1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-19 10:53:58 +00:00
freebsd/sys/dev/ic/i8259.h
Gleb Smirnoff 21314694fb Typo.
PR:		misc/87679
Submitted by:	Alan Amesbury <amesbury umn.edu>
2005-10-23 09:05:51 +00:00

87 lines
3.5 KiB
C

/*-
* Copyright (c) 2003 Peter Wemm
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Register defintions for the i8259A programmable interrupt controller.
*/
#ifndef _DEV_IC_I8259_H_
#define _DEV_IC_I8259_H_
/* Initialization control word 1. Written to even address. */
#define ICW1_IC4 0x01 /* ICW4 present */
#define ICW1_SNGL 0x02 /* 1 = single, 0 = cascaded */
#define ICW1_ADI 0x04 /* 1 = 4, 0 = 8 byte vectors */
#define ICW1_LTIM 0x08 /* 1 = level trigger, 0 = edge */
#define ICW1_RESET 0x10 /* must be 1 */
/* 0x20 - 0x80 - in 8080/8085 mode only */
/* Initialization control word 2. Written to the odd address. */
/* No definitions, it is the base vector of the IDT for 8086 mode */
/* Initialization control word 3. Written to the odd address. */
/* For a master PIC, bitfield indicating a slave 8259 on given input */
/* For slave, lower 3 bits are the slave's ID binary id on master */
/* Initialization control word 4. Written to the odd address. */
#define ICW4_8086 0x01 /* 1 = 8086, 0 = 8080 */
#define ICW4_AEOI 0x02 /* 1 = Auto EOI */
#define ICW4_MS 0x04 /* 1 = buffered master, 0 = slave */
#define ICW4_BUF 0x08 /* 1 = enable buffer mode */
#define ICW4_SFNM 0x10 /* 1 = special fully nested mode */
/* Operation control words. Written after initialization. */
/* Operation control word type 1 */
/*
* No definitions. Written to the odd address. Bitmask for interrupts.
* 1 = disabled.
*/
/* Operation control word type 2. Bit 3 (0x08) must be zero. Even address. */
#define OCW2_L0 0x01 /* Level */
#define OCW2_L1 0x02
#define OCW2_L2 0x04
/* 0x08 must be 0 to select OCW2 vs OCW3 */
/* 0x10 must be 0 to select OCW2 vs ICW1 */
#define OCW2_EOI 0x20 /* 1 = EOI */
#define OCW2_SL 0x40 /* EOI mode */
#define OCW2_R 0x80 /* EOI mode */
/* Operation control word type 3. Bit 3 (0x08) must be set. Even address. */
#define OCW3_RIS 0x01 /* 1 = read IS, 0 = read IR */
#define OCW3_RR 0x02 /* register read */
#define OCW3_P 0x04 /* poll mode command */
/* 0x08 must be 1 to select OCW3 vs OCW2 */
#define OCW3_SEL 0x08 /* must be 1 */
/* 0x10 must be 0 to select OCW3 vs ICW1 */
#define OCW3_SMM 0x20 /* special mode mask */
#define OCW3_ESMM 0x40 /* enable SMM */
#endif /* !_DEV_IC_I8259_H_ */