1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-13 10:02:38 +00:00
freebsd/stand/libsa/net.c
Rebecca Cran d5cee48f3e Wait a maximum of 300 seconds for network send/recv in libsa
The reason for this change is that currently, a send/recv
takes many hours to time out.
This is suboptimal in the bootloader because it means for example
that NFS will take hours to fail before allowing subsequent access
methods such as gzip to be tried.

Setting MAXWAIT to 300 seconds (5 minutes) still allows slow
connections of 1Mb to be used to download a 30MB kernel file.

Sponsored by:	Netflix
Differential Revision:	https://reviews.freebsd.org/D18544
2018-12-20 19:27:46 +00:00

303 lines
6.8 KiB
C

/* $NetBSD: net.c,v 1.20 1997/12/26 22:41:30 scottr Exp $ */
/*
* Copyright (c) 1992 Regents of the University of California.
* All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#) Header: net.c,v 1.9 93/08/06 19:32:15 leres Exp (LBL)
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/socket.h>
#include <string.h>
#include <net/if.h>
#include <netinet/in.h>
#include <netinet/if_ether.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
#include "stand.h"
#include "net.h"
/*
* Maximum wait time for sending and receiving before we give up and timeout.
* If set to 0, operations will eventually timeout completely, but send/recv
* timeouts must progress exponentially from MINTMO to MAXTMO before final
* timeout is hit.
*/
#ifndef MAXWAIT
#define MAXWAIT 300 /* seconds */
#endif
#if MAXWAIT < 0
#error MAXWAIT must not be a negative number
#endif
/*
* Send a packet and wait for a reply, with exponential backoff.
*
* The send routine must return the actual number of bytes written,
* or -1 on error.
*
* The receive routine can indicate success by returning the number of
* bytes read; it can return 0 to indicate EOF; it can return -1 with a
* non-zero errno to indicate failure; finally, it can return -1 with a
* zero errno to indicate it isn't done yet.
*/
ssize_t
sendrecv(struct iodesc *d,
ssize_t (*sproc)(struct iodesc *, void *, size_t),
void *sbuf, size_t ssize,
ssize_t (*rproc)(struct iodesc *, void **, void **, time_t, void *),
void **pkt, void **payload, void *recv_extra)
{
ssize_t cc;
time_t t, tmo, tlast;
time_t tref;
long tleft;
#ifdef NET_DEBUG
if (debug)
printf("sendrecv: called\n");
#endif
tmo = MINTMO;
tlast = 0;
tleft = 0;
tref = getsecs();
t = getsecs();
for (;;) {
if (MAXWAIT > 0 && (getsecs() - tref) >= MAXWAIT) {
errno = ETIMEDOUT;
return -1;
}
if (tleft <= 0) {
if (tmo >= MAXTMO) {
errno = ETIMEDOUT;
return -1;
}
cc = (*sproc)(d, sbuf, ssize);
if (cc != -1 && cc < ssize)
panic("sendrecv: short write! (%zd < %zd)",
cc, ssize);
tleft = tmo;
tmo += MINTMO;
if (tmo > MAXTMO)
tmo = MAXTMO;
if (cc == -1) {
/* Error on transmit; wait before retrying */
while ((getsecs() - t) < tmo)
;
tleft = 0;
continue;
}
tlast = t;
}
/* Try to get a packet and process it. */
cc = (*rproc)(d, pkt, payload, tleft, recv_extra);
/* Return on data, EOF or real error. */
if (cc != -1 || (errno != 0 && errno != ETIMEDOUT))
return (cc);
/* Timed out or didn't get the packet we're waiting for */
t = getsecs();
tleft -= t - tlast;
tlast = t;
}
}
/*
* Like inet_addr() in the C library, but we only accept base-10.
* Return values are in network order.
*/
n_long
inet_addr(char *cp)
{
u_long val;
int n;
char c;
u_int parts[4];
u_int *pp = parts;
for (;;) {
/*
* Collect number up to ``.''.
* Values are specified as for C:
* 0x=hex, 0=octal, other=decimal.
*/
val = 0;
while ((c = *cp) != '\0') {
if (c >= '0' && c <= '9') {
val = (val * 10) + (c - '0');
cp++;
continue;
}
break;
}
if (*cp == '.') {
/*
* Internet format:
* a.b.c.d
* a.b.c (with c treated as 16-bits)
* a.b (with b treated as 24 bits)
*/
if (pp >= parts + 3 || val > 0xff)
goto bad;
*pp++ = val, cp++;
} else
break;
}
/*
* Check for trailing characters.
*/
if (*cp != '\0')
goto bad;
/*
* Concoct the address according to
* the number of parts specified.
*/
n = pp - parts + 1;
switch (n) {
case 1: /* a -- 32 bits */
break;
case 2: /* a.b -- 8.24 bits */
if (val > 0xffffff)
goto bad;
val |= parts[0] << 24;
break;
case 3: /* a.b.c -- 8.8.16 bits */
if (val > 0xffff)
goto bad;
val |= (parts[0] << 24) | (parts[1] << 16);
break;
case 4: /* a.b.c.d -- 8.8.8.8 bits */
if (val > 0xff)
goto bad;
val |= (parts[0] << 24) | (parts[1] << 16) | (parts[2] << 8);
break;
}
return (htonl(val));
bad:
return (htonl(INADDR_NONE));
}
char *
inet_ntoa(struct in_addr ia)
{
return (intoa(ia.s_addr));
}
/* Similar to inet_ntoa() */
char *
intoa(n_long addr)
{
char *cp;
u_int byte;
int n;
static char buf[17]; /* strlen(".255.255.255.255") + 1 */
addr = ntohl(addr);
cp = &buf[sizeof buf];
*--cp = '\0';
n = 4;
do {
byte = addr & 0xff;
*--cp = byte % 10 + '0';
byte /= 10;
if (byte > 0) {
*--cp = byte % 10 + '0';
byte /= 10;
if (byte > 0)
*--cp = byte + '0';
}
*--cp = '.';
addr >>= 8;
} while (--n > 0);
return (cp+1);
}
static char *
number(char *s, n_long *n)
{
for (*n = 0; isdigit(*s); s++)
*n = (*n * 10) + *s - '0';
return s;
}
n_long
ip_convertaddr(char *p)
{
#define IP_ANYADDR 0
n_long addr = 0, n;
if (p == NULL || *p == '\0')
return IP_ANYADDR;
p = number(p, &n);
addr |= (n << 24) & 0xff000000;
if (*p == '\0' || *p++ != '.')
return IP_ANYADDR;
p = number(p, &n);
addr |= (n << 16) & 0xff0000;
if (*p == '\0' || *p++ != '.')
return IP_ANYADDR;
p = number(p, &n);
addr |= (n << 8) & 0xff00;
if (*p == '\0' || *p++ != '.')
return IP_ANYADDR;
p = number(p, &n);
addr |= n & 0xff;
if (*p != '\0')
return IP_ANYADDR;
return htonl(addr);
}