
|
|
|
|
/* structures */
|
|
|
|
/* symbol table entry */
|
|
typedef struct {
|
|
const char *name;
|
|
int val;
|
|
int val2;
|
|
} symtab_t;
|
|
|
|
/* serial PnP ID string */
|
|
typedef struct {
|
|
int revision; /* PnP revision, 100 for 1.00 */
|
|
const char *eisaid; /* EISA ID including mfr ID and product ID */
|
|
char *serial; /* serial No, optional */
|
|
const char *class; /* device class, optional */
|
|
char *compat; /* list of compatible drivers, optional */
|
|
char *description; /* product description, optional */
|
|
int neisaid; /* length of the above fields... */
|
|
int nserial;
|
|
int nclass;
|
|
int ncompat;
|
|
int ndescription;
|
|
} pnpid_t;
|
|
|
|
/* global variables */
|
|
|
|
static int debug = 0;
|
|
static int nodaemon = FALSE;
|
|
static int background = FALSE;
|
|
static int paused = FALSE;
|
|
static int identify = ID_NONE;
|
|
static int extioctl = FALSE;
|
|
static const char *pidfile = "/var/run/moused.pid";
|
|
static struct pidfh *pfh;
|
|
|
|
#define SCROLL_NOTSCROLLING 0
|
|
#define SCROLL_PREPARE 1
|
|
#define SCROLL_SCROLLING 2
|
|
|
|
static int scroll_state;
|
|
static int scroll_movement;
|
|
static int hscroll_movement;
|
|
|
|
/* local variables */
|
|
|
|
/* interface (the table must be ordered by MOUSE_IF_XXX in mouse.h) */
|
|
static symtab_t rifs[] = {
|
|
{ "serial", MOUSE_IF_SERIAL, 0 },
|
|
{ "bus", MOUSE_IF_BUS, 0 },
|
|
{ "inport", MOUSE_IF_INPORT, 0 },
|
|
{ "ps/2", MOUSE_IF_PS2, 0 },
|
|
{ "sysmouse", MOUSE_IF_SYSMOUSE, 0 },
|
|
{ "usb", MOUSE_IF_USB, 0 },
|
|
{ NULL, MOUSE_IF_UNKNOWN, 0 },
|
|
};
|
|
|
|
/* types (the table must be ordered by MOUSE_PROTO_XXX in mouse.h) */
|
|
static const char *rnames[] = {
|
|
"microsoft",
|
|
"mousesystems",
|
|
"logitech",
|
|
"mmseries",
|
|
"mouseman",
|
|
"busmouse",
|
|
"inportmouse",
|
|
"ps/2",
|
|
"mmhitab",
|
|
"glidepoint",
|
|
"intellimouse",
|
|
"thinkingmouse",
|
|
"sysmouse",
|
|
"x10mouseremote",
|
|
"kidspad",
|
|
"versapad",
|
|
"jogdial",
|
|
#if notyet
|
|
"mariqua",
|
|
#endif
|
|
"gtco_digipad",
|
|
NULL
|
|
};
|
|
|
|
/* models */
|
|
static symtab_t rmodels[] = {
|
|
{ "NetScroll", MOUSE_MODEL_NETSCROLL, 0 },
|
|
{ "NetMouse/NetScroll Optical", MOUSE_MODEL_NET, 0 },
|
|
{ "GlidePoint", MOUSE_MODEL_GLIDEPOINT, 0 },
|
|
{ "ThinkingMouse", MOUSE_MODEL_THINK, 0 },
|
|
{ "IntelliMouse", MOUSE_MODEL_INTELLI, 0 },
|
|
{ "EasyScroll/SmartScroll", MOUSE_MODEL_EASYSCROLL, 0 },
|
|
{ "MouseMan+", MOUSE_MODEL_MOUSEMANPLUS, 0 },
|
|
{ "Kidspad", MOUSE_MODEL_KIDSPAD, 0 },
|
|
{ "VersaPad", MOUSE_MODEL_VERSAPAD, 0 },
|
|
{ "IntelliMouse Explorer", MOUSE_MODEL_EXPLORER, 0 },
|
|
{ "4D Mouse", MOUSE_MODEL_4D, 0 },
|
|
{ "4D+ Mouse", MOUSE_MODEL_4DPLUS, 0 },
|
|
{ "Synaptics Touchpad", MOUSE_MODEL_SYNAPTICS, 0 },
|
|
{ "TrackPoint", MOUSE_MODEL_TRACKPOINT, 0 },
|
|
{ "generic", MOUSE_MODEL_GENERIC, 0 },
|
|
{ NULL, MOUSE_MODEL_UNKNOWN, 0 },
|
|
};
|
|
|
|
/* PnP EISA/product IDs */
|
|
static symtab_t pnpprod[] = {
|
|
/* Kensignton ThinkingMouse */
|
|
{ "KML0001", MOUSE_PROTO_THINK, MOUSE_MODEL_THINK },
|
|
/* MS IntelliMouse */
|
|
{ "MSH0001", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
|
|
/* MS IntelliMouse TrackBall */
|
|
{ "MSH0004", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
|
|
/* Tremon Wheel Mouse MUSD */
|
|
{ "HTK0001", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
|
|
/* Genius PnP Mouse */
|
|
{ "KYE0001", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
|
|
/* MouseSystems SmartScroll Mouse (OEM from Genius?) */
|
|
{ "KYE0002", MOUSE_PROTO_MS, MOUSE_MODEL_EASYSCROLL },
|
|
/* Genius NetMouse */
|
|
{ "KYE0003", MOUSE_PROTO_INTELLI, MOUSE_MODEL_NET },
|
|
/* Genius Kidspad, Easypad and other tablets */
|
|
{ "KYE0005", MOUSE_PROTO_KIDSPAD, MOUSE_MODEL_KIDSPAD },
|
|
/* Genius EZScroll */
|
|
{ "KYEEZ00", MOUSE_PROTO_MS, MOUSE_MODEL_EASYSCROLL },
|
|
/* Logitech Cordless MouseMan Wheel */
|
|
{ "LGI8033", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
|
|
/* Logitech MouseMan (new 4 button model) */
|
|
{ "LGI800C", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
|
|
/* Logitech MouseMan+ */
|
|
{ "LGI8050", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
|
|
/* Logitech FirstMouse+ */
|
|
{ "LGI8051", MOUSE_PROTO_INTELLI, MOUSE_MODEL_MOUSEMANPLUS },
|
|
/* Logitech serial */
|
|
{ "LGI8001", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC },
|
|
/* A4 Tech 4D/4D+ Mouse */
|
|
{ "A4W0005", MOUSE_PROTO_INTELLI, MOUSE_MODEL_4D },
|
|
/* 8D Scroll Mouse */
|
|
{ "PEC9802", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
|
|
/* Mitsumi Wireless Scroll Mouse */
|
|
{ "MTM6401", MOUSE_PROTO_INTELLI, MOUSE_MODEL_INTELLI },
|
|
|
|
/* MS bus */
|
|
{ "PNP0F00", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
|
|
/* MS serial */
|
|
{ "PNP0F01", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
|
|
/* MS InPort */
|
|
{ "PNP0F02", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC },
|
|
/* MS PS/2 */
|
|
{ "PNP0F03", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
|
|
/*
|
|
* EzScroll returns PNP0F04 in the compatible device field; but it
|
|
* doesn't look compatible... XXX
|
|
*/
|
|
/* MouseSystems */
|
|
{ "PNP0F04", MOUSE_PROTO_MSC, MOUSE_MODEL_GENERIC },
|
|
/* MouseSystems */
|
|
{ "PNP0F05", MOUSE_PROTO_MSC, MOUSE_MODEL_GENERIC },
|
|
#if notyet
|
|
/* Genius Mouse */
|
|
{ "PNP0F06", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
/* Genius Mouse */
|
|
{ "PNP0F07", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
#endif
|
|
/* Logitech serial */
|
|
{ "PNP0F08", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC },
|
|
/* MS BallPoint serial */
|
|
{ "PNP0F09", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
|
|
/* MS PnP serial */
|
|
{ "PNP0F0A", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
|
|
/* MS PnP BallPoint serial */
|
|
{ "PNP0F0B", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
|
|
/* MS serial comatible */
|
|
{ "PNP0F0C", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
|
|
/* MS InPort comatible */
|
|
{ "PNP0F0D", MOUSE_PROTO_INPORT, MOUSE_MODEL_GENERIC },
|
|
/* MS PS/2 comatible */
|
|
{ "PNP0F0E", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
|
|
/* MS BallPoint comatible */
|
|
{ "PNP0F0F", MOUSE_PROTO_MS, MOUSE_MODEL_GENERIC },
|
|
#if notyet
|
|
/* TI QuickPort */
|
|
{ "PNP0F10", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
#endif
|
|
/* MS bus comatible */
|
|
{ "PNP0F11", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
|
|
/* Logitech PS/2 */
|
|
{ "PNP0F12", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
|
|
/* PS/2 */
|
|
{ "PNP0F13", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
|
|
#if notyet
|
|
/* MS Kids Mouse */
|
|
{ "PNP0F14", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
#endif
|
|
/* Logitech bus */
|
|
{ "PNP0F15", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
|
|
#if notyet
|
|
/* Logitech SWIFT */
|
|
{ "PNP0F16", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
#endif
|
|
/* Logitech serial compat */
|
|
{ "PNP0F17", MOUSE_PROTO_LOGIMOUSEMAN, MOUSE_MODEL_GENERIC },
|
|
/* Logitech bus compatible */
|
|
{ "PNP0F18", MOUSE_PROTO_BUS, MOUSE_MODEL_GENERIC },
|
|
/* Logitech PS/2 compatible */
|
|
{ "PNP0F19", MOUSE_PROTO_PS2, MOUSE_MODEL_GENERIC },
|
|
#if notyet
|
|
/* Logitech SWIFT compatible */
|
|
{ "PNP0F1A", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
/* HP Omnibook */
|
|
{ "PNP0F1B", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
/* Compaq LTE TrackBall PS/2 */
|
|
{ "PNP0F1C", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
/* Compaq LTE TrackBall serial */
|
|
{ "PNP0F1D", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
/* MS Kidts Trackball */
|
|
{ "PNP0F1E", MOUSE_PROTO_XXX, MOUSE_MODEL_GENERIC },
|
|
#endif
|
|
/* Interlink VersaPad */
|
|
{ "LNK0001", MOUSE_PROTO_VERSAPAD, MOUSE_MODEL_VERSAPAD },
|
|
|
|
{ NULL, MOUSE_PROTO_UNKNOWN, MOUSE_MODEL_GENERIC },
|
|
};
|
|
|
|
/* the table must be ordered by MOUSE_PROTO_XXX in mouse.h */
|
|
static unsigned short rodentcflags[] =
|
|
{
|
|
(CS7 | CREAD | CLOCAL | HUPCL), /* MicroSoft */
|
|
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* MouseSystems */
|
|
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* Logitech */
|
|
(CS8 | PARENB | PARODD | CREAD | CLOCAL | HUPCL), /* MMSeries */
|
|
(CS7 | CREAD | CLOCAL | HUPCL), /* MouseMan */
|
|
0, /* Bus */
|
|
0, /* InPort */
|
|
0, /* PS/2 */
|
|
(CS8 | CREAD | CLOCAL | HUPCL), /* MM HitTablet */
|
|
(CS7 | CREAD | CLOCAL | HUPCL), /* GlidePoint */
|
|
(CS7 | CREAD | CLOCAL | HUPCL), /* IntelliMouse */
|
|
(CS7 | CREAD | CLOCAL | HUPCL), /* Thinking Mouse */
|
|
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* sysmouse */
|
|
(CS7 | CREAD | CLOCAL | HUPCL), /* X10 MouseRemote */
|
|
(CS8 | PARENB | PARODD | CREAD | CLOCAL | HUPCL), /* kidspad etc. */
|
|
(CS8 | CREAD | CLOCAL | HUPCL), /* VersaPad */
|
|
0, /* JogDial */
|
|
#if notyet
|
|
(CS8 | CSTOPB | CREAD | CLOCAL | HUPCL), /* Mariqua */
|
|
#endif
|
|
(CS8 | CREAD | HUPCL ), /* GTCO Digi-Pad */
|
|
};
|
|
|
|
static struct rodentparam {
|
|
int flags;
|
|
const char *portname; /* /dev/XXX */
|
|
int rtype; /* MOUSE_PROTO_XXX */
|
|
int level; /* operation level: 0 or greater */
|
|
int baudrate;
|
|
int rate; /* report rate */
|
|
int resolution; /* MOUSE_RES_XXX or a positive number */
|
|
int zmap[4]; /* MOUSE_{X|Y}AXIS or a button number */
|
|
int wmode; /* wheel mode button number */
|
|
int mfd; /* mouse file descriptor */
|
|
int cfd; /* /dev/consolectl file descriptor */
|
|
int mremsfd; /* mouse remote server file descriptor */
|
|
int mremcfd; /* mouse remote client file descriptor */
|
|
int is_removable; /* set if device is removable, like USB */
|
|
long clickthreshold; /* double click speed in msec */
|
|
long button2timeout; /* 3 button emulation timeout */
|
|
mousehw_t hw; /* mouse device hardware information */
|
|
mousemode_t mode; /* protocol information */
|
|
float accelx; /* Acceleration in the X axis */
|
|
float accely; /* Acceleration in the Y axis */
|
|
float expoaccel; /* Exponential acceleration */
|
|
float expoffset; /* Movement offset for exponential accel. */
|
|
float remainx; /* Remainder on X and Y axis, respectively... */
|
|
float remainy; /* ... to compensate for rounding errors. */
|
|
int scrollthreshold; /* Movement distance before virtual scrolling */
|
|
int scrollspeed; /* Movement distance to rate of scrolling */
|
|
} rodent = {
|
|
.flags = 0,
|
|
.portname = NULL,
|
|
.rtype = MOUSE_PROTO_UNKNOWN,
|
|
.level = -1,
|
|
.baudrate = 1200,
|
|
.rate = 0,
|
|
.resolution = MOUSE_RES_UNKNOWN,
|
|
.zmap = { 0, 0, 0, 0 },
|
|
.wmode = 0,
|
|
.mfd = -1,
|
|
.cfd = -1,
|
|
.mremsfd = -1,
|
|
.mremcfd = -1,
|
|
.is_removable = 0,
|
|
.clickthreshold = DFLT_CLICKTHRESHOLD,
|
|
.button2timeout = DFLT_BUTTON2TIMEOUT,
|
|
.accelx = 1.0,
|
|
.accely = 1.0,
|
|
.expoaccel = 1.0,
|
|
.expoffset = 1.0,
|
|
.remainx = 0.0,
|
|
.remainy = 0.0,
|
|
.scrollthreshold = DFLT_SCROLLTHRESHOLD,
|
|
.scrollspeed = DFLT_SCROLLSPEED,
|
|
};
|
|
|
|
/* button status */
|
|
struct button_state {
|
|
int count; /* 0: up, 1: single click, 2: double click,... */
|
|
struct timespec ts; /* timestamp on the last button event */
|
|
};
|
|
static struct button_state bstate[MOUSE_MAXBUTTON]; /* button state */
|
|
static struct button_state *mstate[MOUSE_MAXBUTTON];/* mapped button st.*/
|
|
static struct button_state zstate[4]; /* Z/W axis state */
|
|
|
|
/* state machine for 3 button emulation */
|
|
|
|
#define S0 0 /* start */
|
|
#define S1 1 /* button 1 delayed down */
|
|
#define S2 2 /* button 3 delayed down */
|
|
#define S3 3 /* both buttons down -> button 2 down */
|
|
#define S4 4 /* button 1 delayed up */
|
|
#define S5 5 /* button 1 down */
|
|
#define S6 6 /* button 3 down */
|
|
#define S7 7 /* both buttons down */
|
|
#define S8 8 /* button 3 delayed up */
|
|
#define S9 9 /* button 1 or 3 up after S3 */
|
|
|
|
#define A(b1, b3) (((b1) ? 2 : 0) | ((b3) ? 1 : 0))
|
|
#define A_TIMEOUT 4
|
|
#define S_DELAYED(st) (states[st].s[A_TIMEOUT] != (st))
|
|
|
|
static struct {
|
|
int s[A_TIMEOUT + 1];
|
|
int buttons;
|
|
int mask;
|
|
int timeout;
|
|
} states[10] = {
|
|
/* S0 */
|
|
{ { S0, S2, S1, S3, S0 }, 0, ~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN), FALSE },
|
|
/* S1 */
|
|
{ { S4, S2, S1, S3, S5 }, 0, ~MOUSE_BUTTON1DOWN, FALSE },
|
|
/* S2 */
|
|
{ { S8, S2, S1, S3, S6 }, 0, ~MOUSE_BUTTON3DOWN, FALSE },
|
|
/* S3 */
|
|
{ { S0, S9, S9, S3, S3 }, MOUSE_BUTTON2DOWN, ~0, FALSE },
|
|
/* S4 */
|
|
{ { S0, S2, S1, S3, S0 }, MOUSE_BUTTON1DOWN, ~0, TRUE },
|
|
/* S5 */
|
|
{ { S0, S2, S5, S7, S5 }, MOUSE_BUTTON1DOWN, ~0, FALSE },
|
|
/* S6 */
|
|
{ { S0, S6, S1, S7, S6 }, MOUSE_BUTTON3DOWN, ~0, FALSE },
|
|
/* S7 */
|
|
{ { S0, S6, S5, S7, S7 }, MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN, ~0, FALSE },
|
|
/* S8 */
|
|
{ { S0, S2, S1, S3, S0 }, MOUSE_BUTTON3DOWN, ~0, TRUE },
|
|
/* S9 */
|
|
{ { S0, S9, S9, S3, S9 }, 0, ~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN), FALSE },
|
|
};
|
|
static int mouse_button_state;
|
|
static struct timespec mouse_button_state_ts;
|
|
static int mouse_move_delayed;
|
|
|
|
static jmp_buf env;
|
|
|
|
struct drift_xy {
|
|
int x;
|
|
int y;
|
|
};
|
|
static int drift_distance = 4; /* max steps X+Y */
|
|
static int drift_time = 500; /* in 0.5 sec */
|
|
static struct timespec drift_time_ts;
|
|
static struct timespec drift_2time_ts; /* 2*drift_time */
|
|
static int drift_after = 4000; /* 4 sec */
|
|
static struct timespec drift_after_ts;
|
|
static int drift_terminate = FALSE;
|
|
static struct timespec drift_current_ts;
|
|
static struct timespec drift_tmp;
|
|
static struct timespec drift_last_activity = {0, 0};
|
|
static struct timespec drift_since = {0, 0};
|
|
static struct drift_xy drift_last = {0, 0}; /* steps in last drift_time */
|
|
static struct drift_xy drift_previous = {0, 0}; /* steps in prev. drift_time */
|
|
|
|
/* function prototypes */
|
|
|
|
static void linacc(int, int, int*, int*);
|
|
static void expoacc(int, int, int*, int*);
|
|
static void moused(void);
|
|
static void hup(int sig);
|
|
static void cleanup(int sig);
|
|
static void pause_mouse(int sig);
|
|
static void usage(void);
|
|
static void log_or_warn(int log_pri, int errnum, const char *fmt, ...)
|
|
__printflike(3, 4);
|
|
|
|
static int r_identify(void);
|
|
static const char *r_if(int type);
|
|
static const char *r_name(int type);
|
|
static const char *r_model(int model);
|
|
static void r_init(void);
|
|
static int r_protocol(u_char b, mousestatus_t *act);
|
|
static int r_statetrans(mousestatus_t *a1, mousestatus_t *a2, int trans);
|
|
static int r_installmap(char *arg);
|
|
static void r_map(mousestatus_t *act1, mousestatus_t *act2);
|
|
static void r_timestamp(mousestatus_t *act);
|
|
static int r_timeout(void);
|
|
static void r_click(mousestatus_t *act);
|
|
static void setmousespeed(int old, int new, unsigned cflag);
|
|
|
|
static int pnpwakeup1(void);
|
|
static int pnpwakeup2(void);
|
|
static int pnpgets(char *buf);
|
|
static int pnpparse(pnpid_t *id, char *buf, int len);
|
|
static symtab_t *pnpproto(pnpid_t *id);
|
|
|
|
static symtab_t *gettoken(symtab_t *tab, const char *s, int len);
|
|
static const char *gettokenname(symtab_t *tab, int val);
|
|
|
|
static void mremote_serversetup(void);
|
|
static void mremote_clientchg(int add);
|
|
|
|
static int kidspad(u_char rxc, mousestatus_t *act);
|
|
static int gtco_digipad(u_char, mousestatus_t *);
|
|
|
|
int
|
|
main(int argc, char *argv[])
|
|
{
|
|
int c;
|
|
int i;
|
|
int j;
|
|
|
|
for (i = 0; i < MOUSE_MAXBUTTON; ++i)
|
|
mstate[i] = &bstate[i];
|
|
|
|
while ((c = getopt(argc, argv, "3A:C:DE:F:HI:L:PRS:T:VU:a:cdfhi:l:m:p:r:st:w:z:")) != -1)
|
|
switch(c) {
|
|
|
|
case '3':
|
|
rodent.flags |= Emulate3Button;
|
|
break;
|
|
|
|
case 'E':
|
|
rodent.button2timeout = atoi(optarg);
|
|
if ((rodent.button2timeout < 0) ||
|
|
(rodent.button2timeout > MAX_BUTTON2TIMEOUT)) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
break;
|
|
|
|
case 'a':
|
|
i = sscanf(optarg, "%f,%f", &rodent.accelx, &rodent.accely);
|
|
if (i == 0) {
|
|
warnx("invalid linear acceleration argument '%s'", optarg);
|
|
usage();
|
|
}
|
|
|
|
if (i == 1)
|
|
rodent.accely = rodent.accelx;
|
|
|
|
break;
|
|
|
|
case 'A':
|
|
rodent.flags |= ExponentialAcc;
|
|
i = sscanf(optarg, "%f,%f", &rodent.expoaccel, &rodent.expoffset);
|
|
if (i == 0) {
|
|
warnx("invalid exponential acceleration argument '%s'", optarg);
|
|
usage();
|
|
}
|
|
|
|
if (i == 1)
|
|
rodent.expoffset = 1.0;
|
|
|
|
break;
|
|
|
|
case 'c':
|
|
rodent.flags |= ChordMiddle;
|
|
break;
|
|
|
|
case 'd':
|
|
++debug;
|
|
break;
|
|
|
|
case 'f':
|
|
nodaemon = TRUE;
|
|
break;
|
|
|
|
case 'i':
|
|
if (strcmp(optarg, "all") == 0)
|
|
identify = ID_ALL;
|
|
else if (strcmp(optarg, "port") == 0)
|
|
identify = ID_PORT;
|
|
else if (strcmp(optarg, "if") == 0)
|
|
identify = ID_IF;
|
|
else if (strcmp(optarg, "type") == 0)
|
|
identify = ID_TYPE;
|
|
else if (strcmp(optarg, "model") == 0)
|
|
identify = ID_MODEL;
|
|
else {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
nodaemon = TRUE;
|
|
break;
|
|
|
|
case 'l':
|
|
rodent.level = atoi(optarg);
|
|
if ((rodent.level < 0) || (rodent.level > 4)) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
break;
|
|
|
|
case 'm':
|
|
if (!r_installmap(optarg)) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
break;
|
|
|
|
case 'p':
|
|
rodent.portname = optarg;
|
|
break;
|
|
|
|
case 'r':
|
|
if (strcmp(optarg, "high") == 0)
|
|
rodent.resolution = MOUSE_RES_HIGH;
|
|
else if (strcmp(optarg, "medium-high") == 0)
|
|
rodent.resolution = MOUSE_RES_HIGH;
|
|
else if (strcmp(optarg, "medium-low") == 0)
|
|
rodent.resolution = MOUSE_RES_MEDIUMLOW;
|
|
else if (strcmp(optarg, "low") == 0)
|
|
rodent.resolution = MOUSE_RES_LOW;
|
|
else if (strcmp(optarg, "default") == 0)
|
|
rodent.resolution = MOUSE_RES_DEFAULT;
|
|
else {
|
|
rodent.resolution = atoi(optarg);
|
|
if (rodent.resolution <= 0) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
}
|
|
break;
|
|
|
|
case 's':
|
|
rodent.baudrate = 9600;
|
|
break;
|
|
|
|
case 'w':
|
|
i = atoi(optarg);
|
|
if ((i <= 0) || (i > MOUSE_MAXBUTTON)) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
rodent.wmode = 1 << (i - 1);
|
|
break;
|
|
|
|
case 'z':
|
|
if (strcmp(optarg, "x") == 0)
|
|
rodent.zmap[0] = MOUSE_XAXIS;
|
|
else if (strcmp(optarg, "y") == 0)
|
|
rodent.zmap[0] = MOUSE_YAXIS;
|
|
else {
|
|
i = atoi(optarg);
|
|
/*
|
|
* Use button i for negative Z axis movement and
|
|
* button (i + 1) for positive Z axis movement.
|
|
*/
|
|
if ((i <= 0) || (i > MOUSE_MAXBUTTON - 1)) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
rodent.zmap[0] = i;
|
|
rodent.zmap[1] = i + 1;
|
|
debug("optind: %d, optarg: '%s'", optind, optarg);
|
|
for (j = 1; j < 4; ++j) {
|
|
if ((optind >= argc) || !isdigit(*argv[optind]))
|
|
break;
|
|
i = atoi(argv[optind]);
|
|
if ((i <= 0) || (i > MOUSE_MAXBUTTON - 1)) {
|
|
warnx("invalid argument `%s'", argv[optind]);
|
|
usage();
|
|
}
|
|
rodent.zmap[j] = i;
|
|
++optind;
|
|
}
|
|
if ((rodent.zmap[2] != 0) && (rodent.zmap[3] == 0))
|
|
rodent.zmap[3] = rodent.zmap[2] + 1;
|
|
}
|
|
break;
|
|
|
|
case 'C':
|
|
rodent.clickthreshold = atoi(optarg);
|
|
if ((rodent.clickthreshold < 0) ||
|
|
(rodent.clickthreshold > MAX_CLICKTHRESHOLD)) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
break;
|
|
|
|
case 'D':
|
|
rodent.flags |= ClearDTR;
|
|
break;
|
|
|
|
case 'F':
|
|
rodent.rate = atoi(optarg);
|
|
if (rodent.rate <= 0) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
break;
|
|
|
|
case 'H':
|
|
rodent.flags |= HVirtualScroll;
|
|
break;
|
|
|
|
case 'I':
|
|
pidfile = optarg;
|
|
break;
|
|
|
|
case 'L':
|
|
rodent.scrollspeed = atoi(optarg);
|
|
if (rodent.scrollspeed < 0) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
break;
|
|
|
|
case 'P':
|
|
rodent.flags |= NoPnP;
|
|
break;
|
|
|
|
case 'R':
|
|
rodent.flags |= ClearRTS;
|
|
break;
|
|
|
|
case 'S':
|
|
rodent.baudrate = atoi(optarg);
|
|
if (rodent.baudrate <= 0) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
debug("rodent baudrate %d", rodent.baudrate);
|
|
break;
|
|
|
|
case 'T':
|
|
drift_terminate = TRUE;
|
|
sscanf(optarg, "%d,%d,%d", &drift_distance, &drift_time,
|
|
&drift_after);
|
|
if (drift_distance <= 0 || drift_time <= 0 || drift_after <= 0) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
debug("terminate drift: distance %d, time %d, after %d",
|
|
drift_distance, drift_time, drift_after);
|
|
drift_time_ts.tv_sec = drift_time / 1000;
|
|
drift_time_ts.tv_nsec = (drift_time % 1000) * 1000000;
|
|
drift_2time_ts.tv_sec = (drift_time *= 2) / 1000;
|
|
drift_2time_ts.tv_nsec = (drift_time % 1000) * 1000000;
|
|
drift_after_ts.tv_sec = drift_after / 1000;
|
|
drift_after_ts.tv_nsec = (drift_after % 1000) * 1000000;
|
|
break;
|
|
|
|
case 't':
|
|
if (strcmp(optarg, "auto") == 0) {
|
|
rodent.rtype = MOUSE_PROTO_UNKNOWN;
|
|
rodent.flags &= ~NoPnP;
|
|
rodent.level = -1;
|
|
break;
|
|
}
|
|
for (i = 0; rnames[i] != NULL; i++)
|
|
if (strcmp(optarg, rnames[i]) == 0) {
|
|
rodent.rtype = i;
|
|
rodent.flags |= NoPnP;
|
|
rodent.level = (i == MOUSE_PROTO_SYSMOUSE) ? 1 : 0;
|
|
break;
|
|
}
|
|
if (rnames[i] == NULL) {
|
|
warnx("no such mouse type `%s'", optarg);
|
|
usage();
|
|
}
|
|
break;
|
|
|
|
case 'V':
|
|
rodent.flags |= VirtualScroll;
|
|
break;
|
|
case 'U':
|
|
rodent.scrollthreshold = atoi(optarg);
|
|
if (rodent.scrollthreshold < 0) {
|
|
warnx("invalid argument `%s'", optarg);
|
|
usage();
|
|
}
|
|
break;
|
|
|
|
case 'h':
|
|
case '?':
|
|
default:
|
|
usage();
|
|
}
|
|
|
|
/* fix Z axis mapping */
|
|
for (i = 0; i < 4; ++i) {
|
|
if (rodent.zmap[i] > 0) {
|
|
for (j = 0; j < MOUSE_MAXBUTTON; ++j) {
|
|
if (mstate[j] == &bstate[rodent.zmap[i] - 1])
|
|
mstate[j] = &zstate[i];
|
|
}
|
|
rodent.zmap[i] = 1 << (rodent.zmap[i] - 1);
|
|
}
|
|
}
|
|
|
|
/* the default port name */
|
|
switch(rodent.rtype) {
|
|
|
|
case MOUSE_PROTO_INPORT:
|
|
/* INPORT and BUS are the same... */
|
|
rodent.rtype = MOUSE_PROTO_BUS;
|
|
/* FALLTHROUGH */
|
|
case MOUSE_PROTO_BUS:
|
|
if (!rodent.portname)
|
|
rodent.portname = "/dev/mse0";
|
|
break;
|
|
|
|
case MOUSE_PROTO_PS2:
|
|
if (!rodent.portname)
|
|
rodent.portname = "/dev/psm0";
|
|
break;
|
|
|
|
default:
|
|
if (rodent.portname)
|
|
break;
|
|
warnx("no port name specified");
|
|
usage();
|
|
}
|
|
|
|
if (strncmp(rodent.portname, "/dev/ums", 8) == 0)
|
|
rodent.is_removable = 1;
|
|
|
|
for (;;) {
|
|
if (setjmp(env) == 0) {
|
|
signal(SIGHUP, hup);
|
|
signal(SIGINT , cleanup);
|
|
signal(SIGQUIT, cleanup);
|
|
signal(SIGTERM, cleanup);
|
|
signal(SIGUSR1, pause_mouse);
|
|
|
|
rodent.mfd = open(rodent.portname, O_RDWR | O_NONBLOCK);
|
|
if (rodent.mfd == -1)
|
|
logerr(1, "unable to open %s", rodent.portname);
|
|
if (r_identify() == MOUSE_PROTO_UNKNOWN) {
|
|
logwarnx("cannot determine mouse type on %s", rodent.portname);
|
|
close(rodent.mfd);
|
|
rodent.mfd = -1;
|
|
}
|
|
|
|
/* print some information */
|
|
if (identify != ID_NONE) {
|
|
if (identify == ID_ALL)
|
|
printf("%s %s %s %s\n",
|
|
rodent.portname, r_if(rodent.hw.iftype),
|
|
r_name(rodent.rtype), r_model(rodent.hw.model));
|
|
else if (identify & ID_PORT)
|
|
printf("%s\n", rodent.portname);
|
|
else if (identify & ID_IF)
|
|
printf("%s\n", r_if(rodent.hw.iftype));
|
|
else if (identify & ID_TYPE)
|
|
printf("%s\n", r_name(rodent.rtype));
|
|
else if (identify & ID_MODEL)
|
|
printf("%s\n", r_model(rodent.hw.model));
|
|
exit(0);
|
|
} else {
|
|
debug("port: %s interface: %s type: %s model: %s",
|
|
rodent.portname, r_if(rodent.hw.iftype),
|
|
r_name(rodent.rtype), r_model(rodent.hw.model));
|
|
}
|
|
|
|
if (rodent.mfd == -1) {
|
|
/*
|
|
* We cannot continue because of error. Exit if the
|
|
* program has not become a daemon. Otherwise, block
|
|
* until the user corrects the problem and issues SIGHUP.
|
|
*/
|
|
if (!background)
|
|
exit(1);
|
|
sigpause(0);
|
|
}
|
|
|
|
r_init(); /* call init function */
|
|
moused();
|
|
}
|
|
|
|
if (rodent.mfd != -1)
|
|
close(rodent.mfd);
|
|
if (rodent.cfd != -1)
|
|
close(rodent.cfd);
|
|
rodent.mfd = rodent.cfd = -1;
|
|
if (rodent.is_removable)
|
|
exit(0);
|
|
}
|
|
/* NOT REACHED */
|
|
|
|
exit(0);
|
|
}
|
|
|
|
/*
|
|
* Function to calculate linear acceleration.
|
|
*
|
|
* If there are any rounding errors, the remainder
|
|
* is stored in the remainx and remainy variables
|
|
* and taken into account upon the next movement.
|
|
*/
|
|
|
|
static void
|
|
linacc(int dx, int dy, int *movex, int *movey)
|
|
{
|
|
float fdx, fdy;
|
|
|
|
if (dx == 0 && dy == 0) {
|
|
*movex = *movey = 0;
|
|
return;
|
|
}
|
|
fdx = dx * rodent.accelx + rodent.remainx;
|
|
fdy = dy * rodent.accely + rodent.remainy;
|
|
*movex = lround(fdx);
|
|
*movey = lround(fdy);
|
|
rodent.remainx = fdx - *movex;
|
|
rodent.remainy = fdy - *movey;
|
|
}
|
|
|
|
/*
|
|
* Function to calculate exponential acceleration.
|
|
* (Also includes linear acceleration if enabled.)
|
|
*
|
|
* In order to give a smoother behaviour, we record the four
|
|
* most recent non-zero movements and use their average value
|
|
* to calculate the acceleration.
|
|
*/
|
|
|
|
static void
|
|
expoacc(int dx, int dy, int *movex, int *movey)
|
|
{
|
|
static float lastlength[3] = {0.0, 0.0, 0.0};
|
|
float fdx, fdy, length, lbase, accel;
|
|
|
|
if (dx == 0 && dy == 0) {
|
|
*movex = *movey = 0;
|
|
return;
|
|
}
|
|
fdx = dx * rodent.accelx;
|
|
fdy = dy * rodent.accely;
|
|
length = sqrtf((fdx * fdx) + (fdy * fdy)); /* Pythagoras */
|
|
length = (length + lastlength[0] + lastlength[1] + lastlength[2]) / 4;
|
|
lbase = length / rodent.expoffset;
|
|
accel = powf(lbase, rodent.expoaccel) / lbase;
|
|
fdx = fdx * accel + rodent.remainx;
|
|
fdy = fdy * accel + rodent.remainy;
|
|
*movex = lroundf(fdx);
|
|
*movey = lroundf(fdy);
|
|
rodent.remainx = fdx - *movex;
|
|
rodent.remainy = fdy - *movey;
|
|
lastlength[2] = lastlength[1];
|
|
lastlength[1] = lastlength[0];
|
|
lastlength[0] = length; /* Insert new average, not original length! */
|
|
}
|
|
|
|
static void
|
|
moused(void)
|
|
{
|
|
struct mouse_info mouse;
|
|
mousestatus_t action0; /* original mouse action */
|
|
mousestatus_t action; /* interim buffer */
|
|
mousestatus_t action2; /* mapped action */
|
|
struct timeval timeout;
|
|
fd_set fds;
|
|
u_char b;
|
|
pid_t mpid;
|
|
int flags;
|
|
int c;
|
|
int i;
|
|
|
|
if ((rodent.cfd = open("/dev/consolectl", O_RDWR, 0)) == -1)
|
|
logerr(1, "cannot open /dev/consolectl");
|
|
|
|
if (!nodaemon && !background) {
|
|
pfh = pidfile_open(pidfile, 0600, &mpid);
|
|
if (pfh == NULL) {
|
|
if (errno == EEXIST)
|
|
logerrx(1, "moused already running, pid: %d", mpid);
|
|
logwarn("cannot open pid file");
|
|
}
|
|
if (daemon(0, 0)) {
|
|
int saved_errno = errno;
|
|
pidfile_remove(pfh);
|
|
errno = saved_errno;
|
|
logerr(1, "failed to become a daemon");
|
|
} else {
|
|
background = TRUE;
|
|
pidfile_write(pfh);
|
|
}
|
|
}
|
|
|
|
/* clear mouse data */
|
|
bzero(&action0, sizeof(action0));
|
|
bzero(&action, sizeof(action));
|
|
bzero(&action2, sizeof(action2));
|
|
bzero(&mouse, sizeof(mouse));
|
|
mouse_button_state = S0;
|
|
clock_gettime(CLOCK_MONOTONIC_FAST, &mouse_button_state_ts);
|
|
mouse_move_delayed = 0;
|
|
for (i = 0; i < MOUSE_MAXBUTTON; ++i) {
|
|
bstate[i].count = 0;
|
|
bstate[i].ts = mouse_button_state_ts;
|
|
}
|
|
for (i = 0; i < (int)(sizeof(zstate) / sizeof(zstate[0])); ++i) {
|
|
zstate[i].count = 0;
|
|
zstate[i].ts = mouse_button_state_ts;
|
|
}
|
|
|
|
/* choose which ioctl command to use */
|
|
mouse.operation = MOUSE_MOTION_EVENT;
|
|
extioctl = (ioctl(rodent.cfd, CONS_MOUSECTL, &mouse) == 0);
|
|
|
|
/* process mouse data */
|
|
timeout.tv_sec = 0;
|
|
timeout.tv_usec = 20000; /* 20 msec */
|
|
for (;;) {
|
|
|
|
FD_ZERO(&fds);
|
|
FD_SET(rodent.mfd, &fds);
|
|
if (rodent.mremsfd >= 0)
|
|
FD_SET(rodent.mremsfd, &fds);
|
|
if (rodent.mremcfd >= 0)
|
|
FD_SET(rodent.mremcfd, &fds);
|
|
|
|
c = select(FD_SETSIZE, &fds, NULL, NULL,
|
|
((rodent.flags & Emulate3Button) &&
|
|
S_DELAYED(mouse_button_state)) ? &timeout : NULL);
|
|
if (c < 0) { /* error */
|
|
logwarn("failed to read from mouse");
|
|
continue;
|
|
} else if (c == 0) { /* timeout */
|
|
/* assert(rodent.flags & Emulate3Button) */
|
|
action0.button = action0.obutton;
|
|
action0.dx = action0.dy = action0.dz = 0;
|
|
action0.flags = flags = 0;
|
|
if (r_timeout() && r_statetrans(&action0, &action, A_TIMEOUT)) {
|
|
if (debug > 2)
|
|
debug("flags:%08x buttons:%08x obuttons:%08x",
|
|
action.flags, action.button, action.obutton);
|
|
} else {
|
|
action0.obutton = action0.button;
|
|
continue;
|
|
}
|
|
} else {
|
|
/* MouseRemote client connect/disconnect */
|
|
if ((rodent.mremsfd >= 0) && FD_ISSET(rodent.mremsfd, &fds)) {
|
|
mremote_clientchg(TRUE);
|
|
continue;
|
|
}
|
|
if ((rodent.mremcfd >= 0) && FD_ISSET(rodent.mremcfd, &fds)) {
|
|
mremote_clientchg(FALSE);
|
|
continue;
|
|
}
|
|
/* mouse movement */
|
|
if (read(rodent.mfd, &b, 1) == -1) {
|
|
if (errno == EWOULDBLOCK)
|
|
continue;
|
|
else
|
|
return;
|
|
}
|
|
if ((flags = r_protocol(b, &action0)) == 0)
|
|
continue;
|
|
|
|
if ((rodent.flags & VirtualScroll) || (rodent.flags & HVirtualScroll)) {
|
|
/* Allow middle button drags to scroll up and down */
|
|
if (action0.button == MOUSE_BUTTON2DOWN) {
|
|
if (scroll_state == SCROLL_NOTSCROLLING) {
|
|
scroll_state = SCROLL_PREPARE;
|
|
scroll_movement = hscroll_movement = 0;
|
|
debug("PREPARING TO SCROLL");
|
|
}
|
|
debug("[BUTTON2] flags:%08x buttons:%08x obuttons:%08x",
|
|
action.flags, action.button, action.obutton);
|
|
} else {
|
|
debug("[NOTBUTTON2] flags:%08x buttons:%08x obuttons:%08x",
|
|
action.flags, action.button, action.obutton);
|
|
|
|
/* This isn't a middle button down... move along... */
|
|
if (scroll_state == SCROLL_SCROLLING) {
|
|
/*
|
|
* We were scrolling, someone let go of button 2.
|
|
* Now turn autoscroll off.
|
|
*/
|
|
scroll_state = SCROLL_NOTSCROLLING;
|
|
debug("DONE WITH SCROLLING / %d", scroll_state);
|
|
} else if (scroll_state == SCROLL_PREPARE) {
|
|
mousestatus_t newaction = action0;
|
|
|
|
/* We were preparing to scroll, but we never moved... */
|
|
r_timestamp(&action0);
|
|
r_statetrans(&action0, &newaction,
|
|
A(newaction.button & MOUSE_BUTTON1DOWN,
|
|
action0.button & MOUSE_BUTTON3DOWN));
|
|
|
|
/* Send middle down */
|
|
newaction.button = MOUSE_BUTTON2DOWN;
|
|
r_click(&newaction);
|
|
|
|
/* Send middle up */
|
|
r_timestamp(&newaction);
|
|
newaction.obutton = newaction.button;
|
|
newaction.button = action0.button;
|
|
r_click(&newaction);
|
|
}
|
|
}
|
|
}
|
|
|
|
r_timestamp(&action0);
|
|
r_statetrans(&action0, &action,
|
|
A(action0.button & MOUSE_BUTTON1DOWN,
|
|
action0.button & MOUSE_BUTTON3DOWN));
|
|
debug("flags:%08x buttons:%08x obuttons:%08x", action.flags,
|
|
action.button, action.obutton);
|
|
}
|
|
action0.obutton = action0.button;
|
|
flags &= MOUSE_POSCHANGED;
|
|
flags |= action.obutton ^ action.button;
|
|
action.flags = flags;
|
|
|
|
if (flags) { /* handler detected action */
|
|
r_map(&action, &action2);
|
|
debug("activity : buttons 0x%08x dx %d dy %d dz %d",
|
|
action2.button, action2.dx, action2.dy, action2.dz);
|
|
|
|
if ((rodent.flags & VirtualScroll) || (rodent.flags & HVirtualScroll)) {
|
|
/*
|
|
* If *only* the middle button is pressed AND we are moving
|
|
* the stick/trackpoint/nipple, scroll!
|
|
*/
|
|
if (scroll_state == SCROLL_PREPARE) {
|
|
/* Middle button down, waiting for movement threshold */
|
|
if (action2.dy || action2.dx) {
|
|
if (rodent.flags & VirtualScroll) {
|
|
scroll_movement += action2.dy;
|
|
if (scroll_movement < -rodent.scrollthreshold) {
|
|
scroll_state = SCROLL_SCROLLING;
|
|
} else if (scroll_movement > rodent.scrollthreshold) {
|
|
scroll_state = SCROLL_SCROLLING;
|
|
}
|
|
}
|
|
if (rodent.flags & HVirtualScroll) {
|
|
hscroll_movement += action2.dx;
|
|
if (hscroll_movement < -rodent.scrollthreshold) {
|
|
scroll_state = SCROLL_SCROLLING;
|
|
} else if (hscroll_movement > rodent.scrollthreshold) {
|
|
scroll_state = SCROLL_SCROLLING;
|
|
}
|
|
}
|
|
if (scroll_state == SCROLL_SCROLLING) scroll_movement = hscroll_movement = 0;
|
|
}
|
|
} else if (scroll_state == SCROLL_SCROLLING) {
|
|
if (rodent.flags & VirtualScroll) {
|
|
scroll_movement += action2.dy;
|
|
debug("SCROLL: %d", scroll_movement);
|
|
if (scroll_movement < -rodent.scrollspeed) {
|
|
/* Scroll down */
|
|
action2.dz = -1;
|
|
scroll_movement = 0;
|
|
}
|
|
else if (scroll_movement > rodent.scrollspeed) {
|
|
/* Scroll up */
|
|
action2.dz = 1;
|
|
scroll_movement = 0;
|
|
}
|
|
}
|
|
if (rodent.flags & HVirtualScroll) {
|
|
hscroll_movement += action2.dx;
|
|
debug("HORIZONTAL SCROLL: %d", hscroll_movement);
|
|
|
|
if (hscroll_movement < -rodent.scrollspeed) {
|
|
action2.dz = -2;
|
|
hscroll_movement = 0;
|
|
}
|
|
else if (hscroll_movement > rodent.scrollspeed) {
|
|
action2.dz = 2;
|
|
hscroll_movement = 0;
|
|
}
|
|
}
|
|
|
|
/* Don't move while scrolling */
|
|
action2.dx = action2.dy = 0;
|
|
}
|
|
}
|
|
|
|
if (drift_terminate) {
|
|
if ((flags & MOUSE_POSCHANGED) == 0 || action.dz || action2.dz)
|
|
drift_last_activity = drift_current_ts;
|
|
else {
|
|
/* X or/and Y movement only - possibly drift */
|
|
tssub(&drift_current_ts, &drift_last_activity, &drift_tmp);
|
|
if (tscmp(&drift_tmp, &drift_after_ts, >)) {
|
|
tssub(&drift_current_ts, &drift_since, &drift_tmp);
|
|
if (tscmp(&drift_tmp, &drift_time_ts, <)) {
|
|
drift_last.x += action2.dx;
|
|
drift_last.y += action2.dy;
|
|
} else {
|
|
/* discard old accumulated steps (drift) */
|
|
if (tscmp(&drift_tmp, &drift_2time_ts, >))
|
|
drift_previous.x = drift_previous.y = 0;
|
|
else
|
|
drift_previous = drift_last;
|
|
drift_last.x = action2.dx;
|
|
drift_last.y = action2.dy;
|
|
drift_since = drift_current_ts;
|
|
}
|
|
if (abs(drift_last.x) + abs(drift_last.y)
|
|
> drift_distance) {
|
|
/* real movement, pass all accumulated steps */
|
|
action2.dx = drift_previous.x + drift_last.x;
|
|
action2.dy = drift_previous.y + drift_last.y;
|
|
/* and reset accumulators */
|
|
tsclr(&drift_since);
|
|
drift_last.x = drift_last.y = 0;
|
|
/* drift_previous will be cleared at next movement*/
|
|
drift_last_activity = drift_current_ts;
|
|
} else {
|
|
continue; /* don't pass current movement to
|
|
* console driver */
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
if (extioctl) {
|
|
/* Defer clicks until we aren't VirtualScroll'ing. */
|
|
if (scroll_state == SCROLL_NOTSCROLLING)
|
|
r_click(&action2);
|
|
|
|
if (action2.flags & MOUSE_POSCHANGED) {
|
|
mouse.operation = MOUSE_MOTION_EVENT;
|
|
mouse.u.data.buttons = action2.button;
|
|
if (rodent.flags & ExponentialAcc) {
|
|
expoacc(action2.dx, action2.dy,
|
|
&mouse.u.data.x, &mouse.u.data.y);
|
|
}
|
|
else {
|
|
linacc(action2.dx, action2.dy,
|
|
&mouse.u.data.x, &mouse.u.data.y);
|
|
}
|
|
mouse.u.data.z = action2.dz;
|
|
if (debug < 2)
|
|
if (!paused)
|
|
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
|
|
}
|
|
} else {
|
|
mouse.operation = MOUSE_ACTION;
|
|
mouse.u.data.buttons = action2.button;
|
|
if (rodent.flags & ExponentialAcc) {
|
|
expoacc(action2.dx, action2.dy,
|
|
&mouse.u.data.x, &mouse.u.data.y);
|
|
}
|
|
else {
|
|
linacc(action2.dx, action2.dy,
|
|
&mouse.u.data.x, &mouse.u.data.y);
|
|
}
|
|
mouse.u.data.z = action2.dz;
|
|
if (debug < 2)
|
|
if (!paused)
|
|
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
|
|
}
|
|
|
|
/*
|
|
* If the Z axis movement is mapped to an imaginary physical
|
|
* button, we need to cook up a corresponding button `up' event
|
|
* after sending a button `down' event.
|
|
*/
|
|
if ((rodent.zmap[0] > 0) && (action.dz != 0)) {
|
|
action.obutton = action.button;
|
|
action.dx = action.dy = action.dz = 0;
|
|
r_map(&action, &action2);
|
|
debug("activity : buttons 0x%08x dx %d dy %d dz %d",
|
|
action2.button, action2.dx, action2.dy, action2.dz);
|
|
|
|
if (extioctl) {
|
|
r_click(&action2);
|
|
} else {
|
|
mouse.operation = MOUSE_ACTION;
|
|
mouse.u.data.buttons = action2.button;
|
|
mouse.u.data.x = mouse.u.data.y = mouse.u.data.z = 0;
|
|
if (debug < 2)
|
|
if (!paused)
|
|
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
/* NOT REACHED */
|
|
}
|
|
|
|
static void
|
|
hup(__unused int sig)
|
|
{
|
|
longjmp(env, 1);
|
|
}
|
|
|
|
static void
|
|
cleanup(__unused int sig)
|
|
{
|
|
if (rodent.rtype == MOUSE_PROTO_X10MOUSEREM)
|
|
unlink(_PATH_MOUSEREMOTE);
|
|
exit(0);
|
|
}
|
|
|
|
static void
|
|
pause_mouse(__unused int sig)
|
|
{
|
|
paused = !paused;
|
|
}
|
|
|
|
/**
|
|
** usage
|
|
**
|
|
** Complain, and free the CPU for more worthy tasks
|
|
**/
|
|
static void
|
|
usage(void)
|
|
{
|
|
fprintf(stderr, "%s\n%s\n%s\n%s\n%s\n",
|
|
"usage: moused [-DRcdfs] [-I file] [-F rate] [-r resolution] [-S baudrate]",
|
|
" [-VH [-U threshold]] [-a X[,Y]] [-C threshold] [-m N=M] [-w N]",
|
|
" [-z N] [-t <mousetype>] [-l level] [-3 [-E timeout]]",
|
|
" [-T distance[,time[,after]]] -p <port>",
|
|
" moused [-d] -i <port|if|type|model|all> -p <port>");
|
|
exit(1);
|
|
}
|
|
|
|
/*
|
|
* Output an error message to syslog or stderr as appropriate. If
|
|
* `errnum' is non-zero, append its string form to the message.
|
|
*/
|
|
static void
|
|
log_or_warn(int log_pri, int errnum, const char *fmt, ...)
|
|
{
|
|
va_list ap;
|
|
char buf[256];
|
|
|
|
va_start(ap, fmt);
|
|
vsnprintf(buf, sizeof(buf), fmt, ap);
|
|
va_end(ap);
|
|
if (errnum) {
|
|
strlcat(buf, ": ", sizeof(buf));
|
|
strlcat(buf, strerror(errnum), sizeof(buf));
|
|
}
|
|
|
|
if (background)
|
|
syslog(log_pri, "%s", buf);
|
|
else
|
|
warnx("%s", buf);
|
|
}
|
|
|
|
/**
|
|
** Mouse interface code, courtesy of XFree86 3.1.2.
|
|
**
|
|
** Note: Various bits have been trimmed, and in my shortsighted enthusiasm
|
|
** to clean, reformat and rationalise naming, it's quite possible that
|
|
** some things in here have been broken.
|
|
**
|
|
** I hope not 8)
|
|
**
|
|
** The following code is derived from a module marked :
|
|
**/
|
|
|
|
/* $XConsortium: xf86_Mouse.c,v 1.2 94/10/12 20:33:21 kaleb Exp $ */
|
|
/* $XFree86: xc/programs/Xserver/hw/xfree86/common/xf86_Mouse.c,v 3.2 1995/01/28
|
|
17:03:40 dawes Exp $ */
|
|
/*
|
|
*
|
|
* Copyright 1990,91 by Thomas Roell, Dinkelscherben, Germany.
|
|
* Copyright 1993 by David Dawes <dawes@physics.su.oz.au>
|
|
*
|
|
* Permission to use, copy, modify, distribute, and sell this software and its
|
|
* documentation for any purpose is hereby granted without fee, provided that
|
|
* the above copyright notice appear in all copies and that both that
|
|
* copyright notice and this permission notice appear in supporting
|
|
* documentation, and that the names of Thomas Roell and David Dawes not be
|
|
* used in advertising or publicity pertaining to distribution of the
|
|
* software without specific, written prior permission. Thomas Roell
|
|
* and David Dawes makes no representations about the suitability of this
|
|
* software for any purpose. It is provided "as is" without express or
|
|
* implied warranty.
|
|
*
|
|
* THOMAS ROELL AND DAVID DAWES DISCLAIM ALL WARRANTIES WITH REGARD TO THIS
|
|
* SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
|
|
* FITNESS, IN NO EVENT SHALL THOMAS ROELL OR DAVID DAWES BE LIABLE FOR ANY
|
|
* SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
|
|
* RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
|
|
* CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
/**
|
|
** GlidePoint support from XFree86 3.2.
|
|
** Derived from the module:
|
|
**/
|
|
|
|
/* $XFree86: xc/programs/Xserver/hw/xfree86/common/xf86_Mouse.c,v 3.19 1996/10/16 14:40:51 dawes Exp $ */
|
|
/* $XConsortium: xf86_Mouse.c /main/10 1996/01/30 15:16:12 kaleb $ */
|
|
|
|
/* the following table must be ordered by MOUSE_PROTO_XXX in mouse.h */
|
|
static unsigned char proto[][7] = {
|
|
/* hd_mask hd_id dp_mask dp_id bytes b4_mask b4_id */
|
|
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x23, 0x00 }, /* MicroSoft */
|
|
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* MouseSystems */
|
|
{ 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* Logitech */
|
|
{ 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* MMSeries */
|
|
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* MouseMan */
|
|
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* Bus */
|
|
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* InPort */
|
|
{ 0xc0, 0x00, 0x00, 0x00, 3, 0x00, 0xff }, /* PS/2 mouse */
|
|
{ 0xe0, 0x80, 0x80, 0x00, 3, 0x00, 0xff }, /* MM HitTablet */
|
|
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* GlidePoint */
|
|
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x3f, 0x00 }, /* IntelliMouse */
|
|
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x33, 0x00 }, /* ThinkingMouse */
|
|
{ 0xf8, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* sysmouse */
|
|
{ 0x40, 0x40, 0x40, 0x00, 3, ~0x23, 0x00 }, /* X10 MouseRem */
|
|
{ 0x80, 0x80, 0x00, 0x00, 5, 0x00, 0xff }, /* KIDSPAD */
|
|
{ 0xc3, 0xc0, 0x00, 0x00, 6, 0x00, 0xff }, /* VersaPad */
|
|
{ 0x00, 0x00, 0x00, 0x00, 1, 0x00, 0xff }, /* JogDial */
|
|
#if notyet
|
|
{ 0xf8, 0x80, 0x00, 0x00, 5, ~0x2f, 0x10 }, /* Mariqua */
|
|
#endif
|
|
};
|
|
static unsigned char cur_proto[7];
|
|
|
|
static int
|
|
r_identify(void)
|
|
{
|
|
char pnpbuf[256]; /* PnP identifier string may be up to 256 bytes long */
|
|
pnpid_t pnpid;
|
|
symtab_t *t;
|
|
int level;
|
|
int len;
|
|
|
|
/* set the driver operation level, if applicable */
|
|
if (rodent.level < 0)
|
|
rodent.level = 1;
|
|
ioctl(rodent.mfd, MOUSE_SETLEVEL, &rodent.level);
|
|
rodent.level = (ioctl(rodent.mfd, MOUSE_GETLEVEL, &level) == 0) ? level : 0;
|
|
|
|
/*
|
|
* Interrogate the driver and get some intelligence on the device...
|
|
* The following ioctl functions are not always supported by device
|
|
* drivers. When the driver doesn't support them, we just trust the
|
|
* user to supply valid information.
|
|
*/
|
|
rodent.hw.iftype = MOUSE_IF_UNKNOWN;
|
|
rodent.hw.model = MOUSE_MODEL_GENERIC;
|
|
ioctl(rodent.mfd, MOUSE_GETHWINFO, &rodent.hw);
|
|
|
|
if (rodent.rtype != MOUSE_PROTO_UNKNOWN)
|
|
bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto));
|
|
rodent.mode.protocol = MOUSE_PROTO_UNKNOWN;
|
|
rodent.mode.rate = -1;
|
|
rodent.mode.resolution = MOUSE_RES_UNKNOWN;
|
|
rodent.mode.accelfactor = 0;
|
|
rodent.mode.level = 0;
|
|
if (ioctl(rodent.mfd, MOUSE_GETMODE, &rodent.mode) == 0) {
|
|
if (rodent.mode.protocol == MOUSE_PROTO_UNKNOWN ||
|
|
rodent.mode.protocol >= (int)(sizeof(proto) / sizeof(proto[0]))) {
|
|
logwarnx("unknown mouse protocol (%d)", rodent.mode.protocol);
|
|
return (MOUSE_PROTO_UNKNOWN);
|
|
} else {
|
|
/* INPORT and BUS are the same... */
|
|
if (rodent.mode.protocol == MOUSE_PROTO_INPORT)
|
|
rodent.mode.protocol = MOUSE_PROTO_BUS;
|
|
if (rodent.mode.protocol != rodent.rtype) {
|
|
/* Hmm, the driver doesn't agree with the user... */
|
|
if (rodent.rtype != MOUSE_PROTO_UNKNOWN)
|
|
logwarnx("mouse type mismatch (%s != %s), %s is assumed",
|
|
r_name(rodent.mode.protocol), r_name(rodent.rtype),
|
|
r_name(rodent.mode.protocol));
|
|
rodent.rtype = rodent.mode.protocol;
|
|
bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto));
|
|
}
|
|
}
|
|
cur_proto[4] = rodent.mode.packetsize;
|
|
cur_proto[0] = rodent.mode.syncmask[0]; /* header byte bit mask */
|
|
cur_proto[1] = rodent.mode.syncmask[1]; /* header bit pattern */
|
|
}
|
|
|
|
/* maybe this is a PnP mouse... */
|
|
if (rodent.mode.protocol == MOUSE_PROTO_UNKNOWN) {
|
|
|
|
if (rodent.flags & NoPnP)
|
|
return (rodent.rtype);
|
|
if (((len = pnpgets(pnpbuf)) <= 0) || !pnpparse(&pnpid, pnpbuf, len))
|
|
return (rodent.rtype);
|
|
|
|
debug("PnP serial mouse: '%*.*s' '%*.*s' '%*.*s'",
|
|
pnpid.neisaid, pnpid.neisaid, pnpid.eisaid,
|
|
pnpid.ncompat, pnpid.ncompat, pnpid.compat,
|
|
pnpid.ndescription, pnpid.ndescription, pnpid.description);
|
|
|
|
/* we have a valid PnP serial device ID */
|
|
rodent.hw.iftype = MOUSE_IF_SERIAL;
|
|
t = pnpproto(&pnpid);
|
|
if (t != NULL) {
|
|
rodent.mode.protocol = t->val;
|
|
rodent.hw.model = t->val2;
|
|
} else {
|
|
rodent.mode.protocol = MOUSE_PROTO_UNKNOWN;
|
|
}
|
|
if (rodent.mode.protocol == MOUSE_PROTO_INPORT)
|
|
rodent.mode.protocol = MOUSE_PROTO_BUS;
|
|
|
|
/* make final adjustment */
|
|
if (rodent.mode.protocol != MOUSE_PROTO_UNKNOWN) {
|
|
if (rodent.mode.protocol != rodent.rtype) {
|
|
/* Hmm, the device doesn't agree with the user... */
|
|
if (rodent.rtype != MOUSE_PROTO_UNKNOWN)
|
|
logwarnx("mouse type mismatch (%s != %s), %s is assumed",
|
|
r_name(rodent.mode.protocol), r_name(rodent.rtype),
|
|
r_name(rodent.mode.protocol));
|
|
rodent.rtype = rodent.mode.protocol;
|
|
bcopy(proto[rodent.rtype], cur_proto, sizeof(cur_proto));
|
|
}
|
|
}
|
|
}
|
|
|
|
debug("proto params: %02x %02x %02x %02x %d %02x %02x",
|
|
cur_proto[0], cur_proto[1], cur_proto[2], cur_proto[3],
|
|
cur_proto[4], cur_proto[5], cur_proto[6]);
|
|
|
|
return (rodent.rtype);
|
|
}
|
|
|
|
static const char *
|
|
r_if(int iftype)
|
|
{
|
|
|
|
return (gettokenname(rifs, iftype));
|
|
}
|
|
|
|
static const char *
|
|
r_name(int type)
|
|
{
|
|
const char *unknown = "unknown";
|
|
|
|
return (type == MOUSE_PROTO_UNKNOWN ||
|
|
type >= (int)(sizeof(rnames) / sizeof(rnames[0])) ?
|
|
unknown : rnames[type]);
|
|
}
|
|
|
|
static const char *
|
|
r_model(int model)
|
|
{
|
|
|
|
return (gettokenname(rmodels, model));
|
|
}
|
|
|
|
static void
|
|
r_init(void)
|
|
{
|
|
unsigned char buf[16]; /* scrach buffer */
|
|
fd_set fds;
|
|
const char *s;
|
|
char c;
|
|
int i;
|
|
|
|
/**
|
|
** This comment is a little out of context here, but it contains
|
|
** some useful information...
|
|
********************************************************************
|
|
**
|
|
** The following lines take care of the Logitech MouseMan protocols.
|
|
**
|
|
** NOTE: There are different versions of both MouseMan and TrackMan!
|
|
** Hence I add another protocol P_LOGIMAN, which the user can
|
|
** specify as MouseMan in his XF86Config file. This entry was
|
|
** formerly handled as a special case of P_MS. However, people
|
|
** who don't have the middle button problem, can still specify
|
|
** Microsoft and use P_MS.
|
|
**
|
|
** By default, these mice should use a 3 byte Microsoft protocol
|
|
** plus a 4th byte for the middle button. However, the mouse might
|
|
** have switched to a different protocol before we use it, so I send
|
|
** the proper sequence just in case.
|
|
**
|
|
** NOTE: - all commands to (at least the European) MouseMan have to
|
|
** be sent at 1200 Baud.
|
|
** - each command starts with a '*'.
|
|
** - whenever the MouseMan receives a '*', it will switch back
|
|
** to 1200 Baud. Hence I have to select the desired protocol
|
|
** first, then select the baud rate.
|
|
**
|
|
** The protocols supported by the (European) MouseMan are:
|
|
** - 5 byte packed binary protocol, as with the Mouse Systems
|
|
** mouse. Selected by sequence "*U".
|
|
** - 2 button 3 byte MicroSoft compatible protocol. Selected
|
|
** by sequence "*V".
|
|
** - 3 button 3+1 byte MicroSoft compatible protocol (default).
|
|
** Selected by sequence "*X".
|
|
**
|
|
** The following baud rates are supported:
|
|
** - 1200 Baud (default). Selected by sequence "*n".
|
|
** - 9600 Baud. Selected by sequence "*q".
|
|
**
|
|
** Selecting a sample rate is no longer supported with the MouseMan!
|
|
** Some additional lines in xf86Config.c take care of ill configured
|
|
** baud rates and sample rates. (The user will get an error.)
|
|
*/
|
|
|
|
switch (rodent.rtype) {
|
|
|
|
case MOUSE_PROTO_LOGI:
|
|
/*
|
|
* The baud rate selection command must be sent at the current
|
|
* baud rate; try all likely settings
|
|
*/
|
|
setmousespeed(9600, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
setmousespeed(4800, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
setmousespeed(2400, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
/* select MM series data format */
|
|
write(rodent.mfd, "S", 1);
|
|
setmousespeed(rodent.baudrate, rodent.baudrate,
|
|
rodentcflags[MOUSE_PROTO_MM]);
|
|
/* select report rate/frequency */
|
|
if (rodent.rate <= 0) write(rodent.mfd, "O", 1);
|
|
else if (rodent.rate <= 15) write(rodent.mfd, "J", 1);
|
|
else if (rodent.rate <= 27) write(rodent.mfd, "K", 1);
|
|
else if (rodent.rate <= 42) write(rodent.mfd, "L", 1);
|
|
else if (rodent.rate <= 60) write(rodent.mfd, "R", 1);
|
|
else if (rodent.rate <= 85) write(rodent.mfd, "M", 1);
|
|
else if (rodent.rate <= 125) write(rodent.mfd, "Q", 1);
|
|
else write(rodent.mfd, "N", 1);
|
|
break;
|
|
|
|
case MOUSE_PROTO_LOGIMOUSEMAN:
|
|
/* The command must always be sent at 1200 baud */
|
|
setmousespeed(1200, 1200, rodentcflags[rodent.rtype]);
|
|
write(rodent.mfd, "*X", 2);
|
|
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
break;
|
|
|
|
case MOUSE_PROTO_HITTAB:
|
|
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
|
|
/*
|
|
* Initialize Hitachi PUMA Plus - Model 1212E to desired settings.
|
|
* The tablet must be configured to be in MM mode, NO parity,
|
|
* Binary Format. xf86Info.sampleRate controls the sensativity
|
|
* of the tablet. We only use this tablet for it's 4-button puck
|
|
* so we don't run in "Absolute Mode"
|
|
*/
|
|
write(rodent.mfd, "z8", 2); /* Set Parity = "NONE" */
|
|
usleep(50000);
|
|
write(rodent.mfd, "zb", 2); /* Set Format = "Binary" */
|
|
usleep(50000);
|
|
write(rodent.mfd, "@", 1); /* Set Report Mode = "Stream" */
|
|
usleep(50000);
|
|
write(rodent.mfd, "R", 1); /* Set Output Rate = "45 rps" */
|
|
usleep(50000);
|
|
write(rodent.mfd, "I\x20", 2); /* Set Incrememtal Mode "20" */
|
|
usleep(50000);
|
|
write(rodent.mfd, "E", 1); /* Set Data Type = "Relative */
|
|
usleep(50000);
|
|
|
|
/* Resolution is in 'lines per inch' on the Hitachi tablet */
|
|
if (rodent.resolution == MOUSE_RES_LOW) c = 'g';
|
|
else if (rodent.resolution == MOUSE_RES_MEDIUMLOW) c = 'e';
|
|
else if (rodent.resolution == MOUSE_RES_MEDIUMHIGH) c = 'h';
|
|
else if (rodent.resolution == MOUSE_RES_HIGH) c = 'd';
|
|
else if (rodent.resolution <= 40) c = 'g';
|
|
else if (rodent.resolution <= 100) c = 'd';
|
|
else if (rodent.resolution <= 200) c = 'e';
|
|
else if (rodent.resolution <= 500) c = 'h';
|
|
else if (rodent.resolution <= 1000) c = 'j';
|
|
else c = 'd';
|
|
write(rodent.mfd, &c, 1);
|
|
usleep(50000);
|
|
|
|
write(rodent.mfd, "\021", 1); /* Resume DATA output */
|
|
break;
|
|
|
|
case MOUSE_PROTO_THINK:
|
|
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
/* the PnP ID string may be sent again, discard it */
|
|
usleep(200000);
|
|
i = FREAD;
|
|
ioctl(rodent.mfd, TIOCFLUSH, &i);
|
|
/* send the command to initialize the beast */
|
|
for (s = "E5E5"; *s; ++s) {
|
|
write(rodent.mfd, s, 1);
|
|
FD_ZERO(&fds);
|
|
FD_SET(rodent.mfd, &fds);
|
|
if (select(FD_SETSIZE, &fds, NULL, NULL, NULL) <= 0)
|
|
break;
|
|
read(rodent.mfd, &c, 1);
|
|
debug("%c", c);
|
|
if (c != *s)
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case MOUSE_PROTO_JOGDIAL:
|
|
break;
|
|
case MOUSE_PROTO_MSC:
|
|
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
if (rodent.flags & ClearDTR) {
|
|
i = TIOCM_DTR;
|
|
ioctl(rodent.mfd, TIOCMBIC, &i);
|
|
}
|
|
if (rodent.flags & ClearRTS) {
|
|
i = TIOCM_RTS;
|
|
ioctl(rodent.mfd, TIOCMBIC, &i);
|
|
}
|
|
break;
|
|
|
|
case MOUSE_PROTO_SYSMOUSE:
|
|
if (rodent.hw.iftype == MOUSE_IF_SYSMOUSE)
|
|
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
/* FALLTHROUGH */
|
|
|
|
case MOUSE_PROTO_BUS:
|
|
case MOUSE_PROTO_INPORT:
|
|
case MOUSE_PROTO_PS2:
|
|
if (rodent.rate >= 0)
|
|
rodent.mode.rate = rodent.rate;
|
|
if (rodent.resolution != MOUSE_RES_UNKNOWN)
|
|
rodent.mode.resolution = rodent.resolution;
|
|
ioctl(rodent.mfd, MOUSE_SETMODE, &rodent.mode);
|
|
break;
|
|
|
|
case MOUSE_PROTO_X10MOUSEREM:
|
|
mremote_serversetup();
|
|
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
break;
|
|
|
|
|
|
case MOUSE_PROTO_VERSAPAD:
|
|
tcsendbreak(rodent.mfd, 0); /* send break for 400 msec */
|
|
i = FREAD;
|
|
ioctl(rodent.mfd, TIOCFLUSH, &i);
|
|
for (i = 0; i < 7; ++i) {
|
|
FD_ZERO(&fds);
|
|
FD_SET(rodent.mfd, &fds);
|
|
if (select(FD_SETSIZE, &fds, NULL, NULL, NULL) <= 0)
|
|
break;
|
|
read(rodent.mfd, &c, 1);
|
|
buf[i] = c;
|
|
}
|
|
debug("%s\n", buf);
|
|
if ((buf[0] != 'V') || (buf[1] != 'P')|| (buf[7] != '\r'))
|
|
break;
|
|
setmousespeed(9600, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
tcsendbreak(rodent.mfd, 0); /* send break for 400 msec again */
|
|
for (i = 0; i < 7; ++i) {
|
|
FD_ZERO(&fds);
|
|
FD_SET(rodent.mfd, &fds);
|
|
if (select(FD_SETSIZE, &fds, NULL, NULL, NULL) <= 0)
|
|
break;
|
|
read(rodent.mfd, &c, 1);
|
|
debug("%c", c);
|
|
if (c != buf[i])
|
|
break;
|
|
}
|
|
i = FREAD;
|
|
ioctl(rodent.mfd, TIOCFLUSH, &i);
|
|
break;
|
|
|
|
default:
|
|
setmousespeed(1200, rodent.baudrate, rodentcflags[rodent.rtype]);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
r_protocol(u_char rBuf, mousestatus_t *act)
|
|
{
|
|
/* MOUSE_MSS_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */
|
|
static int butmapmss[4] = { /* Microsoft, MouseMan, GlidePoint,
|
|
IntelliMouse, Thinking Mouse */
|
|
0,
|
|
MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON1DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
|
|
};
|
|
static int butmapmss2[4] = { /* Microsoft, MouseMan, GlidePoint,
|
|
Thinking Mouse */
|
|
0,
|
|
MOUSE_BUTTON4DOWN,
|
|
MOUSE_BUTTON2DOWN,
|
|
MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN,
|
|
};
|
|
/* MOUSE_INTELLI_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */
|
|
static int butmapintelli[4] = { /* IntelliMouse, NetMouse, Mie Mouse,
|
|
MouseMan+ */
|
|
0,
|
|
MOUSE_BUTTON2DOWN,
|
|
MOUSE_BUTTON4DOWN,
|
|
MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN,
|
|
};
|
|
/* MOUSE_MSC_BUTTON?UP -> MOUSE_BUTTON?DOWN */
|
|
static int butmapmsc[8] = { /* MouseSystems, MMSeries, Logitech,
|
|
Bus, sysmouse */
|
|
0,
|
|
MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON2DOWN,
|
|
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON1DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
|
|
};
|
|
/* MOUSE_PS2_BUTTON?DOWN -> MOUSE_BUTTON?DOWN */
|
|
static int butmapps2[8] = { /* PS/2 */
|
|
0,
|
|
MOUSE_BUTTON1DOWN,
|
|
MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON2DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN,
|
|
MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN
|
|
};
|
|
/* for Hitachi tablet */
|
|
static int butmaphit[8] = { /* MM HitTablet */
|
|
0,
|
|
MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON2DOWN,
|
|
MOUSE_BUTTON1DOWN,
|
|
MOUSE_BUTTON4DOWN,
|
|
MOUSE_BUTTON5DOWN,
|
|
MOUSE_BUTTON6DOWN,
|
|
MOUSE_BUTTON7DOWN,
|
|
};
|
|
/* for serial VersaPad */
|
|
static int butmapversa[8] = { /* VersaPad */
|
|
0,
|
|
0,
|
|
MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON1DOWN,
|
|
MOUSE_BUTTON1DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
|
|
};
|
|
/* for PS/2 VersaPad */
|
|
static int butmapversaps2[8] = { /* VersaPad */
|
|
0,
|
|
MOUSE_BUTTON3DOWN,
|
|
0,
|
|
MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON1DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
|
|
MOUSE_BUTTON1DOWN,
|
|
MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN,
|
|
};
|
|
static int pBufP = 0;
|
|
static unsigned char pBuf[8];
|
|
static int prev_x, prev_y;
|
|
static int on = FALSE;
|
|
int x, y;
|
|
|
|
debug("received char 0x%x",(int)rBuf);
|
|
if (rodent.rtype == MOUSE_PROTO_KIDSPAD)
|
|
return (kidspad(rBuf, act));
|
|
if (rodent.rtype == MOUSE_PROTO_GTCO_DIGIPAD)
|
|
return (gtco_digipad(rBuf, act));
|
|
|
|
/*
|
|
* Hack for resyncing: We check here for a package that is:
|
|
* a) illegal (detected by wrong data-package header)
|
|
* b) invalid (0x80 == -128 and that might be wrong for MouseSystems)
|
|
* c) bad header-package
|
|
*
|
|
* NOTE: b) is a voilation of the MouseSystems-Protocol, since values of
|
|
* -128 are allowed, but since they are very seldom we can easily
|
|
* use them as package-header with no button pressed.
|
|
* NOTE/2: On a PS/2 mouse any byte is valid as a data byte. Furthermore,
|
|
* 0x80 is not valid as a header byte. For a PS/2 mouse we skip
|
|
* checking data bytes.
|
|
* For resyncing a PS/2 mouse we require the two most significant
|
|
* bits in the header byte to be 0. These are the overflow bits,
|
|
* and in case of an overflow we actually lose sync. Overflows
|
|
* are very rare, however, and we quickly gain sync again after
|
|
* an overflow condition. This is the best we can do. (Actually,
|
|
* we could use bit 0x08 in the header byte for resyncing, since
|
|
* that bit is supposed to be always on, but nobody told
|
|
* Microsoft...)
|
|
*/
|
|
|
|
if (pBufP != 0 && rodent.rtype != MOUSE_PROTO_PS2 &&
|
|
((rBuf & cur_proto[2]) != cur_proto[3] || rBuf == 0x80))
|
|
{
|
|
pBufP = 0; /* skip package */
|
|
}
|
|
|
|
if (pBufP == 0 && (rBuf & cur_proto[0]) != cur_proto[1])
|
|
return (0);
|
|
|
|
/* is there an extra data byte? */
|
|
if (pBufP >= cur_proto[4] && (rBuf & cur_proto[0]) != cur_proto[1])
|
|
{
|
|
/*
|
|
* Hack for Logitech MouseMan Mouse - Middle button
|
|
*
|
|
* Unfortunately this mouse has variable length packets: the standard
|
|
* Microsoft 3 byte packet plus an optional 4th byte whenever the
|
|
* middle button status changes.
|
|
*
|
|
* We have already processed the standard packet with the movement
|
|
* and button info. Now post an event message with the old status
|
|
* of the left and right buttons and the updated middle button.
|
|
*/
|
|
|
|
/*
|
|
* Even worse, different MouseMen and TrackMen differ in the 4th
|
|
* byte: some will send 0x00/0x20, others 0x01/0x21, or even
|
|
* 0x02/0x22, so I have to strip off the lower bits.
|
|
*
|
|
* [JCH-96/01/21]
|
|
* HACK for ALPS "fourth button". (It's bit 0x10 of the "fourth byte"
|
|
* and it is activated by tapping the glidepad with the finger! 8^)
|
|
* We map it to bit bit3, and the reverse map in xf86Events just has
|
|
* to be extended so that it is identified as Button 4. The lower
|
|
* half of the reverse-map may remain unchanged.
|
|
*/
|
|
|
|
/*
|
|
* [KY-97/08/03]
|
|
* Receive the fourth byte only when preceding three bytes have
|
|
* been detected (pBufP >= cur_proto[4]). In the previous
|
|
* versions, the test was pBufP == 0; thus, we may have mistakingly
|
|
* received a byte even if we didn't see anything preceding
|
|
* the byte.
|
|
*/
|
|
|
|
if ((rBuf & cur_proto[5]) != cur_proto[6]) {
|
|
pBufP = 0;
|
|
return (0);
|
|
}
|
|
|
|
switch (rodent.rtype) {
|
|
#if notyet
|
|
case MOUSE_PROTO_MARIQUA:
|
|
/*
|
|
* This mouse has 16! buttons in addition to the standard
|
|
* three of them. They return 0x10 though 0x1f in the
|
|
* so-called `ten key' mode and 0x30 though 0x3f in the
|
|
* `function key' mode. As there are only 31 bits for
|
|
* button state (including the standard three), we ignore
|
|
* the bit 0x20 and don't distinguish the two modes.
|
|
*/
|
|
act->dx = act->dy = act->dz = 0;
|
|
act->obutton = act->button;
|
|
rBuf &= 0x1f;
|
|
act->button = (1 << (rBuf - 13))
|
|
| (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN));
|
|
/*
|
|
* FIXME: this is a button "down" event. There needs to be
|
|
* a corresponding button "up" event... XXX
|
|
*/
|
|
break;
|
|
#endif /* notyet */
|
|
case MOUSE_PROTO_JOGDIAL:
|
|
break;
|
|
|
|
/*
|
|
* IntelliMouse, NetMouse (including NetMouse Pro) and Mie Mouse
|
|
* always send the fourth byte, whereas the fourth byte is
|
|
* optional for GlidePoint and ThinkingMouse. The fourth byte
|
|
* is also optional for MouseMan+ and FirstMouse+ in their
|
|
* native mode. It is always sent if they are in the IntelliMouse
|
|
* compatible mode.
|
|
*/
|
|
case MOUSE_PROTO_INTELLI: /* IntelliMouse, NetMouse, Mie Mouse,
|
|
MouseMan+ */
|
|
act->dx = act->dy = 0;
|
|
act->dz = (rBuf & 0x08) ? (rBuf & 0x0f) - 16 : (rBuf & 0x0f);
|
|
if ((act->dz >= 7) || (act->dz <= -7))
|
|
act->dz = 0;
|
|
act->obutton = act->button;
|
|
act->button = butmapintelli[(rBuf & MOUSE_MSS_BUTTONS) >> 4]
|
|
| (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN));
|
|
break;
|
|
|
|
default:
|
|
act->dx = act->dy = act->dz = 0;
|
|
act->obutton = act->button;
|
|
act->button = butmapmss2[(rBuf & MOUSE_MSS_BUTTONS) >> 4]
|
|
| (act->obutton & (MOUSE_BUTTON1DOWN | MOUSE_BUTTON3DOWN));
|
|
break;
|
|
}
|
|
|
|
act->flags = ((act->dx || act->dy || act->dz) ? MOUSE_POSCHANGED : 0)
|
|
| (act->obutton ^ act->button);
|
|
pBufP = 0;
|
|
return (act->flags);
|
|
}
|
|
|
|
if (pBufP >= cur_proto[4])
|
|
pBufP = 0;
|
|
pBuf[pBufP++] = rBuf;
|
|
if (pBufP != cur_proto[4])
|
|
return (0);
|
|
|
|
/*
|
|
* assembly full package
|
|
*/
|
|
|
|
debug("assembled full packet (len %d) %x,%x,%x,%x,%x,%x,%x,%x",
|
|
cur_proto[4],
|
|
pBuf[0], pBuf[1], pBuf[2], pBuf[3],
|
|
pBuf[4], pBuf[5], pBuf[6], pBuf[7]);
|
|
|
|
act->dz = 0;
|
|
act->obutton = act->button;
|
|
switch (rodent.rtype)
|
|
{
|
|
case MOUSE_PROTO_MS: /* Microsoft */
|
|
case MOUSE_PROTO_LOGIMOUSEMAN: /* MouseMan/TrackMan */
|
|
case MOUSE_PROTO_X10MOUSEREM: /* X10 MouseRemote */
|
|
act->button = act->obutton & MOUSE_BUTTON4DOWN;
|
|
if (rodent.flags & ChordMiddle)
|
|
act->button |= ((pBuf[0] & MOUSE_MSS_BUTTONS) == MOUSE_MSS_BUTTONS)
|
|
? MOUSE_BUTTON2DOWN
|
|
: butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4];
|
|
else
|
|
act->button |= (act->obutton & MOUSE_BUTTON2DOWN)
|
|
| butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4];
|
|
|
|
/* Send X10 btn events to remote client (ensure -128-+127 range) */
|
|
if ((rodent.rtype == MOUSE_PROTO_X10MOUSEREM) &&
|
|
((pBuf[0] & 0xFC) == 0x44) && (pBuf[2] == 0x3F)) {
|
|
if (rodent.mremcfd >= 0) {
|
|
unsigned char key = (signed char)(((pBuf[0] & 0x03) << 6) |
|
|
(pBuf[1] & 0x3F));
|
|
write(rodent.mremcfd, &key, 1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
act->dx = (signed char)(((pBuf[0] & 0x03) << 6) | (pBuf[1] & 0x3F));
|
|
act->dy = (signed char)(((pBuf[0] & 0x0C) << 4) | (pBuf[2] & 0x3F));
|
|
break;
|
|
|
|
case MOUSE_PROTO_GLIDEPOINT: /* GlidePoint */
|
|
case MOUSE_PROTO_THINK: /* ThinkingMouse */
|
|
case MOUSE_PROTO_INTELLI: /* IntelliMouse, NetMouse, Mie Mouse,
|
|
MouseMan+ */
|
|
act->button = (act->obutton & (MOUSE_BUTTON2DOWN | MOUSE_BUTTON4DOWN))
|
|
| butmapmss[(pBuf[0] & MOUSE_MSS_BUTTONS) >> 4];
|
|
act->dx = (signed char)(((pBuf[0] & 0x03) << 6) | (pBuf[1] & 0x3F));
|
|
act->dy = (signed char)(((pBuf[0] & 0x0C) << 4) | (pBuf[2] & 0x3F));
|
|
break;
|
|
|
|
case MOUSE_PROTO_MSC: /* MouseSystems Corp */
|
|
#if notyet
|
|
case MOUSE_PROTO_MARIQUA: /* Mariqua */
|
|
#endif
|
|
act->button = butmapmsc[(~pBuf[0]) & MOUSE_MSC_BUTTONS];
|
|
act->dx = (signed char)(pBuf[1]) + (signed char)(pBuf[3]);
|
|
act->dy = - ((signed char)(pBuf[2]) + (signed char)(pBuf[4]));
|
|
break;
|
|
|
|
case MOUSE_PROTO_JOGDIAL: /* JogDial */
|
|
if (rBuf == 0x6c)
|
|
act->dz = -1;
|
|
if (rBuf == 0x72)
|
|
act->dz = 1;
|
|
if (rBuf == 0x64)
|
|
act->button = MOUSE_BUTTON1DOWN;
|
|
if (rBuf == 0x75)
|
|
act->button = 0;
|
|
break;
|
|
|
|
case MOUSE_PROTO_HITTAB: /* MM HitTablet */
|
|
act->button = butmaphit[pBuf[0] & 0x07];
|
|
act->dx = (pBuf[0] & MOUSE_MM_XPOSITIVE) ? pBuf[1] : - pBuf[1];
|
|
act->dy = (pBuf[0] & MOUSE_MM_YPOSITIVE) ? - pBuf[2] : pBuf[2];
|
|
break;
|
|
|
|
case MOUSE_PROTO_MM: /* MM Series */
|
|
case MOUSE_PROTO_LOGI: /* Logitech Mice */
|
|
act->button = butmapmsc[pBuf[0] & MOUSE_MSC_BUTTONS];
|
|
act->dx = (pBuf[0] & MOUSE_MM_XPOSITIVE) ? pBuf[1] : - pBuf[1];
|
|
act->dy = (pBuf[0] & MOUSE_MM_YPOSITIVE) ? - pBuf[2] : pBuf[2];
|
|
break;
|
|
|
|
case MOUSE_PROTO_VERSAPAD: /* VersaPad */
|
|
act->button = butmapversa[(pBuf[0] & MOUSE_VERSA_BUTTONS) >> 3];
|
|
act->button |= (pBuf[0] & MOUSE_VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
|
|
act->dx = act->dy = 0;
|
|
if (!(pBuf[0] & MOUSE_VERSA_IN_USE)) {
|
|
on = FALSE;
|
|
break;
|
|
}
|
|
x = (pBuf[2] << 6) | pBuf[1];
|
|
if (x & 0x800)
|
|
x -= 0x1000;
|
|
y = (pBuf[4] << 6) | pBuf[3];
|
|
if (y & 0x800)
|
|
y -= 0x1000;
|
|
if (on) {
|
|
act->dx = prev_x - x;
|
|
act->dy = prev_y - y;
|
|
} else {
|
|
on = TRUE;
|
|
}
|
|
prev_x = x;
|
|
prev_y = y;
|
|
break;
|
|
|
|
case MOUSE_PROTO_BUS: /* Bus */
|
|
case MOUSE_PROTO_INPORT: /* InPort */
|
|
act->button = butmapmsc[(~pBuf[0]) & MOUSE_MSC_BUTTONS];
|
|
act->dx = (signed char)pBuf[1];
|
|
act->dy = - (signed char)pBuf[2];
|
|
break;
|
|
|
|
case MOUSE_PROTO_PS2: /* PS/2 */
|
|
act->button = butmapps2[pBuf[0] & MOUSE_PS2_BUTTONS];
|
|
act->dx = (pBuf[0] & MOUSE_PS2_XNEG) ? pBuf[1] - 256 : pBuf[1];
|
|
act->dy = (pBuf[0] & MOUSE_PS2_YNEG) ? -(pBuf[2] - 256) : -pBuf[2];
|
|
/*
|
|
* Moused usually operates the psm driver at the operation level 1
|
|
* which sends mouse data in MOUSE_PROTO_SYSMOUSE protocol.
|
|
* The following code takes effect only when the user explicitly
|
|
* requets the level 2 at which wheel movement and additional button
|
|
* actions are encoded in model-dependent formats. At the level 0
|
|
* the following code is no-op because the psm driver says the model
|
|
* is MOUSE_MODEL_GENERIC.
|
|
*/
|
|
switch (rodent.hw.model) {
|
|
case MOUSE_MODEL_EXPLORER:
|
|
/* wheel and additional button data is in the fourth byte */
|
|
act->dz = (pBuf[3] & MOUSE_EXPLORER_ZNEG)
|
|
? (pBuf[3] & 0x0f) - 16 : (pBuf[3] & 0x0f);
|
|
act->button |= (pBuf[3] & MOUSE_EXPLORER_BUTTON4DOWN)
|
|
? MOUSE_BUTTON4DOWN : 0;
|
|
act->button |= (pBuf[3] & MOUSE_EXPLORER_BUTTON5DOWN)
|
|
? MOUSE_BUTTON5DOWN : 0;
|
|
break;
|
|
case MOUSE_MODEL_INTELLI:
|
|
case MOUSE_MODEL_NET:
|
|
/* wheel data is in the fourth byte */
|
|
act->dz = (signed char)pBuf[3];
|
|
if ((act->dz >= 7) || (act->dz <= -7))
|
|
act->dz = 0;
|
|
/* some compatible mice may have additional buttons */
|
|
act->button |= (pBuf[0] & MOUSE_PS2INTELLI_BUTTON4DOWN)
|
|
? MOUSE_BUTTON4DOWN : 0;
|
|
act->button |= (pBuf[0] & MOUSE_PS2INTELLI_BUTTON5DOWN)
|
|
? MOUSE_BUTTON5DOWN : 0;
|
|
break;
|
|
case MOUSE_MODEL_MOUSEMANPLUS:
|
|
if (((pBuf[0] & MOUSE_PS2PLUS_SYNCMASK) == MOUSE_PS2PLUS_SYNC)
|
|
&& (abs(act->dx) > 191)
|
|
&& MOUSE_PS2PLUS_CHECKBITS(pBuf)) {
|
|
/* the extended data packet encodes button and wheel events */
|
|
switch (MOUSE_PS2PLUS_PACKET_TYPE(pBuf)) {
|
|
case 1:
|
|
/* wheel data packet */
|
|
act->dx = act->dy = 0;
|
|
if (pBuf[2] & 0x80) {
|
|
/* horizontal roller count - ignore it XXX*/
|
|
} else {
|
|
/* vertical roller count */
|
|
act->dz = (pBuf[2] & MOUSE_PS2PLUS_ZNEG)
|
|
? (pBuf[2] & 0x0f) - 16 : (pBuf[2] & 0x0f);
|
|
}
|
|
act->button |= (pBuf[2] & MOUSE_PS2PLUS_BUTTON4DOWN)
|
|
? MOUSE_BUTTON4DOWN : 0;
|
|
act->button |= (pBuf[2] & MOUSE_PS2PLUS_BUTTON5DOWN)
|
|
? MOUSE_BUTTON5DOWN : 0;
|
|
break;
|
|
case 2:
|
|
/* this packet type is reserved by Logitech */
|
|
/*
|
|
* IBM ScrollPoint Mouse uses this packet type to
|
|
* encode both vertical and horizontal scroll movement.
|
|
*/
|
|
act->dx = act->dy = 0;
|
|
/* horizontal roller count */
|
|
if (pBuf[2] & 0x0f)
|
|
act->dz = (pBuf[2] & MOUSE_SPOINT_WNEG) ? -2 : 2;
|
|
/* vertical roller count */
|
|
if (pBuf[2] & 0xf0)
|
|
act->dz = (pBuf[2] & MOUSE_SPOINT_ZNEG) ? -1 : 1;
|
|
#if 0
|
|
/* vertical roller count */
|
|
act->dz = (pBuf[2] & MOUSE_SPOINT_ZNEG)
|
|
? ((pBuf[2] >> 4) & 0x0f) - 16
|
|
: ((pBuf[2] >> 4) & 0x0f);
|
|
/* horizontal roller count */
|
|
act->dw = (pBuf[2] & MOUSE_SPOINT_WNEG)
|
|
? (pBuf[2] & 0x0f) - 16 : (pBuf[2] & 0x0f);
|
|
#endif
|
|
break;
|
|
case 0:
|
|
/* device type packet - shouldn't happen */
|
|
/* FALLTHROUGH */
|
|
default:
|
|
act->dx = act->dy = 0;
|
|
act->button = act->obutton;
|
|
debug("unknown PS2++ packet type %d: 0x%02x 0x%02x 0x%02x\n",
|
|
MOUSE_PS2PLUS_PACKET_TYPE(pBuf),
|
|
pBuf[0], pBuf[1], pBuf[2]);
|
|
break;
|
|
}
|
|
} else {
|
|
/* preserve button states */
|
|
act->button |= act->obutton & MOUSE_EXTBUTTONS;
|
|
}
|
|
break;
|
|
case MOUSE_MODEL_GLIDEPOINT:
|
|
/* `tapping' action */
|
|
act->button |= ((pBuf[0] & MOUSE_PS2_TAP)) ? 0 : MOUSE_BUTTON4DOWN;
|
|
break;
|
|
case MOUSE_MODEL_NETSCROLL:
|
|
/* three additional bytes encode buttons and wheel events */
|
|
act->button |= (pBuf[3] & MOUSE_PS2_BUTTON3DOWN)
|
|
? MOUSE_BUTTON4DOWN : 0;
|
|
act->button |= (pBuf[3] & MOUSE_PS2_BUTTON1DOWN)
|
|
? MOUSE_BUTTON5DOWN : 0;
|
|
act->dz = (pBuf[3] & MOUSE_PS2_XNEG) ? pBuf[4] - 256 : pBuf[4];
|
|
break;
|
|
case MOUSE_MODEL_THINK:
|
|
/* the fourth button state in the first byte */
|
|
act->button |= (pBuf[0] & MOUSE_PS2_TAP) ? MOUSE_BUTTON4DOWN : 0;
|
|
break;
|
|
case MOUSE_MODEL_VERSAPAD:
|
|
act->button = butmapversaps2[pBuf[0] & MOUSE_PS2VERSA_BUTTONS];
|
|
act->button |=
|
|
(pBuf[0] & MOUSE_PS2VERSA_TAP) ? MOUSE_BUTTON4DOWN : 0;
|
|
act->dx = act->dy = 0;
|
|
if (!(pBuf[0] & MOUSE_PS2VERSA_IN_USE)) {
|
|
on = FALSE;
|
|
break;
|
|
}
|
|
x = ((pBuf[4] << 8) & 0xf00) | pBuf[1];
|
|
if (x & 0x800)
|
|
x -= 0x1000;
|
|
y = ((pBuf[4] << 4) & 0xf00) | pBuf[2];
|
|
if (y & 0x800)
|
|
y -= 0x1000;
|
|
if (on) {
|
|
act->dx = prev_x - x;
|
|
act->dy = prev_y - y;
|
|
} else {
|
|
on = TRUE;
|
|
}
|
|
prev_x = x;
|
|
prev_y = y;
|
|
break;
|
|
case MOUSE_MODEL_4D:
|
|
act->dx = (pBuf[1] & 0x80) ? pBuf[1] - 256 : pBuf[1];
|
|
act->dy = (pBuf[2] & 0x80) ? -(pBuf[2] - 256) : -pBuf[2];
|
|
switch (pBuf[0] & MOUSE_4D_WHEELBITS) {
|
|
case 0x10:
|
|
act->dz = 1;
|
|
break;
|
|
case 0x30:
|
|
act->dz = -1;
|
|
break;
|
|
case 0x40: /* 2nd wheel rolling right XXX */
|
|
act->dz = 2;
|
|
break;
|
|
case 0xc0: /* 2nd wheel rolling left XXX */
|
|
act->dz = -2;
|
|
break;
|
|
}
|
|
break;
|
|
case MOUSE_MODEL_4DPLUS:
|
|
if ((act->dx < 16 - 256) && (act->dy > 256 - 16)) {
|
|
act->dx = act->dy = 0;
|
|
if (pBuf[2] & MOUSE_4DPLUS_BUTTON4DOWN)
|
|
act->button |= MOUSE_BUTTON4DOWN;
|
|
act->dz = (pBuf[2] & MOUSE_4DPLUS_ZNEG)
|
|
? ((pBuf[2] & 0x07) - 8) : (pBuf[2] & 0x07);
|
|
} else {
|
|
/* preserve previous button states */
|
|
act->button |= act->obutton & MOUSE_EXTBUTTONS;
|
|
}
|
|
break;
|
|
case MOUSE_MODEL_GENERIC:
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case MOUSE_PROTO_SYSMOUSE: /* sysmouse */
|
|
act->button = butmapmsc[(~pBuf[0]) & MOUSE_SYS_STDBUTTONS];
|
|
act->dx = (signed char)(pBuf[1]) + (signed char)(pBuf[3]);
|
|
act->dy = - ((signed char)(pBuf[2]) + (signed char)(pBuf[4]));
|
|
if (rodent.level == 1) {
|
|
act->dz = ((signed char)(pBuf[5] << 1) + (signed char)(pBuf[6] << 1)) >> 1;
|
|
act->button |= ((~pBuf[7] & MOUSE_SYS_EXTBUTTONS) << 3);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return (0);
|
|
}
|
|
/*
|
|
* We don't reset pBufP here yet, as there may be an additional data
|
|
* byte in some protocols. See above.
|
|
*/
|
|
|
|
/* has something changed? */
|
|
act->flags = ((act->dx || act->dy || act->dz) ? MOUSE_POSCHANGED : 0)
|
|
| (act->obutton ^ act->button);
|
|
|
|
return (act->flags);
|
|
}
|
|
|
|
static int
|
|
r_statetrans(mousestatus_t *a1, mousestatus_t *a2, int trans)
|
|
{
|
|
int changed;
|
|
int flags;
|
|
|
|
a2->dx = a1->dx;
|
|
a2->dy = a1->dy;
|
|
a2->dz = a1->dz;
|
|
a2->obutton = a2->button;
|
|
a2->button = a1->button;
|
|
a2->flags = a1->flags;
|
|
changed = FALSE;
|
|
|
|
if (rodent.flags & Emulate3Button) {
|
|
if (debug > 2)
|
|
debug("state:%d, trans:%d -> state:%d",
|
|
mouse_button_state, trans,
|
|
states[mouse_button_state].s[trans]);
|
|
/*
|
|
* Avoid re-ordering button and movement events. While a button
|
|
* event is deferred, throw away up to BUTTON2_MAXMOVE movement
|
|
* events to allow for mouse jitter. If more movement events
|
|
* occur, then complete the deferred button events immediately.
|
|
*/
|
|
if ((a2->dx != 0 || a2->dy != 0) &&
|
|
S_DELAYED(states[mouse_button_state].s[trans])) {
|
|
if (++mouse_move_delayed > BUTTON2_MAXMOVE) {
|
|
mouse_move_delayed = 0;
|
|
mouse_button_state =
|
|
states[mouse_button_state].s[A_TIMEOUT];
|
|
changed = TRUE;
|
|
} else
|
|
a2->dx = a2->dy = 0;
|
|
} else
|
|
mouse_move_delayed = 0;
|
|
if (mouse_button_state != states[mouse_button_state].s[trans])
|
|
changed = TRUE;
|
|
if (changed)
|
|
clock_gettime(CLOCK_MONOTONIC_FAST, &mouse_button_state_ts);
|
|
mouse_button_state = states[mouse_button_state].s[trans];
|
|
a2->button &=
|
|
~(MOUSE_BUTTON1DOWN | MOUSE_BUTTON2DOWN | MOUSE_BUTTON3DOWN);
|
|
a2->button &= states[mouse_button_state].mask;
|
|
a2->button |= states[mouse_button_state].buttons;
|
|
flags = a2->flags & MOUSE_POSCHANGED;
|
|
flags |= a2->obutton ^ a2->button;
|
|
if (flags & MOUSE_BUTTON2DOWN) {
|
|
a2->flags = flags & MOUSE_BUTTON2DOWN;
|
|
r_timestamp(a2);
|
|
}
|
|
a2->flags = flags;
|
|
}
|
|
return (changed);
|
|
}
|
|
|
|
/* phisical to logical button mapping */
|
|
static int p2l[MOUSE_MAXBUTTON] = {
|
|
MOUSE_BUTTON1DOWN, MOUSE_BUTTON2DOWN, MOUSE_BUTTON3DOWN, MOUSE_BUTTON4DOWN,
|
|
MOUSE_BUTTON5DOWN, MOUSE_BUTTON6DOWN, MOUSE_BUTTON7DOWN, MOUSE_BUTTON8DOWN,
|
|
0x00000100, 0x00000200, 0x00000400, 0x00000800,
|
|
0x00001000, 0x00002000, 0x00004000, 0x00008000,
|
|
0x00010000, 0x00020000, 0x00040000, 0x00080000,
|
|
0x00100000, 0x00200000, 0x00400000, 0x00800000,
|
|
0x01000000, 0x02000000, 0x04000000, 0x08000000,
|
|
0x10000000, 0x20000000, 0x40000000,
|
|
};
|
|
|
|
static char *
|
|
skipspace(char *s)
|
|
{
|
|
while(isspace(*s))
|
|
++s;
|
|
return (s);
|
|
}
|
|
|
|
static int
|
|
r_installmap(char *arg)
|
|
{
|
|
int pbutton;
|
|
int lbutton;
|
|
char *s;
|
|
|
|
while (*arg) {
|
|
arg = skipspace(arg);
|
|
s = arg;
|
|
while (isdigit(*arg))
|
|
++arg;
|
|
arg = skipspace(arg);
|
|
if ((arg <= s) || (*arg != '='))
|
|
return (FALSE);
|
|
lbutton = atoi(s);
|
|
|
|
arg = skipspace(++arg);
|
|
s = arg;
|
|
while (isdigit(*arg))
|
|
++arg;
|
|
if ((arg <= s) || (!isspace(*arg) && (*arg != '\0')))
|
|
return (FALSE);
|
|
pbutton = atoi(s);
|
|
|
|
if ((lbutton <= 0) || (lbutton > MOUSE_MAXBUTTON))
|
|
return (FALSE);
|
|
if ((pbutton <= 0) || (pbutton > MOUSE_MAXBUTTON))
|
|
return (FALSE);
|
|
p2l[pbutton - 1] = 1 << (lbutton - 1);
|
|
mstate[lbutton - 1] = &bstate[pbutton - 1];
|
|
}
|
|
|
|
return (TRUE);
|
|
}
|
|
|
|
static void
|
|
r_map(mousestatus_t *act1, mousestatus_t *act2)
|
|
{
|
|
register int pb;
|
|
register int pbuttons;
|
|
int lbuttons;
|
|
|
|
pbuttons = act1->button;
|
|
lbuttons = 0;
|
|
|
|
act2->obutton = act2->button;
|
|
if (pbuttons & rodent.wmode) {
|
|
pbuttons &= ~rodent.wmode;
|
|
act1->dz = act1->dy;
|
|
act1->dx = 0;
|
|
act1->dy = 0;
|
|
}
|
|
act2->dx = act1->dx;
|
|
act2->dy = act1->dy;
|
|
act2->dz = act1->dz;
|
|
|
|
switch (rodent.zmap[0]) {
|
|
case 0: /* do nothing */
|
|
break;
|
|
case MOUSE_XAXIS:
|
|
if (act1->dz != 0) {
|
|
act2->dx = act1->dz;
|
|
act2->dz = 0;
|
|
}
|
|
break;
|
|
case MOUSE_YAXIS:
|
|
if (act1->dz != 0) {
|
|
act2->dy = act1->dz;
|
|
act2->dz = 0;
|
|
}
|
|
break;
|
|
default: /* buttons */
|
|
pbuttons &= ~(rodent.zmap[0] | rodent.zmap[1]
|
|
| rodent.zmap[2] | rodent.zmap[3]);
|
|
if ((act1->dz < -1) && rodent.zmap[2]) {
|
|
pbuttons |= rodent.zmap[2];
|
|
zstate[2].count = 1;
|
|
} else if (act1->dz < 0) {
|
|
pbuttons |= rodent.zmap[0];
|
|
zstate[0].count = 1;
|
|
} else if ((act1->dz > 1) && rodent.zmap[3]) {
|
|
pbuttons |= rodent.zmap[3];
|
|
zstate[3].count = 1;
|
|
} else if (act1->dz > 0) {
|
|
pbuttons |= rodent.zmap[1];
|
|
zstate[1].count = 1;
|
|
}
|
|
act2->dz = 0;
|
|
break;
|
|
}
|
|
|
|
for (pb = 0; (pb < MOUSE_MAXBUTTON) && (pbuttons != 0); ++pb) {
|
|
lbuttons |= (pbuttons & 1) ? p2l[pb] : 0;
|
|
pbuttons >>= 1;
|
|
}
|
|
act2->button = lbuttons;
|
|
|
|
act2->flags = ((act2->dx || act2->dy || act2->dz) ? MOUSE_POSCHANGED : 0)
|
|
| (act2->obutton ^ act2->button);
|
|
}
|
|
|
|
static void
|
|
r_timestamp(mousestatus_t *act)
|
|
{
|
|
struct timespec ts;
|
|
struct timespec ts1;
|
|
struct timespec ts2;
|
|
struct timespec ts3;
|
|
int button;
|
|
int mask;
|
|
int i;
|
|
|
|
mask = act->flags & MOUSE_BUTTONS;
|
|
#if 0
|
|
if (mask == 0)
|
|
return;
|
|
#endif
|
|
|
|
clock_gettime(CLOCK_MONOTONIC_FAST, &ts1);
|
|
drift_current_ts = ts1;
|
|
|
|
/* double click threshold */
|
|
ts2.tv_sec = rodent.clickthreshold / 1000;
|
|
ts2.tv_nsec = (rodent.clickthreshold % 1000) * 1000000;
|
|
tssub(&ts1, &ts2, &ts);
|
|
debug("ts: %jd %ld", (intmax_t)ts.tv_sec, ts.tv_nsec);
|
|
|
|
/* 3 button emulation timeout */
|
|
ts2.tv_sec = rodent.button2timeout / 1000;
|
|
ts2.tv_nsec = (rodent.button2timeout % 1000) * 1000000;
|
|
tssub(&ts1, &ts2, &ts3);
|
|
|
|
button = MOUSE_BUTTON1DOWN;
|
|
for (i = 0; (i < MOUSE_MAXBUTTON) && (mask != 0); ++i) {
|
|
if (mask & 1) {
|
|
if (act->button & button) {
|
|
/* the button is down */
|
|
debug(" : %jd %ld",
|
|
(intmax_t)bstate[i].ts.tv_sec, bstate[i].ts.tv_nsec);
|
|
if (tscmp(&ts, &bstate[i].ts, >)) {
|
|
bstate[i].count = 1;
|
|
} else {
|
|
++bstate[i].count;
|
|
}
|
|
bstate[i].ts = ts1;
|
|
} else {
|
|
/* the button is up */
|
|
bstate[i].ts = ts1;
|
|
}
|
|
} else {
|
|
if (act->button & button) {
|
|
/* the button has been down */
|
|
if (tscmp(&ts3, &bstate[i].ts, >)) {
|
|
bstate[i].count = 1;
|
|
bstate[i].ts = ts1;
|
|
act->flags |= button;
|
|
debug("button %d timeout", i + 1);
|
|
}
|
|
} else {
|
|
/* the button has been up */
|
|
}
|
|
}
|
|
button <<= 1;
|
|
mask >>= 1;
|
|
}
|
|
}
|
|
|
|
static int
|
|
r_timeout(void)
|
|
{
|
|
struct timespec ts;
|
|
struct timespec ts1;
|
|
struct timespec ts2;
|
|
|
|
if (states[mouse_button_state].timeout)
|
|
return (TRUE);
|
|
clock_gettime(CLOCK_MONOTONIC_FAST, &ts1);
|
|
ts2.tv_sec = rodent.button2timeout / 1000;
|
|
ts2.tv_nsec = (rodent.button2timeout % 1000) * 1000000;
|
|
tssub(&ts1, &ts2, &ts);
|
|
return (tscmp(&ts, &mouse_button_state_ts, >));
|
|
}
|
|
|
|
static void
|
|
r_click(mousestatus_t *act)
|
|
{
|
|
struct mouse_info mouse;
|
|
int button;
|
|
int mask;
|
|
int i;
|
|
|
|
mask = act->flags & MOUSE_BUTTONS;
|
|
if (mask == 0)
|
|
return;
|
|
|
|
button = MOUSE_BUTTON1DOWN;
|
|
for (i = 0; (i < MOUSE_MAXBUTTON) && (mask != 0); ++i) {
|
|
if (mask & 1) {
|
|
debug("mstate[%d]->count:%d", i, mstate[i]->count);
|
|
if (act->button & button) {
|
|
/* the button is down */
|
|
mouse.u.event.value = mstate[i]->count;
|
|
} else {
|
|
/* the button is up */
|
|
mouse.u.event.value = 0;
|
|
}
|
|
mouse.operation = MOUSE_BUTTON_EVENT;
|
|
mouse.u.event.id = button;
|
|
if (debug < 2)
|
|
if (!paused)
|
|
ioctl(rodent.cfd, CONS_MOUSECTL, &mouse);
|
|
debug("button %d count %d", i + 1, mouse.u.event.value);
|
|
}
|
|
button <<= 1;
|
|
mask >>= 1;
|
|
}
|
|
}
|
|
|
|
/* $XConsortium: posix_tty.c,v 1.3 95/01/05 20:42:55 kaleb Exp $ */
|
|
/* $XFree86: xc/programs/Xserver/hw/xfree86/os-support/shared/posix_tty.c,v 3.4 1995/01/28 17:05:03 dawes Exp $ */
|
|
/*
|
|
* Copyright 1993 by David Dawes <dawes@physics.su.oz.au>
|
|
*
|
|
* Permission to use, copy, modify, distribute, and sell this software and its
|
|
* documentation for any purpose is hereby granted without fee, provided that
|
|
* the above copyright notice appear in all copies and that both that
|
|
* copyright notice and this permission notice appear in supporting
|
|
* documentation, and that the name of David Dawes
|
|
* not be used in advertising or publicity pertaining to distribution of
|
|
* the software without specific, written prior permission.
|
|
* David Dawes makes no representations about the suitability of this
|
|
* software for any purpose. It is provided "as is" without express or
|
|
* implied warranty.
|
|
*
|
|
* DAVID DAWES DISCLAIMS ALL WARRANTIES WITH REGARD TO
|
|
* THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND
|
|
* FITNESS, IN NO EVENT SHALL DAVID DAWES BE LIABLE FOR
|
|
* ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER
|
|
* RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF
|
|
* CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
|
|
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
|
|
static void
|
|
setmousespeed(int old, int new, unsigned cflag)
|
|
{
|
|
struct termios tty;
|
|
const char *c;
|
|
|
|
if (tcgetattr(rodent.mfd, &tty) < 0)
|
|
{
|
|
logwarn("unable to get status of mouse fd");
|
|
return;
|
|
}
|
|
|
|
tty.c_iflag = IGNBRK | IGNPAR;
|
|
tty.c_oflag = 0;
|
|
tty.c_lflag = 0;
|
|
tty.c_cflag = (tcflag_t)cflag;
|
|
tty.c_cc[VTIME] = 0;
|
|
tty.c_cc[VMIN] = 1;
|
|
|
|
switch (old)
|
|
{
|
|
case 9600:
|
|
cfsetispeed(&tty, B9600);
|
|
cfsetospeed(&tty, B9600);
|
|
break;
|
|
case 4800:
|
|
cfsetispeed(&tty, B4800);
|
|
cfsetospeed(&tty, B4800);
|
|
break;
|
|
case 2400:
|
|
cfsetispeed(&tty, B2400);
|
|
cfsetospeed(&tty, B2400);
|
|
break;
|
|
case 1200:
|
|
default:
|
|
cfsetispeed(&tty, B1200);
|
|
cfsetospeed(&tty, B1200);
|
|
}
|
|
|
|
if (tcsetattr(rodent.mfd, TCSADRAIN, &tty) < 0)
|
|
{
|
|
logwarn("unable to set status of mouse fd");
|
|
return;
|
|
}
|
|
|
|
switch (new)
|
|
{
|
|
case 9600:
|
|
c = "*q";
|
|
cfsetispeed(&tty, B9600);
|
|
cfsetospeed(&tty, B9600);
|
|
break;
|
|
case 4800:
|
|
c = "*p";
|
|
cfsetispeed(&tty, B4800);
|
|
cfsetospeed(&tty, B4800);
|
|
break;
|
|
case 2400:
|
|
c = "*o";
|
|
cfsetispeed(&tty, B2400);
|
|
cfsetospeed(&tty, B2400);
|
|
break;
|
|
case 1200:
|
|
default:
|
|
c = "*n";
|
|
cfsetispeed(&tty, B1200);
|
|
cfsetospeed(&tty, B1200);
|
|
}
|
|
|
|
if (rodent.rtype == MOUSE_PROTO_LOGIMOUSEMAN
|
|
|| rodent.rtype == MOUSE_PROTO_LOGI)
|
|
{
|
|
if (write(rodent.mfd, c, 2) != 2)
|
|
{
|
|
logwarn("unable to write to mouse fd");
|
|
return;
|
|
}
|
|
}
|
|
usleep(100000);
|
|
|
|
if (tcsetattr(rodent.mfd, TCSADRAIN, &tty) < 0)
|
|
logwarn("unable to set status of mouse fd");
|
|
}
|
|
|
|
/*
|
|
* PnP COM device support
|
|
*
|
|
* It's a simplistic implementation, but it works :-)
|
|
* KY, 31/7/97.
|
|
*/
|
|
|
|
/*
|
|
* Try to elicit a PnP ID as described in
|
|
* Microsoft, Hayes: "Plug and Play External COM Device Specification,
|
|
* rev 1.00", 1995.
|
|
*
|
|
* The routine does not fully implement the COM Enumerator as par Section
|
|
* 2.1 of the document. In particular, we don't have idle state in which
|
|
* the driver software monitors the com port for dynamic connection or
|
|
* removal of a device at the port, because `moused' simply quits if no
|
|
* device is found.
|
|
*
|
|
* In addition, as PnP COM device enumeration procedure slightly has
|
|
* changed since its first publication, devices which follow earlier
|
|
* revisions of the above spec. may fail to respond if the rev 1.0
|
|
* procedure is used. XXX
|
|
*/
|
|
static int
|
|
pnpwakeup1(void)
|
|
{
|
|
struct timeval timeout;
|
|
fd_set fds;
|
|
int i;
|
|
|
|
/*
|
|
* This is the procedure described in rev 1.0 of PnP COM device spec.
|
|
* Unfortunately, some devices which comform to earlier revisions of
|
|
* the spec gets confused and do not return the ID string...
|
|
*/
|
|
debug("PnP COM device rev 1.0 probe...");
|
|
|
|
/* port initialization (2.1.2) */
|
|
ioctl(rodent.mfd, TIOCMGET, &i);
|
|
i |= TIOCM_DTR; /* DTR = 1 */
|
|
i &= ~TIOCM_RTS; /* RTS = 0 */
|
|
ioctl(rodent.mfd, TIOCMSET, &i);
|
|
usleep(240000);
|
|
|
|
/*
|
|
* The PnP COM device spec. dictates that the mouse must set DSR
|
|
* in response to DTR (by hardware or by software) and that if DSR is
|
|
* not asserted, the host computer should think that there is no device
|
|
* at this serial port. But some mice just don't do that...
|
|
*/
|
|
ioctl(rodent.mfd, TIOCMGET, &i);
|
|
debug("modem status 0%o", i);
|
|
if ((i & TIOCM_DSR) == 0)
|
|
return (FALSE);
|
|
|
|
/* port setup, 1st phase (2.1.3) */
|
|
setmousespeed(1200, 1200, (CS7 | CREAD | CLOCAL | HUPCL));
|
|
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 0, RTS = 0 */
|
|
ioctl(rodent.mfd, TIOCMBIC, &i);
|
|
usleep(240000);
|
|
i = TIOCM_DTR; /* DTR = 1, RTS = 0 */
|
|
ioctl(rodent.mfd, TIOCMBIS, &i);
|
|
usleep(240000);
|
|
|
|
/* wait for response, 1st phase (2.1.4) */
|
|
i = FREAD;
|
|
ioctl(rodent.mfd, TIOCFLUSH, &i);
|
|
i = TIOCM_RTS; /* DTR = 1, RTS = 1 */
|
|
ioctl(rodent.mfd, TIOCMBIS, &i);
|
|
|
|
/* try to read something */
|
|
FD_ZERO(&fds);
|
|
FD_SET(rodent.mfd, &fds);
|
|
timeout.tv_sec = 0;
|
|
timeout.tv_usec = 240000;
|
|
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) > 0) {
|
|
debug("pnpwakeup1(): valid response in first phase.");
|
|
return (TRUE);
|
|
}
|
|
|
|
/* port setup, 2nd phase (2.1.5) */
|
|
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 0, RTS = 0 */
|
|
ioctl(rodent.mfd, TIOCMBIC, &i);
|
|
usleep(240000);
|
|
|
|
/* wait for respose, 2nd phase (2.1.6) */
|
|
i = FREAD;
|
|
ioctl(rodent.mfd, TIOCFLUSH, &i);
|
|
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */
|
|
ioctl(rodent.mfd, TIOCMBIS, &i);
|
|
|
|
/* try to read something */
|
|
FD_ZERO(&fds);
|
|
FD_SET(rodent.mfd, &fds);
|
|
timeout.tv_sec = 0;
|
|
timeout.tv_usec = 240000;
|
|
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) > 0) {
|
|
debug("pnpwakeup1(): valid response in second phase.");
|
|
return (TRUE);
|
|
}
|
|
|
|
return (FALSE);
|
|
}
|
|
|
|
static int
|
|
pnpwakeup2(void)
|
|
{
|
|
struct timeval timeout;
|
|
fd_set fds;
|
|
int i;
|
|
|
|
/*
|
|
* This is a simplified procedure; it simply toggles RTS.
|
|
*/
|
|
debug("alternate probe...");
|
|
|
|
ioctl(rodent.mfd, TIOCMGET, &i);
|
|
i |= TIOCM_DTR; /* DTR = 1 */
|
|
i &= ~TIOCM_RTS; /* RTS = 0 */
|
|
ioctl(rodent.mfd, TIOCMSET, &i);
|
|
usleep(240000);
|
|
|
|
setmousespeed(1200, 1200, (CS7 | CREAD | CLOCAL | HUPCL));
|
|
|
|
/* wait for respose */
|
|
i = FREAD;
|
|
ioctl(rodent.mfd, TIOCFLUSH, &i);
|
|
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */
|
|
ioctl(rodent.mfd, TIOCMBIS, &i);
|
|
|
|
/* try to read something */
|
|
FD_ZERO(&fds);
|
|
FD_SET(rodent.mfd, &fds);
|
|
timeout.tv_sec = 0;
|
|
timeout.tv_usec = 240000;
|
|
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) > 0) {
|
|
debug("pnpwakeup2(): valid response.");
|
|
return (TRUE);
|
|
}
|
|
|
|
return (FALSE);
|
|
}
|
|
|
|
static int
|
|
pnpgets(char *buf)
|
|
{
|
|
struct timeval timeout;
|
|
fd_set fds;
|
|
int begin;
|
|
int i;
|
|
char c;
|
|
|
|
if (!pnpwakeup1() && !pnpwakeup2()) {
|
|
/*
|
|
* According to PnP spec, we should set DTR = 1 and RTS = 0 while
|
|
* in idle state. But, `moused' shall set DTR = RTS = 1 and proceed,
|
|
* assuming there is something at the port even if it didn't
|
|
* respond to the PnP enumeration procedure.
|
|
*/
|
|
i = TIOCM_DTR | TIOCM_RTS; /* DTR = 1, RTS = 1 */
|
|
ioctl(rodent.mfd, TIOCMBIS, &i);
|
|
return (0);
|
|
}
|
|
|
|
/* collect PnP COM device ID (2.1.7) */
|
|
begin = -1;
|
|
i = 0;
|
|
usleep(240000); /* the mouse must send `Begin ID' within 200msec */
|
|
while (read(rodent.mfd, &c, 1) == 1) {
|
|
/* we may see "M", or "M3..." before `Begin ID' */
|
|
buf[i++] = c;
|
|
if ((c == 0x08) || (c == 0x28)) { /* Begin ID */
|
|
debug("begin-id %02x", c);
|
|
begin = i - 1;
|
|
break;
|
|
}
|
|
debug("%c %02x", c, c);
|
|
if (i >= 256)
|
|
break;
|
|
}
|
|
if (begin < 0) {
|
|
/* we haven't seen `Begin ID' in time... */
|
|
goto connect_idle;
|
|
}
|
|
|
|
++c; /* make it `End ID' */
|
|
for (;;) {
|
|
FD_ZERO(&fds);
|
|
FD_SET(rodent.mfd, &fds);
|
|
timeout.tv_sec = 0;
|
|
timeout.tv_usec = 240000;
|
|
if (select(FD_SETSIZE, &fds, NULL, NULL, &timeout) <= 0)
|
|
break;
|
|
|
|
read(rodent.mfd, &buf[i], 1);
|
|
if (buf[i++] == c) /* End ID */
|
|
break;
|
|
if (i >= 256)
|
|
break;
|
|
}
|
|
if (begin > 0) {
|
|
i -= begin;
|
|
bcopy(&buf[begin], &buf[0], i);
|
|
}
|
|
/* string may not be human readable... */
|
|
debug("len:%d, '%-*.*s'", i, i, i, buf);
|
|
|
|
if (buf[i - 1] == c)
|
|
return (i); /* a valid PnP string */
|
|
|
|
/*
|
|
* According to PnP spec, we should set DTR = 1 and RTS = 0 while
|
|
* in idle state. But, `moused' shall leave the modem control lines
|
|
* as they are. See above.
|
|
*/
|
|
connect_idle:
|
|
|
|
/* we may still have something in the buffer */
|
|
return ((i > 0) ? i : 0);
|
|
}
|
|
|
|
static int
|
|
pnpparse(pnpid_t *id, char *buf, int len)
|
|
{
|
|
char s[3];
|
|
int offset;
|
|
int sum = 0;
|
|
int i, j;
|
|
|
|
id->revision = 0;
|
|
id->eisaid = NULL;
|
|
id->serial = NULL;
|
|
id->class = NULL;
|
|
id->compat = NULL;
|
|
id->description = NULL;
|
|
id->neisaid = 0;
|
|
id->nserial = 0;
|
|
id->nclass = 0;
|
|
id->ncompat = 0;
|
|
id->ndescription = 0;
|
|
|
|
if ((buf[0] != 0x28) && (buf[0] != 0x08)) {
|
|
/* non-PnP mice */
|
|
switch(buf[0]) {
|
|
default:
|
|
return (FALSE);
|
|
case 'M': /* Microsoft */
|
|
id->eisaid = "PNP0F01";
|
|
break;
|
|
case 'H': /* MouseSystems */
|
|
id->eisaid = "PNP0F04";
|
|
break;
|
|
}
|
|
id->neisaid = strlen(id->eisaid);
|
|
id->class = "MOUSE";
|
|
id->nclass = strlen(id->class);
|
|
debug("non-PnP mouse '%c'", buf[0]);
|
|
return (TRUE);
|
|
}
|
|
|
|
/* PnP mice */
|
|
offset = 0x28 - buf[0];
|
|
|
|
/* calculate checksum */
|
|
for (i = 0; i < len - 3; ++i) {
|
|
sum += buf[i];
|
|
buf[i] += offset;
|
|
}
|
|
sum += buf[len - 1];
|
|
for (; i < len; ++i)
|
|
buf[i] += offset;
|
|
debug("PnP ID string: '%*.*s'", len, len, buf);
|
|
|
|
/* revision */
|
|
buf[1] -= offset;
|
|
buf[2] -= offset;
|
|
id->revision = ((buf[1] & 0x3f) << 6) | (buf[2] & 0x3f);
|
|
debug("PnP rev %d.%02d", id->revision / 100, id->revision % 100);
|
|
|
|
/* EISA vender and product ID */
|
|
id->eisaid = &buf[3];
|
|
id->neisaid = 7;
|
|
|
|
/* option strings */
|
|
i = 10;
|
|
if (buf[i] == '\\') {
|
|
/* device serial # */
|
|
for (j = ++i; i < len; ++i) {
|
|
if (buf[i] == '\\')
|
|
break;
|
|
}
|
|
if (i >= len)
|
|
i -= 3;
|
|
if (i - j == 8) {
|
|
id->serial = &buf[j];
|
|
id->nserial = 8;
|
|
}
|
|
}
|
|
if (buf[i] == '\\') {
|
|
/* PnP class */
|
|
for (j = ++i; i < len; ++i) {
|
|
if (buf[i] == '\\')
|
|
break;
|
|
}
|
|
if (i >= len)
|
|
i -= 3;
|
|
if (i > j + 1) {
|
|
id->class = &buf[j];
|
|
id->nclass = i - j;
|
|
}
|
|
}
|
|
if (buf[i] == '\\') {
|
|
/* compatible driver */
|
|
for (j = ++i; i < len; ++i) {
|
|
if (buf[i] == '\\')
|
|
break;
|
|
}
|
|
/*
|
|
* PnP COM spec prior to v0.96 allowed '*' in this field,
|
|
* it's not allowed now; just igore it.
|
|
*/
|
|
if (buf[j] == '*')
|
|
++j;
|
|
if (i >= len)
|
|
i -= 3;
|
|
if (i > j + 1) {
|
|
id->compat = &buf[j];
|
|
id->ncompat = i - j;
|
|
}
|
|
}
|
|
if (buf[i] == '\\') {
|
|
/* product description */
|
|
for (j = ++i; i < len; ++i) {
|
|
if (buf[i] == ';')
|
|
break;
|
|
}
|
|
if (i >= len)
|
|
i -= 3;
|
|
if (i > j + 1) {
|
|
id->description = &buf[j];
|
|
id->ndescription = i - j;
|
|
}
|
|
}
|
|
|
|
/* checksum exists if there are any optional fields */
|
|
if ((id->nserial > 0) || (id->nclass > 0)
|
|
|| (id->ncompat > 0) || (id->ndescription > 0)) {
|
|
debug("PnP checksum: 0x%X", sum);
|
|
sprintf(s, "%02X", sum & 0x0ff);
|
|
if (strncmp(s, &buf[len - 3], 2) != 0) {
|
|
#if 0
|
|
/*
|
|
* I found some mice do not comply with the PnP COM device
|
|
* spec regarding checksum... XXX
|
|
*/
|
|
logwarnx("PnP checksum error", 0);
|
|
return (FALSE);
|
|
#endif
|
|
}
|
|
}
|
|
|
|
return (TRUE);
|
|
}
|
|
|
|
static symtab_t *
|
|
pnpproto(pnpid_t *id)
|
|
{
|
|
symtab_t *t;
|
|
int i, j;
|
|
|
|
if (id->nclass > 0)
|
|
if (strncmp(id->class, "MOUSE", id->nclass) != 0 &&
|
|
strncmp(id->class, "TABLET", id->nclass) != 0)
|
|
/* this is not a mouse! */
|
|
return (NULL);
|
|
|
|
if (id->neisaid > 0) {
|
|
t = gettoken(pnpprod, id->eisaid, id->neisaid);
|
|
if (t->val != MOUSE_PROTO_UNKNOWN)
|
|
return (t);
|
|
}
|
|
|
|
/*
|
|
* The 'Compatible drivers' field may contain more than one
|
|
* ID separated by ','.
|
|
*/
|
|
if (id->ncompat <= 0)
|
|
return (NULL);
|
|
for (i = 0; i < id->ncompat; ++i) {
|
|
for (j = i; id->compat[i] != ','; ++i)
|
|
if (i >= id->ncompat)
|
|
break;
|
|
if (i > j) {
|
|
t = gettoken(pnpprod, id->compat + j, i - j);
|
|
if (t->val != MOUSE_PROTO_UNKNOWN)
|
|
return (t);
|
|
}
|
|
}
|
|
|
|
return (NULL);
|
|
}
|
|
|
|
/* name/val mapping */
|
|
|
|
static symtab_t *
|
|
gettoken(symtab_t *tab, const char *s, int len)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; tab[i].name != NULL; ++i) {
|
|
if (strncmp(tab[i].name, s, len) == 0)
|
|
break;
|
|
}
|
|
return (&tab[i]);
|
|
}
|
|
|
|
static const char *
|
|
gettokenname(symtab_t *tab, int val)
|
|
{
|
|
static const char unknown[] = "unknown";
|
|
int i;
|
|
|
|
for (i = 0; tab[i].name != NULL; ++i) {
|
|
if (tab[i].val == val)
|
|
return (tab[i].name);
|
|
}
|
|
return (unknown);
|
|
}
|
|
|
|
|
|
/*
|
|
* code to read from the Genius Kidspad tablet.
|
|
|
|
The tablet responds to the COM PnP protocol 1.0 with EISA-ID KYE0005,
|
|
and to pre-pnp probes (RTS toggle) with 'T' (tablet ?)
|
|
9600, 8 bit, parity odd.
|
|
|
|
The tablet puts out 5 bytes. b0 (mask 0xb8, value 0xb8) contains
|
|
the proximity, tip and button info:
|
|
(byte0 & 0x1) true = tip pressed
|
|
(byte0 & 0x2) true = button pressed
|
|
(byte0 & 0x40) false = pen in proximity of tablet.
|
|
|
|
The next 4 bytes are used for coordinates xl, xh, yl, yh (7 bits valid).
|
|
|
|
Only absolute coordinates are returned, so we use the following approach:
|
|
we store the last coordinates sent when the pen went out of the tablet,
|
|
|
|
|
|
*
|
|
*/
|
|
|
|
typedef enum {
|
|
S_IDLE, S_PROXY, S_FIRST, S_DOWN, S_UP
|
|
} k_status;
|
|
|
|
static int
|
|
kidspad(u_char rxc, mousestatus_t *act)
|
|
{
|
|
static int buf[5];
|
|
static int buflen = 0, b_prev = 0 , x_prev = -1, y_prev = -1;
|
|
static k_status status = S_IDLE;
|
|
static struct timespec now;
|
|
|
|
int x, y;
|
|
|
|
if (buflen > 0 && (rxc & 0x80)) {
|
|
fprintf(stderr, "invalid code %d 0x%x\n", buflen, rxc);
|
|
buflen = 0;
|
|
}
|
|
if (buflen == 0 && (rxc & 0xb8) != 0xb8) {
|
|
fprintf(stderr, "invalid code 0 0x%x\n", rxc);
|
|
return (0); /* invalid code, no action */
|
|
}
|
|
buf[buflen++] = rxc;
|
|
if (buflen < 5)
|
|
return (0);
|
|
|
|
buflen = 0; /* for next time... */
|
|
|
|
x = buf[1]+128*(buf[2] - 7);
|
|
if (x < 0) x = 0;
|
|
y = 28*128 - (buf[3] + 128* (buf[4] - 7));
|
|
if (y < 0) y = 0;
|
|
|
|
x /= 8;
|
|
y /= 8;
|
|
|
|
act->flags = 0;
|
|
act->obutton = act->button;
|
|
act->dx = act->dy = act->dz = 0;
|
|
clock_gettime(CLOCK_MONOTONIC_FAST, &now);
|
|
if (buf[0] & 0x40) /* pen went out of reach */
|
|
status = S_IDLE;
|
|
else if (status == S_IDLE) { /* pen is newly near the tablet */
|
|
act->flags |= MOUSE_POSCHANGED; /* force update */
|
|
status = S_PROXY;
|
|
x_prev = x;
|
|
y_prev = y;
|
|
}
|
|
act->dx = x - x_prev;
|
|
act->dy = y - y_prev;
|
|
if (act->dx || act->dy)
|
|
act->flags |= MOUSE_POSCHANGED;
|
|
x_prev = x;
|
|
y_prev = y;
|
|
if (b_prev != 0 && b_prev != buf[0]) { /* possibly record button change */
|
|
act->button = 0;
|
|
if (buf[0] & 0x01) /* tip pressed */
|
|
act->button |= MOUSE_BUTTON1DOWN;
|
|
if (buf[0] & 0x02) /* button pressed */
|
|
act->button |= MOUSE_BUTTON2DOWN;
|
|
act->flags |= MOUSE_BUTTONSCHANGED;
|
|
}
|
|
b_prev = buf[0];
|
|
return (act->flags);
|
|
}
|
|
|
|
static int
|
|
gtco_digipad (u_char rxc, mousestatus_t *act)
|
|
{
|
|
static u_char buf[5];
|
|
static int buflen = 0, b_prev = 0 , x_prev = -1, y_prev = -1;
|
|
static k_status status = S_IDLE;
|
|
int x, y;
|
|
|
|
#define GTCO_HEADER 0x80
|
|
#define GTCO_PROXIMITY 0x40
|
|
#define GTCO_START (GTCO_HEADER|GTCO_PROXIMITY)
|
|
#define GTCO_BUTTONMASK 0x3c
|
|
|
|
|
|
if (buflen > 0 && ((rxc & GTCO_HEADER) != GTCO_HEADER)) {
|
|
fprintf(stderr, "invalid code %d 0x%x\n", buflen, rxc);
|
|
buflen = 0;
|
|
}
|
|
if (buflen == 0 && (rxc & GTCO_START) != GTCO_START) {
|
|
fprintf(stderr, "invalid code 0 0x%x\n", rxc);
|
|
return (0); /* invalid code, no action */
|
|
}
|
|
|
|
buf[buflen++] = rxc;
|
|
if (buflen < 5)
|
|
return (0);
|
|
|
|
buflen = 0; /* for next time... */
|
|
|
|
x = ((buf[2] & ~GTCO_START) << 6 | (buf[1] & ~GTCO_START));
|
|
y = 4768 - ((buf[4] & ~GTCO_START) << 6 | (buf[3] & ~GTCO_START));
|
|
|
|
x /= 2.5;
|
|
y /= 2.5;
|
|
|
|
act->flags = 0;
|
|
act->obutton = act->button;
|
|
act->dx = act->dy = act->dz = 0;
|
|
|
|
if ((buf[0] & 0x40) == 0) /* pen went out of reach */
|
|
status = S_IDLE;
|
|
else if (status == S_IDLE) { /* pen is newly near the tablet */
|
|
act->flags |= MOUSE_POSCHANGED; /* force update */
|
|
status = S_PROXY;
|
|
x_prev = x;
|
|
y_prev = y;
|
|
}
|
|
|
|
act->dx = x - x_prev;
|
|
act->dy = y - y_prev;
|
|
if (act->dx || act->dy)
|
|
act->flags |= MOUSE_POSCHANGED;
|
|
x_prev = x;
|
|
y_prev = y;
|
|
|
|
/* possibly record button change */
|
|
if (b_prev != 0 && b_prev != buf[0]) {
|
|
act->button = 0;
|
|
if (buf[0] & 0x04) {
|
|
/* tip pressed/yellow */
|
|
act->button |= MOUSE_BUTTON1DOWN;
|
|
}
|
|
if (buf[0] & 0x08) {
|
|
/* grey/white */
|
|
act->button |= MOUSE_BUTTON2DOWN;
|
|
}
|
|
if (buf[0] & 0x10) {
|
|
/* black/green */
|
|
act->button |= MOUSE_BUTTON3DOWN;
|
|
}
|
|
if (buf[0] & 0x20) {
|
|
/* tip+grey/blue */
|
|
act->button |= MOUSE_BUTTON4DOWN;
|
|
}
|
|
act->flags |= MOUSE_BUTTONSCHANGED;
|
|
}
|
|
b_prev = buf[0];
|
|
return (act->flags);
|
|
}
|
|
|
|
static void
|
|
mremote_serversetup(void)
|
|
{
|
|
struct sockaddr_un ad;
|
|
|
|
/* Open a UNIX domain stream socket to listen for mouse remote clients */
|
|
unlink(_PATH_MOUSEREMOTE);
|
|
|
|
if ((rodent.mremsfd = socket(AF_UNIX, SOCK_STREAM, 0)) < 0)
|
|
logerrx(1, "unable to create unix domain socket %s",_PATH_MOUSEREMOTE);
|
|
|
|
umask(0111);
|
|
|
|
bzero(&ad, sizeof(ad));
|
|
ad.sun_family = AF_UNIX;
|
|
strcpy(ad.sun_path, _PATH_MOUSEREMOTE);
|
|
#ifndef SUN_LEN
|
|
#define SUN_LEN(unp) (((char *)(unp)->sun_path - (char *)(unp)) + \
|
|
strlen((unp)->path))
|
|
#endif
|
|
if (bind(rodent.mremsfd, (struct sockaddr *) &ad, SUN_LEN(&ad)) < 0)
|
|
logerrx(1, "unable to bind unix domain socket %s", _PATH_MOUSEREMOTE);
|
|
|
|
listen(rodent.mremsfd, 1);
|
|
}
|
|
|
|
static void
|
|
mremote_clientchg(int add)
|
|
{
|
|
struct sockaddr_un ad;
|
|
socklen_t ad_len;
|
|
int fd;
|
|
|
|
if (rodent.rtype != MOUSE_PROTO_X10MOUSEREM)
|
|
return;
|
|
|
|
if (add) {
|
|
/* Accept client connection, if we don't already have one */
|
|
ad_len = sizeof(ad);
|
|
fd = accept(rodent.mremsfd, (struct sockaddr *) &ad, &ad_len);
|
|
if (fd < 0)
|
|
logwarnx("failed accept on mouse remote socket");
|
|
|
|
if (rodent.mremcfd < 0) {
|
|
rodent.mremcfd = fd;
|
|
debug("remote client connect...accepted");
|
|
}
|
|
else {
|
|
close(fd);
|
|
debug("another remote client connect...disconnected");
|
|
}
|
|
}
|
|
else {
|
|
/* Client disconnected */
|
|
debug("remote client disconnected");
|
|
close(rodent.mremcfd);
|
|
rodent.mremcfd = -1;
|
|
}
|
|
}
|