1
0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-24 11:29:10 +00:00
freebsd/sys/dev/mii/bmtphy.c
Marius Strobl a16ce54ca6 - Also probe BCM5214 and BCM5222.
- Add some DSP init code for BCM5221. The values derived from Apple's GMAC
  driver and the same init code also exists in Linux's sungem_phy driver.
- Only read media status bits when they are valid.

Obtained from:	NetBSD, OpenBSD
2010-11-22 22:03:11 +00:00

295 lines
7.9 KiB
C

/*-
* Copyright (c) 1998, 1999, 2000, 2001 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Copyright (c) 1997 Manuel Bouyer. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* from: NetBSD: bmtphy.c,v 1.8 2002/07/03 06:25:50 simonb Exp
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the Broadcom BCM5201/BCM5202 "Mini-Theta" PHYs. This also
* drives the PHY on the 3Com 3c905C. The 3c905C's PHY is described in
* the 3c905C data sheet.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include <dev/mii/bmtphyreg.h>
#include "miibus_if.h"
static int bmtphy_probe(device_t);
static int bmtphy_attach(device_t);
struct bmtphy_softc {
struct mii_softc mii_sc;
int mii_model;
};
static device_method_t bmtphy_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, bmtphy_probe),
DEVMETHOD(device_attach, bmtphy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
{ 0, 0 }
};
static devclass_t bmtphy_devclass;
static driver_t bmtphy_driver = {
"bmtphy",
bmtphy_methods,
sizeof(struct bmtphy_softc)
};
DRIVER_MODULE(bmtphy, miibus, bmtphy_driver, bmtphy_devclass, 0, 0);
static int bmtphy_service(struct mii_softc *, struct mii_data *, int);
static void bmtphy_status(struct mii_softc *);
static void bmtphy_reset(struct mii_softc *);
static const struct mii_phydesc bmtphys_dp[] = {
MII_PHY_DESC(BROADCOM, BCM4401),
MII_PHY_DESC(BROADCOM, BCM5201),
MII_PHY_DESC(BROADCOM, BCM5214),
MII_PHY_DESC(BROADCOM, BCM5221),
MII_PHY_DESC(BROADCOM, BCM5222),
MII_PHY_END
};
static const struct mii_phydesc bmtphys_lp[] = {
MII_PHY_DESC(BROADCOM, 3C905B),
MII_PHY_DESC(BROADCOM, 3C905C),
MII_PHY_END
};
static int
bmtphy_probe(device_t dev)
{
int rval;
/* Let exphy(4) take precedence for these. */
rval = mii_phy_dev_probe(dev, bmtphys_lp, BUS_PROBE_LOW_PRIORITY);
if (rval <= 0)
return (rval);
return (mii_phy_dev_probe(dev, bmtphys_dp, BUS_PROBE_DEFAULT));
}
static int
bmtphy_attach(device_t dev)
{
struct bmtphy_softc *bsc;
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
bsc = device_get_softc(dev);
sc = &bsc->mii_sc;
ma = device_get_ivars(dev);
sc->mii_dev = device_get_parent(dev);
mii = ma->mii_data;
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_flags = miibus_get_flags(dev);
sc->mii_inst = mii->mii_instance++;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = bmtphy_service;
sc->mii_pdata = mii;
sc->mii_flags |= MIIF_NOMANPAUSE;
bsc->mii_model = MII_MODEL(ma->mii_id2);
bmtphy_reset(sc);
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
device_printf(dev, " ");
mii_phy_add_media(sc);
printf("\n");
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static int
bmtphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
/*
* If the interface is not up, don't do anything.
*/
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
mii_phy_setmedia(sc);
break;
case MII_TICK:
if (mii_phy_tick(sc) == EJUSTRETURN)
return (0);
break;
}
/* Update the media status. */
bmtphy_status(sc);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return (0);
}
static void
bmtphy_status(struct mii_softc *sc)
{
struct mii_data *mii;
struct ifmedia_entry *ife;
int bmsr, bmcr, aux_csr;
mii = sc->mii_pdata;
ife = mii->mii_media.ifm_cur;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
bmsr = PHY_READ(sc, MII_BMSR) | PHY_READ(sc, MII_BMSR);
if (bmsr & BMSR_LINK)
mii->mii_media_status |= IFM_ACTIVE;
bmcr = PHY_READ(sc, MII_BMCR);
if (bmcr & BMCR_ISO) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if (bmcr & BMCR_LOOP)
mii->mii_media_active |= IFM_LOOP;
if (bmcr & BMCR_AUTOEN) {
/*
* The media status bits are only valid if autonegotiation
* has completed (or it's disabled).
*/
if ((bmsr & BMSR_ACOMP) == 0) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
aux_csr = PHY_READ(sc, MII_BMTPHY_AUX_CSR);
if (aux_csr & AUX_CSR_SPEED)
mii->mii_media_active |= IFM_100_TX;
else
mii->mii_media_active |= IFM_10_T;
if (aux_csr & AUX_CSR_FDX)
mii->mii_media_active |=
IFM_FDX | mii_phy_flowstatus(sc);
else
mii->mii_media_active |= IFM_HDX;
} else
mii->mii_media_active = ife->ifm_media;
}
static void
bmtphy_reset(struct mii_softc *sc)
{
struct bmtphy_softc *bsc;
u_int16_t data;
bsc = (struct bmtphy_softc *)sc;
mii_phy_reset(sc);
if (bsc->mii_model == MII_MODEL_BROADCOM_BCM5221) {
/* Enable shadow register mode. */
data = PHY_READ(sc, 0x1f);
PHY_WRITE(sc, 0x1f, data | 0x0080);
/* Enable APD (Auto PowerDetect). */
data = PHY_READ(sc, MII_BMTPHY_AUX2);
PHY_WRITE(sc, MII_BMTPHY_AUX2, data | 0x0020);
/* Enable clocks across APD for Auto-MDIX functionality. */
data = PHY_READ(sc, MII_BMTPHY_INTR);
PHY_WRITE(sc, MII_BMTPHY_INTR, data | 0x0004);
/* Disable shadow register mode. */
data = PHY_READ(sc, 0x1f);
PHY_WRITE(sc, 0x1f, data & ~0x0080);
}
}