mirror/freebsd
1
0
Fork 0
mirror of https://git.FreeBSD.org/src.git synced 2024-12-23 11:18:54 +00:00
Code Issues Releases Activity
faacdbd9cf
freebsd/sys/arm/ti/ti_gpio.c
Luiz Otavio O Souza 9f16518401 Fix the pin value reading on AM335x. Because of the inverted logic it was 
always returning '0' for all the reads, even for the outputs.  It is now
known to work with gpioiic(4) and gpioled(4).

Approved by:	adrian (mentor)
Tested on:	BBB
2013-12-06 18:09:10 +00:00

816 lines
22 KiB
C
Raw Blame History

/*-
* Copyright (c) 2011
* Ben Gray <ben.r.gray@gmail.com>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/**
* Very simple GPIO (general purpose IO) driver module for TI OMAP SoC's.
*
* Currently this driver only does the basics, get a value on a pin & set a
* value on a pin. Hopefully over time I'll expand this to be a bit more generic
* and support interrupts and other various bits on the SoC can do ... in the
* meantime this is all you get.
*
* Beware the OMA datasheet(s) lists GPIO banks 1-6, whereas I've used 0-5 here
* in the code.
*
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/gpio.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <arm/ti/ti_scm.h>
#include <arm/ti/ti_prcm.h>
#include <dev/fdt/fdt_common.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include "gpio_if.h"
/* Register definitions */
#define TI_GPIO_REVISION 0x0000
#define TI_GPIO_SYSCONFIG 0x0010
#if defined(SOC_OMAP3)
#define TI_GPIO_REVISION 0x0000
#define TI_GPIO_SYSCONFIG 0x0010
#define TI_GPIO_SYSSTATUS 0x0014
#define TI_GPIO_IRQSTATUS1 0x0018
#define TI_GPIO_IRQENABLE1 0x001C
#define TI_GPIO_WAKEUPENABLE 0x0020
#define TI_GPIO_IRQSTATUS2 0x0028
#define TI_GPIO_IRQENABLE2 0x002C
#define TI_GPIO_CTRL 0x0030
#define TI_GPIO_OE 0x0034
#define TI_GPIO_DATAIN 0x0038
#define TI_GPIO_DATAOUT 0x003C
#define TI_GPIO_LEVELDETECT0 0x0040
#define TI_GPIO_LEVELDETECT1 0x0044
#define TI_GPIO_RISINGDETECT 0x0048
#define TI_GPIO_FALLINGDETECT 0x004C
#define TI_GPIO_DEBOUNCENABLE 0x0050
#define TI_GPIO_DEBOUNCINGTIME 0x0054
#define TI_GPIO_CLEARIRQENABLE1 0x0060
#define TI_GPIO_SETIRQENABLE1 0x0064
#define TI_GPIO_CLEARIRQENABLE2 0x0070
#define TI_GPIO_SETIRQENABLE2 0x0074
#define TI_GPIO_CLEARWKUENA 0x0080
#define TI_GPIO_SETWKUENA 0x0084
#define TI_GPIO_CLEARDATAOUT 0x0090
#define TI_GPIO_SETDATAOUT 0x0094
#elif defined(SOC_OMAP4) || defined(SOC_TI_AM335X)
#define TI_GPIO_IRQSTATUS_RAW_0 0x0024
#define TI_GPIO_IRQSTATUS_RAW_1 0x0028
#define TI_GPIO_IRQSTATUS_0 0x002C
#define TI_GPIO_IRQSTATUS_1 0x0030
#define TI_GPIO_IRQSTATUS_SET_0 0x0034
#define TI_GPIO_IRQSTATUS_SET_1 0x0038
#define TI_GPIO_IRQSTATUS_CLR_0 0x003C
#define TI_GPIO_IRQSTATUS_CLR_1 0x0040
#define TI_GPIO_IRQWAKEN_0 0x0044
#define TI_GPIO_IRQWAKEN_1 0x0048
#define TI_GPIO_SYSSTATUS 0x0114
#define TI_GPIO_IRQSTATUS1 0x0118
#define TI_GPIO_IRQENABLE1 0x011C
#define TI_GPIO_WAKEUPENABLE 0x0120
#define TI_GPIO_IRQSTATUS2 0x0128
#define TI_GPIO_IRQENABLE2 0x012C
#define TI_GPIO_CTRL 0x0130
#define TI_GPIO_OE 0x0134
#define TI_GPIO_DATAIN 0x0138
#define TI_GPIO_DATAOUT 0x013C
#define TI_GPIO_LEVELDETECT0 0x0140
#define TI_GPIO_LEVELDETECT1 0x0144
#define TI_GPIO_RISINGDETECT 0x0148
#define TI_GPIO_FALLINGDETECT 0x014C
#define TI_GPIO_DEBOUNCENABLE 0x0150
#define TI_GPIO_DEBOUNCINGTIME 0x0154
#define TI_GPIO_CLEARIRQENABLE1 0x0160
#define TI_GPIO_SETIRQENABLE1 0x0164
#define TI_GPIO_CLEARIRQENABLE2 0x0170
#define TI_GPIO_SETIRQENABLE2 0x0174
#define TI_GPIO_CLEARWKUPENA 0x0180
#define TI_GPIO_SETWKUENA 0x0184
#define TI_GPIO_CLEARDATAOUT 0x0190
#define TI_GPIO_SETDATAOUT 0x0194
#else
#error "Unknown SoC"
#endif
/*Other SoC Specific definitions*/
#if defined(SOC_OMAP3)
#define MAX_GPIO_BANKS 6
#define FIRST_GPIO_BANK 1
#define PINS_PER_BANK 32
#define TI_GPIO_REV 0x00000025
#elif defined(SOC_OMAP4)
#define MAX_GPIO_BANKS 6
#define FIRST_GPIO_BANK 1
#define PINS_PER_BANK 32
#define TI_GPIO_REV 0x50600801
#elif defined(SOC_TI_AM335X)
#define MAX_GPIO_BANKS 4
#define FIRST_GPIO_BANK 0
#define PINS_PER_BANK 32
#define TI_GPIO_REV 0x50600801
#endif
/**
* ti_gpio_mem_spec - Resource specification used when allocating resources
* ti_gpio_irq_spec - Resource specification used when allocating resources
*
* This driver module can have up to six independent memory regions, each
* region typically controls 32 GPIO pins.
*/
static struct resource_spec ti_gpio_mem_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ SYS_RES_MEMORY, 1, RF_ACTIVE | RF_OPTIONAL },
{ SYS_RES_MEMORY, 2, RF_ACTIVE | RF_OPTIONAL },
{ SYS_RES_MEMORY, 3, RF_ACTIVE | RF_OPTIONAL },
#if !defined(SOC_TI_AM335X)
{ SYS_RES_MEMORY, 4, RF_ACTIVE | RF_OPTIONAL },
{ SYS_RES_MEMORY, 5, RF_ACTIVE | RF_OPTIONAL },
#endif
{ -1, 0, 0 }
};
static struct resource_spec ti_gpio_irq_spec[] = {
{ SYS_RES_IRQ, 0, RF_ACTIVE },
{ SYS_RES_IRQ, 1, RF_ACTIVE | RF_OPTIONAL },
{ SYS_RES_IRQ, 2, RF_ACTIVE | RF_OPTIONAL },
{ SYS_RES_IRQ, 3, RF_ACTIVE | RF_OPTIONAL },
#if !defined(SOC_TI_AM335X)
{ SYS_RES_IRQ, 4, RF_ACTIVE | RF_OPTIONAL },
{ SYS_RES_IRQ, 5, RF_ACTIVE | RF_OPTIONAL },
#endif
{ -1, 0, 0 }
};
/**
* Structure that stores the driver context.
*
* This structure is allocated during driver attach.
*/
struct ti_gpio_softc {
device_t sc_dev;
/* The memory resource(s) for the PRCM register set, when the device is
* created the caller can assign up to 4 memory regions.
*/
struct resource* sc_mem_res[MAX_GPIO_BANKS];
struct resource* sc_irq_res[MAX_GPIO_BANKS];
/* The handle for the register IRQ handlers */
void* sc_irq_hdl[MAX_GPIO_BANKS];
/* The following describes the H/W revision of each of the GPIO banks */
uint32_t sc_revision[MAX_GPIO_BANKS];
struct mtx sc_mtx;
};
/**
* Macros for driver mutex locking
*/
#define TI_GPIO_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define TI_GPIO_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define TI_GPIO_LOCK_INIT(_sc) \
mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->sc_dev), \
"ti_gpio", MTX_DEF)
#define TI_GPIO_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx);
#define TI_GPIO_ASSERT_LOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_OWNED);
#define TI_GPIO_ASSERT_UNLOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
/**
* ti_gpio_read_4 - reads a 16-bit value from one of the PADCONFS registers
* @sc: GPIO device context
* @bank: The bank to read from
* @off: The offset of a register from the GPIO register address range
*
*
* RETURNS:
* 32-bit value read from the register.
*/
static inline uint32_t
ti_gpio_read_4(struct ti_gpio_softc *sc, unsigned int bank, bus_size_t off)
{
return (bus_read_4(sc->sc_mem_res[bank], off));
}
/**
* ti_gpio_write_4 - writes a 32-bit value to one of the PADCONFS registers
* @sc: GPIO device context
* @bank: The bank to write to
* @off: The offset of a register from the GPIO register address range
* @val: The value to write into the register
*
* RETURNS:
* nothing
*/
static inline void
ti_gpio_write_4(struct ti_gpio_softc *sc, unsigned int bank, bus_size_t off,
uint32_t val)
{
bus_write_4(sc->sc_mem_res[bank], off, val);
}
/**
* ti_gpio_pin_max - Returns the maximum number of GPIO pins
* @dev: gpio device handle
* @maxpin: pointer to a value that upon return will contain the maximum number
* of pins in the device.
*
*
* LOCKING:
* Internally locks the context
*
* RETURNS:
* Returns 0 on success otherwise an error code
*/
static int
ti_gpio_pin_max(device_t dev, int *maxpin)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
unsigned int i;
unsigned int banks = 0;
TI_GPIO_LOCK(sc);
/* Calculate how many valid banks we have and then multiply that by 32 to
* give use the total number of pins.
*/
for (i = 0; i < MAX_GPIO_BANKS; i++) {
if (sc->sc_mem_res[i] != NULL)
banks++;
}
*maxpin = (banks * PINS_PER_BANK) - 1;
TI_GPIO_UNLOCK(sc);
return (0);
}
/**
* ti_gpio_pin_getcaps - Gets the capabilties of a given pin
* @dev: gpio device handle
* @pin: the number of the pin
* @caps: pointer to a value that upon return will contain the capabilities
*
* Currently all pins have the same capability, notably:
* - GPIO_PIN_INPUT
* - GPIO_PIN_OUTPUT
* - GPIO_PIN_PULLUP
* - GPIO_PIN_PULLDOWN
*
* LOCKING:
* Internally locks the context
*
* RETURNS:
* Returns 0 on success otherwise an error code
*/
static int
ti_gpio_pin_getcaps(device_t dev, uint32_t pin, uint32_t *caps)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
uint32_t bank = (pin / PINS_PER_BANK);
TI_GPIO_LOCK(sc);
/* Sanity check the pin number is valid */
if ((bank >= MAX_GPIO_BANKS) || (sc->sc_mem_res[bank] == NULL)) {
TI_GPIO_UNLOCK(sc);
return (EINVAL);
}
*caps = (GPIO_PIN_INPUT | GPIO_PIN_OUTPUT |GPIO_PIN_PULLUP |
GPIO_PIN_PULLDOWN);
TI_GPIO_UNLOCK(sc);
return (0);
}
/**
* ti_gpio_pin_getflags - Gets the current flags of a given pin
* @dev: gpio device handle
* @pin: the number of the pin
* @flags: upon return will contain the current flags of the pin
*
* Reads the current flags of a given pin, here we actually read the H/W
* registers to determine the flags, rather than storing the value in the
* setflags call.
*
* LOCKING:
* Internally locks the context
*
* RETURNS:
* Returns 0 on success otherwise an error code
*/
static int
ti_gpio_pin_getflags(device_t dev, uint32_t pin, uint32_t *flags)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
uint32_t bank = (pin / PINS_PER_BANK);
TI_GPIO_LOCK(sc);
/* Sanity check the pin number is valid */
if ((bank >= MAX_GPIO_BANKS) || (sc->sc_mem_res[bank] == NULL)) {
TI_GPIO_UNLOCK(sc);
return (EINVAL);
}
/* Get the current pin state */
ti_scm_padconf_get_gpioflags(pin, flags);
TI_GPIO_UNLOCK(sc);
return (0);
}
/**
* ti_gpio_pin_getname - Gets the name of a given pin
* @dev: gpio device handle
* @pin: the number of the pin
* @name: buffer to put the name in
*
* The driver simply calls the pins gpio_n, where 'n' is obviously the number
* of the pin.
*
* LOCKING:
* Internally locks the context
*
* RETURNS:
* Returns 0 on success otherwise an error code
*/
static int
ti_gpio_pin_getname(device_t dev, uint32_t pin, char *name)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
uint32_t bank = (pin / PINS_PER_BANK);
TI_GPIO_LOCK(sc);
/* Sanity check the pin number is valid */
if ((bank >= MAX_GPIO_BANKS) || (sc->sc_mem_res[bank] == NULL)) {
TI_GPIO_UNLOCK(sc);
return (EINVAL);
}
/* Set a very simple name */
snprintf(name, GPIOMAXNAME, "gpio_%u", pin);
name[GPIOMAXNAME - 1] = '\0';
TI_GPIO_UNLOCK(sc);
return (0);
}
/**
* ti_gpio_pin_setflags - Sets the flags for a given pin
* @dev: gpio device handle
* @pin: the number of the pin
* @flags: the flags to set
*
* The flags of the pin correspond to things like input/output mode, pull-ups,
* pull-downs, etc. This driver doesn't support all flags, only the following:
* - GPIO_PIN_INPUT
* - GPIO_PIN_OUTPUT
* - GPIO_PIN_PULLUP
* - GPIO_PIN_PULLDOWN
*
* LOCKING:
* Internally locks the context
*
* RETURNS:
* Returns 0 on success otherwise an error code
*/
static int
ti_gpio_pin_setflags(device_t dev, uint32_t pin, uint32_t flags)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
uint32_t bank = (pin / PINS_PER_BANK);
uint32_t mask = (1UL << (pin % PINS_PER_BANK));
uint32_t reg_val;
/* Sanity check the flags supplied are valid, i.e. not input and output */
if ((flags & (GPIO_PIN_INPUT|GPIO_PIN_OUTPUT)) == 0x0000)
return (EINVAL);
if ((flags & (GPIO_PIN_INPUT|GPIO_PIN_OUTPUT)) ==
(GPIO_PIN_INPUT|GPIO_PIN_OUTPUT))
return (EINVAL);
if ((flags & (GPIO_PIN_PULLUP|GPIO_PIN_PULLDOWN)) ==
(GPIO_PIN_PULLUP|GPIO_PIN_PULLDOWN))
return (EINVAL);
TI_GPIO_LOCK(sc);
/* Sanity check the pin number is valid */
if ((bank >= MAX_GPIO_BANKS) || (sc->sc_mem_res[bank] == NULL)) {
TI_GPIO_UNLOCK(sc);
return (EINVAL);
}
/* Set the GPIO mode and state */
if (ti_scm_padconf_set_gpioflags(pin, flags) != 0) {
TI_GPIO_UNLOCK(sc);
return (EINVAL);
}
/* If configuring as an output set the "output enable" bit */
reg_val = ti_gpio_read_4(sc, bank, TI_GPIO_OE);
if (flags & GPIO_PIN_INPUT)
reg_val |= mask;
else
reg_val &= ~mask;
ti_gpio_write_4(sc, bank, TI_GPIO_OE, reg_val);
TI_GPIO_UNLOCK(sc);
return (0);
}
/**
* ti_gpio_pin_set - Sets the current level on a GPIO pin
* @dev: gpio device handle
* @pin: the number of the pin
* @value: non-zero value will drive the pin high, otherwise the pin is
* driven low.
*
*
* LOCKING:
* Internally locks the context
*
* RETURNS:
* Returns 0 on success otherwise a error code
*/
static int
ti_gpio_pin_set(device_t dev, uint32_t pin, unsigned int value)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
uint32_t bank = (pin / PINS_PER_BANK);
uint32_t mask = (1UL << (pin % PINS_PER_BANK));
TI_GPIO_LOCK(sc);
/* Sanity check the pin number is valid */
if ((bank >= MAX_GPIO_BANKS) || (sc->sc_mem_res[bank] == NULL)) {
TI_GPIO_UNLOCK(sc);
return (EINVAL);
}
ti_gpio_write_4(sc, bank, (value == GPIO_PIN_LOW) ? TI_GPIO_CLEARDATAOUT
: TI_GPIO_SETDATAOUT, mask);
TI_GPIO_UNLOCK(sc);
return (0);
}
/**
* ti_gpio_pin_get - Gets the current level on a GPIO pin
* @dev: gpio device handle
* @pin: the number of the pin
* @value: pointer to a value that upond return will contain the pin value
*
* The pin must be configured as an input pin beforehand, otherwise this
* function will fail.
*
* LOCKING:
* Internally locks the context
*
* RETURNS:
* Returns 0 on success otherwise a error code
*/
static int
ti_gpio_pin_get(device_t dev, uint32_t pin, unsigned int *value)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
uint32_t bank = (pin / PINS_PER_BANK);
uint32_t mask = (1UL << (pin % PINS_PER_BANK));
uint32_t val = 0;
TI_GPIO_LOCK(sc);
/* Sanity check the pin number is valid */
if ((bank >= MAX_GPIO_BANKS) || (sc->sc_mem_res[bank] == NULL)) {
TI_GPIO_UNLOCK(sc);
return (EINVAL);
}
/* Sanity check the pin is not configured as an output */
val = ti_gpio_read_4(sc, bank, TI_GPIO_OE);
/* Read the value on the pin */
if (val & mask)
*value = (ti_gpio_read_4(sc, bank, TI_GPIO_DATAIN) & mask) ? 1 : 0;
else
*value = (ti_gpio_read_4(sc, bank, TI_GPIO_DATAOUT) & mask) ? 1 : 0;
TI_GPIO_UNLOCK(sc);
return (0);
}
/**
* ti_gpio_pin_toggle - Toggles a given GPIO pin
* @dev: gpio device handle
* @pin: the number of the pin
*
*
* LOCKING:
* Internally locks the context
*
* RETURNS:
* Returns 0 on success otherwise a error code
*/
static int
ti_gpio_pin_toggle(device_t dev, uint32_t pin)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
uint32_t bank = (pin / PINS_PER_BANK);
uint32_t mask = (1UL << (pin % PINS_PER_BANK));
uint32_t val;
TI_GPIO_LOCK(sc);
/* Sanity check the pin number is valid */
if ((bank >= MAX_GPIO_BANKS) || (sc->sc_mem_res[bank] == NULL)) {
TI_GPIO_UNLOCK(sc);
return (EINVAL);
}
/* Toggle the pin */
val = ti_gpio_read_4(sc, bank, TI_GPIO_DATAOUT);
if (val & mask)
ti_gpio_write_4(sc, bank, TI_GPIO_CLEARDATAOUT, mask);
else
ti_gpio_write_4(sc, bank, TI_GPIO_SETDATAOUT, mask);
TI_GPIO_UNLOCK(sc);
return (0);
}
/**
* ti_gpio_intr - ISR for all GPIO modules
* @arg: the soft context pointer
*
* Unsused
*
* LOCKING:
* Internally locks the context
*
*/
static void
ti_gpio_intr(void *arg)
{
struct ti_gpio_softc *sc = arg;
TI_GPIO_LOCK(sc);
/* TODO: something useful */
TI_GPIO_UNLOCK(sc);
}
/**
* ti_gpio_probe - probe function for the driver
* @dev: gpio device handle
*
* Simply sets the name of the driver
*
* LOCKING:
* None
*
* RETURNS:
* Always returns 0
*/
static int
ti_gpio_probe(device_t dev)
{
if (!ofw_bus_is_compatible(dev, "ti,gpio"))
return (ENXIO);
device_set_desc(dev, "TI General Purpose I/O (GPIO)");
return (0);
}
/**
* ti_gpio_attach - attach function for the driver
* @dev: gpio device handle
*
* Allocates and sets up the driver context for all GPIO banks. This function
* expects the memory ranges and IRQs to already be allocated to the driver.
*
* LOCKING:
* None
*
* RETURNS:
* Always returns 0
*/
static int
ti_gpio_attach(device_t dev)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
unsigned int i;
int err = 0;
int pin;
uint32_t flags;
uint32_t reg_oe;
sc->sc_dev = dev;
TI_GPIO_LOCK_INIT(sc);
/* There are up to 6 different GPIO register sets located in different
* memory areas on the chip. The memory range should have been set for
* the driver when it was added as a child.
*/
err = bus_alloc_resources(dev, ti_gpio_mem_spec, sc->sc_mem_res);
if (err) {
device_printf(dev, "Error: could not allocate mem resources\n");
return (ENXIO);
}
/* Request the IRQ resources */
err = bus_alloc_resources(dev, ti_gpio_irq_spec, sc->sc_irq_res);
if (err) {
device_printf(dev, "Error: could not allocate irq resources\n");
return (ENXIO);
}
/* Setup the IRQ resources */
for (i = 0; i < MAX_GPIO_BANKS; i++) {
if (sc->sc_irq_res[i] == NULL)
break;
/* Register an interrupt handler for each of the IRQ resources */
if ((bus_setup_intr(dev, sc->sc_irq_res[i], INTR_TYPE_MISC | INTR_MPSAFE,
NULL, ti_gpio_intr, sc, &(sc->sc_irq_hdl[i])))) {
device_printf(dev, "WARNING: unable to register interrupt handler\n");
return (ENXIO);
}
}
/* Store the device handle back in the sc */
sc->sc_dev = dev;
/* We need to go through each block and ensure the clocks are running and
* the module is enabled. It might be better to do this only when the
* pins are configured which would result in less power used if the GPIO
* pins weren't used ...
*/
for (i = 0; i < MAX_GPIO_BANKS; i++) {
if (sc->sc_mem_res[i] != NULL) {
/* Enable the interface and functional clocks for the module */
ti_prcm_clk_enable(GPIO0_CLK + FIRST_GPIO_BANK + i);
/* Read the revision number of the module. TI don't publish the
* actual revision numbers, so instead the values have been
* determined by experimentation.
*/
sc->sc_revision[i] = ti_gpio_read_4(sc, i, TI_GPIO_REVISION);
/* Check the revision */
if (sc->sc_revision[i] != TI_GPIO_REV) {
device_printf(dev, "Warning: could not determine the revision"
"of %u GPIO module (revision:0x%08x)\n",
i, sc->sc_revision[i]);
continue;
}
/* Disable interrupts for all pins */
ti_gpio_write_4(sc, i, TI_GPIO_CLEARIRQENABLE1, 0xffffffff);
ti_gpio_write_4(sc, i, TI_GPIO_CLEARIRQENABLE2, 0xffffffff);
/* Init OE register based on pads configuration */
reg_oe = 0xffffffff;
for (pin = 0; pin < 32; pin++) {
ti_scm_padconf_get_gpioflags(
PINS_PER_BANK*i + pin, &flags);
if (flags & GPIO_PIN_OUTPUT)
reg_oe &= ~(1U << pin);
}
ti_gpio_write_4(sc, i, TI_GPIO_OE, reg_oe);
}
}
/* Finish of the probe call */
device_add_child(dev, "gpioc", device_get_unit(dev));
device_add_child(dev, "gpiobus", device_get_unit(dev));
return (bus_generic_attach(dev));
}
/**
* ti_gpio_detach - detach function for the driver
* @dev: scm device handle
*
* Allocates and sets up the driver context, this simply entails creating a
* bus mappings for the SCM register set.
*
* LOCKING:
* None
*
* RETURNS:
* Always returns 0
*/
static int
ti_gpio_detach(device_t dev)
{
struct ti_gpio_softc *sc = device_get_softc(dev);
unsigned int i;
KASSERT(mtx_initialized(&sc->sc_mtx), ("gpio mutex not initialized"));
/* Disable all interrupts */
for (i = 0; i < MAX_GPIO_BANKS; i++) {
if (sc->sc_mem_res[i] != NULL) {
ti_gpio_write_4(sc, i, TI_GPIO_CLEARIRQENABLE1, 0xffffffff);
ti_gpio_write_4(sc, i, TI_GPIO_CLEARIRQENABLE2, 0xffffffff);
}
}
bus_generic_detach(dev);
/* Release the memory and IRQ resources */
for (i = 0; i < MAX_GPIO_BANKS; i++) {
if (sc->sc_mem_res[i] != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, i, sc->sc_mem_res[i]);
if (sc->sc_irq_res[i] != NULL)
bus_release_resource(dev, SYS_RES_IRQ, i, sc->sc_irq_res[i]);
}
TI_GPIO_LOCK_DESTROY(sc);
return(0);
}
static device_method_t ti_gpio_methods[] = {
DEVMETHOD(device_probe, ti_gpio_probe),
DEVMETHOD(device_attach, ti_gpio_attach),
DEVMETHOD(device_detach, ti_gpio_detach),
/* GPIO protocol */
DEVMETHOD(gpio_pin_max, ti_gpio_pin_max),
DEVMETHOD(gpio_pin_getname, ti_gpio_pin_getname),
DEVMETHOD(gpio_pin_getflags, ti_gpio_pin_getflags),
DEVMETHOD(gpio_pin_getcaps, ti_gpio_pin_getcaps),
DEVMETHOD(gpio_pin_setflags, ti_gpio_pin_setflags),
DEVMETHOD(gpio_pin_get, ti_gpio_pin_get),
DEVMETHOD(gpio_pin_set, ti_gpio_pin_set),
DEVMETHOD(gpio_pin_toggle, ti_gpio_pin_toggle),
{0, 0},
};
static driver_t ti_gpio_driver = {
"gpio",
ti_gpio_methods,
sizeof(struct ti_gpio_softc),
};
static devclass_t ti_gpio_devclass;
DRIVER_MODULE(ti_gpio, simplebus, ti_gpio_driver, ti_gpio_devclass, 0, 0);
Reference in New Issue View Git Blame Copy Permalink